Later we would like to clear PageWriteback bit only after extent
conversion from unwritten to written extents is performed. However it
is not possible to start a transaction after PageWriteback is set
because that violates lock ordering (and is easy to deadlock). So we
have to reserve a transaction before locking pages and sending them
for IO and later we use the transaction for extent conversion from
ext4_end_io().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There isn't any need for setting BH_Uninit on buffers anymore. It was
only used to signal we need to mark io_end as needing extent
conversion in add_bh_to_extent() but now we can mark the io_end
directly when mapping extent.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are two issues with current writeback path in ext4. For one we
don't necessarily map complete pages when blocksize < pagesize and
thus needn't do any writeback in one iteration. We always map some
blocks though so we will eventually finish mapping the page. Just if
writeback races with other operations on the file, forward progress is
not really guaranteed. The second problem is that current code
structure makes it hard to associate all the bios to some range of
pages with one io_end structure so that unwritten extents can be
converted after all the bios are finished. This will be especially
difficult later when io_end will be associated with reserved
transaction handle.
We restructure the writeback path to a relatively simple loop which
first prepares extent of pages, then maps one or more extents so that
no page is partially mapped, and once page is fully mapped it is
submitted for IO. We keep all the mapping and IO submission
information in mpage_da_data structure to somewhat reduce stack usage.
Resulting code is somewhat shorter than the old one and hopefully also
easier to read.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We limit the number of blocks written in a single loop of
ext4_da_writepages() to 64 when inode uses indirect blocks. That is
unnecessary as credit estimates for mapping logically continguous run
of blocks is rather low even for inode with indirect blocks. So just
lift this limitation and properly calculate the number of necessary
credits.
This better credit estimate will also later allow us to always write
at least a single page in one iteration.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_ind_trans_blocks() wrongly used 'chunk' argument to decide whether
blocks mapped are logically contiguous. That is wrong since the argument
informs whether the blocks are physically contiguous. As the blocks
mapped are always logically contiguous and that's all
ext4_ind_trans_blocks() cares about, just remove the 'chunk' argument.
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This attribute is now unused so deprecate it. We still show the old
default value to keep some compatibility but we don't allow writing to
that attribute anymore.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Writeback code got better in how it submits IO and now the number of
pages requested to be written is usually higher than original 1024.
The number is now dynamically computed based on observed throughput
and is set to be about 0.5 s worth of writeback. E.g. on ordinary
SATA drive this ends up somewhere around 10000 as my testing shows.
So remove the unnecessary smarts from ext4_da_writepages().
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In some cases we cannot start a transaction because of locking
constraints and passing started transaction into those places is not
handy either because we could block transaction commit for too long.
Transaction reservation is designed to solve these issues. It
reserves a handle with given number of credits in the journal and the
handle can be later attached to the running transaction without
blocking on commit or checkpointing. Reserved handles do not block
transaction commit in any way, they only reduce maximum size of the
running transaction (because we have to always be prepared to
accomodate request for attaching reserved handle).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Bugs in ENOMEM handling found by Linux File System Verification project
(linuxtesting.org) and fixed by Alexey Khoroshilov
<khoroshilov@ispras.ru>.
CC: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The arithmetics adding delalloc blocks to the number of used blocks in
ext4_getattr() can easily overflow on 32-bit archs as we first multiply
number of blocks by blocksize and then divide back by 512. Make the
arithmetics more clever and also use proper type (unsigned long long
instead of unsigned long).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On 32-bit architectures with 32-bit sector_t computation of data offset
in ext4_xattr_fiemap() can overflow resulting in reporting bogus data
location. Fix the problem by typing block number to proper type before
shifting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_lblk_t is just u32 so multiplying it by blocksize can easily
overflow for files larger than 4 GB. Fix that by properly typing the
block offsets before shifting.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
On 32-bit archs when sector_t is defined as 32-bit the logic computing
data offset in ext4_inline_data_fiemap(). Fix that by properly typing
the shifted value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Suppress the messages releating to processing the ext4 orphan list
("truncating inode" and "deleting unreferenced inode") unless the
debug option is on, since otherwise they end up taking up space in the
log that could be used for more useful information.
Tested by opening several files, unlinking them, then
crashing the system, rebooting the system and examining
/var/log/messages.
Addresses the problem described in http://crbug.com/220976
Signed-off-by: Paul Taysom <taysom@chromium.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.
This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.
With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.
This scenario can be described in simple diagram:
|FFF...FF..FF.UUU|
^----------^
punch hole
. - free space
| - cluster boundary
F - freed extent
U - used extent
Also update respective tracepoints to use signed long long type for
partial_cluster.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The "head removal" branch in the condition is never used in any code
path in ext4 since the function only caller ext4_ext_rm_leaf() will make
sure that the extent is properly split before removing blocks. Note that
there is a bug in this branch anyway.
This commit removes the unused code completely and makes use of
ext4_error() instead of printk if dubious range is provided.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The discard_partial_page_buffers is no longer used anywhere so we can
simply remove it including the *_no_lock variant and
EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED define.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We're doing to get rid of ext4_discard_partial_page_buffers() since it is
duplicating some code and also partially duplicating work of
truncate_pagecache_range(), moreover the old implementation was much
clearer.
Now when the truncate_inode_pages_range() can handle truncating non page
aligned regions we can use this to invalidate and zero out block aligned
region of the punched out range and then use ext4_block_truncate_page()
to zero the unaligned blocks on the start and end of the range. This
will greatly simplify the punch hole code. Moreover after this commit we
can get rid of the ext4_discard_partial_page_buffers() completely.
We also introduce function ext4_prepare_punch_hole() to do come common
operations before we attempt to do the actual punch hole on
indirect or extent file which saves us some code duplication.
This has been tested on ppc64 with 1k block size with fsx and xfstests
without any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we do not tell mm to zero out tail of the page before truncate
in orphan_cleanup(). This is ok, because the page should not be
uptodate, however this may eventually change and I might cause problems.
Call truncate_inode_pages() as precautionary measure. Thanks Jan Kara
for pointing this out.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit 189e868fa8.
This commit reintroduces the use of ext4_block_truncate_page() in ext4
truncate operation instead of ext4_discard_partial_page_buffers().
The statement in the commit description that the truncate operation only
zero block unaligned portion of the last page is not exactly right,
since truncate_pagecache_range() also zeroes and invalidate the unaligned
portion of the page. Then there is no need to zero and unmap it once more
and ext4_block_truncate_page() was doing the right job, although we
still need to update the buffer head containing the last block, which is
exactly what ext4_block_truncate_page() is doing.
Moreover the problem described in the commit is fixed more properly with
commit
15291164b2
jbd2: clear BH_Delay & BH_Unwritten in journal_unmap_buffer
This was tested on ppc64 machine with block size of 1024 bytes without
any problems.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In data=ordered mode we should call ext4_jbd2_file_inode() so that crash
after the truncate transaction has committed does not expose stall data
in the tail of the block.
Thanks Jan Kara for pointing that out.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This reverts commit ccb4d7af91.
This commit reintroduces functions ext4_block_truncate_page() and
ext4_block_zero_page_range() which has been previously removed in favour
of ext4_discard_partial_page_buffers().
In future commits we want to reintroduce those function and remove
ext4_discard_partial_page_buffers() since it is duplicating some code
and also partially duplicating work of truncate_pagecache_range(),
moreover the old implementation was much clearer.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
->invalidatepage() aop now accepts range to invalidate so we can make
use of it in all ext4 invalidatepage routines.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
invalidatepage now accepts range to invalidate and there are two file
system using jbd2 also implementing punch hole feature which can benefit
from this. We need to implement the same thing for jbd2 layer in order to
allow those file system take benefit of this functionality.
This commit adds length argument to the jbd2_journal_invalidatepage()
and updates all instances in ext4 and ocfs2.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
regression) introduced during the 3.10-rc1 merge window. Also
included is a bug fix relating to allocating blocks after resizing an
ext3 file system when using the ext4 file system driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABCAAGBQJRkZBlAAoJENNvdpvBGATwLYQP/iWOBs2z93WG23cqkgqvL8o6
ZyeJdgy9dkFCArVDX5SSnGkJXZ3iqIKi5HoTKTJKfytgMzgiDAZcLsIHVv6NczwR
UGhjgS3HEdV5tJ46E6JnpB3NLSb+rAdc5kCdlsbzU46CP+JjFiYEhxVpK7ELuM/G
yctChbIH9FY+1OwxHccacBOaJU2ELhnH6B/8Ry/6gM2H0vfKeTNOdocOHdxvbNqg
ooGjytMfVopMQEfVG8aXtTfy341NFJH5fAYEahCcXxeO9ta6Unj9yOu5JV2wVrTt
39+DBsquGX6AVQsc9IxJ6YAN6ldwWN7l3huE9/AI0o/alwGsfVi5M+M/d1MMjDqf
Fgl2EzzBpZQeKKY9UXNi4LLgYdBiILMgKDOGoRKhRb8ynSSf/JX43+24FvidEi3o
o//J4aR+oSZfaovGAeikqyF1cumayhoNN8MINRN8igIinBiC4GjBFEl/Kl/1eAY/
lREGcsmYPXOkVPpM72waRYlP4GwNdOg4QSEY0SGljpwluO+dYtKQjHXcv/s/xL5v
j3GemzYVyjx4zaq1g3PxGfuD6VKFHr0T6jvzd6cHu17lnPlw9fwznHbEm9BEcXDY
gbGx9u+a2ZTqDwYVALbeoRpf9Zz6DUCse3ts4N3rbkXUQQiBYo7tybfVopIMAukb
CexvidDE/ryJrJJFBwoK
=6cRD
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Fixed regressions (two stability regressions and a performance
regression) introduced during the 3.10-rc1 merge window.
Also included is a bug fix relating to allocating blocks after
resizing an ext3 file system when using the ext4 file system driver"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd,jbd2: fix oops in jbd2_journal_put_journal_head()
ext4: revert "ext4: use io_end for multiple bios"
ext4: limit group search loop for non-extent files
ext4: fix fio regression
This reverts commit 4eec708d26.
Multiple users have reported crashes which is apparently caused by
this commit. Thanks to Dmitry Monakhov for bisecting it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Jan Kara <jack@suse.cz>
Merge more incoming from Andrew Morton:
- Various fixes which were stalled or which I picked up recently
- A large rotorooting of the AIO code. Allegedly to improve
performance but I don't really have good performance numbers (I might
have lost the email) and I can't raise Kent today. I held this out
of 3.9 and we could give it another cycle if it's all too late/scary.
I ended up taking only the first two thirds of the AIO rotorooting. I
left the percpu parts and the batch completion for later. - Linus
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (33 commits)
aio: don't include aio.h in sched.h
aio: kill ki_retry
aio: kill ki_key
aio: give shared kioctx fields their own cachelines
aio: kill struct aio_ring_info
aio: kill batch allocation
aio: change reqs_active to include unreaped completions
aio: use cancellation list lazily
aio: use flush_dcache_page()
aio: make aio_read_evt() more efficient, convert to hrtimers
wait: add wait_event_hrtimeout()
aio: refcounting cleanup
aio: make aio_put_req() lockless
aio: do fget() after aio_get_req()
aio: dprintk() -> pr_debug()
aio: move private stuff out of aio.h
aio: add kiocb_cancel()
aio: kill return value of aio_complete()
char: add aio_{read,write} to /dev/{null,zero}
aio: remove retry-based AIO
...
same story as with the previous patches - note that return
value of blkdev_close() is lost, since there's nowhere the
caller (__fput()) could return it to.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.
However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups. In this case,
the limit
if (group == ngroups)
group = 0;
at the top of the loop is never true, and the loop will
run away.
Catch this case inside the loop and reset the search to
start at group 0.
[sandeen@redhat.com: add commit msg & comments]
Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
We (Linux Kernel Performance project) found a regression introduced
by commit:
f7fec032aa ext4: track all extent status in extent status tree
The commit causes about 20% performance decrease in fio random write
test. Profiler shows that rb_next() uses a lot of CPU time. The call
stack is:
rb_next
ext4_es_find_delayed_extent
ext4_map_blocks
_ext4_get_block
ext4_get_block_write
__blockdev_direct_IO
ext4_direct_IO
generic_file_direct_write
__generic_file_aio_write
ext4_file_write
aio_rw_vect_retry
aio_run_iocb
do_io_submit
sys_io_submit
system_call_fastpath
io_submit
td_io_getevents
io_u_queued_complete
thread_main
main
__libc_start_main
The cause is that ext4_es_find_delayed_extent() doesn't have an
upper bound, it keeps searching until a delayed extent is found.
When there are a lots of non-delayed entries in the extent state
tree, ext4_es_find_delayed_extent() may uses a lot of CPU time.
Reported-by: LKP project <lkp@linux.intel.com>
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Due to a missing cast, the high 32-bits of a 64-bit block number used
when calculating the readahead block for inode tables can get lost.
This means we can end up fetching the wrong blocks for readahead for
file systems > 16TB.
Linus found this when experimenting with an enhacement to the sparse
static code checker which checks for missing widening casts before
binary "not" operators.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fox the Kconfig documentation for CONFIG_EXT4_DEBUG to match the
change made by commit a0b30c1229: ext4: use module parameters instead
of debugfs for mballoc_debug
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
Commit fb0a387dcd restricts block allocations for indirect-mapped
files to block groups less than s_blockfile_groups. However, the
online resizing code wasn't setting s_blockfile_groups, so the newly
added block groups were not available for non-extent mapped files.
Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
This allows metadata writebacks which are issued via block device
writeback to be sent with the current write request flags.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As Dave Chinner pointed out at the 2013 LSF/MM workshop, it's
important that metadata I/O requests are marked as such to avoid
priority inversions caused by I/O bandwidth throttling.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.'. And what's
worse, we may meet with duplicate dir entries as the offset
for inline dir and non-inline one is quite different.
This patch just try to resolve this problem if dir_index
is disabled. In this case, f_pos is the real offset with
the dir block, so for inline dir, we just pretend as if
we are a dir block and returns the offset like a norml
dir block does.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Zach reported a problem that if inline data is enabled, we don't
tell the difference between the offset of '.' and '..'. And a
getdents will fail if the user only want to get '.' and what's worse,
if there is a conversion happens when the user calls getdents
many times, he/she may get the same entry twice.
In theory, a dir block would also fail if it is converted to a
hashed-index based dir since f_pos will become a hash value, not the
real one, but it doesn't happen. And a deep investigation shows that
we uses a hash based solution even for a normal dir if the dir_index
feature is enabled.
So this patch just adds a new htree_inlinedir_to_tree for inline dir,
and if we find that the hash index is supported, we will do like what
we do for a dir block.
Reported-by: Zach Brown <zab@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Inode allocation transaction is pretty heavy (246 credits with quotas
and extents before previous patch, still around 200 after it). This is
mostly due to credits required for allocation of quota structures
(credits there are heavily overestimated but it's difficult to make
better estimates if we don't want to wire non-trivial assumptions about
quota format into filesystem).
So move quota initialization out of allocation transaction. That way
transaction for quota structure allocation will be started only if we
need to look up quota structure on disk (rare) and furthermore it will
be started for each quota type separately, not for all of them at once.
This reduces maximum transaction size to 34 is most cases and to 73 in
the worst case.
[ Modified by tytso to clean up the cleanup paths for error handling.
Also use a separate call to ext4_std_error() for each failure so it
is easier for someone who is debugging a problem in this function to
determine which function call failed. ]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jan Kara <jack@suse.cz>
SUSE is carrying out of tree patches for Rich ACL support for ext4 as
they didn't get upstream due to opposition of some VFS maintainers.
Reserve xattr index for Rich ACLs so that it cannot be taken by
anything else which would force users to backup and reset their Rich
ACLs on files.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently noone cleared buffer_uninit flag. This results in writeback
needlessly marking io_end as needing extent conversion scanning extent
tree for extents to convert. So clear the buffer_uninit flag once the
buffer is submitted for IO and the flag is transformed into
EXT4_IO_END_UNWRITTEN flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
Change writeback path to create just one io_end structure for the
extent to which we submit IO and share it among bios writing that
extent. This prevents needless splitting and joining of unwritten
extents when they cannot be submitted as a single bio.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
So far ext4_bio_write_page() attached all the pages to ext4_io_end
structure. This makes that structure pretty heavy (1 KB for pointers
+ 16 bytes per page attached to the bio). Also later we would like to
share ext4_io_end structure among several bios in case IO to a single
extent needs to be split among several bios and pointing to pages from
ext4_io_end makes this complex.
We remove page pointers from ext4_io_end and use pointers from bio
itself instead. This isn't as easy when blocksize < pagesize because
then we can have several bios in flight for a single page and we have
to be careful when to call end_page_writeback(). However this is a
known problem already solved by block_write_full_page() /
end_buffer_async_write() so we mimic its behavior here. We mark
buffers going to disk with BH_Async_Write flag and in
ext4_bio_end_io() we check whether there are any buffers with
BH_Async_Write flag left. If there are not, we can call
end_page_writeback().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com>
In parse_strtoul() we're still using deprecated simple_strtoul(). Remove
parse_strtoul() altogether and replace it with kstrtoul()
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Jan Kara