Commit Graph

9 Commits

Author SHA1 Message Date
Suresh Siddha 18374d89e5 x86, irq: Allow 0xff for /proc/irq/[n]/smp_affinity on an 8-cpu system
John Blackwood reported:
> on an older Dell PowerEdge 6650 system with 8 cpus (4 are hyper-threaded),
> and  32 bit (x86) kernel, once you change the irq smp_affinity of an irq
> to be less than all cpus in the system, you can never change really the
> irq smp_affinity back to be all cpus in the system (0xff) again,
> even though no error status is returned on the "/bin/echo ff >
> /proc/irq/[n]/smp_affinity" operation.
>
> This is due to that fact that BAD_APICID has the same value as
> all cpus (0xff) on 32bit kernels, and thus the value returned from
> set_desc_affinity() via the cpu_mask_to_apicid_and() function is treated
> as a failure in set_ioapic_affinity_irq_desc(), and no affinity changes
> are made.

set_desc_affinity() is already checking if the incoming cpu mask
intersects with the cpu online mask or not. So there is no need
for the apic op cpu_mask_to_apicid_and() to check again
and return BAD_APICID.

Remove the BAD_APICID return value from cpu_mask_to_apicid_and()
and also fix set_desc_affinity() to return -1 instead of using BAD_APICID
to represent error conditions (as cpu_mask_to_apicid_and() can return
logical or physical apicid values and BAD_APICID is really to represent
bad physical apic id).

Reported-by: John Blackwood <john.blackwood@ccur.com>
Root-caused-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1261103386.2535.409.camel@sbs-t61>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-12-17 22:03:06 -08:00
Yinghai Lu 087d7e56de x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus
found a system where x2apic reports an MSI-X irq initialization
failure:

[  302.859446] igbvf 0000:81:10.4: enabling device (0000 -> 0002)
[  302.874369] igbvf 0000:81:10.4: using 64bit DMA mask
[  302.879023] igbvf 0000:81:10.4: using 64bit consistent DMA mask
[  302.894386] igbvf 0000:81:10.4: enabling bus mastering
[  302.898171] igbvf 0000:81:10.4: setting latency timer to 64
[  302.914050] reserve_memtype added 0xefb08000-0xefb0c000, track uncached-minus, req uncached-minus, ret uncached-minus
[  302.933839] reserve_memtype added 0xefb28000-0xefb29000, track uncached-minus, req uncached-minus, ret uncached-minus
[  302.940367]   alloc irq_desc for 265 on node 4
[  302.956874]   alloc kstat_irqs on node 4
[  302.959452] alloc irq_2_iommu on node 0
[  302.974328] igbvf 0000:81:10.4: irq 265 for MSI/MSI-X
[  302.977778]   alloc irq_desc for 266 on node 4
[  302.980347]   alloc kstat_irqs on node 4
[  302.995312] free_memtype request 0xefb28000-0xefb29000
[  302.998816] igbvf 0000:81:10.4: Failed to initialize MSI-X interrupts.

... it turns out that when trying to enable MSI-X,
__assign_irq_vector(new, cfg_new, apic->target_cpus()) can not
get vector because for x2apic target-cpus returns cpumask_of(0)

Update that to online_mask like xapic.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <4A785AFF.3050902@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-08 17:04:58 +02:00
Yinghai Lu d8c7eb34c2 x86: Don't use current_cpu_data in x2apic phys_pkg_id
One system has socket 1 come up as BSP.

kexeced kernel reports BSP as:

[    1.524550] Initializing cgroup subsys cpuacct
[    1.536064] initial_apicid:20
[    1.537135] ht_mask_width:1
[    1.538128] core_select_mask:f
[    1.539126] core_plus_mask_width:5
[    1.558479] CPU: Physical Processor ID: 0
[    1.559501] CPU: Processor Core ID: 0
[    1.560539] CPU: L1 I cache: 32K, L1 D cache: 32K
[    1.579098] CPU: L2 cache: 256K
[    1.580085] CPU: L3 cache: 24576K
[    1.581108] CPU 0/0x20 -> Node 0
[    1.596193] CPU 0 microcode level: 0xffff0008

