So that the user can specify outside CFLAGS values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Hartmut Knaack <knaack.h@gmx.de> <knaack.h@gmx.de>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Link: http://lkml.kernel.org/r/20181212102537.25902-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the user can specify outside CFLAGS/LDFLAGS values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/20181212102537.25902-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the user can provide, e.g. distro package alternative values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/20181212102537.25902-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So user could specify outside CFLAGS/LDFLAGS values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Link: https://lkml.kernel.org/r/20181212102537.25902-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cachelines being reported are the ones with percentages all the way
down to 0.05%. That makes for very long output files. Raising that to
0.1%. The user can always specify --show-all if they want all the
cachelines with hits.
Suggested-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181228101820.28010-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joe suggested to have the coalesce default set just to 'iaddr', because
it's easier to read on the default 'perf c2c report' output.
By removing the "pid" field from the default -c/--coalesce option, the
'perf c2c' report will group all the relevant PIDs under the instruction
address ('iaddr') bucket. User can always run "-c pid,iaddr" for a more
fine grained output on particular PIDs.
Suggested-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181228101820.28010-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that beautifiers can access things like dev_maj.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wm5o51f206c5pi063dsaeraq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to generate the string table for the USBDEVFS_ prefixed
ioctl commands.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3vrm9b55tdhzn8sw9qazh4z5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We keep a table for the fds to map them back to pathnames when showing
'fd' based APIs such as write(), store as well the major number for the
device the path is in, to use in things like choosing the right ioctl
'cmd' beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-qjkds7bnk7v7fk2xhqsb0a4v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can have that table expanded when setting other attributes.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hzvpe3qwafe6sqcq3bhtbxds@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can add more per file attributes besides the pathname, such
as which ioctl beautifier to use, for cases such as the sound and
usbdeffs ioctls, that both use the 'U' command, so we have to
differentiate at the major number for the device file.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1895cmhrdz2dkl5prf2cj2yj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a fix for another instance of the skid problem Milian recently
found [1]
The LBRs don't freeze at the exact same time as the PMI is triggered.
The perf script brstackinsn code that dumps LBR assembler assumes that
the last branch in the LBR leads to the sample point. But with skid
it's possible that the CPU executes one or more branches before the
sample, but which do not appear in the LBR.
What happens then is either that the sample point is before the last LBR
branch. In this case the dumper sees a negative length and ignores it.
Or it the sample point is long after the last branch. Then the dumper
sees a very long block and dumps it upto its block limit (16k bytes),
which is noise in the output.
On typical sample session this can happen regularly.
This patch tries to detect and handle the situation. On the last block
that is dumped by the LBR dumper we always stop on the first branch. If
the block length is negative just scan forward to the first branch.
Otherwise scan until a branch is found.
The PT decoder already has a function that uses the instruction decoder
to detect branches, so we can just reuse it here.
Then when a terminating branch is found print an indication and stop
dumping. This might miss a few instructions, but at least shows no
runaway blocks.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20181120050617.4119-1-andi@firstfloor.org
[ Resolved conflict with dd2e18e9ac ("perf tools: Support 'srccode' output") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ondřej reported that when compiled with python3, the python extension
regresses in evlist.get_pollfd function behaviour.
The evlist.get_pollfd function creates file objects from evlist's fds
and returns them in a list. The python3 version also sets them to 'close
the original descriptor' when the object dies (is closed), by passing
True via the 'closefd' arg in the PyFile_FromFd call.
The python's closefd doc says:
If closefd is False, the underlying file descriptor will be kept open
when the file is closed.
That's why the following line in python3 closes all evlist fds:
evlist.get_pollfd()
the returned list is immediately destroyed and that takes down the
original events fds.
Passing closefd as False to PyFile_FromFd to fix this.
Reported-by: Ondřej Lysoněk <olysonek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 66dfdff03d ("perf tools: Add Python 3 support")
Link: http://lkml.kernel.org/r/20181226112121.5285-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The spelling of the SECCOMP is incorrect, fix these.
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Fixes: c65c83ffe9 ("perf trace: Allow asking for not suppressing common string prefixes")
Link: http://lkml.kernel.org/r/20181221084809.6108-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* Use common helpers, bitmap_zalloc() and kstrndup(), to replace open
coded versions.
* Clarify the comments around hotplug vs initial init case for the nfit
driver.
* Cleanup the libnvdimm init path.
Pull crypto updates from Herbert Xu:
"API:
- Add 1472-byte test to tcrypt for IPsec
- Reintroduced crypto stats interface with numerous changes
- Support incremental algorithm dumps
Algorithms:
- Add xchacha12/20
- Add nhpoly1305
- Add adiantum
- Add streebog hash
- Mark cts(cbc(aes)) as FIPS allowed
Drivers:
- Improve performance of arm64/chacha20
- Improve performance of x86/chacha20
- Add NEON-accelerated nhpoly1305
- Add SSE2 accelerated nhpoly1305
- Add AVX2 accelerated nhpoly1305
- Add support for 192/256-bit keys in gcmaes AVX
- Add SG support in gcmaes AVX
- ESN for inline IPsec tx in chcr
- Add support for CryptoCell 703 in ccree
- Add support for CryptoCell 713 in ccree
- Add SM4 support in ccree
- Add SM3 support in ccree
- Add support for chacha20 in caam/qi2
- Add support for chacha20 + poly1305 in caam/jr
- Add support for chacha20 + poly1305 in caam/qi2
- Add AEAD cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
crypto: skcipher - remove remnants of internal IV generators
crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
crypto: salsa20-generic - don't unnecessarily use atomic walk
crypto: skcipher - add might_sleep() to skcipher_walk_virt()
crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
crypto: cavium/nitrox - Added AEAD cipher support
crypto: mxc-scc - fix build warnings on ARM64
crypto: api - document missing stats member
crypto: user - remove unused dump functions
crypto: chelsio - Fix wrong error counter increments
crypto: chelsio - Reset counters on cxgb4 Detach
crypto: chelsio - Handle PCI shutdown event
crypto: chelsio - cleanup:send addr as value in function argument
crypto: chelsio - Use same value for both channel in single WR
crypto: chelsio - Swap location of AAD and IV sent in WR
crypto: chelsio - remove set but not used variable 'kctx_len'
crypto: ux500 - Use proper enum in hash_set_dma_transfer
crypto: ux500 - Use proper enum in cryp_set_dma_transfer
crypto: aesni - Add scatter/gather avx stubs, and use them in C
crypto: aesni - Introduce partial block macro
..
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
Notable changes:
- Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
- A large series adding support for pass-through of Nvidia V100 GPUs to guests
on Power9.
- Another large series to enable hardware assistance for TLB table walk on
MPC8xx CPUs.
- Some preparatory changes to our DMA code, to make way for further cleanups
from Christoph.
- Several fixes for our Transactional Memory handling discovered by fuzzing the
signal return path.
- Support for generating our system call table(s) from a text file like other
architectures.
- A fix to our page fault handler so that instead of generating a WARN_ON_ONCE,
user accesses of kernel addresses instead print a ratelimited and
appropriately scary warning.
- A cosmetic change to make our unhandled page fault messages more similar to
other arches and also more compact and informative.
- Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from dts
files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
some minor cleanup."
And many clean-ups, reworks and minor fixes etc.
Thanks to:
Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David
Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg
Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan
Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal
Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras,
Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell,
Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing.
-----BEGIN PGP SIGNATURE-----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=cr6s
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
- A large series adding support for pass-through of Nvidia V100 GPUs
to guests on Power9.
- Another large series to enable hardware assistance for TLB table
walk on MPC8xx CPUs.
- Some preparatory changes to our DMA code, to make way for further
cleanups from Christoph.
- Several fixes for our Transactional Memory handling discovered by
fuzzing the signal return path.
- Support for generating our system call table(s) from a text file
like other architectures.
- A fix to our page fault handler so that instead of generating a
WARN_ON_ONCE, user accesses of kernel addresses instead print a
ratelimited and appropriately scary warning.
- A cosmetic change to make our unhandled page fault messages more
similar to other arches and also more compact and informative.
- Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from
dts files, an 83xx watchdog handler, fixes to old dts interrupt
errors, and some minor cleanup."
And many clean-ups, reworks and minor fixes etc.
Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
Tang, Yue Haibing"
* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
powerpc/zImage: Also check for stdout-path
powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
macintosh: Use of_node_name_{eq, prefix} for node name comparisons
ide: Use of_node_name_eq for node name comparisons
powerpc: Use of_node_name_eq for node name comparisons
powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
powerpc/mm: Remove very old comment in hash-4k.h
powerpc/pseries: Fix node leak in update_lmb_associativity_index()
powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
powerpc/dts/fsl: Fix dtc-flagged interrupt errors
clk: qoriq: add more compatibles strings
powerpc/fsl: Use new clockgen binding
powerpc/83xx: handle machine check caused by watchdog timer
powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
vfio_pci: Allow regions to add own capabilities
vfio_pci: Allow mapping extra regions
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle on the kernel side:
- rework kprobes blacklist handling (Masami Hiramatsu)
- misc cleanups
on the tooling side these areas were the main focus:
- 'perf trace' enhancements (Arnaldo Carvalho de Melo)
- 'perf bench' enhancements (Davidlohr Bueso)
- 'perf record' enhancements (Alexey Budankov)
- 'perf annotate' enhancements (Jin Yao)
- 'perf top' enhancements (Jiri Olsa)
- Intel hw tracing enhancements (Adrian Hunter)
- ARM hw tracing enhancements (Leo Yan, Mathieu Poirier)
- ... plus lots of other enhancements, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (171 commits)
tools uapi asm: Update asm-generic/unistd.h copy
perf symbols: Relax checks on perf-PID.map ownership
perf trace: Wire up the fadvise 'advice' table generator
perf beauty: Add generator for fadvise64's 'advice' arg constants
tools headers uapi: Grab a copy of fadvise.h
perf beauty mmap: Print mmap's 'offset' arg in hexadecimal
perf beauty mmap: Print PROT_READ before PROT_EXEC to match strace output
perf trace beauty: Beautify arch_prctl()'s arguments
perf trace: When showing string prefixes show prefix + ??? for unknown entries
perf trace: Move strarrays to beauty.h for further reuse
perf beauty: Wire up the x86_arch prctl code table generator
perf beauty: Add a string table generator for x86's 'arch_prctl' codes
tools include arch: Grab a copy of x86's prctl.h
perf trace: Show NULL when syscall pointer args are 0
perf trace: Enclose the errno strings with ()
perf augmented_raw_syscalls: Copy 'access' arg as well
perf trace: Add alignment spaces after the closing parens
perf trace beauty: Print O_RDONLY when (flags & O_ACCMODE) == 0
perf trace: Allow asking for not suppressing common string prefixes
perf trace: Add a prefix member to the strarray class
...
Pull locking updates from Ingo Molnar:
"The main change in this cycle are initial preparatory bits of dynamic
lockdep keys support from Bart Van Assche.
There are also misc changes, a comment cleanup and a data structure
cleanup"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Clean up comment in nohz_idle_balance()
locking/lockdep: Stop using RCU primitives to access 'all_lock_classes'
locking/lockdep: Make concurrent lockdep_reset_lock() calls safe
locking/lockdep: Remove a superfluous INIT_LIST_HEAD() statement
locking/lockdep: Introduce lock_class_cache_is_registered()
locking/lockdep: Inline __lockdep_init_map()
locking/lockdep: Declare local symbols static
tools/lib/lockdep/tests: Test the lockdep_reset_lock() implementation
tools/lib/lockdep: Add dummy print_irqtrace_events() implementation
tools/lib/lockdep: Rename "trywlock" into "trywrlock"
tools/lib/lockdep/tests: Run lockdep tests a second time under Valgrind
tools/lib/lockdep/tests: Improve testing accuracy
tools/lib/lockdep/tests: Fix shellcheck warnings
tools/lib/lockdep/tests: Display compiler warning and error messages
locking/lockdep: Remove ::version from lock_class structure
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
single-stepping fixes, improved tracing, various timer and vGIC
fixes
* x86: Processor Tracing virtualization, STIBP support, some correctness fixes,
refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall,
reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone
functions, nested guest support for PAUSE filtering on AMD, more Hyper-V
enlightenments (direct mode for synthetic timers)
* PPC: nested VFIO
* s390: bugfixes only this time
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf
dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe
aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh
P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs
CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6
2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE=
=b4Jx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- selftests improvements
- large PUD support for HugeTLB
- single-stepping fixes
- improved tracing
- various timer and vGIC fixes
x86:
- Processor Tracing virtualization
- STIBP support
- some correctness fixes
- refactorings and splitting of vmx.c
- use the Hyper-V range TLB flush hypercall
- reduce order of vcpu struct
- WBNOINVD support
- do not use -ftrace for __noclone functions
- nested guest support for PAUSE filtering on AMD
- more Hyper-V enlightenments (direct mode for synthetic timers)
PPC:
- nested VFIO
s390:
- bugfixes only this time"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: x86: Add CPUID support for new instruction WBNOINVD
kvm: selftests: ucall: fix exit mmio address guessing
Revert "compiler-gcc: disable -ftracer for __noclone functions"
KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
KVM: Make kvm_set_spte_hva() return int
KVM: Replace old tlb flush function with new one to flush a specified range.
KVM/MMU: Add tlb flush with range helper function
KVM/VMX: Add hv tlb range flush support
x86/hyper-v: Add HvFlushGuestAddressList hypercall support
KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
KVM: x86: Disable Intel PT when VMXON in L1 guest
KVM: x86: Set intercept for Intel PT MSRs read/write
KVM: x86: Implement Intel PT MSRs read/write emulation
...
- Update the ACPICA code in the kernel to the 20181213 upstream
revision including:
* New Windows _OSI strings (Bob Moore, Jung-uk Kim).
* Buffers-to-string conversions update (Bob Moore).
* Removal of support for expressions in package elements (Bob
Moore).
* New option to display method/object evaluation in debug output
(Bob Moore).
* Compiler improvements (Bob Moore, Erik Schmauss).
* Minor debugger fix (Erik Schmauss).
* Disassembler improvement (Erik Schmauss).
* Assorted cleanups (Bob Moore, Colin Ian King, Erik Schmauss).
- Add support for a new OEM _OSI string to indicate special handling
of secondary graphics adapters on some systems (Alex Hung).
- Make it possible to build the ACPI subystem without PCI support
(Sinan Kaya).
- Make the SPCR table handling regard baud rate 0 in accordance with
the specification of it and make the DSDT override code support
DSDT code names generated by recent ACPICA (Andy Shevchenko, Wang
Dongsheng, Nathan Chancellor).
- Add clock frequency for Hisilicon Hip08 SPI controller to the ACPI
driver for AMD SoCs (APD) (Jay Fang).
- Fix the PM handling during device init in the ACPI driver for
Intel SoCs (LPSS) (Hans de Goede).
- Avoid double panic()s by clearing the APEI GHES block_status
before panic() (Lenny Szubowicz).
- Clean up a function invocation in the ACPI core and get rid of
some code duplication by using the DEFINE_SHOW_ATTRIBUTE macro
in the APEI support code (Alexey Dobriyan, Yangtao Li).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=yxXc
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to the 20181213 upstream
revision, make it possible to build the ACPI subsystem without PCI
support, and a new OEM _OSI string, add a new device support to the
ACPI driver for AMD SoCs and fix PM handling in the ACPI driver for
Intel SoCs, fix the SPCR table handling and do some assorted fixes and
cleanups.
Specifics:
- Update the ACPICA code in the kernel to the 20181213 upstream
revision including:
* New Windows _OSI strings (Bob Moore, Jung-uk Kim).
* Buffers-to-string conversions update (Bob Moore).
* Removal of support for expressions in package elements (Bob
Moore).
* New option to display method/object evaluation in debug output
(Bob Moore).
* Compiler improvements (Bob Moore, Erik Schmauss).
* Minor debugger fix (Erik Schmauss).
* Disassembler improvement (Erik Schmauss).
* Assorted cleanups (Bob Moore, Colin Ian King, Erik Schmauss).
- Add support for a new OEM _OSI string to indicate special handling
of secondary graphics adapters on some systems (Alex Hung).
- Make it possible to build the ACPI subystem without PCI support
(Sinan Kaya).
- Make the SPCR table handling regard baud rate 0 in accordance with
the specification of it and make the DSDT override code support
DSDT code names generated by recent ACPICA (Andy Shevchenko, Wang
Dongsheng, Nathan Chancellor).
- Add clock frequency for Hisilicon Hip08 SPI controller to the ACPI
driver for AMD SoCs (APD) (Jay Fang).
- Fix the PM handling during device init in the ACPI driver for Intel
SoCs (LPSS) (Hans de Goede).
- Avoid double panic()s by clearing the APEI GHES block_status before
panic() (Lenny Szubowicz).
- Clean up a function invocation in the ACPI core and get rid of some
code duplication by using the DEFINE_SHOW_ATTRIBUTE macro in the
APEI support code (Alexey Dobriyan, Yangtao Li)"
* tag 'acpi-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits)
ACPI / tables: Add an ifdef around amlcode and dsdt_amlcode
ACPI/APEI: Clear GHES block_status before panic()
ACPI: Make PCI slot detection driver depend on PCI
ACPI/IORT: Stub out ACS functions when CONFIG_PCI is not set
arm64: select ACPI PCI code only when both features are enabled
PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set
ACPICA: Remove PCI bits from ACPICA when CONFIG_PCI is unset
ACPI: Allow CONFIG_PCI to be unset for reboot
ACPI: Move PCI reset to a separate function
ACPI / OSI: Add OEM _OSI string to enable dGPU direct output
ACPI / tables: add DSDT AmlCode new declaration name support
ACPICA: Update version to 20181213
ACPICA: change coding style to match ACPICA, no functional change
ACPICA: Debug output: Add option to display method/object evaluation
ACPICA: disassembler: disassemble OEMx tables as AML
ACPICA: Add "Windows 2018.2" string in the _OSI support
ACPICA: Expressions in package elements are not supported
ACPICA: Update buffer-to-string conversions
ACPICA: add comments, no functional change
ACPICA: Remove defines that use deprecated flag
...
- Add sysadmin documentation for cpuidle (Rafael Wysocki).
- Make it possible to specify a cpuidle governor from kernel
command line, add new cpuidle state sysfs attributes for
governor evaluation, and improve the "polling" idle state
handling (Rafael Wysocki).
- Fix the handling of the "required-opps" DT property in the
operating performance points (OPP) framework, improve the
integration of it with the generic power domains (genpd)
framework, improve the handling of performance states in
them and clean up the idle states vs performance states
separation in genpd (Viresh Kumar, Ulf Hansson).
- Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using
a hardware engine to control CPU frequency transitions along
with DT bindings for it (Taniya Das).
- Fix an intel_pstate driver issue related to CPU offline and
update the documentation of it (Srinivas Pandruvada).
- Clean up the imx6q cpufreq driver (Anson Huang).
- Add SPDX license IDs to cpufreq schedutil governor files (Daniel
Lezcano).
- Switch over the runtime PM framework to using high-res timers
for device autosuspend to allow the control of it to be more
precise (Vincent Guittot).
- Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
don't prevent the system from reaching the target low-power state
and simplify the suspend-to-idle handling on ACPI platforms
without full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).
- Add system-wide suspend and resume support to the devfreq
framework (Lukasz Luba).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
Thomas Meyer).
- Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
macro in some places, fix some DT node refcount leaks, and do
some other janitorial cleanups (Yangtao Li).
- Update the cpupower, intel_pstate_tracer and turbosat utilities
(Abhishek Goel, Doug Smythies, Len Brown).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=WhM8
-----END PGP SIGNATURE-----
Merge tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add sysadmin documentation for cpuidle, extend the cpuidle
subsystem somewhat, improve the handling of performance states in the
generic power domains (genpd) and operating performance points (OPP)
frameworks, add a new cpufreq driver for Qualcomm SoCs, update some
other cpufreq drivers, switch over the runtime PM framework to using
high-res timers for device autosuspend, fix a problem with
suspend-to-idle on ACPI-based platforms, add system-wide suspend and
resume handling to the devfreq framework, do some janitorial cleanups
all over and update some utilities.
Specifics:
- Add sysadmin documentation for cpuidle (Rafael Wysocki).
- Make it possible to specify a cpuidle governor from kernel command
line, add new cpuidle state sysfs attributes for governor
evaluation, and improve the "polling" idle state handling (Rafael
Wysocki).
- Fix the handling of the "required-opps" DT property in the
operating performance points (OPP) framework, improve the
integration of it with the generic power domains (genpd) framework,
improve the handling of performance states in them and clean up the
idle states vs performance states separation in genpd (Viresh
Kumar, Ulf Hansson).
- Add a cpufreq driver called "qcom-hw" for Qualcomm SoCs using a
hardware engine to control CPU frequency transitions along with DT
bindings for it (Taniya Das).
- Fix an intel_pstate driver issue related to CPU offline and update
the documentation of it (Srinivas Pandruvada).
- Clean up the imx6q cpufreq driver (Anson Huang).
- Add SPDX license IDs to cpufreq schedutil governor files (Daniel
Lezcano).
- Switch over the runtime PM framework to using high-res timers for
device autosuspend to allow the control of it to be more precise
(Vincent Guittot).
- Disable non-wakeup ACPI GPEs during suspend-to-idle so that they
don't prevent the system from reaching the target low-power state
and simplify the suspend-to-idle handling on ACPI platforms without
full Low-Power S0 Idle (LPS0) support (Rafael Wysocki).
- Add system-wide suspend and resume support to the devfreq framework
(Lukasz Luba).
- Clean up the SmartReflex adaptive voltage scaling (AVS) driver and
add an SPDX license ID to it (Nishanth Menon, Uwe Kleine-König,
Thomas Meyer).
- Get rid of code duplication by using the DEFINE_SHOW_ATTRIBUTE
macro in some places, fix some DT node refcount leaks, and do some
other janitorial cleanups (Yangtao Li).
- Update the cpupower, intel_pstate_tracer and turbosat utilities
(Abhishek Goel, Doug Smythies, Len Brown)"
* tag 'pm-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
PM-runtime: Switch autosuspend over to using hrtimers
cpufreq: qcom-hw: Add support for QCOM cpufreq HW driver
dt-bindings: cpufreq: Introduce QCOM cpufreq firmware bindings
ACPI: PM: Loop in full LPS0 mode only
ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
tools/power turbostat: consolidate duplicate model numbers
tools/power turbostat: fix goldmont C-state limit decoding
PM / Domains: Propagate performance state updates
PM / Domains: Factorize dev_pm_genpd_set_performance_state()
PM / Domains: Save OPP table pointer in genpd
OPP: Don't return 0 on error from of_get_required_opp_performance_state()
OPP: Add dev_pm_opp_xlate_performance_state() helper
OPP: Improve _find_table_of_opp_np()
PM / Domains: Make genpd performance states orthogonal to the idlestates
PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
cpuidle: Add 'above' and 'below' idle state metrics
PM / AVS: SmartReflex: Switch to SPDX Licence ID
PM / AVS: SmartReflex: NULL check before some freeing functions is not needed
...
Adding test support for new Intel DSM from v1.8. The ability of simulating
master passphrase update and master secure erase have been added to
nfit_test.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the implementation of Intel NVDIMM DSM overwrite, we are adding unit
test to nfit_test for testing of overwrite operation.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add nfit_test support for DSM functions "Get Security State",
"Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Lock",
and "Secure Erase" for the fake DIMMs.
Also adding a sysfs knob in order to put the DIMMs in "locked" state. The
order of testing DIMM unlocking would be.
1a. Disable DIMM X.
1b. Set Passphrase to DIMM X.
2. Write to
/sys/devices/platform/nfit_test.0/nfit_test_dimm/test_dimmX/lock_dimm
3. Renable DIMM X
4. Check DIMM X state via sysfs "security" attribute for nmemX.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Minor fallout from merge resolution, test_verifier was segfaulting
because the REJECT result was correct, but errstr was NULL. Properly
fix it as in 339bbff2d6.
Fixes: 339bbff2d6 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix two more bugs in the exit_mmio address guessing.
The first bug was that the start and step calculations were
wrong since they were dividing the number of address bits instead
of the address space. The second other bug was that the guessing
algorithm wasn't considering the valid physical and virtual address
ranges correctly for an identity map.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We shouldn't hardcode the size of the tracepoint common_ fields, use the
offset of the 'id'/'__syscallnr' field in the sys_enter event instead.
This caused the augmented syscalls code to fail on a particular build of a
PREEMPT_RT_FULL kernel where these extra 'common_migrate_disable' and
'common_padding' fields were before the syscall id one:
# cat /sys/kernel/debug/tracing/events/raw_syscalls/sys_enter/format
name: sys_enter
ID: 22
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:unsigned short common_migrate_disable; offset:8; size:2; signed:0;
field:unsigned short common_padding; offset:10; size:2; signed:0;
field:long id; offset:16; size:8; signed:1;
field:unsigned long args[6]; offset:24; size:48; signed:0;
print fmt: "NR %ld (%lx, %lx, %lx, %lx, %lx, %lx)", REC->id, REC->args[0], REC->args[1], REC->args[2], REC->args[3], REC->args[4], REC->args[5]
#
All those 'common_' prefixed fields are zeroed when they hit a BPF tracepoint
hook, we better just discard those, i.e. somehow pass an offset to the
BPF program from the start of the ctx and make adjustments in the 'perf trace'
handlers to adjust the offset of the syscall arg offsets obtained from tracefs.
Till then, fix it the quick way and add this to the augmented_raw_syscalls.c to
bet it to work in such kernels:
diff --git a/tools/perf/examples/bpf/augmented_raw_syscalls.c b/tools/perf/examples/bpf/augmented_raw_syscalls.c
index 53c233370fae..1f746f931e13 100644
--- a/tools/perf/examples/bpf/augmented_raw_syscalls.c
+++ b/tools/perf/examples/bpf/augmented_raw_syscalls.c
@@ -38,12 +38,14 @@ struct bpf_map SEC("maps") syscalls = {
struct syscall_enter_args {
unsigned long long common_tp_fields;
+ long rt_common_tp_fields;
long syscall_nr;
unsigned long args[6];
};
struct syscall_exit_args {
unsigned long long common_tp_fields;
+ long rt_common_tp_fields;
long syscall_nr;
long ret;
};
Just to check that this was the case. Fix it properly later, for now remove the
hardcoding of the offset in the 'perf trace' side and document the situation
with this patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2pqavrktqkliu5b9nzouio21@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current libbfd feature test unconditionally links against -liberty and -lz.
While it's required on some systems (e.g. opensuse), it's completely
unnecessary on the others, where only -lbdf is sufficient (debian).
This patch streamlines (and renames) the following feature checks:
feature-libbfd - only link against -lbfd (debian),
see commit 2cf9040714 ("perf tools: Fix bfd
dependency libraries detection")
feature-libbfd-liberty - link against -lbfd and -liberty
feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse),
see commit 280e7c48c3 ("perf tools: fix BFD
detection on opensuse")
(feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z}
for clarity)
The main motivation is to fix this feature test for bpftool which is
currently broken on debian (libbfd feature shows OFF, but we still
unconditionally link against -lbfd and it works).
Tested on debian with only -lbfd installed (without -liberty); I'd
appreciate if somebody on the other systems can test this new detection
method.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While updating 'perf trace' on an machine with an old precompiled
augmented_raw_syscalls.o that didn't setup the syscall map the new 'perf
trace' codebase notices the augmented_raw_syscalls.o eBPF event, decides
to use it instead of the old raw_syscalls:sys_{enter,exit} method, but
then because we don't have the syscall map tries to set the tracepoint
filter on the sys_{enter,exit} evsels, that are NULL, segfaulting.
Make the code more robust by checking it those tracepoints have
their respective evsels in place before trying to set the tp filter.
With this we still get everything to work, just not setting up the
syscall filters, which is better than a segfault. Now to update the
precompiled augmented_raw_syscalls.o and continue development :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3ft5rjdl05wgz2pwpx2z8btu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When KVM has KVM_CAP_ARM_VM_IPA_SIZE we can test with > 40-bit IPAs by
using the 'type' field of KVM_CREATE_VM.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
We need to reset the offset for each mode as it will change
depending on the number of guest physical address bits.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
There's no reason not to always test the topmost physical
addresses, and if the user wants to try lower addresses
then '-p' (used to be '-o before this patch) can be used.
Let's remove the '-t' option and just always do what it did.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
It isn't necessary and can even cause problems when testing high
guest physical addresses. This patch leaves the test memory id-
mapped by default, but when using '-t' the test memory virtual
addresses stay the same even though the physical addresses switch
to the topmost valid addresses.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
When we get a report like
==== Test Assertion Failure ====
x86_64/state_test.c:157: run->exit_reason == KVM_EXIT_IO
pid=955 tid=955 - Success
1 0x0000000000401350: main at state_test.c:154
2 0x00007fc31c9e9412: ?? ??:0
3 0x000000000040159d: _start at ??:?
Unexpected exit reason: 8 (SHUTDOWN),
it is not obvious which particular stage failed. Add the info.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* acpica:
ACPICA: Update version to 20181213
ACPICA: change coding style to match ACPICA, no functional change
ACPICA: Debug output: Add option to display method/object evaluation
ACPICA: disassembler: disassemble OEMx tables as AML
ACPICA: Add "Windows 2018.2" string in the _OSI support
ACPICA: Expressions in package elements are not supported
ACPICA: Update buffer-to-string conversions
ACPICA: add comments, no functional change
ACPICA: Remove defines that use deprecated flag
ACPICA: Add "Windows 2018" string in the _OSI support
ACPICA: Update version to 20181031
ACPICA: iASL: Enhance error detection
ACPICA: iASL: adding definition and disassembly for TPM2 revision 3
ACPICA: Use %d for signed int print formatting instead of %u
ACPICA: Debugger: refactor to fix unused variable warning
This is a new test case that creates a signal and starts a suspended
transaction inside the signal handler.
It returns from the signal handler with the CPU at suspended state, but
without setting user context MSR Transaction State (TS) field.
The kernel signal handler code should be able to handle this discrepancy
instead of crashing.
This code could be compiled and used to test 32 and 64-bits signal
handlers.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Clang does not recognize that calls to error() terminate execution
and complains about uninitialized variable use that happens after calls
to error(). This noop patchset fixes this.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-21
The following pull-request contains BPF updates for your *net-next* tree.
There is a merge conflict in test_verifier.c. Result looks as follows:
[...]
},
{
"calls: cross frame pruning",
.insns = {
[...]
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "function calls to other bpf functions are allowed for root only",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
{
"jset: functional",
.insns = {
[...]
{
"jset: unknown const compare not taken",
.insns = {
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_get_prandom_u32),
BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
BPF_EXIT_INSN(),
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "!read_ok",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
[...]
{
"jset: range",
.insns = {
[...]
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.result_unpriv = ACCEPT,
.result = ACCEPT,
},
The main changes are:
1) Various BTF related improvements in order to get line info
working. Meaning, verifier will now annotate the corresponding
BPF C code to the error log, from Martin and Yonghong.
2) Implement support for raw BPF tracepoints in modules, from Matt.
3) Add several improvements to verifier state logic, namely speeding
up stacksafe check, optimizations for stack state equivalence
test and safety checks for liveness analysis, from Alexei.
4) Teach verifier to make use of BPF_JSET instruction, add several
test cases to kselftests and remove nfp specific JSET optimization
now that verifier has awareness, from Jakub.
5) Improve BPF verifier's slot_type marking logic in order to
allow more stack slot sharing, from Jiong.
6) Add sk_msg->size member for context access and add set of fixes
and improvements to make sock_map with kTLS usable with openssl
based applications, from John.
7) Several cleanups and documentation updates in bpftool as well as
auto-mount of tracefs for "bpftool prog tracelog" command,
from Quentin.
8) Include sub-program tags from now on in bpf_prog_info in order to
have a reliable way for user space to get all tags of the program
e.g. needed for kallsyms correlation, from Song.
9) Add BTF annotations for cgroup_local_storage BPF maps and
implement bpf fs pretty print support, from Roman.
10) Fix bpftool in order to allow for cross-compilation, from Ivan.
11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
to be compatible with libbfd and allow for Debian packaging,
from Jakub.
12) Remove an obsolete prog->aux sanitation in dump and get rid of
version check for prog load, from Daniel.
13) Fix a memory leak in libbpf's line info handling, from Prashant.
14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
does not get unaligned, from Jesper.
15) Fix test_progs kselftest to work with older compilers which are less
smart in optimizing (and thus throwing build error), from Stanislav.
16) Cleanup and simplify AF_XDP socket teardown, from Björn.
17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
to netns_id argument, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Run the transmit timestamp tests as part of kselftests.
Add a txtimestamp.sh test script that runs most variants:
ipv4/ipv6, tcp/udp/raw/raw_ipproto/pf_packet, data/nodata,
setsockopt/cmsg. The script runs tests with netem delays.
Refine txtimestamp.c to validate results. Take expected
netem delays as input and compare against real timestamps.
To run without dependencies, add a listener socket to be
able to connect in the case of TCP.
Add the timestamping directory to the kselftests Makefile.
Build all the binaries. Only run verified txtimestamp.sh.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand the transmit timestamp regression test with support for
missing protocols: ipv6 datagram and raw and pf_packet.
Also refine resolve_hostname to independently request AF_INET or
AF_INET6 addresses. Else, ipv4 addresses may be returned as AF_INET6.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 3dd17e63f5 ("sock: accept SO_TIMESTAMPING flags in socket
cmsg") added support for passing tx timestamping options per-call
in sendmsg.
Expand the txtimestamp test with support for this feature.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without previous patch a warning would be generated upon multipath route
get when FIB multipath hash policy is to use a 5-tuple for multipath
hash calculation.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patches made it possible to setup VLAN devices with VID 1 over
mlxsw ports. Verify this functionality actually works by conducting a
simple router test over VID 1.
Adding this test as a generic test since it can be run using veth pairs
and it can also be useful for other physical devices where VID 1 was
considered reserved (knowingly or not).
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patches made it possible to create VLAN devices with VID 1 over
mlxsw ports. Adjust the test to verify such an operation succeeds.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patch added the ability to offload a VXLAN tunnel used for L3
VNI when it is present in the VLAN-aware bridge before the corresponding
VLAN interface is configured. This patch adds a test case to verify
that.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the test to ensure reads past the end of the sk_msg_md
data structure fail is incorrectly expecting success. Fix this
typo and use correct expected error.
Fixes: 945a47d87c ("bpf: sk_msg, add tests for size field")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 435f90a338 ("selftests/bpf: add a test case for sock_ops
perf-event notification") missed adding new test to gitignore.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Validate that the verifier reasons correctly about the bounds
and removes dead code based on results of JSET instruction.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We seem to have no JSET instruction test, and LLVM does not
generate it at all, so let's add a simple hand-coded test
to make sure JIT implementations are correct.
v2:
- extend test_verifier to handle multiple inputs and
add the sample there (Daniel)
- add a sign extension case
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On each sample, Sample Instruction Event Register (SIER) content
is saved in pt_regs. SIER does not have a entry as-is in the pt_regs
but instead, SIER content is saved in the "dar" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the "SIER"
printing which internally maps to the "dar" of pt_regs.
It also check for the SIER availability in the platform and present
value accordingly
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull networking fixes from David Miller:
1) Off by one in netlink parsing of mac802154_hwsim, from Alexander
Aring.
2) nf_tables RCU usage fix from Taehee Yoo.
3) Flow dissector needs nhoff and thoff clamping, from Stanislav
Fomichev.
4) Missing sin6_flowinfo initialization in SCTP, from Xin Long.
5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva.
6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit.
7) Fix SKB leak in rtlwifi, from Larry Finger.
8) Fix state pruning in bpf verifier, from Jakub Kicinski.
9) Don't handle completely duplicate fragments as overlapping, from
Michal Kubecek.
10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula.
11) Fix TCP fallback socket release in smc, from Myungho Jung.
12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits)
rds: Fix warning.
neighbor: NTF_PROXY is a valid ndm_flag for a dump request
net: mvpp2: fix the phylink mode validation
net/sched: cls_flower: Remove old entries from rhashtable
net/tls: allocate tls context using GFP_ATOMIC
iptunnel: make TUNNEL_FLAGS available in uapi
gro_cell: add napi_disable in gro_cells_destroy
lan743x: Remove MAC Reset from initialization
net/mlx5e: Remove the false indication of software timestamping support
net/mlx5: Typo fix in del_sw_hw_rule
net/mlx5e: RX, Fix wrong early return in receive queue poll
ipv6: explicitly initialize udp6_addr in udp_sock_create6()
bnxt_en: Fix ethtool self-test loopback.
net/rds: remove user triggered WARN_ON in rds_sendmsg
net/rds: fix warn in rds_message_alloc_sgs
ath10k: skip sending quiet mode cmd for WCN3990
mac80211: free skb fraglist before freeing the skb
nl80211: fix memory leak if validate_pae_over_nl80211() fails
net/smc: fix TCP fallback socket release
vxge: ensure data0 is initialized in when fetching firmware version information
...
This patch refactors reuseport_add_any selftest a bit:
- makes it more modular (eliminates several copy/pasted blocks);
- skips DCCP tests if DCCP is not supported
V2: added "Signed-off-by" tag.
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a BPF_LD_IMM64 case to the line_info test
to ensure the kernel rejects linfo_info.insn_off pointing
to the 2nd 8 bytes of the BPF_LD_IMM64.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows transparent cross-compilation with CROSS_COMPILE by
relying on 7ed1c1901f ("tools: fix cross-compile var clobbering").
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new test that is focused on rtnetlink configuration. Its purpose
is to test valid and invalid (as deemed by mlxsw) configurations and
make sure that they succeed / fail without producing a trace.
Some of the test cases are derived from recent fixes in order to make
sure that the fixed bugs are not introduced again.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test to exercise the fix from the previous patch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds tests to read the size field to test_verifier.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the size field to sk_msg_md for tools.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Verifier is supposed to support sharing stack slot allocated to ptr with
SCALAR_VALUE for privileged program. However this doesn't happen for some
cases.
The reason is verifier is not clearing slot_type STACK_SPILL for all bytes,
it only clears part of them, while verifier is using:
slot_type[0] == STACK_SPILL
as a convention to check one slot is ptr type.
So, the consequence of partial clearing slot_type is verifier could treat a
partially overridden ptr slot, which should now be a SCALAR_VALUE slot,
still as ptr slot, and rejects some valid programs.
Before this patch, test_xdp_noinline.o under bpf selftests, bpf_lxc.o and
bpf_netdev.o under Cilium bpf repo, when built with -mattr=+alu32 are
rejected due to this issue. After this patch, they all accepted.
There is no processed insn number change before and after this patch on
Cilium bpf programs.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To get the change in:
b7d624ab43 ("asm-generic: unistd.h: fixup broken macro include.")
That doesn't imply in any changes in the tools.
This silences the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Guo Ren <ren_guo@c-sky.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2e7xwm5i2qcc88jp2lyawdyd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are simple enough, and usually not produced by root, instead by
whatever user is running java, rust, Node.js JIT code that end up
generating those /tmp/perf-PID.map for resolution of symbols in the
anonymous executable maps.
Having to use --force to resolve symbols in 'perf top' is a distraction,
as recently I experienced when node.js symbols were not being resolved
by 'perf top'.
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Hítalo Silva <hitalos@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/n/tip-tk2jgo2v4v2yjuj28axbpppo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used to generate the string table for fadvise64's 'advice'
argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-muswpnft8q9krktv052yrgsc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Also to make it match 'strace' output, for regression testing.
Both now produce this option, when 'perf trace' uses a .perfconfig
asking for the strace like output:
mmap(0x7faf66e6a000, 1363968, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7faf66e6a000
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-27qhouo1kaac2iyl85nfnsf5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Helps with comparing 'strace' and 'perf trace' output, for mutual
regression testing.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-va0qe95xbhep5hy52aq5qe0v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This actually so far, AFAIK is available only in x86, so the code was
put in place with x86 prefixes, in arches where it is not available it
will just not be called, so no further mechanisms are needed at this
time.
Later, when other arches wire this up, we'll just look at the uname
(live sessions) or perf_env data in the perf.data header to auto-wire
the right beautifier.
With this the output is the same as produced by 'strace' when used with
the following ~/.perfconfig:
# cat ~/.perfconfig
[llvm]
dump-obj = true
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = -40
show_prefix = yes
#
And, on fedora 29, since the string tables are generated from the kernel
sources, we don't know about 0x3001, just like strace:
--- /tmp/strace 2018-12-17 11:22:08.707586721 -0300
+++ /tmp/trace 2018-12-18 11:11:32.037512729 -0300
@@ -1,49 +1,49 @@
-arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument)
+arch_prctl(0x3001 /* ARCH_??? */, 0x7ffe4eb93ae0) = -1 EINVAL (Invalid argument)
-arch_prctl(ARCH_SET_FS, 0x7faf6700f540) = 0
+arch_prctl(ARCH_SET_FS, 0x7fb507364540) = 0
And that seems to be related to the CET/Shadow Stack feature, that
userland in Fedora 29 (glibc 2.28) are querying the kernel about, that
0x3001 seems to be ARCH_CET_STATUS, I'll check the situation and test
with a fedora 29 kernel to see if the other codes are used.
A diff that ignores the different pointers for different runs needs to
be put in place in the upcoming regression tests comparing 'perf trace's
output to strace's.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-73a9prs8ktkrt97trtdmdjs8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match 'strace' output, like in:
arch_prctl(0x3001 /* ARCH_??? */, 0x7ffc8a92dc80) = -1 EINVAL (Invalid argument)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kx59j2dk5l1x04ou57mt99ck@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll use it in the upcoming arch_prctl() 'code' arg beautifier.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6e4tj2fjen8qa73gy4u49vav@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need it to generate the tables for the 'code' arch_prctl's syscall
argument.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vu890pi18fpd4eyz61cazckj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Matching strace's output format. The 'format' file for the syscall
tracepoints have an indication if the arg is a pointer, with some
exceptions like 'mmap' that has its first arg as an 'unsigned long', so
use a heuristic using the argument name, i.e. if it contains the 'addr'
substring, format it with the pointer formatter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ddghemr8qrm6i0sb8awznbze@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match strace, now both emit the same line for calls like:
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-krxl6klsqc9qyktoaxyih942@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will all come from userspace, but to test the changes to make 'perf
trace' output similar to strace's, do this one more now manually.
To update the precompiled augmented_raw_syscalls.o binary I just run:
# perf record -e ~acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB perf.data ]
#
Because to have augmented_raw_syscalls to be always used and a fast
startup and remove the need to have the llvm toolchain installed, I'm
using:
# perf config | grep add_events
trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
So when doing changes to augmented_raw_syscals.c one needs to rebuild
the .o file.
This will be done automagically later, i.e. have a 'make' behaviour of
recompiling when the .c gets changed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-lw3i2atyq8549fpqwmszn3qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To use strace's style, helping in comparing the output of 'perf trace'
with the one from 'strace', to help in upcoming regression tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-mw6peotz4n84rga0fk78buff@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And there are more flags, to match strace's output.
openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
Also to help with regression tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ofovpmvdli3bwch30936xn7t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the user, in an upcoming patch, can select printing it to get
the full string as used in the source code, not one with a common prefix
chopped off so as to make the output more compact.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zypczc88gzbmeqx7b372s138@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match 'strace' output, helping with upcoming regression tests
comparing both outputs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-jab52t1dcuh6vlztqle9g7u9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-12-18
1) Add xfrm policy selftest scripts.
From Florian Westphal.
2) Split inexact policies into four different search list
classes and use the rbtree infrastructure to store/lookup
the policies. This is to improve the policy lookup
performance after the flowcache removal.
Patches from Florian Westphal.
3) Various coding style fixes, from Colin Ian King.
4) Fix policy lookup logic after adding the inexact policy
search tree infrastructure. From Florian Westphal.
5) Remove a useless remove BUG_ON from xfrm6_dst_ifdown.
From Li RongQing.
6) Use the correct policy direction for lookups on hash
rebuilding. From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull turbostat utility updates for v4.21 from Len Brown:
"A couple of random fixes that were sitting in the queue."
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: consolidate duplicate model numbers
tools/power turbostat: fix goldmont C-state limit decoding
tools/power turbostat: reduce debug output
tools/power turbosat: fix AMD APIC-id output
I.f. if children should inherit the parent perf_event configuration,
i.e. if we should trace children as well or just the parent.
The default is to follow children, to disable this and have a behaviour
similar to strace, set this config option or use the --no_inherit 'perf
trace' option.
E.g.:
Default:
# perf config trace.no_inherit
# trace -e clone,*sleep time sleep 1
0.000 time/21107 clone(clone_flags: CHILD_CLEARTID|CHILD_SETTID|0x11, newsp: 0, child_tidptr: 0x7f7b8f9ae810) = 21108 (time)
? time/21108 ... [continued]: clone()
0.691 sleep/21108 nanosleep(rqtp: 0x7ffed01d0540, rmtp: 0 ) = 0
0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 1988maxresident)k
0inputs+0outputs (0major+76minor)pagefaults 0swaps
#
Disable it:
# trace -e clone,*sleep time sleep 1
0.000 clone(clone_flags: CHILD_CLEARTID|CHILD_SETTID|0x11, newsp: 0, child_tidptr: 0x7ff41e100810) = 21414 (time)
0.00user 0.00system 0:01.00elapsed 0%CPU (0avgtext+0avgdata 1964maxresident)k
0inputs+0outputs (0major+76minor)pagefaults 0swaps
#
Notice that since there is just one thread, the "comm/TID" column is
suppressed.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-thd8s16pagyza71ufi5vjlan@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More convenient thah having to recall what letter is about
showing/listing/dumping the configuration, i.e. no arguments means
-l/--list:
# perf config
llvm.dump-obj=true
trace.default_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
# perf config -l
llvm.dump-obj=true
trace.default_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
trace.show_zeros=yes
trace.show_duration=no
# perf config -h
Usage: perf config [<file-option>] [options] [section.name[=value] ...]
-l, --list show current config variables
--system use system config file
--user use user config file
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-z2n63avz6tliqb5gmu4l1dti@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default so far, since we show argument names followed by its values,
was to make the output more compact by suppressing most zeroed args.
Make this configurable so that users can choose what best suit their
needs.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q0gxws02ygodh94o0hzim5xd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To add augmented_raw_syscalls to the events speficied by the user, or be
the only one if no events were specified by the user, one can add this
to perfconfig:
# cat ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
I.e. pre-compile the augmented_raw_syscalls.c BPF program and make it
always load, this way:
# perf trace -e open* cat /etc/passwd > /dev/null
0.000 ( 0.013 ms): cat/31557 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
0.035 ( 0.007 ms): cat/31557 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
0.353 ( 0.009 ms): cat/31557 openat(dfd: CWD, filename: /usr/lib/locale/locale-archive, flags: CLOEXEC) = 3
0.424 ( 0.006 ms): cat/31557 openat(dfd: CWD, filename: /etc/passwd) = 3
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0lgj7vh64hg3ce44gsmvj7ud@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using that puts() thing, and thus we don't need to define the
__bpf_stdout__ map, reducing the setup time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3452xgatncpil7v22minkwbo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The exception packet appears as one element with 'elem_type' ==
OCSD_GEN_TRC_ELEM_EXCEPTION or OCSD_GEN_TRC_ELEM_EXCEPTION_RET, which is
present for exception entry and exit respectively. The decoder sets the
packet fields 'packet->exc' and 'packet->exc_ret' to indicate the
exception packets; but exception packets don't have a dedicated sample
type and shares the same sample type CS_ETM_RANGE with normal
instruction packets.
As a result, the exception packets are taken as normal instruction
packets and this introduces confusion in mixing different packet types.
Furthermore, these instruction range packets will be processed for
branch samples only when 'packet->last_instr_taken_branch' is true,
otherwise they will be omitted, this can introduce a mess for exception
and exception returning due to not having the complete address range
info for context switching.
To process exception packets properly, this patch introduces two new
sample types: CS_ETM_EXCEPTION and CS_ETM_EXCEPTION_RET; these two types
of packets will be handled by cs_etm__exception(). The function
cs_etm__exception() forces setting the previous CS_ETM_RANGE packet flag
'prev_packet->last_instr_taken_branch' to true, this matches well with
the program flow when the exception is trapped from user space to kernel
space, no matter if the most recent flow has branch taken or not; this
is also safe for returning to user space after exception handling.
After exception packets have their own sample type, the packet fields
'packet->exc' and 'packet->exc_ret' aren't needed anymore, so remove
them.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-9-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the decoder outputs an EO_TRACE element, it means the end of the
trace buffer; this is a discontinuity and in this case the end of trace
data needs to be saved.
This patch generates a CS_ETM_DISCONTINUITY packet for the EO_TRACE
element hereby flushing the end of trace data in cs-etm.c.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-8-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The CoreSight tracer driver might insert barrier packets between
different buffers, thus the decoder can spot the boundaries based on the
barrier packet; it is possible for the decoder to hit a barrier packet
and emit a NO_SYNC element, then the decoder will find a periodic
synchronisation point inside that next trace block that starts the trace
again but does not have the TRACE_ON element as indicator - usually
because this trace block has wrapped the buffer so we have lost the
original point when the trace was enabled.
In the first case it causes the insertion of a OCSD_GEN_TRC_ELEM_NO_SYNC
in the middle of the tracing stream, but as we were not handling the
NO_SYNC element properly this ends up making users miss the
discontinuity indications.
Though OCSD_GEN_TRC_ELEM_NO_SYNC is different from CS_ETM_TRACE_ON when
output from the decoder, both indicate that the trace data is
discontinuous; this patch treats OCSD_GEN_TRC_ELEM_NO_SYNC as a trace
discontinuity and generates a CS_ETM_DISCONTINUITY packet for it, so
cs-etm can handle the discontinuity for this case, finally it saves the
last trace data for the previous trace block and restart samples for the
new block.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-7-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TRACE_ON element is used at the beginning of trace, it also can be
appeared in the middle of trace data to indicate discontinuity; for
example, it's possible to see multiple TRACE_ON elements in the trace
stream if the trace is being limited by address range filtering.
Furthermore, except TRACE_ON element is for discontinuity, NO_SYNC and
EO_TRACE also can be used to indicate discontinuity, though they are
used for different scenarios for which the trace is interrupted.
This patch renames sample type CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY,
firstly the new name describes more closely the purpose of the packet;
secondly this is a preparation for other output elements which also
cause the trace discontinuity thus they can share the same one packet
type.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-6-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The values in enumeration cs_etm_sample_type are defined with setting
bit N for each packet type, this is not suggested in the usual case.
This patch refactor cs_etm_sample_type by converting from bit shifting
values to continuous numbers.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-5-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cs_etm_decoder::trace_on is being assigned when TRACE_ON or NO_SYNC
element is coming, but it is never used hence it is redundant and can
be removed.
So let's remove 'trace_on' field from cs_etm_decoder struct.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-4-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At the end of trace buffer handling, function cs_etm__flush() is invoked
to flush any remaining branch stack entries. As a side effect, it also
generates branch sample, because the 'etmq->packet' doesn't contains any
new coming packet but point to one stale packet after packets swapping,
so it wrongly makes synthesize branch samples with stale packet info.
We could review below detailed flow which causes issue:
Packet1: start_addr=0xffff000008b1fbf0 end_addr=0xffff000008b1fbfc
Packet2: start_addr=0xffff000008b1fb5c end_addr=0xffff000008b1fb6c
step 1: cs_etm__sample():
sample: ip=(0xffff000008b1fbfc-4) addr=0xffff000008b1fb5c
step 2: flush packet in cs_etm__run_decoder():
cs_etm__run_decoder()
`-> err = cs_etm__flush(etmq, false);
sample: ip=(0xffff000008b1fb6c-4) addr=0xffff000008b1fbf0
Packet1 and packet2 are two continuous packets, when packet2 is the new
coming packet, cs_etm__sample() generates branch sample for these two
packets and use [packet1::end_addr - 4 => packet2::start_addr] as branch
jump flow, thus we can see the first generated branch sample in step 1.
At the end of cs_etm__sample() it swaps packets so 'etm->prev_packet'=
packet2 and 'etm->packet'=packet1, so far it's okay for branch sample.
If packet2 is the last one packet in trace buffer, even there have no
any new coming packet, cs_etm__run_decoder() invokes cs_etm__flush() to
flush branch stack entries as expected, but it also generates branch
samples by taking 'etm->packet' as a new coming packet, thus the branch
jump flow is as [packet2::end_addr - 4 => packet1::start_addr]; this
is the second sample which is generated in step 2. So actually the
second sample is a stale sample and we should not generate it.
This patch introduces a new function cs_etm__end_block(), at the end of
trace block this function is invoked to only flush branch stack entries
and thus can avoid to generate branch sample for stale packet.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The structure cs_etm_queue uses 'prev_packet' to point to previous
packet, this can be used to combine with new coming packet to generate
samples.
In function cs_etm__flush() it swaps packets only when the flag
'etm->synth_opts.last_branch' is true, this means that it will not swap
packets if without option '--itrace=il' to generate last branch entries;
thus for this case the 'prev_packet' doesn't point to the correct
previous packet and the stale packet still will be used to generate
sequential sample. Thus if dump trace with 'perf script' command we can
see the incorrect flow with the stale packet's address info.
This patch corrects packets swapping in cs_etm__flush(); except using
the flag 'etm->synth_opts.last_branch' it also checks the another flag
'etm->sample_branches', if any flag is true then it swaps packets so can
save correct content to 'prev_packet'. Finally this can fix the wrong
program flow dumping issue.
The patch has a minor refactoring to use 'etm->synth_opts.last_branch'
instead of 'etmq->etm->synth_opts.last_branch' for condition checking,
this is consistent with that is done in cs_etm__sample().
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1544513908-16805-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vac4sn1ns1vj4y07lzj7y4b8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We'll start adding more perf-syscall stuff, so lets do this prep step so
that the next ones are just about adding more fields.
Run it with the .c file once to cache the .o file:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.c
LLVM: dumping augmented_raw_syscalls.o
0.000 ( 0.021 ms): tmux: server/4952 openat(dfd: CWD, filename: /proc/5691/cmdline ) = 11
349.807 ( 0.040 ms): DNS Res~er #39/11082 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
4988.759 ( 0.052 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
4988.976 ( 0.029 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18
^C[root@quaco bpf]#
From now on, we can use just the newly built .o file, skipping the
compilation step for a faster startup:
# trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.o
0.000 ( 0.046 ms): DNS Res~er #39/11088 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44
1946.408 ( 0.190 ms): systemd/1 openat(dfd: CWD, filename: /proc/1071/cgroup, flags: CLOEXEC ) = 20
1946.792 ( 0.215 ms): systemd/1 openat(dfd: CWD, filename: /proc/954/cgroup, flags: CLOEXEC ) = 20
^C#
Now on to do the same in the builtin-trace.c side of things.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-k8mwu04l8es29rje5loq9vg7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't always carry that __bpf_output__ map, leaving that to
the scripts wanting to use that facility.
'perf trace' will be changed to look if that map is present and only
setup the bpf-output events if so.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-azwys8irxqx9053vpajr0k5h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with
one bool per syscall, stating if it should be filtered or not.
So, with a pre-built augmented_raw_syscalls.o file, we use:
# perf trace -e open*,augmented_raw_syscalls.o
0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138
187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11
187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11
284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167
^C#
What is it that this gsd-housekeeping thingy needs to open
/proc/self/mountinfo four times periodically? :-)
This map will be extended to tell per-syscall parameters, i.e. how many
bytes to copy per arg, using the function signature to get the types and
then the size of those types, via BTF.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So when we do something like:
# perf trace -e open*,augmented_raw_syscalls.o
We need to set trace->trace_syscalls because there is logic that use
that when mixing strace-like output with other events, such as scheduler
tracepoints, but with that set we ended up having multiple
raw_syscalls:sys_{enter,exit} setup, which garbled the output, so
check if trace->augmented_raw_syscalls is set and avoid the two extra
tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kjmnbrlgu0c38co1ye8egbsb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it to trace__set_ev_qualifier_tp_filter(), as this just sets up
tracepoint filters on the raw_syscalls:sys_{enter,exit} tracepoints, and
since we're going to do the same for the augmented_raw_syscalls
codepath, when used, rename it to clarify.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8bjsul8x7osw7nxjodnyfn14@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So we could propagate distro flags into libperf-jvmti.so library.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20181212132940.840-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the user can specify outside LDFLAGS values.
Keeping the CFLAGS in there as well, so we don't break existing scripts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Link: http://lkml.kernel.org/r/20181212091214.GC17489@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid this warning:
CC /tmp/build/perf/util/s390-cpumsf.o
util/s390-cpumsf.c: In function 's390_cpumsf_samples':
util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=]
pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n",
^
Now the various Android cross toolchains used in the perf tools
container test builds are all clean and we can remove this:
export EXTRA_MAKE_ARGS="WERROR=0"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are systems such as the Android NDK API level 24 has the
open_memstream() function but doesn't provide a prototype, adding noise
to the build:
builtin-timechart.c: In function 'cat_backtrace':
builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration]
FILE *f = open_memstream(&p, &p_len);
^
builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs]
builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast
FILE *f = open_memstream(&p, &p_len);
^
Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that
can get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/stdio.h#241
FILE* open_memstream(char** __ptr, size_t* __size_ptr) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-343ashae97e5bq6vizusyfno@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reducing this noise when cross building to the Android NDK:
util/header.c: In function 'perf_header__fprintf_info':
util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign]
fprintf(fp, "# captured on : %s", ctime(&st.st_ctime));
^
In file included from util/../perf.h:5:0,
from util/evlist.h:11,
from util/header.c:22:
/opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *'
extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__;
^
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are systems such as the Android NDK API level 24 has the
sigqueue() function but doesn't provide a prototype, adding noise to the
build:
util/evlist.c: In function 'perf_evlist__prepare_workload':
util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration]
if (sigqueue(getppid(), SIGUSR1, val))
^
util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs]
Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can
get a prototype.
Checked in the bionic git repo to be available since level 23:
https://android.googlesource.com/platform/bionic/+/master/libc/include/signal.h#123
int sigqueue(pid_t __pid, int __signal, const union sigval __value) __INTRODUCED_IN(23);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lmhpev1uni9kdrv7j29glyov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At some point we decided not to directly include kernel sources files
when building tools/perf/, but when tools/lib/subcmd/ was forked from
tools/perf it somehow ended up adding it via these two lines in its
Makefile:
CFLAGS += -I$(srctree)/include/uapi
CFLAGS += -I$(srctree)/include
As $(srctree) points to the kernel sources.
Removing those lines and keeping just:
CFLAGS += -I$(srctree)/tools/include/
Is enough to build tools/perf and tools/objtool.
This fixes the build when building from the sources in environments such
as the Android NDK crossbuilding from a fedora:26 system:
subcmd-util.h:11:15: error: expected ',' or ';' before 'void'
static inline void report(const char *prefix, const char *err, va_list params)
^
In file included from /git/perf/include/uapi/linux/stddef.h:2:0,
from /git/perf/include/uapi/linux/posix_types.h:5,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36,
from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33,
from run-command.c:2:
subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions
The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h
file that includes linux/posix_types.h ends up getting the one in the kernel
sources causing the breakage. Fix it.
Test built tools/objtool/ too.
Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 4b6ab94eab ("perf subcmd: Create subcmd library")
Link: https://lkml.kernel.org/n/tip-5lhaoecrj12t0bqwvpiu14sm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed while working on renameat2.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8omchrcjcvlwoxxv6wrjehfh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I was trigger happy on this one, as using ordered_events as implemented
by Jiri for use with the --block code under discussion on lkml incurs
in delaying processing to form batches that then get ordered and then
printed.
With 'perf trace' we want to process the events as they go, without that
delay, and doing it that way works well for the common case which is to
trace a thread or a workload started by 'perf trace'.
So revert back to not using ordered_events but add an option to select
that mode so that users can experiment with their particular use case to
see if works better, i.e. if the added delay is not a problem and the
ordering helps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8ki7sld6rusnjhhtaly26i5o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just hide a bit more how events gets delivered, hiding ordered_events
details from the main loop.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-lxwwf3238ta4neq2zh1y1h45@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the case that a bprintk event has a dereferenced pointer that is
stored as a string, and there's more values to process (more args), the
arg was not updated to point to the next arg after processing the
dereferenced pointer, and it screwed up what was to be displayed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 37db96bb49 ("tools lib traceevent: Handle new pointer processing of bprint strings")
Link: http://lkml.kernel.org/r/20181210134522.3f71e2ca@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some 'perf stat' options do not make sense to be negated (event,
cgroup), some do not have negated path implemented (metrics). Due to
that, it is better to disable the "no-" prefix for them, since
otherwise, the later opt-parsing segfaults.
Before:
$ perf stat --no-metrics -- ls
Segmentation fault (core dumped)
After:
$ perf stat --no-metrics -- ls
Error: option `no-metrics' isn't available
Usage: perf stat [<options>] [<command>]
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 1485912065.62416880.1544457604340.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the first line was used as a test identification, it needs to be
skipped by shell_test__description() function now.
Further notes from Hendrik:
It might be worth to note that adding the shebang is necessary to spot
them as scripts.
Using /bin/sh looks fine to. Just briefly checked whether the scripts
contains some bash-specifics, which is not the case.
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
addr_filter__entire_dso() uses the first and last symbols from a dso,
and so does not work when there are no symbols. Alter it to filter the
whole file instead.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used outside dso.c in a followup patch, so rename it and make it
non-static.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make life easier for users, bpftool automatically attempts
to mount the BPF virtual file system, if it is not mounted already,
before trying to pin objects in it. Similarly, it attempts to mount
tracefs if necessary before trying to dump the trace pipe to the
console.
While mounting file systems on-the-fly can improve user experience, some
administrators might prefer to avoid that. Let's add an option to block
these mount attempts. Note that it does not prevent automatic mounting
of tracefs by debugfs for the "bpftool prog tracelog" command.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As a follow-up to commit 30da46b5dc ("tools: bpftool: add a command to
dump the trace pipe"), attempt to mount the tracefs virtual file system
if it is not detected on the system before trying to dump content of the
tracing pipe on an invocation of "bpftool prog tracelog".
Usually, tracefs in automatically mounted by debugfs when the user tries
to access it (e.g. "ls /sys/kernel/debug/tracing" mounts the tracefs).
So if we failed to find it, it is probably that debugfs is not here
either. Therefore, we just attempt a single mount, at a location that
does not involve debugfs: /sys/kernel/tracing.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Current btf func_info, line_info and jited_line are designed to be
extensible. The record sizes for {func,line}_info are passed to kernel,
and the record sizes for {func,line,jited_line}_info are returned to
userspace during bpf_prog_info query.
In bpf selftests test_btf.c, when testing whether kernel returns
a legitimate {func,line, jited_line)_info rec_size, the test only
compares to the minimum allowed size. If the returned rec_size is smaller
than the minimum allowed size, it is considered incorrect.
The minimum allowed size for these three info sizes are equal to
current value of sizeof(struct bpf_func_info), sizeof(struct bpf_line_info)
and sizeof(__u64).
The original thinking was that in the future when rec_size is increased
in kernel, the same test should run correctly. But this sacrificed
the precision of testing under the very kernel the test is shipped with,
and bpf selftest is typically run with the same repo kernel.
So this patch changed the testing of rec_size such that the
kernel returned value should be equal to the size defined by
tools uapi header bpf.h which syncs with kernel uapi header.
Martin discovered a bug in one of rec_size comparisons.
Instead of comparing to minimum func_info rec_size 8, it compares to 4.
This patch fixed that issue as well.
Fixes: 999d82cbc0 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 05687352c6 ("bpf: Refactor and bug fix in test_func_type in test_btf.c")
Fixes: 4d6304c763 ("bpf: Add unit tests for bpf_line_info")
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
by default (Alexey Budankov)
- Add fallback routines to be used in places where we don't have the CPU mode
(kernel/userspace/hypervisor) and thus must first fallback lookups looking
at all map trees when trying to resolve symbols (Adrian Hunter)
- Fix error with config term "pt=0", where we should just force "pt=1" and
warn the user about the former being nonsensical (Adrian Hunter)
- Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
but instead we get 'coreutils' when sleep is provided by some versions of
the 'coreutils' package (Adrian Hunter)
- Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
when dealing with BPF, where symbol resolution happens via kallsyms, not via
the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)
- Support 'srccode' output field in 'perf script' (Andi Kleen)
- Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)
- Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
'perf report' (Jin Yao)
- Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)
- Make 'perf trace' use ordered_events (Jiri Olsa)
- Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)
- Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)
- Fix 'perf stat' shadow stats for clock events. (Ravi Bangoria)
- Remove needless rb_tree extra indirection from map__find() (Eric Saint-Etienne)
- Fix CSV mode column output for non-cgroup events in 'perf stat' (Stephane Eranian)
- Add sanity check to libtraceevent's is_timestamp_in_us() (Tzvetomir Stoyanov)
- Use ERR_CAST instead of ERR_PTR(PTR_ERR()) (Wen Yang)
- Fix Load_Miss_Real_Latency on SKL/SKX intel vendor event files (Andi Kleen)
- strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)
- Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)
- Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)
- Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)
- Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)
- Disable breakpoint tests for 32-bit ARM (Florian Fainelli)
- Fix typos all over the place, mostly in comments, but also in some debug
messages and JSON files (Ingo Molnar)
- Allow specifying proc-map-timeout in config file (Mark Drayton)
- Fix mmap_flags table generation script (Sihyeon Jang)
- Fix 'size' parameter to snprintf in the 'perf config' code (Sihyeon Jang)
- More libtraceevent renames to make it a proper library (Tzvetomir Stoyanov)
- Implement new API tep_get_ref() in libtraceevent (Tzvetomir Stoyanov)
- Added support for pkg-config in libtraceevent (Tzvetomir Stoyanov)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXBfqKQAKCRCyPKLppCJ+
JwB3AQCn2ij14Y2W4Cvy0ka18LZlxQkC0b+L30XZwUv9q34FSwD9HyErhRWTQhEU
PgPdn6TKqh9aYy7LRFACiQ4x/s7Dug8=
=xxUZ
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.21-20181217' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
by default (Alexey Budankov)
- Add fallback routines to be used in places where we don't have the CPU mode
(kernel/userspace/hypervisor) and thus must first fallback lookups looking
at all map trees when trying to resolve symbols (Adrian Hunter)
- Fix error with config term "pt=0", where we should just force "pt=1" and
warn the user about the former being nonsensical (Adrian Hunter)
- Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
but instead we get 'coreutils' when sleep is provided by some versions of
the 'coreutils' package (Adrian Hunter)
- Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
when dealing with BPF, where symbol resolution happens via kallsyms, not via
the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)
- Support 'srccode' output field in 'perf script' (Andi Kleen)
- Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)
- Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
'perf report' (Jin Yao)
- Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)
- Make 'perf trace' use ordered_events (Jiri Olsa)
- Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)
- Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)
- Fix 'perf stat' shadow stats for clock events. (Ravi Bangoria)
- Remove needless rb_tree extra indirection from map__find() (Eric Saint-Etienne)
- Fix CSV mode column output for non-cgroup events in 'perf stat' (Stephane Eranian)
- Add sanity check to libtraceevent's is_timestamp_in_us() (Tzvetomir Stoyanov)
- Use ERR_CAST instead of ERR_PTR(PTR_ERR()) (Wen Yang)
- Fix Load_Miss_Real_Latency on SKL/SKX intel vendor event files (Andi Kleen)
- strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)
- Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)
- Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)
- Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)
- Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)
- Disable breakpoint tests for 32-bit ARM (Florian Fainelli)
- Fix typos all over the place, mostly in comments, but also in some debug
messages and JSON files (Ingo Molnar)
- Allow specifying proc-map-timeout in config file (Mark Drayton)
- Fix mmap_flags table generation script (Sihyeon Jang)
- Fix 'size' parameter to snprintf in the 'perf config' code (Sihyeon Jang)
- More libtraceevent renames to make it a proper library (Tzvetomir Stoyanov)
- Implement new API tep_get_ref() in libtraceevent (Tzvetomir Stoyanov)
- Added support for pkg-config in libtraceevent (Tzvetomir Stoyanov)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This script is supposed to be allowed to run with regular user
privileges if a previously captured trace is being post processed.
Commit fbe313884d (tools/power/x86/intel_pstate_tracer: Free the
trace buffer memory) introduced a bug that breaks that option.
Commit 35459105de (tools/power/x86/intel_pstate_tracer: Add
optional setting of trace buffer memory allocation) moved the code
but kept the bug.
This patch fixes the issue.
Fixes: 35459105de (tools/power/x86/intel_pstate_tracer: Add optional ...)
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This cpupower update Linux 4.21 adds support for auto-completion for
cpupower tool from Abhishek Goel.
-----BEGIN PGP SIGNATURE-----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=U+pY
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for v4.21 from Shuah Khan:
"This cpupower update Linux 4.21 adds support for auto-completion for
cpupower tool from Abhishek Goel."
* tag 'linux-cpupower-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower : Auto-completion for cpupower tool
This patch fixes a memory leak in libbpf by freeing up line_info
member of struct bpf_program while unloading a program.
Fixes: 3d65014146 ("bpf: libbpf: Add btf_line_info support to libbpf")
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The following example shows map pretty print with structures
which include bitfield members.
enum A { A1, A2, A3, A4, A5 };
typedef enum A ___A;
struct tmp_t {
char a1:4;
int a2:4;
int :4;
__u32 a3:4;
int b;
___A b1:4;
enum A b2:4;
};
struct bpf_map_def SEC("maps") tmpmap = {
.type = BPF_MAP_TYPE_ARRAY,
.key_size = sizeof(__u32),
.value_size = sizeof(struct tmp_t),
.max_entries = 1,
};
BPF_ANNOTATE_KV_PAIR(tmpmap, int, struct tmp_t);
and the following map update in the bpf program:
key = 0;
struct tmp_t t = {};
t.a1 = 2;
t.a2 = 4;
t.a3 = 6;
t.b = 7;
t.b1 = 8;
t.b2 = 10;
bpf_map_update_elem(&tmpmap, &key, &t, 0);
With this patch, I am able to print out the map values
correctly with this patch:
bpftool map dump id 187
[{
"key": 0,
"value": {
"a1": 0x2,
"a2": 0x4,
"a3": 0x6,
"b": 7,
"b1": 0x8,
"b2": 0xa
}
}
]
Previously, if a function prototype argument has a typedef
type, the prototype is not printed since
function __btf_dumper_type_only() bailed out with error
if the type is a typedef. This commit corrected this
behavior by printing out typedef properly.
The following example shows forward type and
typedef type can be properly printed in function prototype
with modified test_btf_haskv.c.
struct t;
union u;
__attribute__((noinline))
static int test_long_fname_1(struct dummy_tracepoint_args *arg,
struct t *p1, union u *p2,
__u32 unused)
...
int _dummy_tracepoint(struct dummy_tracepoint_args *arg) {
return test_long_fname_1(arg, 0, 0, 0);
}
$ bpftool p d xlated id 24
...
int test_long_fname_1(struct dummy_tracepoint_args * arg,
struct t * p1, union u * p2,
__u32 unused)
...
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The core dump funcitonality in btf_dumper_int_bits() is
refactored into a separate function btf_dumper_bitfield()
which will be used by the next patch.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The new tests are added to test bpffs map pretty print in kernel with kind_flag
for structure type.
$ test_btf -p
......
BTF pretty print array(#1)......OK
BTF pretty print array(#2)......OK
PASS:8 SKIP:0 FAIL:0
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch added unit tests for different types handling
type->info.kind_flag. The following new tests are added:
$ test_btf
...
BTF raw test[82] (invalid int kind_flag): OK
BTF raw test[83] (invalid ptr kind_flag): OK
BTF raw test[84] (invalid array kind_flag): OK
BTF raw test[85] (invalid enum kind_flag): OK
BTF raw test[86] (valid fwd kind_flag): OK
BTF raw test[87] (invalid typedef kind_flag): OK
BTF raw test[88] (invalid volatile kind_flag): OK
BTF raw test[89] (invalid const kind_flag): OK
BTF raw test[90] (invalid restrict kind_flag): OK
BTF raw test[91] (invalid func kind_flag): OK
BTF raw test[92] (invalid func_proto kind_flag): OK
BTF raw test[93] (valid struct kind_flag, bitfield_size = 0): OK
BTF raw test[94] (valid struct kind_flag, int member, bitfield_size != 0): OK
BTF raw test[95] (valid union kind_flag, int member, bitfield_size != 0): OK
BTF raw test[96] (valid struct kind_flag, enum member, bitfield_size != 0): OK
BTF raw test[97] (valid union kind_flag, enum member, bitfield_size != 0): OK
BTF raw test[98] (valid struct kind_flag, typedef member, bitfield_size != 0): OK
BTF raw test[99] (valid union kind_flag, typedef member, bitfield_size != 0): OK
BTF raw test[100] (invalid struct type, bitfield_size greater than struct size): OK
BTF raw test[101] (invalid struct type, kind_flag bitfield base_type int not regular): OK
BTF raw test[102] (invalid struct type, kind_flag base_type int not regular): OK
BTF raw test[103] (invalid union type, bitfield_size greater than struct size): OK
...
PASS:122 SKIP:0 FAIL:0
The second parameter name of macro
BTF_INFO_ENC(kind, root, vlen)
in selftests test_btf.c is also renamed from "root" to "kind_flag".
Note that before this patch "root" is not used and always 0.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync include/uapi/linux/btf.h to tools/include/uapi/linux/btf.h.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Existing libraries and tracing frameworks work around this kernel
version check by automatically deriving the kernel version from
uname(3) or similar such that the user does not need to do it
manually; these workarounds also make the version check useless
at the same time.
Moreover, most other BPF tracing types enabling bpf_probe_read()-like
functionality have /not/ adapted this check, and in general these
days it is well understood anyway that all the tracing programs are
not stable with regards to future kernels as kernel internal data
structures are subject to change from release to release.
Back at last netconf we discussed [0] and agreed to remove this
check from bpf_prog_load() and instead document it here in the uapi
header that there is no such guarantee for stable API for these
programs.
[0] http://vger.kernel.org/netconf2018_files/DanielBorkmann_netconf2018.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa