Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.
A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
is written with a single command.
Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().
Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g. because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.
Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Block drivers must call del_gendisk() before blk_cleanup_queue().
del_gendisk() calls kobject_del() and kobject_del() waits until any
ongoing sysfs callback functions have finished. In other words, the
sysfs callback functions won't be called for a queue in the dying
state. Hence remove the "dying" checks from the sysfs callback
functions.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have updated limits after calling wbt_set_min_lat(). No need to
update again.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cecf5d87ff ("block: split .sysfs_lock into two locks") starts to
release & acquire sysfs_lock before registering/un-registering elevator
queue during switching elevator for avoiding potential deadlock from
showing & storing 'queue/iosched' attributes and removing elevator's
kobject.
Turns out there isn't such deadlock because 'q->sysfs_lock' isn't
required in .show & .store of queue/iosched's attributes, and just
elevator's sysfs lock is acquired in elv_iosched_store() and
elv_iosched_show(). So it is safe to hold queue's sysfs lock when
registering/un-registering elevator queue.
The biggest issue is that commit cecf5d87ff assumes that concurrent
write on 'queue/scheduler' can't happen. However, this assumption isn't
true, because kernfs_fop_write() only guarantees that concurrent write
aren't called on the same open file, but the write could be from
different open on the file. So we can't release & re-acquire queue's
sysfs lock during switching elevator, otherwise use-after-free on
elevator could be triggered.
Fixes the issue by not releasing queue's sysfs lock during switching
elevator.
Fixes: cecf5d87ff ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=Qt+h
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Two NVMe pull requests:
- ana log parse fix from Anton
- nvme quirks support for Apple devices from Ben
- fix missing bio completion tracing for multipath stack devices
from Hannes and Mikhail
- IP TOS settings for nvme rdma and tcp transports from Israel
- rq_dma_dir cleanups from Israel
- tracing for Get LBA Status command from Minwoo
- Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
- Some consolidation between the fabrics transports for handling
the CAP register
- reset race with ns scanning fix for fabrics (move fabrics
commands to a dedicated request queue with a different lifetime
from the admin request queue)."
- controller reset and namespace scan races fixes
- nvme discovery log change uevent support
- naming improvements from Keith
- multiple discovery controllers reject fix from James
- some regular cleanups from various people
- Series fixing (and re-fixing) null_blk debug printing and nr_devices
checks (André)
- A few pull requests from Song, with fixes from Andy, Guoqing,
Guilherme, Neil, Nigel, and Yufen.
- REQ_OP_ZONE_RESET_ALL support (Chaitanya)
- Bio merge handling unification (Christoph)
- Pick default elevator correctly for devices with special needs
(Damien)
- Block stats fixes (Hou)
- Timeout and support devices nbd fixes (Mike)
- Series fixing races around elevator switching and device add/remove
(Ming)
- sed-opal cleanups (Revanth)
- Per device weight support for BFQ (Fam)
- Support for blk-iocost, a new model that can properly account cost of
IO workloads. (Tejun)
- blk-cgroup writeback fixes (Tejun)
- paride queue init fixes (zhengbin)
- blk_set_runtime_active() cleanup (Stanley)
- Block segment mapping optimizations (Bart)
- lightnvm fixes (Hans/Minwoo/YueHaibing)
- Various little fixes and cleanups
* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
null_blk: format pr_* logs with pr_fmt
null_blk: match the type of parameter nr_devices
null_blk: do not fail the module load with zero devices
block: also check RQF_STATS in blk_mq_need_time_stamp()
block: make rq sector size accessible for block stats
bfq: Fix bfq linkage error
raid5: use bio_end_sector in r5_next_bio
raid5: remove STRIPE_OPS_REQ_PENDING
md: add feature flag MD_FEATURE_RAID0_LAYOUT
md/raid0: avoid RAID0 data corruption due to layout confusion.
raid5: don't set STRIPE_HANDLE to stripe which is in batch list
raid5: don't increment read_errors on EILSEQ return
nvmet: fix a wrong error status returned in error log page
nvme: send discovery log page change events to userspace
nvme: add uevent variables for controller devices
nvme: enable aen regardless of the presence of I/O queues
nvme-fabrics: allow discovery subsystems accept a kato
nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
nvme: Remove redundant assignment of cq vector
nvme: Assign subsys instance from first ctrl
...
cecf5d87ff ("block: split .sysfs_lock into two locks") starts to
release & actuire sysfs_lock again during switching elevator. So it
isn't enough to prevent switching elevator from happening by simply
clearing QUEUE_FLAG_REGISTERED with holding sysfs_lock, because
in-progress switch still can move on after re-acquiring the lock,
meantime the flag of QUEUE_FLAG_REGISTERED won't get checked.
