Online defrag operations for ext4 are hard coded to use the page cache.
See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page()
When combined with DAX I/O, which circumvents the page cache, this can
result in data corruption. This was observed with xfstests ext4/307 and
ext4/308.
Fix this by only allowing online defrag for non-DAX files.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When S_DAX is set on an inode we assume that if there are pages attached
to the mapping (mapping->nrpages != 0), those pages are clean zero pages
that were used to service reads from holes. Any dirty data associated
with the inode should be in the form of DAX exceptional entries
(mapping->nrexceptional) that is written back via
dax_writeback_mapping_range().
With the current code, though, this isn't always true. For example,
ext2 and ext4 directory inodes can have S_DAX set, but have their dirty
data stored as dirty page cache entries. For these types of inodes,
having S_DAX set doesn't really make sense since their I/O doesn't
actually happen through the DAX code path.
Instead, only allow S_DAX to be set for regular inodes for ext2 and
ext4. This allows us to have strict DAX vs non-DAX paths in the
writeback code.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent *sync enabling discovered that we are inserting into the
block_device pagecache counter to the expectations of the dirty data
tracking for dax mappings. This can lead to data corruption.
We want to support DAX for block devices eventually, but it requires
wider changes to properly manage the pagecache.
dump_stack+0x85/0xc2
dax_writeback_mapping_range+0x60/0xe0
blkdev_writepages+0x3f/0x50
do_writepages+0x21/0x30
__filemap_fdatawrite_range+0xc6/0x100
filemap_write_and_wait+0x4a/0xa0
set_blocksize+0x70/0xd0
sb_set_blocksize+0x1d/0x50
ext4_fill_super+0x75b/0x3360
mount_bdev+0x180/0x1b0
ext4_mount+0x15/0x20
mount_fs+0x38/0x170
Mark the support broken so its disabled by default, but otherwise still
available for testing.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When doing append direct io cleanup, if deleting inode fails, it goes
out without unlocking inode, which will cause the inode deadlock.
This issue was introduced by commit cf1776a9e8 ("ocfs2: fix a tiny
race when truncate dio orohaned entry").
Signed-off-by: Guozhonghua <guozhonghua@h3c.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace calls to get_random_int() followed by a cast to (unsigned long)
with calls to get_random_long(). Also address shifting bug which, in
case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits.
Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d07e22597d ("mm: mmap: add new /proc tunable for mmap_base
ASLR") added the ability to choose from a range of values to use for
entropy count in generating the random offset to the mmap_base address.
The maximum value on this range was set to 32 bits for 64-bit x86
systems, but this value could be increased further, requiring more than
the 32 bits of randomness provided by get_random_int(), as is already
possible for arm64. Add a new function: get_random_long() which more
naturally fits with the mmap usage of get_random_int() but operates
exactly the same as get_random_int().
Also, fix the shifting constant in mmap_rnd() to be an unsigned long so
that values greater than 31 bits generate an appropriate mask without
overflow. This is especially important on x86, as its shift instruction
uses a 5-bit mask for the shift operand, which meant that any value for
mmap_rnd_bits over 31 acts as a no-op and effectively disables mmap_base
randomization.
Finally, replace calls to get_random_int() with get_random_long() where
appropriate.
This patch (of 2):
Add get_random_long().
Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4167e9b2cf ("mm: remove GFP_THISNODE") removed the GFP_THISNODE
flag combination due to confusing semantics. It noted that
alloc_misplaced_dst_page() was one such user after changes made by
commit e97ca8e5b8 ("mm: fix GFP_THISNODE callers and clarify").
Unfortunately when GFP_THISNODE was removed, users of
alloc_misplaced_dst_page() started waking kswapd and entering direct
reclaim because the wrong GFP flags are cleared. The consequence is
that workloads that used to fit into memory now get reclaimed which is
addressed by this patch.
The problem can be demonstrated with "mutilate" that exercises memcached
which is software dedicated to memory object caching. The configuration
uses 80% of memory and is run 3 times for varying numbers of clients.
The results on a 4-socket NUMA box are
mutilate
4.4.0 4.4.0
vanilla numaswap-v1
Hmean 1 8394.71 ( 0.00%) 8395.32 ( 0.01%)
Hmean 4 30024.62 ( 0.00%) 34513.54 ( 14.95%)
Hmean 7 32821.08 ( 0.00%) 70542.96 (114.93%)
Hmean 12 55229.67 ( 0.00%) 93866.34 ( 69.96%)
Hmean 21 39438.96 ( 0.00%) 85749.21 (117.42%)
Hmean 30 37796.10 ( 0.00%) 50231.49 ( 32.90%)
Hmean 47 18070.91 ( 0.00%) 38530.13 (113.22%)
The metric is queries/second with the more the better. The results are
way outside of the noise and the reason for the improvement is obvious
from some of the vmstats
4.4.0 4.4.0
vanillanumaswap-v1r1
Minor Faults 1929399272 2146148218
Major Faults 19746529 3567
Swap Ins 57307366 9913
Swap Outs 50623229 17094
Allocation stalls 35909 443
DMA allocs 0 0
DMA32 allocs 72976349 170567396
Normal allocs 5306640898 5310651252
Movable allocs 0 0
Direct pages scanned 404130893 799577
Kswapd pages scanned 160230174 0
Kswapd pages reclaimed 55928786 0
Direct pages reclaimed 1843936 41921
Page writes file 2391 0
Page writes anon 50623229 17094
The vanilla kernel is swapping like crazy with large amounts of direct
reclaim and kswapd activity. The figures are aggregate but it's known
that the bad activity is throughout the entire test.
Note that simple streaming anon/file memory consumers also see this
problem but it's not as obvious. In those cases, kswapd is awake when
it should not be.
As there are at least two reclaim-related bugs out there, it's worth
spelling out the user-visible impact. This patch only addresses bugs
related to excessive reclaim on NUMA hardware when the working set is
larger than a NUMA node. There is a bug related to high kswapd CPU
usage but the reports are against laptops and other UMA hardware and is
not addressed by this patch.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pmd_trans_unstable()/pmd_none_or_trans_huge_or_clear_bad() were
introduced to locklessy (but atomically) detect when a pmd is a regular
(stable) pmd or when the pmd is unstable and can infinitely transition
from pmd_none() and pmd_trans_huge() from under us, while only holding
the mmap_sem for reading (for writing not).
While holding the mmap_sem only for reading, MADV_DONTNEED can run from
under us and so before we can assume the pmd to be a regular stable pmd
we need to compare it against pmd_none() and pmd_trans_huge() in an
atomic way, with pmd_trans_unstable(). The old pmd_trans_huge() left a
tiny window for a race.
Useful applications are unlikely to notice the difference as doing
MADV_DONTNEED concurrently with a page fault would lead to undefined
behavior.
[akpm@linux-foundation.org: tidy up comment grammar/layout]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull Ceph fixes from Sage Weil:
"There are two small messenger bug fixes and a log spam regression fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: don't spam dmesg with stray reply warnings
libceph: use the right footer size when skipping a message
libceph: don't bail early from try_read() when skipping a message
Things got calmed down for rc6, as it seems, and we have only a few
HD-audio fixes at this time: a fix for Skylake codec probe errors,
a fix for missing interrupt handling, and a few Dell and HP quirks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=HCiU
-----END PGP SIGNATURE-----
Merge tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Things got calmed down for rc6, as it seems, and we have only a few
HD-audio fixes at this time: a fix for Skylake codec probe errors, a
fix for missing interrupt handling, and a few Dell and HP quirks"
* tag 'sound-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Loop interrupt handling until really cleared
ALSA: hda - Fix headset support and noise on HP EliteBook 755 G2
ALSA: hda - Fixup speaker pass-through control for nid 0x14 on ALC225
ALSA: hda - Fixing background noise on Dell Inspiron 3162
ALSA: hda - Apply clock gate workaround to Skylake, too
- Revert an ACPI core change related to IRQ management in PCI
that introduced code relying on the use of kmalloc() which
turned out to also run during early init when that's not
available yet and caused some systems to crash on boot for
this reason along with a cleanup on top of it (Rafael Wysocki).
- Prevent devfreq from flooding the kernel log with useless
messages on Tegra (which started to happen after some recent
changes in the devfreq core) by fixing the driver to follow
the documentation and the core's expectations in its ->target
callback (Tomeu Vizoso).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=SW0x
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are two reverts of recent PCI-related ACPI core changes (one of
which caused some systems to crash on boot and the other was a cleanup
on top of it) and a devfreq fix for Tegra.
Specifics:
- Revert an ACPI core change related to IRQ management in PCI that
introduced code relying on the use of kmalloc() which turned out to
also run during early init when that's not available yet and caused
some systems to crash on boot for this reason along with a cleanup
on top of it (Rafael Wysocki).
- Prevent devfreq from flooding the kernel log with useless messages
on Tegra (which started to happen after some recent changes in the
devfreq core) by fixing the driver to follow the documentation and
the core's expectations in its ->target callback (Tomeu Vizoso)"
* tag 'pm+acpi-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI, PCI, irq: remove interrupt count restriction"
Revert "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
PM / devfreq: tegra: Set freq in rate callback
Currently the interrupt handler of HD-audio driver assumes that no irq
update is needed while processing the irq. But in reality, it has
been confirmed that the HW irq is issued even during the irq
handling. Since we clear the irq status at the beginning, process the
interrupt, then exits from the handler, the lately issued interrupt is
left untouched without being properly processed.
This patch changes the interrupt handler code to loop over the
check-and-process. The handler tries repeatedly as long as the IRQ
status are turned on, and either stream or CORB/RIRB is handled.
For checking the stream handling, snd_hdac_bus_handle_stream_irq()
returns a value indicating the stream indices bits. Other than that,
the change is only in the irq handler itself.
Reported-by: Libin Yang <libin.yang@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When perf added a "reg" function to the function tracing event (not a
tracepoint), it caused that event to be displayed as a tracepoint and
could cause errors in tracepoint handling. That was solved by adding a
flag to ignore ftrace non-tracepoint events. But that flag was missed
when displaying events in available_events, which should only contain
tracepoint events.
This broke a documented way to enable all events with:
cat available_events > set_event
As the function non-tracepoint event would cause that to error out.
The commit here fixes that by having the available_events file not list
events that have the ignore flag set.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWzxLPAAoJEKKk/i67LK/8uAMH+gPedE1YbBmhFOgOEEyjADsV
AJ/XRkqHhNyjB5h05jvO9KeoaEL27E0unvRNIKFjeKoco1fqQ5USMXr1hdOpQKt6
X16478XGWiZI2w11Yp86UmhrzVFmRcCv1zSIhTFhidOIQVwu6aUSRA3DchaBXCez
nzQBgRUzsHLWhS1tRNtdnf6gRe6PSImjwmpyYETPzzatedAW4D1Xp+u+7z2uKXka
jJIaE90hYDCT08+6Q+QeD1RR2Uzh+E72ZhM5wCcnuwKd5BfxLcZs23PCIlZjX24k
Iu2hPeW1VVIN/mbqY04R4oAKRXJG8Wio8l1S5ldJTPReBCZLDK5N2O+LWPwIEIU=
=Ypbd
-----END PGP SIGNATURE-----
Merge tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Another small bug reported to me by Chunyu Hu.
When perf added a "reg" function to the function tracing event (not a
tracepoint), it caused that event to be displayed as a tracepoint and
could cause errors in tracepoint handling. That was solved by adding
a flag to ignore ftrace non-tracepoint events. But that flag was
missed when displaying events in available_events, which should only
contain tracepoint events.
This broke a documented way to enable all events with:
cat available_events > set_event
As the function non-tracepoint event would cause that to error out.
The commit here fixes that by having the available_events file not
list events that have the ignore flag set"
* tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix showing function event in available_events
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
KVM/x86 fixes:
- Fix ubsan warning
- Fix hardware breakpoints in a guest vs. preempt notifiers
- Fix Hurd
Generic:
- use __GFP_NOWARN together with GFP_NOWAIT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJWzsReAAoJEL/70l94x66DT6cH/3K/X/eciQIQTjLWKQ9BUhsN
+4WN+PX51GCvRZgoGgXXxTUzWVpSHNE7iD5FR/yqiUpC6lq+GWYKyQYBU6S2tw7N
QrzVFUAOIAExfzw4ztLz8pvIIwsF6EC2sA0DRZO85FWApO4P3BJN/1nBa+THJchH
6RamguztCjVSfboFwpulPzmgzJwIQ1ai+KoO1z/1ifrxjOHLytF5wn6UegPXIkc6
PAWG0b6w2ZnSwTNhEdsjzlcEANd/otwOoTlcft//KLuBkSS0GgU3vgxv7OXeSn67
+Wa9wWT/rU6M4Ol0noXcyr/kiF5629bQ4IyLK7YFgOUPFt4Tmg+A1ABGc92WJa4=
=/9Sf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"KVM/ARM fixes:
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
KVM/x86 fixes:
- Fix ubsan warning
- Fix hardware breakpoints in a guest vs. preempt notifiers
- Fix Hurd
Generic:
- use __GFP_NOWARN together with GFP_NOWAIT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: MMU: fix ubsan index-out-of-range warning
arm64: KVM: vgic-v3: Restore ICH_APR0Rn_EL2 before ICH_APR1Rn_EL2
KVM: async_pf: do not warn on page allocation failures
KVM: x86: fix conversion of addresses to linear in 32-bit protected mode
KVM: x86: fix missed hardware breakpoints
arm/arm64: KVM: Feed initialized memory to MMIO accesses
KVM: arm/arm64: vgic: Ensure bitmaps are long enough
Pull s390 bugfixes from Martin Schwidefsky:
"Two critical bug fixes for the signal handling"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/fpu: signals vs. floating point control register
s390/compat: correct restore of high gprs on signal return
in case of unusually long writes to some system interfaces used by
mountd and other nfs support utilities.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ezck
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"One fix for a bug that could cause a NULL write past the end of a
buffer in case of unusually long writes to some system interfaces used
by mountd and other nfs support utilities"
* tag 'nfsd-4.5-1' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: fix off-by-one in qword_get()
Pull drm fixes from Dave Airlie:
"This is a bit larger than Id like, but I asked the Intel guys to pull
in some Skylake fixes in the possibly vain hope that Skylake might be
more functional now that I'm seeing production hardware shipping.
For i915, it's mostly the same patch in a few places, making sure the
hw doesn't turn off when we are programming it.
Apart from that are two nouveau fixes, one for a module defer bug, and
one for using nouveau on new Lenovo P50 models.
Then there are a bunch of AMDGPU fixes, one is a fix for v4.4 vblank
regressions, and some PM fixes"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits)
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
drm/nouveau: platform: Fix deferred probe
drm/amdgpu: disable direct VM updates when vm_debug is set
amdgpu: fix NULL pointer dereference at tonga_check_states_equal
drm/i915/gen9: Verify and enforce dc6 state writes
drm/i915/gen9: Check for DC state mismatch
drm/radeon/pm: adjust display configuration after powerstate
drm/amdgpu/pm: adjust display configuration after powerstate
drm/amdgpu/pm: add some checks for PX
drm/amdgpu: fix locking in force performance level
drm/amdgpu/gfx8: fix priv reg interrupt enable
drm/i915/skl: Ensure HW is powered during DDB HW state readout
drm/i915/lvds: Ensure the HW is powered during HW state readout
drm/i915/hdmi: Ensure the HW is powered during HW state readout
drm/i915/dsi: Ensure the HW is powered during HW state readout
drm/i915/dp: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered when accessing the CRC HW block
drm/i915/ddi: Ensure the HW is powered during HW state readout
drm/i915/crt: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered during HW access in assert_pipe
...
Pull libnvdimm fixes from Dan Williams:
- Two fixes for compatibility with the ACPI 6.1 specification.
Without these fixes multi-interface DIMMs will fail to be probed, and
address range scrub commands to find memory errors will give results
that the kernel will mis-interpret. For multi-interface DIMMs Linux
will accept either the original 6.0 implementation or 6.1.
For address range scrub we'll only support 6.1 since ACPI formalized
this DSM differently than the original example [1] implemented in
v4.2. The expectation is that production systems will only ever ship
the ACPI 6.1 address range scrub command definition.
- The wider async address range scrub work targeting 4.6 discovered
that the original synchronous implementation in 4.5 is not sizing its
return buffer correctly.
- Arnd caught that my recent fix to the size of the pfn_t flags missed
updating the flags variable used in the pmem driver.
- Toshi found that we mishandle the memremap() return value in
devm_memremap().
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: use 'u64' for pfn flags
devm_memremap: Fix error value when memremap failed
nfit: update address range scrub commands to the acpi 6.1 format
libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing
nfit: fix multi-interface dimm handling, acpi6.1 compatibility
Add a regression fix for changed sysfs path of
bq27xxx_battery and update MAINTAINERS file.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wLVt
-----END PGP SIGNATURE-----
Merge tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Add a regression fix for changed sysfs path of bq27xxx_battery and
update MAINTAINERS file"
* tag 'for-v4.5-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: bq27xxx_battery: Restore device name
MAINTAINERS: update bq27xxx driver
HP EliteBook 755 G2 with ALC3228 (ALC280) codec [103c:221c] requires
the known fixup (ALC269_FIXUP_HEADSET_MIC) for making the headset mic
working. Also, it suffers from the loopback noise problem, so we
should disable aamix path as well.
Reported-by: Derick Eddington <derick.eddington@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On one of the machines we enable, we found that the actual speaker volume
did not always correspond to the volume set in alsamixer. This patch
fixes that problem.
This patch was orginally written by Kailang @ Realtek, I've rebased it
to fit sound git master.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1549660
Co-Authored-By: Kailang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/Pum
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/ARM fixes for 4.5-rc6
- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
After login to the desktop on Dell Inspiron 3162,
there's a very loud background noise comes from the builtin speaker.
The noise does not go away even if the speaker is muted.
The noise disappears after using the aamix fixup.
Codec: Realtek ALC3234
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0255
Subsystem Id: 0x10280725
Revision Id: 0x100002
No Modem Function Group found
BugLink: http://bugs.launchpad.net/bugs/1549620
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
single for for eDP panel issues on Lenovo P50
* 'linux-4.5' of git://github.com/skeggsb/linux:
drm/nouveau/disp/dp: ensure sink is powered up before attempting link training
This can happen under some annoying circumstances, and is a quick fix
until more substantial changes can be made.
Fixed eDP mode changes on (at least) the Lenovo P50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
CONFIG_ARCH_SHMOBILE is not only enabled for Renesas ARM platforms
(which are DT based and multi-platform), but also on a select set of
Renesas SuperH platforms (SH7722/SH7723/SH7724/SH7343/SH7366). Hence
since commit 0ba58de231 ("drivers: sh: Get rid of
CONFIG_ARCH_SHMOBILE_MULTI"), the legacy clock domain is no longer
installed on these SuperH platforms, and module clocks may not be
enabled when needed, leading to driver failures.
To fix this, add an additional check for CONFIG_OF.
Fixes: 0ba58de231 ("drivers: sh: Get rid of CONFIG_ARCH_SHMOBILE_MULTI").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is a bit large, but it really helps Skylake bugs we are seeing
on a number of laptops.
Most of the commits are quite similar, ensuring the display power
doesn't vanish under us during hardware access. Also do note that it's
not just Skylake that's affected.
* tag 'drm-intel-fixes-2016-02-22' of git://anongit.freedesktop.org/drm-intel:
drm/i915/gen9: Verify and enforce dc6 state writes
drm/i915/gen9: Check for DC state mismatch
drm/i915/skl: Ensure HW is powered during DDB HW state readout
drm/i915/lvds: Ensure the HW is powered during HW state readout
drm/i915/hdmi: Ensure the HW is powered during HW state readout
drm/i915/dsi: Ensure the HW is powered during HW state readout
drm/i915/dp: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered when accessing the CRC HW block
drm/i915/ddi: Ensure the HW is powered during HW state readout
drm/i915/crt: Ensure the HW is powered during HW state readout
drm/i915: Ensure the HW is powered during HW access in assert_pipe
drm/i915: Ensure the HW is powered when disabling VGA
drm/i915/ibx: Ensure the HW is powered during PLL HW readout
drm/i915: Ensure the HW is powered during display pipe HW readout
drm/i915: Add helper to get a display power ref if it was already enabled
A few radeon and amdgpu fixes for 4.5. A few further fixes for the vblank
regressions in 4.4 and a couple of other minor fixes.
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: disable direct VM updates when vm_debug is set
amdgpu: fix NULL pointer dereference at tonga_check_states_equal
drm/radeon/pm: adjust display configuration after powerstate
drm/amdgpu/pm: adjust display configuration after powerstate
drm/amdgpu/pm: add some checks for PX
drm/amdgpu: fix locking in force performance level
drm/amdgpu/gfx8: fix priv reg interrupt enable
drm/amdgpu: Don't hang in amdgpu_flip_work_func on disabled crtc.
