Commit Graph

409 Commits

Author SHA1 Message Date
David Woodhouse d1da4e50e5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/mtd/Kconfig

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-27 19:16:19 +01:00
Artem Bityutskiy 0029da3bf4 JFFS2: add UBI support
This patch make JFFS2 able to work with UBI volumes via the emulated MTD
devices which are directly mapped to these volumes.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-04-27 14:24:08 +03:00
Andrew Morton f6449f4ece [JFFS2] Fix compr_rubin.c build after include file elimination.
It seems to be silly season lately.

(Oops, test builds are more useful if the file in question is actually
configured on. dwmw2).

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-26 07:27:04 +01:00
David Woodhouse 61c4b23770 [JFFS2] Handle inodes with only a single metadata node with non-zero isize
This should never happen unless there's corruption on the medium and the
actual data nodes go missing. But the failure mode (an oops when we assume
the fragtree isn't empty and go looking for its last node) isn't useful.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 17:04:23 +01:00
David Woodhouse c00c310eac [JFFS2] Tidy up licensing/copyright boilerplate.
In particular, remove the bit in the LICENCE file about contacting
Red Hat for alternative arrangements. Their errant IS department broke
that arrangement a long time ago -- the policy of collecting copyright
assignments from contributors came to an end when the plug was pulled on
the servers hosting the project, without notice or reason.

We do still dual-license it for use with eCos, with the GPL+exception
licence approved by the FSF as being GPL-compatible. It's just that nobody
has the right to license it differently.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 14:16:47 +01:00
Joakim Tjernlund 0dec4c8bc6 [JFFS2] Better fix for all-zero node headers
No need to check for all-zero header since the header cannot
be zero due to other checks.

Replace the all-zero header check in readinode.c with a
check for the magic word.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 04:13:06 +01:00
David Woodhouse df8e96f391 [JFFS2] Improve read_inode memory usage, v2.
We originally used to read every node and allocate a jffs2_tmp_dnode_info
structure for each, before processing them in (reverse) version order
and discarding the ones which are obsoleted by later nodes.

With huge logfiles, this behaviour caused memory problems. For example, a
file involved in OLPC trac #1292 has 1822391 nodes, and would cause the XO
machine to run out of memory during the first stage of read_inode().

Instead of just inserting nodes into a tree in version order as we find
them, we now put them into a tree in order of their offset within the
file, which allows us to immediately discard nodes which are completely
obsoleted.

We don't use a full tree with 'fragments' pointing to the real data
structure, as we do in the normal fragtree. We sort only on the start
address, and add an 'overlapped' flag to the tmp_dnode_info to indicate
that the node in question is (partially) overlapped by another.

When the scan is complete, we start at the end of the file, adding each
node to a real fragtree as before. Where the node is non-overlapped, we
just add it (it doesn't matter that it's not the latest version; there is
no overlap). When the node at the end of the tree _is_ overlapped, we sort
it and all its overlapping nodes into version order and then add them to
the fragtree in that order.

This 'early discard' reduces the peak allocation of tmp_dnode_info
structures from 1.8M to a mere 62872 (3.5%) in the degenerate case
referenced above.

This version of the patch also correctly rememembers the highest node
version# seen for an inode when it's scanned.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-25 03:23:42 +01:00
David Woodhouse 44b998e1eb [JFFS2] Improve failure mode if inode checking leaves unchecked space.
We should never find the unchecked size is non-zero after we've finished
checking all inodes. If it happens, used to BUG(), leaving the alloc_sem
held and deadlocking. Instead, just return -ENOSPC after complaining. The
GC thread will die, but read-only operation should be able to continue and
the file system should be unmountable.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-23 12:11:46 +01:00
David Woodhouse 566865a2a4 [JFFS2] Fix cross-endian build.
When compiling a LE-capable JFFS2 on PowerPC, wbuf.c fails to compile:

fs/jffs2/wbuf.c:973: error: braced-group within expression allowed only inside a function
fs/jffs2/wbuf.c:973: error: initializer element is not constant
fs/jffs2/wbuf.c:973: error: (near initialization for ‘oob_cleanmarker.magic’)
fs/jffs2/wbuf.c:974: error: braced-group within expression allowed only inside a function
fs/jffs2/wbuf.c:974: error: initializer element is not constant
fs/jffs2/wbuf.c:974: error: (near initialization for ‘oob_cleanmarker.nodetype’)
fs/jffs2/wbuf.c:975: error: braced-group within expression allowed only inside a function
fs/jffs2/wbuf.c:976: error: initializer element is not constant
fs/jffs2/wbuf.c:976: error: (near initialization for ‘oob_cleanmarker.totlen’)

Provide constant_cpu_to_je{16,32} functions, and use them for initialising the
offending structure.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-23 12:07:17 +01:00
Joakim Tjernlund a491486a20 [JFFS2] Obsolete dirent nodes immediately on unlink, where possible.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-20 23:09:28 -04:00
Joakim Tjernlund c2aecda79c [JFFS2] Speed up mount for directly-mapped NOR flash
Remove excessive scanning of empty flash after a clean
marker for users of the point/unpoint method. cfi_cmdset_0001
uses point/unpoint by default iff flash mapping is linear.
The speedup is several orders of magnitude if FS is less than
half full.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 14:07:34 -04:00
Artem Bityutskiy 10731f8300 [JFFS2] fix buffer sise calculations in jffs2_get_inode_nodes()
In read inode we have an optimization which prevents one
min. I/O unit (e.g. NAND page) to be read more then once.

Namely, at the beginning we do not know which node type we read,
so we read so we assume we read the directory entry, because it
has the smallest node header. When we read it, we read up to the
next min. I/O unit, just because if later we'll need to read more,
we already have this data.

If it turns out to be that the node is not directory entry, and
we need more data, and we did not read it because it sits in the
next min. I/O unit, we read the whole next (or several next)
min. I/O unit(s). And if it happens to be that we read a data node,
and we've read part of its data, we calculate partial CRC.
So if later we need to check data CRC, we'll only read the rest
of the data from further min. I/O units and continue CRC checking.

This code was a bit messy and buggy. The bug was that it assumed
relatively large min. I/O unit, so that the largest node header
could overlap only one min. I/O unit boundary.

This parch clean-ups the code a bit and fixes this bug.
The patch was not tested on flash with small min. I/O unit, like
NOR-ECC, nut it was tested on NAND with 512 bytes NAND page, so
it at least does not break NAND. It was also tested with mtdram
so it should not break NOR.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 14:05:48 -04:00
Adrian Hunter 7f762ab24c [JFFS2] Disable summary after wbuf recovery
After a write error, any data in the write buffer must
be relocated.  This is handled by the jffs2_wbuf_recover
function.  This function does not fix up the erase block
summary information that is collected for writing at the
end of the block, which results in an incorrect summary
(or BUG if the summary was found to be empty).

As the summary is not essential (it is an optimisation),
it may be disabled for the current erase block when this
situation arises.  This patch does that.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:56:44 -04:00
Adrian Hunter 99c2594f0e [JFFS2] Prevent list corruption when handling write errors
If a write error occurs, the affected block is placed on the
bad_used_list.  In the case that the write error occured
when writing summary data the block was also being placed on
the dirty_list, which caused list corruption and ultimately
a soft lockup in jffs2_mark_node_obsolete. This fixes that.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:56:23 -04:00
Artem Bityutskiy b0afbbec49 [JFFS2] fix deadlock on error path
When the MTD driver returns write failure, the following deadlock
occurs:

We are in __jffs2_flush_wbuf(), we hold &c->wbuf_sem. Write failure.
jffs2_wbuf_recover()->jffs2_reserve_space_gc()->jffs2_do_reserve_space()
->jffs2_erase_pending_blocks()->jffs2_flash_read()

and it tries to lock &c->wbuf_sem again. Deadlock.

Reported-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 13:53:51 -04:00
Thomas Gleixner 53043002ef [JFFS2] check node crc before doing anything else
Check the node CRC on scan before doing anything else with the node.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-17 18:26:18 +01:00
Robert P. J. Day 8dc64fca75 [JFFS2] Delete everything related to obsolete JFFS2_PROC option
Delete everything related to the apparently non-existent kernel config
option JFFS2_PROC.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-04-02 14:11:25 -04:00
Robert P. J. Day 3a6effe81f [JFFS2] Remove superfluous source file fs/jffs2/comprtest.c
Delete the obsolete source file fs/jffs2/comprtest.c.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-10 10:16:36 +01:00
Artem Bityutskiy 0feba829ee [JFFS2] print a message when marking bad block
New bad eraseblock is an event which is important enough to be printed
about.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 12:29:39 +00:00
David Woodhouse c7258a4477 [JFFS2] Check for all-zero node headers
Due to a poor choice of CRC32 seed, a node header which is all zeroes
would pass the CRC32 check. Explicitly check for this case, and treat it
as we do a CRC failure.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-09 11:44:00 +00:00
David Woodhouse f8a922c7bb [JFFS2] Use yield() between GC passes in background thread.
The garbage collection thread is strictly an optimisation. Everything it
does would also be done just-in-time in the context of something in
userspace trying to access the file system.

