Geert reports that builds where CONFIG_CRYPTO_AEGIS128_SIMD is not set
may still emit references to crypto_aegis128_update_simd(), which
cannot be satisfied and therefore break the build. These references
only exist in functions that can be optimized away, but apparently,
the compiler is not always able to prove this.
So add some explicit checks for CONFIG_CRYPTO_AEGIS128_SIMD to help the
compiler figure this out.
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ecdh_set_secret() casts a void* pointer to a const u64* in order to
feed it into ecc_is_key_valid(). This is not generally permitted by
the C standard, and leads to actual misalignment faults on ARMv6
cores. In some cases, these are fixed up in software, but this still
leads to performance hits that are entirely avoidable.
So let's copy the key into the ctx buffer first, which we will do
anyway in the common case, and which guarantees correct alignment.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
WireGuard and IPsec both typically operate on input blocks that are
~1420 bytes in size, given the default Ethernet MTU of 1500 bytes and
the overhead of the VPN metadata.
Many aead and sckipher implementations are optimized for power-of-2
block sizes, and whether they perform well when operating on 1420
byte blocks cannot be easily extrapolated from the performance on
power-of-2 block size. So let's add 1420 bytes explicitly, and round
it up to the next blocksize multiple of the algo in question if it
does not support 1420 byte blocks.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When working on crypto algorithms, being able to run tcrypt quickly
without booting an entire Linux installation can be very useful. For
instance, QEMU/kvm can be used to boot a kernel from the command line,
and having tcrypt.ko builtin would allow tcrypt to be executed to run
benchmarks, or to run tests for algorithms that need to be instantiated
from templates, without the need to make it past the point where the
rootfs is mounted.
So let's relax the requirement that tcrypt can only be built as a module
when CONFIG_EXPERT is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit c4741b2305 ("crypto: run initcalls for generic implementations
earlier") converted tcrypt.ko's module_init() to subsys_initcall(), but
this was unintentional: tcrypt.ko currently cannot be built into the core
kernel, and so the subsys_initcall() gets converted into module_init()
under the hood. Given that tcrypt.ko does not implement a generic version
of a crypto algorithm that has to be available early during boot, there
is no point in running the tcrypt init code earlier than implied by
module_init().
However, for crypto development purposes, we will lift the restriction
that tcrypt.ko must be built as a module, and when builtin, it makes sense
for tcrypt.ko (which does its work inside the module init function) to run
as late as possible. So let's switch to late_initcall() instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wiring the SIMD code into the generic driver has the unfortunate side
effect that the tcrypt testing code cannot distinguish them, and will
therefore not use the latter to fuzz test the former, as it does for
other algorithms.
So let's refactor the code a bit so we can register two implementations:
aegis128-generic and aegis128-simd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of calculating the tag and returning it to the caller on
decryption, use a SIMD compare and min across vector to perform
the comparison. This is slightly more efficient, and removes the
need on the caller's part to wipe the tag from memory if the
decryption failed.
While at it, switch to unsigned int when passing cryptlen and
assoclen - we don't support input sizes where it matters anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Avoid copying the tail block via a stack buffer if the total size
exceeds a single AEGIS block. In this case, we can use overlapping
loads and stores and NEON permutation instructions instead, which
leads to a modest performance improvement on some cores (< 5%),
and is slightly cleaner. Note that we still need to use a stack
buffer if the entire input is smaller than 16 bytes, given that
we cannot use 16 byte NEON loads and stores safely in this case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEGIS spec mentions explicitly that the security guarantees hold
only if the resulting plaintext and tag of a failed decryption are
withheld. So ensure that we abide by this.
While at it, drop the unused struct aead_request *req parameter from
crypto_aegis128_process_crypt().
