Commit Graph

32296 Commits

Author SHA1 Message Date
Paul E. McKenney 710426068d srcu: Hold srcu_struct ->lock when updating ->srcu_gp_seq
A read of the srcu_struct structure's ->srcu_gp_seq field should not
need READ_ONCE() when that structure's ->lock is held.  Except that this
lock is not always held when updating this field.  This commit therefore
acquires the lock around updates and removes a now-unneeded READ_ONCE().

This data race was reported by KCSAN.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
[ paulmck: Switch from READ_ONCE() to lock per Peter Zilstra question. ]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2020-02-20 16:01:11 -08:00
Paul E. McKenney 39f91504a0 srcu: Fix process_srcu()/srcu_batches_completed() datarace
The srcu_struct structure's ->srcu_idx field is accessed locklessly,
so reads must use READ_ONCE().  This commit therefore adds the needed
READ_ONCE() invocation where it was missed.

This data race was reported by KCSAN.  Not appropriate for backporting
due to failure being unlikely.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:01:11 -08:00
Paul E. McKenney 8c9e0cb323 srcu: Fix __call_srcu()/srcu_get_delay() datarace
The srcu_struct structure's ->srcu_gp_seq_needed_exp field is accessed
locklessly, so updates must use WRITE_ONCE().  This commit therefore
adds the needed WRITE_ONCE() invocations.

This data race was reported by KCSAN.  Not appropriate for backporting
due to failure being unlikely.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:01:11 -08:00
Paul E. McKenney 7ff8b4502b srcu: Fix __call_srcu()/process_srcu() datarace
The srcu_node structure's ->srcu_gp_seq_needed_exp field is accessed
locklessly, so updates must use WRITE_ONCE().  This commit therefore
adds the needed WRITE_ONCE() invocations.

This data race was reported by KCSAN.  Not appropriate for backporting
due to failure being unlikely.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-02-20 16:01:11 -08:00
Linus Torvalds 89a47dd1af Kbuild updates for v5.6 (2nd)
- fix randconfig to generate a sane .config
 
  - rename hostprogs-y / always to hostprogs / always-y, which are
    more natual syntax.
 
  - optimize scripts/kallsyms
 
  - fix yes2modconfig and mod2yesconfig
 
  - make multiple directory targets ('make foo/ bar/') work
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl47NfMVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRGwP/3AHO8P0wGEeFKs3ziSMjs2W7/Pj
 lN08Kuxm0u3LnyEEcHVUveoi+xBYqvrw0RsGgYf5S8q0Mpep7MPqbfkDUxV/0Zkj
 QP2CsvOTbjdBjH7q3ojkwLcDl0Pxu9mg3eZMRXZ2WQeNXuMRw6Bicoh7ElvB1Bv/
 HC+j30i2Me3cf/riQGSAsstvlXyIR8RaerR8PfRGESTysiiN76+JcHTatJHhOJL9
 O6XKkzo8/CXMYKKVF4Ae4NP+WFg6E96/pAPx0Rf47RbPX9UG35L9rkzTDnk70Ms6
 OhKiu3hXsRX7mkqApuoTqjge4+iiQcKZxYmMXU1vGlIRzjwg19/4YFP6pDSCcnIu
 kKb8KN4o4N41N7MFS3OLZWwISA8Vw6RbtwDZ3AghDWb7EHb9oNW42mGfcAPr1+wZ
 /KH6RHTzaz+5q2MgyMY1NhADFrhIT9CvDM+UJECgbokblnw7PHAnPmbsuVak9ZOH
 u9ojO1HpTTuIYO6N6v4K5zQBZF1N+RvkmBnhHd8j6SksppsCoC/G62QxgXhF2YK3
 FQMpATCpuyengLxWAmPEjsyyPOlrrdu9UxqNsXVy5ol40+7zpxuHwKcQKCa9urJR
 rcpbIwLaBcLhHU4BmvBxUk5aZxxGV2F0O0gXTOAbT2xhd6BipZSMhUmN49SErhQm
 NC/coUmQX7McxMXh
 =sv4U
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config
2020-02-09 16:05:50 -08:00
Linus Torvalds 1a2a76c268 A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
    configured in legacy mode. This is caused by an ordering issue
    introduced in the recent changes which skip PIT initialization when the
    TSC and APIC frequencies are already known.
 
  - Handle malformed SRAT tables during early ACPI parsing which caused an
    infinite loop anda boot hang.
 
  - Fix a long standing race in the affinity setting code which affects PCI
    devices with non-maskable MSI interrupts. The problem is caused by the
    non-atomic writes of the MSI address (destination APIC id) and data
    (vector) fields which the device uses to construct the MSI message. The
    non-atomic writes are mandated by PCI.
 
    If both fields change and the device raises an interrupt after writing
    address and before writing data, then the MSI block constructs a
    inconsistent message which causes interrupts to be lost and subsequent
    malfunction of the device.
 
    The fix is to redirect the interrupt to the new vector on the current
    CPU first and then switch it over to the new target CPU. This allows to
    observe an eventually raised interrupt in the transitional stage (old
    CPU, new vector) to be observed in the APIC IRR and retriggered on the
    new target CPU and the new vector. The potential spurious interrupts
    caused by this are harmless and can in the worst case expose a buggy
    driver (all handlers have to be able to deal with spurious interrupts as
    they can and do happen for various reasons).
 
  - Add the missing suspend/resume mechanism for the HYPERV hypercall page
    which prevents resume hibernation on HYPERV guests. This change got
    lost before the merge window.
 
  - Mask the IOAPIC before disabling the local APIC to prevent potentially
    stale IOAPIC remote IRR bits which cause stale interrupt lines after
    resume.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AEJwTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoWY2D/47ur9gsVQGryKzneVAr0SCsq4Un11e
 uifX4ldu4gCEBRTYhpgcpiFKeLvY/QJ6uOD+gQUHyy/s+lCf6yzE6UhXEqSCtcT7
 LkSxD8jAFf6KhMA6iqYBfyxUsPMXBetLjjHWsyc/kf15O/vbYm7qf05timmNZkDS
 S7C+yr3KRqRjLR7G7t4twlgC9aLcNUQihUdsH2qyTvjnlkYHJLDa0/Js7bFYYKVx
 9GdUDLvPFB1mZ76g012De4R3kJsWitiyLlQ38DP5VysKulnszUCdiXlgCEFrgxvQ
 OQhLafQzOAzvxQmP+1alODR0dmJZA8k0zsDeeTB/vTpRvv6+Pe2qUswLSpauBzuq
 TpDsrv8/5pwZh28+91f/Unk+tH8NaVNtGe/Uf+ePxIkn1nbqL84o4NHGplM6R97d
 HAWdZQZ1cGRLf6YRRJ+57oM/5xE3vBbF1Wn0+QDTFwdsk2vcxuQ4eB3M/8E1V7Zk
 upp8ty50bZ5+rxQ8XTq/eb8epSRnfLoBYpi4ux6MIOWRdmKDl40cDeZCzA2kNP7m
 qY1haaRN3ksqvhzc0Yf6cL+CgvC4ur8gRHezfOqmBzVoaLyVEFIVjgjR/ojf0bq8
 /v+L9D5+IdIv4jEZruRRs0gOXNDzoBbvf0qKGaO0tUTWiDsv7c5AGixp8aozniHS
 HXsv1lIpRuC7WQ==
 =WxKD
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Ensure that the PIT is set up when the local APIC is disable or
     configured in legacy mode. This is caused by an ordering issue
     introduced in the recent changes which skip PIT initialization when
     the TSC and APIC frequencies are already known.

