dd53f6102c ("Merge tag 'kvmarm-for-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD")
59c5c58c5b ("Merge tag 'kvm-ppc-next-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD")
d7547c55cb ("KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2")
6520ca64cd ("KVM: PPC: Book3S HV: XIVE: Add a mapping for the source ESB pages")
39e9af3de5 ("KVM: PPC: Book3S HV: XIVE: Add a TIMA mapping")
e4945b9da5 ("KVM: PPC: Book3S HV: XIVE: Add get/set accessors for the VP XIVE state")
e6714bd167 ("KVM: PPC: Book3S HV: XIVE: Add a control to dirty the XIVE EQ pages")
7b46b6169a ("KVM: PPC: Book3S HV: XIVE: Add a control to sync the sources")
5ca8064748 ("KVM: PPC: Book3S HV: XIVE: Add a global reset control")
13ce3297c5 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
e8676ce50e ("KVM: PPC: Book3S HV: XIVE: Add a control to configure a source")
4131f83c3d ("KVM: PPC: Book3S HV: XIVE: add a control to initialize a source")
eacc56bb9d ("KVM: PPC: Book3S HV: XIVE: Introduce a new capability KVM_CAP_PPC_IRQ_XIVE")
90c73795af ("KVM: PPC: Book3S HV: Add a new KVM device for the XIVE native exploitation mode")
4f45b90e1c ("KVM: s390: add deflate conversion facilty to cpu model")
a243c16d18 ("KVM: arm64: Add capability to advertise ptrauth for guest")
a22fa321d1 ("KVM: arm64: Add userspace flag to enable pointer authentication")
4bd774e57b ("KVM: arm64/sve: Simplify KVM_REG_ARM64_SVE_VLS array sizing")
8ae6efdde4 ("KVM: arm64/sve: Clean up UAPI register ID definitions")
173aec2d5a ("KVM: s390: add enhanced sort facilty to cpu model")
555f3d03e7 ("KVM: arm64: Add a capability to advertise SVE support")
9033bba4b5 ("KVM: arm64/sve: Add pseudo-register for the guest's vector lengths")
7dd32a0d01 ("KVM: arm/arm64: Add KVM_ARM_VCPU_FINALIZE ioctl")
e1c9c98345 ("KVM: arm64/sve: Add SVE support to register access ioctl interface")
2b953ea348 ("KVM: Allow 2048-bit register access via ioctl interface")
None entails changes in tooling, the closest to that were some new arch
specific ioctls, that are still not handled by the tools/perf/trace/beauty/
library, that needs to create per-arch tables to convert ioctl cmd->string (and
back).
From a quick look the arch specific kvm-stat.c files at:
$ ls -1 tools/perf/arch/*/util/kvm-stat.c
tools/perf/arch/powerpc/util/kvm-stat.c
tools/perf/arch/s390/util/kvm-stat.c
tools/perf/arch/x86/util/kvm-stat.c
$
Are not affected.
This silences these perf building warnings:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/kvm.h' differs from latest version at 'arch/powerpc/include/uapi/asm/kvm.h'
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Cédric Le Goater <clg@kaod.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Peter Xu <peterx@redhat.com>
Link: https://lkml.kernel.org/n/tip-3msmqjenlmb7eygcdnmlqaq1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This enables stfle.155 and adds the subfunctions for KDSA. Bit 155 is
added to the list of facilities that will be enabled when there is no
cpu model involved as MSA9 requires no additional handling from
userspace, e.g. for migration.
Please note that a cpu model enabled user space can and will have the
final decision on the facility bits for a guests.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
For powerpc, s390, x86 and the main uapi linux/kvm.h header, none of
them entail changes in tooling.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-avn7iy8f4tcm2y40sbsdk31m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, on x86-64, perf uses LFENCE and MFENCE (rmb() and mb(),
respectively) when processing events from the perf ring buffer which
is unnecessarily expensive as we can do more lightweight in particular
given this is critical fast-path in perf.
According to Peter rmb()/mb() were added back then via a94d342b9c
("tools/perf: Add required memory barriers") at a time where kernel
still supported chips that needed it, but nowadays support for these
has been ditched completely, therefore we can fix them up as well.
While for x86-64, replacing rmb() and mb() with smp_*() variants would
result in just a compiler barrier for the former and LOCK + ADD for
the latter (__sync_synchronize() uses slower MFENCE by the way), Peter
suggested we can use smp_{load_acquire,store_release}() instead for
architectures where its implementation doesn't resolve in slower smp_mb().
Thus, e.g. in x86-64 we would be able to avoid CPU barrier entirely due
to TSO. For architectures where the latter needs to use smp_mb() e.g.
on arm, we stick to cheaper smp_rmb() variant for fetching the head.
This work adds helpers ring_buffer_read_head() and ring_buffer_write_tail()
for tools infrastructure that either switches to smp_load_acquire() for
architectures where it is cheaper or uses READ_ONCE() + smp_rmb() barrier
for those where it's not in order to fetch the data_head from the perf
control page, and it uses smp_store_release() to write the data_tail.
Latter is smp_mb() + WRITE_ONCE() combination or a cheaper variant if
architecture allows for it. Those that rely on smp_rmb() and smp_mb() can
further improve performance in a follow up step by implementing the two
under tools/arch/*/include/asm/barrier.h such that they don't have to
fallback to rmb() and mb() in tools/include/asm/barrier.h.
Switch perf to use ring_buffer_read_head() and ring_buffer_write_tail()
so it can make use of the optimizations. Later, we convert libbpf as
well to use the same helpers.
Side note [0]: the topic has been raised of whether one could simply use
the C11 gcc builtins [1] for the smp_load_acquire() and smp_store_release()
instead:
__atomic_load_n(ptr, __ATOMIC_ACQUIRE);
__atomic_store_n(ptr, val, __ATOMIC_RELEASE);
Kernel and (presumably) tooling shipped along with the kernel has a
minimum requirement of being able to build with gcc-4.6 and the latter
does not have C11 builtins. While generally the C11 memory models don't
align with the kernel's, the C11 load-acquire and store-release alone
/could/ suffice, however. Issue is that this is implementation dependent
on how the load-acquire and store-release is done by the compiler and
the mapping of supported compilers must align to be compatible with the
kernel's implementation, and thus needs to be verified/tracked on a
case by case basis whether they match (unless an architecture uses them
also from kernel side). The implementations for smp_load_acquire() and
smp_store_release() in this patch have been adapted from the kernel side
ones to have a concrete and compatible mapping in place.
[0] http://patchwork.ozlabs.org/patch/985422/
[1] https://gcc.gnu.org/onlinedocs/gcc/_005f_005fatomic-Builtins.html
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The 35b3fde620 ("KVM: s390: wire up bpb feature") was noticed by the
perf build process:
Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/kvm.h' differs from latest version at 'arch/s390/include/uapi/asm/kvm.h'
The changes in this cset don't cause or require changes in tools/perf/,
so just update the copy to silence the build warning.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kif2fdkcaewj8iqw6lwyil8s@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
- plug a memory leak in the intel pmu init code
- clang fixes
- tooling fix to avoid including kernel headers
- a fix for jvmti to generate correct debug information for inlined
code
- replace backtick with a regular shell function
- fix the build in hardened environments
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Plug memory leak in intel_pmu_init()
x86/asm: Allow again using asm.h when building for the 'bpf' clang target
tools arch s390: Do not include header files from the kernel sources
perf jvmti: Generate correct debug information for inlined code
perf tools: Fix up build in hardened environments
perf tools: Use shell function for perl cflags retrieval
With 720f228e8d ("bpf: fix broken BPF selftest build") the
inclusion of arch-specific header files changed. Including the
asm/bpf_perf_event.h on s390, correctly includes the s390 specific
header file. This header file tries then to include the s390
asm/ptrace.h and the build fails with:
cc -Wall -O2 -I../../../include/uapi -I../../../lib -I../../../../include/generated -I../../../include test_verifier.c
+/root/git/linux/tools/testing/selftests/bpf/libbpf.a /root/git/linux/tools/testing/selftests/bpf/cgroup_helpers.c -lcap -lelf -o
+/root/git/linux/tools/testing/selftests/bpf/test_verifier
In file included from ../../../include/uapi/asm/bpf_perf_event.h:4:0,
from ../../../include/uapi/linux/bpf_perf_event.h:11,
from test_verifier.c:29:
../../../include/uapi/../../arch/s390/include/uapi/asm/bpf_perf_event.h:7:9: error: unknown type name 'user_pt_regs'
typedef user_pt_regs bpf_user_pt_regs_t;
^~~~~~~~~~~~
make: *** [../lib.mk:109: /root/git/linux/tools/testing/selftests/bpf/test_verifier] Error 1
This is caused by a recent update to the s390 asm/ptrace.h file
that is not (yet) available in the local installation. That means,
the s390 asm/ptrace.h must be included from the tools/arch/s390
directory.
Because there is no proper framework to deal with asm specific
includes in tools/, slightly modify the s390 asm/bpf_perf_event.h
to include the local ptrace.h header file.
See also discussion on
https://marc.info/?l=linux-s390&m=151359424420691&w=2
Please note that this needs to be preserved until tools/ is able to
correctly handle asm specific headers.
References: https://marc.info/?l=linux-s390&m=151359424420691&w=2
Fixes: 720f228e8d ("bpf: fix broken BPF selftest build")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Long ago we decided to be verbotten including files in the kernel git
sources from tools/ living source code, to avoid disturbing kernel
development (and perf's and other tools/) when, say, a kernel hacker
adds something, tests everything but tools/ and have tools/ build
broken.
This got broken recently by s/390, fix it by copying
arch/s390/include/uapi/asm/perf_regs.h to tools/arch/s390/include/uapi/asm/,
making this one be used by means of <asm/perf_regs.h> and updating
tools/perf/check_headers.sh to make sure we are notified when the
original changes, so that we can check if anything is needed on the
tooling side.
This would have been caught by the 'tarkpg' test entry in:
$ make -C tools/perf build-test
When run on a s/390 build system or container.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: f704ef4460 ("s390/perf: add support for perf_regs and libdw")
Link: https://lkml.kernel.org/n/tip-n57139ic0v9uffx8wdqi3d8a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) CAN fixes from Martin Kelly (cancel URBs properly in all the CAN usb
drivers).
2) Revert returning -EEXIST from __dev_alloc_name() as this propagates
to userspace and broke some apps. From Johannes Berg.
3) Fix conn memory leaks and crashes in TIPC, from Jon Malloc and Cong
Wang.
4) Gianfar MAC can't do EEE so don't advertise it by default, from
Claudiu Manoil.
5) Relax strict netlink attribute validation, but emit a warning. From
David Ahern.
6) Fix regression in checksum offload of thunderx driver, from Florian
Westphal.
7) Fix UAPI bpf issues on s390, from Hendrik Brueckner.
8) New card support in iwlwifi, from Ihab Zhaika.
9) BBR congestion control bug fixes from Neal Cardwell.
10) Fix port stats in nfp driver, from Pieter Jansen van Vuuren.
11) Fix leaks in qualcomm rmnet, from Subash Abhinov Kasiviswanathan.
12) Fix DMA API handling in sh_eth driver, from Thomas Petazzoni.
13) Fix spurious netpoll warnings in bnxt_en, from Calvin Owens.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
net: mvpp2: fix the RSS table entry offset
tcp: evaluate packet losses upon RTT change
tcp: fix off-by-one bug in RACK
tcp: always evaluate losses in RACK upon undo
tcp: correctly test congestion state in RACK
bnxt_en: Fix sources of spurious netpoll warnings
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
sfc: pass valid pointers from efx_enqueue_unwind
gianfar: Disable EEE autoneg by default
tcp: invalidate rate samples during SACK reneging
can: peak/pcie_fd: fix potential bug in restarting tx queue
can: usb_8dev: cancel urb on -EPIPE and -EPROTO
can: kvaser_usb: cancel urb on -EPIPE and -EPROTO
can: esd_usb2: cancel urb on -EPIPE and -EPROTO
can: ems_usb: cancel urb on -EPIPE and -EPROTO
can: mcba_usb: cancel urb on -EPROTO
usbnet: fix alignment for frames with no ethernet header
tcp: use current time in tcp_rcv_space_adjust()
...
There were two trivial updates to these upstream UAPI headers:
arch/s390/include/uapi/asm/kvm.h
arch/s390/include/uapi/asm/kvm_perf.h
arch/x86/lib/x86-opcode-map.txt
Synchronize them with their tooling copies.
(The x86 opcode map includes a new instruction pattern now.)
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Synchronize the uapi kernel header files which solves the broken
uapi export of pt_regs. Because of arch-specific uapi headers,
extended the include path in the Makefile.
With this change, the test_verifier program compiles and runs successfully
on s390.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Many user space API headers have licensing information, which is either
incomplete, badly formatted or just a shorthand for referring to the
license under which the file is supposed to be. This makes it hard for
compliance tools to determine the correct license.
Update these files with an SPDX license identifier. The identifier was
chosen based on the license information in the file.
GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license
identifier with the added 'WITH Linux-syscall-note' exception, which is
the officially assigned exception identifier for the kernel syscall
exception:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
This exception makes it possible to include GPL headers into non GPL
code, without confusing license compliance tools.
Headers which have either explicit dual licensing or are just licensed
under a non GPL license are updated with the corresponding SPDX
identifier and the GPLv2 with syscall exception identifier. The format
is:
((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE)
SPDX license identifiers are a legally binding shorthand, which can be
used instead of the full boiler plate text. The update does not remove
existing license information as this has to be done on a case by case
basis and the copyright holders might have to be consulted. This will
happen in a separate step.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.
By default are files without license information under the default
license of the kernel, which is GPLV2. Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:
NOTE! This copyright does *not* cover user programs that use kernel
services by normal system calls - this is merely considered normal use
of the kernel, and does *not* fall under the heading of "derived work".
otherwise syscall usage would not be possible.
Update the files which contain no license information with an SPDX
license identifier. The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception. SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne. See the previous patch in this series for the
methodology of how this patch was researched.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Time for a sync with ABI/uapi headers with the upcoming v4.14 kernel.
None of the ABI changes require any source code level changes to our
existing in-kernel tooling code:
- tools/arch/s390/include/uapi/asm/kvm.h:
New KVM_S390_VM_TOD_EXT ABI, not used by in-kernel tooling.
- tools/arch/x86/include/asm/cpufeatures.h:
tools/arch/x86/include/asm/disabled-features.h:
New PCID, SME and VGIF x86 CPU feature bits defined.
- tools/include/asm-generic/hugetlb_encode.h:
tools/include/uapi/asm-generic/mman-common.h:
tools/include/uapi/linux/mman.h:
Two new madvise() flags, plus a hugetlb system call mmap flags
restructuring/extension changes.
- tools/include/uapi/drm/drm.h:
tools/include/uapi/drm/i915_drm.h:
New drm_syncobj_create flags definitions, new drm_syncobj_wait
and drm_syncobj_array ABIs. DRM_I915_PERF_* calls and a new
I915_PARAM_HAS_EXEC_FENCE_ARRAY ABI for the Intel driver.
- tools/include/uapi/linux/bpf.h:
New bpf_sock fields (::mark and ::priority), new XDP_REDIRECT
action, new kvm_ppc_smmu_info fields (::data_keys, instr_keys)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913073823.lxmi4c7ejqlfabjx@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync up (copy) the following v4.13 kernel headers to the tooling headers:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
- KVM ABI extensions, which do not affect perf tooling
arch/x86/include/asm/cpufeatures.h:
arch/x86/include/asm/disabled-features.h:
- New PCID CPU feature on Intel CPUs - does not affect tooling.
I.e. no real changes were needed to resolve the build warnings, just a plain copy
of the latest kernel header version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Geneviève Bastien <gbastien@versatic.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Julien Desfossez <jdesfossez@efficios.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170730095232.4j4xigsoqwufl5hu@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sync (copy) the following v4.12 kernel headers to the tooling headers:
arch/x86/include/asm/disabled-features.h:
arch/x86/include/uapi/asm/kvm.h:
arch/powerpc/include/uapi/asm/kvm.h:
arch/s390/include/uapi/asm/kvm.h:
arch/arm/include/uapi/asm/kvm.h:
arch/arm64/include/uapi/asm/kvm.h:
- 'struct kvm_sync_regs' got changed in an ABI-incompatible way,
fortunately none of the (in-kernel) tooling relied on it
- new KVM_DEV calls added
arch/x86/include/asm/required-features.h:
- 5-level paging hardware ABI detail added
arch/x86/include/asm/cpufeatures.h:
- new CPU feature added
arch/x86/include/uapi/asm/vmx.h:
- new VMX exit conditions
None of the changes requires fixes in the tooling source code.
This addresses the following warnings:
Warning: include/uapi/linux/stat.h differs from kernel
Warning: arch/x86/include/asm/disabled-features.h differs from kernel
Warning: arch/x86/include/asm/required-features.h differs from kernel
Warning: arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: arch/x86/include/uapi/asm/kvm.h differs from kernel
Warning: arch/x86/include/uapi/asm/vmx.h differs from kernel
Warning: arch/powerpc/include/uapi/asm/kvm.h differs from kernel
Warning: arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm/include/uapi/asm/kvm.h differs from kernel
Warning: arch/arm64/include/uapi/asm/kvm.h differs from kernel
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yao Jin <yao.jin@linux.intel.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170524065721.j2mlch6bgk5klgbc@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
msa6 and msa7 require no changes.
msa8 adds kma instruction and feature area.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Some macros required by tools/perf/trace/beauty/mmap.c is not support
for all architectures. For example, MAP_32BIT is defined on x86 only,
alpha doesn't define MADV_HWPOISON and MADV_SOFT_OFFLINE.
This patch regenerates mman.h for each arch, defines these missing
macros for perf. For missing MADV_*, fall back to asm-generic/mman-common
because they are in a 'case ...' statement. For flags, define it to 0.
Following is the script to generate this patch:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
rm `find ./tools/arch/ -name mman.h`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h.tmp
real_target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
rm -f $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
touch $real_target
for m in $macros
do
if cat << EOF | gcc -Itools/arch/$arch/include -Itools/arch/$arch/include/uapi -Iinclude/ -Iinclude/uapi -E - | grep $m > /dev/null 2>&1
#include <uapi/asm/mman.h.tmp>
#include <uapi/linux/mman.h>
$m
EOF
then
echo "Fixing $m for $arch"
echo "/* $m is undefined on $arch, fix it for perf */" >> $target
if echo $m | grep '^MADV_' > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m include/uapi/asm-generic/mman-common.h | sed 's/[ \t]*\/\*.*$//g' >> $target
else
echo "#define $m 0" >> $target
fi
fi
done
real_target=tools/arch/$arch/include/uapi/asm/mman.h
echo '#ifndef '$guard > $real_target
echo '#define '$guard >> $real_target
cat $target | sed 's|asm-generic|uapi/asm-generic|g' >> $real_target
echo '#endif' >> $real_target
rm $target
echo "$real_target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_FREE
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: 277cf08f3f ("perf trace beauty mmap: Fix defines for non !x86_64")
Link: http://lkml.kernel.org/r/1473850649-83389-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some mmap related macros have different values for different
architectures. This patch introduces uapi mman.h for each
architectures.
Three headers are cloned from kernel include to tools/include:
tools/include/uapi/asm-generic/mman-common.h
tools/include/uapi/asm-generic/mman.h
tools/include/uapi/linux/mman.h
The main part of this patch is generated by following script:
macros=`cat $0 | awk 'V==1 {print}; /^# start macro list/ {V=1}'`
for arch in `ls tools/arch`
do
[ -d tools/arch/$arch/include/uapi/asm ] || mkdir -p tools/arch/$arch/include/uapi/asm
src=arch/$arch/include/uapi/asm/mman.h
target=tools/arch/$arch/include/uapi/asm/mman.h
guard="TOOLS_ARCH_"`echo $arch | awk '{print toupper($0)}'`_UAPI_ASM_MMAN_FIX_H
echo '#ifndef '$guard > $target
echo '#define '$guard >> $target
[ -f $src ] &&
for m in $macros
do
if grep '#define[ \t]*'$m $src > /dev/null 2>&1
then
grep -h '#define[ \t]*'$m $src | sed 's/[ \t]*\/\*.*$//g' >> $target
fi
done
if [ -f $src ]
then
grep '#include <asm-generic' $src >> $target
else
echo "#include <asm-generic/mman.h>" >> $target
fi
echo '#endif' >> $target
echo "$target"
done
exit 0
# Following macros are extracted from:
# tools/perf/trace/beauty/mmap.c
#
# start macro list
MADV_DODUMP
MADV_DOFORK
MADV_DONTDUMP
MADV_DONTFORK
MADV_DONTNEED
MADV_HUGEPAGE
MADV_HWPOISON
MADV_MERGEABLE
MADV_NOHUGEPAGE
MADV_NORMAL
MADV_RANDOM
MADV_REMOVE
MADV_SEQUENTIAL
MADV_SOFT_OFFLINE
MADV_UNMERGEABLE
MADV_WILLNEED
MAP_32BIT
MAP_ANONYMOUS
MAP_DENYWRITE
MAP_EXECUTABLE
MAP_FILE
MAP_FIXED
MAP_GROWSDOWN
MAP_HUGETLB
MAP_LOCKED
MAP_NONBLOCK
MAP_NORESERVE
MAP_POPULATE
MAP_PRIVATE
MAP_SHARED
MAP_STACK
MAP_UNINITIALIZED
MREMAP_FIXED
MREMAP_MAYMOVE
PROT_EXEC
PROT_GROWSDOWN
PROT_GROWSUP
PROT_NONE
PROT_READ
PROT_SEM
PROT_WRITE
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1473684871-209320-2-git-send-email-wangnan0@huawei.com
[ Added new files to tools/perf/MANIFEST to fix the detached tarball build, add mman.h for ARC ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From a quick look nothing stands out as requiring changes to kvm tools
such as tools/perf/arch/s390/util/kvm-stat.c.
Silences these header checking warnings:
$ make -C tools/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/s390/include/uapi/asm/kvm.h differs from kernel
Warning: tools/arch/s390/include/uapi/asm/sie.h differs from kernel
Warning: tools/arch/arm64/include/uapi/asm/kvm.h differs from kernel
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-btutge414g516qmh6r5ienlj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use it in bitops/__ffs.h and bitops/atomic.h, that we also got from
the kernel, but were getting it from either newer systems that carry it
in /usr/include, or from the kernel sources, that we decided not to
touch from tools/ code. Fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lwqvgbuitjmrdpjmjp6zqnyx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those kernel files were being directly accessed, which we're not
allowing anymore to avoid that changes in the kernel side break tooling.
Warn if these copies drift from the original files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Auger <eric.auger@linaro.org>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yunlong Song <yunlong.song@huawei.com>
Link: http://lkml.kernel.org/n/tip-mnopguymhnwzjhw3mowllvsy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will need it for atomic.h, so move it from the ad-hoc tools/perf/
place to a tools/ subset of the kernel arch/ hierarchy.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zv4x77074resrkl4ayzf5e7d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo