Commit Graph

46 Commits

Author SHA1 Message Date
Linus Torvalds e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Mark Brown 92d07a8ff6 Merge remote-tracking branches 'regulator/topic/max77686', 'regulator/topic/max77693', 'regulator/topic/max77802', 'regulator/topic/power-off' and 'regulator/topic/rk808' into regulator-next 2014-12-05 11:14:37 +00:00
Javier Martinez Canillas 072e78b12b regulator: of: Add regulator desc param to of_get_regulator_init_data()
The of_get_regulator_init_data() function is used to extract the regulator
init_data but information on how to extract certain data is defined in the
static regulator descriptor (e.g: how to map the hardware operating modes).

Add a const struct regulator_desc * parameter to the function signature so
the parsing logic could use the information in the struct regulator_desc.

of_get_regulator_init_data() relies on of_get_regulation_constraints() to
actually extract the init_data so it has to pass the struct regulator_desc
but that is modified on a later patch.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-26 18:58:14 +00:00
Richard Fitzgerald 9f946099fe regulator: gpio: fix parsing of gpio list
The list of gpios is defined as optional but the code was
failing to properly handle the case of no gpios, and also
failing to check for errors reading the entry from the
devicetree.

This patch fixes the handling of optional gpios - this is a
useful feature enabling the gpio-regulator to be used as a
dummy variable voltage regulator without having to assign any
real GPIO lines.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-21 19:25:35 +00:00
Markus Pargmann 2454f8d15c regulator: gpio: Use gpio_is_valid
Use gpio_is_valid instead of an explicit comparison with 0.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07 11:30:25 +00:00
Markus Pargmann 1de3821ace regulator: Set ena_gpio_initialized in regulator drivers
This patch sets ena_gpio_initialized for all drivers which set a
ena_gpio from parsed DT properties. Drivers using pdata may get zero
initialized pdata and therefore copy a 0 into the regulator_config
ena_gpio field.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-07 11:30:25 +00:00
Wolfram Sang 6c794b2654 regulator: drop owner assignment from platform_drivers
A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-20 16:21:29 +02:00
Heiko Stuebner 1f5a9623eb regulator: gpio-regulator: fix forgotten gpios-states reading
Commit 934624d6e9 ("regulator: gpio-regulator: do not open-code counting
and access of dt array elements") forgot to convert the recently added
gpios-states property using the same pattern.

Convert this instance to use the of-helpers too, resolving the build error.

Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-14 14:58:57 +00:00
Heiko Stuebner 934624d6e9 regulator: gpio-regulator: do not open-code counting and access of dt array elements
Open coding the counting of elements in a dt-property is abstracted by the newly
introduced of_property_count_uXX_elems functions. Additionally the raw iteration
over the states element exposes the endian conversion and dtb-format details,
which according to Mark Rutland "would be nice to limit [...] to of_ helper
functions".

Thus change gpio-regulator to use the helper for element counting and
of_property_read_u32_index for retrieval of individual values.

This makes it possible to remove the raw access to the states property entirely.

Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 15:50:40 +00:00
Kuninori Morimoto 5676ddc5c6 regulator: gpio: print warning if gpios <-> gpios-states mismatch on DT
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12 12:01:14 +00:00
Kuninori Morimoto 0094050d78 regulator: gpio: add gpios-status for DT
config->gpios[x].flags indicates initial pin status,
and it will be used for drvdata->state
on gpio_regulator_probe().
But, current of_get_gpio_regulator_config() doesn't care
about this flags.
This patch adds new gpios-status property in order to
care about initial pin status.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-04 18:36:48 +00:00
Fabio Estevam 9c25960cbb regulator: gpio-regulator: Remove unneeded OOM error message
There is no need to print an OOM message after devm_kzalloc, since there is
a generic OOM message in place.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03 12:30:21 +00:00
Mark Brown a2a2be6309 Merge remote-tracking branches 'regulator/topic/db8500', 'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus 2014-01-23 12:01:27 +00:00
Mark Brown 9eb9d3150b regulator: gpio: Warn if an invalid regulator-type is supplied
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-06 12:15:33 +00:00
Mark Brown 5b1ada83ba regulator: gpio: Don't require a regulator-type property
Since essentially all GPIO controlled regulators are voltage regulators
make the regulator-type property optional, defaulting to voltage.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-05 11:34:53 +00:00
Mark Brown 3981560c2a Merge remote-tracking branch 'regulator/fix/gpio' into regulator-linus 2013-11-24 14:02:48 +00:00
Laurent Pinchart 251b9c21d2 regulator: gpio-regulator: Don't oops on missing regulator-type property
Catch missing regulator-type property in DT and return an error
gracefully instead of deferencing a NULL pointer and crashing.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-09 15:06:22 +00:00
Sachin Kamat 6653efb75d regulator: gpio: Remove redundant break
'break' after goto has no effect. Remove it.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-04 11:50:10 +01:00
Jingoo Han dff91d0b72 regulator: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 12:24:20 +01:00
Axel Lin a451405fcd regulator: gpio-regulator: Staticize of_get_gpio_regulator_config()
of_get_gpio_regulator_config() is only used in gpio-regulator.c, make it static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 00:44:17 +08:00
Axel Lin 655efa0ff2 regulator: gpio-regulator: Use of_gpio_count()
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-01-29 00:44:17 +08:00
Greg Kroah-Hartman 3d68dfe324 Drivers: regulator: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Mark Brown bfd9155ebb Merge remote-tracking branch 'regulator/topic/gpio' into regulator-next 2012-12-10 23:14:11 +09:00
Lee Jones 3708903ee6 regulator: gpio-regulator: gpio_set_value should use cansleep
If it's possible for gpio_set_value to sleep, we should be using
the *_cansleep call instead. This patch fixes multiple warnings
from gpiolib.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 23:12:41 +09:00
Lee Jones ad0b8b9e82 regulator: gpio-regulator: Fix logical error in for() loop
The cond-statement of this particular for() loop will always be
true as long as at least one voltage-shifting GPIO is present.
If it wasn't for the break below, we'd be stuck in a forever loop.
This patch inserts the correct cond-statement into the statement.

Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-10 23:12:41 +09:00
Mark Brown 1f9cc5f771 Merge remote-tracking branch 'regulator/topic/hotplug' into regulator-next 2012-12-10 12:42:55 +09:00
Axel Lin ec4f7b88b4 regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
Use of_match_ptr and add ifdef CONFIG_OF guard for regulator_gpio_of_match.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-06 15:22:52 +09:00
Bill Pemberton 8dc995f56e regulator: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:53:38 +09:00
Bill Pemberton a5023574d1 regulator: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:31:26 +09:00
Bill Pemberton 5eb9f2b963 regulator: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-20 10:31:19 +09:00
Lee Jones 216f2b9c95 regulator: gpio-regulator: Catch 'no states property' misuse
A selection of voltage or current values (AKA states) should always
be specified when using a GPIO regulator. If there are no switchable
states then the fixed regulators should be used instead.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-14 20:58:09 +09:00
Frank Li f8a9f757cb regulator: gpio-regulator: fix can't find regulator node in dt
Need initilize of_node in regulator config when register regulator,
otherwise regulator driver think it is no-dt device.

in regulator_dev_lookup
list_for_each_entry(r, &regulator_list, list)
	if (r->dev.parent &&
		node == r->dev.of_node)
			return r

r->dev.of_noe will be zero if miss config in cfg.

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-11-13 16:35:57 +09:00
Lee Jones 006694d099 regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT
Here we provide the GPIO Regulator driver with Device Tree capability, so
that when a platform is booting with DT instead of platform data we can
still make full use of it.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-10-17 22:27:55 +09:00
Heiko Stübner eb0c5686b3 regulator: gpio-regulator: Split setting of voltages and currents
Originally gpio-regulator used the first item of its state list
that matched the given voltage or current range.

Commit 4dbd8f63f0 (regulator: gpio-regulator: Set the smallest voltage/current
in the specified range) changed this, to make the selection independent of
the ordering of the state list.

But selecting the minimal value is only true for voltage regulators.
For current regulators the maximum in the given range should be
selected instead.

