Commit Graph

371 Commits

Author SHA1 Message Date
Hans-Christian Egtvedt 45c349b58c avr32: add support for EarthLCD Favr-32 board
This patch adds support for the Favr-32 board made by EarthLCD.

This kit, which is also called ezLCD-101, has a 10.4" touch screen LCD panel,
16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device,
SD-card slot, USART and various other connectors for cennecting stuff to SPI,
I2C, GPIO, etc.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 16:01:18 +02:00
Hans-Christian Egtvedt a3bee42f05 avr32: Add support for EVKLCD10X addon boards
This patch lets the user enable support for EVKLCD100 and EVKLCD101
(refered to by EVKLCD10X). By enabling EVKLCD10X support the LCD
controller and AC97 controller platform devices are added.

The user can also choose between the EVKLCD100 (QVGA display) and the
EVKLCD101 (VGA display), this is added to automagically select the
correct panel timing and resolution parameters.

Enabling support for EVKLCD10X addon board will cripple the MCI platform
device a bit since they share two GPIO lines (detect and write-protect).
These two lines are disabled when EVKLCD10X is enabled.

The default configurations are based upon ATNGW100, but with added AC97C
and LCDC driver. Virtual terminal is also enabled by default for
EVKLCD10X boards.

Verified on hardware with a NGW100 + EVKLCD100/101.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:56:24 +02:00
Haavard Skinnemoen 1d3ba686ed avr32: Kconfig: Remove pointless if around atstk1000 include
The contents of the ATSTK1000 Kconfig file itself is completely
conditional, so including it conditionally makes no sense and only adds
clutter.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-13 12:48:14 +02:00
Haavard Skinnemoen 6eb3ebe04d avr32: Fix build failures in board code
Fix a few instances of board code breakage introduced by the atmel-mci
platform interface changes.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-12 16:13:28 +02:00
Julien May caf18f19ee avr32: Allow selecting multiple pins at once
at32_select_periph() now takes an u32 bitmask rather than a single pin.
This allows to set multiple pins at once.

Signed-off-by: Alex Raimondi <mailinglist@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-12 15:54:00 +02:00
Haavard Skinnemoen 0d62950125 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/atmel-mci-2.6.28 2008-10-12 15:44:33 +02:00
Haavard Skinnemoen b3bc2c5562 avr32: Minor pm_power_off cleanup
Include <linux/pm.h> to see the declaration of pm_power_off, and remove
unneeded NULL initializer.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-08 18:44:58 +02:00
Haavard Skinnemoen 520bab804e avr32: Implement {read,write}[bwl]_be
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-08 18:44:57 +02:00
Haavard Skinnemoen 65e8b083fc atmel-mci: Add experimental DMA support
This adds support for DMA transfers through the generic DMA engine
framework with the DMA slave extensions.

The driver has been tested using mmc-block and ext3fs on several SD,
SDHC and MMC+ cards. Reads and writes work fine, with read transfer
rates up to 7.5 MiB/s on fast cards with debugging disabled.

Unfortunately, the driver has been known to lock up from time to time
with DMA enabled, so DMA support is currently optional and marked
EXPERIMENTAL. However, I didn't see any problems while testing 13
different cards (MMC, SD and SDHC of different brands and sizes), so I
suspect the "Initialize BLKR before sending data transfer command" fix
that was posted earlier fixed this as well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Haavard Skinnemoen 965ebf33ea atmel-mci: support multiple mmc slots
The Atmel MCI controller can drive multiple cards through separate sets
of pins, but only one at a time. This patch adds support for
multiplexing access to the controller so that multiple card slots can be
used as if they were hooked up to separate mmc controllers.

The atmel-mci driver registers each slot as a separate mmc_host. Both
access the same common controller state, but they also have some state
on their own for card detection/write protect handling, and separate
shadows of the MR and SDCR registers.

When one of the slots receives a request from the mmc core, the common
controller state is checked. If it's idle, the request is submitted
immediately. If not, the request is added to a queue. When a request is
done, the queue is checked and if there is a queued request, it is
submitted before the completion callback is called.

This patch also includes a few cleanups and fixes, including a locking
overhaul. I had to change the locking extensively in any case, so I
might as well try to get it right. The driver no longer takes any
irq-safe locks, which may or may not improve the overall system
performance.

This patch also adds a bit of documentation of the internal data
structures.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Haavard Skinnemoen 6b918657b7 atmel-mci: Platform code for supporting multiple mmc slots
Add the necessary platform infrastructure to support multiple mmc/sdcard
slots all at once through a single controller. Currently, the driver
will use the first valid slot it finds and stick with that, but later
patches will add support for switching between several slots on the fly.

Extend the platform data structure with per-slot information: MMC/SDcard
bus width and card detect/write protect pins. This will affect the pin
muxing as well as the capabilities announced to the mmc core.

Note that board code is now required to supply a mci_platform_data
struct to at32_add_device_mci().

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 20:39:21 +02:00
Alex Raimondi 300bb76251 avr32: Replace static clock list with dynamic linked list
This replaces the at32_clock_list array with a linked list.
Clocks can now be registered (added) to the list.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-10-05 19:33:48 +02:00
Uwe Kleine-König 787928e747 avr32: Use platform_driver_probe for pdc platform driver
The probe function of the pdc platform driver lives in the init section
and so a pdc device that is created after the init section is discarded
probably results in an oops.  Even if this cannot happen, using
platform_driver_probe is cleaner.  (If this can happen and should be
supported the probe function must live in the devinit section instead.)

Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:03 +02:00
Uwe Kleine-König d6634db8fe avr32: Use platform_driver_probe for pio platform driver
The probe function of the pio platform driver lives in the init section
and so a pio device that is created after the init section is discarded
probably results in an oops.  Even if this cannot happen, using
platform_driver_probe is cleaner.  (If this can happen and should be
supported the probe function must live in the devinit section instead.)

Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:03 +02:00
Haavard Skinnemoen ece2678c62 avr32: Provide a way to deselect pins in the portmux
Currently, setting up the portmux is completely one-shot: Once a pin is
muxed, the portmux driver will complain loudly and refuse to do anything
if you try to set up the same pin again.

Sometimes, it may be necessary to change the configuration of a pin
after it has been set up initially. This patch adds a way to undo the
previous configuration, allowing the pin to be reconfigured.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:02 +02:00
David Brownell 96706600de ngw100: export J15 through sysfs
The NGW100 board has jumper J15 (near the reset button) which
is unused.  This patch exports it through the GPIO sysfs support
(as /sys/class/gpio/gpio62/value) so that it's easily queried
by boot scripts or whatever might want to know if the jumper
has been installed (value = 0) or not (value = 1, "default").

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
[haavard.skinnemoen@atmel.com: add missing include]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Julien May 7066412488 avr32: Allow fine-grained control over LCDC pins
This replaces the pin_config param with an u64 pin_mask in
at32_add_device_lcdc, allowing a board-maintainer to indivually select
specific lcdc pins.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Julien May <jmay@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Marco Stornelli 48c1fd3882 avr32: added mem kernel command line option support
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Nikolaus Voss 3d25615147 Add kernel support for oprofile callgraphs on AVR32
This patch adds backtracing capability to oprofile profiling in kernel
and user mode on AVR32. This is done by going through the frames on the
stack and adding oprofile traces for all return addresses. The code
being profiled has to be compiled with frame pointers to make this work.

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:01 +02:00
Harvey Harrison f3c450be7b avr32: use the new byteorder headers
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
[haavard.skinnemoen@atmel.com: fix <mach/io.h> build breakage]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-22 09:51:00 +02:00
Manfred Spraul 3d431a7427 avr32: nmi_enter() without nmi_exit()
While updating the rcu code, I noticed that do_nmi() for AVR32 is odd:
There is an nmi_enter() call without an nmi_exit().
This can't be correct, it breaks rcu (at least the preempt version) and
lockdep.

[haavard.skinnemoen@atmel.com: fixed another case that returned directly]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 20:08:08 +02:00
Hans-Christian Egtvedt 73d4393d1d avr32: fix sys_sync_file_range() call convention
On AVR32, all parameters beyond the 5th are passed on the stack. System
calls don't use the stack -- they borrow a callee-saved register
instead. This means that syscalls that take 6 parameters must be called
through a stub that pushes the last parameter on the stack.

This patch adds a stub for sync_file_range syscall on AVR32
architecture.  Tested with uClibc snapshot.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:31 +02:00
Hans-Christian Egtvedt e37925ebdb avr32: add generic_find_next_le_bit bit function
This patch implements the generic_find_next_le_bit bit function for AVR32
architecture. This is used by EXT4 file system.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:30 +02:00
Markus Heidelberg 1b771c12b5 avr32: add .gitignore files
Ignore Kernel binaries, kernel/vmlinux.lds and a log file.

Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:29 +02:00
Haavard Skinnemoen 7fb61a7b6f atstk1000: fix build breakage with BOARD_ATSTK100X_SW2_CUSTOM=y
The #ifdef surrounding the code adding the mmc controller had a typo,
causing it to be compiled even when mmc was supposed to be disabled.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-19 18:21:29 +02:00
Adrian Bunk 9d5a9e7465 Remove asm/a.out.h files for all architectures without a.out support.
This patch also includes the required removal of (unused) inclusion of
<asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these
architectures.

[dwmw2: updated for 2.6.27-rc]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06 19:30:24 +01:00
Humphrey Bucknell 84c4f2f21a avr32: pm_standby low-power ram bug fix
The value stored into the SDRAMC LPR register should be the current
value of the register with the Self-refresh value set in the lower bit
field.

The bug involved only the Self-refresh value being written to the
register, thus over writing any low-power ram settings.

Signed-off-by: Humphrey Bucknell <hbucknell@saitek.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-01 13:04:09 +02:00
Haavard Skinnemoen 9e3f544d79 avr32: Fix lockup after Java stack underflow in user mode
When using the Java Extension Module hardware, a Java stack underflow or
overflow trap may cause the system to enter an infinite exception loop.
Although there's no kernel support for the Java hardware yet, we need to
be able to recover from this situation and keep the system running.