   - Handle malformed SRAT tables during early ACPI parsing which caused
     an infinite loop anda boot hang.

   - Fix a long standing race in the affinity setting code which affects
     PCI devices with non-maskable MSI interrupts. The problem is caused
     by the non-atomic writes of the MSI address (destination APIC id)
     and data (vector) fields which the device uses to construct the MSI
     message. The non-atomic writes are mandated by PCI.

     If both fields change and the device raises an interrupt after
     writing address and before writing data, then the MSI block
     constructs a inconsistent message which causes interrupts to be
     lost and subsequent malfunction of the device.

     The fix is to redirect the interrupt to the new vector on the
     current CPU first and then switch it over to the new target CPU.
     This allows to observe an eventually raised interrupt in the
     transitional stage (old CPU, new vector) to be observed in the APIC
     IRR and retriggered on the new target CPU and the new vector.

     The potential spurious interrupts caused by this are harmless and
     can in the worst case expose a buggy driver (all handlers have to
     be able to deal with spurious interrupts as they can and do happen
     for various reasons).

   - Add the missing suspend/resume mechanism for the HYPERV hypercall
     page which prevents resume hibernation on HYPERV guests. This
     change got lost before the merge window.

   - Mask the IOAPIC before disabling the local APIC to prevent
     potentially stale IOAPIC remote IRR bits which cause stale
     interrupt lines after resume"

* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Mask IOAPIC entries when disabling the local APIC
  x86/hyperv: Suspend/resume the hypercall page for hibernation
  x86/apic/msi: Plug non-maskable MSI affinity race
  x86/boot: Handle malformed SRAT tables during early ACPI parsing
  x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
2020-02-09 12:11:12 -08:00
Linus Torvalds f41377609a Two fixes for the SMP related functionality:
- Make the UP version of smp_call_function_single() match SMP semantics
    when called for a not available CPU.  Instead of emitting a warning and
    assuming that the function call target is CPU0, return a proper error
    code like the SMP version does.
 
  - Remove a superfluous check in smp_call_function_many_cond()
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5ADFYTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoZdoD/9I+zp3QWj0/xxpNEOZj5yKhaxDLMqK
 OjgIvKGOfd5kWk+y57iuvPZKiacnHPlixni9H0KlAz6FW8V40jQz5iOCpnw6OTSO
 mqET7dn7ei7+9fpKmivfAybf8Jz9dy4ouZUwxEo0L+AizI6JE1eR6tpCbt09I9Dk
 uOCIcolTFX32JF4p7IHSlk1ViU8jC/L1zO7In7aqizpwQt9uVxLRUZeIb3nSftBY
 iJs8Kubfb+Fuc7+k5CXYmXLC6toqhWvsN1546ngC+sYz4nbgGUcnYc+U9slstGkr
 fHiP2uuTyYdIwKYrF7KYRv0NdjrEt4w+ZpK49AHoc0ZNs8MnVhcGq4riWWjmfuGk
 ZTbmEIQu9cxEaecQcIsIVpi7xpap0LfFTTze0YUshYlHtONQ4xAsFo2vjbBTMDqU
 P31aVv95bgHDaDv12pQu3DV/ztW4Xi5/6KynDkeCBo9VdaUwGbpV9Ro0SCWSt5qH
 OymyN1x+JIozd2LGNA8Vat7FxpktgqTCe2TMLLwqL4fX4GtTHbwC9zFyfvcey2Kn
 KKgP1c0rcHYmdyYvFd6mumjhzusBGCUVL/h9SSKboNQWZ0/fL1KyFZseM5Sqwexy
 76qVA2zY0ZJ0QN77vZqZgWWf2UUlxF7++Vi0cfuCtt2+V4SiYN7RzeO8SpAKSD0M
 4ycr8w8uXQk45Q==
 =XfHp
 -----END PGP SIGNATURE-----

Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull SMP fixes from Thomas Gleixner:
 "Two fixes for the SMP related functionality:

   - Make the UP version of smp_call_function_single() match SMP
     semantics when called for a not available CPU. Instead of emitting
     a warning and assuming that the function call target is CPU0,
     return a proper error code like the SMP version does.

   - Remove a superfluous check in smp_call_function_many_cond()"

* tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp/up: Make smp_call_function_single() match SMP semantics
  smp: Remove superfluous cond_func check in smp_call_function_many_cond()
2020-02-09 12:09:43 -08:00
Linus Torvalds ca21b9b370 A set of fixes and improvements for the perf subsystem:
- Kernel fixes:
 
    - Install cgroup events to the correct CPU context to prevent a
      potential list double add
 
    - Prevent am intgeer underflow in the perf mlock acounting
 
    - Add a missing prototyp for arch_perf_update_userpage()
 
  - Tooling:
 
    - Add a missing unlock in the error path of maps__insert() in perf maps.
 
    - Fix the build with the latest libbfd
 
    - Fix the perf parser so it does not delete parse event terms, which
      caused a regression for using perf with the ARM CoreSight as the sink
      confuguration was missing due to the deletion.
 
    - Fix the double free in the perf CPU map merging test case
 
    - Add the missing ustring support for the perf probe command
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5AC0ITHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoaJtD/4jEdN6KNGVJIQ5jOYdchXK/zb68plS
 3By6CegbaNq1SU5UPIdMX4BkznVGaVtJU/0hWuvD/ycpBTAMgKjwalYJtAC+anVi
 JhG7NiPRV1Nhm+7eZ/78mUpW4CUimTlvZVzU/yneYdFm2klvcxUHblJYSqEGp0AS
 r2aZRsqQnWSoI/+z+0THO8tI+HLSpkmKy2slLxaZphI0VjSrjWPDHfF6eAOyl/dq
 lTCz+tjd6EytELL+lhWFsGXYAi6HPKP3T4yPRH+eDYKQmByYaEYbK3E8wg/0XB/J
 2AHgSBf9pSPDBIkLOWOidmkmWgZD9ykCTyOPu4N0S70+NeaCm2nXLTOQ7dnyLE7t
 WCx8mvnIS2hshNUoXMkarG5LYexPupDMMEfHyUT5+T2rKxacKWLaRoIV+JCsUpQb
 m6eU3+n/YsN1C05V75Fuztt4irGhltlQxcG8F3gH/vqSy6VDdZb8lMU6+iyE2VKG
 ezsI7AMQkT6LrTGa2hXHHnnluaxHHSA32GPe4W1QTwMCMWMtRTwQHBBLoJ4mC0wk
 iujB9DVuh7ljmr7QSG9ZYV91eplpzJDUC54P6Qs/p7ouG4YzkIO6glt6BOgBmbp7
 YkrJtGpV6npjJmLckktcSd9rtnCzot6yGxeaIVfLPhhtf2KECSCckCyddwkakt0A
 wwVVBe8RNxXf2A==
 =xu7D
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "A set of fixes and improvements for the perf subsystem:

  Kernel fixes:

   - Install cgroup events to the correct CPU context to prevent a
     potential list double add

   - Prevent an integer underflow in the perf mlock accounting

   - Add a missing prototype for arch_perf_update_userpage()

  Tooling:

   - Add a missing unlock in the error path of maps__insert() in perf
     maps.