drm/radeon: Don't hang in radeon_flip_work_func on disabled crtc. (v2)
- Fix for csd deadlock due to missing self IPI
- Accompanying IPI cleanups / optimization
- Brown paper bag bug in one of the cleanups above
- Boot reporting updates for new hardware features
- Don't force DEVTMPFS if INITRAMFS
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=awhE
-----END PGP SIGNATURE-----
Merge tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fix for csd deadlock due to missing self IPI
- Accompanying IPI cleanups / optimization
- Brown paper bag bug in one of the cleanups above
- Boot reporting updates for new hardware features
- Don't force DEVTMPFS if INITRAMFS
* tag 'arc-4.5-rc6-fixes-upd' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: SMP: CONFIG_ARC_IPI_DBG cleanup
ARC: SMP: No need for CONFIG_ARC_IPI_DBG
ARCv2: Elide sending new cross core intr if receiver didn't ack prev
ARCv2: SMP: Push IPI_IRQ into IPI provider
ARC: [intc-compact] Remove IPI setup from ARCompact port
ARCv2: SMP: Emulate IPI to self using software triggered interrupt
arc: get rid of DEVTMPFS dependency on INITRAMFS_SOURCE
ARCv2: boot report CCMs (Closely Coupled Memories)
ARCv2: boot print Low Latency Memory
ARC: Assume multiplier is always present
Pull vfs fixes from Al Viro:
"Assorted fixes - xattr one from this cycle, the rest - stable fodder"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/pnode.c: treat zero mnt_group_id-s as unequal
affs_do_readpage_ofs(): just use kmap_atomic() around memcpy()
xattr handlers: plug a lock leak in simple_xattr_list
fs: allow no_seek_end_llseek to actually seek
Commit d15f9d694b ("libceph: check data_len in ->alloc_msg()")
mistakenly bumped the log level on the "tid %llu unknown, skipping"
message. Turn it back into a dout() - stray replies are perfectly
normal when OSDs flap, crash, get killed for testing purposes, etc.
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
ceph_msg_footer is 21 bytes long, while ceph_msg_footer_old is only 13.
Don't skip too much when CEPH_FEATURE_MSG_AUTH isn't negotiated.
Cc: stable@vger.kernel.org # 3.19+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The contract between try_read() and try_write() is that when called
each processes as much data as possible. When instructed by osd_client
to skip a message, try_read() is violating this contract by returning
after receiving and discarding a single message instead of checking for
more. try_write() then gets a chance to write out more requests,
generating more replies/skips for try_read() to handle, forcing the
messenger into a starvation loop.
Cc: stable@vger.kernel.org # 3.10+
Reported-by: Varada Kari <Varada.Kari@sandisk.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Varada Kari <Varada.Kari@sandisk.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Sebastian Ott and Gerald Schaefer reported random crashes on s390.
It was bisected to my THP refcounting patchset.
The problem is that pmdp_invalidated() called with wrong virtual
address. It got offset up by HPAGE_PMD_SIZE by loop over ptes.
The solution is to introduce new variable to be used in loop and don't
touch 'haddr'.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-and-tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reported-and-tested-by Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
That should make user space bugs more obvious.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
The event_data passed from pem_fini was not cleared upon initialization.
This caused NULL checks to pass and cast_const_phw_tonga_power_state to
attempt to dereference an invalid pointer. Clear the event_data in
pem_init and pem_fini before calling pem_handle_event.
Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Bradley Pankow <btpankow@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GICv3 architecture spec says:
Writing to the active priority registers in any order other than
the following order will result in UNPREDICTABLE behavior:
- ICH_AP0R<n>_EL2.
- ICH_AP1R<n>_EL2.
So let's not pointlessly go against the rule...
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.
Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.
Commit 9b63776fa3 "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.
One documented way to enable all events is to:
cat available_events > set_event
But because the function event is displayed in the available_events, this
now causes an INVALID error:
cat: write error: Invalid argument
Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776fa3 "tracing: Do not enable function event with enable"
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit e8dd2d2d64 ("Silence compiler warning in arch/x86/kvm/emulate.c",
2015-09-06) broke boot of the Hurd. The bug is that the "default:"
case actually could modify "la", but after the patch this change is
not reflected in *linear.
The bug is visible whenever a non-zero segment base causes the linear
address to wrap around the 4GB mark.
Fixes: e8dd2d2d64
Cc: stable@vger.kernel.org
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert commit b5bd026954 (ACPI, PCI, irq: remove interrupt count
restriction) that introduced a boot regression on some systems
where it caused kmalloc() to be used too early.
Link: http://marc.info/?l=linux-acpi&m=145580159209240&w=2
Reported-by: Nalla, Ravikanth <ravikanth.nalla@hpe.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Revert commit 0971686954 "ACPI / PCI: Simplify acpi_penalize_isa_irq()"
that depends on commit b5bd026954 (ACPI, PCI, irq: remove interrupt
count restriction) which introduced a regression and needs to be
reverted for this reason.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On an MMIO access, we always copy the on-stack buffer info
the shared "run" structure, even if this is a read access.
This ends up leaking up to 8 bytes of uninitialized memory
into userspace, depending on the size of the access.
An obvious fix for this one is to only perform the copy if
this is an actual write.
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Ross Zwisler