This patch adds code to detect and fixup this situation in the critical
exception handler and terminate the faulting process. We may have to
rethink how to handle this more gracefully when the necessary kernel
support for hardware-accelerated Java is added.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-09-01 13:04:04 +02:00
Haavard Skinnemoen 33f197a603 avr32: Make atstk1006_nand_data definition static
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:44:56 +02:00
Haavard Skinnemoen 0fe9497e77 avr32: Reduce DataFlash bus speed to 8 MHz on ATNGW100
Doing this in combination with "atmel_spi: fix hang due to missed
interrupt" appears to eliminate the overruns I'm seeing when using
JFFS2-on-DataFlash as /usr filesystem on the ATNGW100.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:44:41 +02:00
Haavard Skinnemoen 30930a44a4 avr32: Update defconfigs
Enable power management, DMA and MMC on all boards except ATSTK1004, and
add defconfig for the new ATSTK1006 board with NAND flash, UBI and UBIFS
enabled as well.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:44:41 +02:00
Haavard Skinnemoen b47eb4092f avr32: Clean up HMATRIX code
Introduce a few helper functions for HMATRIX configuration and clean up
the register definitions. Also add definitions for the HMATRIX master
and slave IDs on the AT32AP700x chips.

Also make the definitions in hmatrix.h available to board code by moving
it to <mach/hmatrix.h>

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:44:01 +02:00
Haavard Skinnemoen a8d902db22 avr32: Add MMIO address definitions for certain controllers
Hardcoded MMIO base addresses are used a few places throughout the
platform code. Move these into the chip-specific header file so that
adding support for new chips becomes a bit easier.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:42:14 +02:00
Haavard Skinnemoen 8f8a59c664 avr32: Introduce <mach/chip.h>
This file includes the appropriate chip-specific header with MMIO, IRQ
and GPIO definitions used by the platform code. It may also be used to
provide inline GPIO accessors for drivers that are willing to sacrifice
portability for faster bitbanging.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:41:56 +02:00
Haavard Skinnemoen a7448db482 avr32: Remove include/asm-avr32/arch-at32ap
Since all users have been converted over to use <mach/foo.h>, there's no
need for the arch-at32ap directory and associated symlink anymore.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08 12:31:55 +02:00
Haavard Skinnemoen 3663b736a5 avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>
Update all avr32-specific files to use the new platform-specific header
locations. Drivers shared with ARM are left alone for now.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-05 14:36:57 +02:00
Haavard Skinnemoen 964d219b6a avr32: Introduce arch/avr32/mach-*/include/mach
Add arch/avr32/mach-*/include to include search path and copy all the
files from include/asm/arch there. The old files will be removed once
ARM does the same change and all common drivers are converted.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-05 13:49:09 +02:00
Haavard Skinnemoen 84db8d7cdb avr32: Move include/asm-avr32 to arch/avr32/include/asm
Leaving include/asm/arch alone for now.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-05 13:35:07 +02:00
David Brownell 3c26e17032 avr32: some mmc/sd cleanups
Minor cleanups for the MMC/SD support on avr32:

 - Make at32_add_device_mci() properly initialize "missing"
   platform data ... so boards like STK1002 won't try GPIO 0.

 - Switch over to gpio_is_valid() instead of testing for only
   one designated value.

 - Provide STK1002 platform data for the unlikely case that
   switches are set so first Ethernet controller isn't in use.
   (That's the only way to get card detect and writeprotect
   switch sensing on the STK1000.)

And get rid of one "unused variable" warning.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-27 13:57:36 +02:00
Haavard Skinnemoen eda3d8f560 Merge commit 'upstream/master' 2008-07-27 13:54:08 +02:00
Linus Torvalds 9ee08c2df4 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (57 commits)
  [MTD] [NAND] subpage read feature as a way to increase performance. 
  CPUFREQ: S3C24XX NAND driver frequency scaling support.
  [MTD][NAND] au1550nd: remove unused variable
  [MTD] jedec_probe: Fix SST 16-bit chip detection
  [MTD][MTDPART] Fix a division by zero bug
  [MTD][MTDPART] Cleanup and document the erase region handling
  [MTD][MTDPART] Handle most checkpatch findings
  [MTD][MTDPART] Seperate main loop from per-partition code in add_mtd_partition
  [MTD] physmap: resume already suspended chips on failure to suspend
  [MTD] physmap: Fix suspend/resume/shutdown bugs.
  [MTD] [NOR] Fix -ETIMEO errors in CFI driver
  [MTD] [NAND] fsl_elbc_nand: fix section mismatch with CONFIG_MTD_OF_PARTS=y
  [JFFS2] Use .unlocked_ioctl
  [MTD] Fix const assignment in the MTD command line partitioning driver
  [MTD] [NOR] gen_probe: No debug message when debugging is disabled
  [MTD] [NAND] remove __PPC__ hardcoded address from DiskOnChip drivers
  [MTD] [MAPS] Remove the bast-flash driver.
  [MTD] [NAND] fsl_elbc_nand: ecclayout cleanups
  [MTD] [NAND] fsl_elbc_nand: implement support for flash-based BBT
  [MTD] [NAND] fsl_elbc_nand: fix OOB workability for large page NAND chips
  ...
2008-07-26 20:30:56 -07:00
Johannes Weiner 46244a2b3c avr32: use generic show_mem()
Remove arch-specific show_mem() in favor of the generic version.

This also removes the following redundant information display:

	- free pages, printed by show_free_areas()
	- pages in slabs, printed by show_free_areas()
	- pages in swapcache, printed by show_swap_cache_info()

where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:10 -07:00
Michael Buesch 7444a72eff gpiolib: allow user-selection
This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:30 -07:00
David Brownell d8f388d8dc gpio: sysfs interface
This adds a simple sysfs interface for GPIOs.