Sometimes, however, it's a pessimisation. Especially during early boot
when it's checksumming nodes and scanning inodes which are shortly going
to be pulled in by read_inode anyway. We end up building the rbtree of
node coverage twice for the same inode.

By switching to yield() instead of cond_resched() in the main loop, we
observe boot times on the OLPC system going down from about 100 seconds to
60.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 10:28:30 +00:00
Vitaly Wool 180bfb31fe [JFFS2] Fix writebuffer recovery in the first page of a block
For the case when nand_write_page fail with -EIO for the first page in an
eraseblock, jffs2_wbuf_recover ends up producing a BUG in jffs2_block_refile
as jeb->first_node is not yet set up (it's set up later in jffs2_wbuf_recover).
This BUG is not really a bug; it's just jffs2_wbuf_recover calling
jffs2_block_refile with the wrong second parameter.
This patch takes care of this situation.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-03-08 09:18:31 +00:00
Linus Torvalds 4935361766 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (49 commits)
  [MTD] [NAND] S3C2412 fix hw ecc
  [MTD] [NAND] Work around false compiler warning in CAFÉ driver
  [JFFS2] printk warning fixes
  [MTD] [MAPS] ichxrom warning fix
  [MTD] [MAPS] amd76xrom warning fix
  [MTD] [MAPS] esb2rom warning fixes
  [MTD] [MAPS] ck804xrom warning fix
  [MTD] [MAPS] netsc520 warning fix
  [MTD] [MAPS] sc520cdp warning fix
  [MTD] [ONENAND] onenand_base warning fix
  [MTD] [NAND] eXcite nand flash driver
  [MTD] Improve heuristic for detecting wrong-endian RedBoot partition table
  [MTD] Fix RedBoot partition parsing regression harder.
  [MTD] [NAND] S3C2410: Hardware ECC correction code
  [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
  [MTD] Clarify OOB-operation interface comments
  [MTD] remove unused ecctype,eccsize fields from struct mtd_info
  [MTD] [NOR] Intel: remove ugly PROGREGION macros
  [MTD] [NOR] STAA: use writesize instead off eccsize to represent ECC block
  [MTD] OneNAND: Invalidate bufferRAM after erase
  ...
2007-02-19 13:34:11 -08:00
Andrew Morton 7be26bfb2e [JFFS2] printk warning fixes
fs/jffs2/wbuf.c: In function 'jffs2_check_oob_empty':
fs/jffs2/wbuf.c:993: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
fs/jffs2/wbuf.c:993: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
fs/jffs2/wbuf.c: In function 'jffs2_check_nand_cleanmarker':
fs/jffs2/wbuf.c:1036: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
fs/jffs2/wbuf.c:1036: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'
fs/jffs2/wbuf.c: In function 'jffs2_write_nand_cleanmarker':
fs/jffs2/wbuf.c:1062: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'
fs/jffs2/wbuf.c:1062: warning: format '%d' expects type 'int', but argument 4 has type 'size_t'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-18 16:43:14 +00:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Josef 'Jeff' Sipek ee9b6d61a2 [PATCH] Mark struct super_operations const
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".

Compile tested with gcc & sparse.

Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:47 -08:00
Arjan van de Ven 92e1d5be91 [PATCH] mark struct inode_operations const 2
Many struct inode_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:46 -08:00
Artem Bityutskiy a7a6ace140 [JFFS2] Use MTD_OOB_AUTO to automatically place cleanmarker on NAND
Nowadays MTD supports an MTD_OOB_AUTO option which allows users
to access free bytes in NAND's OOB as a contiguous buffer, although
it may be highly discontinuous.

This patch teaches JFFS2 to use this nice feature instead of the
old MTD_OOB_PLACE option. This for example caused problems with
OneNAND. Now JFFS2 does not care how are the free bytes situated.

This may change position of the clean marker on some flashes,
but this is not a problem. JFFS2 will just re-erase the empty
eraseblocks and write the new (correct) clean marker.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-09 15:34:08 +00:00
Dmitry Adamushko cfa72397cf JFFS2: memory leak in jffs2_do_mount_fs()
If  jffs2_sum_init()  fails,  c->blocks is not freed neither in
jffs2_do_mount_fs() nor in jffs2_do_fill_super().

Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-02-09 15:00:21 +00:00
David Woodhouse 9cdf083f98 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2007-01-18 10:34:51 +11:00
David Woodhouse e499e01d23 [JFFS2] debug.h: include <linux/sched.h> for current->pid
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-01-13 08:19:03 +08:00
Kyungmin Park abb536e7ac [JFFS2] use the ref_offset macro
Don't use ref->flash_offset directly in debugging code, use the ref_offset macro instead.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-01-10 14:03:20 +02:00
Artem Bityutskiy a2166b933e [JFFS2] Reschedule in loops
Make JFFS2 nicer and teach it to call cond_resched() in loops
which may be quite large.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2007-01-10 14:01:00 +02:00
Amit Choudhary 85de3d9bc7 [JFFS2] Fix error-path leak in summary scan
Signed-off-by: Amit Choudhary <amit2030@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-01-02 21:16:10 +00:00
Artem Bityutskiy aba54da3d0 [JFFS2] add cond_resched() when garbage collecting deletion dirent
We observe soft lockups when doing heavy test which creates
directory with a lot of direntries and deletes them. This
cycle is the reason fo this. Make it nicer and add cond_resched()
inside of it.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-19 14:20:16 +00:00
Yan Burman 3d375d9e0f [JFFS2] replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-12-10 11:50:34 +00:00
Josef Sipek ec2e203c82 [PATCH] struct path: convert jffs2
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 08:28:46 -08:00
Nigel Cunningham 7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00
Christoph Lameter e18b890bb0 [PATCH] slab: remove kmem_cache_t
Replace all uses of kmem_cache_t with struct kmem_cache.

The patch was generated using the following script:

	#!/bin/sh
	#
	# Replace one string by another in all the kernel sources.
	#

	set -e

	for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
		quilt add $file
		sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
		mv /tmp/$$ $file
		quilt refresh
	done

The script was run like this

	sh replace kmem_cache_t "struct kmem_cache"

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:25 -08:00
Christoph Lameter e94b176609 [PATCH] slab: remove SLAB_KERNEL
SLAB_KERNEL is an alias of GFP_KERNEL.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:24 -08:00
Al Viro 914e26379d [PATCH] severing fs.h, radix-tree.h -> sched.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-12-04 02:00:24 -05:00
Artem Bityutskiy 9c74034f8f [MTD] return error code from get_mtd_device()
get_mtd_device() returns NULL in case of any failure. Teach it to return an
error code instead. Fix all users as well.

Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
2006-11-29 17:06:38 +02:00
Vitaly Wool 7014568bad [MTD] [NAND] remove len/ooblen confusion.
As was discussed between Ricard Wanderlöf, David Woodhouse, Artem 
Bityutskiy and me, the current API for reading/writing OOB is confusing. 

The thing that introduces confusion is the need to specify ops.len 
together with ops.ooblen for reads/writes that concern only OOB not data 
area. So, ops.len is overloaded: when ops.datbuf != NULL it serves to 
specify the length of the data read, and when ops.datbuf == NULL, it 
serves to specify the full OOB read length.

The patch inlined below is the slightly updated version of the previous 
patch serving the same purpose, but with the new Artem's comments taken 
into account.

Artem, BTW, thanks a lot for your valuable input!

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-11-28 22:39:03 +00:00
David Woodhouse 513b046c96 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2006-10-21 16:46:04 +01:00
Qi Yong c7cf0c68ea [JFFS2] Fix jffs2_follow_link() typo
typo fix: noticed this typo while reading the patch
"jffs2: fix symlink error handling"

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 16:24:08 +01:00
Akinobu Mita ea7415cca9 [JFFS2] Use rb_first() and rb_last() cleanup
Use rb_first() and rb_last() to implement frag_first() and frag_last().

Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-21 16:21:40 +01:00
Alexey Dobriyan 2ecd05ae68 [PATCH] fs/*: use BUILD_BUG_ON
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:23 -07:00
Jeff Garzik a6b1d82d07 [JFFS2] kill warning RE debug-only variables
gcc emits the following warning on a 'allmodconfig' build:

fs/jffs2/xattr.c: In function ‘unrefer_xattr_datum’:
fs/jffs2/xattr.c:402: warning: unused variable ‘version’
fs/jffs2/xattr.c:402: warning: unused variable ‘xid’

Given that these variables are only used in the debug printk, and they
merely remove a deref, we can easily kill the warning by adding the
derefs to the debug printk.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-10-04 14:31:01 +01:00
Dave Hansen d8c76e6f45 [PATCH] r/o bind mount prepwork: inc_nlink() helper
This is mostly included for parity with dec_nlink(), where we will have some
more hooks.  This one should stay pretty darn straightforward for now.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:30 -07:00
Dave Hansen 9a53c3a783 [PATCH] r/o bind mounts: unlink: monitor i_nlink
When a filesystem decrements i_nlink to zero, it means that a write must be
performed in order to drop the inode from the filesystem.

We're shortly going to have keep filesystems from being remounted r/o between
the time that this i_nlink decrement and that write occurs.

So, add a little helper function to do the decrements.  We'll tie into it in a
bit to note when i_nlink hits zero.

Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:30 -07:00
Badari Pulavarty 543ade1fc9 [PATCH] Streamline generic_file_* interfaces and filemap cleanups
This patch cleans up generic_file_*_read/write() interfaces.  Christoph
Hellwig gave me the idea for this clean ups.

In a nutshell, all filesystems should set .aio_read/.aio_write methods and use
do_sync_read/ do_sync_write() as their .read/.write methods.  This allows us
to cleanup all variants of generic_file_* routines.

Final available interfaces:

generic_file_aio_read() - read handler
generic_file_aio_write() - write handler
generic_file_aio_write_nolock() - no lock write handler

__generic_file_aio_write_nolock() - internal worker routine

Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:28 -07:00
Theodore Ts'o ba52de123d [PATCH] inode-diet: Eliminate i_blksize from the inode structure
This eliminates the i_blksize field from struct inode.  Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.

Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.

[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:18 -07:00
Panagiotis Issaris f8314dc60c [PATCH] fs: Conversions from kmalloc+memset to k(z|c)alloc
Conversions from kmalloc+memset to kzalloc.

Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-27 08:26:10 -07:00
Michal Piotrowski f2dd117fa5 [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.h
We certainly don't need the check for Linux version > 2.5.2, and in fact
we can also live without the __ECOS check, since we can just add it back
in the eCos git tree which is automatically derived from the Linux fs/jffs2
subdirectory in the upstream git tree.

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-22 10:13:46 +01:00
Havasi Ferenc d882687c51 [JFFS2][SUMMARY] Fix a summary collecting bug.
In some special case (padding because of sync
or umount) it can be possible that summary
information is not fit to the end of the erase
block. In these cases the collecting of summary
is disabled for this erase block.

The problem was that this was not respected
by jffs2_sum_add_kvec(). This patch fix this
bug.

From: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-09-16 09:08:12 +01:00
Adrian Bunk 0b6c0bb3f9 fs/jffs2/xattr.c: remove dead code
This patch removes some obvious dead code spotted by the Coverity
checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2006-08-15 19:10:19 -05:00
Adrian Bunk 90a18fab4a make fs/jffs2/nodelist.c:jffs2_obsolete_node_frag() static
This patch makes the needlessly global jffs2_obsolete_node_frag()
static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-07 00:02:10 +01:00
Linus Torvalds 0d1782144e Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [JFFS2][XATTR] Fix memory leak in POSIX-ACL support
  fs/jffs2/: make 2 functions static
  [MTD] NAND: Fix broken sharpsl driver
  [JFFS2][XATTR] Fix xd->refcnt race condition
  MTD: kernel-doc fixes + additions
  MTD: fix all kernel-doc warnings
  [MTD] DOC: Fixup read functions and do a little cleanup
2006-07-03 21:29:08 -07:00
KaiGai Kohei c7afb0f977 [JFFS2][XATTR] Fix memory leak in POSIX-ACL support
jffs2_clear_acl() which releases acl caches allocated by kmalloc()
was defined but it was never called. Thus, we faced to the risk
of memory leaking.

This patch plugs jffs2_clear_acl() into jffs2_do_clear_inode().
It ensures to release acl cache when inode is cleared.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-07-02 15:13:46 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Adrian Bunk c05d52c748 fs/jffs2/: make 2 functions static
This patch makes two needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-29 23:08:49 +01:00
KaiGai Kohei c6e8c6ccf9 [JFFS2][XATTR] Fix xd->refcnt race condition
When xd->refcnt is checked whether this xdatum should be released
or not, atomic_dec_and_lock() is used to ensure holding the
c->erase_completion_lock.

This fix change a specification of delete_xattr_datum().
Previously, it's only called when xd->refcnt equals zero.
(calling it with positive xd->refcnt cause a BUG())
If you applied this patch, the function checks whether
xd->refcnt is zero or not under the spinlock if necessary.
Then, it marks xd DEAD flahs and links with xattr_dead_list
or releases it immediately when xd->refcnt become zero.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-29 15:33:02 +01:00
Christoph Hellwig f5e54d6e53 [PATCH] mark address_space_operations const
Same as with already do with the file operations: keep them in .rodata and
prevents people from doing runtime patching.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven French <sfrench@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28 14:59:04 -07:00
Linus Torvalds 936813a880 Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [MTD] NAND: Select chip before checking write protect status
  [MTD] CORE mtdchar.c: fix off-by-one error in lseek()
  [MTD] NAND: Fix typo in mtd/nand/ts7250.c
  [JFFS2][XATTR] coexistence between xattr and write buffering support.
  [JFFS2][XATTR] Fix wrong copyright
  [JFFS2][XATTR] Re-define xd->refcnt as atomic_t
  [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref
  [JFFS2][XATTR] rid unnecessary writing of delete marker.
  [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL.
  [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion
  [MTD] Fix off-by-one error in physmap.c
  [MTD] Remove unused 'nr_banks' variable from ixp2000 map driver
  [MTD NAND] s3c2412 support in s3c2410.c
  [MTD] Initialize 'writesize'
  [MTD] NAND: ndfc fix address offset thinko
  [MTD] NAND: S3C2410 convert prinks to dev_*()s
  [MTD] NAND: Missing fixups
2006-06-27 19:13:56 -07:00
KaiGai Kohei 332a6b99c5 [JFFS2][XATTR] Fix wrong copyright
summary.c was modified at 2006.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:19:39 +01:00
KaiGai Kohei 2c887e2359 [JFFS2][XATTR] Re-define xd->refcnt as atomic_t
In jffs2_release_xattr_datum(), it refers xd->refcnt to ensure
whether releasing xd is allowed or not.
But we can't hold xattr_sem since this function is called under
spin_lock(&c->erase_completion_lock). Thus we have to refer it
without any locking.

This patch redefine xd->refcnt as atomic_t. It enables to refer
xd->refcnt without any locking.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:19:06 +01:00
KaiGai Kohei 355ed4e141 [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref
If xattr_ref is associated with an orphan inode_cache
on filesystem mounting, those xattr_refs are not
released even if this inode_cache is released.

This patch enables to call jffs2_xattr_delete_inode()
for such a irregular inode_cachde too.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:18:30 +01:00
KaiGai Kohei 8a13695cbe [JFFS2][XATTR] rid unnecessary writing of delete marker.
In the followinf situation, an explicit delete marker is not
necessary, because we can certainlly detect those obsolete
xattr_datum or xattr_ref on next mounting.

- When to delete xattr_datum node.
- When to delete xattr_ref node on removing inode.
- When to delete xattr_ref node on updating xattr.

This patch rids writing delete marker in those situations.

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:18:02 +01:00
KaiGai Kohei a1ae76e96a [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL.
This patch enable to handle the case when updating null xattr
by null ACL.

When we try to set NULL into NULL xattr, xattr subsystem returns
-ENODATA. This patch enables to handle this error code.