Therefore split the previous common selection function into specific
functions for voltage and current regulators.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-08-08 12:16:06 +01:00
Axel Lin 4b7c948f55 regulator: gpio-regulator: Use core GPIO enable support
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:38:36 +01:00
Axel Lin a2a8222be8 regulator: gpio-regulator: Set enable enable_time in regulator_desc
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-07-04 12:38:35 +01:00
Heiko Stübner b0e4d7bf8b regulator: gpio-regulator: populate selector from set_voltage
This was missing until now and the underlying
_regulator_do_set_voltage is using this value when calling list_voltage.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04 10:44:30 +01:00
Heiko Stübner 00926369b7 regulator: gpio-regulator: Fix finding of smallest value
Commit 4dbd8f63f0 (regulator: gpio-regulator: Set the smallest
voltage/current in the specified range) forgot to set the newly
introduced best_val.

Therefore it stayed always at INT_MAX thus breaking the setting
of the voltage.

Included is also an init value for target, as warnings about
a possibly uninitialised target started appearing with this fix.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04 10:44:24 +01:00
Heiko Stübner 7d4be2f5ad regulator: gpio-regulator: do not pass drvdata pointer as reference
Commit c172708d38 (regulator: core: Use a struct to pass in
regulator runtime configuration) added the drvdata pointer
only per reference to the new config array in the gpio-regulator.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04 10:44:18 +01:00
Axel Lin 6c9eeb0f5c regulator: Remove unneeded include of linux/delay.h from regulator drivers
All the drivers that need delay for the regulator voltage output voltage to
stabilize after being enabled or after being set to a new value has been
converted to implement enable_time and set_voltage_time_sel callbacks.
Then regulator core will take care of the necessary delay.

For the drivers that don't need the delay, don't need to include linux/delay.h.
This patch removes the unneeded include of linux/delay.h in regulator drivers.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-23 13:20:26 +01:00
Mark Brown c172708d38 regulator: core: Use a struct to pass in regulator runtime configuration
Rather than adding new arguments to regulator_register() every time we
want to add a new bit of dynamic information at runtime change the function
to take these via a struct. By doing this we avoid needing to do further
changes like the recent addition of device tree support which required each
regulator driver to be updated to take an additional parameter.

The regulator_desc which should (mostly) be static data is still passed
separately as most drivers are able to configure this statically at build
time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:37:09 +01:00
Mark Brown 02b552160f regulator: gpio-regulator: Basic devm_kzalloc() conversion
There's some other allocations but they're not so trivial as they use
kmemdup() and kstrdup().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04 11:38:52 +01:00
Axel Lin 4dbd8f63f0 regulator: gpio-regulator: Set the smallest voltage/current in the specified range
Do not assume the gpio regulator states map is sorted in any order.
This patch ensures we always set the smallest voltage/current that falls within
the specified range.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-01 11:59:26 +01:00
Rajendra Nayak 156843470c regulator: Fix compile break due to missing arguments to regulator_register
The commit 2c043bcbf2 ("regulator: pass additional of_node to
regulator_register()") caused a compile break because it missed
updating the regulator_register() call in gpio-regulator.c with
the additional parameter (NULL).

The compile break as reported by Stephen Rothwell with the
x86_64 allmodconfig looked like this

drivers/regulator/gpio-regulator.c: In function 'gpio_regulator_probe':
drivers/regulator/gpio-regulator.c:287:8: error: too few arguments to function 'regulator_register'
include/linux/regulator/driver.h:215:23: note: declared here

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-24 10:47:56 +00:00
Mark Brown ecc37edf7b regulator: Add module.h include to gpio-regulator
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11 13:59:13 +01:00
Heiko Stübner 3f0292ae8b regulator: Add driver for gpio-controlled regulators
This patch adds support for regulators that can be controlled via gpios.

Examples for such regulators are the TI-tps65024x voltage regulators
with 4 fixed and 1 runtime-switchable voltage regulators
or the TI-bq240XX charger regulators.

The number of controlling gpios is not limited, the mapping between
voltage/current and target gpio state is done via the states map
and the driver can be used for either voltage or current regulators.

A mapping for a regulator with two GPIOs could look like:

gpios = {
	{ .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" },
	{ .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW,  .label = "gpio name 2" },
}

The flags element of the gpios array determines the initial state of
the gpio, set during probe. The initial state of the regulator is also
calculated from these values

states = {
	{ .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) },
	{ .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) },
	{ .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) },
	{ .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) },
}

The target-state for the n-th gpio is determined by the n-th bit
in the bitfield of the target-value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09 12:36:21 +01:00