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The extra tests in the manager actually require the manager to be
selected too. Otherwise the linker gives errors like:
ld: arch/x86/crypto/chacha_glue.o: in function `chacha_simd_stream_xor':
chacha_glue.c:(.text+0x422): undefined reference to `crypto_simd_disabled_for_test'
Fixes: 2343d1529a ("crypto: Kconfig - allow tests to be disabled when manager is disabled")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 3f69cc6076 ("crypto: af_alg - Allow arbitrarily long algorithm
names") made the kernel start accepting arbitrarily long algorithm names
in sockaddr_alg. However, the actual length of the salg_name field
stayed at the original 64 bytes.
This is broken because the kernel can access indices >= 64 in salg_name,
which is undefined behavior -- even though the memory that is accessed
is still located within the sockaddr structure. It would only be
defined behavior if the array were properly marked as arbitrary-length
(either by making it a flexible array, which is the recommended way
these days, or by making it an array of length 0 or 1).
We can't simply change salg_name into a flexible array, since that would
break source compatibility with userspace programs that embed
sockaddr_alg into another struct, or (more commonly) declare a
sockaddr_alg like 'struct sockaddr_alg sa = { .salg_name = "foo" };'.
One solution would be to change salg_name into a flexible array only
when '#ifdef __KERNEL__'. However, that would keep userspace without an
easy way to actually use the longer algorithm names.
Instead, add a new structure 'sockaddr_alg_new' that has the flexible
array field, and expose it to both userspace and the kernel.
Make the kernel use it correctly in alg_bind().
This addresses the syzbot report
"UBSAN: array-index-out-of-bounds in alg_bind"
(https://syzkaller.appspot.com/bug?extid=92ead4eb8e26a26d465e).
Reported-by: syzbot+92ead4eb8e26a26d465e@syzkaller.appspotmail.com
Fixes: 3f69cc6076 ("crypto: af_alg - Allow arbitrarily long algorithm names")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, by default crypto self-test failures only result in a
pr_warn() message and an "unknown" status in /proc/crypto. Both of
these are easy to miss. There is also an option to panic the kernel
when a test fails, but that can't be the default behavior.
A crypto self-test failure always indicates a kernel bug, however, and
there's already a standard way to report (recoverable) kernel bugs --
the WARN() family of macros. WARNs are noisier and harder to miss, and
existing test systems already know to look for them in dmesg or via
/proc/sys/kernel/tainted.
Therefore, call WARN() when an algorithm fails its self-tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the skcipher algorithm tests by getting the driver name
from the crypto_skcipher that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the AEAD algorithm tests by getting the driver name from
the crypto_aead that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When alg_test() is called from tcrypt.ko rather than from the algorithm
registration code, "driver" is actually the algorithm name, not the
driver name. So it shouldn't be used in places where a driver name is
wanted, e.g. when reporting a test failure or when checking whether the
driver is the generic driver or not.
Fix this for the hash algorithm tests by getting the driver name from
the crypto_ahash or crypto_shash that actually got allocated.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is an algorithm optimization. The reset operation when
setting the public key is repeated and redundant, so remove it.
At the same time, `sm2_ecc_os2ec()` is optimized to make the
function more simpler and more in line with the Linux code style.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----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=xE9E
-----END PGP SIGNATURE-----
Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the driver updates for 5.10.
A few SCSI updates in here too, in coordination with Martin as they
depend on core block changes for the shared tag bitmap.
This contains:
- NVMe pull requests via Christoph:
- fix keep alive timer modification (Amit Engel)
- order the PCI ID list more sensibly (Andy Shevchenko)
- cleanup the open by controller helper (Chaitanya Kulkarni)
- use an xarray for the CSE log lookup (Chaitanya Kulkarni)
- support ZNS in nvmet passthrough mode (Chaitanya Kulkarni)
- fix nvme_ns_report_zones (Christoph Hellwig)
- add a sanity check to nvmet-fc (James Smart)
- fix interrupt allocation when too many polled queues are
specified (Jeffle Xu)
- small nvmet-tcp optimization (Mark Wunderlich)
- fix a controller refcount leak on init failure (Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni)
- major refactoring of the scanning code (Christoph Hellwig)
- MD updates via Song:
- Bug fixes in bitmap code, from Zhao Heming
- Fix a work queue check, from Guoqing Jiang
- Fix raid5 oops with reshape, from Song Liu
- Clean up unused code, from Jason Yan
- Discard improvements, from Xiao Ni
- raid5/6 page offset support, from Yufen Yu
- Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap,
Hannes)
- null_blk open/active zone limit support (Niklas)
- Set of bcache updates (Coly, Dongsheng, Qinglang)"
* tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits)
md/raid5: fix oops during stripe resizing
md/bitmap: fix memory leak of temporary bitmap
md: fix the checking of wrong work queue
md/bitmap: md_bitmap_get_counter returns wrong blocks
md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks
md/raid0: remove unused function is_io_in_chunk_boundary()
nvme-core: remove extra condition for vwc
nvme-core: remove extra variable
nvme: remove nvme_identify_ns_list
nvme: refactor nvme_validate_ns
nvme: move nvme_validate_ns
nvme: query namespace identifiers before adding the namespace
nvme: revalidate zone bitmaps in nvme_update_ns_info
nvme: remove nvme_update_formats
nvme: update the known admin effects
nvme: set the queue limits in nvme_update_ns_info
nvme: remove the 0 lba_shift check in nvme_update_ns_info
nvme: clean up the check for too large logic block sizes
nvme: freeze the queue over ->lba_shift updates
nvme: factor out a nvme_configure_metadata helper
...
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
The sm2 code was split out of public_key.c in a way that breaks
modular builds. This patch moves the code back into the same file
as the original motivation was to minimise ifdefs and that has
nothing to do with splitting the code out.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3...")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang warns:
crypto/xor.c:101:4: warning: variable 'count' is uninitialized when used
here [-Wuninitialized]
count++;
^~~~~
crypto/xor.c:86:17: note: initialize the variable 'count' to silence
this warning
int i, j, count;
^
= 0
1 warning generated.
After the refactoring to use ktime that happened in this function, count
is only assigned, never read. Just remove the variable to get rid of the
warning.
Fixes: c055e3eae0 ("crypto: xor - use ktime for template benchmarking")
Link: https://github.com/ClangBuiltLinux/linux/issues/1171
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When memory allocation fails, an appropriate return value
should be set.
Fixes: 2155256396 ("X.509: support OSCCA SM2-with-SM3 certificate verification")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, we use the jiffies counter as a time source, by staring at
it until a HZ period elapses, and then staring at it again and perform
as many XOR operations as we can at the same time until another HZ
period elapses, so that we can calculate the throughput. This takes
longer than necessary, and depends on HZ, which is undesirable, since
HZ is system dependent.
Let's use the ktime interface instead, and use it to time a fixed
number of XOR operations, which can be done much faster, and makes
the time spent depend on the performance level of the system itself,
which is much more reasonable. To ensure that we have the resolution
we need even on systems with 32 kHz time sources, while not spending too
much time in the benchmark on a slow CPU, let's switch to 3 attempts of
800 repetitions each: that way, we will only misidentify algorithms that
perform within 10% of each other as the fastest if they are faster than
10 GB/s to begin with, which is not expected to occur on systems with
such coarse clocks.
On ThunderX2, I get the following results:
Before:
[72625.956765] xor: measuring software checksum speed
[72625.993104] 8regs : 10169.000 MB/sec
[72626.033099] 32regs : 12050.000 MB/sec
[72626.073095] arm64_neon: 11100.000 MB/sec
[72626.073097] xor: using function: 32regs (12050.000 MB/sec)
After:
[72599.650216] xor: measuring software checksum speed
[72599.651188] 8regs : 10491 MB/sec
[72599.652006] 32regs : 12345 MB/sec
[72599.652871] arm64_neon : 11402 MB/sec
[72599.652873] xor: using function: 32regs (12345 MB/sec)
Link: https://lore.kernel.org/linux-crypto/20200923182230.22715-3-ardb@kernel.org/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the XOR module performs its boot time benchmark at core
initcall time when it is built-in, to ensure that the RAID code can
make use of it when it is built-in as well.
Let's defer this to a later stage during the boot, to avoid impacting
the overall boot time of the system. Instead, just pick an arbitrary
implementation from the list, and use that as the preliminary default.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
The method of generating Other User Information is defined as
ZA=H256(ENTLA || IDA || a || b || xG || yG || xA || yA), it also
specified in https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02.
The x509 certificate supports SM2-with-SM3 type certificate
verification. Because certificate verification requires ZA
in addition to tbs data, ZA also depends on elliptic curve
parameters and public key data, so you need to access tbs in sig
and calculate ZA. Finally calculate the digest of the
signature and complete the verification work. The calculation
process of ZA is declared in specifications GM/T 0009-2012
and GM/T 0003.2-2012.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The digital certificate format based on SM2 crypto algorithm as
specified in GM/T 0015-2012. It was published by State Encryption
Management Bureau, China.
This patch adds the OID object identifier defined by OSCCA. The
x509 certificate supports SM2-with-SM3 type certificate parsing.
It uses the standard elliptic curve public key, and the sm2
algorithm signs the hash generated by sm3.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add testmgr test vectors for SM2 algorithm. These vectors come
from `openssl pkeyutl -sign` and libgcrypt.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the 'key' allocation fails, the 'req' will not be released,
which will cause memory leakage on this path. This patch adds a
'free_req' tag used to solve this problem, and two new err values
are added to reflect the real reason of the error.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some asymmetric algorithms will get different ciphertext after
each encryption, such as SM2, and let testmgr support the testing
of such algorithms.
In struct akcipher_testvec, set c and c_size to be empty, skip
the comparison of the ciphertext, and compare the decrypted
plaintext with m to achieve the test purpose.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This new module implement the SM2 public key algorithm. It was
published by State Encryption Management Bureau, China.
List of specifications for SM2 elliptic curve public key cryptography:
* GM/T 0003.1-2012
* GM/T 0003.2-2012
* GM/T 0003.3-2012
* GM/T 0003.4-2012
* GM/T 0003.5-2012
IETF: https://tools.ietf.org/html/draft-shen-sm2-ecdsa-02
oscca: http://www.oscca.gov.cn/sca/xxgk/2010-12/17/content_1002386.shtml
scctc: http://www.gmbz.org.cn/main/bzlb.html
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Both crypto_sm3_update and crypto_sm3_finup have been
exported, exporting crypto_sm3_final, to avoid having to
use crypto_sm3_finup(desc, NULL, 0, dgst) to calculate
the hash in some cases.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Extend the user-space RNG interface:
1. Add entropy input via ALG_SET_DRBG_ENTROPY setsockopt option;
2. Add additional data input via sendmsg syscall.
This allows DRBG to be tested with test vectors, for example for the
purpose of CAVP testing, which otherwise isn't possible.
To prevent erroneous use of entropy input, it is hidden under
CRYPTO_USER_API_RNG_CAVP config option and requires CAP_SYS_ADMIN to
succeed.
Signed-off-by: Elena Petrova <lenaptr@google.com>
Acked-by: Stephan Müller <smueller@chronox.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For now, asynchronous raid6 recovery calculate functions are require
common offset for pages. But, we expect them to support different page
offset after introducing stripe shared page. Do that by simplily adding
page offset where each page address are referred. Then, replace the
old interface with the new ones in raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
For now, syndrome compute functions require common offset in the pages
array. However, we expect them to support different offset when try to
use shared page in the following. Simplily covert them by adding page
offset where each page address are referred.
Since the only caller of async_gen_syndrome() and async_syndrome_val()
are in raid6, we don't want to reserve the old interface but modify the
interface directly. After that, replacing old interfaces with new ones
for raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
raid5 will call async_xor() and async_xor_val() to compute xor.
For now, both of them require the common src/dst page offset. But,
we want them to support different src/dst page offset for following
shared page.
Here, adding two new function async_xor_offs() and async_xor_val_offs()
respectively for async_xor() and async_xor_val().
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
We have a few interesting pieces in our cipher museum, which are never
used internally, and were only ever provided as generic C implementations.
Unfortunately, we cannot simply remove this code, as we cannot be sure
that it is not being used via the AF_ALG socket API, however unlikely.
So let's mark the Anubis, Khazad, SEED and TEA algorithms as obsolete,
which means they can only be enabled in the build if the socket API is
enabled in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that crypto/cbc.h is only used by the generic cbc template,
we can merge it back into the CBC code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cryptographic algorithms may have a lifespan that is significantly
shorter than Linux's, and so we need to start phasing out algorithms
that are known to be broken, and are no longer fit for general use.
RC4 (or arc4) is a good example here: there are a few areas where its
use is still somewhat acceptable, e.g., for interoperability with legacy
wifi hardware that can only use WEP or TKIP data encryption, but that
should not imply that, for instance, use of RC4 based EAP-TLS by the WPA
supplicant for negotiating TKIP keys is equally acceptable, or that RC4
should remain available as a general purpose cryptographic transform for
all in-kernel and user space clients.
Now that all in-kernel users that need to retain support have moved to
the arc4 library interface, and the known users of ecb(arc4) via the
socket API (iwd [0] and libell [1][2]) have been updated to switch to a
local implementation, we can take the next step, and mark the ecb(arc4)
skcipher as obsolete, and only provide it if the socket API is enabled in
the first place, as well as provide the option to disable all algorithms
that have been marked as obsolete.
[0] https://git.kernel.org/pub/scm/network/wireless/iwd.git/commit/?id=1db8a85a60c64523
[1] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=53482ce421b727c2
[2] https://git.kernel.org/pub/scm/libs/ell/ell.git/commit/?id=7f6a137809d42f6b
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull crypto fixes from Herbert Xu:
- fix regression in af_alg that affects iwd
- restore polling delay in qat
- fix double free in ingenic on error path
- fix potential build failure in sa2ul due to missing Kconfig dependency
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: af_alg - Work around empty control messages without MSG_MORE
crypto: sa2ul - add Kconfig selects to fix build error
crypto: ingenic - Drop kfree for memory allocated with devm_kzalloc
crypto: qat - add delay before polling mailbox
This patch adds the type-safe init_tfm/exit_tfm functions to the
ahash interface. This is meant to replace the unsafe cra_init and
cra_exit interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iwd daemon uses libell which sets up the skcipher operation with
two separate control messages. As the first control message is sent
without MSG_MORE, it is interpreted as an empty request.
While libell should be fixed to use MSG_MORE where appropriate, this
patch works around the bug in the kernel so that existing binaries
continue to work.
We will print a warning however.
A separate issue is that the new kernel code no longer allows the
control message to be sent twice within the same request. This
restriction is obviously incompatible with what iwd was doing (first
setting an IV and then sending the real control message). This
patch changes the kernel so that this is explicitly allowed.
Reported-by: Caleb Jorden <caljorden@hotmail.com>
Fixes: f3c802a1f3 ("crypto: algif_aead - Only wake up when...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Revert "crypto: hash - Add real ahash walk interface"
This reverts commit 75ecb231ff.
The callers of the functions in this commit were removed in ab8085c130
Remove these unused calls.
Fixes: ab8085c130 ("crypto: x86 - remove SHA multibuffer routines and mcryptd")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently if you speed test a hash that requires a key you'll get an
error because tcrypt does not set a key by default. This patch
allows a key to be set using the new module parameter klen.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The async path cannot use MAY_BACKLOG because it is not meant to
block, which is what MAY_BACKLOG does. On the other hand, both
the sync and async paths can make use of MAY_SLEEP.
Fixes: 83094e5e9e ("crypto: af_alg - add async support to...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I removed the MAY_BACKLOG flag on the aio path a while ago but
the error check still incorrectly interpreted EBUSY as success.
This may cause the submitter to wait for a request that will never
complete.
Fixes: dad4199706 ("crypto: algif_skcipher - Do not set...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "failed" in pr_err() messages.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the doubled word "a".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ard Biesheuvel