Commit Graph

80 Commits

Author SHA1 Message Date
David Howells d8076bdb56 uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]
Wire up the mount API syscalls on non-x86 arches.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-16 12:23:45 -04:00
Arnd Bergmann 39036cd272 arch: add pidfd and io_uring syscalls everywhere
Add the io_uring and pidfd_send_signal system calls to all architectures.

These system calls are designed to handle both native and compat tasks,
so all entries are the same across architectures, only arm-compat and
the generic tale still use an old format.

Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> (s390)
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-04-15 16:31:17 +02:00
Arnd Bergmann 48166e6ea4 y2038: add 64-bit time_t syscalls to all 32-bit architectures
This adds 21 new system calls on each ABI that has 32-bit time_t
today. All of these have the exact same semantics as their existing
counterparts, and the new ones all have macro names that end in 'time64'
for clarification.

This gets us to the point of being able to safely use a C library
that has 64-bit time_t in user space. There are still a couple of
loose ends to tie up in various areas of the code, but this is the
big one, and should be entirely uncontroversial at this point.

In particular, there are four system calls (getitimer, setitimer,
waitid, and getrusage) that don't have a 64-bit counterpart yet,
but these can all be safely implemented in the C library by wrapping
around the existing system calls because the 32-bit time_t they
pass only counts elapsed time, not time since the epoch. They
will be dealt with later.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-02-07 00:13:28 +01:00
Arnd Bergmann d33c577ccc y2038: rename old time and utime syscalls
The time, stime, utime, utimes, and futimesat system calls are only
used on older architectures, and we do not provide y2038 safe variants
of them, as they are replaced by clock_gettime64, clock_settime64,
and utimensat_time64.

However, for consistency it seems better to have the 32-bit architectures
that still use them call the "time32" entry points (leaving the
traditional handlers for the 64-bit architectures), like we do for system
calls that now require two versions.

Note: We used to always define __ARCH_WANT_SYS_TIME and
__ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and
__ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is
reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while
we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat
mode. The resulting asm/unistd.h changes look a bit counterintuitive.

This is only a cleanup patch and it should not change any behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-02-07 00:13:28 +01:00
Arnd Bergmann 00bf25d693 y2038: use time32 syscall names on 32-bit
This is the big flip, where all 32-bit architectures set COMPAT_32BIT_TIME
and use the _time32 system calls from the former compat layer instead
of the system calls that take __kernel_timespec and similar arguments.

The temporary redirects for __kernel_timespec, __kernel_itimerspec
and __kernel_timex can get removed with this.

It would be easy to split this commit by architecture, but with the new
generated system call tables, it's easy enough to do it all at once,
which makes it a little easier to check that the changes are the same
in each table.

Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-07 00:13:28 +01:00
Arnd Bergmann 275f22148e ipc: rename old-style shmctl/semctl/msgctl syscalls
The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.

For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.

The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.

As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.

A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25 17:22:50 +01:00
Arnd Bergmann 4ab65ba7a5 ARM: add kexec_file_load system call number
A couple of architectures including arm64 already implement the
kexec_file_load system call, on many others we have assigned a system
call number for it, but not implemented it yet.

Adding the number in arch/arm/ lets us use the system call on arm64
systems in compat mode, and also reduces the number of differences
between architectures. If we want to implement kexec_file_load on ARM
in the future, the number assignment means that kexec tools can already
be built with the now current set of kernel headers.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-25 17:22:50 +01:00
Arnd Bergmann 78594b9599 ARM: add migrate_pages() system call
The migrate_pages system call has an assigned number on all architectures
except ARM. When it got added initially in commit d80ade7b32 ("ARM:
Fix warning: #warning syscall migrate_pages not implemented"), it was
intentionally left out based on the observation that there are no 32-bit
ARM NUMA systems.

However, there are now arm64 NUMA machines that can in theory run 32-bit
kernels (actually enabling NUMA there would require additional work)
as well as 32-bit user space on 64-bit kernels, so that argument is no
longer very strong.

Assigning the number lets us use the system call on 64-bit kernels as well
as providing a more consistent set of syscalls across architectures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2019-01-25 17:22:43 +01:00
Masahiro Yamada 172caf1993 kbuild: remove redundant target cleaning on failure
Since commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special
target"), the target file is automatically deleted on failure.

The boilerplate code

  ... || { rm -f $@; false; }

is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06 09:46:51 +09:00
Stefan Agner 73aeb2cbcd ARM: 8787/1: wire up io_pgetevents syscall
Wire up the new io_pgetevents syscall for ARM.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-09-19 10:44:11 +01:00
Mathieu Desnoyers 338035edc9 arm: Wire up restartable sequences system call
Wire up the rseq system call on 32-bit ARM.

This provides an ABI improving the speed of a user-space getcpu
operation on ARM by skipping the getcpu system call on the fast path, as
well as improving the speed of user-space operations on per-cpu data
compared to using load-linked/store-conditional.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Chris Lameter <cl@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Hunter <ahh@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: linux-api@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180602124408.8430-6-mathieu.desnoyers@efficios.com
2018-06-06 11:58:31 +02:00
Lukasz Majewski c8cee3596d ARM: ep93xx: ts72xx: Add support for BK3 board - ts72xx derivative
The BK3 board is a derivative of the ts72xx reference design.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
2017-12-13 22:26:10 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Russell King a1016e94cc ARM: wire up statx syscall
Wire up the new statx syscall for ARM.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2017-03-10 10:15:15 +00:00
Russell King ed141f2890 Merge branch 'syscalls' into for-linus
Conflicts:
	arch/arm/include/asm/unistd.h
	arch/arm/include/uapi/asm/unistd.h
	arch/arm/kernel/calls.S
2016-12-14 11:14:00 +00:00
Russell King ffa5d3eec7 ARM: Update mach-types
It's been a while since the mach-types file was updated, as we have
moved away to DT for platform stuff.  Updating it has the advantage of
retiring lots of entries which have not been made use of, resulting in
rougly halving the size of the file.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-30 20:21:20 +00:00
Russell King 219622b7b3 ARM: wire up new pkey syscalls
Wire up the new pkey syscalls for ARM.  This illustrates the ease that
the generated/tabular approach gives us: adding new system calls
becomes much easier, and all the dependencies are automatically handled
for the update.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18 21:34:07 +01:00
Russell King 96a8fae0fe ARM: convert to generated system call tables
Convert ARM to use a similar mechanism to x86 to generate the unistd.h
system call numbers and the various kernel system call tables.  This
means that rather than having to edit three places (asm/unistd.h for
the total number of system calls, uapi/asm/unistd.h for the system call
numbers, and arch/arm/kernel/calls.S for the call table) we have only
one place to edit, making the process much more simple.

The scripts have knowledge of the table padding requirements, so there's
no need to worry about __NR_syscalls not fitting within the immediate
constant field of ALU instructions anymore.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18 21:34:06 +01:00
Russell King 4e2648db9c ARM: remove indirection of asm/mach-types.h
Arrange for mach-types.h to be directly generated in the relevant
path, so we don't need a one-liner file in arch/arm/include/asm/.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-18 20:18:08 +01:00
Masahiro Yamada 6e8ac724bf ARM: 8562/1: suppress "include/generated/mach-types.h is up to date."
For incremental build, "include/generated/mach-types.h is up to date"
is every time displayed like follows:

$ make ARCH=arm
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/asm-offsets.h

This commit avoids such a clumsy log and introduces Kbuild standard
log style:

  GEN     include/generated/mach-types.h

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-04-19 19:42:47 +01:00
Magnus Damm 34dc938f4d ARM: shmobile: mackerel: Remove mach-type entry
Remove the mackerel entry from the mach-types file.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-02-24 06:45:16 +09:00
Russell King 848a7b13ae ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-22 17:24:51 +00:00
Fabio Estevam 2d4d07b97c ARM: boot: Fix usage of kecho
Since commit edc88ceb0 (ARM: be really quiet when building with 'make -s') the
following output is generated when building a kernel for ARM:

echo '  Kernel: arch/arm/boot/Image is ready'
  Kernel: arch/arm/boot/Image is ready
  Building modules, stage 2.
echo '  Kernel: arch/arm/boot/zImage is ready'
  Kernel: arch/arm/boot/zImage is ready

As per Documentation/kbuild/makefiles.txt the correct way of using kecho is
'@$(kecho)'.

Make this change so no more unwanted 'echo' messages are displayed.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-12 23:22:54 +01:00
Arnd Bergmann edc88ceb0c ARM: be really quiet when building with 'make -s'
Sometimes we want the kernel build process to only print messages
on errors, e.g. in automated build testing. This uses the "kecho"
macro that the build system provides to hide a few informational
messages. Nothing changes for a regular "make" or "make V=1".

Without this patch, building any ARM kernel results in:

  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
2012-10-09 20:29:05 +02:00
Linus Torvalds ac9e7ab32f ARM: soc: cleanups, part 2
A shorter cleanup branch submitted separately due to dependencies with
 some of the previous topics.
 
 Major thing here is that the Broadcom bcmring platform is removed. It's an
 SoC that's used on some stationary VoIP platforms, and is in desperate
 need of some cleanup. Broadcom came back and suggested that we just
 deprecate the platform for now, since they aren't going to spend the
 resources needed on cleaning it up, and there are no users of the platform
 directly from mainline.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO3MAAoJEIwa5zzehBx39VgQAKKjVG+QLQMaDhcZD8bl8xrZ
 vDbH5b4kOso34q6D4kXtSb3bA9Anzps6ZZ+dLHBRNHXTXH5FNHTcKNxqhEV1b0qP
 3XTZ05/FopixmSKfUvNvx84jM93phGSdXcvz6zcpGgUdNVQ5ElsX5BS3DBSGw12O
 K3zVJlQxEQHgT+iXvoFQv5YOREQOzbqrFSm/QORT78+zcm6nPCY5rCJfz1Po05rS
 hHTU/JfL5rXgLJaPXqbCkRFitM1CSGQXw8GkSP3IxB5mfDH6DqcWon0Uh3AOh+k2
 PXQGNhzHlL6RNesscLDU3YsFhQq1tPL/JA8gzzaTa8z4CCWGTmD48iHUJ0mtXN33
 XmglrpNQwiiD9pepWyfN0TPiAD9mBfnRRzwkmmHUkeNeIeVOo+nH+6JWEBc3kjFD
 CemIIAtbflC0IZpnaoieOUwO6USukq4CCBdR2icQp9hG9nNnZ1O2L/HeuXn8DxPf
 7TksF0wsBAbWkFWRLWmx0dVO0b0fuXsgQ/9+G51OxWOxpMIgMG3BBgkNN6fAybjg
 t10jzilu3UKAVyqetWrrmzkzMtHLz6uAlOkR4W0+YoEBG57HD0iepBJZfzqulkb3
 i5mdwYUQgPViNsvq9cuIfj/+S8QxRbJ4hT59u7YaAPX5Y3jstHXdjS4nFxv/mH0x
 4qzaqYCJxDqdq6CssEKX
 =LPF/
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc cleanups, part 2 from Olof Johansson:
 "A shorter cleanup branch submitted separately due to dependencies with
  some of the previous topics.

  Major thing here is that the Broadcom bcmring platform is removed.
  It's an SoC that's used on some stationary VoIP platforms, and is in
  desperate need of some cleanup.  Broadcom came back and suggested that
  we just deprecate the platform for now, since they aren't going to
  spend the resources needed on cleaning it up, and there are no users
  of the platform directly from mainline."

Fix some conflicts due to BCM2835 getting added next to the removed
BCMRING, and removal of tegra files that had been converted to
devicetree.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion5x: ts78xx: Add IOMEM for virtual addresses.
  ARM: ux500: use __iomem pointers for MMIO
  ARM: Remove mach-bcmring
  ARM: clps711x: Remove board support for CEIVA
  ARM: clps711x: Fix register definitions
  ARM: clps711x: Fix lowlevel debug-macro
  ARM: clps711x: Added simple clock framework
  pinctrl: tegra: move pinconf-tegra.h content into drivers/pinctrl
  ARM: tegra: delete unused headers
  ARM: tegra: remove useless includes of <mach/*.h>
  ARM: tegra: remove dead code
2012-10-01 18:32:45 -07:00
Alexander Shiyan 1c3a918f78 ARM: clps711x: Remove board support for CEIVA
The current kernel does not fit in the CEIVA ROM. Also, some functional
has already been removed due migrate from 2.6 to 3.0, and it seems that
no one uses this platform. So, remove support for this board and modules
specific only to this board.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
2012-09-28 21:14:08 +02:00
Roland Stigge d684f05f2d ARM: mach-pnx4008: Remove architecture
This patch removes the ARM architecture mach-pnx4008. No direct support or user
feedback since 2006. Acknowledgements from NXP/Philips and Linux arm-soc
maintainers.

Signed-off-by: Roland Stigge <stigge@antcom.de>
2012-08-26 16:30:37 +02:00
Russell King d098bc7d58 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-26 08:46:02 +01:00
Russell King a3c2b511a8 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 22:58:10 +00:00
Jon Medhurst (Tixy) d22759ed56 ARM: 7193/1: Fix machine_is_xxx() naming for eSata SheevaPlug and QNAP TS-209
The eSata SheevaPlug and QNAP TS-209 devices were removed from
mach-types due to naming mismatches between machine_is_xxx(), CONFIG_XXX
and MACH_TYPE_XXX.

This patch fixes those mismatches and adds the devices back into
mach-types.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Jon Medhurst <tixy@yxit.co.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-06 11:14:01 +00:00
Shawn Guo 9b7c547f77 ARM: Update mach-types to fix mxs build breakage
Add entry m28evk to fix the following mxs build breakage.

  CHK     include/generated/compile.h
  CC      arch/arm/mach-mxs/clock-mx28.o
arch/arm/mach-mxs/clock-mx28.c: In function 'clk_misc_init':
arch/arm/mach-mxs/clock-mx28.c:748: error: implicit declaration of
function 'machine_is_m28evk'
make[1]: *** [arch/arm/mach-mxs/clock-mx28.o] Error 1
make: *** [arch/arm/mach-mxs] Error 2

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-11-17 07:49:17 +08:00
Russell King 628e1110fe ARM: Add a few machine types to mach-types
Add vision_ep9307, rwi_ews, usb_a9g20, karo, apf9328, tx37, tx25,
tx51, mx51_m2id, pca101, gplugd, smdk4212 and smdk4412.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-10-17 13:28:46 +01:00
Eric Bénard 0d6cfa3a75 ARM: 7051/1: cpuimx* boards: fix mach-types errors
I made some changes to the entry in the ARM Machine Registry after
submission which was the wrong thing to do.
This patch should help to fix this error.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-08-22 15:57:22 +01:00
Oleg Drokin 1d08fd9f6a Update Nook Color machine 3284 to common Encore name
Machine database already updated:
http://www.arm.linux.org.uk/developer/machines/list.php?id=3284

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-08-10 03:41:05 -07:00
Russell King 60ba536913 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-14 21:36:55 +01:00
Russell King 6f82f4db80 ARM: Update (and cut down) mach-types
As many entries have never been submitted to mainline, there's no point
them existing in this file.  So remove the entries which aren't relevant
for mainline.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-20 18:07:44 +00:00
Russell King 4a683a2c5e ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-07 09:04:48 +00:00
Russell King 440e2e4759 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-12 23:31:02 +00:00
Russell King a14d040408 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09 22:49:26 +01:00
Russell King d8495378e2 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-12 21:14:53 +01:00
Russell King 99a0099a84 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-01 11:32:58 +01:00
Russell King 48edcfcfbf ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-20 15:37:39 +00:00
Russell King 0fa11802e0 ARM: Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20 14:17:16 +00:00
Russell King ba45d52574 [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-28 22:17:45 +00:00
Linus Torvalds a695bc6836 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  PCMCIA: fix pxa2xx_lubbock modular build error
  [ARM] Update mach-types
  [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c
  [ARM] pxa/cm-x300: add PWM backlight support
  revert "[ARM] pxa/cm-x300: add PWM backlight support"
  ARM: use flush_kernel_dcache_area() for dmabounce
  ARM: add size argument to __cpuc_flush_dcache_page
  ARM: 5848/1: kill flush_ioremap_region()
  ARM: cache-l2x0: make better use of background cache handling
  ARM: cache-l2x0: avoid taking spinlock for every iteration
  [ARM] Kirkwood: Add LaCie Network Space v2 support
  ARM: dove: fix the mm mmu flags of the pj4 procinfo
2009-12-17 15:53:41 -08:00
Russell King d93626e861 [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-16 20:08:57 +00:00
Sam Ravnborg 66206536fe arm: move mach-types to include/generated
Simplified arch/arm/Makefile by dropping the maketools target
It was undocumented and not needed

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Russell King 9faf3c1d0d [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-25 22:17:36 +00:00
Russell King ba97836503 [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-18 21:42:01 +01:00
Russell King c1cb6b7fb5 [ARM] Update mach-types
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-09-12 12:00:17 +01:00