smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).
read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.
Fix this bug by replacing the rwlock with a mutex.
Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com
Fixes: 64e28b52c7 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These two error paths need to release_sock(sk) before returning.
Fixes: a6a6fe27ba ("net/smc: Dynamic control handshake limitation by socket options")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When smc_connect_clc() times out, it will return -EAGAIN(tcp_recvmsg
retuns -EAGAIN while timeout), then this value will passed to the
application, which is quite confusing to the applications, makes
inconsistency with TCP.
From the manual of connect, ETIMEDOUT is more suitable, and this patch
try convert EAGAIN to ETIMEDOUT in that case.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1644913490-21594-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch introduces a lock-free version of smc_tx_work() to
solve unnecessary lock contention, which is expected to be held lock.
So this adds comment to remind people to keep an eye out for locks.
Suggested-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Although we can control SMC handshake limitation through socket options,
which means that applications who need it must modify their code. It's
quite troublesome for many existing applications. This patch modifies
the global default value of SMC handshake limitation through netlink,
providing a way to put constraint on handshake without modifies any code
for applications.
Suggested-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch aims to add dynamic control for SMC handshake limitation for
every smc sockets, in production environment, it is possible for the
same applications to handle different service types, and may have
different opinion on SMC handshake limitation.
This patch try socket options to complete it, since we don't have socket
option level for SMC yet, which requires us to implement it at the same
time.
This patch does the following:
- add new socket option level: SOL_SMC.
- add new SMC socket option: SMC_LIMIT_HS.
- provide getter/setter for SMC socket options.
Link: https://lore.kernel.org/all/20f504f961e1a803f85d64229ad84260434203bd.1644323503.git.alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch intends to provide a mechanism to put constraint on SMC
connections visit according to the pressure of SMC handshake process.
At present, frequent visits will cause the incoming connections to be
backlogged in SMC handshake queue, raise the connections established
time. Which is quite unacceptable for those applications who base on
short lived connections.
There are two ways to implement this mechanism:
1. Put limitation after TCP established.
2. Put limitation before TCP established.
In the first way, we need to wait and receive CLC messages that the
client will potentially send, and then actively reply with a decline
message, in a sense, which is also a sort of SMC handshake, affect the
connections established time on its way.
In the second way, the only problem is that we need to inject SMC logic
into TCP when it is about to reply the incoming SYN, since we already do
that, it's seems not a problem anymore. And advantage is obvious, few
additional processes are required to complete the constraint.
This patch use the second way. After this patch, connections who beyond
constraint will not informed any SMC indication, and SMC will not be
involved in any of its subsequent processes.
Link: https://lore.kernel.org/all/1641301961-59331-1-git-send-email-alibuda@linux.alibaba.com/
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation does not handling backlog semantics, one
potential risk is that server will be flooded by infinite amount
connections, even if client was SMC-incapable.
This patch works to put a limit on backlog connections, referring to the
TCP implementation, we divides SMC connections into two categories:
1. Half SMC connection, which includes all TCP established while SMC not
connections.
2. Full SMC connection, which includes all SMC established connections.
For half SMC connection, since all half SMC connections starts with TCP
established, we can achieve our goal by put a limit before TCP
established. Refer to the implementation of TCP, this limits will based
on not only the half SMC connections but also the full connections,
which is also a constraint on full SMC connections.
For full SMC connections, although we know exactly where it starts, it's
quite hard to put a limit before it. The easiest way is to block wait
before receive SMC confirm CLC message, while it's under protection by
smc_server_lgr_pending, a global lock, which leads this limit to the
entire host instead of a single listen socket. Another way is to drop
the full connections, but considering the cast of SMC connections, we
prefer to keep full SMC connections.
Even so, the limits of full SMC connections still exists, see commits
about half SMC connection below.
After this patch, the limits of backend connection shows like:
For SMC:
1. Client with SMC-capability can makes 2 * backlog full SMC connections
or 1 * backlog half SMC connections and 1 * backlog full SMC
connections at most.
2. Client without SMC-capability can only makes 1 * backlog half TCP
connections and 1 * backlog full TCP connections.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In multithread and 10K connections benchmark, the backend TCP connection
established very slowly, and lots of TCP connections stay in SYN_SENT
state.
Client: smc_run wrk -c 10000 -t 4 http://server
the netstate of server host shows like:
145042 times the listen queue of a socket overflowed
145042 SYNs to LISTEN sockets dropped
One reason of this issue is that, since the smc_tcp_listen_work() shared
the same workqueue (smc_hs_wq) with smc_listen_work(), while the
smc_listen_work() do blocking wait for smc connection established. Once
the workqueue became congested, it's will block the accept() from TCP
listen.
This patch creates a independent workqueue(smc_tcp_ls_wq) for
smc_tcp_listen_work(), separate it from smc_listen_work(), which is
quite acceptable considering that smc_tcp_listen_work() runs very fast.
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback functions of clcsock will be saved and replaced during
the fallback. But if the fallback happens more than once, then the
copies of these callback functions will be overwritten incorrectly,
resulting in a loop call issue:
clcsk->sk_error_report
|- smc_fback_error_report() <------------------------------|
|- smc_fback_forward_wakeup() | (loop)
|- clcsock_callback() (incorrectly overwritten) |
|- smc->clcsk_error_report() ------------------|
So this patch fixes the issue by saving these function pointers only
once in the fallback and avoiding overwriting.
Reported-by: syzbot+4de3c0e8a263e1e499bc@syzkaller.appspotmail.com
Fixes: 341adeec9a ("net/smc: Forward wakeup to smc socket waitqueue after fallback")
Link: https://lore.kernel.org/r/0000000000006d045e05d78776f6@google.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f9222138 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503
("net/smc: Add netlink net namespace support") introduced an ABI
regression: since struct smc_diag_lgrinfo contains an object of
type "struct smc_diag_linkinfo", offset of all subsequent members
of struct smc_diag_lgrinfo was changed by that change.
As result, applications compiled with the old version
of struct smc_diag_linkinfo will receive garbage in
struct smc_diag_lgrinfo.role if the kernel implements
this new version of struct smc_diag_linkinfo.
Fix this regression by reverting the part of commit 79d39fc503 that
changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK
interface which is good enough, so there is probably no need to touch
the smc_diag ABI in the first place.
Fixes: 79d39fc503 ("net/smc: Add netlink net namespace support")
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This introduces a new corked flag, MSG_SENDPAGE_NOTLAST, which is
involved in syscall sendfile() [1], it indicates this is not the last
page. So we can cork the data until the page is not specify this flag.
It has the same effect as MSG_MORE, but existed in sendfile() only.
This patch adds a option MSG_SENDPAGE_NOTLAST for corking data, try to
cork more data before sending when using sendfile(), which acts like
TCP's behaviour. Also, this reimplements the default sendpage to inform
that it is supported to some extent.
[1] https://man7.org/linux/man-pages/man2/sendfile.2.html
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on the manual of TCP_CORK [1] and MSG_MORE [2], these two options
have the same effect. Applications can set these options and informs the
kernel to pend the data, and send them out only when the socket or
syscall does not specify this flag. In other words, there's no need to
send data out by a delayed work, which will queue a lot of work.
This removes corked delayed work with SMC_TX_CORK_DELAY (250ms), and the
applications control how/when to send them out. It improves the
performance for sendfile and throughput, and remove unnecessary race of
lock_sock(). This also unlocks the limitation of sndbuf, and try to fill
it up before sending.
[1] https://linux.die.net/man/7/tcp
[2] https://man7.org/linux/man-pages/man2/send.2.html
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the man page of TCP_CORK [1], if set, don't send out
partial frames. All queued partial frames are sent when option is
cleared again.
When applications call setsockopt to disable TCP_CORK, this call is
protected by lock_sock(), and tries to mod_delayed_work() to 0, in order
to send pending data right now. However, the delayed work smc_tx_work is
also protected by lock_sock(). There introduces lock contention for
sending data.
To fix it, send pending data directly which acts like TCP, without
lock_sock() protected in the context of setsockopt (already lock_sock()ed),
and cancel unnecessary dealyed work, which is protected by lock.
[1] https://linux.die.net/man/7/tcp
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we replace TCP with SMC and a fallback occurs, there may be
some socket waitqueue entries remaining in smc socket->wq, such
as eppoll_entries inserted by userspace applications.
After the fallback, data flows over TCP/IP and only clcsocket->wq
will be woken up. Applications can't be notified by the entries
which were inserted in smc socket->wq before fallback. So we need
a mechanism to wake up smc socket->wq at the same time if some
entries remaining in it.
The current workaround is to transfer the entries from smc socket->wq
to clcsock->wq during the fallback. But this may cause a crash
like this:
general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107
RIP: 0010:__wake_up_common+0x65/0x170
Call Trace:
<IRQ>
__wake_up_common_lock+0x7a/0xc0
sock_def_readable+0x3c/0x70
tcp_data_queue+0x4a7/0xc40
tcp_rcv_established+0x32f/0x660
? sk_filter_trim_cap+0xcb/0x2e0
tcp_v4_do_rcv+0x10b/0x260
tcp_v4_rcv+0xd2a/0xde0
ip_protocol_deliver_rcu+0x3b/0x1d0
ip_local_deliver_finish+0x54/0x60
ip_local_deliver+0x6a/0x110
? tcp_v4_early_demux+0xa2/0x140
? tcp_v4_early_demux+0x10d/0x140
ip_sublist_rcv_finish+0x49/0x60
ip_sublist_rcv+0x19d/0x230
ip_list_rcv+0x13e/0x170
__netif_receive_skb_list_core+0x1c2/0x240
netif_receive_skb_list_internal+0x1e6/0x320
napi_complete_done+0x11d/0x190
mlx5e_napi_poll+0x163/0x6b0 [mlx5_core]
__napi_poll+0x3c/0x1b0
net_rx_action+0x27c/0x300
__do_softirq+0x114/0x2d2
irq_exit_rcu+0xb4/0xe0
common_interrupt+0xba/0xe0
</IRQ>
<TASK>
The crash is caused by privately transferring waitqueue entries from
smc socket->wq to clcsock->wq. The owners of these entries, such as
epoll, have no idea that the entries have been transferred to a
different socket wait queue and still use original waitqueue spinlock
(smc socket->wq.wait.lock) to make the entries operation exclusive,
but it doesn't work. The operations to the entries, such as removing
from the waitqueue (now is clcsock->wq after fallback), may cause a
crash when clcsock waitqueue is being iterated over at the moment.
This patch tries to fix this by no longer transferring wait queue
entries privately, but introducing own implementations of clcsock's
callback functions in fallback situation. The callback functions will
forward the wakeup to smc socket->wq if clcsock->wq is actually woken
up and smc socket->wq has remaining entries.
Fixes: 2153bd1e3d ("net/smc: Transfer remaining wait queue entries during fallback")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encountered a crash in smc_setsockopt() and it is caused by
accessing smc->clcsock after clcsock was released.
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 50309 Comm: nginx Kdump: loaded Tainted: G E 5.16.0-rc4+ #53
RIP: 0010:smc_setsockopt+0x59/0x280 [smc]
Call Trace:
<TASK>
__sys_setsockopt+0xfc/0x190
__x64_sys_setsockopt+0x20/0x30
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f16ba83918e
</TASK>
This patch tries to fix it by holding clcsock_release_lock and
checking whether clcsock has already been released before access.
In case that a crash of the same reason happens in smc_getsockopt()
or smc_switch_to_fallback(), this patch also checkes smc->clcsock
in them too. And the caller of smc_switch_to_fallback() will identify
whether fallback succeeds according to the return value.
Fixes: fd57770dd1 ("net/smc: wait for pending work before clcsock release_sock")
Link: https://lore.kernel.org/lkml/5dd7ffd1-28e2-24cc-9442-1defec27375e@linux.ibm.com/T/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A hung_task is observed when removing SMC-R devices. Suppose that
a link group has two active links(lnk_A, lnk_B) associated with two
different SMC-R devices(dev_A, dev_B). When dev_A is removed, the
link group will be removed from smc_lgr_list and added into
lgr_linkdown_list. lnk_A will be cleared and smcibdev(A)->lnk_cnt
will reach to zero. However, when dev_B is removed then, the link
group can't be found in smc_lgr_list and lnk_B won't be cleared,
making smcibdev->lnk_cnt never reaches zero, which causes a hung_task.
This patch fixes this issue by restoring the implementation of
smc_smcr_terminate_all() to what it was before commit 349d43127d
("net/smc: fix kernel panic caused by race of smc_sock"). The original
implementation also satisfies the intention that make sure QP destroy
earlier than CQ destroy because we will always wait for smcibdev->lnk_cnt
reaches zero, which guarantees QP has been destroyed.
Fixes: 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The declaration of smc_wr_tx_dismiss_slots() is unused.
So remove it.
Fixes: 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encountered some crashes caused by the race between SMC-R
link access and link clear that triggered by abnormal link
group termination, such as port error.
Here is an example of this kind of crashes:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_llc_flow_initiate+0x44/0x190 [smc]
Call Trace:
<TASK>
? __smc_buf_create+0x75a/0x950 [smc]
smcr_lgr_reg_rmbs+0x2a/0xbf [smc]
smc_listen_work+0xf72/0x1230 [smc]
? process_one_work+0x25c/0x600
process_one_work+0x25c/0x600
worker_thread+0x4f/0x3a0
? process_one_work+0x600/0x600
kthread+0x15d/0x1a0
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
smc_listen_work() __smc_lgr_terminate()
---------------------------------------------------------------
| smc_lgr_free()
| |- smcr_link_clear()
| |- memset(lnk, 0)
smc_listen_rdma_reg() |
|- smcr_lgr_reg_rmbs() |
|- smc_llc_flow_initiate() |
|- access lnk->lgr (panic) |
These crashes are similarly caused by clearing SMC-R link
resources when some functions is still accessing to them.
This patch tries to fix the issue by introducing reference
count of SMC-R links and ensuring that the sensitive resources
of links won't be cleared until reference count reaches zero.
The operation to the SMC-R link reference count can be concluded
as follows:
object [hold or initialized as 1] [put]
--------------------------------------------------------------------
links smcr_link_init() smcr_link_clear()
connections smc_conn_create() smc_conn_free()
Through this way, the clear of SMC-R links is later than the
free of all the smc connections above it, thus avoiding the
unsafe reference to SMC-R links.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is no longer suitable to identify whether a smc connection
is registered in a link group through checking if conn->lgr
is NULL, because conn->lgr won't be reset even the connection
is unregistered from a link group.
So this patch introduces a new helper smc_conn_lgr_valid() and
replaces all the check of conn->lgr in original implementation
with the new helper to judge if conn->lgr is valid to use.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encountered some crashes caused by the race between the access
and the termination of link groups.
Here are some of panic stacks we met:
1) Race between smc_clc_wait_msg() and __smc_lgr_terminate()
BUG: kernel NULL pointer dereference, address: 00000000000002f0
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_wait_msg+0x3eb/0x5c0 [smc]
Call Trace:
<TASK>
? smc_clc_send_accept+0x45/0xa0 [smc]
? smc_clc_send_accept+0x45/0xa0 [smc]
smc_listen_work+0x783/0x1220 [smc]
? finish_task_switch+0xc4/0x2e0
? process_one_work+0x1ad/0x3c0
process_one_work+0x1ad/0x3c0
worker_thread+0x4c/0x390
? rescuer_thread+0x320/0x320
kthread+0x149/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
smc_listen_work() abnormal case like port error
---------------------------------------------------------------
| __smc_lgr_terminate()
| |- smc_conn_kill()
| |- smc_lgr_unregister_conn()
| |- set conn->lgr = NULL
smc_clc_wait_msg() |
|- access conn->lgr (panic) |
2) Race between smc_setsockopt() and __smc_lgr_terminate()
BUG: kernel NULL pointer dereference, address: 00000000000002e8
RIP: 0010:smc_setsockopt+0x17a/0x280 [smc]
Call Trace:
<TASK>
__sys_setsockopt+0xfc/0x190
__x64_sys_setsockopt+0x20/0x30
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
smc_setsockopt() abnormal case like port error
--------------------------------------------------------------
| __smc_lgr_terminate()
| |- smc_conn_kill()
| |- smc_lgr_unregister_conn()
| |- set conn->lgr = NULL
mod_delayed_work() |
|- access conn->lgr (panic) |
There are some other panic places and they are caused by the
similar reason as described above, which is accessing link
group after termination, thus getting a NULL pointer or invalid
resource.
Currently, there seems to be no synchronization between the
link group access and a sudden termination of it. This patch
tries to fix this by introducing reference count of link group
and not freeing link group until reference count is zero.
Link group might be referred to by links or smc connections. So
the operation to the link group reference count can be concluded
as follows:
object [hold or initialized as 1] [put]
-------------------------------------------------------------------
link group smc_lgr_create() smc_lgr_free()
connections smc_conn_create() smc_conn_free()
links smcr_link_init() smcr_link_clear()
Througth this way, we extend the life cycle of link group and
ensure it is longer than the life cycle of connections and links
above it, so that avoid invalid access to link group after its
termination.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC connections might fail to be registered in a link group due to
unable to find a usable link during its creation. As a result,
smc_conn_create() will return a failure and most resources related
to the connection won't be applied or initialized, such as
conn->abort_work or conn->lnk.
If smc_conn_free() is invoked later, it will try to access the
uninitialized resources related to the connection, thus causing
a warning or crash.
This patch tries to fix this by resetting conn->lgr to NULL if an
abnormal exit occurs in smc_lgr_register_conn(), thus avoiding the
access to uninitialized resources in smc_conn_free().
Meanwhile, the new created link group should be terminated if smc
connections can't be registered in it. So smc_lgr_cleanup_early() is
modified to take care of link group only and invoked to terminate
unusable link group by smc_conn_create(). The call to smc_conn_free()
is moved out from smc_lgr_cleanup_early() to smc_conn_abort().
Fixes: 56bc3b2094 ("net/smc: assign link to a new connection")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add comments for both smc_link_sendable() and smc_link_usable()
to help better distinguish and use them.
No function changes.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pointer link is being re-assigned the same value that it was
initialized with in the previous declaration statement. The
re-assignment is redundant and can be removed.
Fixes: 387707fdf4 ("net/smc: convert static link ID to dynamic references")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This implements TCP ULP for SMC, helps applications to replace TCP with
SMC protocol in place. And we use it to implement transparent
replacement.
This replaces original TCP sockets with SMC, reuse TCP as clcsock when
calling setsockopt with TCP_ULP option, and without any overhead.
To replace TCP sockets with SMC, there are two approaches:
- use setsockopt() syscall with TCP_ULP option, if error, it would
fallback to TCP.
- use BPF prog with types BPF_CGROUP_INET_SOCK_CREATE or others to
replace transparently. BPF hooks some points in create socket, bind
and others, users can inject their BPF logics without modifying their
applications, and choose which connections should be replaced with SMC
by calling setsockopt() in BPF prog, based on rules, such as TCP tuples,
PID, cgroup, etc...
BPF doesn't support calling setsockopt with TCP_ULP now, I will send the
patches after this accepted.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This prints net namespace ID, helps us to distinguish different net
namespaces when using tracepoints.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds net namespace ID to the kernel log, net_cookie is unique in
the whole system. It is useful in container environment.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds net namespace ID to diag of linkgroup, helps us to distinguish
different namespaces, and net_cookie is unique in the whole system.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, rdma device supports exclusive net namespace isolation,
however linkgroup doesn't know and support ibdev net namespace.
Applications in the containers don't want to share the nics if we
enabled rdma exclusive mode. Every net namespaces should have their own
linkgroups.
This patch introduce a new field net for linkgroup, which is standing
for the ibdev net namespace in the linkgroup. The net in linkgroup is
initialized with the net namespace of link's ibdev. It compares the net
of linkgroup and sock or ibdev before choose it, if no matched, create
new one in current net namespace. If rdma net namespace exclusive mode
is not enabled, it behaves as before.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using the bitmap API is less verbose than hand writing them.
It also improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes: 5f08318f61 ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes: 5f08318f61 ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_wr_tx_send_wait() the completion on index specified by
pend->idx is initialized and after smc_wr_tx_send() was called the wait
for completion starts. pend->idx is used to get the correct index for
the wait, but the pend structure could already be cleared in
smc_wr_tx_process_cqe().
Introduce pnd_idx to hold and use a local copy of the correct index.
Fixes: 09c61d24f9 ("net/smc: wait for departure of an IB message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In nginx/wrk benchmark, there's a hung problem with high probability
on case likes that: (client will last several minutes to exit)
server: smc_run nginx
client: smc_run wrk -c 10000 -t 1 http://server
Client hangs with the following backtrace:
0 [ffffa7ce8Of3bbf8] __schedule at ffffffff9f9eOd5f
1 [ffffa7ce8Of3bc88] schedule at ffffffff9f9eløe6
2 [ffffa7ce8Of3bcaO] schedule_timeout at ffffffff9f9e3f3c
3 [ffffa7ce8Of3bd2O] wait_for_common at ffffffff9f9el9de
4 [ffffa7ce8Of3bd8O] __flush_work at ffffffff9fOfeOl3
5 [ffffa7ce8øf3bdfO] smc_release at ffffffffcO697d24 [smc]
6 [ffffa7ce8Of3be2O] __sock_release at ffffffff9f8O2e2d
7 [ffffa7ce8Of3be4ø] sock_close at ffffffff9f8ø2ebl
8 [ffffa7ce8øf3be48] __fput at ffffffff9f334f93
9 [ffffa7ce8Of3be78] task_work_run at ffffffff9flOlff5
10 [ffffa7ce8Of3beaO] do_exit at ffffffff9fOe5Ol2
11 [ffffa7ce8Of3bflO] do_group_exit at ffffffff9fOe592a
12 [ffffa7ce8Of3bf38] __x64_sys_exit_group at ffffffff9fOe5994
13 [ffffa7ce8Of3bf4O] do_syscall_64 at ffffffff9f9d4373
14 [ffffa7ce8Of3bfsO] entry_SYSCALL_64_after_hwframe at ffffffff9fa0007c
This issue dues to flush_work(), which is used to wait for
smc_connect_work() to finish in smc_release(). Once lots of
smc_connect_work() was pending or all executing work dangling,
smc_release() has to block until one worker comes to free, which
is equivalent to wait another smc_connnect_work() to finish.
In order to fix this, There are two changes:
1. For those idle smc_connect_work(), cancel it from the workqueue; for
executing smc_connect_work(), waiting for it to finish. For that
purpose, replace flush_work() with cancel_work_sync().
2. Since smc_connect() hold a reference for passive closing, if
smc_connect_work() has been cancelled, release the reference.
Fixes: 24ac3a08e6 ("net/smc: rebuild nonblocking connect")
Reported-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/1639571361-101128-1-git-send-email-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, buffers are cleared when smc connections are created and
buffers are reused. This slows down the speed of establishing new
connections. In most cases, the applications want to establish
connections as quickly as possible.
This patch moves memset() from connection creation path to release and
buffer unuse path, this trades off between speed of establishing and
release.
Test environments:
- CPU Intel Xeon Platinum 8 core, mem 32 GiB, nic Mellanox CX4
- socket sndbuf / rcvbuf: 16384 / 131072 bytes
- w/o first round, 5 rounds, avg, 100 conns batch per round
- smc_buf_create() use bpftrace kprobe, introduces extra latency
Latency benchmarks for smc_buf_create():
w/o patch : 19040.0 ns
w/ patch : 1932.6 ns
ratio : 10.2% (-89.8%)
Latency benchmarks for socket create and connect:
w/o patch : 143.3 us
w/ patch : 102.2 us
ratio : 71.3% (-28.7%)
The latency of establishing connections is reduced by 28.7%.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211203113331.2818873-1-kgraul@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.
Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c978 ("net/smc: Ensure the active closing peer first closes clcsock")
Suggested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When applications call shutdown() with SHUT_RDWR in userspace,
smc_close_active() calls kernel_sock_shutdown(), and it is called
twice in smc_shutdown().
This fixes this by checking sk_state before do clcsock shutdown, and
avoids missing the application's call of smc_shutdown().
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes: 606a63c978 ("net/smc: Ensure the active closing peer first closes clcsock")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel_listen function in smc_listen will fail when all the available
ports are occupied. At this point smc->clcsock->sk->sk_data_ready has
been changed to smc_clcsock_data_ready. When we call smc_listen again,
now both smc->clcsock->sk->sk_data_ready and smc->clcsk_data_ready point
to the smc_clcsock_data_ready function.
The smc_clcsock_data_ready() function calls lsmc->clcsk_data_ready which
now points to itself resulting in an infinite loop.
This patch restores smc->clcsock->sk->sk_data_ready with the old value.
Fixes: a60a2b1e0a ("net/smc: reduce active tcp_listen workers")
Signed-off-by: Guo DaXing <guodaxing@huawei.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coverity reports a possible NULL dereferencing problem:
in smc_vlan_by_tcpsk():
6. returned_null: netdev_lower_get_next returns NULL (checked 29 out of 30 times).
7. var_assigned: Assigning: ndev = NULL return value from netdev_lower_get_next.
1623 ndev = (struct net_device *)netdev_lower_get_next(ndev, &lower);
CID 1468509 (#1 of 1): Dereference null return value (NULL_RETURNS)
8. dereference: Dereferencing a pointer that might be NULL ndev when calling is_vlan_dev.
1624 if (is_vlan_dev(ndev)) {
Remove the manual implementation and use netdev_walk_all_lower_dev() to
iterate over the lower devices. While on it remove an obsolete function
parameter comment.
Fixes: cb9d43f677 ("net/smc: determine vlan_id of stacked net_device")
Suggested-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The side that actively closed socket, it's clcsock doesn't enter
TIME_WAIT state, but the passive side does it. It should show the same
behavior as TCP sockets.
Consider this, when client actively closes the socket, the clcsock in
server enters TIME_WAIT state, which means the address is occupied and
won't be reused before TIME_WAIT dismissing. If we restarted server, the
service would be unavailable for a long time.
To solve this issue, shutdown the clcsock in [A], perform the TCP active
close progress first, before the passive closed side closing it. So that
the actively closed side enters TIME_WAIT, not the passive one.
Client | Server
close() // client actively close |
smc_release() |
smc_close_active() // PEERCLOSEWAIT1 |
smc_close_final() // abort or closed = 1|
smc_cdc_get_slot_and_msg_send() |
[A] |
|smc_cdc_msg_recv_action() // ACTIVE
| queue_work(smc_close_wq, &conn->close_work)
| smc_close_passive_work() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_passive_abort_received() // only in abort
|
|close() // server recv zero, close
| smc_release() // PROCESSABORT or APPCLOSEWAIT1
| smc_close_active()
| smc_close_abort() or smc_close_final() // CLOSED
| smc_cdc_get_slot_and_msg_send() // abort or closed = 1
smc_cdc_msg_recv_action() | smc_clcsock_release()
queue_work(smc_close_wq, &conn->close_work) | sock_release(tcp) // actively close clc, enter TIME_WAIT
smc_close_passive_work() // PEERCLOSEWAIT1 | smc_conn_free()
smc_close_passive_abort_received() // CLOSED|
smc_conn_free() |
smc_clcsock_release() |
sock_release(tcp) // passive close clc |
Link: https://www.spinics.net/lists/netdev/msg780407.html
Fixes: b38d732477 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There remains some variables to replace with local struct sock. So clean
them up all.
Fixes: 3163c5071f ("net/smc: use local struct sock variables consistently")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Possible recursive locking is detected by lockdep when SMC
falls back to TCP. The corresponding warnings are as follows:
============================================
WARNING: possible recursive locking detected
5.16.0-rc1+ #18 Tainted: G E
--------------------------------------------
wrk/1391 is trying to acquire lock:
ffff975246c8e7d8 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0x109/0x250 [smc]
but task is already holding lock:
ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ei->socket.wq.wait);
lock(&ei->socket.wq.wait);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by wrk/1391:
#0: ffff975246040130 (sk_lock-AF_SMC){+.+.}-{0:0}, at: smc_connect+0x43/0x150 [smc]
#1: ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x56/0x7b
__lock_acquire+0x951/0x11f0
lock_acquire+0x27a/0x320
? smc_switch_to_fallback+0x109/0x250 [smc]
? smc_switch_to_fallback+0xfe/0x250 [smc]
_raw_spin_lock_irq+0x3b/0x80
? smc_switch_to_fallback+0x109/0x250 [smc]
smc_switch_to_fallback+0x109/0x250 [smc]
smc_connect_fallback+0xe/0x30 [smc]
__smc_connect+0xcf/0x1090 [smc]
? mark_held_locks+0x61/0x80
? __local_bh_enable_ip+0x77/0xe0
? lockdep_hardirqs_on+0xbf/0x130
? smc_connect+0x12a/0x150 [smc]
smc_connect+0x12a/0x150 [smc]
__sys_connect+0x8a/0xc0
? syscall_enter_from_user_mode+0x20/0x70
__x64_sys_connect+0x16/0x20
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The nested locking in smc_switch_to_fallback() is considered to
possibly cause a deadlock because smc_wait->lock and clc_wait->lock
are the same type of lock. But actually it is safe so far since
there is no other place trying to obtain smc_wait->lock when
clc_wait->lock is held. So the patch replaces spin_lock() with
spin_lock_nested() to avoid false report by lockdep.
Link: https://lkml.org/lkml/2021/11/19/962
Fixes: 2153bd1e3d ("Transfer remaining wait queue entries during fallback")
Reported-by: syzbot+e979d3597f48262cb4ee@syzkaller.appspotmail.com
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is distracting really, let's make this simpler,
because many callers had to take care of this
by themselves, even if on x86 this adds more
code than really needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The link_id is supposed to be unique, but smcr_next_link_id() doesn't
skip the used link_id as expected. So the patch fixes this.
Fixes: 026c381fb4 ("net/smc: introduce link_idx for link group array")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SMC fallback is incomplete currently. There may be some
wait queue entries remaining in smc socket->wq, which should
be removed to clcsocket->wq during the fallback.
For example, in nginx/wrk benchmark, this issue causes an
all-zeros test result:
server: nginx -g 'daemon off;'
client: smc_run wrk -c 1 -t 1 -d 5 http://11.200.15.93/index.html
Running 5s test @ http://11.200.15.93/index.html
1 threads and 1 connections
Thread Stats Avg Stdev Max ± Stdev
Latency 0.00us 0.00us 0.00us -nan%
Req/Sec 0.00 0.00 0.00 -nan%
0 requests in 5.00s, 0.00B read
Requests/sec: 0.00
Transfer/sec: 0.00B
The reason for this all-zeros result is that when wrk used SMC
to replace TCP, it added an eppoll_entry into smc socket->wq
and expected to be notified if epoll events like EPOLL_IN/
EPOLL_OUT occurred on the smc socket.
However, once a fallback occurred, wrk switches to use clcsocket.
Now it is clcsocket->wq instead of smc socket->wq which will
be woken up. The eppoll_entry remaining in smc socket->wq does
not work anymore and wrk stops the test.
This patch fixes this issue by removing remaining wait queue
entries from smc socket->wq to clcsocket->wq during the fallback.
Link: https://www.spinics.net/lists/netdev/msg779769.html
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We got the following WARNING when running ab/nginx
test with RDMA link flapping (up-down-up).
The reason is when smc_sock fallback and at linkdown
happens simultaneously, we may got the following situation:
__smc_lgr_terminate()
--> smc_conn_kill()
--> smc_close_active_abort()
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
smc_sock was set to SMC_CLOSED and sock_put() been called
when terminate the link group. But later application call
close() on the socket, then we got:
__smc_release():
if (smc_sock->fallback)
smc_sock->sk_state = SMC_CLOSED
sock_put(smc_sock)
Again we set the smc_sock to CLOSED through it's already
in CLOSED state, and double put the refcnt, so the following
warning happens:
refcount_t: underflow; use-after-free.
WARNING: CPU: 5 PID: 860 at lib/refcount.c:28 refcount_warn_saturate+0x8d/0xf0
Modules linked in:
CPU: 5 PID: 860 Comm: nginx Not tainted 5.10.46+ #403
Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014
RIP: 0010:refcount_warn_saturate+0x8d/0xf0
Code: 05 5c 1e b5 01 01 e8 52 25 bc ff 0f 0b c3 80 3d 4f 1e b5 01 00 75 ad 48
RSP: 0018:ffffc90000527e50 EFLAGS: 00010286
RAX: 0000000000000026 RBX: ffff8881300df2c0 RCX: 0000000000000027
RDX: 0000000000000000 RSI: ffff88813bd58040 RDI: ffff88813bd58048
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000001
R10: ffff8881300df2c0 R11: ffffc90000527c78 R12: ffff8881300df340
R13: ffff8881300df930 R14: ffff88810b3dad80 R15: ffff8881300df4f8
FS: 00007f739de8fb80(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000a01b008 CR3: 0000000111b64003 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
smc_release+0x353/0x3f0
__sock_release+0x3d/0xb0
sock_close+0x11/0x20
__fput+0x93/0x230
task_work_run+0x65/0xa0
exit_to_user_mode_prepare+0xf9/0x100
syscall_exit_to_user_mode+0x27/0x190
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch adds check in __smc_release() to make
sure we won't do an extra sock_put() and set the
socket to CLOSED when its already in CLOSED state.
Fixes: 51f1de79ad (net/smc: replace sock_put worker by socket refcounting)
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This makes the output of smcr_link_down tracepoint easier to use and
understand without additional translating function's pointer address.
It prints the function name with offset:
<idle>-0 [000] ..s. 69.087164: smcr_link_down: lnk=00000000dab41cdc lgr=000000007d5d8e24 state=0 rc=1 dev=mlx5_0 location=smc_wr_tx_tasklet_fn+0x5ef/0x6f0 [smc]
Link: https://lore.kernel.org/netdev/11f17a34-fd35-f2ec-3f20-dd0c34e55fde@linux.ibm.com/
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC-R link down event is important to help us find links' issues, we
should track this event, especially in the single nic mode, which means
upper layer connection would be shut down. Then find out the direct
link-down reason in time, not only increased the counter, also the
location of the code who triggered this event.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduce two tracepoints for smc tx and rx msg to help us
diagnosis issues of data path. These two tracepoitns don't cover the
path of CORK or MSG_MORE in tx, just the top half of data path.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This introduces tracepoint for smc fallback to TCP, so that we can track
which connection and why it fallbacks, and map the clcsocks' pointer with
/proc/net/tcp to find more details about TCP connections. Compared with
kprobe or other dynamic tracing, tracepoints are stable and easy to use.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There should use TCPF_SYN_RECV instead of TCP_SYN_RECV.
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value of llc_testlink_time is set to the value stored in
net->ipv4.sysctl_tcp_keepalive_time when linkgroup init. The value of
sysctl_tcp_keepalive_time is already jiffies, so we don't need to
multiply by HZ, which would cause smc_link->llc_testlink_time overflow,
and test_link send flood.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With SMC-Rv2 the GID is an IP address that can be deleted from the
device. When an IB_EVENT_GID_CHANGE event is provided then iterate over
all active links and check if their GID is still defined. Otherwise
stop the affected link.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the netlink support for SMC-Rv2 related attributes that are
provided to user space.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for large v2 LLC control messages in smc_llc.c.
The new large work request buffer allows to combine control
messages into one packet that had to be spread over several
packets before.
Add handling of the new v2 LLC messages.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the work request layer define one large v2 buffer for each link group
that is used to transmit and receive large LLC control messages.
Add the completion queue handling for this buffer.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In smc_ib.c, scan for RoCE devices that support UDP encapsulation.
Find an eligible device and check that there is a route to the
remote peer.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CLC decline message changed with SMC-Rv2 and supports up to
4 additional diagnosis codes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the server side of the SMC-Rv2 processing. Process incoming
CLC messages, find eligible devices and check for a valid route to the
remote peer.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Send a CLC proposal message, and the remote side process this type of
message and determine the target GID. Check for a valid route to this
GID, and complete the connection establishment.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prepare the connection establishment with SMC-Rv2. Detect eligible
RoCE cards and indicate all supported SMC modes for the connection.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct smc_init_info grew over time, its time to save space on stack
and allocate this struct dynamically.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tools/testing/selftests/net/ioam6.sh
7b1700e009 ("selftests: net: modify IOAM tests for undef bits")
bf77b1400a ("selftests: net: Test for the IOAM encapsulation with IPv6")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8f3d65c166 ("net/smc: fix wait on already cleared link")
introduced link refcounting to avoid waits on already cleared links.
This patch extents and improves the refcounting to cover all
remaining possible cases for this kind of error situation.
Fixes: 15e1b99aad ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mptcp/protocol.c
977d293e23 ("mptcp: ensure tx skbs always have the MPTCP ext")
efe686ffce ("mptcp: ensure tx skbs always have the MPTCP ext")
same patch merged in both trees, keep net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The abort_work is scheduled when a connection was detected to be
out-of-sync after a link failure. The work calls smc_conn_kill(),
which calls smc_close_active_abort() and that might end up calling
smc_close_cancel_work().
smc_close_cancel_work() cancels any pending close_work and tx_work but
needs to release the sock_lock before and acquires the sock_lock again
afterwards. So when the sock_lock was NOT acquired before then it may
be held after the abort_work completes. Thats why the sock_lock is
acquired before the call to smc_conn_kill() in __smc_lgr_terminate(),
but this is missing in smc_conn_abort_work().
Fix that by acquiring the sock_lock first and release it after the
call to smc_conn_kill().
Fixes: b286a0651e ("net/smc: handle incoming CDC validation message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With SMC-Dv2 users can configure if the static system EID should be used
during CLC handshake, or if only user EIDs are allowed.
Add generic netlink support to enable and disable the system EID, and
to retrieve the system EID and its current enabled state.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The system EID is retrieved using an registered ISM device each time
when needed. This adds some unnecessary complexity at all places where
the system EID is needed, but no ISM device is at hand.
Simplify the code and save the system EID in a static variable in
smc_ism.c.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC-Dv2 allows users to define EIDs which allows to create separate
name spaces enabling users to cluster their SMC-Dv2 connections.
Add support for user defined EIDs and extent the generic netlink
interface so users can add, remove and dump EIDs.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a3fe3d01bd ("net/smc: introduce sg-logic for RMBs") introduced
a restriction for RMB allocations as used by SMC-R. However, SMC-D does
not use scatter-gather lists to back its DMBs, yet it was limited by
this restriction, still.
This patch exempts SMC, but limits allocations to the maximum RMB/DMB
size respectively.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SMC clients may be assigned to a different link after the initial
connection between two peers was established. In such a case,
the connection counter was not correctly set.
Update the connection counter correctly when a smc client connection
is assigned to a different smc link.
Fixes: 07d51580ff ("net/smc: Add connection counters for links")
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Tested-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There can be a race between the waiters for a tx work request buffer
and the link down processing that finally clears the link. Although
all waiters are woken up before the link is cleared there might be
waiters which did not yet get back control and are still waiting.
This results in an access to a cleared wait queue head.
Fix this by introducing atomic reference counting around the wait calls,
and wait with the link clear processing until all waiters have finished.
Move the work request layer related calls into smc_wr.c and set the
link state to INACTIVE before calling smcr_link_clear() in
smc_llc_srv_add_link().
Fixes: 15e1b99aad ("net/smc: no WR buffer wait for terminating link group")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'if (dev)' statement already move into dev_{put , hold}, so remove
redundant if statements.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a function wrapper to call the sk_error_report
callback. That will prepare to add additional handling whenever
sk_error_report is called, for example to trace socket errors.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When smc_sendmsg() is called before the SMC socket initialization has
completed, smc_tx_sendmsg() will access un-initialized fields of the
SMC socket which results in a null-pointer dereference.
Fix this by checking the socket state first in smc_tx_sendmsg().
Fixes: e0e4b8fa53 ("net/smc: Add SMC statistics support")
Reported-by: syzbot+5dda108b672b54141857@syzkaller.appspotmail.com
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These functions return negative ENODATA but the minus sign was left out
in the tests.
Fixes: f0dd7bf5e3 ("net/smc: Add netlink support for SMC fallback statistics")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the gathered SMC statistics network namespace aware, for each
namespace collect an own set of statistic information.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support to collect more detailed SMC fallback reason statistics and
provide these statistics to user space on the netlink interface.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the netlink function which collects the statistics information and
delivers it to the userspace.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to collect SMC statistics information. Per-cpu
variables are used to collect the statistic information for better
performance and for reducing concurrency pitfalls. The code that is
collecting statistic data is implemented in macros to increase code
reuse and readability.
Signed-off-by: Guvenc Gulce <guvenc@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
destroy_workqueue() already calls drain_workqueue(), which is a stronger
variant of flush_workqueue().
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fabio M. De Francesco