commit 1168f09541 upstream.
Use kcalloc() for allocation/flush of 128 pointers table to
reduce stack usage.
Function now returns -ENOMEM or 0 on success.
stackusage
Before:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 1208
dynamic,bounded
After:
./fs/jffs2/xattr.c:775 jffs2_build_xattr_subsystem 192
dynamic,bounded
Also update definition when CONFIG_JFFS2_FS_XATTR is not enabled
Tested with an MTD mount point and some user set/getfattr.
Many current target on OpenWRT also suffer from a compilation warning
(that become an error with CONFIG_WERROR) with the following output:
fs/jffs2/xattr.c: In function 'jffs2_build_xattr_subsystem':
fs/jffs2/xattr.c:887:1: error: the frame size of 1088 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
887 | }
| ^
Using dynamic allocation fix this compilation warning.
Fixes: c9f700f840 ("[JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion")
Reported-by: Tim Gardner <tim.gardner@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Ron Economos <re@w6rz.net>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Message-Id: <20230506045612.16616-1-ansuelsmth@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36ce9d76b0 upstream.
As the ramfs-based tmpfs uses ramfs_init_fs_context() for the
init_fs_context method, which allocates fc->s_fs_info, use ramfs_kill_sb()
to free it and avoid a memory leak.
Link: https://lkml.kernel.org/r/20230607161523.2876433-1-roberto.sassu@huaweicloud.com
Fixes: c3b1b1cbf0 ("ramfs: add support for "mode=" mount option")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c11d34fa13 upstream.
It is racy to non-atomically read a pte, then clear the young bit, then
write it back as this could discard dirty information. Further, it is bad
practice to directly set a pte entry within a table. Instead clearing
young must go through the arch-provided helper,
ptep_test_and_clear_young() to ensure it is modified atomically and to
give the arch code visibility and allow it to check (and potentially
modify) the operation.
Link: https://lkml.kernel.org/r/20230602092949.545577-3-ryan.roberts@arm.com
Fixes: 3f49584b26 ("mm/damon: implement primitives for the virtual memory address spaces").
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e910c8e3aa upstream.
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning
for the autofs_dev_ioctl structure:
In function 'check_name',
inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9,
inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8:
fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
33 | if (!strchr(name, '/'))
| ^~~~~~~~~~~~~~~~~
In file included from include/linux/auto_dev-ioctl.h:10,
from fs/autofs/autofs_i.h:10,
from fs/autofs/dev-ioctl.c:14:
include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl':
include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0
112 | char path[0];
| ^~~~
This is easily fixed by changing the gnu 0-length array into a c99
flexible array. Since this is a uapi structure, we have to be careful
about possible regressions but this one should be fine as they are
equivalent here. While it would break building with ancient gcc versions
that predate c99, it helps building with --std=c99 and -Wpedantic builds
in user space, as well as non-gnu compilers. This means we probably
also want it fixed in stable kernels.
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9df6a4870d upstream.
When integrity_inode_get() is querying and inserting the cache, there
is a conditional race in the concurrent environment.
The race condition is the result of not properly implementing
"double-checked locking". In this case, it first checks to see if the
iint cache record exists before taking the lock, but doesn't check
again after taking the integrity_iint_lock.
Fixes: bf2276d10c ("ima: allocating iint improvements")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com>
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5a319ec2c upstream.
When HEADER_ARCH was introduced, the MRPROPER_FILES (then MRPROPER_DIRS)
list wasn't adjusted, leaving SUBARCH as part of the path argument.
This resulted in the "mrproper" target not cleaning up arch/x86/... when
SUBARCH was specified. Since HOST_DIR is arch/$(HEADER_ARCH), use it
instead to get the correct path.
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-um@lists.infradead.org
Fixes: 7bbe7204e9 ("um: merge Makefile-{i386,x86_64}")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230606222442.never.807-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 943211c874 upstream.
NULL the dangling pipe reference while clearing watch_queue.
If not done, a reference to a freed pipe remains in the watch_queue,
as this function is called before freeing a pipe in free_pipe_info()
(see line 834 of fs/pipe.c).
The sole use of wqueue->defunct is for checking if the watch queue has
been cleared, but wqueue->pipe is also NULLed while clearing.
Thus, wqueue->defunct is superfluous, as wqueue->pipe can be checked
for NULL. Hence, the former can be removed.
Tested with keyutils testsuite.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Acked-by: David Howells <dhowells@redhat.com>
Message-Id: <20230605143616.640517-1-code@siddh.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80fca8a10b upstream.
In some specific situations, the return value of __bch_btree_node_alloc
may be NULL. This may lead to a potential NULL pointer dereference in
caller function like a calling chain :
btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.
Fix it by initializing the return value in __bch_btree_node_alloc.
Fixes: cafe563591 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 028ddcac47 upstream.
Due to the previous fix of __bch_btree_node_alloc, the return value will
never be a NULL pointer. So IS_ERR is enough to handle the failure
situation. Fix it by replacing IS_ERR_OR_NULL check by an IS_ERR check.
Fixes: cafe563591 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0854489fc upstream.
We get a kernel crash about "list_add corruption. next->prev should be
prev (ffff9c801bc01210), but was ffff9c77b688237c.
(next=ffffae586d8afe68)."
crash> struct list_head 0xffff9c801bc01210
struct list_head {
next = 0xffffae586d8afe68,
prev = 0xffffae586d8afe68
}
crash> struct list_head 0xffff9c77b688237c
struct list_head {
next = 0x0,
prev = 0x0
}
crash> struct list_head 0xffffae586d8afe68
struct list_head struct: invalid kernel virtual address: ffffae586d8afe68 type: "gdb_readmem_callback"
Cannot access memory at address 0xffffae586d8afe68
[230469.019492] Call Trace:
[230469.032041] prepare_to_wait+0x8a/0xb0
[230469.044363] ? bch_btree_keys_free+0x6c/0xc0 [escache]
[230469.056533] mca_cannibalize_lock+0x72/0x90 [escache]
[230469.068788] mca_alloc+0x2ae/0x450 [escache]
[230469.080790] bch_btree_node_get+0x136/0x2d0 [escache]
[230469.092681] bch_btree_check_thread+0x1e1/0x260 [escache]
[230469.104382] ? finish_wait+0x80/0x80
[230469.115884] ? bch_btree_check_recurse+0x1a0/0x1a0 [escache]
[230469.127259] kthread+0x112/0x130
[230469.138448] ? kthread_flush_work_fn+0x10/0x10
[230469.149477] ret_from_fork+0x35/0x40
bch_btree_check_thread() and bch_dirty_init_thread() may call
mca_cannibalize() to cannibalize other cached btree nodes. Only one thread
can do it at a time, so the op of other threads will be added to the
btree_cache_wait list.
We must call finish_wait() to remove op from btree_cache_wait before free
it's memory address. Otherwise, the list will be damaged. Also should call
bch_cannibalize_unlock() to release the btree_cache_alloc_lock and wake_up
other waiters.
Fixes: 8e7102273f ("bcache: make bch_btree_check() to be multithreaded")
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Cc: stable@vger.kernel.org
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 525c469e5d upstream.
For some cases as below, we may encounter the unpreditable chip stats
in driver probe()
* The system reboot flow do not work properly, such as kernel oops while
rebooting, and then the driver do not go back to default status at
this moment.
* Similar to the flow above. If the device was enabled in BIOS or UEFI,
the system may switch to Linux without driver fully shutdown.
To avoid the problem, force push the device back to default in probe()
* mt7921e_mcu_fw_pmctrl() : return control privilege to chip side.
* mt7921_wfsys_reset() : cleanup chip config before resource init.
Error log
[59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010
[59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout
[59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout
[59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout
[59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout
[59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout
[59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout
[59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout
[59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout
[59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout
[59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout
[59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore
[59040.923845] mt7921e 0000:02:00.0: hardware init failed
Cc: stable@vger.kernel.org
Fixes: 5c14a5f944 ("mt76: mt7921: introduce mt7921e support")
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Juan Martinez <juan.martinez@amd.com>
Co-developed-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b719ebc37a upstream.
Serialize the ath10k implementation of the wake_tx_queue ops.
ath10k_mac_op_wake_tx_queue() must not run concurrent since it's using
ieee80211_txq_schedule_start().
The intend of this patch is to sort out an issue discovered in the discussion
referred to by the Link tag.
I can't test it with real hardware and thus just implemented the per-ac queue
lock Felix suggested. One obvious alternative to the per-ac lock would be to
bring back the txqs_lock commit bb2edb7335 ("ath10k: migrate to mac80211 txq
scheduling") dropped.
Fixes: bb2edb7335 ("ath10k: migrate to mac80211 txq scheduling")
Reported-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/519b5bb9-8899-ae7c-4eff-f3116cdfdb56@nbd.name
CC: <stable@vger.kernel.org>
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230323165527.156414-1-alexander@wetzel-home.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b22552fcaf upstream.
The multi-link loop here broke disconnect when multi-link
operation (MLO) isn't active for a given interface, since
in that case valid_links is 0 (indicating no links, i.e.
no MLO.)
Fix this by taking that into account properly and skipping
the link only if there are valid_links in the first place.
Cc: stable@vger.kernel.org
Fixes: 7b0a0e3c3a ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230616222844.eb073d650c75.I72739923ef80919889ea9b50de9e4ba4baa836ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20dbd07ef0 upstream.
Bayhub SD host has hardware limitation:
1.The upper 32bit address is inhibited to be written at SD Host Register
[03E][13]=0 (32bits addressing) mode, is admitted to be written only at
SD Host Register [03E][13]=1 (64bits addressing) mode.
2.Because of above item#1, need to configure SD Host Register [03E][13] to
1(64bits addressing mode) before set 64bit ADMA system address's higher
32bits SD Host Register [05F~05C] if 64 bits addressing mode is used.
The hardware limitation is reasonable for below reasons:
1.Normal flow should set DMA working mode first, then do
DMA-transfer-related configuration, such as system address.
2.The hardware limitation may avoid the software to configure wrong higher
32bit address at 32bits addressing mode although it is redundant.
The change that set 32bits/64bits addressing mode before set ADMA address,
has no side-effect to other host IPs for below reason:
The setting order is reasonable and standard: DMA Mode setting first and
then DMA address setting. It meets all DMA setting sequence.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230523111114.18124-1-chevron_li@126.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3108eb2e8a upstream.
All mmc host drivers should have the asynchronous probe option enabled, but
it seems like we failed to set it for mmci, so let's do that now.
Fixes: 21b2cec61c ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230612143730.210390-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbfbddcddc upstream.
It seems that Micron MTFC4GACAJCN-1M despite advertising TRIM support does
not work when the core is trying to use REQ_OP_WRITE_ZEROES.
We are seeing the following errors in OpenWrt under 6.1 on Qnap Qhora 301W
that we did not previously have and tracked it down to REQ_OP_WRITE_ZEROES:
[ 18.085950] I/O error, dev loop0, sector 596 op 0x9:(WRITE_ZEROES) flags 0x800 phys_seg 0 prio class 2
Disabling TRIM makes the error go away, so lets add a quirk for this eMMC
to disable TRIM.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230530213259.1776512-1-robimarko@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1738a1f81 upstream.
It seems that Kingston EMMC04G-M627 despite advertising TRIM support does
not work when the core is trying to use REQ_OP_WRITE_ZEROES.
We are seeing I/O errors in OpenWrt under 6.1 on Zyxel NBG7815 that we did
not previously have and tracked it down to REQ_OP_WRITE_ZEROES.
Trying to use fstrim seems to also throw errors like:
[93010.835112] I/O error, dev loop0, sector 16902 op 0x3:(DISCARD) flags 0x800 phys_seg 1 prio class 2
Disabling TRIM makes the error go away, so lets add a quirk for this eMMC
to disable TRIM.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230619193621.437358-1-robimarko@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4826c59453 upstream.
WHen the ring exits, cleanup is done and the final cancelation and
waiting on completions is done by io_ring_exit_work. That function is
invoked by kworker, which doesn't take any signals. Because of that, it
doesn't really matter if we wait for completions in TASK_INTERRUPTIBLE
or TASK_UNINTERRUPTIBLE state. However, it does matter to the hung task
detection checker!
Normally we expect cancelations and completions to happen rather
quickly. Some test cases, however, will exit the ring and park the
owning task stopped (eg via SIGSTOP). If the owning task needs to run
task_work to complete requests, then io_ring_exit_work won't make any
progress until the task is runnable again. Hence io_ring_exit_work can
trigger the hung task detection, which is particularly problematic if
panic-on-hung-task is enabled.
As the ring exit doesn't take signals to begin with, have it wait
interruptibly rather than uninterruptibly. io_uring has a separate
stuck-exit warning that triggers independently anyway, so we're not
really missing anything by making this switch.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/r/b0e4aaef-7088-56ce-244c-976edeac0e66@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f679616565 upstream.
In an ACPI-based dual-bridge system, IRQ of each bridge's
PCH PIC sent to CPU is always a zero-based number, which
means that the IRQ on PCH PIC of each bridge is mapped into
vector range from 0 to 63 of upstream irqchip(e.g. EIOINTC).
EIOINTC N: [0 ... 63 | 64 ... 255]
-------- ----------
^ ^
| |
PCH PIC N |
PCH MSI N
For example, the IRQ vector number of sata controller on
PCH PIC of each bridge is 16, which is sent to upstream
irqchip of EIOINTC when an interrupt occurs, which will set
bit 16 of EIOINTC. Since hwirq of 16 on EIOINTC has been
mapped to a irq_desc for sata controller during hierarchy
irq allocation, the related mapped IRQ will be found through
irq_resolve_mapping() in the IRQ domain of EIOINTC.
So, the IRQ number set in HT vector register should be fixed
to be a zero-based number.
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: liuyun <liuyun@loongson.cn>
Signed-off-by: liuyun <liuyun@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-2-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58f5d89400 upstream.
Modified nfsd4_encode_open to encode the op_recall flag properly
for OPEN result with write delegation granted.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 783422e704 upstream.
In DeviceTree path, when ht_vec_base is not zero, the hwirq of PCH PIC
will be assigned incorrectly. Because when pch_pic_domain_translate()
adds the ht_vec_base to hwirq, the hwirq does not have the ht_vec_base
subtracted when calling irq_domain_set_info().
The ht_vec_base is designed for the parent irq chip/domain of the PCH PIC.
It seems not proper to deal this in callbacks of the PCH PIC domain and
let's put this back like the initial commit ef8c01eb64 ("irqchip: Add
Loongson PCH PIC controller").
Fixes: bcdd75c596 ("irqchip/loongson-pch-pic: Add ACPI init support")
Cc: stable@vger.kernel.org
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230614115936.5950-3-lvjianmin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cd9489623c upstream.
Smatch Warns:
drivers/i2c/busses/i2c-qup.c:1784 qup_i2c_probe()
warn: missing unwind goto?
The goto label "fail_runtime" and "fail" will disable qup->pclk,
but here qup->pclk failed to obtain, in order to be consistent,
change the direct return to goto label "fail_dma".
Fixes: 9cedf3b2f0 ("i2c: qup: Add bam dma capabilities")
Signed-off-by: Shuai Jiang <d202180596@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 39020d8abc ]
At balance_level(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release
all resources in this context, and we have to abort because other future
tree searches that use the tree mod log (btrfs_search_old_slot()) may get
inconsistent results if other operations modify the tree after that
failure and before the tree mod log based search.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3adbaa30d9 ]
The driver can register a typec port if suitable firmware properties are
present. But if the driver is removed through sysfs unbind, rmmod or
similar, then it does not clean up after itself and the typec port
device remains registered. This can be seen in sysfs, where stale typec
ports get left over in /sys/class/typec.
In order to fix this we have to add an i2c_driver remove function and
call typec_unregister_port(), which is a no-op in the case where no
typec port is created and the pointer remains NULL.
In the process we should also put the fwnode_handle when the typec port
isn't registered anymore, including if an error occurs during probe. The
typec subsystem does not increase or decrease the reference counter for
us, so we track it in the driver's private data.
Note that the conditional check on TYPEC_PWR_MODE_PD was removed in the
probe path because a call to tusb320_set_adv_pwr_mode() will perform an
even more robust validation immediately after, hence there is no
functional change here.
Fixes: bf7571c00d ("extcon: usbc-tusb320: Add USB TYPE-C support")
Cc: stable@vger.kernel.org
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5313121b22 ]
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stable-dep-of: 3adbaa30d9 ("extcon: usbc-tusb320: Unregister typec port on driver removal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 249bed821b ]
The version is fetched once in check_version(), which then does some
validation and then overwrites the version in userspace with the API
version supported by the kernel. copy_params() then fetches the version
from userspace *again*, and this time no validation is done. The result
is that the kernel's version number is completely controllable by
userspace, provided that userspace can win a race condition.
Fix this flaw by not copying the version back to the kernel the second
time. This is not exploitable as the version is not further used in the
kernel. However, it could become a problem if future patches start
relying on the version field.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb6e45c9a0 ]
In xiic_process, it is possible that error events such as arbitration
lost or TX error can be raised in conjunction with other interrupt flags
such as TX FIFO empty or bus not busy. Error events result in the
controller being reset and the error returned to the calling request,
but the function could potentially try to keep handling the other
events, such as by writing more messages into the TX FIFO. Since the
transaction has already failed, this is not helpful and will just cause
issues.
This problem has been present ever since:
commit 7f9906bd7f ("i2c: xiic: Service all interrupts in isr")
which allowed non-error events to be handled after errors, but became
more obvious after:
commit 743e227a89 ("i2c: xiic: Defer xiic_wakeup() and
__xiic_start_xfer() in xiic_process()")
which reworked the code to add a WARN_ON which triggers if both the
xfer_more and wakeup_req flags were set, since this combination is
not supposed to happen, but was occurring in this scenario.
Skip further interrupt handling after error flags are detected to avoid
this problem.
Fixes: 7f9906bd7f ("i2c: xiic: Service all interrupts in isr")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 000518bc5a ]
rhashtable_insert_fast() could return err value when memory allocation is
failed. but unpack_profile() do not check values and this always returns
success value. This patch just adds error check code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e025be0f26 ("apparmor: support querying extended trusted helper extra data")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e82e475848 ]
Various SoCs of the SH3, SH4 and SH4A family, which use this driver,
feature a differing number of DMA channels, which can be distributed
between up to two DMAC modules. The existing implementation fails to
correctly accommodate for all those variations, resulting in wrong
channel offset calculations and leading to kernel panics.
Rewrite dma_base_addr() in order to properly calculate channel offsets
in a DMAC module. Fix dmaor_read_reg() and dmaor_write_reg(), so that
the correct DMAC module base is selected for the DMAOR register.
Fixes: 7f47c7189b ("sh: dma: More legacy cpu dma chainsawing.")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230527164452.64797-2-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80de809bd3 ]
Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.
Fixes: 2390166a6b ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03275585ca ]
When an AFS FS.StoreData RPC call is made, amongst other things it is
given the resultant file size to be. On the server, this is processed
by truncating the file to new size and then writing the data.
Now, kafs has a lock (vnode->io_lock) that serves to serialise
operations against a specific vnode (ie. inode), but the parameters for
the op are set before the lock is taken. This allows two writebacks
(say sync and kswapd) to race - and if writes are ongoing the writeback
for a later write could occur before the writeback for an earlier one if
the latter gets interrupted.
Note that afs_writepages() cannot take i_mutex and only takes a shared
lock on vnode->validate_lock.
Also note that the server does the truncation and the write inside a
lock, so there's no problem at that end.
Fix this by moving the calculation for the proposed new i_size inside
the vnode->io_lock. Also reset the iterator (which we might have read
from) and update the mtime setting there.
Fixes: bd80d8a80e ("afs: Use ITER_XARRAY for writing")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3526895.1687960024@warthog.procyon.org.uk/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14bb236b29 ]
MAC block on CN10K (RPM) supports hardware timestamp configuration. The
previous patch which added timestamp configuration support has a bug.
Though the netdev driver requests to disable timestamp configuration,
the driver is always enabling it.
This patch fixes the same.
Fixes: d148920868 ("octeontx2-af: cn10k: RPM hardware timestamp configuration")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a372d66af4 ]
incl_srcpt has the limitation, mentioned in commit b4638af888 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.
The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463d3 ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af888 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).
If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.
This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).
Fixes: 227d07a07e ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dcf6efd5f ]
The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].
The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.
Fixes: e53e18a6fe ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bef5b603 ]
PPTP uses pppox sockets (struct pppox_sock). These sockets don't embed
an inet_sock structure, so it's invalid to call inet_sk() on them.
Therefore, the ip_route_output_ports() call in pptp_connect() has two
problems:
* The tos variable is set with RT_CONN_FLAGS(sk), which calls
inet_sk() on the pppox socket.
* ip_route_output_ports() tries to retrieve routing flags using
inet_sk_flowi_flags(), which is also going to call inet_sk() on the
pppox socket.
While PPTP doesn't use inet sockets, it's actually really layered on
top of IP and therefore needs a proper way to do fib lookups. So let's
define pptp_route_output() to get a struct rtable from a pptp socket.
Let's also replace the ip_route_output_ports() call of pptp_xmit() for
consistency.
In practice, this means that:
* pptp_connect() sets ->flowi4_tos and ->flowi4_flags to zero instead
of using bits of unrelated struct pppox_sock fields.
* pptp_xmit() now respects ->sk_mark and ->sk_uid.
* pptp_xmit() now calls the security_sk_classify_flow() security
hook, thus allowing to set ->flowic_secid.
* pptp_xmit() now passes the pppox socket to xfrm_lookup_route().
Found by code inspection.
Fixes: 00959ade36 ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69562eb0bd ]
Hopefully, nobody is trying to abuse mount/sb marks for watching all
anonymous pipes/inodes.
I cannot think of a good reason to allow this - it looks like an
oversight that dated back to the original fanotify API.
Link: https://lore.kernel.org/linux-fsdevel/20230628101132.kvchg544mczxv2pm@quack3/
Fixes: 0ff21db9fc ("fanotify: hooks the fanotify_mark syscall to the vfsmount code")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230629042044.25723-1-amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30c45b5361 ]
The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and
one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is
smaller than the intended sizeof(struct tc_pedit). Hence, the
dereference in tcf_pedit_init() could access dirty heap data.
static int tcf_pedit_init(...)
{
// ...
pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included
if (!pattr)
pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not
// ...
parm = nla_data(pattr);
index = parm->index; // parm is able to be smaller than 4 bytes
// and this dereference gets dirty skb_buff
// data created in netlink_sendmsg
}
This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid
the above case, just like the TCA_PEDIT_PARMS.
Fixes: 71d0ed7079 ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7306acec9 ]
Initial creation of an AF_XDP socket requires CAP_NET_RAW capability. A
privileged process might create the socket and pass it to a non-privileged
process for later use. However, that process will be able to bind the socket
to any network interface. Even though it will not be able to receive any
traffic without modification of the BPF map, the situation is not ideal.
Sockets already have a mechanism that can be used to restrict what interface
they can be attached to. That is SO_BINDTODEVICE.
To change the SO_BINDTODEVICE binding the process will need CAP_NET_RAW.
Make xsk_bind() honor the SO_BINDTODEVICE in order to allow safer workflow
when non-privileged process is using AF_XDP.
The intended workflow is following:
1. First process creates a bare socket with socket(AF_XDP, ...).
2. First process loads the XSK program to the interface.
3. First process adds the socket fd to a BPF map.
4. First process ties socket fd to a particular interface using
SO_BINDTODEVICE.
5. First process sends socket fd to a second process.
6. Second process allocates UMEM.
7. Second process binds socket to the interface with bind(...).
8. Second process sends/receives the traffic.
All the steps above are possible today if the first process is privileged
and the second one has sufficient RLIMIT_MEMLOCK and no capabilities.
However, the second process will be able to bind the socket to any interface
it wants on step 7 and send traffic from it. With the proposed change, the
second process will be able to bind the socket only to a specific interface
chosen by the first process at step 4.
Fixes: 965a990984 ("xsk: add support for bind for Rx")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/bpf/20230703175329.3259672-1-i.maximets@ovn.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de4d22cc9 ]
__register_btf_kfunc_id_set() assumes .BTF to be part of the module's .ko
file if CONFIG_DEBUG_INFO_BTF is enabled. If that's not the case, the
function prints an error message and return an error. As a result, such
modules cannot be loaded.
However, the section could be stripped out during a build process. It would
be better to let the modules loaded, because their basic functionalities
have no problem [0], though the BTF functionalities will not be supported.
Make the function to lower the level of the message from error to warn, and
return no error.
[0] https://lore.kernel.org/bpf/20220219082037.ow2kbq5brktf4f2u@apollo.legion
Fixes: c446fdacb1 ("bpf: fix register_btf_kfunc_id_set for !CONFIG_DEBUG_INFO_BTF")
Reported-by: Alexander Egorenkov <Alexander.Egorenkov@ibm.com>
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/87y228q66f.fsf@oc8242746057.ibm.com
Link: https://lore.kernel.org/bpf/20220219082037.ow2kbq5brktf4f2u@apollo.legion
Link: https://lore.kernel.org/bpf/20230701171447.56464-1-sj@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998127cdb4 ]
request sockets are lockless, __tcp_oow_rate_limited() could be called
on the same object from different cpus. This is harmless.
Add READ_ONCE()/WRITE_ONCE() annotations to avoid a KCSAN report.
Fixes: 4ce7e93cb3 ("tcp: rate limit ACK sent by SYN_RECV request sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a398b9ea0c ]
There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.
When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7
Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.
The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.
Fixes: c1ae02d876 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca3c005d0 ]
According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.
After running these commands, I am being faced with the following
lockdep splat:
$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up
========================================================
WARNING: possible irq lock inversion dependency detected
6.4.0-04295-g31b577b4bd4a #603 Not tainted
--------------------------------------------------------
swapper/1/0 just changed the state of lock:
ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
but this lock took another, SOFTIRQ-unsafe lock in the past:
(&ocelot->stats_lock){+.+.}-{3:3}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&br->lock --> &br->hash_lock --> &ocelot->stats_lock
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&ocelot->stats_lock);
local_irq_disable();
lock(&br->lock);
lock(&br->hash_lock);
<Interrupt>
lock(&br->lock);
*** DEADLOCK ***
(details about the 3 locks skipped)
swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).
Documentation/locking/lockdep-design.rst says:
| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.
(...)
| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
| <hardirq-safe> -> <hardirq-unsafe>
| <softirq-safe> -> <softirq-unsafe>
Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().
Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.
There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:
ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38
the plain English explanation for it is:
The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.
As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.
Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:
dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
-> dev_get_stats()
-> ocelot_port_get_stats64()
with a calling context that lockdep doesn't like (br->hash_lock held).
Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that
(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
spinlock.
Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.
The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.
I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:
fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.
In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.
Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.
When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.
With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.
Fixes: 2796d0c648 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abaa02fc94 ]
Freescale PCIe controllers on their PCIe Root Ports do not have any
mappable PCI BAR allocate from PCIe MEM.
Information about 1MB window on BAR0 of PCIe Root Port was misleading
because Freescale PCIe controllers have at BAR0 position different register
PEXCSRBAR, and kernel correctly skipts BAR0 for these Freescale PCIe Root
Ports.
So update comment about P2020 PCIe Root Port and decrease PCIe MEM size
required for PCIe controller (pci2 node) on which is on-board xHCI
controller.
lspci confirms that on P2020 PCIe Root Port is no PCI BAR and /proc/iomem
sees that only c0000000-c000ffff and c0010000-c0011fff ranges are used.
Fixes: 54c15ec3b7 ("powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505172818.18416-1-pali@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39f4968403 ]
In a randconfig with CONFIG_SERIAL_CPM=m and
CONFIG_PPC_EARLY_DEBUG_CPM=y, there is a build error:
ERROR: modpost: "udbg_putc" [drivers/tty/serial/cpm_uart/cpm_uart.ko] undefined!
Prevent the build error by allowing PPC_EARLY_DEBUG_CPM only when
SERIAL_CPM=y.
Fixes: c374e00e17 ("[POWERPC] Add early debug console for CPM serial ports.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230701054714.30512-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c675ddffb ]
Here is a BUG report from syzbot:
BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632
Call Trace:
ntfs_list_ea fs/ntfs3/xattr.c:191 [inline]
ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710
vfs_listxattr fs/xattr.c:457 [inline]
listxattr+0x293/0x2d0 fs/xattr.c:804
Fix the logic of ea_all iteration. When the ea->name_len is 0,
return immediately, or Add2Ptr() would visit invalid memory
in the next loop.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Reported-by: syzbot+9fcea5ef6dc4dc72d334@syzkaller.appspotmail.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
[almaz.alexandrovich@paragon-software.com: lines of the patch have changed]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabian Frederick