Commit Graph

57 Commits

Author SHA1 Message Date
Anton Vorontsov e4c690e061 fb: add support for foreign endianness
Add support for the framebuffers with non-native endianness.  This is done via
FBINFO_FOREIGN_ENDIAN flag that will be used by the drivers.  Depending on the
host endianness this flag will be overwritten by FBINFO_BE_MATH internal flag,
or cleared.

Tested to work on MPC8360E-RDK (BE) + Fujitsu MINT framebuffer (LE).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <Valdis.Kletnieks@vt.edu>
Cc: Clemens Koller <clemens.koller@anagramm.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:35 -07:00
Geert Uytterhoeven 9a054fbac8 fb: move and rename extern declaration for global_mode_option
Move the extern declaration for global_mode_option to <linux/fb.h> and rename
the variable to fb_mode_option.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:22 -07:00
Krzysztof Halasa 394d3af7ba Intel FB: more interlaced mode support
Intel FB: allow odd- and even-field-first in interlaced modes, and
proper sync to vertical retrace

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:20 -07:00
Pavel Pisa 779121e9f1 fbdev: Support for byte-reversed framebuffer formats
Allow generic frame-buffer code to correctly write texts and blit images for
1, 2 and 4 bit per pixel frame-buffer organizations when pixels in bytes are
organized to in opposite order than bytes in long type.

Overhead should be reasonable.  If option is not selected, than compiler
should eliminate completely all overhead.

The feature is disabled at compile time if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is
not set.

[adaplas]
Convert helper functions to macros if feature is not enabled.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:19 -07:00
Imre Deak fe0e3a9df6 OMAP: add TI OMAP1610 accelerator entry.
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:13 -07:00
Jesse Barnes cfafca8067 fbdev: fbcon: console unregistration from unregister_framebuffer
This allows for proper console unregistration via the VT layer, and updates
the FB layer to use it.  This makes debugging new console drivers much easier,
since you can properly clean them up before unloading.

[adaplas]
unregister_framebuffer() is typically called as part of the driver's
module_exit(). Doing so otherwise will freeze the machine as the VT layer is
holding reference counts on fbcon, and fbcon on the driver.  With this change,
it allows unregister_framebuffer() to be called safely anywhere as needed.

Additions from the original:  If multiple drivers are used by fbcon, and if
one of them unregisters, a driver will take over the consoles vacated by the
outgoing one (via set_con2fb_map).   Once only the outgoing driver remains,
then fbcon will unbind from the VT layer (if CONFIG_HW_CONSOLE_UNBINDING is
set to y).

It is important that these drivers implement fb_open() and fb_release()
just to ensure that no other process is using the driver. Likewise, these
drivers _must_ check the return value of unregister_framebuffer().

[akpm@linux-foundation.org: make fbcon_unbind() stub inline]
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:11 -07:00
Geert Uytterhoeven 9db71a188b fbdev: Move declaration of fb_class to <linux/fb.h>
Move the forward declaration of fb_class from drivers/video/console/fbcon.h to
<linux/fb.h>, together with the other forward declarations related to
drivers/video/fbmem.c.

This kills the following sparse warning:
| drivers/video/fbmem.c:1363:14: warning: symbol 'fb_class' was not declared. Should it be static?

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-01 08:18:28 -07:00
Haavard Skinnemoen 880169dd2e fbdev: add support for AVR32
Provide framebuffer page protection flags and definitions of
fb_readl/fb_writel for AVR32.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 12:30:57 -07:00
Antonino A. Daplas 38a3dc5185 fbdev: fbcon: check if mode can handle new screen
Check if the mode can properly display the screen.  This will be needed by
drivers where the capability is not constant with each mode.  The function
fb_set_var() will query fbcon the requirement, then it will query the driver
(via a new hook fb_get_caps()) its capability.  If the driver's capability
cannot handle fbcon's requirement, then fb_set_var() will fail.

For example, if a particular driver supports 2 modes where:

mode1 = can only display 8x16 bitmaps
mode2 = can display any bitmap

then if current mode = mode2 and current font = 12x22

fbset <mode1> /* mode1 cannot handle 12x22 */
fbset will fail

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:32 -07:00
Antonino A. Daplas 11f11d522f fbdev: add tile operation to get the maximum length of the map
Add a tile method, fb_get_tilemax(), that returns the maximum length of
the tile map (or font map).  This is needed by s3fb which can only handle
256 characters.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:31 -07:00
Antonino A. Daplas bf26ad72a6 fbdev: advertise limitation of drawing engine
A few drivers are not capable of blitting rectangles of any dimension.
vga16fb can only blit 8-pixel wide rectangles, while s3fb (in tileblitting
mode) can only blit 8x16 rectangles.  For example, loading a 12x22 font in
vga16fb will result in a corrupt display.

Advertise this limitation/capability in info->pixmap.blit_x and blit_y.  These
fields are 32-bit arrays (font max is 32x32 only), ie, if bit 7 is set, then
width/height of 7+1 is supported.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:30 -07:00
Antonino A. Daplas 09aaf268eb fbdev: add fb_read/fb_write functions for framebuffers in system RAM
The functions fb_read() and fb_write in fbmem.c assume that the framebuffer
is in IO memory.  However, we have 3 drivers (hecubafb, arcfb, and vfb)
where the framebuffer is allocated from system RAM (via vmalloc). Using
__raw_read/__raw_write (fb_readl/fb_writel) for these drivers is
illegal, especially in other platforms.

Create file read and write methods for these types of drivers.  These are
named fb_sys_read() and fb_sys_write().

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:30 -07:00
Antonino A. Daplas 3f9b0880e4 fbdev: pass struct fb_info to fb_read and fb_write
It is unnecessary to pass struct file to fb_read() and fb_write() in struct
fb_ops. For consistency with the other methods, pass struct fb_info instead.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:30 -07:00
Antonino A. Daplas 68648ed1f5 fbdev: add drawing functions for framebuffers in system RAM
The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume
that the framebuffer is in IO memory.  However, we have 3 drivers (hecubafb,
arcfb, and vfb) where the framebuffer is allocated from system RAM (via
vmalloc). Using _raw_read/write and family for these drivers (as used in
the cfb* functions) is illegal, especially in other platforms.

Create 3 new drawing functions, based almost entirely from the original
except that the framebuffer memory is assumed to be in system RAM.
These are named as sysimgblt, syscopyarea, and sysfillrect.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:30 -07:00
Paul Mundt 5e841b88d2 fb: fsync() method for deferred I/O flush.
There are cases when we do not want to wait on the delay for automatically
updating the "real" framebuffer, this implements a simple ->fsync() hook
for explicitly flushing the deferred I/O work.  The ->page_mkwrite()
handler will rearm the work queue normally.

(akpm: nuke unneeded ifdefs, forward-delcare struct dentry)

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Acked-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:27 -07:00
Jaya Kumar 60b59beafb fbdev: mm: Deferred IO support
This implements deferred IO support in fbdev.  Deferred IO is a way to delay
and repurpose IO.  This implementation is done using mm's page_mkwrite and
page_mkclean hooks in order to detect, delay and then rewrite IO.  This
functionality is used by hecubafb.

[adaplas]
This is useful for graphics hardware with no directly addressable/mappable
framebuffer. Implementing this will allow the "framebuffer" to be accesible
from user space via mmap().

Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:26 -07:00
Richard Purdie 37ce69a57f backlight: Rework backlight/fb interaction simplifying, lots
fb_info->bl_mutex is badly thought out and the backlight class doesn't
need it if the framebuffer/backlight register/unregister order is
consistent, particularly after the backlight locking fixes.

Fix the drivers to use the order:

backlight_device_register()
register_framebuffer()
unregister_framebuffer()
backlight_device_unregister()

and turn bl_mutex into a lock for the bl_curve data only.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20 08:38:46 +00:00
Richard Purdie 994efacdf9 backlight/fbcon: Add FB_EVENT_CONBLANK
The backlight class wants notification whenever the console is blanked
but doesn't get this when hardware blanking fails and software blanking
is used. Changing FB_EVENT_BLANK to report both would be a behaviour
change which could confuse the console layer so add a new event for
software blanking and have the backlight class listen for both.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-02-20 08:38:45 +00:00
Geert Uytterhoeven 9791d763de [PATCH] fbdev modedb: make more pointer parameters const
fbdev modedb: make more input and output pointer parameters const

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: James Simmons <jsimmons@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:44 -08:00
Ondrej Zajicek a268422de8 [PATCH] fbdev driver for S3 Trio/Virge
Add a driver for S3 Trio / S3 Virge.  Driver is tested with most versions
of S3 Trio and with S3 Virge/DX, on i386.

(akpm: We kind-of have support for this hardware already, but...

virgefb.c
  - amiga/zorro specific,
  - broken (according to Kconfig),
  - uses obsolete/nonexistent interface (struct display_switch)
  - recent Adrian Bunk's patch removes this driver

S3triofb.c
  - ppc/openfirmware specific
  - minimal functionality
  - broken (according to Kconfig),
  - uses obsolete/nonexistent interface (struct display_switch)
)

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:41 -08:00
Geert Uytterhoeven 3161986224 [PATCH] fbdev: remove references to non-existent fbmon_valid_timings()
Remove references to non-existent fbmon_valid_timings()

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:55 -08:00
Helge Deller adf6b20654 [PATCH] fbcmap.c: mark structs const or __read_mostly
- Mark the default colormaps read-only, as nobody should be allowed to
  modify them

- Additionally mark color values as __read_mostly since they will only be
  modified (very seldom) by fb_invert_cmaps()

- Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE()
  macro

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:29:05 -08:00
Greg Kroah-Hartman 78cde08879 Driver core: convert fb code to use struct device
Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:52:00 -08:00
Antonino A. Daplas 1a6600be3e [PATCH] fbdev: Honor the return value of device_create_file
Check the return value of device_create_file().  If return is 'fail', remove
attributes by calling device_remove_file().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:10 -07:00
Dennis Munsie fc5891c8a3 [PATCH] fbdev: Add generic ddc read functionality
Adds functionality to read the EDID information over the DDC bus in a generic
way.  This code is based on the DDC implementation in the radeon driver.

[adaplas]
- separate from fbmon.c and place in new file fb_ddc.c
- remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature
  will not compile if i2c support is compiled as a module
- feature is selectable only by drivers needing it. It must have a
  'select FB_DDC if xxx' in Kconfig
- change printk's to dev_*, the i2c people prefers it

Signed-off-by: Dennis Munsie <dmunsie@cecropia.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:09 -07:00
Michal Januszewski 2b25742556 [PATCH] fbdev: include backlight.h only when __KERNEL__ is defined
linux/backlight.h pulls in header files (eg.  ioport.h) that break
compilation of userspace programs.  To solve the problem, only include
backlight.h in fb.h if compiling kernel stuff.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14 12:54:29 -07:00
Antonino A. Daplas 256154fbc3 [PATCH] fbdev: statically link the framebuffer notification functions
The backlight and lcd subsystems can be notified by the framebuffer layer
of blanking events.  However, these subsystems, as a whole, can function
independently from the framebuffer layer.  But in order to enable to the
lcd and backlight subsystems, the framebuffer has to be compiled also,
effectively sucking in a huge amount of unneeded code.

To prevent dependency problems, separate out the framebuffer notification
mechanism from the framebuffer layer and permanently link it to the kernel.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31 13:28:44 -07:00
Jon Smirl a8f340e394 [PATCH] vt: Remove VT-specific declarations and definitions from tty.h
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a
function of the VT layer than the TTY one.  Moving these to vt.h and vt_kern.h
allows all of the framebuffer and VT console drivers to remove their
dependency on tty.h.

[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl <jonsmir@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
Adrian Bunk b3c2ffd534 typo fixes: mecanism -> mechanism
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 18:20:44 +02:00
Greg Kroah-Hartman ff23eca3e8 [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
Also fixes up all files that #include it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Antonino A. Daplas e614b18dce [PATCH] VT binding: Update fbcon to support binding
The control for binding/unbinding is moved from fbcon to the console layer.
Thus the fbcon sysfs attributes, attach and detach, are also gone.

    1. Add a notifier event that tells fbcon if a framebuffer driver has been
       unregistered.  If no registered driver remains, fbcon will unregister
       itself from the console layer.

    2. Replaced calls to give_up_console() with unregister_con_driver().

    3. Still use take_over_console() instead of register_con_driver() to
       maintain compatibility

    4. Respect the parameter first_fb_vc and last_fb_vc instead of using 0 and
       MAX_NR_CONSOLES - 1. These parameters are settable by the user.

    5. When fbcon is completely unbound from the console layer, fbcon will
       also release (iow, decrement module reference counts to zero) all fbdev
       drivers. In other words, a bind or unbind request from the console layer
       will propagate down to the framebuffer drivers.

    6. If fbcon is not bound to the console, it will ignore all notifier
       events (except driver registration and unregistration) and all sysfs
       requests.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:33 -07:00
Antonino A. Daplas 9a17917671 [PATCH] Detaching fbcon: sdd sysfs class device entry for fbcon
In order for this feature to work, an interface will be needed.  The most
appropriate is sysfs.  However, the framebuffer console has no sysfs entry
yet.  This will create a sysfs class device entry for fbcon under
/sys/class/graphics.

Add a class_device entry 'fbcon' under class 'graphics'.  Console-specific
attributes which where previously under class/graphics/fb[x] are moved to
class/graphics/fbcon.  These attributes, 'con_rotate' and 'con_rotate_all',
are also renamed to 'rotate' and 'rotate_all' respectively.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:32 -07:00
Michael Hanselmann 5474c120aa [PATCH] Rewritten backlight infrastructure for portable Apple computers
This patch contains a total rewrite of the backlight infrastructure for
portable Apple computers.  Backward compatibility is retained.  A sysfs
interface allows userland to control the brightness with more steps than
before.  Userland is allowed to upload a brightness curve for different
monitors, similar to Mac OS X.

[akpm@osdl.org: add needed exports]
Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:59 -07:00
Antonino A. Daplas a536093a2f [PATCH] fbcon: Fix big-endian bogosity in slow_imageblit()
The monochrome->color expansion routine that handles bitmaps which have
(widths % 8) != 0 (slow_imageblit) produces corrupt characters in big-endian.
This is caused by a bogus bit test in slow_imageblit().

Fix.

This patch may deserve to go to the stable tree.  The code has already been
well tested in little-endian machines.  It's only in big-endian where there is
uncertainty and Herbert confirmed that this is the correct way to go.

It should not introduce regressions.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Acked-by: Herbert Poetzl <herbert@13thfloor.at>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:19:00 -08:00
Alexey Dobriyan 7f927fcc2f [PATCH] Typo fixes
Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:08 -08:00
Christoph Hellwig 216d526c89 [PATCH] fbdev: Sanitize ->fb_mmap prototype
No need for a file argument.  If we'd really need it it's in vma->vm_file
already.  gbefb and sgivwfb used to set vma->vm_file to the file argument, but
the kernel alrady did that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:15 -08:00
Christoph Hellwig 67a6680d64 [PATCH] fbdev: Sanitize ->fb_ioctl prototype
The ioctl and file arguments to ->fb_mmap are totally unused and there's not
reason a driver should need them.

Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:14 -08:00
Antonino A. Daplas be0d9b6c7a [PATCH] fbdev: Fix incorrect unaligned access in little-endian machines
The drawing function cfbfillrect does not work correctly when access is not
unsigned-long aligned.  It manifests as extra lines of pixels that are not
complete drawn.  Reversing the shift operator solves the problem, so I would
presume that this bug would manifest only on little endian machines.  The
function cfbcopyarea may also have this bug.

Aligned access should present no problems.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Knut Petersen 39942fd8ff [PATCH] fbdev: fix switch to KD_TEXT, enhanced version
Every framebuffer driver relies on the assumption that the set_par()
function of the driver is called before drawing functions and other
functions dependent on the hardware state are executed.

Whenever you switch from X to a framebuffer console for the very first
time, there is a chance that a broken X system has _not_ set the mode to
KD_GRAPHICS, thus the vt and framebuffer code executes a screen redraw and
several other functions before a set_par() is executed.  This is believed
to be not a bug of linux but a bug of X/xdm.  At least some X releases used
by SuSE and Debian show this behaviour.

There was a 2nd case, but that has been fixed by Antonino Daplas on
10-dec-2005.

This patch allows drivers to set a flag to inform fbcon_switch() that they
prefer a set_par() call on every console switch, working around the
problems caused by the broken X releases.

The flag will be used by the next release of cyblafb and might help other
drivers that assume a hardware state different to the one used by X.

As the default behaviour does not change, this patch should be acceptable
to everybody.

Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Antonino A. Daplas 4743484718 [PATCH] fbcon: Add ability to save/restore graphics state
Add hooks to save and restore the graphics state.  These hooks are called in
fbcon_blank() when entering/leaving KD_GRAPHICS mode.  This is needed by
savagefb at least so it can cooperate with savage_dri and by cyblafb.

State save/restoration can be full or partial.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 22:31:17 -08:00
Antonino A. Daplas a812c94b94 [PATCH] fbcon: Console Rotation - Add ability to control rotation via sysfs
Add ability to set rotation via sysfs.  The attributes are located in
/sys/class/graphics/fb[n] and accepts 0 - unrotated; 1 - clockwise; 2 - upside
down; 3 - counterclockwise.

The attributes are:

con_rotate (r/w) -   set rotation of the active console
con_rotate_all (w) - set rotation of all consoles
rotate (r/w) -       set rotation of the framebuffer, if supported.
Currently, none of the drivers support this.

This is probably temporary, since con_rotate and con_rotate_all are
console-specific and has no business being under the fb device.  However,
until the console layer acquires it's own sysfs class, these attributes will
temporarily reside here.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:35 -08:00
Antonino A. Daplas 9c44e5f6c2 [PATCH] fbcon: Console Rotation - Add support to rotate the logo
Add support for rotating and positioning of the logo.  Rotation and position
depends on 'int rotate' parameter added to fb_prepare_logo() and
fb_show_logo().

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas e4fc27618b [PATCH] fbcon: Console Rotation - Prepare fbcon for console rotation
This patch series implements generic code to rotate the console at 90, 180,
and 270 degrees. The implementation is completely done in the framebuffer
console level, thus no changes to the framebuffer layer or to the drivers
are needed.

Console rotation is required by some Sharp-based devices where the natural
orientation of the display is not at 0 degrees. Also, users that have
displays that can pivot will benefit by having a console in portrait mode
if they so desire.

The choice to implement the code in the console layer rather than in the
framebuffer layer is due to the following reasons:

- it's fast
- it does not require driver changes
- it can coexist with devices that can rotate the display at the hardware level
- it complements graphics applications that can do display rotation

The changes to core fbcon are minimal-- recognition of the console
rotation angle so it can swap directions, origins and axes (xres vs yres,
xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation
angle per display. The bulk of the code that does the actual drawing to the
screen are placed in separate files. Each angle of rotation has separate
methods (bmove, clear, putcs, cursor, update_start which is derived from
update_var, and clear_margins).  To mimimize processing time, the fontdata
are pre-rotated at each console switch (only if the font or the angle has
changed).

The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if
rotation is not needed.

Choosing the rotation angle can be done in several ways:

1. boot option fbcon=rotate:n, where
     n = 0 - normal
     n = 1 - 90 degrees (clockwise)
     n = 2 - 180 degrees (upside down)
     n = 3 - 270 degrees (counterclockwise)

2. echo n > /sys/class/graphics/fb[num]/con_rotate

     where n is the same as described above. It sets the angle of rotation
of the current console

3 echo n > /sys/class/graphics/fb[num]/con_rotate_all

     where n is the same as described above. Globally sets the angle of
rotation.

GOTCHAS:

	The option, especially at angles of 90 and 270 degrees, will exercise
the least used code of drivers.  Namely, at these angles, panning is done
in the x-axis, so it can reveal bugs in the driver if xpanstep is set
incorrectly. A workaround is to set xpanstep = 0.

	Secondly, at these angles, the framebuffer memory access can be
unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers
imageblit, fillrect and copyarea functions.  (I think cfbfillrect may have
this buglet). A workaround is to use a standard 8x16 font.

Speed:

	The scrolling speed difference between 0 and 180 degrees is minimal,
somewhere areound 1-2%.  At 90 or 270 degress, speed drops down to a vicinity
of 30-40%. This is understandable because the blit direction is across the
framebuffer "direction." Scrolling will be helped at these angles if xpanstep
is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2.

Note: The code is tested on little-endian only, so I don't know if it will
work in big-endian. Please let me know, it will take only less than a minute
of your time.

This patch prepares fbcon for console rotation and contains the following
changes:

- add rotate field in struct fbcon_ops to keep fbcon's current rotation
  angle

- add con_rotate field in struct display to store per-display rotation angle

- create a private copy of the current var to fbcon.  This will prevent
  fbcon from directly manipulating info->var, especially the fields xoffset,
  yoffset and vmode.

- add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc)
  depending on the rotation angle

- change global update_var() (function that sets the screen start address)
  as an fbcon method update_start.  This is required because the axes, start
  offset, and/or direction can be reversed depending on the rotation angle.

- add fbcon method rotate_font() which will rotate each character bitmap to
  the correct angle of rotation.

- add fbcon boot option 'rotate' to select the angle of rotation at bootime.
   Currently does nothing until all patches are applied.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:56:34 -08:00
Antonino A. Daplas 003cfc0c56 [PATCH] fbdev: Add helper to get an appropriate initial mode
Add new helper, fb_find_best_display(), which will search the modelist for the
best mode for the attached display.  This requires an EDID block that is
converted to struct fb_monspecs and a private modelist.  The search will be
done in this manner:

- if 1st detailed timing is preferred, use that
- else if dimensions of the display are known, use that to estimate xres and
- else if modelist has detailed timings, use the first detailed timing
- else, use the very first entry from the modelist

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:53 -08:00
Michal Januszewski 8fb6567e34 [PATCH] fbdev: fix the fb_find_nearest_mode() function
Currently the fb_find_nearest_mode() function finds a mode with screen
resolution closest to that described by the 'var' argument and with some
arbitrary refresh rate (eg.  in the following sequence of refresh rates: 70 60
53 85 75, 53 is selected).

This patch fixes the function so that it looks for the closest mode as far as
both resolution and refresh rate are concerned.  The function's first argument
is changed to fb_videomode so that the refresh rate can be specified by the
caller, as fb_var_screeninfo doesn't have any fields that could directly hold
this data.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:52 -08:00
Antonino A. Daplas c465e05a03 [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbcon
According to Jon Smirl, filling in the field fb_cursor with soft_cursor for
drivers that do not support hardware cursors is redundant.  The soft_cursor
function is usable by all drivers because it is just a wrapper around
fb_imageblit.  And because soft_cursor is an fbcon-specific hook, the file is
moved to the console directory.

Thus, drivers that do not support hardware cursors can leave the fb_cursor
field blank.  For drivers that do, they can fill up this field with their own
version.

The end result is a smaller code size.  And if the framebuffer console is not
loaded, module/kernel size is also reduced because the soft_cursor module will
also not be loaded.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:50 -08:00
Jan Beulich 2f4516dbd0 [PATCH] fbcon: constify font data
const-ify the font control structures and data, to make somewhat better
guarantees that these are not modified anywhere in the kernel.
Specifically for a kernel debugger to share this information from the
normal kernel code, such a guarantee seems rather desirable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:22:32 -07:00
Antonino A. Daplas 829e79b680 [PATCH] fbcon: Break up bit_putcs into its component functions
The function bit_putcs() in drivers/video/console/bitblit.c is becoming large.
 Break it up into its component functions (bit_putcs_unaligned and
bit_putcs_aligned).

Incorporated fb_pad_aligned_buffer() optimization by Roman Zippel.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:41 -07:00
Antonino A. Daplas 96fe6a2109 [PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) support
The Coordinated Video Timings (CVT) is the latest standard approved by VESA
concerning video timings generation.  It addresses the limitation of GTF which
is designed mainly for CRT displays.  CRT's have a high blanking requirement
(as much as 25% of the horizontal frame length) which artificially increases
the pixelclock.  Digital displays, on the other hand, needs to conserve the
pixelclock as much as possible.  The GTF also does not take into account the
different aspect ratios in its calculation.

The new function added is fb_find_mode_cvt().  It is called by fb_find_mode()
if it recognizes a mode option string formatted for CVT.  The format is:

<xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m]

The 'M' tells the function to calculate using CVT.  On it's own, it will
compute a timing for CRT displays at 60Hz.  If the 'R' is specified, 'reduced
blanking' computation will be used, best for flatpanels.  The 'i' and the 'm'
is for 'interlaced mode' and 'with margins' respectively.

To determine if CVT was used, check for dmesg for something like this:

CVT Mode - <pix>M<n>[-R], ie: .480M3-R  (800x600 reduced blanking)

where: pix - product of xres and yres, in MB
    M   - is a CVT mode
    n   - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10)
    -R   - reduced blanking

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 14:03:39 -07:00
Thomas Winischhofer 544393fe58 [PATCH] sisfb update
This lifts sisfb from version 1.7.17 to version 1.8.9. Changes include:

- Added support for XGI V3XT, V5, V8, Z7 chipsets, including POSTing of
  all of these chipsets.

- Added support for latest SiS chipsets (761).

- Added support for SiS76x memory "hybrid" mode.

- Added support for new LCD resolutions (eg 1280x854, 856x480).

- Fixed support for 320x240 STN panels (for embedded devices).

- Fixed many HDTV modes (525p, 750p, 1080i).

- Fixed PCI config register reading/writing to use proper kernel
  functions for this purpose.

- Fixed PCI ROM handling to use the kernel's proper functions.

- Removed lots of "typedef"s.

- Removed lots of code which was for X.org/XFree86 only.

- Fixed coding style in many places.

- Removed lots of 2.4 cruft.

- Reduced stack size by unifying two previously separate structs into
  one.

- Added new hooks for memory allocation (for DRM).  Now the driver can
  truly handle multiple cards, including memory management.

- Fixed numerous minor bugs.

Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 13:58:01 -07:00