Fixes this issue by checking 'q->elevator' directly & locklessly after
q->kobj is removed in blk_unregister_queue(), this way is safe because
q->elevator can't be changed at that time.
Fixes: cecf5d87ff ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store
path. Meantime, inside block's .show/.store callback, q->sysfs_lock is
required.
However, when mq & iosched kobjects are removed via
blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held
too. This way causes AB-BA lock because the kernfs built-in lock of
'kn-count' is required inside kobject_del() too, see the lockdep warning[1].
On the other hand, it isn't necessary to acquire q->sysfs_lock for
both blk_mq_unregister_dev() & elv_unregister_queue() because
clearing REGISTERED flag prevents storing to 'queue/scheduler'
from being happened. Also sysfs write(store) is exclusive, so no
necessary to hold the lock for elv_unregister_queue() when it is
called in switching elevator path.
So split .sysfs_lock into two: one is still named as .sysfs_lock for
covering sync .store, the other one is named as .sysfs_dir_lock
for covering kobjects and related status change.
sysfs itself can handle the race between add/remove kobjects and
showing/storing attributes under kobjects. For switching scheduler
via storing to 'queue/scheduler', we use the queue flag of
QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then
we can avoid to hold .sysfs_lock during removing/adding kobjects.
[1] lockdep warning
======================================================
WARNING: possible circular locking dependency detected
5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted
------------------------------------------------------
rmmod/777 is trying to acquire lock:
00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72
but task is already holding lock:
00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&q->sysfs_lock){+.+.}:
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__mutex_lock+0x14a/0xa9b
blk_mq_hw_sysfs_show+0x63/0xb6
sysfs_kf_seq_show+0x11f/0x196
seq_read+0x2cd/0x5f2
vfs_read+0xc7/0x18c
ksys_read+0xc4/0x13e
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (kn->count#202){++++}:
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
__kernfs_remove+0x237/0x40b
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->sysfs_lock);
lock(kn->count#202);
lock(&q->sysfs_lock);
lock(kn->count#202);
*** DEADLOCK ***
2 locks held by rmmod/777:
#0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk]
#1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b
stack backtrace:
CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4
Call Trace:
dump_stack+0x9a/0xe6
check_noncircular+0x207/0x251
? print_circular_bug+0x32a/0x32a
? find_usage_backwards+0x84/0xb0
check_prev_add+0x5d2/0xc45
validate_chain+0xed3/0xf94
? check_prev_add+0xc45/0xc45
? mark_lock+0x11b/0x804
? check_usage_forwards+0x1ca/0x1ca
__lock_acquire+0x95f/0xa2f
lock_acquire+0x1b4/0x1e8
? kernfs_remove_by_name_ns+0x59/0x72
__kernfs_remove+0x237/0x40b
? kernfs_remove_by_name_ns+0x59/0x72
? kernfs_next_descendant_post+0x7d/0x7d
? strlen+0x10/0x23
? strcmp+0x22/0x44
kernfs_remove_by_name_ns+0x59/0x72
remove_files+0x61/0x96
sysfs_remove_group+0x81/0xa4
sysfs_remove_groups+0x3b/0x44
kobject_del+0x44/0x94
blk_mq_unregister_dev+0x83/0xdd
blk_unregister_queue+0xa0/0x10b
del_gendisk+0x259/0x3fa
? disk_events_poll_msecs_store+0x12b/0x12b
? check_flags+0x1ea/0x204
? mark_held_locks+0x1f/0x7a
null_del_dev+0x8b/0x1c3 [null_blk]
null_exit+0x5c/0x95 [null_blk]
__se_sys_delete_module+0x204/0x337
? free_module+0x39f/0x39f
? blkcg_maybe_throttle_current+0x8a/0x718
? rwlock_bug+0x62/0x62
? __blkcg_punt_bio_submit+0xd0/0xd0
? trace_hardirqs_on_thunk+0x1a/0x20
? mark_held_locks+0x1f/0x7a
? do_syscall_64+0x4c/0x295
do_syscall_64+0xa7/0x295
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7fb696cdbe6b
Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008
RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b
RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828
RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000
R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0
R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are 4 users which check if queue is registered, so add one helper
to check it.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_exit_queue will free elevator_data, while blk_mq_requeue_work
will access it. Move cancel of requeue_work to the front of
blk_exit_queue to avoid use-after-free.
