Commit Graph

59 Commits

Author SHA1 Message Date
Imre Deak 5c5cac6385 ARM: 6050/1: VFP: fix the SMP versions of vfp_{sync,flush}_hwstate
From: Imre Deak <imre.deak@nokia.com>

Recently the UP versions of these functions were refactored and as
a side effect it became possible to call them for the current thread.
This isn't true for the SMP versions however, so fix this up.

Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:11:30 +01:00
Catalin Marinas 325ffc3633 ARM: 5997/1: ARM: Correct the VFPv3 detection
A CPU has VFPv3 hardware if the FPSID[19:16] bits are 2 or more.
Currently Linux was only checking for 3 or more.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-28 10:40:14 +01:00
Linus Torvalds ac0f6f927d Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits)
  ARM: Eliminate decompressor -Dstatic= PIC hack
  ARM: 5958/1: ARM: U300: fix inverted clk round rate
  ARM: 5956/1: misplaced parentheses
  ARM: 5955/1: ep93xx: move timer defines into core.c and document
  ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c
  ARM: 5953/1: ep93xx: fix broken build of clock.c
  ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig
  ARM: 5949/1: NUC900 add gpio virtual memory map
  ARM: 5948/1: Enable timer0 to time4 clock support for nuc910
  ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk
  ARM: make_coherent(): fix problems with highpte, part 2
  MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself
  ARM: 5945/1: ep93xx: include correct irq.h in core.c
  ARM: 5933/1: amba-pl011: support hardware flow control
  ARM: 5930/1: Add PKMAP area description to memory.txt.
  ARM: 5929/1: Add checks to detect overlap of memory regions.
  ARM: 5928/1: Change type of VMALLOC_END to unsigned long.
  ARM: 5927/1: Make delimiters of DMA area globally visibly.
  ARM: 5926/1: Add "Virtual kernel memory..." printout.
  ARM: 5920/1: OMAP4: Enable L2 Cache
  ...

Fix up trivial conflict in arch/arm/mach-mx25/clock.c
2010-03-01 09:15:15 -08:00
Russell King ad187f9561 ARM: vfp ptrace: no point flushing hw context for PTRACE_GETVFPREGS
If we're only reading the VFP context via the ptrace call, there's
no need to invalidate the hardware context - we only need to do that
on PTRACE_SETVFPREGS.  This allows more efficient monitoring of a
traced task.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:39:53 +00:00
Russell King 54cb3dbb4a ARM: vfp: fix vfp_sync_state()
The more I look at vfp_sync_state(), the more I believe it's trying
to do its job in a really obscure way.

Essentially, last_VFP_context[] tracks who owns the state in the VFP
hardware.  If last_VFP_context[] is the context for the thread which
we're interested in, then the VFP hardware has context which is not
saved in the software state - so we need to bring the software state
up to date.

If last_VFP_context[] is for some other thread, we really don't care
what state the VFP hardware is in; it doesn't contain any information
pertinent to the thread we're trying to deal with - so don't touch
the hardware.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-15 21:39:53 +00:00
Catalin Marinas dbead40580 ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions
Commit c98929c07a removed the clearing of the FPSCR[31:28] bits from the
vfp_raise_exceptions() function and the new bits are or'ed with the old
FPSCR bits leading to unexpected results (the original commit was
referring to the cumulative bits - FPSCR[4:0]).

Reported-by: Tom Hameenanttila <tmhameen@marvell.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-01 20:05:09 +00:00
Russell King 797245f5da ARM: Convert VFP/Crunch/XscaleCP thread_release() to exit_thread()
This avoids races in the VFP code where the dead thread may have
state on another CPU.  By moving this code to exit_thread(), we
will be running as the thread, and therefore be running on the
current CPU.

This means that we can ensure that the only local state is accessed
in the thread notifiers.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-18 14:53:41 +00:00
Russell King 0d782dc430 ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
When the VFP notifier is called for flush_thread(), we may be
preemptible, meaning we might migrate to another CPU, which means
referencing the current CPU number without some form of locking is
invalid, and can cause data corruption.

For the most cases, this isn't a problem since atomic notifiers are run
under rcu lock, which for most configurations results in preemption
being disabled - except when the preemptable tree-based rcu
implementation is selected.

Let's make it safe anyway.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-13 16:33:19 +00:00
Catalin Marinas 07f33a035d Thumb-2: Implement the unified VFP support
This patch modifies the VFP files for the ARM/Thumb-2 unified
assembly syntax.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:57 +01:00
Catalin Marinas 88987ef91b Thumb-2: Add some .align statements to the .S files
Since the Thumb-2 instructions can be 16-bit wide, data in the .text
sections may not be aligned to a 32-bit word and this leads to unaligned
exceptions. This patch does not affect the ARM code generation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 12:32:52 +01:00
Catalin Marinas 85d6943af5 Fix the VFP handling on the Feroceon CPU
This CPU generates synchronous VFP exceptions in a non-standard way -
the FPEXC.EX bit set but without the FPSCR.IXE bit being set like in the
VFP subarchitecture 1 or just the FPEXC.DEX bit like in VFP
subarchitecture 2. The main problem is that the faulty instruction
(which needs to be emulated in software) will be restarted several times
(normally until a context switch disables the VFP). This patch ensures
that the VFP exception is treated as synchronous.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Nicolas Pitre <nico@cam.org>
2009-05-30 14:00:18 +01:00
George G. Davis f2255be812 [ARM] 5440/1: Fix VFP state corruption due to preemption during VFP exceptions
We've observed that ARM VFP state can be corrupted during VFP exception
handling when PREEMPT is enabled.  The exact conditions are difficult
to reproduce but appear to occur during VFP exception handling when a
task causes a VFP exception which is handled via VFP_bounce and is then
preempted by yet another task which in turn causes yet another VFP
exception.  Since the VFP_bounce code is not preempt safe, VFP state then
becomes corrupt.  In order to prevent preemption from occuring while
handling a VFP exception, this patch disables preemption while handling
VFP exceptions.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-01 22:17:50 +01:00
Catalin Marinas 7279dc3e91 [ARM] 5388/1: Add hwcap bits for VFPv3 and VFPv3D16
The VFPv3D16 is a VFPv3 CPU configuration where only 16 double registers
are present, as the VFPv2 configuration. This patch adds the
corresponding hwcap bits so that applications or debuggers have more
information about the supported features.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 10:59:44 +00:00
Catalin Marinas 3d1228ead6 [ARM] 5387/1: Add ptrace VFP support on ARM
This patch adds ptrace support for setting and getting the VFP registers
using PTRACE_SETVFPREGS and PTRACE_GETVFPREGS. The user_vfp structure
defined in asm/user.h contains 32 double registers (to cover VFPv3 and
Neon hardware) and the FPSCR register.

Cc: Paul Brook <paul@codesourcery.com>
Cc: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 10:59:43 +00:00
Ben Dooks fc0b7a2036 [ARM] 5349/1: VFP: Add PM code to save and restore current VFP state
When CONFIG_PM is selected, the VFP code does not have any handler
installed to deal with either saving the VFP state of the current
task, nor does it do anything to try and restore the VFP after a
resume.

On resume, the VFP will have been reset and the co-processor access
control registers are in an indeterminate state (very probably the
CP10 and CP11 the VFP uses will have been disabled by the ARM core
reset). When this happens, resume will break as soon as it tries to
unfreeze the tasks and restart scheduling.

Add a sys device to allow us to hook the suspend call to save the
current thread state if the thread is using VFP and a resume hook
which restores the CP10/CP11 access and ensures the VFP is disabled
so that the lazy swapping will take place on next access.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-18 21:21:34 +00:00
Catalin Marinas 24b647a042 ARMv7: Branch over conditional undefined instructions in vfphw.S
On ARMv7, conditional undefined instructions may generate exceptions
even if the condition is not met. The vfphw.S contains the FPINST and
FPINST2 access instructions which may not be present on processors with
synchronous VFP exceptions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:08 +00:00
Catalin Marinas 2bedbdf414 Add HWCAP_NEON to the ARM hwcap.h file
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2008-11-06 13:23:07 +00:00
Catalin Marinas 93ed397011 [ARM] 5227/1: Add the ENDPROC declarations to the .S files
This declaration specifies the "function" type and size for various
assembly functions, mainly needed for generating the correct branch
instructions in Thumb-2.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-01 12:06:34 +01:00
Jens Axboe 8691e5a8f6 smp_call_function: get rid of the unused nonatomic/retry argument
It's never used and the comments refer to nonatomic and retry
interchangably. So get rid of it.

Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 11:24:35 +02:00
Catalin Marinas 25ebee020b [ARM] 4583/1: ARMv7: Add VFPv3 support
This patch adds the support for VFPv3 (the kernel currently supports
VFPv2). The main difference is 32 double registers (compared to 16).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 14:41:28 +00:00
Catalin Marinas c98929c07a [ARM] 4582/2: Add support for the common VFP subarchitecture
This patch allows the VFP support code to run correctly on CPUs
compatible with the common VFP subarchitecture specification (Appendix
B in the ARM ARM v7-A and v7-R edition). It implements support for VFP
subarchitecture 2 while being backwards compatible with
subarchitecture 1.

On VFP subarchitecture 1, the arithmetic exceptions are asynchronous
(or imprecise as described in the old ARM ARM) unless the FPSCR.IXE
bit is 1. The exceptional instructions can be read from FPINST and
FPINST2 registers. With VFP subarchitecture 2, the arithmetic
exceptions can also be synchronous and marked by the FPEXC.DEX bit
(the FPEXC.EX bit is cleared). CPUs implementing the synchronous
arithmetic exceptions don't have the FPINST and FPINST2 registers and
accessing them would trigger and undefined exception.

Note that FPEXC.EX bit has an additional meaning on subarchitecture 1
- if it isn't set, there is no additional information in FPINST and
FPINST2 that needs to be saved at context switch or when lazy-loading
the VFP state of a different thread.

The patch also removes the clearing of the cumulative exception flags in
FPSCR when additional exceptions were raised. It is up to the user
application to clear these bits.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 14:41:28 +00:00
Russell King 90e6b04836 [ARM] vfp: fix fuitod/fsitod instructions
These two instructions exceptionally take a single precision register
as their operand.  This means we can't use vfp_get_dm() to read the
register number - we need to use vfp_get_sm() instead.  Add a flag to
indicate this exception to the general rule.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-10 17:07:08 +00:00
Takashi Ohmasa b9a5ce3cae [ARM] 4630/1: Fix the vector stride of the double vector instruction.
The vector stride of the double-precision vector instructions must be changed
to 1-2 from even 2-4, because the double registers numbering has been
changed to 0-15 from even 0-30 by
1356c1948d commit.

Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-20 23:42:22 +01:00
Takashi Ohmasa 67f18f3458 [ARM] 4629/1: Fix VFP emulation code to clear all exception flags of FPEXC
All exception flags of the FPEXC register must be cleared before
returning from exception code to user code, including FP2V and OFC.

Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-20 23:42:15 +01:00
Sam Ravnborg 222d394d30 kbuild: enable 'make AFLAGS=...' to add additional options to AS
The variable AFLAGS is a wellknown variable and the usage by
kbuild may result in unexpected behaviour.
On top of that several people over time has asked for a way to
pass in additional flags to gcc.

This patch replace use of AFLAGS with KBUILD_AFLAGS all over
the tree.

Patch was tested on following architectures:
alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-15 21:59:31 +02:00
Tzachi Perelstein b9338a78fc [ARM] 4567/1: Fix 'Oops - undefined instruction' when CONFIG_VFP=y on non VFP device
vfp_init() takes care of the condition when CONFIG_VFP=y but no real VFP
device exists. However, when this condition is true, a compiler might
misplace code lines in a way that will break this support. (To be more
specific - fmrx(FPSID) might be executed before vfp_testing_entry
assignment, which will end up with Oops - undefined instruction).
This patch adds a barrier() to guarantee the right execution ordering.

Signed-off-by: Assaf Hoffman
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-09-13 15:10:27 +01:00
Russell King 228adef16d [ARM] vfp: make fpexc bit names less verbose
Use the fpexc abbreviated names instead of long verbose names
for fpexc bits.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:39:57 +01:00
Russell King 5d4cae5fe2 [ARM] VFP: fix section mismatch error
Fix a real section mismatch issue; the test code is thrown away after
initialisation, but if we do not detect the VFP hardware, it is left
hooked into the exception handler.  Any VFP instructions which are
subsequently executed risk calling the discarded exception handler.

Introduce a new "null" handler which returns to the "unrecognised
fault" return address.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-06-10 12:22:20 +01:00
Russell King 7531a1c2c4 [ARM] Remove unnecessary asm/ptrace.h from VFP support code
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-22 10:56:40 +01:00
Catalin Marinas c642846489 [ARM] 4111/1: Allow VFP to work with thread migration on SMP
The current lazy saving of the VFP registers is no longer possible
with thread migration on SMP. This patch implements a per-CPU
vfp-state pointer and the saving of the VFP registers at every context
switch. The registers restoring is still performed in a lazy way.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-25 16:35:29 +00:00
Russell King 8e140362f7 [ARM] Fix VFP initialisation issue for SMP systems
When we install the handlers for context switching, we must enable
VFP on all CPU cores, otherwise undefined (and random) effects
occur.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-02 23:40:30 +00:00
Russell King efe90d273b [ARM] Handle HWCAP_VFP in VFP support code
Don't set HWCAP_VFP in the processor support file; not only does it
depend on the processor features, but it also depends on the support
code being present.  Therefore, only set it if the support code
detects that we have a VFP coprocessor attached.

Also, move the VFP handling of the coprocessor access register into
the VFP support code.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-08 16:05:26 +00:00
Takashi Ohmasa e0f205d9c6 [ARM] 3900/1: Fix VFP Division by Zero exception handling.
The SIGFPE signal should be generated if Division by Zero exception is detected.

Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28 10:15:31 +01:00
Takashi Ohmasa e816d71a50 [ARM] 3899/1: Fix the normalization of the denormal double precision number.
The significand should be shifted until the value of bit [62] is 1
to normalize the denormal double number.

Signed-off-by: Takashi Ohmasa <ohmasa.takashi@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-28 10:15:31 +01:00
Al Viro 35d59fc5d6 [PATCH] arm __user annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:17:05 -07:00
Frederik Deweerdt 42d3fb5a87 [PATCH] arm build fail: vfpsingle.c
It looks like Zach Brown's patch pr_debug-check-pr_debug-arguments
worked as inteded. That is, it doesn't "allow completely incorrect code
to build." :).

The arm build fails with the following message:
  CC      arch/arm/vfp/vfpsingle.o
  arch/arm/vfp/vfpsingle.c: In function `__vfp_single_normaliseround':
  arch/arm/vfp/vfpsingle.c:201: error: `func' undeclared (first use in
  this function)
  arch/arm/vfp/vfpsingle.c:201: error: (Each undeclared identifier is
  reported only once
  arch/arm/vfp/vfpsingle.c:201: error: for each function it appears in.)
  make[1]: *** [arch/arm/vfp/vfpsingle.o] Error 1
  make: *** [arch/arm/vfp] Error 2

The following patch fixes the issue by using func only when DEBUG is
defined.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 08:04:20 -07:00
Russell King baf97ce6ed [ARM] Cleanups for 4cc9bd2eaa
- Document the meaning for OP_SCALAR, OP_SD and add OP_DD.
- Formatting cleanups
- Remove now redundant code for making compare instructions
  operate on scalar values.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:59 +01:00
Gen FUKATSU 4cc9bd2eaa [ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instruction
VECITR in Floating-Point Exception register indicates the number of
remaining short vector iterations after a potential exception was
detected.

In case of exception caused by scalar instructions, VECITR is NOT updated.
Therefore emulation for VFP must ignore VECITR field
and treat "veclen" as zero when recognizing scalar instructing.

Signed-off-by: Gen Fukatsu <fukatsu.gen@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25 10:34:06 +01:00
Daniel Jacobowitz 6a39dd6222 [ARM] 3759/2: Remove uses of %?
Patch from Daniel Jacobowitz

The ARM kernel has several uses of asm("foo%?").  %? is a GCC internal
modifier used to output conditional execution predicates.  However, no
version of GCC supports conditionalizing asm statements.  GCC 4.2 will
correctly expand %? to the empty string in user asms.  Earlier versions may
reuse the condition from the previous instruction.  In 'if (foo) asm
("bar%?");' this is somewhat likely to be right... but not reliable.

So, the only safe thing to do is to remove the uses of %?.  I believe
the tlbflush.h occurances were supposed to be removed before, based
on the comment about %? not working at the top of that file.

Old versions of GCC could omit branches around user asms if the asm didn't
mark the condition codes as clobbered.  This problem hasn't been seen on any
recent (3.x or 4.x) GCC, but it could theoretically happen.  So, where
%? was removed a cc clobber was added.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20 14:58:35 +01:00
Russell King 681a4991f8 [ARM] Optimise VFP thread notify function a little
The common case for the thread notifier is a context switch.  Tell
gcc that this is the most likely condition so it can optimise the
function for this case.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-20 14:58:35 +01:00
Daniel Jacobowitz 0355b3e039 [ARM] 3750/3: Fix double VFP emulation for EABI kernels
Patch from Daniel Jacobowitz

vfp_put_double didn't work in a CONFIG_AEABI kernel.  By swapping
the arguments, we arrange for them to be in the same place regardless
of ABI.  I made the same change to vfp_put_float for consistency.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-30 15:06:39 +01:00
Daniel Jacobowitz b53a2b41f1 [ARM] 3758/1: Preserve signalling NaNs in conversion
Patch from Daniel Jacobowitz

The fcvtds and fcvtsd instructions were generating a qnan bit pattern
for both quiet and signalling NaNs.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27 12:42:14 +01:00
Daniel Jacobowitz c29ecac18c [ARM] 3749/3: Correct VFP single/double conversion emulation
Patch from Daniel Jacobowitz

The fcvtsd/fcvtds emulation was left behind when the numbering of double
precision registers was changed from 0-30 to 0-15.  Both conversion
instructions were writing their results to the wrong register.  Also,
the conversion instructions should stop after the first element even
if a vector length is specified.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27 12:42:10 +01:00
Daniel Jacobowitz 7c6f25141b [ARM] 3748/3: Correct error check in vfp_raise_exceptions
Patch from Daniel Jacobowitz

The recent fix to hide VFP_NAN_FLAG broke the check in vfp_raise_exceptions;
it would attempt to deliver an exception mask of 0xfffffeff instead of reporting
a serious error condition using printk.  Define a safe constant to use for
an invalid exception maskm, and use it at both ends.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-08-27 12:42:08 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Russell King 1a6be26d5b [ARM] Enable VFP to be built when non-VFP capable CPUs are selected
Since we pass flags to the compiler to control code generation based
on the least capable selected CPU, if we want to include VFP support,
we must tweak the assembler flags to allow the VFP instructions.
Moreover, we must not use the mrrc/mcrr versions since these will not
be recognised by the assembler.

We do not convert all instructions to the VFP-equivalent (yet) since
binutils appears to barf on "fmrx rn, fpinst" and doesn't provide any
other way (other than using the mrc equivalent) to encode this
instruction - which is rather a problem when you have a VFP
implementation which requires these instructions.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:24:24 +01:00
Russell King d6551e884c [ARM] Add thread_notify infrastructure
Some machine classes need to allow VFP support to be built into the
kernel, but still allow the kernel to run even though VFP isn't
present.  Unfortunately, the kernel hard-codes VFP instructions
into the thread switch, which prevents this being run-time selectable.

Solve this by introducing a notifier which things such as VFP can
hook into to be informed of events which affect the VFP subsystem
(eg, creation and destruction of threads, switches between threads.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-22 10:24:18 +01:00
George G. Davis b7d7ef87e1 [ARM] 3499/1: Fix VFP FPSCR corruption for double exception case
Patch from George G. Davis

The ARM VFP FPSCR register is corrupted when a condition flags modifying
VFP instruction is followed by a non-condition flags modifying VFP
instruction and both instructions raise exceptions.  The fix is to
read the current FPSCR in between emulation of these two instructions
and use the current FPSCR value when handling the second exception.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-05-05 22:32:23 +01:00
Russell King 928bd1b470 [ARM] vfp: fix leak of VFP_NAN_FLAG into FPSCR
The VFP code can leak VFP_NAN_FLAG into the FPSCR. It doesn't correspond
to any real FPSCR bit (and overlaps one of the exception flags).

Bug report from Daniel Jacobowitz

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-25 20:41:27 +01:00
Catalin Marinas 1356c1948d [ARM] 3473/1: Use numbers 0-15 for the VFP double registers
Patch from Catalin Marinas

This patch changes the double registers numbering to 0-15 from even 0-30,
in preparation for future VFP extensions. It also fixes the VFP_REG_ZERO
bug (value 16 actually represents the 8th double register with the original
numbering).

The original mcrr/mrrc on CP10 were generating FMRRS/FMSRR instead of
FMRRD/FMDRR. The patch changes to CP11 for the correct instructions.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-10 21:32:46 +01:00