    /sys/class/gpio
    	/export ... asks the kernel to export a GPIO to userspace
    	/unexport ... to return a GPIO to the kernel
        /gpioN ... for each exported GPIO #N
	    /value ... always readable, writes fail for input GPIOs
	    /direction ... r/w as: in, out (default low); write high, low
	/gpiochipN ... for each gpiochip; #N is its first GPIO
	    /base ... (r/o) same as N
	    /label ... (r/o) descriptive, not necessarily unique
	    /ngpio ... (r/o) number of GPIOs; numbered N .. N+(ngpio - 1)

GPIOs claimed by kernel code may be exported by its owner using a new
gpio_export() call, which should be most useful for driver debugging.
Such exports may optionally be done without a "direction" attribute.

Userspace may ask to take over a GPIO by writing to a sysfs control file,
helping to cope with incomplete board support or other "one-off"
requirements that don't merit full kernel support:

  echo 23 > /sys/class/gpio/export
	... will gpio_request(23, "sysfs") and gpio_export(23);
	use /sys/class/gpio/gpio-23/direction to (re)configure it,
	when that GPIO can be used as both input and output.
  echo 23 > /sys/class/gpio/unexport
	... will gpio_free(23), when it was exported as above

The extra D-space footprint is a few hundred bytes, except for the sysfs
resources associated with each exported GPIO.  The additional I-space
footprint is about two thirds of the current size of gpiolib (!).  Since
no /dev node creation is involved, no "udev" support is needed.

Related changes:

  * This adds a device pointer to "struct gpio_chip".  When GPIO
    providers initialize that, sysfs gpio class devices become children of
    that device instead of being "virtual" devices.

  * The (few) gpio_chip providers which have such a device node have
    been updated.

  * Some gpio_chip drivers also needed to update their module "owner"
    field ...  for which missing kerneldoc was added.

  * Some gpio_chips don't support input GPIOs.  Those GPIOs are now
    flagged appropriately when the chip is registered.

Based on previous patches, and discussion both on and off LKML.

A Documentation/ABI/testing/sysfs-gpio update is ready to submit once this
merges to mainline.

[akpm@linux-foundation.org: a few maintenance build fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:30 -07:00
David Woodhouse ff877ea80e Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6 2008-07-25 10:40:14 -04:00
Voss, Nikolaus 56d3eef2b4 avr32: allow system timer to share interrupt to make OProfile work
The following patch allows the avr32_comparator interrupt to be shared.
This is necessary as the avr32 oprofile driver shares the irq group 0
with the timer.

To make OProfile actually work on AVR32, a small patch for oprofiled is
also needed (posted to the oprofile mailing list).

Signed-off-by: Nikolaus Voss <n.voss@weinmann.de>
[haavard.skinnemoen@atmel.com: set IRQF_SHARED unconditionally]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-25 14:31:29 +02:00
Linus Torvalds ecc8b655b3 Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
  nohz: prevent tick stop outside of the idle loop
2008-07-24 12:55:01 -07:00
Linus Torvalds 2528ce3237 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  arch/mips/kernel/stacktrace.c: Heiko can't type
  kthread: reduce stack pressure in create_kthread and kthreadd
  fix core/stacktrace changes on avr32, mips, sh
2008-07-24 12:54:26 -07:00
Andrea Righi 27ac792ca0 PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:

	u64 val = PAGE_ALIGN(size);

always returns a value < 4GB even if size is greater than 4GB.

The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):

#define PAGE_SHIFT      12
#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK       (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr)       (((addr)+PAGE_SIZE-1)&PAGE_MASK)

The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.

Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.

See also lkml discussion: http://lkml.org/lkml/2008/6/11/237

[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:21 -07:00
Johannes Weiner 3560e249ab bootmem: replace node_boot_start in struct bootmem_data
Almost all users of this field need a PFN instead of a physical address,
so replace node_boot_start with node_min_pfn.

[Lee.Schermerhorn@hp.com: fix spurious BUG_ON() in mark_bootmem()]
Signed-off-by: Johannes Weiner <hannes@saeureba.de>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:20 -07:00
Johannes Weiner 9109fb7b35 mm: drop unneeded pgdat argument from free_area_init_node()
free_area_init_node() gets passed in the node id as well as the node
descriptor.  This is redundant as the function can trivially get the node
descriptor itself by means of NODE_DATA() and the node's id.

I checked all the users and NODE_DATA() seems to be usable everywhere
from where this function is called.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:16 -07:00
David Brownell 9483a578df add HAVE_CLK to Kconfig, for driver dependencies
Flag platforms as HAVE_CLK (or not) in Kconfig, based on whether they
support <linux/clk.h> calls, so that otherwise portable drivers which need
those calls can list that dependency.

Something like this is a prerequisite for merging the musb_hdrc driver,
currently used on platforms including Davinci, OMAP2430, OMAP3xx ...  and
the discrete TUSB6010 chip, which doesn't have a natural platform
dependency.  (Used with OMAP 2420 in current Nokia N8x0 tablets.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24 10:47:13 -07:00
Hans-Christian Egtvedt 218df4a25a avr32: Add platform data for AC97C platform device
This patch adds platform data to the AC97C platform device. This will
let the board add a GPIO line which is connected to the external codecs
reset line.

The platform data, ac97c_platform_data, must also contain the DMA
controller ID, RX channel ID and TX channel ID.

Tested with Wolfson WM9712 and AP7000.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-24 13:51:46 +02:00
Linus Torvalds 5554b35933 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits)
  I/OAT: I/OAT version 3.0 support
  I/OAT: tcp_dma_copybreak default value dependent on I/OAT version
  I/OAT: Add watchdog/reset functionality to ioatdma
  iop_adma: cleanup iop_chan_xor_slot_count
  iop_adma: document how to calculate the minimum descriptor pool size
  iop_adma: directly reclaim descriptors on allocation failure
  async_tx: make async_tx_test_ack a boolean routine
  async_tx: remove depend_tx from async_tx_sync_epilog
  async_tx: export async_tx_quiesce
  async_tx: fix handling of the "out of descriptor" condition in async_xor
  async_tx: ensure the xor destination buffer remains dma-mapped
  async_tx: list_for_each_entry_rcu() cleanup
  dmaengine: Driver for the Synopsys DesignWare DMA controller
  dmaengine: Add slave DMA interface
  dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap
  dmaengine: Add dma_client parameter to device_alloc_chan_resources
  dmatest: Simple DMA memcpy test client
  dmaengine: DMA engine driver for Marvell XOR engine
  iop-adma: fix platform driver hotplug/coldplug
  dmaengine: track the number of clients using a channel
  ...

Fixed up conflict in drivers/dca/dca-sysfs.c manually
2008-07-23 12:03:18 -07:00
Andi Kleen 4a0b2b4dbe sysdev: Pass the attribute to the low level sysdev show/store function
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.

I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.

I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.

Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 21:55:02 -07:00
Ingo Molnar 9b610fda0d Merge branch 'linus' into timers/nohz 2008-07-18 19:53:16 +02:00
Thomas Gleixner b8f8c3cf0a nohz: prevent tick stop outside of the idle loop
Jack Ren and Eric Miao tracked down the following long standing
problem in the NOHZ code:

	scheduler switch to idle task
	enable interrupts

Window starts here

	----> interrupt happens (does not set NEED_RESCHED)
	      	irq_exit() stops the tick

	----> interrupt happens (does set NEED_RESCHED)

	return from schedule()
	
	cpu_idle(): preempt_disable();

Window ends here

The interrupts can happen at any point inside the race window. The
first interrupt stops the tick, the second one causes the scheduler to
rerun and switch away from idle again and we end up with the tick
disabled.

The fact that it needs two interrupts where the first one does not set
NEED_RESCHED and the second one does made the bug obscure and extremly
hard to reproduce and analyse. Kudos to Jack and Eric.

Solution: Limit the NOHZ functionality to the idle loop to make sure
that we can not run into such a situation ever again.

cpu_idle()
{
	preempt_disable();

	while(1) {
		 tick_nohz_stop_sched_tick(1); <- tell NOHZ code that we
		 			          are in the idle loop

		 while (!need_resched())
		       halt();

		 tick_nohz_restart_sched_tick(); <- disables NOHZ mode
		 preempt_enable_no_resched();
		 schedule();
		 preempt_disable();
	}
}

In hindsight we should have done this forever, but ... 

/me grabs a large brown paperbag.

Debugged-by: Jack Ren <jack.ren@marvell.com>, 
Debugged-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-07-18 18:10:28 +02:00
Heiko Carstens 8b95d9172b fix core/stacktrace changes on avr32, mips, sh
Fixes this type of problem:

  CC      arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration

caused by "stacktrace: export save_stack_trace[_tsk]"

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 14:42:35 +02:00
Ben Nizette fbfca4b878 avr32: clean up mci platform code
This patch does a few small cleanups around the atmel mci platform code
and in the atmel-mci driver.  The platform changes simply removes an
unused variable, uses the fact that by the end we always have some form
of platform data and notes that GPIO_PIN_NONE != 0.  This last point
could cause the incorrect attempt to twice reserve pin PA0.

While we've got the hood up, add linux/err.h to the atmel-mci.c include
list.  It needs it and generally pulls it by voodoo but I did once
stumble across a config which don't build.

This is against Linus' latest git.

Signed-off-by: Ben Nizette <bn@niasdigital.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-18 11:01:16 +02:00
Adrian Bunk 62fe8378d9 fix avr32 build errors
Commit 7d2be0749a
(atmel-mci: Driver for Atmel on-chip MMC controllers)
causes build errors like:

<--  snip  -->

...
  CC      arch/avr32/boards/atstk1000/atstk1003.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c: In function 'atstk1003_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/avr32/boards/atstk1000/atstk1003.c:157: error: too few arguments to function 'at32_add_device_mci'
make[2]: *** [arch/avr32/boards/atstk1000/atstk1003.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-17 21:01:34 +02:00
Linus Torvalds 8a0ca91e1d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: (68 commits)
  sdio_uart: Fix SDIO break control to now return success or an error
  mmc: host driver for Ricoh Bay1Controllers
  sdio: sdio_io.c Fix sparse warnings
  sdio: fix the use of hard coded timeout value.
  mmc: OLPC: update vdd/powerup quirk comment
  mmc: fix spares errors of sdhci.c
  mmc: remove multiwrite capability
  wbsd: fix bad dma_addr_t conversion
  atmel-mci: Driver for Atmel on-chip MMC controllers
  mmc: fix sdio_io sparse errors
  mmc: wbsd.c fix shadowing of 'dma' variable
  MMC: S3C24XX: Refuse incorrectly aligned transfers
  MMC: S3C24XX: Add maintainer entry
  MMC: S3C24XX: Update error debugging.
  MMC: S3C24XX: Add media presence test to request handling.
  MMC: S3C24XX: Fix use of msecs where jiffies are needed
  MMC: S3C24XX: Add MODULE_ALIAS() entries for the platform devices
  MMC: S3C24XX: Fix s3c2410_dma_request() return code check.
  MMC: S3C24XX: Allow card-detect on non-IRQ capable pin
  MMC: S3C24XX: Ensure host->mrq->data is valid
  ...

Manually fixed up bogus executable bits on drivers/mmc/core/sdio_io.c
and include/linux/mmc/sdio_func.h when merging.
2008-07-16 15:17:52 -07:00
Linus Torvalds af5329cdf5 Merge branch 'core/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/stacktrace' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  generic-ipi: powerpc/generic-ipi tree build failure
  stacktrace: fix build failure on sparc64
  stacktrace: export save_stack_trace[_tsk]
  stacktrace: fix modular build, export print_stack_trace and save_stack_trace
  backtrace: replace timer with tasklet + completions
  stacktrace: add saved stack traces to backtrace self-test
  stacktrace: print_stack_trace() cleanup
  debugging: make stacktrace independent from DEBUG_KERNEL
  stacktrace: don't crash on invalid stack trace structs
2008-07-15 10:31:35 -07:00
Haavard Skinnemoen 7d2be0749a atmel-mci: Driver for Atmel on-chip MMC controllers
This is a driver for the MMC controller on the AP7000 chips from
Atmel. It should in theory work on AT91 systems too with some
tweaking, but since the DMA interface is quite different, it's not
entirely clear if it's worth merging this with the at91_mci driver.

This driver has been around for a while in BSPs and kernel sources
provided by Atmel, but this particular version uses the generic DMA
Engine framework (with the slave extensions) instead of an
avr32-only DMA controller framework.

This driver can also use PIO transfers when no DMA channels are
available, and for transfers where using DMA may be difficult or
impractical for some reason (e.g. the DMA setup overhead is usually
not worth it for very short transfers, and badly aligned buffers or
lengths are difficult to handle.)

Currently, the driver only support PIO transfers. DMA support has been
split out to a separate patch to hopefully make it easier to review.

The driver has been tested using mmc-block and ext3fs on several SD,
SDHC and MMC+ cards. Reads and writes work fine, with read transfer
rates up to 3.5 MiB/s on fast cards with debugging disabled.

The driver has also been tested using the mmc_test module on the same
cards. All tests except 7, 9, 15 and 17 succeed. The first two are
unsupported by all the cards I have, so I don't know if the driver
handles this correctly. The last two fail because the hardware flags a
Data CRC Error instead of a Data Timeout error. I'm not sure how to deal
with that.

Documentation for this controller can be found in many data sheets from
Atmel, including the AT32AP7000 data sheet which can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-15 14:14:49 +02:00
Linus Torvalds d18bb9a548 Merge branch 'core/rodata' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core/rodata' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  move BUG_TABLE into RODATA
2008-07-14 15:28:10 -07:00
David Woodhouse a8931ef380 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2008-07-11 14:36:25 +01:00
Haavard Skinnemoen 3bfb1d20b5 dmaengine: Driver for the Synopsys DesignWare DMA controller
This adds a driver for the Synopsys DesignWare DMA controller (aka
DMACA on AVR32 systems.) This DMA controller can be found integrated
on the AT32AP7000 chip and is primarily meant for peripheral DMA
transfer, but can also be used for memory-to-memory transfers.

This patch is based on a driver from David Brownell which was based on
an older version of the DMA Engine framework. It also implements the
proposed extensions to the DMA Engine API for slave DMA operations.

The dmatest client shows no problems, but there may still be room for
improvement performance-wise. DMA slave transfer performance is
definitely "good enough"; reading 100 MiB from an SD card running at ~20
MHz yields ~7.2 MiB/s average transfer rate.

Full documentation for this controller can be found in the Synopsys
DW AHB DMAC Databook:

http://www.synopsys.com/designware/docs/iip/DW_ahb_dmac/latest/doc/dw_ahb_dmac_db.pdf

The controller has lots of implementation options, so it's usually a
good idea to check the data sheet of the chip it's intergrated on as
well. The AT32AP7000 data sheet can be found here:

http://www.atmel.com/dyn/products/datasheets.asp?family_id=682


Changes since v4:
  * Use client_count instead of dma_chan_is_in_use()
  * Add missing include
  * Unmap buffers unless client told us not to

Changes since v3:
  * Update to latest DMA engine and DMA slave APIs
  * Embed the hw descriptor into the sw descriptor
  * Clean up and update MODULE_DESCRIPTION, copyright date, etc.

Changes since v2:
  * Dequeue all pending transfers in terminate_all()
  * Rename dw_dmac.h -> dw_dmac_regs.h
  * Define and use controller-specific dma_slave data
  * Fix up a few outdated comments
  * Define hardware registers as structs (doesn't generate better
    code, unfortunately, but it looks nicer.)
  * Get number of channels from platform_data instead of hardcoding it
    based on CONFIG_WHATEVER_CPU.
  * Give slave clients exclusive access to the channel

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>,
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 11:59:42 -07:00
Hans-Christian Egtvedt 72f6befeea avr32: Fix typo of IFSR in a comment in the PIO header file
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-04 09:48:05 +02:00
Ingo Molnar 7b4c9505f2 stacktrace: export save_stack_trace[_tsk]
Andrew Morton reported this against linux-next:

ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined!

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-03 09:17:55 +02:00
Haavard Skinnemoen 02a00cf672 avr32: Power Management support ("standby" and "mem" modes)
Implement Standby support. In this mode, we'll suspend all drivers,
put the SDRAM in self-refresh mode and switch off the HSB bus
("frozen" mode.)

Implement Suspend-to-mem support. In this mode, we suspend all
drivers, put the SDRAM into self-refresh mode and switch off all
internal clocks except the 32 kHz oscillator ("stop" mode.)

The lowest-level suspend code runs from a small portion of SRAM
allocated at startup time. This gets rid of a small potential race
with the SDRAM where we might try to enter self-refresh mode in the
middle of an icache burst. We also relocate all interrupt and
exception handlers to SRAM during the small window when we enter and
exit the low-power modes.

We don't need to do any special tricks to start and stop the PLL. The
main clock is automatically gated by hardware until the PLL is stable.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen aa8e87ca61 avr32: Add system device for the internal interrupt controller (intc)
This makes the intc show up in sysfs (probably not very useful), and
allows us to easily add suspend/resume support later.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen b83d6ee175 avr32: Add simple SRAM allocator
Add SRAM allocator for avr32, which is just a thin wrapper around
genalloc.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen 7951f188a0 avr32: Enable SDRAMC clock at startup
The SDRAM controller needs a clock in order to respond to our
commands, and suspend doesn't work very well without the SDRAM in
self-refresh mode.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-07-02 11:05:01 +02:00
Haavard Skinnemoen 5a4d529277 avr32: Use a quicklist for PGD allocation
Use a quicklist to allocate process PGDs. This is expected to be
slightly faster since we need to copy entries from swapper_pg_dir,
which can stay around for pages on the PGD quick list.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:29 +02:00
Haavard Skinnemoen a9a934f278 avr32: Cover the kernel page tables in the user PGDs
Expand the per-process PGDs so that they cover the kernel virtual
memory area as well. This simplifies the TLB miss handler fastpath
since it doesn't have to check for kernel addresses anymore.

If a TLB miss happens on a kernel address and a second-level page
table can't be found, we check swapper_pg_dir and copy the PGD entry
into the user PGD if it can be found there.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:29 +02:00
Haavard Skinnemoen cfd23e93a0 avr32: Store virtual addresses in the PGD
Instead of storing physical addresses along with page flags in the
PGD, store virtual addresses and use NULL to indicate a not present
second-level page table. A non-page-aligned page table indicates a bad
PMD.

This simplifies the TLB miss handler since it no longer has to check
the Present bit and no longer has to convert the PGD entry from
physical to virtual address. Instead, it has to check for a NULL
entry, which is slightly cheaper than either.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:28 +02:00
Haavard Skinnemoen ebe74597a5 avr32: Remove useless zeroing of swapper_pg_dir at startup
swapper_pg_dir is stored in .bss, so it must already be zeroed out
when we get there.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:28 +02:00
Haavard Skinnemoen b13d618b44 avr32: Clean up and optimize the TLB operations
This and the following patches aim to optimize the code dealing with
page tables and TLB operations. Each patch reduces the time it takes
to gzip a 16 MB file slightly, but I expect things like fork() and
mmap() will improve somewhat more.

This patch deals with the low-level TLB operations:

  * Remove unused _TLBEHI_I define
  * Use gcc builtins instead of inline assembly
  * Remove a few unnecessary pipeline flushes and nops
  * Introduce NR_TLB_ENTRIES define and use it instead of hardcoding it
    to 32 a few places throughout the code.
  * Use sysreg bitops instead of hardcoded shifts and masks
  * Make a few needlessly global functions static

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-02 11:01:28 +02:00
Haavard Skinnemoen d7ff2a4a28 avr32: Rename at32ap.c -> pdc.c
The only thing left in at32ap.c is some PDC stuff. Rename the file to
reflect what it actually does.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-06-28 15:08:48 +02:00
Haavard Skinnemoen 65033ed740 avr32: Move setup_platform() into chip-specific file
Combine at32_clock_init() and at32_portmux_init() into
setup_platform() and remove setup_platform() from at32ap.c. No
functional change since all setup_platform() ever did was call those
two functions.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2008-06-28 15:08:39 +02:00
Haavard Skinnemoen d704fb0cc0 avr32: Kill special exception handler sections
Kill the special exception handler sections .tlbx.ex.text,
.tlbr.ex.text, tlbw.ex.text and .scall.text. Use .org instead to place
the handlers at the required offsets from EVBA.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 17:48:06 +02:00
Haavard Skinnemoen 9dbef285a3 avr32: Clean up time.c #includes
Remove lots of unneeded #includes, add #include <linux/kernel.h> and
sort alphabetically.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 17:48:04 +02:00
Sedji Gaouaou 8405996ff6 atmel_pwm: Rename the "mck" clock to "pwm_clk"
The name "mck" causes a conflict on AT91. Call it "pwm_clk" instead.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:30 +02:00
David Brownell 9c2baf785e at32ap700x spi: enable pullups on MISO
This is a minor tweak to the at32ap700x pin configuration for the SPI
input pin (MISO), enabling the on-chip weak pullup (typical 190K) to

  (a) ensure a fixed data value for missing or input-only slaves;

  (b) prevent power waste associated with inputs floating near VDDIO/2.

Atmel's boards have no external pullup or pulldown on these pins, so
it's unlikely other boards would address these issues with external
pulldowns.  Were there trouble, board-specific code could turn off
the relevant pullup(s).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:29 +02:00
David Brownell 7ef31e9c4e avr32: improve NGW100 I2C/PMBus setup
Basic I2C initialization for the NGW100 board:

  - Provide empty i2c device table. Daughtercards may add devices,
    and the ATtiny24 could do stuff too.

  - Set up EXTINT(3) so the ATtiny24 can interrupt the AP7000.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:29 +02:00
Hans-Christian Egtvedt d86d314f67 avr32: Add PSIF platform devices
This patch adds the PS/2 interface (PSIF) to the device code, split into
two platform devices, one for each port.

The function for adding the PSIF platform device is also added to the
board header file.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:28 +02:00
Hans-Christian Egtvedt 47882cf620 avr32: Add pin configuration choice to LCDC peripheral
This patch lets the board code choose which pin out to use for the LCD
interface.

On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user
choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it
is vital to have the choice to select the alternative pinout since this
pinout is routed to the external headers.

Update ATSTK1002 and ATSTK1004 to use the new interface.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:27 +02:00
David Brownell aafafddb01 avr32: minor GPIO handling updates
On the odd chance some code uses a pin as a GPIO IRQ without calling
gpio_request() or gpio_direction_input(), the debug dump should still
show its pin status.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:32:27 +02:00
Haavard Skinnemoen c1f24ac99f avr32: Fix wrong I/O access size in __raw_readsb
__raw_readsb() should always use byte accesses, never halfword accesses,
to I/O memory.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:50 +02:00
Martin Koegler 7c1b90a1e9 avr32: Fix sigaltstack behaviour
A signal handler should be able to change the signal stack used for the
next signal by altering the ucontext_t passed as a parameter to the
handler. This does not currently work on avr32 since it doesn't update
the in-kernel signal context from the ucontext_t upon signal handler
return.

Fix it by adding a call to do_sigaltstack() from sys_rt_sigreturn(),
bringing it in line with most other architectures.

Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
[haavard.skinnemoen@atmel.com: changed patch description]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:35 +02:00
Alex 60ed7951d0 avr32: Allow board to define oscillator rates
On our custom board we have other oscillator rates than on atngw100 and
atstk100x.

Currently these rates are hardcoded in arch/avr32/mach-at32ap/at32ap700x.c.

This patch moves them into board specific code.

Signed-off-by: Alex Raimondi <raimondi@miromico.ch>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:16 +02:00
Haavard Skinnemoen 8bd8974fcd avr32: export empty_zero_page
Fixes one of two ext4 build problems:
ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined!

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-06-27 15:07:07 +02:00
Ingo Molnar 6d72b7952f Merge branch 'linus' into core/rodata 2008-06-16 11:24:00 +02:00
Håvard Skinnemoen e150d6e725 avr32: Add support for ATSTK1006
The ATSTK1006 is basically an upgraded version of ATSTK1002 with
128 MiB SDRAM and 256 MiB NAND flash on board.

Otherwise, the board is very similar to the ATSTK1002, so it uses the
same board support file.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-07 08:46:24 +01:00
Håvard Skinnemoen 62090a08ab [MTD] [NAND] avr32: atmel_nand platform code for AT32AP700x
This function initializes and adds a platform_device for a NAND flash
interface on SMC chip select 3.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-07 08:45:36 +01:00
Håvard Skinnemoen e1677ce4e4 avr32: move hsmc_init() to core_initcall
The board init code, typically running from postcore_initcall, may
need to set up SMC timings. We have to make sure the SMC driver is
ready before this happens.

Signed-off-by: Håvard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-06-07 08:45:07 +01:00
Haavard Skinnemoen f04d264afc avr32: Fix cpufreq oops when ondemand governor is default
Move the AP7 cpufreq init to late_initcall() so that we don't try to
bring up cpufreq until the governor is ready. x86 also uses
late_initcall() for this.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-27 09:37:42 +02:00
Haavard Skinnemoen d56acacdcd avr32: Update defconfigs
Just provide reasonable defaults for the new stuff. Tickless and
hrtimers are turned on for all boards except ATSTK1004.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:38:29 +02:00
Adrian Bunk 01575995de avr32: export strnlen_user
This patch fixes the following build error:

<--  snip  -->

...
  MODPOST 1327 modules
ERROR: "strnlen_user" [drivers/input/misc/uinput.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:26:36 +02:00
Adrian Bunk a0ed3d8d94 avr32: export copy_page
This patch fixes the following build error:

<--  snip  -->

...
  MODPOST 61 modules
ERROR: "copy_page" [fs/fuse/fuse.ko] undefined!
...
make[2]: *** [__modpost] Error 1

<--  snip  -->

Also add an empty line since *_page aren't "String functions".

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-05-26 13:26:36 +02:00
Jan Beulich 6360b1fbb4 move BUG_TABLE into RODATA
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-25 07:06:08 +02:00