A setclientid_confirm with (clientid, verifier) both matching an
existing confirmed record is assumed to be a replay, but if the verifier
doesn't match, it shouldn't be.
This would be a very rare case, except that clients following
https://tools.ietf.org/html/rfc7931#section-5.8 may depend on the
failure.
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv4.1 has built-in trunking support that allows a client to determine
whether two connections to two different IP addresses are actually to
the same server. NFSv4.0 does not, but RFC 7931 attempts to provide
clients a means to do this, basically by performing a SETCLIENTID to one
address and confirming it with a SETCLIENTID_CONFIRM to the other.
Linux clients since 05f4c350ee "NFS: Discover NFSv4 server trunking
when mounting" implement a variation on this suggestion. It is possible
that other clients do too.
This depends on the clientid and verifier not being accepted by an
unrelated server. Since both are 64-bit values, that would be very
unlikely if they were random numbers. But they aren't:
knfsd generates the 64-bit clientid by concatenating the 32-bit boot
time (in seconds) and a counter. This makes collisions between
clientids generated by the same server extremely unlikely. But
collisions are very likely between clientids generated by servers that
boot at the same time, and it's quite common for multiple servers to
boot at the same time. The verifier is a concatenation of the
SETCLIENTID time (in seconds) and a counter, so again collisions between
different servers are likely if multiple SETCLIENTIDs are done at the
same time, which is a common case.
Therefore recent NFSv4.0 clients may decide two different servers are
really the same, and mount a filesystem from the wrong server.
Fortunately the Linux client, since 55b9df93dd "nfsv4/v4.1: Verify the
client owner id during trunking detection", only does this when given
the non-default "migration" mount option.
The fault is really with RFC 7931, and needs a client fix, but in the
meantime we can mitigate the chance of these collisions by randomizing
the starting value of the counters used to generate clientids and
verifiers.
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we are using v4.1+, then we can send notification when contended
locks become free. Inform the client of that fact.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible for a client to call in on a lock that is blocked for a
long time, but discontinue polling for it. A malicious client could
even set a lock on a file, and then spam the server with failing lock
requests from different lockowners that pile up in a DoS attack.
Add the blocked lock structures to a per-net namespace LRU when hashing
them, and timestamp them. If the lock request is not revisited after a
lease period, we'll drop it under the assumption that the client is no
longer interested.
This also gives us a mechanism to clean up these objects at server
shutdown time as well.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Create a new per-lockowner+per-inode structure that contains a
file_lock. Have nfsd4_lock add this structure to the lockowner's list
prior to setting the lock. Then call the vfs and request a blocking lock
(by setting FL_SLEEP). If we get anything besides FILE_LOCK_DEFERRED
back, then we dequeue the block structure and free it. When the next
lock request comes in, we'll look for an existing block for the same
filehandle and dequeue and reuse it if there is one.
When the lock comes free (a'la an lm_notify call), we dequeue it
from the lockowner's list and kick off a CB_NOTIFY_LOCK callback to
inform the client that it should retry the lock request.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add the encoding/decoding for CB_NOTIFY_LOCK operations.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
By design notifier can be registered once only, however nfsd registers
the same inetaddr notifiers per net-namespace. When this happen it
corrupts list of notifiers, as result some notifiers can be not called
on proper event, traverse on list can be cycled forever, and second
unregister can access already freed memory.
Cc: stable@vger.kernel.org
fixes: 36684996 ("nfsd: Register callbacks on the inetaddr_chain and inet6addr_chain")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfserr is big-endian, so we should convert it to host-endian before
printing it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
inode_change_ok() will be resposible for clearing capabilities and IMA
extended attributes and as such will need dentry. Give it as an argument
to inode_change_ok() instead of an inode. Also rename inode_change_ok()
to setattr_prepare() to better relect that it does also some
modifications in addition to checks.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
We already have that info in the client pointer. No need to pass around
a copy.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We currently can hit a deadlock (of sorts) when trying to use flexfiles
layouts with XFS. XFS will call break_layout when something wants to
write to the file. In the case of the (super-simple) flexfiles layout
driver in knfsd, the MDS and DS are the same machine.
The client can get a layout and then issue a v3 write to do its I/O. XFS
will then call xfs_break_layouts, which will cause a CB_LAYOUTRECALL to
be issued to the client. The client however can't return the layout
until the v3 WRITE completes, but XFS won't allow the write to proceed
until the layout is returned.
Christoph says:
XFS only cares about block-like layouts where the client has direct
access to the file blocks. I'd need to look how to propagate the
flag into break_layout, but in principle we don't need to do any
recalls on truncate ever for file and flexfile layouts.
If we're never going to recall the layout, then we don't even need to
set the lease at all. Just skip doing so on flexfiles layouts by
adding a new flag to struct nfsd4_layout_ops and skipping the lease
setting and removal when that flag is true.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_lock will take the st_mutex before working with the stateid it
gets, but between the time when we drop the cl_lock and take the mutex,
the stateid could become unhashed (a'la FREE_STATEID). If that happens
the lock stateid returned to the client will be forgotten.
Fix this by first moving the st_mutex acquisition into
lookup_or_create_lock_state. Then, have it check to see if the lock
stateid is still hashed after taking the mutex. If it's not, then put
the stateid and try the find/create again.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org # feb9dad5 nfsd: Always lock state exclusively.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When running LTP's nfslock01 test, the Linux client can send a LOCK
and a FREE_STATEID request at the same time. The outcome is:
Frame 324 R OPEN stateid [2,O]
Frame 115004 C LOCK lockowner_is_new stateid [2,O] offset 672000 len 64
Frame 115008 R LOCK stateid [1,L]
Frame 115012 C WRITE stateid [0,L] offset 672000 len 64
Frame 115016 R WRITE NFS4_OK
Frame 115019 C LOCKU stateid [1,L] offset 672000 len 64
Frame 115022 R LOCKU NFS4_OK
Frame 115025 C FREE_STATEID stateid [2,L]
Frame 115026 C LOCK lockowner_is_new stateid [2,O] offset 672128 len 64
Frame 115029 R FREE_STATEID NFS4_OK
Frame 115030 R LOCK stateid [3,L]
Frame 115034 C WRITE stateid [0,L] offset 672128 len 64
Frame 115038 R WRITE NFS4ERR_BAD_STATEID
In other words, the server returns stateid L in a successful LOCK
reply, but it has already released it. Subsequent uses of stateid L
fail.
To address this, protect the generation check in nfsd4_free_stateid
with the st_mutex. This should guarantee that only one of two
outcomes occurs: either LOCK returns a fresh valid stateid, or
FREE_STATEID returns NFS4ERR_LOCKS_HELD.
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Fix-suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
b44061d0b9 introduced a dentry ref counting bug. Previously we were
grabbing one ref to dchild in nfsd_create(), but with the creation of
nfsd_create_locked() we have a ref for dchild from the lookup in
nfsd_create(), and then another ref in nfsd_create_locked(). The ref
from the lookup in nfsd_create() is never dropped and results in
dentries still in use at unmount.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Fixes: b44061d0b9 "nfsd: reorganize nfsd_create"
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trond made a change to the server's tcp logic that allows a fast
client to better take advantage of high bandwidth networks, but
may increase the risk that a single client could starve other
clients; a new sunrpc.svc_rpc_per_connection_limit parameter
should help mitigate this in the (hopefully unlikely) event this
becomes a problem in practice.
Tom Haynes added a minimal flex-layout pnfs server, which is of
no use in production for now--don't build it unless you're doing
client testing or further server development.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mo54
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Trond made a change to the server's tcp logic that allows a fast
client to better take advantage of high bandwidth networks, but may
increase the risk that a single client could starve other clients;
a new sunrpc.svc_rpc_per_connection_limit parameter should help
mitigate this in the (hopefully unlikely) event this becomes a
problem in practice.
- Tom Haynes added a minimal flex-layout pnfs server, which is of no
use in production for now--don't build it unless you're doing
client testing or further server development"
* tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd: remove some dead code in nfsd_create_locked()
nfsd: drop unnecessary MAY_EXEC check from create
nfsd: clean up bad-type check in nfsd_create_locked
nfsd: remove unnecessary positive-dentry check
nfsd: reorganize nfsd_create
nfsd: check d_can_lookup in fh_verify of directories
nfsd: remove redundant zero-length check from create
nfsd: Make creates return EEXIST instead of EACCES
SUNRPC: Detect immediate closure of accepted sockets
SUNRPC: accept() may return sockets that are still in SYN_RECV
nfsd: allow nfsd to advertise multiple layout types
nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
nfsd/blocklayout: Make sure calculate signature/designator length aligned
xfs: abstract block export operations from nfsd layouts
SUNRPC: Remove unused callback xpo_adjust_wspace()
SUNRPC: Change TCP socket space reservation
SUNRPC: Add a server side per-connection limit
SUNRPC: Micro optimisation for svc_data_ready
SUNRPC: Call the default socket callbacks instead of open coding
SUNRPC: lock the socket while detaching it
...
We changed this around in f135af1041f ('nfsd: reorganize nfsd_create')
so "dchild" can't be an error pointer any more. Also, dchild can't be
NULL here (and dput would already handle this even if it was).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We need an fh_verify to make sure we at least have a dentry, but actual
permission checks happen later.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfs_{create,mkdir,mknod} each begin with a call to may_create(), which
returns EEXIST if the object already exists.
This check is therefore unnecessary.
(In the NFSv2 case, nfsd_proc_create also has such a check. Contrary to
RFC 1094, our code seems to believe that a CREATE of an existing file
should succeed. I'm leaving that behavior alone.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's some odd logic in nfsd_create() that allows it to be called with
the parent directory either locked or unlocked. The only already-locked
caller is NFSv2's nfsd_proc_create(). It's less confusing to split out
the unlocked case into a separate function which the NFSv2 code can call
directly.
Also fix some comments while we're here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Create and other nfsd ops generally assume we can call lookup_one_len on
inodes with S_IFDIR set. Al says that this assumption isn't true in
general, though it should be for the filesystem objects nfsd sees.
Add a check just to make sure our assumption isn't violated.
Remove a couple checks for i_op->lookup in create code.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lookup_one_len already has this check.
The only effect of this patch is to return access instead of perm in the
0-length-filename case. I actually prefer nfserr_perm (or _inval?), but
I doubt anyone cares.
The isdotent check seems redundant too, but I worry that some client
might actually care about that strange nfserr_exist error.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When doing a create (mkdir/mknod) on a name, it's worth
checking the name exists first before returning EACCES in case
the directory is not writeable by the user.
This makes return values on the client more consistent
regardless of whenever the entry there is cached in the local
cache or not.
Another positive side effect is certain programs only expect
EEXIST in that case even despite POSIX allowing any valid
error to be returned.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull userns vfs updates from Eric Biederman:
"This tree contains some very long awaited work on generalizing the
user namespace support for mounting filesystems to include filesystems
with a backing store. The real world target is fuse but the goal is
to update the vfs to allow any filesystem to be supported. This
patchset is based on a lot of code review and testing to approach that
goal.
While looking at what is needed to support the fuse filesystem it
became clear that there were things like xattrs for security modules
that needed special treatment. That the resolution of those concerns
would not be fuse specific. That sorting out these general issues
made most sense at the generic level, where the right people could be
drawn into the conversation, and the issues could be solved for
everyone.
At a high level what this patchset does a couple of simple things:
- Add a user namespace owner (s_user_ns) to struct super_block.
- Teach the vfs to handle filesystem uids and gids not mapping into
to kuids and kgids and being reported as INVALID_UID and
INVALID_GID in vfs data structures.
By assigning a user namespace owner filesystems that are mounted with
only user namespace privilege can be detected. This allows security
modules and the like to know which mounts may not be trusted. This
also allows the set of uids and gids that are communicated to the
filesystem to be capped at the set of kuids and kgids that are in the
owning user namespace of the filesystem.
One of the crazier corner casees this handles is the case of inodes
whose i_uid or i_gid are not mapped into the vfs. Most of the code
simply doesn't care but it is easy to confuse the inode writeback path
so no operation that could cause an inode write-back is permitted for
such inodes (aka only reads are allowed).
This set of changes starts out by cleaning up the code paths involved
in user namespace permirted mounts. Then when things are clean enough
adds code that cleanly sets s_user_ns. Then additional restrictions
are added that are possible now that the filesystem superblock
contains owner information.
These changes should not affect anyone in practice, but there are some
parts of these restrictions that are changes in behavior.
- Andy's restriction on suid executables that does not honor the
suid bit when the path is from another mount namespace (think
/proc/[pid]/fd/) or when the filesystem was mounted by a less
privileged user.
- The replacement of the user namespace implicit setting of MNT_NODEV
with implicitly setting SB_I_NODEV on the filesystem superblock
instead.
Using SB_I_NODEV is a stronger form that happens to make this state
user invisible. The user visibility can be managed but it caused
problems when it was introduced from applications reasonably
expecting mount flags to be what they were set to.
There is a little bit of work remaining before it is safe to support
mounting filesystems with backing store in user namespaces, beyond
what is in this set of changes.
- Verifying the mounter has permission to read/write the block device
during mount.
- Teaching the integrity modules IMA and EVM to handle filesystems
mounted with only user namespace root and to reduce trust in their
security xattrs accordingly.
- Capturing the mounters credentials and using that for permission
checks in d_automount and the like. (Given that overlayfs already
does this, and we need the work in d_automount it make sense to
generalize this case).
Furthermore there are a few changes that are on the wishlist:
- Get all filesystems supporting posix acls using the generic posix
acls so that posix_acl_fix_xattr_from_user and
posix_acl_fix_xattr_to_user may be removed. [Maintainability]
- Reducing the permission checks in places such as remount to allow
the superblock owner to perform them.
- Allowing the superblock owner to chown files with unmapped uids and
gids to something that is mapped so the files may be treated
normally.
I am not considering even obvious relaxations of permission checks
until it is clear there are no more corner cases that need to be
locked down and handled generically.
Many thanks to Seth Forshee who kept this code alive, and putting up
with me rewriting substantial portions of what he did to handle more
corner cases, and for his diligent testing and reviewing of my
changes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
fs: Call d_automount with the filesystems creds
fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
evm: Translate user/group ids relative to s_user_ns when computing HMAC
dquot: For now explicitly don't support filesystems outside of init_user_ns
quota: Handle quota data stored in s_user_ns in quota_setxquota
quota: Ensure qids map to the filesystem
vfs: Don't create inodes with a uid or gid unknown to the vfs
vfs: Don't modify inodes with a uid or gid unknown to the vfs
cred: Reject inodes with invalid ids in set_create_file_as()
fs: Check for invalid i_uid in may_follow_link()
vfs: Verify acls are valid within superblock's s_user_ns.
userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
fs: Refuse uid/gid changes which don't map into s_user_ns
selinux: Add support for unprivileged mounts from user namespaces
Smack: Handle labels consistently in untrusted mounts
Smack: Add support for unprivileged mounts from user namespaces
fs: Treat foreign mounts as nosuid
fs: Limit file caps to the user namespace of the super block
userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
userns: Remove implicit MNT_NODEV fragility.
...
Pull vfs updates from Al Viro:
"Assorted cleanups and fixes.
Probably the most interesting part long-term is ->d_init() - that will
have a bunch of followups in (at least) ceph and lustre, but we'll
need to sort the barrier-related rules before it can get used for
really non-trivial stuff.
Another fun thing is the merge of ->d_iput() callers (dentry_iput()
and dentry_unlink_inode()) and a bunch of ->d_compare() ones (all
except the one in __d_lookup_lru())"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
fs/dcache.c: avoid soft-lockup in dput()
vfs: new d_init method
vfs: Update lookup_dcache() comment
bdev: get rid of ->bd_inodes
Remove last traces of ->sync_page
new helper: d_same_name()
dentry_cmp(): use lockless_dereference() instead of smp_read_barrier_depends()
vfs: clean up documentation
vfs: document ->d_real()
vfs: merge .d_select_inode() into .d_real()
unify dentry_iput() and dentry_unlink_inode()
binfmt_misc: ->s_root is not going anywhere
drop redundant ->owner initializations
ufs: get rid of redundant checks
orangefs: constify inode_operations
missed comment updates from ->direct_IO() prototype change
file_inode(f)->i_mapping is f->f_mapping
trim fsnotify hooks a bit
9p: new helper - v9fs_parent_fid()
debugfs: ->d_parent is never NULL or negative
...
Changes in this update:
o generic iomap based IO path infrastructure
o generic iomap based fiemap implementation
o xfs iomap based Io path implementation
o buffer error handling fixes
o tracking of in flight buffer IO for unmount serialisation
o direct IO and DAX io path separation and simplification
o shortform directory format definition changes for wider platform compatibility
o various buffer cache fixes
o cleanups in preparation for rmap merge
o error injection cleanups and fixes
o log item format buffer memory allocation restructuring to prevent rare OOM
reclaim deadlocks
o sparse inode chunks are now fully supported.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXmA5XAAoJEK3oKUf0dfodCc0QAKY5Jlfw5HwLria+Ad87HCcM
Zi/LGMMC3CPh+vkbqsmDnLKHYjXRwi3HamBoXdufiE8E3UtOjp/sV98/fCw+zwhe
tHDLmdAx23RLTn7gUhcsIXydKeXh0+HlRxPa4eBAlmnsJ3nGgrKrKQLgDT7Gjlum
nPfRSTYjzm5gs2dpUTYhMV7MplenDW9GFz2uBMct6N9kYQ9m225I99fd/4nb/L7R
o/8UocsK7iREUXP6decDoN9uIAzE2mYR720EL+Txy09CTYy+luNyGoNXOsQtxT5O
plyoPZbzIIDvC44bvp6bZX96Udm7tAeTloieInCZG13I2zJy9gmTmLqkZ3M2at12
kOyeAMSBOWQYSa3uh++FsEP+JGtBTlZXf+4DAYf+U08s8tMVE/61/RZrtJZF4OjW
hyumRBD6zqZ9Y6Qtji2HaA3l9IGxOC2k4URw9JZdDDyMoRTQvawN1QWNAeZINXiv
9ywqTruVsfQnoGDC1Gk1OEfQpubNztTAkEPqVM7ez5dkwOdwuOZXcZPL1Ltvb4Bt
PLaWKLIYFYZKrM5kqgQlTERspSQA99++z8H9a21wFezfetaBby28fIqwMMfQAiSw
nCq95WshJPwenogMtWjNfOgs/fqOBKdPdLFw0H6Jpmjwna2KpuFIZiTnwu25vvjz
dHh4DVSuMTq1pBkXEU7B
=vcSd
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"The major addition is the new iomap based block mapping
infrastructure. We've been kicking this about locally for years, but
there are other filesystems want to use it too (e.g. gfs2). Now it
is fully working, reviewed and ready for merge and be used by other
filesystems.
There are a lot of other fixes and cleanups in the tree, but those are
XFS internal things and none are of the scale or visibility of the
iomap changes. See below for details.
I am likely to send another pull request next week - we're just about
ready to merge some new functionality (on disk block->owner reverse
mapping infrastructure), but that's a huge chunk of code (74 files
changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that
separate to all the "normal" pull request changes so they don't get
lost in the noise.
Summary of changes in this update:
- generic iomap based IO path infrastructure
- generic iomap based fiemap implementation
- xfs iomap based Io path implementation
- buffer error handling fixes
- tracking of in flight buffer IO for unmount serialisation
- direct IO and DAX io path separation and simplification
- shortform directory format definition changes for wider platform
compatibility
- various buffer cache fixes
- cleanups in preparation for rmap merge
- error injection cleanups and fixes
- log item format buffer memory allocation restructuring to prevent
rare OOM reclaim deadlocks
- sparse inode chunks are now fully supported"
* tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits)
xfs: remove EXPERIMENTAL tag from sparse inode feature
xfs: bufferhead chains are invalid after end_page_writeback
xfs: allocate log vector buffers outside CIL context lock
libxfs: directory node splitting does not have an extra block
xfs: remove dax code from object file when disabled
xfs: skip dirty pages in ->releasepage()
xfs: remove __arch_pack
xfs: kill xfs_dir2_inou_t
xfs: kill xfs_dir2_sf_off_t
xfs: split direct I/O and DAX path
xfs: direct calls in the direct I/O path
xfs: stop using generic_file_read_iter for direct I/O
xfs: split xfs_file_read_iter into buffered and direct I/O helpers
xfs: remove s_maxbytes enforcement in xfs_file_read_iter
xfs: kill ioflags
xfs: don't pass ioflags around in the ioctl path
xfs: track and serialize in-flight async buffers against unmount
xfs: exclude never-released buffers from buftarg I/O accounting
xfs: don't reset b_retries to 0 on every failure
xfs: remove extraneous buffer flag changes
...
If the underlying filesystem supports multiple layout types, then there
is little reason not to advertise that fact to clients and let them
choose what type to use.
Turn the ex_layout_type field into a bitfield. For each supported
layout type, we set a bit in that field. When the client requests a
layout, ensure that the bit for that layout type is set. When the
client requests attributes, send back a list of supported types.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Reviewed-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_release_lockowner finds a lock owner that has no lock state,
and drops cl_lock. Then release_lockowner picks up cl_lock and
unhashes the lock owner.
During the window where cl_lock is dropped, I don't see anything
preventing a concurrent nfsd4_lock from finding that same lock owner
and adding lock state to it.
Move release_lockowner() into nfsd4_release_lockowner and hang onto
the cl_lock until after the lock owner's state cannot be found
again.
Found by inspection, we don't currently have a reproducer.
Fixes: 2c41beb0e5 ("nfsd: reduce cl_lock thrashing in ... ")
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These values are all multiples of 4 already, so there's no change in
behavior from this patch. But perhaps this will prevent mistakes in the
future.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Instead of creeping pnfs layout configuration into filesystems, move the
definition of block-based export operations under a more abstract
configuration.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Silent a few smatch warnings about indentation
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Those are now defined in fs/nfsd/vfs.h
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have a simple flex file server where the mds (NFSv4.1 or NFSv4.2)
is also the ds (NFSv3). I.e., the metadata and the data file are
the exact same file.
This will allow testing of the flex file client.
Simply add the "pnfs" export option to your export
in /etc/exports and mount from a client that supports
flex files.
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This addresses the conundrum referenced in RFC5661 18.35.3,
and will allow clients to return state to the server using the
machine credentials.
The biggest part of the problem is that we need to allow the client
to send a compound op with integrity/privacy on mounts that don't
have it enabled.
Add server support for properly decoding and using spo_must_enforce
and spo_must_allow bits. Add support for machine credentials to be
used for CLOSE, OPEN_DOWNGRADE, LOCKU, DELEGRETURN,
and TEST/FREE STATEID.
Implement a check so as to not throw WRONGSEC errors when these
operations are used if integrity/privacy isn't turned on.
Without this, Linux clients with credentials that expired while holding
delegations were getting stuck in an endless loop.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename mach_creds_match() to nfsd4_mach_creds_match() and un-staticify
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use set_posix_acl, which includes proper permission checks, instead of
calling ->set_acl directly. Without this anyone may be able to grant
themselves permissions to a file by setting the ACL.
Lock the inode to make the new checks atomic with respect to set_acl.
(Also, nfsd was the only caller of set_acl not locking the inode, so I
suspect this may fix other races.)
This also simplifies the code, and ensures our ACLs are checked by
posix_acl_valid.
The permission checks and the inode locking were lost with commit
4ac7249e, which changed nfsd to use the set_acl inode operation directly
instead of going through xattr handlers.
Reported-by: David Sinquin <david@sinquin.eu>
[agreunba@redhat.com: use set_posix_acl]
Fixes: 4ac7249e
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Today what is normally called data (the mount options) is not passed
to fill_super through mount_ns.
Pass the mount options and the namespace separately to mount_ns so
that filesystems such as proc that have mount options, can use
mount_ns.
Pass the user namespace to mount_ns so that the standard permission
check that verifies the mounter has permissions over the namespace can
be performed in mount_ns instead of in each filesystems .mount method.
Thus removing the duplication between mqueuefs and proc in terms of
permission checks. The extra permission check does not currently
affect the rpc_pipefs filesystem and the nfsd filesystem as those
filesystems do not currently allow unprivileged mounts. Without
unpvileged mounts it is guaranteed that the caller has already passed
capable(CAP_SYS_ADMIN) which guarantees extra permission check will
pass.
Update rpc_pipefs and the nfsd filesystem to ensure that the network
namespace reference is always taken in fill_super and always put in kill_sb
so that the logic is simpler and so that errors originating inside of
fill_super do not cause a network namespace leak.
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Move the state selection logic inside from the caller,
always making it return correct stp to use.
Signed-off-by: J . Bruce Fields <bfields@fieldses.org>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
To avoid racing entry into nfs4_get_vfs_file().
Make init_open_stateid() return with locked stateid to be unlocked
by the caller.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It used to be the case that state had an rwlock that was locked for write
by downgrades, but for read for upgrades (opens). Well, the problem is
if there are two competing opens for the same state, they step on
each other toes potentially leading to leaking file descriptors
from the state structure, since access mode is a bitmap only set once.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Also simplify the logic a bit.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Trond Myklebust <trondmy@primarydata.com>
On 32-bit:
fs/nfsd/blocklayout.c: In function ‘nfsd4_block_get_device_info_scsi’:
fs/nfsd/blocklayout.c:337: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c:344: warning: integer constant is too large for ‘long’ type
fs/nfsd/blocklayout.c: In function ‘nfsd4_scsi_fence_client’:
fs/nfsd/blocklayout.c:385: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" postfix to 64-bit constant NFSD_MDS_PR_KEY to fix
this.
Fixes: f99d4fbdae ("nfsd: add SCSI layout support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
it's not needed for file_operations of inodes located on fs defined
in the hosting module and for file_operations that go into procfs.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6RP
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A very quiet cycle for nfsd, mainly just an RDMA update from Chuck
Lever"
* tag 'nfsd-4.7' of git://linux-nfs.org/~bfields/linux:
sunrpc: fix stripping of padded MIC tokens
svcrpc: autoload rdma module
svcrdma: Generalize svc_rdma_xdr_decode_req()
svcrdma: Eliminate code duplication in svc_rdma_recvfrom()
svcrdma: Drain QP before freeing svcrdma_xprt
svcrdma: Post Receives only for forward channel requests
svcrdma: Remove superfluous line from rdma_read_chunks()
svcrdma: svc_rdma_put_context() is invoked twice in Send error path
svcrdma: Do not add XDR padding to xdr_buf page vector
svcrdma: Support IPv6 with NFS/RDMA
nfsd: handle seqid wraparound in nfsd4_preprocess_layout_stateid
Remove unnecessary allocation
Pull vfs cleanups from Al Viro:
"More cleanups from Christoph"
* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd: use RWF_SYNC
fs: add RWF_DSYNC aand RWF_SYNC
ceph: use generic_write_sync
fs: simplify the generic_write_sync prototype
fs: add IOCB_SYNC and IOCB_DSYNC
direct-io: remove the offset argument to dio_complete
direct-io: eliminate the offset argument to ->direct_IO
xfs: eliminate the pos variable in xfs_file_dio_aio_write
filemap: remove the pos argument to generic_file_direct_write
filemap: remove pos variables in generic_file_read_iter
An xdr_buf has a head, a vector of pages, and a tail. Each
RPC request is presented to the NFS server contained in an
xdr_buf.
The RDMA transport would like to supply the NFS server with only
the NFS WRITE payload bytes in the page vector. In some common
cases, that would allow the NFS server to swap those pages right
into the target file's page cache.
Have the transport's RDMA Read logic put XDR pad bytes in the tail
iovec, and not in the pages that hold the data payload.
The NFSv3 WRITE XDR decoder is finicky about the lengths involved,
so make sure it is looking in the correct places when computing
the total length of the incoming NFS WRITE request.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the existing static function to an inline helper, and call it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MToz
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux
Pull more nfsd updates from Bruce Fields:
"Apologies for the previous request, which omitted the top 8 commits
from my for-next branch (including the SCSI layout commits). Thanks
to Trond for spotting my error!"
This actually includes the new layout types, so here's that part of
the pull message repeated:
"Support for a new pnfs layout type from Christoph Hellwig. The new
layout type is a variant of the block layout which uses SCSI features
to offer improved fencing and device identification.
Note this pull request also includes the client side of SCSI layout,
with Trond's permission"
* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
nfsd: use short read as well as i_size to set eof
nfsd: better layoutupdate bounds-checking
nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
nfsd: add SCSI layout support
nfsd: move some blocklayout code
nfsd: add a new config option for the block layout driver
nfs/blocklayout: add SCSI layout support
nfs4.h: add SCSI layout definitions
pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mY8w
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Various bugfixes, a RDMA update from Chuck Lever, and support for a
new pnfs layout type from Christoph Hellwig. The new layout type is a
variant of the block layout which uses SCSI features to offer improved
fencing and device identification.
(Also: note this pull request also includes the client side of SCSI
layout, with Trond's permission.)"
* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
nfsd: recover: fix memory leak
nfsd: fix deadlock secinfo+readdir compound
nfsd4: resfh unused in nfsd4_secinfo
svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
svcrdma: Remove close_out exit path
svcrdma: Hook up the logic to return ERR_CHUNK
svcrdma: Use correct XID in error replies
svcrdma: Make RDMA_ERROR messages work
rpcrdma: Add RPCRDMA_HDRLEN_ERR
svcrdma: svc_rdma_post_recv() should close connection on error
svcrdma: Close connection when a send error occurs
nfsd: Lower NFSv4.1 callback message size limit
svcrdma: Do not send Write chunk XDR pad with inline content
svcrdma: Do not write xdr_buf::tail in a Write chunk
svcrdma: Find client-provided write and reply chunks once per reply
nfsd: Update NFS server comments related to RDMA support
nfsd: Fix a memory leak when meeting unsupported state_protect_how4
nfsd4: fix bad bounds checking
Use the result of a local read to determine when to set the eof flag. This
allows us to return the location of the end of the file atomically at the
time of the read.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[bfields: add some documentation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
You could add any multiple of 2^32/PNFS_SCSI_RANGE_SIZE to nr_iomaps and
still pass this check. You'd probably still fail the following kcalloc,
but best to be paranoid since this is from-the-wire data.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
This is a simple extension to the block layout driver to use SCSI
persistent reservations for access control and fencing, as well as
SCSI VPD pages for device identification.
For this we need to pass the nfs4_client to the proc_getdeviceinfo method
to generate the reservation key, and add a new fence_client method
to allow for fence actions in the layout driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Trivial reorganization, no change in behavior. Move some code around,
pull some code out of block layoutcommit that will be useful for the
scsi layout.
[bfields@redhat.com: split off from "nfsd: add SCSI layout support"]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split the config symbols into a generic pNFS one, which is invisible
and gets selected by the layout drivers, and one for the block layout
driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_cltrack_grace_start() will allocate the memory for grace_start but
when we returned due to error we missed freeing it.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd_lookup_dentry exits with the parent filehandle locked. fh_put also
unlocks if necessary (nfsd filehandle locking is probably too lenient),
so it gets unlocked eventually, but if the following op in the compound
needs to lock it again, we can deadlock.
A fuzzer ran into this; normal clients don't send a secinfo followed by
a readdir in the same compound.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This way we can set kiocb flags also from the sync read/write path for
the read_iter/write_iter operations. For now there is no way to pass
flags to plain read/write operations as there is no real need for that,
and all flags passed are explicitly rejected for these files.
Signed-off-by: Milosz Tanski <milosz@adfin.com>
[hch: rebased on top of my kiocb changes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stephen Bates <stephen.bates@pmcs.com>
Tested-by: Stephen Bates <stephen.bates@pmcs.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The maximum size of a backchannel message on RPC-over-RDMA depends
on the connection's inline threshold. Today that threshold is
typically 1024 bytes, making the maximum message size 996 bytes.
The Linux server's CREATE_SESSION operation checks that the size
of callback Calls can be as large as 1044 bytes, to accommodate
RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the
true message size maximum of 996 bytes.
But the server's backchannel currently does not support RPCSEC_GSS.
The actual maximum size it needs is much smaller. It is safe to
reduce the limit to enable NFSv4.1 on RDMA backchannel operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server does indeed now support NFSv4.1 on RDMA transports. It
does not support shifting an RDMA-capable TCP transport (such as
iWARP) to RDMA mode.
Reported-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remember free allocated client when meeting unsupported state protect how.
Fixes: 50c7b948ad ("nfsd: minor consolidation of mach_cred handling code")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A number of spots in the xdr decoding follow a pattern like
n = be32_to_cpup(p++);
READ_BUF(n + 4);
where n is a u32. The only bounds checking is done in READ_BUF itself,
but since it's checking (n + 4), it won't catch cases where n is very
large, (u32)(-4) or higher. I'm not sure exactly what the consequences
are, but we've seen crashes soon after.
Instead, just break these up into two READ_BUF()s.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK storms
that can affect some high-availability NFS setups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G7V3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Smaller bugfixes and cleanup, including a fix for a failures of
kerberized NFSv4.1 mounts, and Scott Mayhew's work addressing ACK
storms that can affect some high-availability NFS setups"
* tag 'nfsd-4.5' of git://linux-nfs.org/~bfields/linux:
nfsd: add new io class tracepoint
nfsd: give up on CB_LAYOUTRECALLs after two lease periods
nfsd: Fix nfsd leaks sunrpc module references
lockd: constify nlmsvc_binding structure
lockd: use to_delayed_work
nfsd: use to_delayed_work
Revert "svcrdma: Do not send XDR roundup bytes for a write chunk"
lockd: Register callbacks on the inetaddr_chain and inet6addr_chain
nfsd: Register callbacks on the inetaddr_chain and inet6addr_chain
sunrpc: Add a function to close temporary transports immediately
nfsd: don't base cl_cb_status on stale information
nfsd4: fix gss-proxy 4.1 mounts for some AD principals
nfsd: fix unlikely NULL deref in mach_creds_match
nfsd: minor consolidation of mach_cred handling code
nfsd: helper for dup of possibly NULL string
svcrpc: move some initialization to common code
nfsd: fix a warning message
nfsd: constify nfsd4_callback_ops structure
nfsd: recover: constify nfsd4_client_tracking_ops structures
svcrdma: Do not send XDR roundup bytes for a write chunk
Add some new tracepoints in the nfsd read/write codepaths. The idea
is that this will give us the ability to measure how long each phase of
a read or write operation takes.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
Pull vfs copy_file_range updates from Al Viro:
"Several series around copy_file_range/CLONE"
* 'work.copy_file_range' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: use new dedupe data function pointer
vfs: hoist the btrfs deduplication ioctl to the vfs
vfs: wire up compat ioctl for CLONE/CLONE_RANGE
cifs: avoid unused variable and label
nfsd: implement the NFSv4.2 CLONE operation
nfsd: Pass filehandle to nfs4_preprocess_stateid_op()
vfs: pull btrfs clone API to vfs layer
locks: new locks_mandatory_area calling convention
vfs: Add vfs_copy_file_range() support for pagecache copies
btrfs: add .copy_file_range file operation
x86: add sys_copy_file_range to syscall tables
vfs: add copy_file_range syscall and vfs helper
We need information about exports when crossing mountpoints during
lookup or NFSv4 readdir. If we don't already have that information
cached, we may have to ask (and wait for) rpc.mountd.
In both cases we currently hold the i_mutex on the parent of the
directory we're asking rpc.mountd about. We've seen situations where
rpc.mountd performs some operation on that directory that tries to take
the i_mutex again, resulting in deadlock.
With some care, we may be able to avoid that in rpc.mountd. But it
seems better just to avoid holding a mutex while waiting on userspace.
It appears that lookup_one_len is pretty much the only operation that
needs the i_mutex. So we could just drop the i_mutex elsewhere and do
something like
mutex_lock()
lookup_one_len()
mutex_unlock()
In many cases though the lookup would have been cached and not required
the i_mutex, so it's more efficient to create a lookup_one_len() variant
that only takes the i_mutex when necessary.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Have the CB_LAYOUTRECALL code treat NFS4_OK and NFS4ERR_DELAY returns
equivalently. Change the code to periodically resend CB_LAYOUTRECALLS
until the ls_layouts list is empty or the client returns a different
error code.
If we go for two lease periods without the list being emptied or the
client sending a hard error, then we give up and clean out the list
anyway.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nlmsvc_binding structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Register callbacks on inetaddr_chain and inet6addr_chain to trigger
cleanup of nfsd transport sockets when an ip address is deleted.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The rpc client we use to send callbacks may change occasionally. (In
the 4.0 case, the client can use setclientid/setclientid_confirm to
update the callback parameters. In the 4.1+ case, sessions and
connections can come and go.)
The update is done from the callback thread by nfsd4_process_cb_update,
which shuts down the old rpc client and then creates a new one.
The client shutdown kills any ongoing rpc calls. There won't be any new
ones till the new one's created and the callback thread moves on.
When an rpc encounters a problem that may suggest callback rpc's
aren't working any longer, it normally sets NFSD4_CB_DOWN, so the server
can tell the client something's wrong.
But if the rpc notices CB_UPDATE is set, then the failure may just be a
normal result of shutting down the callback client. Or it could just be
a coincidence, but in any case, it means we're runing with the old
about-to-be-discarded client, so the failure's not interesting.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We do need to serialize layout stateid morphing operations, but we
currently hold the ls_mutex across a layout recall which is pretty
ugly. It's also unnecessary -- once we've bumped the seqid and
copied it, we don't need to serialize the rest of the CB_LAYOUTRECALL
vs. anything else. Just drop the mutex once the copy is done.
This was causing a "workqueue leaked lock or atomic" warning and an
occasional deadlock.
There's more work to be done here but this fixes the immediate
regression.
Fixes: cc8a55320b "nfsd: serialize layout stateid morphing operations"
Cc: stable@vger.kernel.org
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is basically a remote version of the btrfs CLONE operation,
so the implementation is fairly trivial. Made even more trivial
by stealing the XDR code and general framework Anna Schumaker's
COPY prototype.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This will be needed so COPY can look up the saved_fh in addition to the
current_fh.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The principal name on a gss cred is used to setup the NFSv4.0 callback,
which has to have a client principal name to authenticate to.
That code wants the name to be in the form servicetype@hostname.
rpc.svcgssd passes down such names (and passes down no principal name at
all in the case the principal isn't a service principal).
gss-proxy always passes down the principal name, and passes it down in
the form servicetype/hostname@REALM. So we've been munging the name
gss-proxy passes down into the format the NFSv4.0 callback code expects,
or throwing away the name if we can't.
Since the introduction of the MACH_CRED enforcement in NFSv4.1, we've
also been using the principal name to verify that certain operations are
done as the same principal as was used on the original EXCHANGE_ID call.
For that application, the original name passed down by gss-proxy is also
useful.
Lack of that name in some cases was causing some kerberized NFSv4.1
mount failures in an Active Directory environment.
This fix only works in the gss-proxy case. The fix for legacy
rpc.svcgssd would be more involved, and rpc.svcgssd already has other
problems in the AD case.
Reported-and-tested-by: James Ralston <ralston@pobox.com>
Acked-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We really shouldn't allow a client to be created with cl_mach_cred set
unless it also has a principal name.
This also allows us to fail such cases immediately on EXCHANGE_ID as
opposed to waiting and incorrectly returning WRONG_CRED on the following
CREATE_SESSION.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Technically the initialization in the NULL case isn't even needed as the
only caller already has target zeroed out, but it seems safer to keep
copy_cred generic.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The WARN() macro takes a condition and a format string. The condition
was accidentally left out here so it just prints the function name
instead of the message.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd4_callback_ops structure is never modified, so declare it as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsd4_client_tracking_ops structures are never modified, so declare
them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We observed multiple open stateids on the server for files that
seemingly should have been closed.
nfsd4_process_open2() tests for the existence of a preexisting
stateid. If one is not found, the locks are dropped and a new
one is created. The problem is that init_open_stateid(), which
is also responsible for hashing the newly initialized stateid,
doesn't check to see if another open has raced in and created
a matching stateid. This fix is to enable init_open_stateid() to
return the matching stateid and have nfsd4_process_open2()
swap to that stateid and switch to the open upgrade path.
In testing this patch, coverage to the newly created
path indicates that the race was indeed happening.
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've observed the nfsd server in a state where there are
multiple delegations on the same nfs4_file for the same client.
The nfs client does attempt to DELEGRETURN these when they are presented to
it - but apparently under some (unknown) circumstances the client does not
manage to return all of them. This leads to the eventual
attempt to CB_RECALL more than one delegation with the same nfs
filehandle to the same client. The first recall will succeed, but the
next recall will fail with NFS4ERR_BADHANDLE. This leads to the server
having delegations on cl_revoked that the client has no way to FREE
or DELEGRETURN, with resulting inability to recover. The state manager
on the server will continually assert SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the state manager on the client will be looping unable to satisfy
the server.
List discussion also reports a race between OPEN and DELEGRETURN that
will be avoided by only sending the delegation once to the
client. This is also logically in accordance with RFC5561 9.1.1 and 10.2.
So, let's:
1.) Not hand out duplicate delegations.
2.) Only send them to the client once.
RFC 5561:
9.1.1:
"Delegations and layouts, on the other hand, are not associated with a
specific owner but are associated with the client as a whole
(identified by a client ID)."
10.2:
"...the stateid for a delegation is associated with a client ID and may be
used on behalf of all the open-owners for the given client. A
delegation is made to the client as a whole and not to any specific
process or thread of control within it."
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We have a shrinker, we clean out the cache when nfsd is shut down, and
prune the chains on each request. A recurring workqueue job seems like
unnecessary overhead. Just remove it.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce points out that the increment of the seqid in stateids is not
serialized in any way, so it's possible for racing calls to bump it
twice and end up sending the same stateid. While we don't have any
reports of this problem it _is_ theoretically possible, and could lead
to spurious state recovery by the client.
In the current code, update_stateid is always followed by a memcpy of
that stateid, so we can combine the two operations. For better
atomicity, we add a spinlock to the nfs4_stid and hold that when bumping
the seqid and copying the stateid.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In order to allow the client to make a sane determination of what
happened with racing LAYOUTGET/LAYOUTRETURN/CB_LAYOUTRECALL calls, we
must ensure that the seqids return accurately represent the order of
operations. The simplest way to do that is to ensure that operations on
a single stateid are serialized.
This patch adds a mutex to the layout stateid, and locks it when
checking the layout stateid's seqid. The mutex is held over the entire
operation and released after the seqid is bumped.
Note that in the case of CB_LAYOUTRECALL we must move the increment of
the seqid and setting into a new cb "prepare" operation. The lease
infrastructure will call the lm_break callback with a spinlock held, so
and we can't take the mutex in that codepath.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
At least in the v4.0 case openowners can hang around for a while after
last close, but they shouldn't really block (for example), a new mount
with a different principal.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In bakeathon testing Solaris client was getting CLID_INUSE error when
doing a krb5 mount soon after an auth_sys mount, or vice versa.
That's not really necessary since in this case the old client doesn't
have any state any more:
http://tools.ietf.org/html/rfc7530#page-103
"when the server gets a SETCLIENTID for a client ID that
currently has no state, or it has state but the lease has
expired, rather than returning NFS4ERR_CLID_INUSE, the server
MUST allow the SETCLIENTID and confirm the new client ID if
followed by the appropriate SETCLIENTID_CONFIRM."
This doesn't fix the problem completely since our client_has_state()
check counts openowners left around to handle close replays, which we
should probably just remove in this case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Any file which includes trace.h will need to include state.h, even if
they aren't using any state tracepoints. Ensure that we include any
headers that might be needed in trace.h instead of relying on the
*.c files to have the right ones.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This moves the hole in the struct down below the flags fields, which
allows us to potentially add a new flag without growing the struct.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove unneeded NULL test.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@ expression x; @@
-if (x != NULL) {
\(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
x = NULL;
-}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Andrew was seeing a race occur when an OPEN and OPEN_DOWNGRADE were
running in parallel. The server would receive the OPEN_DOWNGRADE first
and check its seqid, but then an OPEN would race in and bump it. The
OPEN_DOWNGRADE would then complete and bump the seqid again. The result
was that the OPEN_DOWNGRADE would be applied after the OPEN, even though
it should have been rejected since the seqid changed.
The only recourse we have here I think is to serialize operations that
bump the seqid in a stateid, particularly when we're given a seqid in
the call. To address this, we add a new rw_semaphore to the
nfs4_ol_stateid struct. We do a down_write prior to checking the seqid
after looking up the stateid to ensure that nothing else is going to
bump it while we're operating on it.
In the case of OPEN, we do a down_read, as the call doesn't contain a
seqid. Those can run in parallel -- we just need to serialize them when
there is a concurrent OPEN_DOWNGRADE or CLOSE.
LOCK and LOCKU however always take the write lock as there is no
opportunity for parallelizing those.
Reported-and-Tested-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Recent Linux clients have started to send GETLAYOUT requests with
minlength less than blocksize.
Servers aren't really allowed to impose this kind of restriction on
layouts; see RFC 5661 section 18.43.3 for details.
This has been observed to cause indefinite hangs on fsx runs on some
clients.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2 client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation issues.
- pnfs/flexfiles: error handling retries a layoutget before fallback to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr() verbs
from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=knJA
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix atomicity of pNFS commit list updates
- Fix NFSv4 handling of open(O_CREAT|O_EXCL|O_RDONLY)
- nfs_set_pgio_error sometimes misses errors
- Fix a thinko in xs_connect()
- Fix borkage in _same_data_server_addrs_locked()
- Fix a NULL pointer dereference of migration recovery ops for v4.2
client
- Don't let the ctime override attribute barriers.
- Revert "NFSv4: Remove incorrect check in can_open_delegated()"
- Ensure flexfiles pNFS driver updates the inode after write finishes
- flexfiles must not pollute the attribute cache with attrbutes from
the DS
- Fix a protocol error in layoutreturn
- Fix a protocol issue with NFSv4.1 CLOSE stateids
Bugfixes + cleanups
- pNFS blocks bugfixes from Christoph
- Various cleanups from Anna
- More fixes for delegation corner cases
- Don't fsync twice for O_SYNC/IS_SYNC files
- Fix pNFS and flexfiles layoutstats bugs
- pnfs/flexfiles: avoid duplicate tracking of mirror data
- pnfs: Fix layoutget/layoutreturn/return-on-close serialisation
issues
- pnfs/flexfiles: error handling retries a layoutget before fallback
to MDS
Features:
- Full support for the OPEN NFS4_CREATE_EXCLUSIVE4_1 mode from
Kinglong
- More RDMA client transport improvements from Chuck
- Removal of the deprecated ib_reg_phys_mr() and ib_rereg_phys_mr()
verbs from the SUNRPC, Lustre and core infiniband tree.
- Optimise away the close-to-open getattr if there is no cached data"
* tag 'nfs-for-4.3-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (108 commits)
NFSv4: Respect the server imposed limit on how many changes we may cache
NFSv4: Express delegation limit in units of pages
Revert "NFS: Make close(2) asynchronous when closing NFS O_DIRECT files"
NFS: Optimise away the close-to-open getattr if there is no cached data
NFSv4.1/flexfiles: Clean up ff_layout_write_done_cb/ff_layout_commit_done_cb
NFSv4.1/flexfiles: Mark the layout for return in ff_layout_io_track_ds_error()
nfs: Remove unneeded checking of the return value from scnprintf
nfs: Fix truncated client owner id without proto type
NFSv4.1/flexfiles: Mark layout for return if the mirrors are invalid
NFSv4.1/flexfiles: RW layouts are valid only if all mirrors are valid
NFSv4.1/flexfiles: Fix incorrect usage of pnfs_generic_mark_devid_invalid()
NFSv4.1/flexfiles: Fix freeing of mirrors
NFSv4.1/pNFS: Don't request a minimal read layout beyond the end of file
NFSv4.1/pnfs: Handle LAYOUTGET return values correctly
NFSv4.1/pnfs: Don't ask for a read layout for an empty file.
NFSv4.1: Fix a protocol issue with CLOSE stateids
NFSv4.1/flexfiles: Don't mark the entire deviceid as bad for file errors
SUNRPC: Prevent SYN+SYNACK+RST storms
SUNRPC: xs_reset_transport must mark the connection as disconnected
NFSv4.1/pnfs: Ensure layoutreturn reserves space for the opaque payload
...
We have observed the server sending recalls for delegation stateids
that have already been successfully returned. Change
nfsd4_cb_recall_done() to return success if the client has returned
the delegation. While this does not completely eliminate the sending
of recalls for delegations that have already been returned, this
does prevent unnecessarily declaring the callback path to be down.
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Acked-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Somebody with a Solaris client was hitting this case. We haven't
figured out why yet, and don't have a reproducer. Meanwhile Frank
noticed that RFC 7530 actually recommends CLID_INUSE for this case.
Unlikely to help the original reporter, but may as well fix it.
Reported-by: Frank Filz <ffilzlnx@mindspring.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's possible that a DELEGRETURN could race with (e.g.) client expiry,
in which case we could end up putting the delegation hash reference more
than once.
Have unhash_delegation_locked return a bool that indicates whether it
was already unhashed. In the case of destroy_delegation we only
conditionally put the hash reference if that returns true.
The other callers of unhash_delegation_locked call it while walking
list_heads that shouldn't yet be detached. If we find that it doesn't
return true in those cases, then throw a WARN_ON as that indicates that
we have a partially hashed delegation, and that something is likely very
wrong.
Tested-by: Andrew W Elble <aweits@rit.edu>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When an open or lock stateid is hashed, we take an extra reference to
it. When we unhash it, we drop that reference. The code however does
not properly account for the case where we have two callers concurrently
trying to unhash the stateid. This can lead to list corruption and the
hash reference being put more than once.
Fix this by having unhash_ol_stateid use list_del_init on the st_perfile
list_head, and then testing to see if that list_head is empty before
releasing the hash reference. This means that some of the unhashing
wrappers now become bool return functions so we can test to see whether
the stateid was unhashed before we put the reference.
Reported-by: Andrew W Elble <aweits@rit.edu>
Tested-by: Andrew W Elble <aweits@rit.edu>
Reported-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Tested-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We can potentially have several nfs4_laundromat jobs running if there
are multiple namespaces running nfsd on the box. Those are effectively
separated from one another though, so I don't see any reason to
serialize them.
Also, create_singlethread_workqueue automatically adds the
WQ_MEM_RECLAIM flag. Since we run this job on a timer, it's not really
involved in any reclaim paths. I see no need for a rescuer thread.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These messages, combined with the backtrace they trigger, makes it seem
like a serious problem, though a quick search shows distros marking
it as a "won't fix" non-issue when the problem is reported by users.
The backtrace is overkill, and only really manages to show that if
you follow the code path, you can't really avoid it with bootargs
or configuration settings in the container.
Given that, lets tone it down a bit and get rid of the WARN severity,
and the associated backtrace, so people aren't needlessly alarmed.
Also, lets drop the split printk line, since they are grep unfriendly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Security label can be set in OPEN/CREATE request, nfsd should set
the bitmask in word2 if setting success.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to rfc5661 18.16.4,
"If EXCLUSIVE4_1 was used, the client determines the attributes
used for the verifier by comparing attrset with cva_attrs.attrmask;"
So, EXCLUSIVE4_1 also needs those bitmask used to store the verifier.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The encode order should be as the bitmask defined order.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently we'll respond correctly to a request for either
FS_LAYOUT_TYPES or LAYOUT_TYPES, but not to a request for both
attributes simultaneously.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After commit ae7095a7c4 (nfsd4: helper function for getting mounted_on
ino) we ignore the return value from get_parent_attributes().
Also, the following FATTR4_WORD2_LAYOUT_BLKSIZE uses stat.blksize, so to
avoid overwriting that, use an independent value for the parent's
attributes.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NLM locks don't conflict with NFSv4 share reservations, so we're not
going to learn anything new by watiting for them.
They do conflict with NFSv4 locks and with delegations.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
export.h refers to the pnfs_layouttype enum, which is defined there.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nfsd has implement a site of seq_operations functions as sunrpc's cache.
Just exports sunrpc's codes, and remove nfsd's redundant codes.
v8, same as v6
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to Christoph's advice, this patch introduce a new helper
nfsd4_cb_sequence_done() for processing more callback errors, following
the example of the client's nfs41_sequence_done().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 294ac32e99 "nfsd: protect clid and verifier generation with
client_lock" moved gen_confirm() to gen_clid().
After that commit, setclientid will return a bad reply with all-zero
verifier after copy_clid().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If using clientid_counter, it seems possible that gen_confirm could
generate the same verifier for the same client in some situations.
Add a new counter for client confirm verifier to make sure gen_confirm
generates a different verifier on each call for the same clientid.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v2, new helper nfs4_free_stateowner for freeing so_owner.data and sop
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Layout is a state resource, nfsd should check it too.
v2, drop unneeded updating in nfsd4_renew()
v3, fix compile error without CONFIG_NFSD_PNFS
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an operation that will do setup of the service. In the case of a
classic thread-based service that means starting up threads. In the case
of a workqueue-based service, the setup will do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirliey.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For now, all services use svc_xprt_do_enqueue, but once we add
workqueue-based service support, we'll need to do something different.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...not technically an operation, but it's more convenient and cleaner
to pass the module pointer in this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we now have a container for holding svc_serv operations, move the
sv_function into it as well.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches we'll need to abstract out more operations on a
per-service level, besides sv_shutdown and sv_function.
Declare a new svc_serv_ops struct to hold these operations, and move
sv_shutdown into this struct.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, preprocess_stateid_op calls nfs4_check_olstateid which
verifies that the open stateid corresponds to the current filehandle in the
call by calling nfs4_check_fh.
If the stateid is a NFS4_DELEG_STID however, then no such check is done.
This could cause incorrect enforcement of permissions, because the
nfsd_permission() call in nfs4_check_file uses current the current
filehandle, but any subsequent IO operation will use the file descriptor
in the stateid.
Move the call to nfs4_check_fh into nfs4_check_file instead so that it
can be done for all stateid types.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
[bfields: moved fh check to avoid NULL deref in special stateid case]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After proc_layoutcommit success, i_size_read(inode) always >= new_size.
Just set lc_size_chg before proc_layoutcommit, if proc_layoutcommit
failed, nfsd will skip the lc_size_chg, so it's no harm.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If lookup_one_len() failed, nfsd should free those memory allocated for fname.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfsd4_layout_setlease fails, nfsd will not put ls->ls_file.
Fix commit c5c707f96f "nfsd: implement pNFS layout recalls".
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the hack where we fput the read-specific file in generic code.
Instead we can do it in nfsd4_encode_read as that gets called for all
error cases as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch changes nfs4_preprocess_stateid_op so it always returns
a valid struct file if it has been asked for that. For that we
now allocate a temporary struct file for special stateids, and check
permissions if we got the file structure from the stateid. This
ensures that all callers will get their handling of special stateids
right, and avoids code duplication.
There is a little wart in here because the read code needs to know
if we allocated a file structure so that it can copy around the
read-ahead parameters. In the long run we should probably aim to
cache full file structures used with special stateids instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Split out two self contained helpers to make the function more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Refactor the raparam hash helpers to just deal with the raparms,
and keep opening/closing files separate from that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use kernel.h macro definition.
Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When testing pnfs layout, nfsd got error NFS4ERR_SEQ_MISORDERED.
It is caused by nfs return NFS4ERR_DELAY before validate_seqid(),
don't update the sequnce id, but nfsd updates the sequnce id !!!
According to RFC5661 20.9.3,
" If CB_SEQUENCE returns an error, then the state of the slot
(sequence ID, cached reply) MUST NOT change. "
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd enters a infinite loop and prints message every 10 seconds:
May 31 18:33:52 test-server kernel: Error sending entire callback!
May 31 18:34:01 test-server kernel: Error sending entire callback!
This is caused by a cb_layoutreturn getting error -10008
(NFS4ERR_DELAY), the client crashing, and then nfsd entering the
infinite loop:
bc_sendto --> call_timeout --> nfsd4_cb_done --> nfsd4_cb_layout_done
with error -10008 --> rpc_delay(task, HZ/100) --> bc_sendto ...
Reproduced using xfstests 074 with nfs client's kdump on,
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT set, and client's blkmapd down:
1. nfs client's write operation will get the layout of file,
and then send getdeviceinfo,
2. but layout segment is not recorded by client because blkmapd is down,
3. client writes data by sending WRITE to server,
4. nfs server recalls the layout of the file before WRITE,
5. network error causes the client reset the session and return NFS4ERR_DELAY,
6. so client's WRITE operation is waiting the reply.
If the task hangs 120s, the client will crash.
7. so that, the next bc_sendto will fail with TIMEOUT,
and cb_status is NFS4ERR_DELAY.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
gcc-5.0 warns about a potential uninitialized variable use in nfsd:
fs/nfsd/nfs4state.c: In function 'nfsd4_process_open2':
fs/nfsd/nfs4state.c:3781:3: warning: 'old_deny_bmap' may be used uninitialized in this function [-Wmaybe-uninitialized]
reset_union_bmap_deny(old_deny_bmap, stp);
^
fs/nfsd/nfs4state.c:3760:16: note: 'old_deny_bmap' was declared here
unsigned char old_deny_bmap;
^
This is a false positive, the code path that is warned about cannot
actually be reached.
This adds an initialization for the variable to make the warning go
away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Whether or not a file system supports acls can be determined with
IS_POSIXACL(inode) and does not require trying to fetch any acls; the code for
computing the supported_attrs and aclsupport attributes can be simplified.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSv2 can set the atime and/or mtime of a file to specific timestamps but not
to the server's current time. To implement the equivalent of utimes("file",
NULL), it uses a heuristic.
NFSv3 and later do support setting the atime and/or mtime to the server's
current time directly. The NFSv2 heuristic is still enabled, and causes
timestamps to be set wrong sometimes.
Fix this by moving the heuristic into the NFSv2 specific code. We can leave it
out of the create code path: the owner can always set timestamps arbitrarily,
and the workaround would never trigger.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The NFSv3 READDIRPLUS gets some of the returned attributes from the
readdir, and some from an inode returned from a new lookup. The two
objects could be different thanks to intervening renames.
The attributes in READDIRPLUS are optional, so let's just skip them if
we notice this case.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With sessions in v4.1 or later we don't need to manually probe the backchannel
connection, so we can declare it up instantly after setting up the RPC client.
Note that we really should split nfsd4_run_cb_work in the long run, this is
just the least intrusive fix for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Checking the rpc_client pointer is not a reliable way to detect
backchannel changes: cl_cb_client is changed only after shutting down
the rpc client, so the condition cl_cb_client = tk_client will always be
true.
Check the RPC_TASK_KILLED flag instead, and rewrite the code to avoid
the buggy cl_callbacks list and fix the lifetime rules due to double
calls of the ->prepare callback operations method for this retry case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We must only increment the sequence id if the client has seen and responded
to a request. If we failed to deliver it to the client we must resend with
the same sequence id. So just like the client track errors at the transport
level differently from those returned in the XDR.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For the sake of forgetful clients, the server should return the layouts
to the file system on 'last close' of a file (assuming that there are no
delegations outstanding to that particular client) or on delegreturn
(assuming that there are no opens on a file from that particular
client).
In theory the information is all there in current data structures, but
it's not efficiently available; nfs4_file->fi_ref includes references on
the file across all clients, but we need a per-(client, file) count.
Walking through lots of stateid's to calculate this on each close or
delegreturn would be painful.
This patch introduces infrastructure to maintain per-client opens and
delegation counters on a per-file basis.
[hch: ported to the mainline pNFS support, merged various fixes from Jeff]
Signed-off-by: Sachin Bhamare <sachin.bhamare@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If we find a non-confirmed openowner we jump to exit the function, but do
not set an error value. Fix this by factoring out a helper to do the
check and properly set the error from nfsd4_validate_stateid.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit df52699e4f ("NFSv4.1: Don't cache deviceids that have no
notifications") causes the Linux NFS client to stop caching deviceid's
unless a server pretends to support deviceid notifications. While this
behavior is stupid and the language around this area in rfc5661 is a
mess carified by an errata that I submittted, Trond insists on this
behavior. Not caching deviceids degrades block layout performance
massively as a GETDEVICEINFO is fairly expensive.
So add this hack to make the Linux client happy again.
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull nfsd updates from Bruce Fields:
"A quiet cycle this time; this is basically entirely bugfixes.
The few that aren't cc'd to stable are cleanup or seemed unlikely to
affect anyone much"
* 'for-4.1' of git://linux-nfs.org/~bfields/linux:
uapi: Remove kernel internal declaration
nfsd: fix nsfd startup race triggering BUG_ON
nfsd: eliminate NFSD_DEBUG
nfsd4: fix READ permission checking
nfsd4: disallow SEEK with special stateids
nfsd4: disallow ALLOCATE with special stateids
nfsd: add NFSEXP_PNFS to the exflags array
nfsd: Remove duplicate macro define for max sec label length
nfsd: allow setting acls with unenforceable DENYs
nfsd: NFSD_FAULT_INJECTION depends on DEBUG_FS
nfsd: remove unused status arg to nfsd4_cleanup_open_state
nfsd: remove bogus setting of status in nfsd4_process_open2
NFSD: Use correct reply size calculating function
NFSD: Using path_equal() for checking two paths
nfsd triggered a BUG_ON in net_generic(...) when rpc_pipefs_event(...)
in fs/nfsd/nfs4recover.c was called before assigning ntfsd_net_id.
The following was observed on a MIPS 32-core processor:
kernel: Call Trace:
kernel: [<ffffffffc00bc5e4>] rpc_pipefs_event+0x7c/0x158 [nfsd]
kernel: [<ffffffff8017a2a0>] notifier_call_chain+0x70/0xb8
kernel: [<ffffffff8017a4e4>] __blocking_notifier_call_chain+0x4c/0x70
kernel: [<ffffffff8053aff8>] rpc_fill_super+0xf8/0x1a0
kernel: [<ffffffff8022204c>] mount_ns+0xb4/0xf0
kernel: [<ffffffff80222b48>] mount_fs+0x50/0x1f8
kernel: [<ffffffff8023dc00>] vfs_kern_mount+0x58/0xf0
kernel: [<ffffffff802404ac>] do_mount+0x27c/0xa28
kernel: [<ffffffff80240cf0>] SyS_mount+0x98/0xe8
kernel: [<ffffffff80135d24>] handle_sys64+0x44/0x68
kernel:
kernel:
Code: 0040f809 00000000 2e020001 <00020336> 3c12c00d
3c02801a de100000 6442eb98 0040f809
kernel: ---[ end trace 7471374335809536 ]---
Fixed this behaviour by calling register_pernet_subsys(&nfsd_net_ops) before
registering rpc_pipefs_event(...) with the notifier chain.
Signed-off-by: Giuseppe Cantavenera <giuseppe.cantavenera.ext@nokia.com>
Signed-off-by: Lorenzo Restelli <lorenzo.restelli.ext@nokia.com>
Reviewed-by: Kinlong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit f895b252d4 ("sunrpc: eliminate RPC_DEBUG") introduced
use of IS_ENABLED() in a uapi header which leads to a build
failure for userspace apps trying to use <linux/nfsd/debug.h>:
linux/nfsd/debug.h:18:15: error: missing binary operator before token "("
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
^
Since this was only used to define NFSD_DEBUG if CONFIG_SUNRPC_DEBUG
is enabled, replace instances of NFSD_DEBUG with CONFIG_SUNRPC_DEBUG.
Cc: stable@vger.kernel.org
Fixes: f895b252d4 "sunrpc: eliminate RPC_DEBUG"
Signed-off-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the case we already have a struct file (derived from a stateid), we
still need to do permission-checking; otherwise an unauthorized user
could gain access to a file by sniffing or guessing somebody else's
stateid.
Cc: stable@vger.kernel.org
Fixes: dc97618ddd "nfsd4: separate splice and readv cases"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client uses a special stateid then we'll pass a NULL file to
vfs_llseek.
Fixes: 24bab49122 " NFSD: Implement SEEK"
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: stable@vger.kernel.org
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
vfs_fallocate will hit a NULL dereference if the client tries an
ALLOCATE or DEALLOCATE with a special stateid. Fix that. (We also
depend on the open to have broken any conflicting leases or delegations
for us.)
(If it turns out we need to allow special stateid's then we could do a
temporary open here in the special-stateid case, as we do for read and
write. For now I'm assuming it's not necessary.)
Fixes: 95d871f03c "nfsd: Add ALLOCATE support"
Cc: stable@vger.kernel.org
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Merge second patchbomb from Andrew Morton:
- the rest of MM
- various misc bits
- add ability to run /sbin/reboot at reboot time
- printk/vsprintf changes
- fiddle with seq_printf() return value
* akpm: (114 commits)
parisc: remove use of seq_printf return value
lru_cache: remove use of seq_printf return value
tracing: remove use of seq_printf return value
cgroup: remove use of seq_printf return value
proc: remove use of seq_printf return value
s390: remove use of seq_printf return value
cris fasttimer: remove use of seq_printf return value
cris: remove use of seq_printf return value
openrisc: remove use of seq_printf return value
ARM: plat-pxa: remove use of seq_printf return value
nios2: cpuinfo: remove use of seq_printf return value
microblaze: mb: remove use of seq_printf return value
ipc: remove use of seq_printf return value
rtc: remove use of seq_printf return value
power: wakeup: remove use of seq_printf return value
x86: mtrr: if: remove use of seq_printf return value
linux/bitmap.h: improve BITMAP_{LAST,FIRST}_WORD_MASK
MAINTAINERS: CREDITS: remove Stefano Brivio from B43
.mailmap: add Ricardo Ribalda
CREDITS: add Ricardo Ribalda Delgado
...
There are a lot of embedded systems that run most or all of their
functionality in init, running as root:root. For these systems,
supporting multiple users is not necessary.
This patch adds a new symbol, CONFIG_MULTIUSER, that makes support for
non-root users, non-root groups, and capabilities optional. It is enabled
under CONFIG_EXPERT menu.
When this symbol is not defined, UID and GID are zero in any possible case
and processes always have all capabilities.
The following syscalls are compiled out: setuid, setregid, setgid,
setreuid, setresuid, getresuid, setresgid, getresgid, setgroups,
getgroups, setfsuid, setfsgid, capget, capset.
Also, groups.c is compiled out completely.
In kernel/capability.c, capable function was moved in order to avoid
adding two ifdef blocks.
This change saves about 25 KB on a defconfig build. The most minimal
kernels have total text sizes in the high hundreds of kB rather than
low MB. (The 25k goes down a bit with allnoconfig, but not that much.
The kernel was booted in Qemu. All the common functionalities work.
Adding users/groups is not possible, failing with -ENOSYS.
Bloat-o-meter output:
add/remove: 7/87 grow/shrink: 19/397 up/down: 1675/-26325 (-24650)
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Iulia Manda <iulia.manda21@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current prototypes for these operations are somewhat awkward as they
deal with fl_owners but take struct file_lock arguments. In the future,
we'll want to be able to take references without necessarily dealing
with a struct file_lock.
Change them to take fl_owner_t arguments instead and have the callers
deal with assigning the values to the file_lock structs.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
NFS4_MAXLABELLEN has defined for sec label max length, use it directly.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We've been refusing ACLs that DENY permissions that we can't effectively
deny. (For example, we can't deny permission to read attributes.)
Andreas points out that any DENY of Window's "read", "write", or
"modify" permissions would trigger this. That would be annoying.
So maybe we should be a little less paranoid, and ignore entirely the
permissions that are meaningless to us.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
NFSD_FAULT_INJECTION depends on DEBUG_FS, otherwise the debugfs_create_*
interface may return unexpected error -ENODEV, and cause system crash.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
status is always reset after this (and it doesn't make much sense there
anyway).
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
ALLOCATE/DEALLOCATE only reply one status value to client,
so, using nfsd4_only_status_rsize for reply size calculating.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Turns out sending out layouts to any client is a bad idea if they
can't get at the storage device, so require explicit admin action
to enable pNFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
With return layout as, (seg is return layout, lo is record layout)
seg->offset <= lo->offset and layout_end(seg) < layout_end(lo),
nfsd should update lo's offset to seg's end,
and,
seg->offset > lo->offset and layout_end(seg) >= layout_end(lo),
nfsd should update lo's end to seg's offset.
Fixes: 9cf514ccfa ("nfsd: implement pNFS operations")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When testing pnfs with nfsd_debug on, nfsd print a negative number
of layout length and foff in nfsd4_block_proc_layoutget as,
"GET: -xxxx:-xxx 2"
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
alloc_init_lock_stateowner can return an already freed entry if there is
a race to put openowners in the hashtable.
Noticed by inspection after Jeff Layton fixed the same bug for open
owners. Depending on client behavior, this one may be trickier to
trigger in practice.
Fixes: c58c6610ec "nfsd: Protect adding/removing lock owners using client_lock"
Cc: <stable@vger.kernel.org>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Acked-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
alloc_init_open_stateowner can return an already freed entry if there is
a race to put openowners in the hashtable.
In commit 7ffb588086, we changed it so that we allocate and initialize
an openowner, and then check to see if a matching one got stuffed into
the hashtable in the meantime. If it did, then we free the one we just
allocated and take a reference on the one already there. There is a bug
here though. The code will then return the pointer to the one that was
allocated (and has now been freed).
This wasn't evident before as this race almost never occurred. The Linux
kernel client used to serialize requests for a single openowner. That
has changed now with v4.0 kernels, and this race can now easily occur.
Fixes: 7ffb588086
Cc: <stable@vger.kernel.org> # v3.17+
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix commit 9cf514ccfa (nfsd: implement pNFS operations).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Return status after nfsd4_decode_stateid failed.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
According to RFC5661:
" When lr_returntype is LAYOUTRETURN4_FSID, the current filehandle is used
to identify the file system and all layouts matching the client ID,
the fsid of the file system, lora_layout_type, and lora_iomode are
returned. When lr_returntype is LAYOUTRETURN4_ALL, all layouts
matching the client ID, lora_layout_type, and lora_iomode are
returned and the current filehandle is not used. "
When returning client layouts, always check layout type.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
31ef83dc05 "nfsd: add trace events" had a typo that dropped a trace
event and replaced it by an incorrect recursive call to
nfsd4_cb_layout_fail. 133d558216 "Subject: nfsd: don't recursively
call nfsd4_cb_layout_fail" fixed the crash, this restores the
tracepoint.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd fixes from Bruce Fields:
"Three miscellaneous bugfixes, most importantly the clp->cl_revoked
bug, which we've seen several reports of people hitting"
* 'for-4.0' of git://linux-nfs.org/~bfields/linux:
sunrpc: integer underflow in rsc_parse()
nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd
svcrpc: fix memory leak in gssp_accept_sec_context_upcall
commit 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is
protected by clp->cl_lock") removed the use of the reaplist to
clean out clp->cl_revoked. It failed to change list_entry() to
walk clp->cl_revoked.next instead of reaplist.next
Fixes: 2d4a532d38 ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock")
Cc: stable@vger.kernel.org
Reported-by: Eric Meddaugh <etmsys@rit.edu>
Tested-by: Eric Meddaugh <etmsys@rit.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Includes of pnfs.h in export.c and fcntl.c also bring in xdr4.h, which
won't build without CONFIG_NFSD_V3, breaking non-V3 builds. Ifdef-out
most of pnfs.h in that case.
Reported-by: Bas Peters <baspeters93@gmail.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 9cf514ccfa "nfsd: implement pNFS operations"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're supposed to be testing that the fh_fsid's match but because the
parenthesis are in the wrong place, then we only check the first
byte.
Fixes: 9558f2500a ('nfsd: add fh_fsid_match helper')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The code seems to work. The protocol looks stable. The kernel's
version defaults can be overridden by rpc.nfsd arguments.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a small shim between core nfsd and filesystems to translate the
somewhat cumbersome pNFS data structures and semantics to something
more palatable for Linux filesystems.
Thanks to Rick McNeal for the old prototype pNFS blocklayout server
code, which gave a lot of inspiration to this version even if no
code is left from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
For now just a few simple events to trace the layout stateid lifetime, but
these already were enough to find several bugs in the Linux client layout
stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support to issue layout recalls to clients. For now we only support
full-file recalls to get a simple and stable implementation. This allows
to embedd a nfsd4_callback structure in the layout_state and thus avoid
any memory allocations under spinlocks during a recall. For normal
use cases that do not intent to share a single file between multiple
clients this implementation is fully sufficient.
To ensure layouts are recalled on local filesystem access each layout
state registers a new FL_LAYOUT lease with the kernel file locking code,
which filesystems that support pNFS exports that require recalls need
to break on conflicting access patterns.
The XDR code is based on the old pNFS server implementation by
Andy Adamson, Benny Halevy, Boaz Harrosh, Dean Hildebrand, Fred Isaman,
Marc Eshel, Mike Sager and Ricardo Labiaga.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for the GETDEVICEINFO, LAYOUTGET, LAYOUTCOMMIT and
LAYOUTRETURN NFSv4.1 operations, as well as backing code to manage
outstanding layouts and devices.
Layout management is very straight forward, with a nfs4_layout_stateid
structure that extends nfs4_stid to manage layout stateids as the
top-level structure. It is linked into the nfs4_file and nfs4_client
structures like the other stateids, and contains a linked list of
layouts that hang of the stateid. The actual layout operations are
implemented in layout drivers that are not part of this commit, but
will be added later.
The worst part of this commit is the management of the pNFS device IDs,
which suffers from a specification that is not sanely implementable due
to the fact that the device-IDs are global and not bound to an export,
and have a small enough size so that we can't store the fsid portion of
a file handle, and must never be reused. As we still do need perform all
export authentication and validation checks on a device ID passed to
GETDEVICEINFO we are caught between a rock and a hard place. To work
around this issue we add a new hash that maps from a 64-bit integer to a
fsid so that we can look up the export to authenticate against it,
a 32-bit integer as a generation that we can bump when changing the device,
and a currently unused 32-bit integer that could be used in the future
to handle more than a single device per export. Entries in this hash
table are never deleted as we can't reuse the ids anyway, and would have
a severe lifetime problem anyway as Linux export structures are temporary
structures that can go away under load.
Parts of the XDR data, structures and marshaling/unmarshaling code, as
well as many concepts are derived from the old pNFS server implementation
from Andy Adamson, Benny Halevy, Dean Hildebrand, Marc Eshel, Fred Isaman,
Mike Sager, Ricardo Labiaga and many others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
The pnfs code will need it too. Also remove the nfsd_ prefix to match the
other filehandle helpers in that file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Just like for other lock types we should allow different owners to have
a read lease on a file. Currently this can't happen, but with the addition
of pNFS layout leases we'll need this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Someone with a weird time_t happened to notice this, it shouldn't really
manifest till 2038. It may not be our ownly year-2038 problem.
Reported-by: Aaron Pace <Aaron.Pace@alcatel-lucent.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we use standard list_heads for tracking leases, we can have
lm_change take a pointer to the lease to be modified instead of a
double pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
We can now add a dedicated spinlock without expanding struct inode.
Change to using that to protect the various i_flctx lists.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Remove the function renew_client() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RFC 3530 14.2.24 says
This value represents the length of the names of the directory
entries and the cookie value for these entries. This length
represents the XDR encoding of the data (names and cookies)...
The "xdr encoding" of the name should probably include the 4 bytes for
the length.
But this is all just a hint so not worth e.g. backporting to stable.
Also reshuffle some lines to more clearly group together the
dircount-related code.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fi_delegees is always handled under the fi_lock, so there's no need to
use an atomic_t for this field.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, nfs4_set_delegation takes a reference to an existing
delegation and then checks to see if there is a conflict. If there is
one, then it doesn't release that reference.
Change the code to take the reference after the check and only if there
is no conflict.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"A comparatively quieter cycle for nfsd this time, but still with two
larger changes:
- RPC server scalability improvements from Jeff Layton (using RCU
instead of a spinlock to find idle threads).
- server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
Schumaker, enabling fallocate on new clients"
* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
nfsd4: fix xdr4 count of server in fs_location4
nfsd4: fix xdr4 inclusion of escaped char
sunrpc/cache: convert to use string_escape_str()
sunrpc: only call test_bit once in svc_xprt_received
fs: nfsd: Fix signedness bug in compare_blob
sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
sunrpc: convert to lockless lookup of queued server threads
sunrpc: fix potential races in pool_stats collection
sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
sunrpc: require svc_create callers to pass in meaningful shutdown routine
sunrpc: have svc_wake_up only deal with pool 0
sunrpc: convert sp_task_pending flag to use atomic bitops
sunrpc: move rq_cachetype field to better optimize space
sunrpc: move rq_splice_ok flag into rq_flags
sunrpc: move rq_dropme flag into rq_flags
sunrpc: move rq_usedeferral flag to rq_flags
sunrpc: move rq_local field to rq_flags
sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
nfsd: minor off by one checks in __write_versions()
sunrpc: release svc_pool_map reference when serv allocation fails
...
Pull networking updates from David Miller:
1) New offloading infrastructure and example 'rocker' driver for
offloading of switching and routing to hardware.
This work was done by a large group of dedicated individuals, not
limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu
2) Start making the networking operate on IOV iterators instead of
modifying iov objects in-situ during transfers. Thanks to Al Viro
and Herbert Xu.
3) A set of new netlink interfaces for the TIPC stack, from Richard
Alpe.
4) Remove unnecessary looping during ipv6 routing lookups, from Martin
KaFai Lau.
5) Add PAUSE frame generation support to gianfar driver, from Matei
Pavaluca.
6) Allow for larger reordering levels in TCP, which are easily
achievable in the real world right now, from Eric Dumazet.
7) Add a variable of napi_schedule that doesn't need to disable cpu
interrupts, from Eric Dumazet.
8) Use a doubly linked list to optimize neigh_parms_release(), from
Nicolas Dichtel.
9) Various enhancements to the kernel BPF verifier, and allow eBPF
programs to actually be attached to sockets. From Alexei
Starovoitov.
10) Support TSO/LSO in sunvnet driver, from David L Stevens.
11) Allow controlling ECN usage via routing metrics, from Florian
Westphal.
12) Remote checksum offload, from Tom Herbert.
13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
driver, from Thomas Lendacky.
14) Add MPLS support to openvswitch, from Simon Horman.
15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
Klassert.
16) Do gro flushes on a per-device basis using a timer, from Eric
Dumazet. This tries to resolve the conflicting goals between the
desired handling of bulk vs. RPC-like traffic.
17) Allow userspace to ask for the CPU upon what a packet was
received/steered, via SO_INCOMING_CPU. From Eric Dumazet.
18) Limit GSO packets to half the current congestion window, from Eric
Dumazet.
19) Add a generic helper so that all drivers set their RSS keys in a
consistent way, from Eric Dumazet.
20) Add xmit_more support to enic driver, from Govindarajulu
Varadarajan.
21) Add VLAN packet scheduler action, from Jiri Pirko.
22) Support configurable RSS hash functions via ethtool, from Eyal
Perry.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
Fix race condition between vxlan_sock_add and vxlan_sock_release
net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
net/mlx4: Add support for A0 steering
net/mlx4: Refactor QUERY_PORT
net/mlx4_core: Add explicit error message when rule doesn't meet configuration
net/mlx4: Add A0 hybrid steering
net/mlx4: Add mlx4_bitmap zone allocator
net/mlx4: Add a check if there are too many reserved QPs
net/mlx4: Change QP allocation scheme
net/mlx4_core: Use tasklet for user-space CQ completion events
net/mlx4_core: Mask out host side virtualization features for guests
net/mlx4_en: Set csum level for encapsulated packets
be2net: Export tunnel offloads only when a VxLAN tunnel is created
gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
net: fec: only enable mdio interrupt before phy device link up
net: fec: clear all interrupt events to support i.MX6SX
net: fec: reset fep link status in suspend function
net: sock: fix access via invalid file descriptor
net: introduce helper macro for_each_cmsghdr
...
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
This patch effectively reverts commit 500f808726 ("net: ovs: use CRC32
accelerated flow hash if available"), and other remaining arch_fast_hash()
users such as from nfsd via commit 6282cd5655 ("NFSD: Don't hand out
delegations for 30 seconds after recalling them.") where it has been used
as a hash function for bloom filtering.
While we think that these users are actually not much of concern, it has
been requested to remove the arch_fast_hash() library bits that arose
from [1] entirely as per recent discussion [2]. The main argument is that
using it as a hash may introduce bias due to its linearity (see avalanche
criterion) and thus makes it less clear (though we tried to document that)
when this security/performance trade-off is actually acceptable for a
general purpose library function.
Lets therefore avoid any further confusion on this matter and remove it to
prevent any future accidental misuse of it. For the time being, this is
going to make hashing of flow keys a bit more expensive in the ovs case,
but future work could reevaluate a different hashing discipline.
[1] https://patchwork.ozlabs.org/patch/299369/
[2] https://patchwork.ozlabs.org/patch/418756/
Cc: Neil Brown <neilb@suse.de>
Cc: Francesco Fusco <fusco@ntop.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a bug where nfsd4_encode_components_esc() incorrectly calculates the
length of server array in fs_location4--note that it is a count of the
number of array elements, not a length in bytes.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 082d4bd72a (nfsd4: "backfill" using write_bytes_to_xdr_buf)
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix a bug where nfsd4_encode_components_esc() includes the esc_end char as
an additional string encoding.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e7a0444aef "nfsd: add IPv6 addr escaping to fs_location hosts"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bugs similar to the one in acbbe6fbb2 (kcmp: fix standard comparison
bug) are in rich supply.
In this variant, the problem is that struct xdr_netobj::len has type
unsigned int, so the expression o1->len - o2->len _also_ has type
unsigned int; it has completely well-defined semantics, and the result
is some non-negative integer, which is always representable in a long
long. But this means that if the conditional triggers, we are
guaranteed to return a positive value from compare_blob.
In this case it could be fixed by
- res = o1->len - o2->len;
+ res = (long long)o1->len - (long long)o2->len;
but I'd rather eliminate the usually broken 'return a - b;' idiom.
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
My static checker complains that if "len == remaining" then it means we
have truncated the last character off the version string.
The intent of the code is that we print as many versions as we can
without truncating a version. Then we put a newline at the end. If the
newline can't fit we return -EINVAL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The currect code for nfsd41_cb_get_slot() and nfsd4_cb_done() has no
locking in order to guarantee atomicity, and so allows for races of
the form.
Task 1 Task 2
====== ======
if (test_and_set_bit(0) != 0) {
clear_bit(0)
rpc_wake_up_next(queue)
rpc_sleep_on(queue)
return false;
}
This patch breaks the race condition by adding a retest of the bit
after the call to rpc_sleep_on().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Even when security labels are disabled we support at least the same
attributes as v4.1.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The global state_lock protects the file_hashtbl, and that has the
potential to be a scalability bottleneck.
Address this by making the file_hashtbl use RCU. Add a rcu_head to the
nfs4_file and use that when freeing ones that have been hashed. In order
to conserve space, we union the fi_rcu field with the fi_delegations
list_head which must be clear by the time the last reference to the file
is dropped.
Convert find_file_locked to use RCU lookup primitives and not to require
that the state_lock be held, and convert find_file to do a lockless
lookup. Convert find_or_add_file to attempt a lockless lookup first, and
then fall back to doing a locked search and insert if that fails to find
anything.
Also, minimize the number of times we need to calculate the hash value
by passing it in as an argument to the search and insert functions, and
optimize the order of arguments in nfsd4_init_file.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
DEALLOCATE only returns a status value, meaning we can use the noop()
xdr encoder to reply to the client.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
J. Bruce Fields