   - Fix the build with the latest libbfd

   - Fix the perf parser so it does not delete parse event terms, which
     caused a regression for using perf with the ARM CoreSight as the
     sink configuration was missing due to the deletion.

   - Fix the double free in the perf CPU map merging test case

   - Add the missing ustring support for the perf probe command"

* tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf maps: Add missing unlock to maps__insert() error case
  perf probe: Add ustring support for perf probe command
  perf: Make perf able to build with latest libbfd
  perf test: Fix test case Merge cpu map
  perf parse: Copy string to perf_evsel_config_term
  perf parse: Refactor 'struct perf_evsel_config_term'
  kernel/events: Add a missing prototype for arch_perf_update_userpage()
  perf/cgroups: Install cgroup events to correct cpuctx
  perf/core: Fix mlock accounting in perf_mmap()
2020-02-09 12:04:09 -08:00
Linus Torvalds 2fbc23c738 Two small fixes for the time(r) subsystem:
- Handle a subtle race between the clocksource watchdog and a concurrent
     clocksource watchdog stop/start sequence correctly to prevent a timer
     double add bug.
 
   - Fix the file path for the core time namespace file.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5ADSUTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoXajD/9BiKKMQu11ExpG/VddjCM6M9eHqCAp
 6tFWtjN1u49mw2rqH88WlwcOqQpMHvASPEQ5SekYhD1vLX4OSk1E58No9UNKQANE
 xQjQals4MmuvPtBZe6Lp5ORSKKvFRfZCt/4TZ5NcrUXLGyWaRRhHbuSjKtJZ8tko
 NRYcNSYnDOABL6LhKnLwAVsI9faeymKsrwwxW+FQerclCj1QaJLbFC4uenpCwKjF
 rz5qdg9wk7NTQ6KfX2qQrQgnNGUywBTvL0pGtGV+l3VPZMMYyaqSWpPaqZ+McogS
 FP60sDOFy8XlyVkqD/FdKnZwss1akXmkhnh2t/41mDrFE6kpsOBR0q5ZpAExI6N2
 uUN692kb2mVGpC+VLEED/R3I4cixC0Ux1UE+x/4qnG+CkQDoFU5QVgTzOTCSUfE3
 yiDTVOniAz998uoKJID8F7JjQH5g8NJoNODYZ8mT/ctntOl7Q7EXEL5nBOLH36KA
 sl1gTX0hPoyHFmV5VJRmyAnzF3NkVmQ3FI9Sya93NJluOnhSwma01wcan9Dlnq6I
 5HUn71+TCSR18pr7adIWqIB9gJuVu6ssZtZD8nxUH1pG1gv/Odp6WFEVnmhtaNVG
 cOmugi0DALndqLiTACTCQqnwb3wIeQ5QRd81HdMmjV1DgqE21U76s6JAR1tXO9eq
 eNDQ00Cb7dcBYQ==
 =0zFj
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "Two small fixes for the time(r) subsystem:

   - Handle a subtle race between the clocksource watchdog and a
     concurrent clocksource watchdog stop/start sequence correctly to
     prevent a timer double add bug.

   - Fix the file path for the core time namespace file"

* tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: Prevent double add_timer_on() for watchdog_timer
  MAINTAINERS: Correct path to time namespace source file
2020-02-09 12:00:12 -08:00
Linus Torvalds f06bed87d7 A set of fixes for the interrupt subsystem:
- Provision only ACPI enabled redistributors on GICv3
 
  - Use the proper command colums when building the INVALL command for the
    GICv3-ITS
 
  - Ensure the allocation of the L2 vPE table for GICv4.1
 
  - Correct the GICv4.1 VPROBASER programming so it uses the proper size
 
  - A set of small GICv4.1 tidy up patches
 
  - Configuration cleanup for C-SKY interrupt chip
 
  - Clarify the function documentation for irq_set_wake() to document that
    the wakeup functionality is orthogonal to the irq disable/enable
    mechanism.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl5ACB4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYodrNEAC22Nu3gGHKE/AUPZP8q53wl5axVZ4M
 reM3Wnw7LcUqmXHApbG/kJMbkGkN8sQhieyuTY2UBea+K06nox6aulBjLZ2U6UGE
 /5vFD+qB8a8AvSjyVGi0BU04h4RXJEZ9MxM34VDBiabQ74yiEIQvEYhyGVrMVRoM
 HC2UP2Y3SgYbBzRPL/sXUjNtPB6QAxABm41PK/2b7y36eULHv3LszqrEcNyuJ7qm
 2wEppOmB8+4j6d12zxOJh2hE4RLvNwKgWpcbEofVsI0FdCTcJ/0wVhdTPJmzLz2m
 kNFhLQ6qEhCj3ca0tF3sPwl+g0lHKVBtWMkIjKbC4N8g7pBvzj46Ys0/umuTnY9T
 pQvJ+N7Jcnbm2IkxYL707X8GewJjcGdYqVklXOJDyfCKm9G1h2lrCQmEjJaVHGVi
 f5eQVg401ndqu3L4sSctQM9Qwd3RnVZwanwbPBSD4sbTRdQseRTezIM61bvzvppF
 mIwflkfHB/CsrszfFrXHDy22GnsrpR+TTJWgPFahczZCAIxvdv8s+lsMpkZ1oXfg
 21cT0Bpj9JT6MIU9K7nalWmAO2Ylb0qDofLNlD1tb9pLWQDSHdR/hEm9o+4Msa/6
 /cvrVLVwwM1P0hU1lI7VRKlbsZ0sYWLY1uro05lvckt4QO9WFAZsafnmAVOzN/g5
 l7voNi/F8sww2Q==
 =a9t/
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Provision only ACPI enabled redistributors on GICv3

   - Use the proper command colums when building the INVALL command for
     the GICv3-ITS

   - Ensure the allocation of the L2 vPE table for GICv4.1

   - Correct the GICv4.1 VPROBASER programming so it uses the proper
     size

   - A set of small GICv4.1 tidy up patches

   - Configuration cleanup for C-SKY interrupt chip

   - Clarify the function documentation for irq_set_wake() to document
     that the wakeup functionality is orthogonal to the irq
     disable/enable mechanism"

* tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors
  irqchip/gic-v3-its: Remove superfluous WARN_ON
  irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd()
  irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level
  irqchip/gic-v4.1: Set vpe_l1_base for all redistributors
  irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE
  genirq: Clarify that irq wake state is orthogonal to enable/disable
  irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
  irqchip: Some Kconfig cleanup for C-SKY
  irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
2020-02-09 11:56:41 -08:00
Linus Torvalds 291abfea47 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from David Miller:

 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris.

 2) Fix thermal zone registration in iwlwifi, from Andrei
    Otcheretianski.

 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer.

 4) Use after free in mptcp, from Florian Westphal.

 5) Use after free in wireguard's root_remove_peer_lists, from Eric
    Dumazet.

 6) Properly access packets heads in bonding alb code, from Eric
    Dumazet.

 7) Fix data race in skb_queue_len(), from Qian Cai.

 8) Fix regression in r8169 on some chips, from Heiner Kallweit.

 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang.

10) Certain kinds of set link netlink operations can cause a NULL deref
    in the ipv6 addrconf code. Fix from Eric Dumazet.

11) Don't cancel uninitialized work queue in drop monitor, from Ido
    Schimmel.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  net: thunderx: use proper interface type for RGMII
  mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap
  bpf: Improve bucket_log calculation logic
  selftests/bpf: Test freeing sockmap/sockhash with a socket in it
  bpf, sockhash: Synchronize_rcu before free'ing map
  bpf, sockmap: Don't sleep while holding RCU lock on tear-down
  bpftool: Don't crash on missing xlated program instructions
  bpf, sockmap: Check update requirements after locking
  drop_monitor: Do not cancel uninitialized work item
  mlxsw: spectrum_dpipe: Add missing error path
  mlxsw: core: Add validation of hardware device types for MGPIR register
  mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort
  selftests: mlxsw: Add test cases for local table route replacement
  mlxsw: spectrum_router: Prevent incorrect replacement of local table routes
  net: dsa: microchip: enable module autoprobe
  ipv6/addrconf: fix potential NULL deref in inet6_set_link_af()
  dpaa_eth: support all modes with rate adapting PHYs
  net: stmmac: update pci platform data to use phy_interface
  net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter
  net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter
  ...
2020-02-08 17:15:08 -08:00
Linus Torvalds c9d35ee049 Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs file system parameter updates from Al Viro:
 "Saner fs_parser.c guts and data structures. The system-wide registry
  of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is
  the horror switch() in fs_parse() that would have to grow another case
  every time something got added to that system-wide registry.

  New syntax types can be added by filesystems easily now, and their
  namespace is that of functions - not of system-wide enum members. IOW,
  they can be shared or kept private and if some turn out to be widely
  useful, we can make them common library helpers, etc., without having
  to do anything whatsoever to fs_parse() itself.

  And we already get that kind of requests - the thing that finally
  pushed me into doing that was "oh, and let's add one for timeouts -
  things like 15s or 2h". If some filesystem really wants that, let them
  do it. Without somebody having to play gatekeeper for the variants
  blessed by direct support in fs_parse(), TYVM.

  Quite a bit of boilerplate is gone. And IMO the data structures make a
  lot more sense now. -200LoC, while we are at it"

* 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits)
  tmpfs: switch to use of invalfc()
  cgroup1: switch to use of errorfc() et.al.
  procfs: switch to use of invalfc()
  hugetlbfs: switch to use of invalfc()
  cramfs: switch to use of errofc() et.al.
  gfs2: switch to use of errorfc() et.al.
  fuse: switch to use errorfc() et.al.
  ceph: use errorfc() and friends instead of spelling the prefix out
  prefix-handling analogues of errorf() and friends
  turn fs_param_is_... into functions
  fs_parse: handle optional arguments sanely
  fs_parse: fold fs_parameter_desc/fs_parameter_spec
  fs_parser: remove fs_parameter_description name field
  add prefix to fs_context->log
  ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log
  new primitive: __fs_parse()
  switch rbd and libceph to p_log-based primitives
  struct p_log, variants of warnf() et.al. taking that one instead
  teach logfc() to handle prefices, give it saner calling conventions
  get rid of cg_invalf()
  ...
2020-02-08 13:26:41 -08:00
David S. Miller 2696e1146d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2020-02-07

The following pull-request contains BPF updates for your *net* tree.

We've added 15 non-merge commits during the last 10 day(s) which contain
a total of 12 files changed, 114 insertions(+), 31 deletions(-).

The main changes are:

1) Various BPF sockmap fixes related to RCU handling in the map's tear-
   down code, from Jakub Sitnicki.

2) Fix macro state explosion in BPF sk_storage map when calculating its
   bucket_log on allocation, from Martin KaFai Lau.

3) Fix potential BPF sockmap update race by rechecking socket's established
   state under lock, from Lorenz Bauer.

4) Fix crash in bpftool on missing xlated instructions when kptr_restrict
   sysctl is set, from Toke Høiland-Jørgensen.

5) Fix i40e's XSK wakeup code to return proper error in busy state and
   various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski.

6) Fix the way modifiers are skipped in BTF in the verifier while walking
   pointers to avoid program rejection, from Alexei Starovoitov.

7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and
   ii) to fix undefined reference linker errors for older gcc version due to
   order of passed gcc parameters, from Yulia Kartseva and Song Liu.

8) Fix a trampoline_count BPF kselftest warning about missing braces around
   initializer, from Andrii Nakryiko.

9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in
   bpftool, from Michal Rostecki.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-08 15:01:03 +01:00
Stephen Boyd f9f21cea31 genirq: Clarify that irq wake state is orthogonal to enable/disable
There's some confusion around if an irq that's disabled with disable_irq()
can still wake the system from sleep states such as "suspend to RAM".

Clarify this in the kernel documentation for irq_set_irq_wake() so that
it's clear that an irq can be disabled and still wake the system if it has
been marked for wakeup.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org
2020-02-07 21:37:08 +01:00
Al Viro 58c025f0e8 cgroup1: switch to use of errorfc() et.al.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:43 -05:00
Al Viro d7167b1499 fs_parse: fold fs_parameter_desc/fs_parameter_spec
The former contains nothing but a pointer to an array of the latter...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:37 -05:00
Eric Sandeen 96cafb9ccb fs_parser: remove fs_parameter_description name field
Unused now.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:36 -05:00
Al Viro fbc2d1686d get rid of cg_invalf()
pointless alias for invalf()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-02-07 14:48:31 -05:00
Paul E. McKenney 1e474b28e7 smp/up: Make smp_call_function_single() match SMP semantics
In CONFIG_SMP=y kernels, smp_call_function_single() returns -ENXIO when
invoked for a non-existent CPU.  In contrast, in CONFIG_SMP=n kernels,
a splat is emitted and smp_call_function_single() otherwise silently
ignores its "cpu" argument, instead pretending that the caller intended
to have something happen on CPU 0.  Given that there is now code that
expects smp_call_function_single() to return an error if a bad CPU was
specified, this difference in semantics needs to be addressed.

Bring the semantics of the CONFIG_SMP=n version of
smp_call_function_single() into alignment with its CONFIG_SMP=y
counterpart.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200205143409.GA7021@paulmck-ThinkPad-P72
2020-02-07 15:34:12 +01:00
Linus Torvalds d854b2d639 kgdb fixes for 5.6-rc1
One of the simplifications added for 5.6-rc1 has caused build
 regressions on some platforms (it was reported for sparc64).
 This pull request fixes it with a direct revert.
 
 Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAl48JNUACgkQfOMlXTn3
 iKF7cA/9G3hl4IB1D2OfbbLb6lXPu+TEWDsQk7Y5CmKgbclMv+JL684TJCU7rnFB
 Xxjho97Cj9bqR3ZGDInxLcJrAnbaD6756UC7k5jVUIcdFFhprjdgWImyJVs6VXoe
 ESahpSna+Ap3ZsMBgQJUfnBbDzY/B3jmPQ8/f7qOIjBb17AdarisClk2CdbY90Gi
 0dfJti65SLqE10on7Clx+9HmNkPp9Rs+1+4O9r2LW5c9b6aNop8iQPdLdl7/B2Me
 V9Vs5uAsLqNKBpyFuq3PG1AXzK53gK2N3wZqmOPAuKAObDM/wUqvVHaAJHqiIWN9
 U+Dn9aZCIW3Mbeat4RijVT8CCoz1WEvCQM1MUk5sbgBnQ90vwSyDmJrA88GMoHtI
 wmP5OJL/EdghGWG9+PcFH2+axD87iEq48hxVXlB9UTtvoyjLkkiXm3WvOx2UC8rX
 8tjEZvivMO3GeJBxYQUXvSFzGUeJAMZhMQm9+0qaw//SJK5GyEG0CfDDp5Ts1q2w
 +F689/TaygpOZGP5m1iFqhNAoR03g+NTX33/CYoa+Yplnn+j+LU4ZTlNq4vl1VY6
 lATR3Eu/vLYhCqdeXaZpRx4cthEFQ3kl8tT53RU2Ip20cNQkNooHPpCpkk0vSuGx
 X0PV9CX/nAFWGrfbJLCW3AQ2ZTxqdl8i2Q7HzOJUJPrddppqN/U=
 =Pb+W
 -----END PGP SIGNATURE-----

Merge tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb fix from Daniel Thompson:
 "One of the simplifications added for 5.6-rc1 has caused build
  regressions on some platforms (it was reported for sparc64).

  This fixes it with a revert"

* tag 'kgdb-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
2020-02-06 09:05:42 -08:00
Daniel Thompson fcf2736c82 Revert "kdb: Get rid of confusing diag msg from "rd" if current task has no regs"
This reverts commit bbfceba15f.

When DBG_MAX_REG_NUM is zero then a number of symbols are conditionally
defined. It is therefore not possible to check it using C expressions.

Reported-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-02-06 11:40:09 +00:00
Linus Torvalds e310396bb8 Tracing updates:
- Added new "bootconfig".
    Looks for a file appended to initrd to add boot config options.
    This has been discussed thoroughly at Linux Plumbers.
    Very useful for adding kprobes at bootup.
    Only enabled if "bootconfig" is on the real kernel command line.
 
  - Created dynamic event creation.
    Merges common code between creating synthetic events and
      kprobe events.
 
  - Rename perf "ring_buffer" structure to "perf_buffer"
 
  - Rename ftrace "ring_buffer" structure to "trace_buffer"
    Had to rename existing "trace_buffer" to "array_buffer"
 
  - Allow trace_printk() to work withing (some) tracing code.
 
  - Sort of tracing configs to be a little better organized
 
  - Fixed bug where ftrace_graph hash was not being protected properly
 
  - Various other small fixes and clean ups
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXjtAURQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qshOAQDzopQmvAVrrI6oogghr8JQA30Z2yqT
 i+Ld7vPWL2MV9wEA1S+zLGDSYrj8f/vsCq6BxRYT1ApO+YtmY6LTXiUejwg=
 =WNds
 -----END PGP SIGNATURE-----

Merge tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:

 - Added new "bootconfig".

   This looks for a file appended to initrd to add boot config options,
   and has been discussed thoroughly at Linux Plumbers.

   Very useful for adding kprobes at bootup.

   Only enabled if "bootconfig" is on the real kernel command line.

 - Created dynamic event creation.

   Merges common code between creating synthetic events and kprobe
   events.

 - Rename perf "ring_buffer" structure to "perf_buffer"

 - Rename ftrace "ring_buffer" structure to "trace_buffer"

   Had to rename existing "trace_buffer" to "array_buffer"

 - Allow trace_printk() to work withing (some) tracing code.

 - Sort of tracing configs to be a little better organized

 - Fixed bug where ftrace_graph hash was not being protected properly

 - Various other small fixes and clean ups

* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
  bootconfig: Show the number of nodes on boot message
  tools/bootconfig: Show the number of bootconfig nodes
  bootconfig: Add more parse error messages
  bootconfig: Use bootconfig instead of boot config
  ftrace: Protect ftrace_graph_hash with ftrace_sync
  ftrace: Add comment to why rcu_dereference_sched() is open coded
  tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
  tracing: Annotate ftrace_graph_hash pointer with __rcu
  bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
  tracing: Use seq_buf for building dynevent_cmd string
  tracing: Remove useless code in dynevent_arg_pair_add()
  tracing: Remove check_arg() callbacks from dynevent args
  tracing: Consolidate some synth_event_trace code
  tracing: Fix now invalid var_ref_vals assumption in trace action
  tracing: Change trace_boot to use synth_event interface
  tracing: Move tracing selftests to bottom of menu
  tracing: Move mmio tracer config up with the other tracers
  tracing: Move tracing test module configs together
  tracing: Move all function tracing configs together
  tracing: Documentation for in-kernel synthetic event API
  ...
2020-02-06 07:12:11 +00:00
Steven Rostedt (VMware) 54a16ff6f2 ftrace: Protect ftrace_graph_hash with ftrace_sync
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.

Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72

Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05 17:16:42 -05:00
Steven Rostedt (VMware) 16052dd5bd ftrace: Add comment to why rcu_dereference_sched() is open coded
Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).

Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05 17:15:57 -05:00
Amol Grover fd0e6852c4 tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison

Use rcu_dereference_protected to dereference the newly annotated pointer.

Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com

Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05 17:14:37 -05:00
Amol Grover 24a9729f83 tracing: Annotate ftrace_graph_hash pointer with __rcu
Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison

Use rcu_dereference_protected to access the __rcu annotated pointer.

Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com

Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05 17:14:26 -05:00
Ingo Molnar fdff7c21ea Merge branch 'linus' into perf/urgent, to synchronize with upstream
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-02-05 08:44:22 +01:00
Linus Torvalds 72f582ff85 Merge branch 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs recursive removal updates from Al Viro:
 "We have quite a few places where synthetic filesystems do an
  equivalent of 'rm -rf', with varying amounts of code duplication,
  wrong locking, etc. That really ought to be a library helper.

  Only debugfs (and very similar tracefs) are converted here - I have
  more conversions, but they'd never been in -next, so they'll have to
  wait"

* 'work.recursive_removal' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems
2020-02-05 05:09:46 +00:00
Masahiro Yamada cde26a6e17 kallsyms: fix type of kallsyms_token_table[]
kallsyms_token_table[] only contains ASCII characters. It should be
char instead of u8.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
2020-02-05 13:45:37 +09:00
Alexey Dobriyan 97a32539b9 proc: convert everything to "struct proc_ops"
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in
seq_file.h.

Conversion rule is:

	llseek		=> proc_lseek
	unlocked_ioctl	=> proc_ioctl

	xxx		=> proc_xxx

	delete ".owner = THIS_MODULE" line

[akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c]
[sfr@canb.auug.org.au: fix kernel/sched/psi.c]
  Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-04 03:05:26 +00:00
Alexei Starovoitov 257af63d7f bpf: Fix modifier skipping logic
Fix the way modifiers are skipped while walking pointers. Otherwise second
level dereferences of 'const struct foo *' will be rejected by the verifier.

Fixes: 9e15db6613 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200201000314.261392-1-ast@kernel.org
2020-02-04 00:06:07 +01:00
Linus Torvalds e17ac02b18 kgdb patches for 5.6-rc1
Everything for kgdb this time around is either simplifications or clean
 ups.
 
 In particular Douglas Anderson's modifications to the backtrace machine
 in the *last* dev cycle have enabled Doug to tidy up some MIPS specific
 backtrace code and stop sharing certain data structures across the
 kernel.  Note that The MIPS folks were on Cc: for the MIPS patch and
 reacted positively (but without an explicit Acked-by).
 
 Doug also got rid of the implicit switching between tasks and register
 sets during some but not of kdb's backtrace actions (because the
 implicit switching was either confusing for users, pointless or both).
 
 Finally there is a coverity fix and patch to replace open coded console
 traversal with the proper helper function.
 
 Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAl44NQ0ACgkQfOMlXTn3
 iKHiXw//d6w5bIuA/HAQ24u/piEDlvYG7TYJ3GJLE1qaQMti9e2Ob48ahgUqQDbH
 K2slFvlhZbrXMHO8BZ1pQt2xaUx9rhmJEBh3GvEudFp4RgwRkebNF2YDuT5yq/Di
 gi3eeB4ZKBvCTsKGI+bNXYQCdTYEJ55gH+vj7jL1Kb2bmrNisnCKhzQhM2RvrkNB
 hRfpuFet3i9WsW9OILyt8aDTHCTKrPkghWiGQZ+9Z3TROI80CbO0Vwmg0xrrYEvh
 //X1Hu+IjoOSfQHNblBm9AMsqeo73HYJ9i5mtDhPL/BVensicY19Q7/bNSdw2yHL
 it3pPpyVGEhMXr/Qdbe2B7oqLUOzawpngdSzzcaa/lUT4zjh0F1tNrIyXjTZ4iCH
 kk2posDN+C/IfcOmZpSGBZQ8Ef57qtSAzvdGpyQPSTChyf8z1ufvCHfIzESpkaPU
 aa5jNwbAZCWmGDR3tGweUAUvgrKNaulbjygTvarNnv5Rt8gNXV7sKCilFF/nFLb4
 Pe9+NUWPSH81cwKyq/r4oG2TGPRUKMg5lo2k/ELHevTtXS5c2P/jtBp7NCstulk2
 RBp4oQhZ+lZNt8kz4l0yRXbaA5kqk3JRd8K76Bkm6E4ceXeX07d7rySkJPmzAGeA
 ZyLPUNGgn9k4XDMlkTUbFVocFtm+gxfelHcR1raDRg3MfYYzVAM=
 =igIA
 -----END PGP SIGNATURE-----

Merge tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux

Pull kgdb updates from Daniel Thompson:
 "Everything for kgdb this time around is either simplifications or
  clean ups.

  In particular Douglas Anderson's modifications to the backtrace
  machine in the *last* dev cycle have enabled Doug to tidy up some MIPS
  specific backtrace code and stop sharing certain data structures
  across the kernel. Note that The MIPS folks were on Cc: for the MIPS
  patch and reacted positively (but without an explicit Acked-by).

  Doug also got rid of the implicit switching between tasks and register
  sets during some but not of kdb's backtrace actions (because the
  implicit switching was either confusing for users, pointless or both).

  Finally there is a coverity fix and patch to replace open coded
  console traversal with the proper helper function"

* tag 'kgdb-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  kdb: Use for_each_console() helper
  kdb: remove redundant assignment to pointer bp
  kdb: Get rid of confusing diag msg from "rd" if current task has no regs
  kdb: Gid rid of implicit setting of the current task / regs
  kdb: kdb_current_task shouldn't be exported
  kdb: kdb_current_regs should be private
  MIPS: kdb: Remove old workaround for backtracing on other CPUs
2020-02-03 16:59:51 +00:00
Tom Zanussi 2b90927c77 tracing: Use seq_buf for building dynevent_cmd string
The dynevent_cmd commands that build up the command string don't need
to do that themselves - there's a seq_buf facility that does pretty
much the same thing those command are doing manually, so use it
instead.

Link: http://lkml.kernel.org/r/eb8a6e835c964d0ab8a38cbf5ffa60746b54a465.1580506712.git.zanussi@kernel.org

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-01 13:10:15 -05:00
Tom Zanussi e9260f6257 tracing: Remove useless code in dynevent_arg_pair_add()
The final addition to q is unnecessary, since q isn't ever used
afterwards.

Link: http://lkml.kernel.org/r/7880a1268217886cdba7035526650195668da856.1580506712.git.zanussi@kernel.org

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-01 13:09:42 -05:00
Tom Zanussi 74403b6c50 tracing: Remove check_arg() callbacks from dynevent args
It's kind of strange to have check_arg() callbacks as part of the arg
objects themselves; it makes more sense to just pass these in when the
args are added instead.

Remove the check_arg() callbacks from those objects which also means
removing the check_arg() args from the init functions, adding them to
the add functions and fixing up existing callers.

Link: http://lkml.kernel.org/r/c7708d6f177fcbe1a36b6e4e8e150907df0fa5d2.1580506712.git.zanussi@kernel.org

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-01 13:09:23 -05:00
Konstantin Khlebnikov febac332a8 clocksource: Prevent double add_timer_on() for watchdog_timer
Kernel crashes inside QEMU/KVM are observed:

  kernel BUG at kernel/time/timer.c:1154!
  BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on().

At the same time another cpu got:

  general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in:

  __hlist_del at include/linux/list.h:681
  (inlined by) detach_timer at kernel/time/timer.c:818
  (inlined by) expire_timers at kernel/time/timer.c:1355
  (inlined by) __run_timers at kernel/time/timer.c:1686
  (inlined by) run_timer_softirq at kernel/time/timer.c:1699

Unfortunately kernel logs are badly scrambled, stacktraces are lost.

Printing the timer->function before the BUG_ON() pointed to
clocksource_watchdog().

The execution of clocksource_watchdog() can race with a sequence of
clocksource_stop_watchdog() .. clocksource_start_watchdog():

expire_timers()
 detach_timer(timer, true);
  timer->entry.pprev = NULL;
 raw_spin_unlock_irq(&base->lock);
 call_timer_fn
  clocksource_watchdog()

					clocksource_watchdog_kthread() or
					clocksource_unbind()

					spin_lock_irqsave(&watchdog_lock, flags);
					clocksource_stop_watchdog();
					 del_timer(&watchdog_timer);
					 watchdog_running = 0;
					spin_unlock_irqrestore(&watchdog_lock, flags);

					spin_lock_irqsave(&watchdog_lock, flags);
					clocksource_start_watchdog();
					 add_timer_on(&watchdog_timer, ...);
					 watchdog_running = 1;
					spin_unlock_irqrestore(&watchdog_lock, flags);

  spin_lock(&watchdog_lock);
  add_timer_on(&watchdog_timer, ...);
   BUG_ON(timer_pending(timer) || !timer->function);
    timer_pending() -> true
    BUG()

I.e. inside clocksource_watchdog() watchdog_timer could be already armed.

Check timer_pending() before calling add_timer_on(). This is sufficient as
all operations are synchronized by watchdog_lock.

Fixes: 75c5158f70 ("timekeeping: Update clocksource with stop_machine")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz
2020-02-01 11:07:56 +01:00
Thomas Gleixner 6f1a4891a5 x86/apic/msi: Plug non-maskable MSI affinity race
Evan tracked down a subtle race between the update of the MSI message and
the device raising an interrupt internally on PCI devices which do not
support MSI masking. The update of the MSI message is non-atomic and
consists of either 2 or 3 sequential 32bit wide writes to the PCI config
space.

   - Write address low 32bits
   - Write address high 32bits (If supported by device)
   - Write data

When an interrupt is migrated then both address and data might change, so
the kernel attempts to mask the MSI interrupt first. But for MSI masking is
optional, so there exist devices which do not provide it. That means that
if the device raises an interrupt internally between the writes then a MSI
message is sent built from half updated state.

On x86 this can lead to spurious interrupts on the wrong interrupt
vector when the affinity setting changes both address and data. As a
consequence the device interrupt can be lost causing the device to
become stuck or malfunctioning.

Evan tried to handle that by disabling MSI accross an MSI message
update. That's not feasible because disabling MSI has issues on its own:

 If MSI is disabled the PCI device is routing an interrupt to the legacy
 INTx mechanism. The INTx delivery can be disabled, but the disablement is
 not working on all devices.

 Some devices lose interrupts when both MSI and INTx delivery are disabled.

Another way to solve this would be to enforce the allocation of the same
vector on all CPUs in the system for this kind of screwed devices. That
could be done, but it would bring back the vector space exhaustion problems
which got solved a few years ago.

Fortunately the high address (if supported by the device) is only relevant
when X2APIC is enabled which implies interrupt remapping. In the interrupt
remapping case the affinity setting is happening at the interrupt remapping
unit and the PCI MSI message is programmed only once when the PCI device is
initialized.

That makes it possible to solve it with a two step update:

  1) Target the MSI msg to the new vector on the current target CPU

  2) Target the MSI msg to the new vector on the new target CPU

In both cases writing the MSI message is only changing a single 32bit word
which prevents the issue of inconsistency.

After writing the final destination it is necessary to check whether the
device issued an interrupt while the intermediate state #1 (new vector,
current CPU) was in effect.

This is possible because the affinity change is always happening on the
current target CPU. The code runs with interrupts disabled, so the
interrupt can be detected by checking the IRR of the local APIC. If the
vector is pending in the IRR then the interrupt is retriggered on the new
target CPU by sending an IPI for the associated vector on the target CPU.

This can cause spurious interrupts on both the local and the new target
CPU.

 1) If the new vector is not in use on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then interrupt entry code will
    ignore that spurious interrupt. The vector is marked so that the
    'No irq handler for vector' warning is supressed once.

 2) If the new vector is in use already on the local CPU then the IRR check
    might see an pending interrupt from the device which is using this
    vector. The IPI to the new target CPU will then invoke the handler of
    the device, which got the affinity change, even if that device did not
    issue an interrupt

 3) If the new vector is in use already on the local CPU and the device
    affected by the affinity change raised an interrupt during the
    transitional state (step #1 above) then the handler of the device which
    uses that vector on the local CPU will be invoked.

expose issues in device driver interrupt handlers which are not prepared to
handle a spurious interrupt correctly. This not a regression, it's just
exposing something which was already broken as spurious interrupts can
happen for a lot of reasons and all driver handlers need to be able to deal
with them.

Reported-by: Evan Green <evgreen@chromium.org>
Debugged-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de
2020-02-01 09:31:47 +01:00
Tom Zanussi 249d7b2ef6 tracing: Consolidate some synth_event_trace code
The synth_event trace code contains some almost identical functions
and some small functions that are called only once - consolidate the
common code into single functions and fold in the small functions to
simplify the code overall.

Link: http://lkml.kernel.org/r/d1c8d8ad124a653b7543afe801d38c199ca5c20e.1580506712.git.zanussi@kernel.org

Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-31 18:35:17 -05:00
Linus Torvalds 7eec11d3a7 Merge branch 'akpm' (patches from Andrew)
Pull updates from Andrew Morton:
 "Most of -mm and quite a number of other subsystems: hotfixes, scripts,
  ocfs2, misc, lib, binfmt, init, reiserfs, exec, dma-mapping, kcov.

  MM is fairly quiet this time.  Holidays, I assume"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  kcov: ignore fault-inject and stacktrace
  include/linux/io-mapping.h-mapping: use PHYS_PFN() macro in io_mapping_map_atomic_wc()
  execve: warn if process starts with executable stack
  reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
  init/main.c: fix misleading "This architecture does not have kernel memory protection" message
  init/main.c: fix quoted value handling in unknown_bootoption
  init/main.c: remove unnecessary repair_env_string in do_initcall_level
  init/main.c: log arguments and environment passed to init
  fs/binfmt_elf.c: coredump: allow process with empty address space to coredump
  fs/binfmt_elf.c: coredump: delete duplicated overflow check
  fs/binfmt_elf.c: coredump: allocate core ELF header on stack
  fs/binfmt_elf.c: make BAD_ADDR() unlikely
  fs/binfmt_elf.c: better codegen around current->mm
  fs/binfmt_elf.c: don't copy ELF header around
  fs/binfmt_elf.c: fix ->start_code calculation
  fs/binfmt_elf.c: smaller code generation around auxv vector fill
  lib/find_bit.c: uninline helper _find_next_bit()
  lib/find_bit.c: join _find_next_bit{_le}
  uapi: rename ext2_swab() to swab() and share globally in swab.h
  lib/scatterlist.c: adjust indentation in __sg_alloc_table
  ...
2020-01-31 12:16:36 -08:00
Linus Torvalds ddaefe8947 Modules updates for v5.6
Summary of modules changes for the 5.6 merge window:
 
 - Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings to
   indicate to the linker that it can perform string deduplication (i.e.,
   duplicate strings are reduced to a single copy in the string table).
   This means any repeated namespace string would be merged to just one
   entry in __ksymtab_strings.
 
 - Various code cleanups and small fixes (fix small memleak in error path,
   improve moduleparam docs, silence rcu warnings, improve error logging)
 
 Signed-off-by: Jessica Yu <jeyu@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAl40TvwQHGpleXVAa2Vy
 bmVsLm9yZwAKCRDARX44zjvBcigxD/4/ksGeXvf3tcsRc5M5S33Tws25vcHeByz/
 WEX1f7ZnXukCApFdnpUbVkjiH7EM0+T6lGumv4NPJht+ggP8JoY9hMkBqMmd0js/
 +R9U6o0vB4LW8zU68RwE0TS4qphpmpJz16HlhTPtIk4Vo0GBxnEYMMMcVWIeqq1W
 m3KcEUudv9/Y7IFawDNRJcUWI1jD2vcfaavbU6XbTw82ARiiScZFrWYzf1PGYJ6L
 XvJNwCVh8TDbS4C5kaNWp2LiGXegjKClosdisCIjkQr/3e+Rg1jOGHpa6B2+Vow2
 ttq6lmcikNpcCkCV1tFz+ex2LLsLBMAO939c2C0LIhnnIxVgSkDU0pWn3psAxiOl
 lRqHtQN42dRlOtBwZ9JoKTT9Wi3H/Lx0FCxg5OdblrSlOqH+GxQjBLkgtvmn/ZAh
 /dReehUoqbL55GieZuPPyostg3upCDE27IQZdFrZLWbE0VGiIyU9p6GYo7Tssuo2
 Tr8kmhYUF9o1AnlzVQgGgZF73PpM6vhmEnn/dipZrgFI//2A3xkAfi5JdhGLKsFi
 UsaeTX3q/AmnC8dqaNayiftSgaK/4hdSboW1hgWLLD98H608s7Bl1reTmXPxSyWj
 RvBVP0vp5+u9EItfkAG6jbEpM5ZtyFDUc+5KNfJhym6vaplp5H+krIrT2Li+oLUu
 d/eifJ/1vA==
 =boqg
 -----END PGP SIGNATURE-----

Merge tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux

Pull module updates from Jessica Yu:
 "Summary of modules changes for the 5.6 merge window:

   - Add "MS" (SHF_MERGE|SHF_STRINGS) section flags to __ksymtab_strings
     to indicate to the linker that it can perform string deduplication
     (i.e., duplicate strings are reduced to a single copy in the string
     table). This means any repeated namespace string would be merged to
     just one entry in __ksymtab_strings.

   - Various code cleanups and small fixes (fix small memleak in error
     path, improve moduleparam docs, silence rcu warnings, improve error
     logging)"

* tag 'modules-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
  module.h: Annotate mod_kallsyms with __rcu
  module: avoid setting info->name early in case we can fall back to info->mod->name
  modsign: print module name along with error message
  kernel/module: Fix memleak in module_add_modinfo_attrs()
  export.h: reduce __ksymtab_strings string duplication by using "MS" section flags
  moduleparam: fix kerneldoc
  modules: lockdep: Suppress suspicious RCU usage warning
2020-01-31 11:42:13 -08:00
Dmitry Vyukov 43e76af85f kcov: ignore fault-inject and stacktrace
Don't instrument 3 more files that contain debugging facilities and
produce large amounts of uninteresting coverage for every syscall.

The following snippets are sprinkled all over the place in kcov traces
in a debugging kernel.  We already try to disable instrumentation of
stack unwinding code and of most debug facilities.  I guess we did not
use fault-inject.c at the time, and stacktrace.c was somehow missed (or
something has changed in kernel/configs).  This change both speeds up
kcov (kernel doesn't need to store these PCs, user-space doesn't need to
process them) and frees trace buffer capacity for more useful coverage.

  should_fail
  lib/fault-inject.c:149
  fail_dump
  lib/fault-inject.c:45

  stack_trace_save
  kernel/stacktrace.c:124
  stack_trace_consume_entry
  kernel/stacktrace.c:86
  stack_trace_consume_entry
  kernel/stacktrace.c:89
  ... a hundred frames skipped ...
  stack_trace_consume_entry
  kernel/stacktrace.c:93
  stack_trace_consume_entry
  kernel/stacktrace.c:86

Link: http://lkml.kernel.org/r/20200116111449.217744-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 10:30:41 -08:00
Tom Zanussi d380dcde9a tracing: Fix now invalid var_ref_vals assumption in trace action
The patch 'tracing: Fix histogram code when expression has same var as
value' added code to return an existing variable reference when
creating a new variable reference, which resulted in var_ref_vals
slots being reused instead of being duplicated.

The implementation of the trace action assumes that the end of the
var_ref_vals array starting at action_data.var_ref_idx corresponds to
the values that will be assigned to the trace params. The patch
mentioned above invalidates that assumption, which means that each
param needs to explicitly specify its index into var_ref_vals.

This fix changes action_data.var_ref_idx to an array of var ref
indexes to account for that.

Link: https://lore.kernel.org/r/1580335695.6220.8.camel@kernel.org

Fixes: 8bcebc77e8 ("tracing: Fix histogram code when expression has same var as value")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-31 12:59:26 -05:00
Tom Zanussi fdeb1aca28 tracing: Change trace_boot to use synth_event interface
Have trace_boot_add_synth_event() use the synth_event interface.

Also, rename synth_event_run_cmd() to synth_event_run_command() now
that trace_boot's version is gone.

Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.org

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-31 12:59:26 -05:00
Andy Shevchenko dc2c733e65 kdb: Use for_each_console() helper
Replace open coded single-linked list iteration loop with for_each_console()
helper in use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:34:54 +00:00
Colin Ian King a4f8a7fb19 kdb: remove redundant assignment to pointer bp
The point bp is assigned a value that is never read, it is being
re-assigned later to bp = &kdb_breakpoints[lowbp] in a for-loop.
Remove the redundant assignment.

Addresses-Coverity ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191128130753.181246-1-colin.king@canonical.com
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:34:06 +00:00
Douglas Anderson bbfceba15f kdb: Get rid of confusing diag msg from "rd" if current task has no regs
If you switch to a sleeping task with the "pid" command and then type
"rd", kdb tells you this:

  No current kdb registers.  You may need to select another task
  diag: -17: Invalid register name

The first message makes sense, but not the second.  Fix it by just
returning 0 after commands accessing the current registers finish if
we've already printed the "No current kdb registers" error.

While fixing kdb_rd(), change the function to use "if" rather than
"ifdef".  It cleans the function up a bit and any modern compiler will
have no trouble handling still producing good code.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111624.5.I121f4c6f0c19266200bf6ef003de78841e5bfc3d@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:34:03 +00:00
Douglas Anderson 9441d5f6b7 kdb: Gid rid of implicit setting of the current task / regs
Some (but not all?) of the kdb backtrace paths would cause the
kdb_current_task and kdb_current_regs to remain changed.  As discussed
in a review of a previous patch [1], this doesn't seem intuitive, so
let's fix that.

...but, it turns out that there's actually no longer any reason to set
the current task / current regs while backtracing anymore anyway.  As
of commit 2277b49258 ("kdb: Fix stack crawling on 'running' CPUs
that aren't the master") if we're backtracing on a task running on a
CPU we ask that CPU to do the backtrace itself.  Linux can do that
without anything fancy.  If we're doing backtrace on a sleeping task
we can also do that fine without updating globals.  So this patch
mostly just turns into deleting a bunch of code.

[1] https://lore.kernel.org/r/20191010150735.dhrj3pbjgmjrdpwr@holly.lan

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111624.4.Ibc3d982bbeb9e46872d43973ba808cd4c79537c7@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:34:00 +00:00
Douglas Anderson a8649fb0a8 kdb: kdb_current_task shouldn't be exported
The kdb_current_task variable has been declared in
"kernel/debug/kdb/kdb_private.h" since 2010 when kdb was added to the
mainline kernel.  This is not a public header.  There should be no
reason that kdb_current_task should be exported and there are no
in-kernel users that need it.  Remove the export.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111623.3.I14b22b5eb15ca8f3812ab33e96621231304dc1f7@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:33:57 +00:00
Douglas Anderson c67c10a67f kdb: kdb_current_regs should be private
As of the patch ("MIPS: kdb: Remove old workaround for backtracing on
other CPUs") there is no reason for kdb_current_regs to be in the
public "kdb.h".  Let's move it next to kdb_current_task.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20191109111623.2.Iadbfb484e90b557cc4b5ac9890bfca732cd99d77@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
2020-01-31 17:33:54 +00:00
Steven Rostedt (VMware) 1e837945a8 tracing: Move tracing selftests to bottom of menu
Move all the tracing selftest configs to the bottom of the tracing menu.
There's no reason for them to be interspersed throughout.

Also, move the bootconfig menu to the top.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-30 09:46:29 -05:00