It doesn't have correct physical processor id and will get an
error:

[   38.840859] CPU0 attaching sched-domain:
[   38.848287]  domain 0: span 0,8,72 level SIBLING
[   38.851151]   groups: 0 8 72
[   38.858137]   domain 1: span 0,8-15,72-79 level MC
[   38.868944]    groups: 0,8,72 9,73 10,74 11,75 12,76 13,77 14,78 15,79
[   38.881383] ERROR: parent span is not a superset of domain->span
[   38.890724]    domain 2: span 0-7,64-71 level CPU
[   38.899237] ERROR: domain->groups does not contain CPU0
[   38.909229]     groups: 8-15,72-79
[   38.912547] ERROR: groups don't span domain->span
[   38.919665]     domain 3: span 0-127 level NODE
[   38.930739]      groups: 0-7,64-71 8-15,72-79 16-23,80-87 24-31,88-95 32-39,96-103 40-47,104-111 48-55,112-119 56-63,120-127

it turns out: we can not use current_cpu_data in phys_pgd_id
for x2apic.

identify_boot_cpu() is called by check_bugs() before
smp_prepare_cpus() and till smp_prepare_cpus() current_cpu_data
for bsp is assigned with boot_cpu_data.

Just make phys_pkg_id for x2apic is aligned to xapic.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A6ADD0D.10002@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-04 16:22:44 +02:00
Jaswinder Singh Rajput 2de1f33e99 x86: apic/x2apic_cluster.c x86_cpu_to_logical_apicid should be static
Impact: reduce kernel size a bit, address sparse warning

Addresses the problem pointed out by this sparse warning:
  arch/x86/kernel/apic/x2apic_cluster.c:13:1: warning: symbol 'per_cpu__x86_cpu_to_logical_apicid' was not declared. Should it be static?

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1239434726.4418.24.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 12:39:24 +02:00
Suresh Siddha ce4e240c27 x86: add x2apic_wrmsr_fence() to x2apic flush tlb paths
Impact: optimize APIC IPI related barriers

Uncached MMIO accesses for xapic are inherently serializing and hence
we don't need explicit barriers for xapic IPI paths.

x2apic MSR writes/reads don't have serializing semantics and hence need
a serializing instruction or mfence, to make all the previous memory
stores globally visisble before the x2apic msr write for IPI.

Add x2apic_wrmsr_fence() in flush tlb path to x2apic specific paths.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "steiner@sgi.com" <steiner@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
LKML-Reference: <1237313814.27006.203.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-18 09:36:14 +01:00
Ingo Molnar 1f5bcabf1b x86: apic: simplify secondary CPU wakeup methods
Impact: cleanup

- rename apic->wakeup_cpu  to apic->wakeup_secondary_cpu, to
  make it apparent that this is an SMP-only method

- handle NULL ->wakeup_secondary_cpus to mean the default INIT
  wakeup sequence - this allows simplification of the APIC
  driver templates.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 13:58:26 +01:00
Yinghai Lu 2b6163bf57 x86: remove update_apic from x86_quirks
Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26 06:32:25 +01:00
Suresh Siddha ef1f87aa7b x86: select x2apic ops in early apic probe only if x2apic mode is enabled
If BIOS hands over the control to OS in legacy xapic mode, select
legacy xapic related ops in the early apic probe and shift to x2apic
ops later in the boot sequence, only after enabling x2apic mode.

If BIOS hands over the control in x2apic mode, select x2apic related
ops in the early apic probe.

This fixes the early boot panic, where we were selecting x2apic ops,
while the cpu is still in legacy xapic mode.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-22 18:20:50 +01:00
Ingo Molnar f62bae5009 x86, apic: move APIC drivers to arch/x86/kernel/apic/*
arch/x86/kernel/ is getting a bit crowded, and the APIC
drivers are scattered into various different files.

Move them to arch/x86/kernel/apic/*, and also remove
the 'gen' prefix from those which had it.

Also move APIC related functionality: the IO-APIC driver,
the NMI and the IPI code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17 18:17:36 +01:00