Commit Graph

17 Commits

Author SHA1 Message Date
Michal Simek 69717607f0 microblaze: Report if only one timer is used
Kernel needs two timers because of clocksource and clockevent.
It is better to show warning message directly on early
console if available. If it isn't available kernel log buffer
contains it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21 15:51:30 +10:00
Grant Likely eca3930163 of: Merge of_platform_bus_type with platform_bus_type
of_platform_bus was being used in the same manner as the platform_bus.
The only difference being that of_platform_bus devices are generated
from data in the device tree, and platform_bus devices are usually
statically allocated in platform code.  Having them separate causes
the problem of device drivers having to be registered twice if it
was possible for the same device to appear on either bus.

This patch removes of_platform_bus_type and registers all of_platform
bus devices and drivers on the platform bus instead.  A previous patch
made the of_device structure an alias for the platform_device structure,
and a shim is used to adapt of_platform_drivers to the platform bus.

After all of of_platform_bus drivers are converted to be normal platform
drivers, the shim code can be removed.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:57:51 -06:00
Michal Simek 6059b3cbeb microblaze: Print early printk information to log buffer
If early printk console is not enabled then all messages
are written to log buffer.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-04-01 08:38:25 +02:00
Michal Simek 407c1da07d microblaze: Move cache function to cache.c
It is better to have init cache handling on one place.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:07:57 +01:00
Michal Simek 733cc21831 microblaze: Add support for Xilinx PCI host bridge
This patch is based on powerpc patch
64f1650247

We did some cleanups and removed powerpc parts.
There is one new debug early listing function too.

Exclude function is only in Debug options.

We tested in on custom board.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 14:05:18 +01:00
Michal Simek ccfe27d700 microblaze: Support DMA
Add DMA support for Microblaze. There are some part of this new feature:
1. Basic DMA support
2. Enable DMA debug option
3. Setup notifier

Ad 1. dma-mapping come from powerpc and x86 version and it is based on
generic dma-mapping-common.h

Ad 2. DMA support debug features which is used in generic file.
For more information please look at Documentation/DMA-API.txt

Ad 3. notifier is very important to setup dma_ops. Without this part
for example ll_temac driver failed because there are no setup dma operations.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-11 13:56:29 +01:00
Michal Simek a601341111 microblaze: Invalidate dcache before enabling it
We found that on write-trough kernel is necessary to do that invalidation.
One WB is possible to use invalidation too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-02-08 11:39:18 +01:00
Michal Simek 2ee2ff875a microblaze: Support for WB cache
Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:10 +01:00
Michal Simek 5de2344630 microblaze: Remove panic_timeout init value
panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:45:09 +01:00
Michal Simek bf2d809668 microblaze: Lockdep support
Microblaze needs to do lock_init very soon because MMU init calls lock functions.

Here is the explanation from Peter Zijlstra why we have to enable
__ARCH_WANTS_INTERRUPTS_ON_CTSW.

"So we schedule while holding rq->lock (for obvious reasons), but since
lockdep tracks held locks per tasks, we need to transfer the held state
from the prev to the next task. We do this by explicity calling
spin_release(&rq->lock) in context_switch() right before switch_to(),
and calling spin_acquire(&rq->lock) in
finish_task_switch()->finish_lock_switch().

Now, for some reason lockdep thinks that interrupts got enabled over the
context switch (git grep __ARCH_WANTS_INTERRUPTS_ON_CTSW arch/microblaze
doesn't seem to turn up anything).

Clearly trying to acquire the rq->lock with interrupts enabled is a bad
idea and lockdep warns you about this."

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:40:09 +01:00
Michal Simek 42a2478b78 microblaze: GPIO reset support
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14 08:40:08 +01:00
Michal Simek 2622434ee0 microblaze: Add checking mechanism for MSR instruction
It was necessary to use fourth parameter(r8) in early_printk
to show messages on console.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-21 14:29:21 +02:00
Michal Simek 74510f2a27 microblaze: Add messages about FDT blob
Print accurate message about place where FDT blob is.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27 07:39:53 +02:00
John Williams 909964ec89 microblaze: Final support for statically linked DTB
If r7 is zero at kernel boot, or does not point to a valid DTB, then
we fall back to a DTB (assumed to be) linked statically in the kernel, instead
of blindly copying bogus cruft into the kernel DTB memory region

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27 07:39:53 +02:00
Michal Simek cda1fd5a60 microblaze: Cleanup compiled-in rootfs in BSS section
This patch is based on patch from Steve Magnani.

There were bug for compiled-in rootfs. We have to move
moving rootfs which is in BSS section to _ebss section
which is at the end of kernel and then clear bss section
not vice-versa.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21 16:39:16 +02:00
Michal Simek 1dff89a9c7 microblaze: Fix early cmdline for CMDLINE_FORCE
This patch fixed parsing early parameters because
current implementation does that early parse DTS
command line and then parse CMDLINE line which is compiled-in.

For case that DTS doesn't contain command line is
copied command line from kernel with is done in prom.c
that's why I can remove it from machine_early_init.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-21 16:39:05 +02:00
Michal Simek ec9f910184 microblaze_v8: setup.c, setup.h - system setting
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27 14:25:24 +01:00