blk_exit_queue blk_mq_requeue_work
__elevator_exit blk_mq_run_hw_queues
blk_mq_exit_sched blk_mq_run_hw_queue
dd_exit_queue blk_mq_hctx_has_pending
kfree(elevator_data) blk_mq_sched_has_work
dd_has_work
Fixes: fbc2a15e34 ("blk-mq: move cancel of requeue_work into blk_mq_release")
Cc: stable@vger.kernel.org
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In theory, IO scheduler belongs to request queue, and the request pool
of sched tags belongs to the request queue too.
However, the current tags allocation interfaces are re-used for both
driver tags and sched tags, and driver tags is definitely host wide,
and doesn't belong to any request queue, same with its request pool.
So we need tagset instance for freeing request of sched tags.
Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case
of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched
tags to be freed before calling blk_mq_free_tag_set().
Commit 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
moves blk_exit_queue into __blk_release_queue for simplying the fast
path in generic_make_request(), then causes oops during freeing requests
of sched tags in __blk_release_queue().
Fix the above issue by move freeing request pool of sched tags into
blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any
in-queue requests at that time. Freeing sched tags has to be kept in queue's
release handler becasue there might be un-completed dispatch activity
which might refer to sched tags.
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 498f6650ae ("block: Fix a race between the cgroup code and
request queue initialization") moves what blk_exit_queue does into
blk_cleanup_queue() for fixing issue caused by changing back
queue lock.
However, after legacy request IO path is killed, driver queue lock
won't be used at all, and there isn't story for changing back
queue lock. Then the issue addressed by Commit 498f6650ae doesn't
exist any more.
So move move blk_exit_queue into __blk_release_queue.
This patch basically reverts the following two commits:
498f6650ae block: Fix a race between the cgroup code and request queue initialization
24ecc35853 block: Ensure that a request queue is dissociated from the cgroup controller
Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the low level driver has no timeout handler, the
/sys/block/<disk>/queue/io_timeout will not be displayed.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For q->poll_nsec == -1, means doing classic poll, not hybrid poll.
We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which
may make code much easier to read.
Additionally, since val is an int obtained with kstrtoint(), val can be
a negative value other than -1, so return -EINVAL for that case.
Thanks to Damien Le Moal for some good suggestion.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There's no reason to set wbt min lat and freeze request queue
if current value is the same.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The Notes section of the comment was removed, because now
blk_release_queue can only be executed from blk_cleanup_queue (being
called when the q->kobj reaches zero), and also blk_init_queue was removed
in a1ce35fa49.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
Now that the the SCSI layer replaced the use of the cluster flag with
segment size limits and the DMA boundary we can remove the cluster flag
from the block layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The queue mapping of type poll only exists when set->map[HCTX_TYPE_POLL].nr_queues
is bigger than zero, so enhance the constraint by checking .nr_queues of type poll
before enabling IO poll.
Otherwise IO race & timeout can be observed when running block/007.
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids having to have differnet mq_ops for different setups
with or without poll queues.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Give a interface to adjust io timeout(ms) by device.
Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Various spots check for q->mq_ops being non-NULL, but provide
a helper to do this instead.
Where the ->mq_ops != NULL check is redundant, remove it.
Since mq == rq-based now that legacy is gone, get rid of the
queue_is_rq_based() and just use queue_is_mq() everywhere.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the legacy request path gone there is no good reason to keep
queue_lock as a pointer, we can always use the embedded lock now.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixed floppy and blk-cgroup missing conversions and half done edits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->queue_flags is generally not set or cleared in the fast path, and also
generally set or cleared one flag at a time. Make use of the normal
atomic bitops for it so that we don't need to take the queue_lock,
which is otherwise mostly unused in the core block layer now.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.
Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.
Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's now unused, kill it.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
rq_qos_exit() removes the current q->rq_qos, this action has to be
done after queue is frozen, otherwise the IO queue path may never
be waken up, then IO hang is caused.
So fixes this issue by moving rq_qos_exit() after queue is frozen.
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drivers exposing zoned block devices have to initialize and maintain
correctness (i.e. revalidate) of the device zone bitmaps attached to
the device request queue (seq_zones_bitmap and seq_zones_wlock).
To simplify coding this, introduce a generic helper function
blk_revalidate_disk_zones() suitable for most (and likely all) cases.
This new function always update the seq_zones_bitmap and seq_zones_wlock
bitmaps as well as the queue nr_zones field when called for a disk
using a request based queue. For a disk using a BIO based queue, only
the number of zones is updated since these queues do not have
schedulers and so do not need the zone bitmaps.
With this change, the zone bitmap initialization code in sd_zbc.c can be
replaced with a call to this function in sd_zbc_read_zones(), which is
called from the disk revalidate block operation method.
A call to blk_revalidate_disk_zones() is also added to the null_blk
driver for devices created with the zoned mode enabled.
Finally, to ensure that zoned devices created with dm-linear or
dm-flakey expose the correct number of zones through sysfs, a call to
blk_revalidate_disk_zones() is added to dm_table_set_restrictions().
The zone bitmaps allocated and initialized with
blk_revalidate_disk_zones() are freed automatically from
__blk_release_queue() using the block internal function
blk_queue_free_zone_bitmaps().
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose through sysfs the nr_zones field of struct request_queue.
Exposing this value helps in debugging disk issues as well as
facilitating scripts based use of the disk (e.g. blktests).
For zoned block devices, the nr_zones field indicates the total number
of zones of the device calculated using the known disk capacity and
zone size. This number of zones is always 0 for regular block devices.
Since nr_zones is defined conditionally with CONFIG_BLK_DEV_ZONED,
introduce the blk_queue_nr_zones() function to return the correct value
for any device, regardless if CONFIG_BLK_DEV_ZONED is set.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the ability to have per-rq flags. We used
those flags to maintain inflight counts. Since we don't have those
anymore, we have to always maintain inflight counts, even if wbt is
disabled. This is clearly suboptimal.
Add a queue quiesce around changing the wbt latency settings from sysfs
to work around this. With that, we can reliably put the enabled check in
our bio_to_wbt_flags(), since we know the WBT_TRACKED flag will be
consistent for the lifetime of the request.
Fixes: c1c80384c8 ("block: remove external dependency on wbt_flags")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For legacy queues the only call of blkg_root_lookup() happens after
bypass mode has been enabled. Since blkg_lookup() returns NULL for
queues in bypass mode, modify the blkg_root_lookup() such that it
no longer depends on bypass mode. Rename the function into
blk_queue_root_blkg() as suggested by Tejun.
Suggested-by: Tejun Heo <tj@kernel.org>
Fixes: 6bad9b210a ("blkcg: Introduce blkg_root_lookup()")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Several block drivers call alloc_disk() followed by put_disk() if
something fails before device_add_disk() is called without calling
blk_cleanup_queue(). Make sure that also for this scenario a request
queue is dissociated from the cgroup controller. This patch avoids
that loading the parport_pc, paride and pf drivers triggers the
following kernel crash:
BUG: KASAN: null-ptr-deref in pi_init+0x42e/0x580 [paride]
Read of size 4 at addr 0000000000000008 by task modprobe/744
Call Trace:
dump_stack+0x9a/0xeb
kasan_report+0x139/0x350
pi_init+0x42e/0x580 [paride]
pf_init+0x2bb/0x1000 [pf]
do_one_initcall+0x8e/0x405
do_init_module+0xd9/0x2f2
load_module+0x3ab4/0x4700
SYSC_finit_module+0x176/0x1a0
do_syscall_64+0xee/0x2b0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Reported-by: Alexandru Moise <00moses.alexander00@gmail.com>
Fixes: a063057d7c ("block: Fix a race between request queue removal and the block cgroup controller") # v4.17
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Alexandru Moise <00moses.alexander00@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Alexandru Moise <00moses.alexander00@gmail.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkcg-qos is going to do essentially what wbt does, only on a cgroup
basis. Break out the common code that will be shared between blkcg-qos
and wbt into blk-rq-qos.* so they can both utilize the same
infrastructure.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the core block functionality to embedded bio sets.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.
see: https://lkml.org/lkml/2016/8/2/1945
Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>
Miscellanea:
o Wrapped modified multi-line calls to a single line where appropriate
o Realign modified multi-line calls to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce functions that modify the queue flags and that protect
these modifications with the request queue lock. Except for moving
one wake_up_all() call from inside to outside a critical section,
this patch does not change any functionality.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that the following race can occur:
blk_cleanup_queue() blkcg_print_blkgs()
spin_lock_irq(lock) (1) spin_lock_irq(blkg->q->queue_lock) (2,5)
q->queue_lock = &q->__queue_lock (3)
spin_unlock_irq(lock) (4)
spin_unlock_irq(blkg->q->queue_lock) (6)
(1) take driver lock;
(2) busy loop for driver lock;
(3) override driver lock with internal lock;
(4) unlock driver lock;
(5) can take driver lock now;
(6) but unlock internal lock.
This change is safe because only the SCSI core and the NVME core keep
a reference on a request queue after having called blk_cleanup_queue().
Neither driver accesses any of the removed data structures between its
blk_cleanup_queue() and blk_put_queue() calls.
Reported-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The __blk_mq_register_dev(), blk_mq_unregister_dev(),
elv_register_queue() and elv_unregister_queue() calls need to be
protected with sysfs_lock but other code in these functions not.
Hence protect only this code with sysfs_lock. This patch fixes a
locking inversion issue in blk_unregister_queue() and also in an
error path of blk_register_queue(): it is not allowed to hold
sysfs_lock around the kobject_del(&q->kobj) call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since I can remember DM has forced the block layer to allow the
allocation and initialization of the request_queue to be distinct
operations. Reason for this is block/genhd.c:add_disk() has requires
that the request_queue (and associated bdi) be tied to the gendisk
before add_disk() is called -- because add_disk() also deals with
exposing the request_queue via blk_register_queue().
DM's dynamic creation of arbitrary device types (and associated
request_queue types) requires the DM device's gendisk be available so
that DM table loads can establish a master/slave relationship with
subordinate devices that are referenced by loaded DM tables -- using
bd_link_disk_holder(). But until these DM tables, and their associated
subordinate devices, are known DM cannot know what type of request_queue
it needs -- nor what its queue_limits should be.
This chicken and egg scenario has created all manner of problems for DM
and, at times, the block layer.
Summary of changes:
- Add device_add_disk_no_queue_reg() and add_disk_no_queue_reg() variant
that drivers may use to add a disk without also calling
blk_register_queue(). Driver must call blk_register_queue() once its
request_queue is fully initialized.
- Return early from blk_unregister_queue() if QUEUE_FLAG_REGISTERED
is not set. It won't be set if driver used add_disk_no_queue_reg()
but driver encounters an error and must del_gendisk() before calling
blk_register_queue().
- Export blk_register_queue().
These changes allow DM to use add_disk_no_queue_reg() to anchor its
gendisk as the "master" for master/slave relationships DM must establish
with subordinate devices referenced in DM tables that get loaded. Once
all "slave" devices for a DM device are known its request_queue can be
properly initialized and then advertised via sysfs -- important
improvement being that no request_queue resource initialization
performed by blk_register_queue() is missed for DM devices anymore.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The original commit e9a823fb34 (block: fix warning when I/O elevator
is changed as request_queue is being removed) is pretty conflated.
"conflated" because the resource being protected by q->sysfs_lock isn't
the queue_flags (it is the 'queue' kobj).
q->sysfs_lock serializes __elevator_change() (via elv_iosched_store)
from racing with blk_unregister_queue():
1) By holding q->sysfs_lock first, __elevator_change() can complete
before a racing blk_unregister_queue().
2) Conversely, __elevator_change() is testing for QUEUE_FLAG_REGISTERED
in case elv_iosched_store() loses the race with blk_unregister_queue(),
it needs a way to know the 'queue' kobj isn't there.
Expand the scope of blk_unregister_queue()'s q->sysfs_lock use so it is
held until after the 'queue' kobj is removed.
To do so blk_mq_unregister_dev() must not also take q->sysfs_lock. So
rename __blk_mq_unregister_dev() to blk_mq_unregister_dev().
Also, blk_unregister_queue() should use q->queue_lock to protect against
any concurrent writes to q->queue_flags -- even though chances are the
queue is being cleaned up so no concurrent writes are likely.
Fixes: e9a823fb34 ("block: fix warning when I/O elevator is changed as request_queue is being removed")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
wbt_init doesn't set q->rq_wb to NULL, if wbt_init return 0,
so check return value is enough, remove NULL checking.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race between changing I/O elevator and request_queue removal
which can trigger the warning in kobject_add_internal. A program can
use sysfs to request a change of elevator at the same time another task
is unregistering the request_queue the elevator would be attached to.
The elevator's kobject will then attempt to be connected to the
request_queue in the object tree when the request_queue has just been
removed from sysfs. This triggers the warning in kobject_add_internal
as the request_queue no longer has a sysfs directory:
kobject_add_internal failed for iosched (error: -2 parent: queue)
------------[ cut here ]------------
WARNING: CPU: 3 PID: 14075 at lib/kobject.c:244 kobject_add_internal+0x103/0x2d0
To fix this warning, we can check the QUEUE_FLAG_REGISTERED flag when
changing the elevator and use the request_queue's sysfs_lock to
serialize between clearing the flag and the elevator testing the flag.
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Avoid that the following complaint is reported:
BUG: sleeping function called from invalid context at kernel/workqueue.c:2790
in_atomic(): 1, irqs_disabled(): 0, pid: 41, name: rcuop/3
1 lock held by rcuop/3/41:
#0: (rcu_callback){......}, at: [<ffffffff8111f9a2>] rcu_nocb_kthread+0x282/0x500
Call Trace:
dump_stack+0x86/0xcf
___might_sleep+0x174/0x260
__might_sleep+0x4a/0x80
flush_work+0x7e/0x2e0
__cancel_work_timer+0x143/0x1c0
cancel_work_sync+0x10/0x20
blk_throtl_exit+0x25/0x60
blkcg_exit_queue+0x35/0x40
blk_release_queue+0x42/0x130
kobject_put+0xa9/0x190
This happens since we invoke callbacks that need to block from the
queue release handler. Fix this by pushing the final release to
a workqueue.
Reported-by: Ross Zwisler <zwisler@gmail.com>
Fixes: commit b425e50492 ("block: Avoid that blk_exit_rl() triggers a use-after-free")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Updated changelog
Signed-off-by: Jens Axboe <axboe@fb.com>
The code in blk-mq-debugfs.c assumes that it is working on a blk-mq
queue and is not intended to work on a blk-sq queue. Hence only
register blk-mq debugfs attributes for blk-mq queues.
Fixes: commit 9c1051aacd ("blk-mq: untangle debugfs and sysfs")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Originally, I tied debugfs registration/unregistration together with
sysfs. There's no reason to do this, and it's getting in the way of
letting schedulers define their own debugfs attributes. Instead, tie the
debugfs registration to the lifetime of the structures themselves.
The saner lifetimes mean we can also get rid of the extra mq directory
and move everything one level up. I.e., nvme0n1/mq/hctx0/tags is now
just nvme0n1/hctx0/tags.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A later patch in this series will modify blk_mq_debugfs_register()
such that it uses q->kobj.parent to determine the name of a
request queue. Hence make sure that that pointer is initialized
before blk_mq_debugfs_register() is called. To avoid lock inversion,
protect sysfs / debugfs registration with the queue sysfs_lock
instead of the global mutex all_q_mutex.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When CFQ is used as an elevator, it disables writeback throttling
because they don't play well together. Later when a different elevator
is chosen for the device, writeback throttling doesn't get enabled
again as it should. Make sure CFQ enables writeback throttling (if it
should be enabled by default) when we switch from it to another IO
scheduler.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch