Replace a comma between expression statements by a semicolon. This changes
the semantics of the code, but given the current indentation appears to be
what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:
// <smpl>
@r@
expression e1,e2;
@@
e1
-,
+;
e2;
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Open stateids must be initialized with the st_access_bmap and
st_deny_bmap set to 0, so that nfs4_get_vfs_file can properly record
their state in old_access_bmap and old_deny_bmap.
This bug was introduced in commit baeb4ff0e5 (nfsd: make deny mode
enforcement more efficient and close races in it) and was causing the
refcounts to end up incorrect when nfs4_get_vfs_file returned an error
after bumping the refcounts. This made it impossible to unmount the
underlying filesystem after running pynfs tests that involve deny modes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 "nfsd4: don't try to encode conflicting owner if low
on space" forgot to free conf->data in nfsd4_encode_lockt and before
sign conf->data to NULL in nfsd4_encode_lock_denied, causing a leak.
Worse, kfree() can be called on an uninitialized pointer in the case of
a succesful lock (or one that fails for a reason other than a conflict).
(Note that lock->lk_denied.ld_owner.data appears it should be zero here,
until you notice that it's one arm of a union the other arm of which is
written to in the succesful case by the
memcpy(&lock->lk_resp_stateid, &lock_stp->st_stid.sc_stateid,
sizeof(stateid_t));
in nfsd4_lock(). In the 32-bit case this overwrites ld_owner.data.)
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 8c7424cff6 ""nfsd4: don't try to encode conflicting owner if low on space"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's a potential race between a lease break and DELEGRETURN call.
Suppose a lease break comes in and queues the workqueue job for a
delegation, but it doesn't run just yet. Then, a DELEGRETURN comes in
finds the delegation and calls destroy_delegation on it to unhash it and
put its primary reference.
Next, the workqueue job runs and queues the delegation back onto the
del_recall_lru list, issues the CB_RECALL and puts the final reference.
With that, the final reference to the delegation is put, but it's still
on the LRU list.
When we go to unhash a delegation, it's because we intend to get rid of
it soon afterward, so we don't want lease breaks to mess with it once
that occurs. Fix this by bumping the dl_time whenever we unhash a
delegation, to ensure that lease breaks don't monkey with it.
I believe this is a regression due to commit 02e1215f9f (nfsd: Avoid
taking state_lock while holding inode lock in nfsd_break_one_deleg).
Prior to that, the state_lock was held in the lm_break callback itself,
and that would have prevented this race.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We will want to add reference counting to the lock stateid and open
stateids too in later patches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfs4_setlease succesfully acquires a new delegation, then another
task breaks the delegation before we reach hash_delegation_locked, then
the breaking task will see an empty fi_delegations list and do nothing.
The client will receive an open reply incorrectly granting a delegation
and will never receive a recall.
Move more of the delegation fields to be protected by the fi_lock. It's
more granular than the state_lock and in later patches we'll want to
be able to rely on it in addition to the state_lock.
Attempt to acquire a delegation. If that succeeds, take the spinlocks
and then check to see if the file has had a conflict show up since then.
If it has, then we assume that the lease is no longer valid and that
we shouldn't hand out a delegation.
There's also one more potential (but very unlikely) problem. If the
lease is broken before the delegation is hashed, then it could leak.
In the event that the fi_delegations list is empty, reset the
fl_break_time to jiffies so that it's cleaned up ASAP by
the normal lease handling code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_probe_callback kicks off some work that will eventually run
nfsd4_process_cb_update and update the session flags. In theory we
could process a following SEQUENCE call before that update happens
resulting in flags that don't accurately represent, for example, the
lack of a backchannel.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.
Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.
Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The first 8 ops of the compound are zeroed since they're a part of the
argument that's zeroed by the
memset(rqstp->rq_argp, 0, procp->pc_argsize);
in svc_process_common(). But we handle larger compounds by allocating
the memory on the fly in nfsd4_decode_compound(). Other than code
recently fixed by 01529e3f81 "NFSD: Fix memory leak in encoding denied
lock", I don't know of any examples of code depending on this
initialization. But it definitely seems possible, and I'd rather be
safe.
Compounds this long are unusual so I'm much more worried about failure
in this poorly tested cases than about an insignificant performance hit.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
fs/nfsd/auth.c:31:38: warning: incorrect type in argument 1 (different address spaces)
fs/nfsd/auth.c:31:38: expected struct cred const *cred
fs/nfsd/auth.c:31:38: got struct cred const [noderef] <asn:4>*real_cred
Add a new accessor for the ->real_cred and use that to fetch the
pointer. Accessing current->real_cred directly is actually quite safe
since we know that they can't go away so this is mostly a cosmetic fixup
to silence sparse.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an extra delegation state to allow the stateid to remain in the idr
tree until the last reference has been released. This will be necessary
to ensure uniqueness once the client_mutex is removed.
[jlayton: reset the sc_type under the state_lock in unhash_delegation]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass the delegation pointer in here as it's only used to get
the nfs4_file pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
state_lock is a heavily contended global lock. We don't want to grab
that while simultaneously holding the inode->i_lock.
Add a new per-nfs4_file lock that we can use to protect the
per-nfs4_file delegation list. Hold that while walking the list in the
break_deleg callback and queue the workqueue job for each one.
The workqueue job can then take the state_lock and do the list
manipulations without the i_lock being held prior to starting the
rpc call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just an obfuscated INIT_WORK call. Just make the work_func_t a
non-static symbol and use a normal INIT_WORK call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note that the caller has already reserved space for count and eof, so
xdr->p has already moved past them, only the padding remains.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes dc97618ddd (nfsd4: separate splice and readv cases)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 4ac7249ea5 (nfsd: use get_acl and ->set_acl)
don't check the acl returned from get_acl()/posix_acl_from_mode().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename it to better describe what it does, and have it just return the
stateid instead of a __be32 (which is now always nfs_ok). Also, do the
search for an existing stateid after the delegation check, to reduce
cleanup if the delegation check returns error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current enforcement of deny modes is both inefficient and scattered
across several places, which makes it hard to guarantee atomicity. The
inefficiency is a problem now, and the lack of atomicity will mean races
once the client_mutex is removed.
First, we address the inefficiency. We have to track deny modes on a
per-stateid basis to ensure that open downgrades are sane, but when the
server goes to enforce them it has to walk the entire list of stateids
and check against each one.
Instead of doing that, maintain a per-nfs4_file deny mode. When a file
is opened, we simply set any deny bits in that mode that were specified
in the OPEN call. We can then use that unified deny mode to do a simple
check to see whether there are any conflicts without needing to walk the
entire stateid list.
The only time we'll need to walk the entire list of stateids is when a
stateid that has a deny mode on it is being released, or one is having
its deny mode downgraded. In that case, we must walk the entire list and
recalculate the fi_share_deny field. Since deny modes are pretty rare
today, this should be very rare under normal workloads.
To address the potential for races once the client_mutex is removed,
protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to
make sure that any deny mode we want to apply won't conflict with
existing access. If that's ok, then have nfs4_file_get_access check that
new access to the file won't conflict with existing deny modes.
If that also passes, then get file access references, set the correct
access and deny bits in the stateid, and update the fi_share_deny field.
If opening the file or truncating it fails, then unwind the whole mess
and return the appropriate error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, there's an unlikely but possible race
that could occur. It will be possible for nfs4_file_put_access to race
with nfs4_file_get_access. The refcount will go to zero (briefly) and
then bumped back to one. If that happens we set ourselves up for a
use-after-free and the potential for a lock to race onto the i_flock
list as a filp is being torn down.
Ensure that we can safely bump the refcount on the file by holding the
fi_lock whenever that's done. The only place it currently isn't is in
get_lock_access.
In order to ensure atomicity with finding the file, use the
find_*_file_locked variants and then call get_lock_access to get new
access references on the nfs4_file under the same lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix the "deny" argument type, and start the loop at 1. The 0 iteration
is always a noop.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cleanup -- ensure that the stateid bits are set at the same time that
the file access refcounts are incremented. Keeping them coherent like
this makes it easier to ensure that we account for all of the
references.
Since the initialization of the st_*_bmap fields is done when it's
hashed, we go ahead and hash the stateid before getting access to the
file and unhash it if that function returns error. This will be
necessary anyway in a follow-on patch that will overhaul deny mode
handling.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We never use anything above bit #3, so an unsigned long for each is
wasteful. Shrink them to a char each, and add some WARN_ON_ONCE calls if
we try to set or clear bits that would go outside those sizes.
Note too that because atomic bitops work on unsigned longs, we have to
abandon their use here. That shouldn't be a problem though since we
don't really care about the atomicity in this code anyway. Using them
was just a convenient way to flip bits.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and replace it with a simple swap call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have them take NFS4_SHARE_ACCESS_* flags instead of an open mode. This
spares the callers from having to convert it themselves.
This also allows us to simplify these functions as we no longer need
to do the access_to_omode conversion in either one.
Note too that this patch eliminates the WARN_ON in
__nfs4_file_get_access. It's valid for now, but in a later patch we'll
be bumping the refcounts prior to opening the file in order to close
some races, at which point we'll need to remove it anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use filp_close instead of open coding. filp_close does a bit more than
just release the locks and put the filp. It also calls ->flush and
dnotify_flush, both of which should be done here anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to take the lock unless the count goes to 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce says:
There's also a preexisting expire_client/laundromat vs break race:
- expire_client/laundromat adds a delegation to its local
reaplist using the same dl_recall_lru field that a delegation
uses to track its position on the recall lru and drops the
state lock.
- a concurrent break_lease adds the delegation to the lru.
- expire/client/laundromat then walks it reaplist and sees the
lru head as just another delegation on the list....
Fix this race by checking the dl_time under the state_lock. If we find
that it's not 0, then we know that it has already been queued to the LRU
list and that we shouldn't queue it again.
In the case of destroy_client, we must also ensure that we don't hit
similar races by ensuring that we don't move any delegations to the
reaplist with a dl_time of 0. Just bump the dl_time by one before we
drop the state_lock. We're destroying the delegations anyway, so a 1s
difference there won't matter.
The fault injection code also requires a bit of surgery here:
First, in the case of nfsd_forget_client_delegations, we must prevent
the same sort of race vs. the delegation break callback. For that, we
just increment the dl_time to ensure that a delegation callback can't
race in while we're working on it.
We can't do that for nfsd_recall_client_delegations, as we need to have
it actually queue the delegation, and that won't happen if we increment
the dl_time. The state lock is held over that function, so we don't need
to worry about these sorts of races there.
There is one other potential bug nfsd_recall_client_delegations though.
Entries on the victims list are not dequeued before calling
nfsd_break_one_deleg. That's a potential list corruptor, so ensure that
we do that there.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 (nfsd4: don't try to encode conflicting owner if low on space)
forgot free conf->data in nfsd4_encode_lockt and before sign conf->data to NULL
in nfsd4_encode_lock_denied.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lookup_clientid is preferable to find_confirmed_client since it's able
to use the cached client in the compound state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we'll be moving the stateowner table into the
nfs4_client, and by doing this we ensure that we have a cached
nfs4_client pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and have alloc_init_open_stateowner just use the cstate->clp pointer
instead of passing in a clp separately. This allows us to use the
cached nfs4_client pointer in the cstate instead of having to look it
up again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to use the nfsd4_compound_state to cache the nfs4_client in
order to optimise away extra lookups of the clid.
In the v4.0 case, we use this to ensure that we only have to look up the
client at most once per compound for each call into lookup_clientid. For
v4.1+ we set the pointer in the cstate during SEQUENCE processing so we
should never need to do a search for it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I saw this pop up with some pynfs testing:
[ 123.609992] nfsd: non-standard errno: -7
...and -7 is -E2BIG. I think what happened is that XFS returned -E2BIG
due to some xattr operations with the ACL10 pynfs TEST (I guess it has
limited xattr size?).
Add a better mapping for that error since it's possible that we'll need
it. How about we convert it to NFSERR_FBIG? As Bruce points out, they
both have "BIG" in the name so it must be good.
Also, turn the printk in this function into a WARN() so that we can get
a bit more information about situations that don't have proper mappings.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 2a7420c03e504 (nfsd: Ensure that nfsd_create_setattr commits
files to stable storage), added a couple of calls to commit_metadata,
but doesn't convert their return codes to __be32 in the appropriate
places.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cstate already holds information about the session, and hence
the client id, so it makes more sense to pass that information
rather than the current practice of passing a 'minor version' number.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client were to disappear from underneath us while we're holding
a session reference, things would be bad. This cleanup helps ensure
that it cannot, which will be a possibility when the client_mutex is
removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we know that we won't have several lockowners with the same,
owner->data, we can simplify nfsd4_release_lockowner and get rid of
the lo_list in the process.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just like open-owners, lock-owners are associated with a name, a clientid
and, in the case of minor version 0, a sequence id. There is no association
to a file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A lockowner can have more than one lock stateid. For instance, if a
process has more than one file open and has locks on both, then the same
lockowner has more than one stateid associated with it. Change it so
that this reality is better reflected by the objects that nfsd uses.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup that should introduce no behavioral changes.
Currently this function just unhashes the stateid and leaves the caller
to do the work of the CLOSE processing.
Change nfsd4_close_open_stateid so that it handles doing all of the work
of closing a stateid. Move the handling of the unhashed stateid into it
instead of doing that work in nfsd4_close. This will help isolate some
coming changes to stateid handling from nfsd4_close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to confirm an openowner in v4.1 and above, so we can
go ahead and set NFS4_OO_CONFIRMED when we create openowners in
those versions. This will also be necessary when we remove the
client_mutex, as it'll be possible for two concurrent opens to race
in versions >4.0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Not technically a bugfix, since nothing tries to use the return pointer
if this function doesn't return success, but it could be a problem
with some coming changes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the maximum number of connections that nfsd will allow
is based on the number of threads spawned. While this is fine for a
default, there really isn't a clear relationship between the two.
The number of threads corresponds to the number of concurrent requests
that we want to allow the server to process at any given time. The
connection limit corresponds to the maximum number of clients that we
want to allow the server to handle. These are two entirely different
quantities.
Break the dependency on increasing threads in order to allow for more
connections, by adding a new per-net parameter that can be set to a
non-zero value. The default is still to base it on the number of threads,
so there should be no behavior change for anyone who doesn't use it.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since nfsd_create_setattr strips the mode from the struct iattr, it
is quite possible that it will optimise away the call to nfsd_setattr
altogether.
If this is the case, then we never call commit_metadata() on the
newly created file.
Also ensure that both nfsd_setattr() and nfsd_create_setattr() fail
when the call to commit_metadata fails.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit db2e747b14 (vfs: remove mode parameter from vfs_symlink())
have remove mode parameter from vfs_symlink.
So that, iattr isn't needed by nfsd_symlink now, just remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current code depends on the client_mutex to guarantee a single struct
nfs4_file per inode in the file_hashtbl and make addition atomic with
respect to lookup. Rely instead on the state_Lock, to make it easier to
stop taking the client_mutex here later.
To prevent an i_lock/state_lock inversion, change nfsd4_init_file to
use ihold instead if igrab. That's also more efficient anyway as we
definitely hold a reference to the inode at that point.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_process_open2 will currently will get access to the file, and then
call nfsd4_truncate to (possibly) truncate it. If that operation fails
though, then the access references will never be released as the
nfs4_ol_stateid is never initialized.
Fix by moving the nfsd4_truncate call into nfs4_get_vfs_file, ensuring
that the refcounts are properly put if the truncate fails.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fs/nfsd/nfs4xdr.c: In function 'nfsd4_encode_readv':
>> fs/nfsd/nfs4xdr.c:3137:148: warning: comparison of distinct pointer types lacks a cast [enabled by default]
thislen = min(len, ((void *)xdr->end - (void *)xdr->p));
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Avoid an extra allocation for the tmpbuf struct itself, and stop
ignoring some allocation failures.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a not-that-useful kmalloc wrapper. And I'd like one of the
callers to actually use something other than kmalloc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
28e05dd845 "knfsd: nfsd4: represent nfsv4 acl with array instead of
linked list" removed the last user that wanted a custom free function.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The name of a link is currently stored in cr_name and cr_namelen, and
the content in cr_linkname and cr_linklen. That's confusing.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently nfsd_symlink has a weird hack to serve callers who don't
null-terminate symlink data: it looks ahead at the next byte to see if
it's zero, and copies it to a new buffer to null-terminate if not.
That means callers don't have to null-terminate, but they *do* have to
ensure that the byte following the end of the data is theirs to read.
That's a bit subtle, and the NFSv4 code actually got this wrong.
So let's just throw out that code and let callers pass null-terminated
strings; we've already fixed them to do that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's simple enough for NFSv2 to null-terminate the symlink data.
A bit weird (it depends on knowing that we've already read the following
byte, which is either padding or part of the mode), but no worse than
the conditional kstrdup it otherwise relies on in nfsd_symlink().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Introduced by commit 561f0ed498 (nfsd4: allow large readdirs).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
XDR requires 4-byte alignment; nfs4d READLINK reply writes out the padding,
but truncates the packet to the padding-less size.
Fix by taking the padding into consideration when truncating the packet.
Symptoms:
# ll /mnt/
ls: cannot read symbolic link /mnt/test: Input/output error
total 4
-rw-r--r--. 1 root root 0 Jun 14 01:21 123456
lrwxrwxrwx. 1 root root 6 Jul 2 03:33 test
drwxr-xr-x. 1 root root 0 Jul 2 23:50 tmp
drwxr-xr-x. 1 root root 60 Jul 2 23:44 tree
Signed-off-by: Avi Kivity <avi@cloudius-systems.com>
Fixes: 476a7b1f4b (nfsd4: don't treat readlink like a zero-copy operation)
Reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently rpc_pton() fails to handle the case where you echo an address
into the file, as it barfs on the newline. Ensure that we NULL out the
first occurrence of any newline.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
AFAICT, the only way to hit this error is to pass this function a bogus
"who" value. In that case, we probably don't want to return -1 as that
could get sent back to the client. Turn this into nfserr_serverfault,
which is a more appropriate error for a server bug like this.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The filehandle structs all use host-endian values, but will sometimes
stuff big-endian values into those fields. This is OK since these
values are opaque to the client, but it confuses sparse. Add __force to
make it clear that we are doing this intentionally.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callers expect a __be32 return and the functions they call return
__be32, so having these return int is just wrong. Also, nfsd_finish_read
can be made static.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently hash the XID to determine a hash bucket to use for the
reply cache entry, which is fed into hash_32 without byte-swapping it.
Add __force to make sparse happy, and add some comments to explain
why.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse complains that we're stuffing non-byte-swapped values into
__be32's here. Since they're supposed to be opaque, it doesn't matter
much. Just add __force to make sparse happy.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't using cache_get besides export.h, using exp_get for export.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 561f0ed498 (nfsd4: allow large readdirs) introduces a bug
about readdir the root of pseudofs.
Call xdr_truncate_encode() revert encoded name when skipping.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd needs to recall a delegation for some reason it implies that there is
contention on the file, so further delegations should not be handed out.
The current code fails to do so, and the result is effectively a
live-lock under some workloads: a client attempting a conflicting
operation on a read-delegated file receives NFS4ERR_DELAY and retries
the operation, but by the time it retries the server may already have
given out another delegation.
We could simply avoid delegations for (say) 30 seconds after any recall, but
this is probably too heavy handed.
We could keep a list of inodes (or inode numbers or filehandles) for recalled
delegations, but that requires memory allocation and searching.
The approach taken here is to use a bloom filter to record the filehandles
which are currently blocked from delegation, and to accept the cost of a few
false positives.
We have 2 bloom filters, each of which is valid for 30 seconds. When a
delegation is recalled the filehandle is added to one filter and will remain
disabled for between 30 and 60 seconds.
We keep a count of the number of filehandles that have been added, so when
that count is zero we can bypass all other tests.
The bloom filters have 256 bits and 3 hash functions. This should allow a
couple of dozen blocked filehandles with minimal false positives. If many
more filehandles are all blocked at once, behaviour will degrade towards
rejecting all delegations for between 30 and 60 seconds, then resetting and
allowing new delegations.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
27b11428b7 ("nfsd4: remove lockowner when removing lock stateid")
introduced a memory leak.
Cc: stable@vger.kernel.org
Reported-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the DRC cache pruner will stop scanning the list when it
hits an entry that is RC_INPROG. It's possible however for a call to
take a *very* long time. In that case, we don't want it to block other
entries from being pruned if they are expired or we need to trim the
cache to get back under the limit.
Fix the DRC cache pruner to just ignore RC_INPROG entries.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
While we're here, let's kill off a couple of the read-side macros.
Leaving the more complicated ones alone for now.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpc code makes available to the NFS server an array of pages to
encod into. The server represents its reply as an xdr buf, with the
head pointing into the first page in that array, the pages ** array
starting just after that, and the tail (if any) sharing any leftover
space in the page used by the head.
While encoding, we use xdr_stream->page_ptr to keep track of which page
we're currently using.
Currently we set xdr_stream->page_ptr to buf->pages, which makes the
head a weird exception to the rule that page_ptr always points to the
page we're currently encoding into. So, instead set it to buf->pages -
1 (the page actually containing the head), and remove the need for a
little unintuitive logic in xdr_get_next_encode_buffer() and
xdr_truncate_encode.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't want the stateid to be found in the hash table before the delegation
is granted.
Currently this is protected by the client_mutex, but we want to break that
up and this is a necessary step toward that goal.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...as the name is a bit more descriptive and we've started using it for
other purposes.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The memset of resp in svc_process_common should ensure that these are
already zeroed by the time they get here.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFS4_OPEN_CLAIM_PREVIOUS case, we should only mark it confirmed
if the nfs4_check_open_reclaim check succeeds.
In the NFS4_OPEN_CLAIM_DELEG_PREV_FH and NFS4_OPEN_CLAIM_DELEGATE_PREV
cases, I see no point in declaring the openowner confirmed when the
operation is going to fail anyway, and doing so might allow the client
to game things such that it wouldn't need to confirm a subsequent open
with the same owner.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes a bug in the handling of the fi_delegations list.
nfs4_setlease does not hold the recall_lock when adding to it. The
client_mutex is held, which prevents against concurrent list changes,
but nfsd_break_deleg_cb does not hold while walking it. New delegations
could theoretically creep onto the list while we're walking it there.
Signed-off-by: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The laundromat uses two variables to calculate when it should next run,
but one is completely ignored at the end of the run. Merge the two and
rename the variable to be more descriptive of what it does.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
CHECK fs/nfsd/nfs4xdr.c
fs/nfsd/nfs4xdr.c:2043:1: warning: symbol 'nfsd4_encode_fattr' was not declared. Should it be static?
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note nobody's ever noticed because the typical client probably never
requests FILES_AVAIL without also requesting something else on the list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ex_nflavors can't be negative number, just defined by uint32_t.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a typedef wrapper for svc_export or svc_client, remove them.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 49b28684fd ("nfsd: Remove deprecated nfsctl system call and
related code") removed the only use of ipv6_addr_set_v4mapped(), so
net/ipv6.h is unneeded now.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8f6c5ffc89 ("kernel/groups.c: remove return value of
set_groups") removed the last use of "ret".
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 4c1e1b34d5 ("nfsd: Store ex_anon_uid and ex_anon_gid as
kuids and kgids") using kuid/kgid for ex_anon_uid/ex_anon_gid,
user_namespace.h is not needed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If fsloc_parse() failed at kzalloc(), fs/nfsd/export.c
411
412 fsloc->locations = kzalloc(fsloc->locations_count
413 * sizeof(struct nfsd4_fs_location), GFP_KERNEL);
414 if (!fsloc->locations)
415 return -ENOMEM;
svc_export_parse() will call nfsd4_fslocs_free() with fsloc->locations = NULL,
so that, "kfree(fsloc->locations[i].path);" will cause a crash.
If fsloc_parse() failed after that, fsloc_parse() will call nfsd4_fslocs_free(),
and svc_export_parse() will call it again, so that, a double free is caused.
This patch checks the fsloc->locations, and set to NULL after it be freed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
And switch a couple other functions from the encode(&p,...) convention
to the p = encode(p,...) convention mostly used elsewhere.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space. That's not a legal error in the 4.1 case.
And in the 4.1 case, if we ran out of buffer space, we should have
exceeded a session limit too.
(Note in 1bc49d83c3 "nfsd4: fix
nfs4err_resource in 4.1 case" we originally tried fixing this error
return before fixing the problem that we could error out while we still
had lots of available space. The result was to trade one illegal error
for another in those cases. We decided that was helpful, so reverted
the change in fc208d026b, and are only
reinstating it now that we've elimited almost all of those cases.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I'm not sure why a client would want to stuff multiple reads in a
single compound rpc, but it's legal for them to do it, and we should
really support it.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The splice and readv cases are actually quite different--for example the
former case ignores the array of vectors we build up for the latter.
It is probably clearer to separate the two cases entirely.
There's some code duplication between the split out encoders, but this
is only temporary and will be fixed by a later patch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently allow only one read per compound, with operations before
and after whose responses will require no more than about a page to
encode.
While we don't expect clients to violate those limits any time soon,
this limitation isn't really condoned by the spec, so to future proof
the server we should lift the limitation.
At the same time we'd like to continue to support zero-copy reads.
Supporting multiple zero-copy-reads per compound would require a new
data structure to replace struct xdr_buf, which can represent only one
set of included pages.
So for now we plan to modify encode_read() to support either zero-copy
or non-zero-copy reads, and use some heuristics at the start of the
compound processing to decide whether a zero-copy read will work.
This will allow us to support more exotic compounds without introducing
a performance regression in the normal case.
Later patches handle those "exotic compounds", this one just makes sure
zero-copy is turned off in those cases.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We plan to use this estimate to decide whether or not to allow zero-copy
reads. Currently we're assuming all getattr's are a page, which can be
both too small (ACLs e.g. may be arbitrarily long) and too large (after
an upcoming read patch this will unnecessarily prevent zero copy reads
in any read compound also containing a getattr).
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no advantage to this zero-copy-style readlink encoding, and it
unnecessarily limits the kinds of compounds we can handle. (In practice
I can't see why a client would want e.g. multiple readlink calls in a
comound, but it's probably a spec violation for us not to handle it.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As long as we're here, let's enforce the protocol's limit on the number
of directory entries to return in a readdir.
I don't think anyone's ever noticed our lack of enforcement, but maybe
there's more of a chance they will now that we allow larger readdirs.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we limit readdir results to a single page. This can result in
a performance regression compared to NFSv3 when reading large
directories.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we know the limits the session places on the size of the rpc, we
can also use that information to release any unnecessary reserved reply
buffer space.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can simplify session limit enforcement by restricting the xdr buflen
to the session size.
Also fix a preexisting bug: we should really have been taking into
account the auth-required space when comparing against session limits,
which are limits on the size of the entire rpc reply, including any krb5
overhead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We don't necessarily want to assume that the buflen is the same
as the number of bytes available in the pages. We may have some reason
to set it to something less (for example, later patches will use a
smaller buflen to enforce session limits).
So, calculate the buflen relative to the previous buflen instead of
recalculating it from scratch.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It will turn out to be useful to have a more accurate estimate of reply
size; so, piggyback on the existing op reply-size estimators.
Also move nfsd4_max_reply to nfs4proc.c to get easier access to struct
nfsd4_operation and friends. (Thanks to Christoph Hellwig for pointing
out that simplification.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I ran into this corner case in testing: in theory clients can provide
state owners up to 1024 bytes long. In the sessions case there might be
a risk of this pushing us over the DRC slot size.
The conflicting owner isn't really that important, so let's humor a
client that provides a small maxresponsize_cached by allowing ourselves
to return without the conflicting owner instead of outright failing the
operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Limits on maxresp_sz mean that we only ever need to replay rpc's that
are contained entirely in the head.
The one exception is very small zero-copy reads. That's an odd corner
case as clients wouldn't normally ask those to be cached.
in any case, this seems a little more robust.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that all op encoders can handle running out of space, we no longer
need to check the remaining size for every operation; only nonidempotent
operations need that check, and that can be done by
nfsd4_check_resp_size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we've included page-cache pages in the encoding it's difficult to
remove them and restart encoding. (xdr_truncate_encode doesn't handle
that case.) So, make sure we'll have adequate space to finish the
operation first.
For now COMPOUND_SLACK_SPACE checks should prevent this case happening,
but we want to remove those checks.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've tried to prevent running out of space with COMPOUND_SLACK_SPACE
and special checking in those operations (getattr) whose result can vary
enormously.
However:
- COMPOUND_SLACK_SPACE may be difficult to maintain as we add
more protocol.
- BUG_ON or page faulting on failure seems overly fragile.
- Especially in the 4.1 case, we prefer not to fail compounds
just because the returned result came *close* to session
limits. (Though perfect enforcement here may be difficult.)
- I'd prefer encoding to be uniform for all encoders instead of
having special exceptions for encoders containing, for
example, attributes.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Normally xdr encoding proceeds in a single pass from start of a buffer
to end, but sometimes we have to write a few bytes to an earlier
position.
Use write_bytes_to_xdr_buf for these cases rather than saving a pointer
to write to. We plan to rewrite xdr_reserve_space to handle encoding
across page boundaries using a scratch buffer, and don't want to risk
writing to a pointer that was contained in a scratch buffer.
Also it will no longer be safe to calculate lengths by subtracting two
pointers, so use xdr_buf offsets instead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xdr_reserve_space should now be calculating the length correctly as we
go, so there's no longer any need to fix it up here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a cosmetic change for now; no change in behavior.
Note we're just depending on xdr_reserve_space to do the bounds checking
for us, we're not really depending on its adjustment of iovec or xdr_buf
lengths yet, as those are fixed up by as necessary after the fact by
read-link operations and by nfs4svc_encode_compoundres. However we do
have to update xdr->iov on read-like operations to prevent
xdr_reserve_space from messing with the already-fixed-up length of the
the head.
When the attribute encoding fails partway through we have to undo the
length adjustments made so far. We do it manually for now, but later
patches will add an xdr_truncate_encode() helper to handle cases like
this.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This post-encoding check should be taking into account the need to
encode at least an out-of-space error to the following op (if any).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd4_check_resp_size() returns an error then we should really be
truncating the reply here, otherwise we may leave extra garbage at the
end of the rpc reply.
Also add a warning to catch any cases where our reply-size estimates may
be wrong in the case of a non-idempotent operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently if the nfs-level part of a reply would be too large, we'll
return an error to the client. But if the nfs-level part fits and
leaves no room for krb5p or krb5i stuff, then we just drop the request
entirely.
That's no good. Instead, reserve some slack space at the end of the
buffer and make sure we fail outright if we'd come close.
The slack space here is a massive overstimate of what's required, we
should probably try for a tighter limit at some point.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just change the nfsd4_encode_getattr api. Not changing any code or
adding any new functionality yet.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a mechanical transformation with no change in behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently a non-idempotent op reply may be cached if it fails in the
proc code but not if it fails at xdr decoding. I doubt there are any
xdr-decoding-time errors that would make this a problem in practice, so
this probably isn't a serious bug.
The space estimates should also take into account space required for
encoding of error returns. Again, not a practical problem, though it
would become one after future patches which will tighten the space
estimates.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client is actually asking for 2532 bytes. I suspect that's a
mistake. But maybe we can allow some more. In theory lock needs more
if it might return a maximum-length lockowner in the denied case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
OP_MODIFIES_SOMETHING flags operations that we should be careful not to
initiate without being sure we have the buffer space to encode a reply.
None of these ops fall into that category.
We could probably remove a few more, but this isn't a very important
problem at least for ops whose reply size is easy to estimate.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
PF_LESS_THROTTLE has a very specific use case: to avoid deadlocks
and live-locks while writing to the page cache in a loop-back
NFS mount situation.
It therefore makes sense to *only* set PF_LESS_THROTTLE in this
situation.
We now know when a request came from the local-host so it could be a
loop-back mount. We already know when we are handling write requests,
and when we are doing anything else.
So combine those two to allow nfsd to still be throttled (like any
other process) in every situation except when it is known to be
problematic.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a kmem_cache_destroy wrapper in nfsd, just do proper
goto based unwinding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Assignments should not happen inside an if conditional, but in the line
before. This issue was reported by checkpatch.
The semantic patch that makes this change is as follows
(http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i1;
expression e1;
statement S;
@@
-if(!(i1 = e1)) S
+i1 = e1;
+if(!i1)
+S
// </smpl>
It has been tested by compilation.
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're not cleaning up everything we need to on error. In particular,
we're not removing our lease. Among other problems this can cause the
struct nfs4_file used as fl_owner to be referenced after it has been
destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're clearing the SUID/SGID bits on write by hand in nfsd_vfs_write,
even though the subsequent vfs_writev() call will end up doing this for
us (through file system write methods eventually calling
file_remove_suid(), e.g., from __generic_file_aio_write).
So, remove the redundant nfsd code.
The only change in behavior is when the write is by root, in which case
we previously cleared SUID/SGID, but will now leave it alone. The new
behavior is the behavior of every filesystem we've checked.
It seems better to be consistent with local filesystem behavior. And
the security advantage seems limited as root could always restore these
bits by hand if it wanted.
SUID/SGID is not cleared after writing data with (root, local ext4),
File: ‘test’
Size: 0 Blocks: 0 IO Block: 4096 regular
empty file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.016029014 +0800
Change: 2014-04-18 21:36:31.026030285 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 4096 regular file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.040032065 +0800
Change: 2014-04-18 21:36:31.040032065 +0800
Birth: -
With no_root_squash, (root, remote ext4), SUID/SGID are cleared,
File: ‘test’
Size: 0 Blocks: 0 IO Block: 262144 regular
empty file
Device: 24h/36d Inode: 786439 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.155805097 +0800
Change: 2014-04-18 21:45:32.168806749 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 262144 regular file
Device: 24h/36d Inode: 786439 Links: 1
Access: (0777/-rwxrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.184808783 +0800
Change: 2014-04-18 21:45:32.184808783 +0800
Birth: -
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code assumes a one-to-one lockowner<->lock stateid
correspondance.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.
We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.
Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As of 06f9cc12ca "nfsd4: don't create
unnecessary mask acl", any non-trivial ACL will be left with an
unitialized entry, and a trivial ACL may write one entry beyond what's
allocated.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use fh_fsid when reffering to the fsid part of the filehandle. The
variable length auth field envisioned in nfsfh wasn't ever implemented.
Also clean up some lose ends around this and document the file handle
format better.
Btw, why do we even export nfsfh.h to userspace? The file handle very
much is kernel private, and nothing in nfs-utils include the header
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit 4ac7249ea5 have remove all EXPORT_SYMBOL,
linux/export.h is not needed, just clean it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the state locking and file descriptor reference out from the
callers and into nfs4_preprocess_stateid_op() itself.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
They do not need to be used outside fs/nfsd/nfs4state.c
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is almost nothing left it in, just merge it into the only file
that includes it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two. Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It is large, it is used in more than one place, and it is not performance
critical. Let gcc figure out whether it should be inlined...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mainly to ensure that we don't leave any hanging timers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Aside from making it clearer what is non-trivial in create_client(), it
also fixes a bug whereby we can call free_client() before idr_init()
has been called.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we're still limiting attributes to a page, the result here is that
a large getattr result will return NFS4ERR_REP_TOO_BIG/TOO_BIG_TO_CACHE
instead of NFS4ERR_RESOURCE.
Both error returns are wrong, and the real bug here is the arbitrary
limit on getattr results, fixed by as-yet out-of-tree patches. But at a
minimum we can make life easier for clients by sticking to one broken
behavior in released kernels instead of two....
Trond says:
one immediate consequence of this patch will be that NFSv4.1
clients will now report EIO instead of EREMOTEIO if they hit the
problem. That may make debugging a little less obvious.
Another consequence will be that if we ever do try to add client
side handling of NFS4ERR_REP_TOO_BIG, then we now have to deal
with the “handle existing buggy server” syndrome.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...otherwise the logic in the timeout handling doesn't work correctly.
Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"Highlights:
- server-side nfs/rdma fixes from Jeff Layton and Tom Tucker
- xdr fixes (a larger xdr rewrite has been posted but I decided it
would be better to queue it up for 3.16).
- miscellaneous fixes and cleanup from all over (thanks especially to
Kinglong Mee)"
* 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits)
nfsd4: don't create unnecessary mask acl
nfsd: revert v2 half of "nfsd: don't return high mode bits"
nfsd4: fix memory leak in nfsd4_encode_fattr()
nfsd: check passed socket's net matches NFSd superblock's one
SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed
NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp
SUNRPC: New helper for creating client with rpc_xprt
NFSD: Free backchannel xprt in bc_destroy
NFSD: Clear wcc data between compound ops
nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+
nfsd4: fix nfs4err_resource in 4.1 case
nfsd4: fix setclientid encode size
nfsd4: remove redundant check from nfsd4_check_resp_size
nfsd4: use more generous NFS4_ACL_MAX
nfsd4: minor nfsd4_replay_cache_entry cleanup
nfsd4: nfsd4_replay_cache_entry should be static
nfsd4: update comments with obsolete function name
rpc: Allow xdr_buf_subsegment to operate in-place
NFSD: Using free_conn free connection
SUNRPC: fix memory leak of peer addresses in XPRT
...
Pull renameat2 system call from Miklos Szeredi:
"This adds a new syscall, renameat2(), which is the same as renameat()
but with a flags argument.
The purpose of extending rename is to add cross-rename, a symmetric
variant of rename, which exchanges the two files. This allows
interesting things, which were not possible before, for example
atomically replacing a directory tree with a symlink, etc... This
also allows overlayfs and friends to operate on whiteouts atomically.
Andy Lutomirski also suggested a "noreplace" flag, which disables the
overwriting behavior of rename.
These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only
implemented for ext4 as an example and for testing"
* 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ext4: add cross rename support
ext4: rename: split out helper functions
ext4: rename: move EMLINK check up
ext4: rename: create ext4_renament structure for local vars
vfs: add cross-rename
vfs: lock_two_nondirectories: allow directory args
security: add flags to rename hooks
vfs: add RENAME_NOREPLACE flag
vfs: add renameat2 syscall
vfs: rename: use common code for dir and non-dir
vfs: rename: move d_move() up
vfs: add d_is_dir()
Any setattr of the ACL attribute, even if it sets just the basic 3-ACE
ACL exactly as it was returned from a file with only mode bits, creates
a mask entry, and it is only the mask, not group, entry that is changed
by subsequent modifications of the mode bits.
So, for example, it's surprising that GROUP@ is left without read or
write permissions after a chmod 0666:
touch test
chmod 0600 test
nfs4_getfacl test
A::OWNER@:rwatTcCy
A::GROUP@:tcy
A::EVERYONE@:tcy
nfs4_getfacl test | nfs4_setfacl -S - test #
chmod 0666 test
nfs4_getfacl test
A::OWNER@:rwatTcCy
A::GROUP@:tcy
D::GROUP@:rwa
A::EVERYONE@:rwatcy
So, let's stop creating the unnecessary mask ACL.
A mask will still be created on non-trivial ACLs (ACLs with actual named
user and group ACEs), so the odd posix-acl behavior of chmod modifying
only the mask will still be left in that case; but that's consistent
with local behavior.
Reported-by: Soumya Koduri <skoduri@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This reverts the part of commit 6e14b46b91
that changes NFSv2 behavior.
Mark Lord found that it broke nfs-root for Linux clients, because it
broke NFSv2.
In fact, from RFC 1094:
"Notice that the file type is specified both in the mode bits
and in the file type. This is really a bug in the protocol and
will be fixed in future versions."
So NFSv2 clients really are expected to depend on the high bits of the
mode.
Cc: stable@kernel.org
Reported-by: Mark Lord <mlord@pobox.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit 6307f8fee2 ("security: remove dead hook task_setgroups"),
set_groups will always return zero, so we could just remove return value
of set_groups.
This patch reduces code size, and simplfies code to use set_groups,
because we don't need to check its return value any more.
[akpm@linux-foundation.org: remove obsolete claims from set_groups() comment]
Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add new renameat2 syscall, which is the same as renameat with an added
flags argument.
Pass flags to vfs_rename() and to i_op->rename() as well.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: J. Bruce Fields <bfields@redhat.com>
fh_put() does not free the temporary file handle.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Besides checking rpc_xprt out of xs_setup_bc_tcp,
increase it's reference (it's important).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Testing NFS4.0 by pynfs, I got some messeages as,
"nfsd: inode locked twice during operation."
When one compound RPC contains two or more ops that locks
the filehandle,the second op will cause the message.
As two SETATTR ops, after the first SETATTR, nfsd will not call
fh_put() to release current filehandle, it means filehandle have
unlocked with fh_post_saved = 1.
The second SETATTR find fh_post_saved = 1, and printk the message.
v2: introduce helper fh_clear_wcc().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC5661 obsoletes NFS4ERR_STALE_STATEID in favour of NFS4ERR_BAD_STATEID.
Note that because nfsd encodes the clientid boot time in the stateid, we
can hit this error case in certain scenarios where the Linux client
state management thread exits early, before it has finished recovering
all state.
Reported-by: Idan Kedar <idank@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
encode_getattr, for example, can return nfserr_resource to indicate it
ran out of buffer space. That's not a legal error in the 4.1 case. And
in the 4.1 case, if we ran out of buffer space, we should have exceeded
a session limit too.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
cstate->slot and ->session are each set together in nfsd4_sequence. If
one is non-NULL, so is the other.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Connection from alloc_conn must be freed through free_conn,
otherwise, the reference of svc_xprt will never be put.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We have a WARN_ON in the nfsd4_decode_write() that tells us when the
client has sent a request that is not padded out properly according to
RFC4506. A WARN_ON really isn't appropriate in this case though since
this indicates a client bug, not a server one.
Move this check out to the top-level compound decoder and have it just
explicitly return an error. Also add a dprintk() that shows the client
address and xid to help track down clients and frames that trigger it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Looks like this bug has been here since these write counts were
introduced, not sure why it was just noticed now.
Thanks also to Jan Kara for pointing out the problem.
Cc: stable@vger.kernel.org
Reported-by: Matthew Rahtz <mrahtz@rapitasystems.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Himangi Saraogi