[2/3] jffs2-xattr-v6-02-fix_posixacl_bug.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:17:04 +01:00
KaiGai Kohei c9f700f840 [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion
- When xdatum is removed, a new xdatum with 'delete marker' is
  written. (version==0xffffffff means 'delete marker')
- When xref is removed, a new xref with 'delete marker' is written.
  (odd-numbered xseqno means 'delete marker')

- delete_xattr_(datum/xref)_delay() are new deletion functions
  are added. We can only use them if we can detect the target
  obsolete xdatum/xref as a orphan or errir one.
  (e.g when inode deletion, or detecting crc error)

[1/3] jffs2-xattr-v6-01-delete_marker.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-27 16:16:26 +01:00
Linus Torvalds da206c9e68 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  typo fixes
  Clean up 'inline is not at beginning' warnings for usb storage
  Storage class should be first
  i386: Trivial typo fixes
  ixj: make ixj_set_tone_off() static
  spelling fixes
  fix paniced->panicked typos
  Spelling fixes for Documentation/atomic_ops.txt
  move acknowledgment for Mark Adler to CREDITS
  remove the bouncing email address of David Campbell
2006-06-26 13:33:14 -07:00
Akinobu Mita f116629d03 [PATCH] fs: use list_move()
This patch converts the combination of list_del(A) and list_add(A, B) to
list_move(A, B) under fs/.

Cc: Ian Kent <raven@themaw.net>
Acked-by: Joel Becker <joel.becker@oracle.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Hans Reiser <reiserfs-dev@namesys.com>
Cc: Urban Widmark <urban@teststation.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Akinobu Mita <mita@miraclelinux.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:18 -07:00
Andreas Mohr d6e05edc59 spelling fixes
acquired (aquired)
contiguous (contigious)
successful (succesful, succesfull)
surprise (suprise)
whether (weather)
some other misspellings

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:35:02 +02:00
David Howells 726c334223 [PATCH] VFS: Permit filesystem to perform statfs with a known root dentry
Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
David Howells 454e2398be [PATCH] VFS: Permit filesystem to override root dentry on mount
Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 07:42:45 -07:00
Linus Torvalds 2edc322d42 Merge git://git.infradead.org/~dwmw2/rbtree-2.6
* git://git.infradead.org/~dwmw2/rbtree-2.6:
  [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency
  Update UML kernel/physmem.c to use rb_parent() accessor macro
  [RBTREE] Update hrtimers to use rb_parent() accessor macro.
  [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node.
  [RBTREE] Merge colour and parent fields of struct rb_node.
  [RBTREE] Remove dead code in rb_erase()
  [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
  [RBTREE] Update eventpoll.c to use rb_parent() accessor macro.
  [RBTREE] Update key.c to use rb_parent() accessor macro.
  [RBTREE] Update ext3 to use rb_parent() accessor macro.
  [RBTREE] Change rbtree off-tree marking in I/O schedulers.
  [RBTREE] Add accessor macros for colour and parent fields of rb_node
2006-06-20 14:51:22 -07:00
David Woodhouse 1046d88001 [JFFS2] Check CRC32 on dirent and data nodes each time they're read
Also, make sure dirents are marked REF_UNCHECKED when we 'discover' them
through eraseblock summary.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 22:44:21 +01:00
David Woodhouse fc6612f627 [JFFS2] When retiring nextblock, allocate a node_ref for the wasted space
Failing to do so makes the calculated length of the last node incorrect,
when we're not using eraseblock summaries.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 18:39:38 +01:00
David Woodhouse 3877f0b6c9 [JFFS2] Don't trust node headers before the CRC is checked.
Especially when summary code is used, we can have in-memory data
structures referencing certain nodes without them actually being readable
on the flash. Discard the nodes gracefully in that case, rather than
triggering a BUG().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-18 00:05:26 +01:00
David Woodhouse 4ed0156f77 [JFFS2] Fix more breakage caused by janitorial meddling.
jffs2_zlib_exit() and free_workspaces() shouldn't be marked __exit because
they get called in the error case from the init functions.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-09 15:06:42 +01:00
David Woodhouse 3bcc86f507 [JFFS2] Remove stray __exit from jffs2_compressors_exit()
It's used from the initfunc in case of failure too. We could actually do
with an '__initexit' for this kind of thing -- when built in to the
kernel, it could do with being dropped with the init text. We _could_
actually just use __init for it, but that would break if/when we start
dropping init text from modules. So let's just leave it as it was for now,
and mutter a little more about random 'janitorial' fixes from people who
aren't paying attention to what they're doing.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-06-03 00:25:50 +01:00
David Woodhouse 098a19811b [JFFS2] Preallocate node refs for cleanmarker in summary scan
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-30 09:00:14 +01:00
David Woodhouse 13ba42df4a [JFFS2] Fix calculation of potential summary marker offset on NOR flash.
Helps if we look _inside_ the buffer, rather than adding jeb->offset to
it. Doh.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-30 08:59:34 +01:00
Thomas Gleixner 9a1fcdfd4b [MTD] NAND Signal that a bitflip was corrected by ECC
Return -EUCLEAN on read when a bitflip was detected and corrected, so the
clients can react and eventually copy the affected block to a spare one.
Make all in kernel users aware of the change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner 8593fbc68b [MTD] Rework the out of band handling completely
Hopefully the last iteration on this!

The handling of out of band data on NAND was accompanied by tons of fruitless
discussions and halfarsed patches to make it work for a particular
problem. Sufficiently annoyed by I all those "I know it better" mails and the
resonable amount of discarded "it solves my problem" patches, I finally decided
to go for the big rework. After removing the _ecc variants of mtd read/write
functions the solution to satisfy the various requirements was to refactor the
read/write _oob functions in mtd.

The major change is that read/write_oob now takes a pointer to an operation
descriptor structure "struct mtd_oob_ops".instead of having a function with at
least seven arguments.

read/write_oob which should probably renamed to a more descriptive name, can do
the following tasks:

- read/write out of band data
- read/write data content and out of band data
- read/write raw data content and out of band data (ecc disabled)

struct mtd_oob_ops has a mode field, which determines the oob handling mode.

Aside of the MTD_OOB_RAW mode, which is intended to be especially for
diagnostic purposes and some internal functions e.g. bad block table creation,
the other two modes are for mtd clients:

MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is
described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's
up to the caller to make sure that the byte positions are not used by the ECC
placement algorithms.

MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in
the out of band area which are described by the oobfree tuples in the ecclayout
data structre which is associated to the devicee.

The decision whether data plus oob or oob only handling is done depends on the
setting of the datbuf member of the data structure. When datbuf == NULL then
the internal read/write_oob functions are selected, otherwise the read/write
data routines are invoked.

Tested on a few platforms with all variants. Please be aware of possible
regressions for your particular device / application scenario

Disclaimer: Any whining will be ignored from those who just contributed "hot
air blurb" and never sat down to tackle the underlying problem of the mess in
the NAND driver grown over time and the big chunk of work to fix up the
existing users. The problem was not the holiness of the existing MTD
interfaces. The problems was the lack of time to go for the big overhaul. It's
easy to add more mess to the existing one, but it takes alot of effort to go
for a real solution.

Improvements and bugfixes are welcome!

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:51 +02:00
Thomas Gleixner 5bd34c091a [MTD] NAND Replace oobinfo by ecclayout
The nand_oobinfo structure is not fitting the newer error correction
demands anymore. Replace it by struct nand_ecclayout and fixup the users
all over the place. Keep the nand_oobinfo based ioctl for user space
compability reasons.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:50 +02:00
Thomas Gleixner ff268fb879 [MTD] NAND Consolidate oobinfo handling
The info structure for out of band data was copied into
the mtd structure. Make it a pointer and remove the ability
to set it from userspace. The position of ecc bytes is
defined by the hardware and should not be changed by software.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 15:06:49 +02:00
David Woodhouse a6a8bef722 [JFFS2] Preallocate raw_node_refs in a couple of missing places in scan
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-29 00:41:11 +01:00
David Woodhouse 2ebf09c249 [JFFS2] Fix oops when marking space dirty in scan, but no previous node exists.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-28 22:13:25 +01:00
David Woodhouse ddc58bd65e [JFFS2] Fix wbuf recovery of f->metadata->raw node.
A data node might not be in the fraglist; it could be f->metadata.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-27 13:15:16 +01:00
David Woodhouse 9bfeb691e7 [JFFS2] Switch to using an array of jffs2_raw_node_refs instead of a list.
This allows us to drop another pointer from the struct jffs2_raw_node_ref,
shrinking it to 8 bytes on 32-bit machines (if the TEST_TOTLEN) paranoia
check is turned off, which will be committed soon).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-26 21:19:05 +01:00
David Woodhouse 89291a9d5b [JFFS2] Fix 64-bit size_t problems in XATTR code.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 13:30:24 +01:00
David Woodhouse 8b9e9fe8c6 [JFFS2] Fix and improve debugging output during scan.
Print wasted_size in scanned eraseblocks, print range correctly for
summary dirent and inode entries.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 01:53:09 +01:00
David Woodhouse 046b8b9808 [JFFS2] Add 'jeb' argument to jffs2_prealloc_raw_node_refs()
Preallocation of refs is shortly going to be a per-eraseblock thing,
rather than per-filesystem. Add the required argument to the function.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 01:50:35 +01:00
David Woodhouse f61579c337 [JFFS2] Correctly handle wasted space before summary node.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 01:42:40 +01:00
David Woodhouse c38c1b613d [JFFS2] jffs2_free_all_node_refs() doesn't free them all. Rename it.
... to jffs2_free_jeb_node_refs() since that's what it does.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 01:38:27 +01:00
David Woodhouse f560928baa [JFFS2] Allocate node_ref for wasted space when skipping to page boundary
One more place where we were changing the accounting info without
actually allocating a ref for the lost space...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-25 01:37:28 +01:00
David Woodhouse c7c16c8e76 [JFFS2] Revert Artem's Bunkage in debug messages.
Random unthinking 'cleanup' caused debug messages like this:
   Obsoleting node at 0x0006daf4 of len 0x3a4: <7>Dirtying

If messages are continuation of an existing line, they don't need
to be prefixed with KERN_DEBUG.

THINK. Or you will be replaced by a small shell script.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 14:24:02 +01:00
David Woodhouse 0305c8659f Merge branch 'master' of git://git.infradead.org/~gleixner/mtd-nand-2.6.git 2006-05-24 10:01:43 +01:00
David Woodhouse 99988f7bbd [JFFS2] Introduce ref_next() macro for finding next physical node
Another part of the preparation for switching to an array...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 09:04:17 +01:00
David Woodhouse 2f785402f3 [JFFS2] Reduce visibility of raw_node_ref to upper layers of JFFS2 code.
As the first step towards eliminating the ref->next_phys member and saving
memory by using an _array_ of struct jffs2_raw_node_ref per eraseblock,
stop the write functions from allocating their own refs; have them just
_reserve_ the appropriate number instead. Then jffs2_link_node_ref() can
just fill them in.

Use a linked list of pre-allocated refs in the superblock, for now. Once
we switch to an array, it'll just be a case of extending that array.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-24 02:04:45 +01:00
Thomas Gleixner 9223a456da [MTD] Remove read/write _ecc variants
MTD clients are agnostic of FLASH which needs ECC suppport.
Remove the functions and fixup the callers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 17:21:03 +02:00
Thomas Gleixner 4cbb9b80e1 Merge branch 'master' of /home/tglx/work/kernel/git/mtd-2.6/
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 12:37:31 +02:00
Thomas Gleixner dcb0932884 [JFFS2] Simplify writebuffer handling
The writev based write buffer implementation was far to complex as
in most use cases the write buffer had to be handled anyway.
Simplify the write buffer handling and use mtd->write instead.

From extensive testing no performance impact has been noted.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-23 11:49:14 +02:00
David Woodhouse 9fe4854cd1 [JFFS2] Remove flash offset argument from various functions.
We don't need the upper layers to deal with the physical offset. It's
_always_ c->nextblock->offset + c->sector_size - c->nextblock->free_size
so we might as well just let the actual write functions deal with that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-23 00:38:06 +01:00
Joern Engel 5fa433942b [MTD] Introduce MTD_BIT_WRITEABLE
o Add a flag MTD_BIT_WRITEABLE for devices that allow single bits to be
  cleared.
o Replace MTD_PROGRAM_REGIONS with a cleared MTD_BIT_WRITEABLE flag for
  STMicro and Intel Sibley flashes with internal ECC.  Those flashes
  disallow clearing of single bits, unlike regular NOR flashes, so the
  new flag models their behaviour better.
o Remove MTD_ECC.  After the STMicro/Sibley merge, this flag is only set
  and never checked.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:29 +02:00
Joern Engel c8b229de2b [MTD] Merge STMicro NOR_ECC code with Intel Sibley code
In 2002, STMicro started producing NOR flashes with internal ECC protection
for small blocks (8 or 16 bytes).  Support for those flashes was added by me.
In 2005, Intel Sibley flashes copied this strategy and Nico added support for
those.  Merge the code for both.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:12 +02:00
Joern Engel 28318776a8 [MTD] Introduce writesize
At least two flashes exists that have the concept of a minimum write unit,
similar to NAND pages, but no other NAND characteristics.  Therefore, rename
the minimum write unit to "writesize" for all flashes, including NAND.

Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
2006-05-22 23:18:05 +02:00
David Woodhouse 987d47b71a [JFFS2] Put list of nodes in common part of ic/x_ref/x_datum structure
We'll be using a proper list of nodes in the jffs2_xattr_datum and
jffs2_xattr_ref structures, because the existing code to overwrite
them is just broken. Put it in the common part at the front of the
structure which is shared with the jffs2_inode_cache, so that the
jffs2_link_node_ref() function can do the right thing.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 16:32:05 +01:00
David Woodhouse 0eac940b8a [JFFS2] Add some preemptive BUG checks for XATTR code
In a couple of places, we assume that what's at the end of the
->next_in_ino list is a struct jffs2_inode_cache. Let's check
for that, since we expect it to change soon.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 16:29:23 +01:00
David Woodhouse fcb7578719 [JFFS2] Extend jffs2_link_node_ref() to link into per-inode list too.
Let's avoid the potential for forgetting to set ref->next_in_ino, by doing
it within jffs2_link_node_ref() instead.

This highlights the ugliness of what we're currently doing with
xattr_datum and xattr_ref structures -- we should find a nicer way of
dealing with that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 15:23:10 +01:00
David Woodhouse a1b563d652 [JFFS2] Initialise ref->next_in_ino when marking dirty space in wbuf flush
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 13:55:46 +01:00
David Woodhouse 3b79673cfa [JFFS2] Fix accounting error in jffs2_link_node_ref()
When filing REF_OBSOLETE nodes, we'd add their size to the global
'dirty_size' count, but then to the eraseblock's 'used_size' count.
That's not clever.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 12:15:47 +01:00
David Woodhouse 06c6764b58 [JFFS2] Fix dummy jffs2_sum_scan_sumnode() macro for !SUMMARY case.
I added an argument to the real function...

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-22 11:27:14 +01:00
David Woodhouse ca89a517fa [JFFS2] Finally eliminate __totlen field from struct jffs2_raw_node_ref
Well, almost. We'll actually keep a 'TEST_TOTLEN' macro set for now, and keep
doing some paranoia checks to make sure it's all working correctly. But if
TEST_TOTLEN is unset, the size of struct jffs2_raw_node_ref drops from 16
bytes to 12 on 32-bit machines. That's a saving of about half a megabyte of
memory on the OLPC prototype board, with 125K or so nodes in its 512MiB of
flash.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:29:11 +01:00
David Woodhouse 010b06d6d0 [JFFS2] Locking issues in summary write code.
We can't use jffs2_scan_dirty_space() because it doesn't do any locking; it's
only for use at scan time -- hence the 'scan' in the name.

Also, don't allocate refs while we have c->erase_completion_lock held.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:15:59 +01:00
David Woodhouse 9167e0f811 [JFFS2] Remove stray kfree of summary info in XATTR code.
We don't allocate this locally any more -- it's given to us and owner by
our caller. Also improve the debug messages a little.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:13:45 +01:00
David Woodhouse 0bcc099d6d [JFFS2] File node reference for wasted space when flushing wbuf
Next step in ongoing campaign to file a struct jffs2_raw_node_ref for every
piece of dirty space in the system, so that __totlen can be killed off....

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 13:00:54 +01:00
David Woodhouse b64335f2b7 [JFFS2] Add length argument to jffs2_add_physical_node_ref()
If __totlen is going away, we need to pass the length in separately.
Also stop callers from needlessly setting ref->next_phys to NULL,
since that's done for them... and since that'll also be going away soon.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 04:36:45 +01:00
David Woodhouse 49f11d4075 [JFFS2] Mark gaps in summary list as dirty space
Make sure we allocate a ref for any dirty space which exists between nodes
which we find in an eraseblock summary.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 04:00:01 +01:00
David Woodhouse 25090a6b23 [JFFS2] Discard remaining free space when filing a dirty block in scan.
The incoming ref_totlen() calculation is going to rely on the existence
of nodes which cover all dirty space. We can't just tweak the accounting
data any more; we have to call jffs2_scan_dirty_space() to do it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:57:56 +01:00
David Woodhouse 68270995f2 [JFFS2] Introduce jffs2_scan_dirty_space() function.
To eliminate the __totlen field from struct jffs2_raw_node_ref, we need
to allocate nodes for dirty space instead of just tweaking the accounting
data. Introduce jffs2_scan_dirty_space() in preparation for that.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:46:05 +01:00
David Woodhouse 7807ef7ba2 [JFFS2] Fix summary handling of unknown but compatible nodes.
For RWCOMPAT and ROCOMPAT nodes, we should still allow the mount to
succeed. Just abandon the summary and fall through to the full scan.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 03:45:27 +01:00
David Woodhouse 3560160aa2 [JFFS2] Fix memory leak in scan code; improve comments.
If we had to allocate extra space for the summary node, we weren't
correctly freeing it when jffs2_sum_scan_sumnode() returned nonzero --
which is both the success and the failure case. Only when it returned
zero, which means fall through to the full scan, were we correctly freeing
the buffer.

Document the meaning of those return codes while we're at it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 01:28:05 +01:00
David Woodhouse 6171586a7a [JFFS2] Correct handling of JFFS2_FEATURE_RWCOMPAT_COPY nodes.
We should preserve these when we come to garbage collect them, not let
them get erased. Use jffs2_garbage_collect_pristine() for this, and make
sure the summary code copes -- just refrain from writing a summary for any
block which contains a node we don't understand.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-21 00:02:06 +01:00
David Woodhouse fb9fbbcc93 [JFFS2] Correct accounting of erroneous cleanmarkers and failed summaries.
It should all be counted as dirty space, not wasted and _definitely_ not
unchecked.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 20:08:42 +01:00
David Woodhouse f1f9671bd8 [JFFS2] Introduce jffs2_link_node_ref() function to reduce code duplication
The same sequence of code was repeated in many places, to add a new
struct jffs2_raw_node_ref to an eraseblock and adjust the space accounting
accordingly. Move it out-of-line.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 19:45:26 +01:00
David Woodhouse 0cfc7da3ff Merge git://git.infradead.org/jffs2-xattr-2.6
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 17:27:32 +01:00
David Woodhouse 1417fc44ee [JFFS2] Reduce calls to ref_totlen() in jffs2_mark_node_obsolete()
We were calling ref_totlen() 18 times. Even before that becomes a real
function rather than just a dereference, apparently some compilers still
suck anyway. It'll _certainly_ suck after ref_totlen() becomes more
complicated, so calculate it once and don't rely on CSE.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 16:20:19 +01:00
David Woodhouse 9641b784ff [JFFS2] Optimise reading of eraseblock summary nodes
This improves the time to mount 512MiB of NAND flash on my OLPC prototype
by about 4%. We used to read the last page of the eraseblock twice -- once
to find the offset of the summary node, and again to actually _read_ the
summary node. Now we read the last page only once, and read more only if
we need to.

We also don't allocate a new buffer just for the summary code -- we use
the buffer which was already allocated for the scan. Better still, if the
'buffer' for the scan is actually just a pointer directly into NOR flash,
we use that too, avoiding the memcpy() which we used to do.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-20 16:13:34 +01:00
Ferenc Havasi 8e4482fba2 [JFFS2] Remove forgotten summary code
Remove forgotten lines from jffs2_scan_eraseblock() which
were unnecessary and may cause problem in some environments.

Thanks to Alexander Belyakov <alexander.belyakov@intel.com>.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-19 21:00:36 +01:00
David Woodhouse aef9ab4784 [JFFS2] Support new device nodes
Device node major/minor numbers are just stored in the payload of a single
data node. Just extend that to 4 bytes and use new_encode_dev() for it.

We only use the 4-byte format if we _need_ to, if !old_valid_dev(foo).
This preserves backwards compatibility with older code as much as
possible. If we do make devices with major or minor numbers above 255, and
then mount the file system with the old code, it'll just read the first
two bytes and get the numbers wrong. If it comes to garbage-collect it,
it'll then write back those wrong numbers. But that's about the best we
can expect.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-19 00:28:49 +01:00
KaiGai Kohei 20a92fc74c Merge git://git.infradead.org/mtd-2.6 2006-05-19 00:43:53 +09:00
David Woodhouse c41ff6e5f3 [JFFS2] Fix printk format in jffs2_sum_write_data() error message.
fs/jffs2/summary.c: In function ‘jffs2_sum_write_data’:
fs/jffs2/summary.c:658: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘uint32_t’

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 17:05:33 +01:00
David Brownell 7d2beb1359 [JFFS2] Fix section mismatch warnings in JFFS2.
Mark certain functions with __init and __exit appropriately.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-16 16:08:10 +01:00
Florin Malita 5b5ffbc1e6 [PATCH] jffs2: memory leak in jffs2_scan_medium()
If jffs2_scan_eraseblock() fails and the exit path is taken, 's' is not
being deallocated.

Reported by Coverity, CID: 1258.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-15 23:42:31 +01:00
Andrew Morton 184f565210 [JFFS2] Fix printk format in some error messages.
fs/jffs2/nodelist.c: In function `check_node_data':
fs/jffs2/nodelist.c:441: warning: unsigned int format, different type arg (arg 4)
fs/jffs2/nodelist.c:464: warning: int format, different type arg (arg 5)

Modified from Andrew's original fix because while his terminal may indeed
only have eighty columns, mine only has _TWENTYFOUR_ lines. So the
cosmetic fluff is perfectly OK out past column 80 where it was -- the
casual reader doesn't _care_ about anything more than the fact that it
goes 'if (foo) JFFS2_WARNING...', and there's no point wasting a whole
line to display the tail end of the printk which nobody actually cares
about.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-15 13:45:58 +01:00
David Woodhouse 3e68fbb59b [JFFS2] Don't pack on-medium structures, because GCC emits crappy code
If we use __attribute__((packed)), GCC will _also_ assume that the
structures aren't sensibly aligned, and it'll emit code to cope with
that instead of straight word load/save. This can be _very_ suboptimal
on architectures like ARM.

Ideally, we want an attribute which just tells GCC not to do any
padding, without the alignment side-effects. In the absense of that,
we'll just drop the 'packed' attribute and hope that everything stays as
it was (which to be fair is fairly much what we expect). And add some
paranoia checks in the initialisation code, which should be optimised
away completely in the normal case.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-15 00:49:43 +01:00
David Woodhouse cf5eba5334 [JFFS2] Reduce excessive node count for syslog files.
We currently get fairly poor behaviour with files which get many short
writes, such as system logs. This is because we end up with many tiny
data nodes, and the rbtree gets massive. None of these nodes are
actually obsolete, so they are counted as 'clean' space. Eraseblocks can
be entirely full of these nodes (which are REF_NORMAL instead of
REF_PRISTINE), and still they count entirely towards 'used_size' and the
eraseblocks can sit on the clean_list for a long time without being
picked for GC.

One way to alleviate this in the long term is to account REF_NORMAL
space separately from REF_PRISTINE space, rather than counting them both
towards used_size. Then these eraseblocks can be picked for GC and the
offending nodes will be garbage collected.

The short-term fix, though -- which probably makes sense even if we do
eventually implement the above -- is to merge these nodes as they're
written. When we write the last byte in a page, write the _whole_ page.
This obsoletes the earlier nodes in the page _immediately_ and we don't
even need to wait for the garbage collection to do it.

Original implementation from Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-14 04:06:24 +01:00
KaiGai Kohei 21b9879bf2 [JFFS2][XATTR] Fix obvious typo
[2/2] jffs2-xattr-v5.2-02-fix_obvious_typo.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:22:29 +09:00
KaiGai Kohei c8708a9275 [JFFS2][XATTR] Handling the duplicate JFFS2_NODETYPE_XATTR node cases.
When jffs2_sum_process_sum_data() found a JFFS2_NODETYPE_XATTR
which has duplicate xid and older version, an error was returned
without appropriate process.
In the result, mounting filesystem is failed.

This patch fix this problem. If jffs2_setup_xattr_datum() returned
-EEXIST, the caller marks this node as DIRTY_SPACE().

[1/2] jffs2-xattr-v5.2-01-fix-duplicate-xdatum.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:21:38 +09:00
KaiGai Kohei dea80134dc [JFFS2][XATTR] remove redundant pointer cast in acl.c
remove redundant pointer cast in acl.c.

[10/10] jffs2-xattr-v5.1-10-remove_pointer_cast.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:20:24 +09:00
KaiGai Kohei 5a14959c07 [JFFS2][XATTR] remove '__KERNEL__' from acl.h
[9/10] jffs2-xattr-v5.1-09-remove__KERNEL__.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:19:36 +09:00
KaiGai Kohei ee886b5df1 [JFFS2][XATTR] remove senseless comment
remove senseless comment.

[8/10] jffs2-xattr-v5.1-08-remove_senseless_comment.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:19:03 +09:00
KaiGai Kohei 652ecc20d1 [JFFS2][XATTR] Unify each file header part with any jffs2 file.
Unify each file header part with any jffs2 file.

[7/10] jffs2-xattr-v5.1-07-unify_file_header.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:18:27 +09:00
KaiGai Kohei 4470d0409b [JFFS2][XATTR] '#include <linux/list.h>' was added into xattr.h.
'#include <linux/list.h>' was added into xattr.h.
because 'struct list_head' is used in this header file.

[6/10] jffs2-xattr-v5.1-06-add_list.h.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:17:11 +09:00
KaiGai Kohei 084702e001 [JFFS2][XATTR] Remove jffs2_garbage_collect_xattr(c, ic)
Remove jffs2_garbage_collect_xattr(c, ic).
jffs2_garbage_collect_xattr_datum/ref() are called from gc.c directly.

In original implementation, jffs2_garbage_collect_xattr(c, ic) returns
with holding a spinlock if 'ic' is inode_cache. But it returns after
releasing a spinlock if 'ic' is xattr_datum/ref.
It looks so confusable behavior. Thus, this patch makes caller manage
locking/unlocking.

[5/10] jffs2-xattr-v5.1-05-update_xattr_gc.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:16:13 +09:00
KaiGai Kohei 8f2b6f49c6 [JFFS2][XATTR] Remove 'struct list_head ilist' from jffs2_inode_cache.
This patch can reduce 4-byte of memory usage per inode_cache.

[4/10] jffs2-xattr-v5.1-04-remove_ilist_from_ic.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:15:07 +09:00
KaiGai Kohei 8b0b339d46 [JFFS2][XATTR] Add a description about c->xattr_sem
Add a description about the c->xattr_sem read/write semaphore
into README.Locking.

[3/10] jffs2-xattr-v5.1-03-append_README.Locking.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:14:14 +09:00
KaiGai Kohei de1f72fab3 [JFFS2][XATTR] remove typedef from posix_acl related definition.
jffs2_acl_header, jffs2_acl_entry and jffs2_acl_entry_short were redefined
with using 'struct' instead of 'typedef' in kernel implementation.

[1/10] jffs2-xattr-v5.1-01-remove_typedef_kernel.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
2006-05-13 15:13:27 +09:00
KaiGai Kohei aa98d7cf59 [JFFS2][XATTR] XATTR support on JFFS2 (version. 5)
This attached patches provide xattr support including POSIX-ACL and
SELinux support on JFFS2 (version.5).

There are some significant differences from previous version posted
at last December.
The biggest change is addition of EBS(Erase Block Summary) support.
Currently, both kernel and usermode utility (sumtool) can recognize
xattr nodes which have JFFS2_NODETYPE_XATTR/_XREF nodetype.

In addition, some bugs are fixed.
- A potential race condition was fixed.
- Unexpected fail when updating a xattr by same name/value pair was fixed.
- A bug when removing xattr name/value pair was fixed.

The fundamental structures (such as using two new nodetypes and exclusion
mechanism by rwsem) are unchanged. But most of implementation were reviewed
and updated if necessary.
Espacially, we had to change several internal implementations related to
load_xattr_datum() to avoid a potential race condition.

[1/2] xattr_on_jffs2.kernel.version-5.patch
[2/2] xattr_on_jffs2.utils.version-5.patch

Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-13 15:09:47 +09:00
Jesper Juhl 20ffdcb00a [JFFS2] Remove number of pointer dereferences in fs/jffs2/summary.c
Reduce the nr.  of pointer dereferences in fs/jffs2/summary.c

Benefits:
 - micro speed optimization due to fewer pointer derefs
 - generated code is slightly smaller
 - better readability

(The first two sound like a compiler problem but I'll go with the third. dwmw2).

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-12 11:55:51 +01:00
Domen Puncer 7e59f2ccd7 [JFFS2] Remove obsolete histo.h
This file hasn't actually been used since the very early days of JFFS2
when Arjan was playing with compression methods. It can go now.

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-12 11:51:46 +01:00
Dmitry Bazhenov 422138dd68 [JFFS2] Fix race in setting file attributes
It seems like there is a potential race in the function jffs2_do_setattr()
in the case when attributes of a symlink are updated. The symlink metadata
is read without having f->sem locked.

The following patch should fix the race.

Signed-off-by: Dmitry Bazhenov <atrey@emcraft.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-05 22:46:49 +01:00
David Woodhouse cbb9a56177 Move jffs2_fs_i.h and jffs2_fs_sb.h from include/linux/ to fs/jffs2/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-05-03 13:07:27 +01:00
David Woodhouse 21f1d5fc59 [RBTREE] Update JFFS2 to use rb_parent() accessor macro.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-21 13:17:57 +01:00
Richard Purdie 373d5e7183 JFFS2: Return an error for long filenames
Return an error if a name is too long for JFFS2 rather than
corrupting data.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2006-04-18 02:05:46 +01:00
David Woodhouse d96fb997c6 [JFFS2] Fix race in post-mount node checking
For a while now, we've postponed CRC-checking of data nodes to be done
by the GC thread, instead of being done while the user is waiting for
mount to finish. The GC thread would iterate through all the inodes on
the system and check each of their data nodes. It would skip over inodes
which had already been used or were already being read in by
read_inode(), because their data nodes would have been examined anyway.

However, we could sometimes reach the end of the for-each-inode loop and
still have some unchecked space left, if an inode we'd skipped was
_still_ in the process of being read. This fixes that race by actually
waiting for read_inode() to finish rather than just moving on.

Thanks to Ladislav Michl for coming up with a reproducible test case and
helping to track it down.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-17 00:19:48 +01:00
Randy Dunlap fb6a82c94a [PATCH] jffs2: fix printk warnings
Fix printk format warnings in jffs2.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-11 20:12:10 -04:00
Eric Sesterhenn 4b4d1cc733 BUG_ON() Conversion in fs/jffs2/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-01 01:15:35 +02:00
Arjan van de Ven 4b6f5d20b0 [PATCH] Make most file operations structs in fs/ const
This is a conversion to make the various file_operations structs in fs/
const.  Basically a regexp job, with a few manual fixups

The goal is both to increase correctness (harder to accidentally write to
shared datastructures) and reducing the false sharing of cachelines with
things that get dirty in .data (while .rodata is nicely read only and thus
cache clean)

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:06 -08:00
Ingo Molnar 353ab6e97b [PATCH] sem2mutex: fs/
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Eric Van Hensbergen <ericvh@ericvh.myip.org>
Cc: Robert Love <rml@tech9.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 08:56:55 -08:00
Paul Jackson fffb60f93c [PATCH] cpuset memory spread: slab cache format
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD.  This patch
contains only formatting changes, and no function change.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:23 -08:00
Paul Jackson 4b6a9316fa [PATCH] cpuset memory spread: slab cache filesystems
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.

If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.

The following inode and similar caches are marked SLAB_MEM_SPREAD:

    file                               cache
    ====                               =====
    fs/adfs/super.c                    adfs_inode_cache
    fs/affs/super.c                    affs_inode_cache
    fs/befs/linuxvfs.c                 befs_inode_cache
    fs/bfs/inode.c                     bfs_inode_cache
    fs/block_dev.c                     bdev_cache
    fs/cifs/cifsfs.c                   cifs_inode_cache
    fs/coda/inode.c                    coda_inode_cache
    fs/dquot.c                         dquot
    fs/efs/super.c                     efs_inode_cache
    fs/ext2/super.c                    ext2_inode_cache
    fs/ext2/xattr.c (fs/mbcache.c)     ext2_xattr
    fs/ext3/super.c                    ext3_inode_cache
    fs/ext3/xattr.c (fs/mbcache.c)     ext3_xattr
    fs/fat/cache.c                     fat_cache
    fs/fat/inode.c                     fat_inode_cache
    fs/freevxfs/vxfs_super.c           vxfs_inode
    fs/hpfs/super.c                    hpfs_inode_cache
    fs/isofs/inode.c                   isofs_inode_cache
    fs/jffs/inode-v23.c                jffs_fm
    fs/jffs2/super.c                   jffs2_i
    fs/jfs/super.c                     jfs_ip
    fs/minix/inode.c                   minix_inode_cache
    fs/ncpfs/inode.c                   ncp_inode_cache
    fs/nfs/direct.c                    nfs_direct_cache
    fs/nfs/inode.c                     nfs_inode_cache
    fs/ntfs/super.c                    ntfs_big_inode_cache_name
    fs/ntfs/super.c                    ntfs_inode_cache
    fs/ocfs2/dlm/dlmfs.c               dlmfs_inode_cache
    fs/ocfs2/super.c                   ocfs2_inode_cache
    fs/proc/inode.c                    proc_inode_cache
    fs/qnx4/inode.c                    qnx4_inode_cache
    fs/reiserfs/super.c                reiser_inode_cache
    fs/romfs/inode.c                   romfs_inode_cache
    fs/smbfs/inode.c                   smb_inode_cache
    fs/sysv/inode.c                    sysv_inode_cache
    fs/udf/super.c                     udf_inode_cache
    fs/ufs/super.c                     ufs_inode_cache
    net/socket.c                       sock_inode_cache
    net/sunrpc/rpc_pipe.c              rpc_inode_cache

The choice of which slab caches to so mark was quite simple.  I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch.  Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.

Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.

Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:23 -08:00
Theodore Ts'o 9b04c997b1 [PATCH] vfs: MS_VERBOSE should be MS_SILENT
The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose".  This is confusing and counter-intuitive.

In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:

#ifdef MS_SILENT
  { "quiet",    0, 0, MS_SILENT    },   /* be quiet  */
  { "loud",     0, 1, MS_SILENT    },   /* print out messages. */
#endif

So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 07:33:15 -08:00
Atsushi Nemoto 0ef675d491 [PATCH] mtd: 64 bit fixes
Fix some bugs in mtd/jffs2 on 64bit platform.

The MEMGETBADBLOCK/MEMSETBADBLOCK ioctl are not listed in compat_ioctl.h.

And some variables in jffs2 are declared as uint32_t but used to hold
size_t values.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-09 19:47:37 -08:00
David Woodhouse e96fb230cc [PATCH] jffs2: avoid divide-by-zero
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-08 14:14:01 -08:00
Arjan van de Ven 858119e159 [PATCH] Unlinline a bunch of other functions
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 18:27:06 -08:00
Randy Dunlap 16f7e0fe2e [PATCH] capable/capability.h (fs/)
fs: Use <linux/capability.h> where capable() is used.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 18:42:13 -08:00
Thomas Gleixner 21eeb7aa11 [JFFS2] Fix the slab cache constructor of 'struct jffs2_inode_info' objects.
JFFS2 initialize f->sem mutex as "locked" in the slab constructor which is a
bug. Objects are freed with unlocked f->sem mutex. So, when they allocated
again, f->sem is unlocked because the slab cache constructor is not called for
them. The constructor is called only once when memory pages are allocated for
objects (namely, when the slab layer allocates new slabs). So, sometimes
'struct jffs2_inode_info' are allocated with unlocked f->sem, sometimes with
locked. This is a bug. Instead, initialize f->sem as unlocked in the
constructor. I.e., in the "constructed" state f->sem must be unlocked.

From: Keijiro Yano <keijiro_yano@yahoo.co.jp>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-29 16:57:17 +01:00
Andrew Morton 02b7068221 [PATCH] jffs2 debug gcc-2.9x fix
Work around gcc-2.95.x macro expansion bug.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-23 16:08:39 -08:00
Thomas Gleixner 5b9d1f19a7 [JFFS2] Remove broken and useless debug code
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-13 19:33:24 +01:00
Linus Torvalds b3ce1debe2 Merge master.kernel.org:/pub/scm/linux/kernel/git/tglx/mtd-2.6
Some manual fixups for clashing kfree() cleanups etc.
2005-11-07 10:24:08 -08:00
Jesper Juhl f99d49adf5 [PATCH] kfree cleanup: fs
This is the fs/ part of the big kfree cleanup patch.

Remove pointless checks for NULL prior to calling kfree() in fs/.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:54:06 -08:00
Thomas Gleixner 182ec4eee3 [JFFS2] Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-07 14:18:56 +01:00
Artem B. Bityutskiy 008531f4c3 [JFFS2] Fix broken compile when debug level = 2
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:17:39 +01:00
Todd Poynor 4fc67fbe52 [JFFS2] Return 0, not number of bytes written, for success at commit_write
Some callers to block-layer commit_write function treat non-zero return as
error, notably the loopback mount driver sometimes used in conjunction with
JFFS2 on NAND flash for bad block avoidance, etc.  Return zero for success
as do various other commit_write functions.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:14:16 +01:00
Artem B. Bityutskiy daba5cc4bc [JFFS2] Fix dataflash support
- assume wbuf may be of size which is not power of 2
- don't make strange assumption about not padding wbuf for DataFlash
- use wbuf = DataFlash page and eraseblock >= 8 Dataflash pages

From: Peter Menzebach <pm-mtd@mw-itcon.de>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 23:01:48 +01:00
Artem B. Bityutskiy d55849aa4d [JFFS2] Use memset(struct) instead of nulling struct members one by one
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:41:34 +01:00
Artem B. Bityutskiy 2f0077e018 [JFFS2] Remove stale comment
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:40:33 +01:00
Ferenc Havasi 2bc9764c48 [JFFS2] Rename jffs2_summary_node to jffs2_raw_summary
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:32:45 +01:00
Artem B. Bityutskiy 733802d974 [JFFS2] Debug code simplification, update TODO
Simplify the debugging code further.
Update the TODO list

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 22:20:33 +01:00
Ferenc Havasi 34c0e90671 [JFFS2] Account summary space in reserved_size.
Always keep valid data in reserved_size.

It did not cause problems, but the reservation code was unoptimal
when centralized summary was active or the size of the erase block
was very small.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:47:18 +01:00
Artem B. Bityutskiy 81e39cf029 [JFFS2] Debug message format clean up
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:38:34 +01:00
Ferenc Havasi 8acff5e934 [JFFS2] Call summary collector for all mtd devices with writev support
Do the summary collection in the right place. If the device
was not writebuffered but had c->mtd->writev function
(e.g. blkmtd) the summary collector function was not called.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:37:07 +01:00
Ferenc Havasi c617e84248 [JFFS2] Return real jffs2_sum_init() error code
Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:31:05 +01:00
Ferenc Havasi e631ddba58 [JFFS2] Add erase block summary support (mount time improvement)
The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.

This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.

There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:29:48 +01:00
Ferenc Havasi 4ce1f56218 [JFFS2] Remove support for virtual blocks
Remove support for virtual blocks, which are build by
concatenation of multiple physical erase blocks.

For more information please read the MTD mailing list thread
"[PATCH] remove support for virtual blocks"

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 21:08:27 +01:00
Artem B. Bityutskiy f0507530cb [JFFS2] Solve BUG caused by frag->node representing a hole in fragtree
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:32:36 +01:00
Artem B. Bityutskiy 280562b210 [JFFS2] Calculate CRC check starting point correctly
When data starts from the beginning of NAND page, 'len' must be zero, not
c->wbuf_page.

Thanks to Zoltan Sogor for reporting this problem.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:29:56 +01:00
Artem B. Bityutskiy 8d5df40954 [JFFS2] More message formatting cleanups
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:27:14 +01:00
Artem B. Bityutskiy 3a69e0cd22 [JFFS2] Fix JFFS2 [mc]time handling
From: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:25:59 +01:00
Artem B. Bityutskiy 01d445f89d [JFFS2] Make the JFFS2 messages a bit nicer
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:24:15 +01:00
Nicolas Pitre 59da721a22 [JFFS2] Teach JFFS2 about Sibley flash
Intels Sibley flash needs JFFS2 write buffer functionality

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 20:13:52 +01:00
Artem B. Bityutskiy 45ca1b509e [JFFS2] Debug code clean up - step 7
Remove more noisy debugs. Add current->pid to debug messages.
Remove bogus includes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 19:14:35 +01:00
Artem B. Bityutskiy 3c09133739 [JFFS2] Correct buggy length checks
The previous changes introduced wrong length calculations.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:35:36 +01:00
Artem B. Bityutskiy 392435081e [JFFS2] Debug code clean up - step 6
Remove extra noisy debugs

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:33:09 +01:00
Artem B. Bityutskiy 1e0da3cb6c [JFFS2] Build fragtree in reverse order
Instead of building fragtree starting from node with the smallest version
number, start from the highest. This helps to avoid reading and checking
obsolete nodes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:22:17 +01:00
Artem B. Bityutskiy e0e3006f79 [JFFS2] Refine fragtree debug macros
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:19:41 +01:00
Artem B. Bityutskiy 1e900979a7 [JFFS2] Move another fragtree-related function to nodelist.c
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-11-06 18:11:59 +01:00