We don't need to specify an explicit rule in the Makefile, the implicit
one will do the same. The "__EXPORTED_HEADERS__" define is not needed,
because we build the test against the installed kernel headers, not the
in-tree kernel headers. Re-use "$(TEST_PROGS)" in the clean target
rather than spelling the executable name twice. Include <unistd.h>
rather than the rather specific <asm-generic/unistd.h>. Include
<syscall.h> rather than <sys/syscall.h>. In both cases, the former
header is located in a standard location and includes the latter.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On ppc big endian this check fails, the mutex doesn't necessarily need
to be identical for all pages after pthread_mutex_lock/unlock cycles.
The count verification (outside of the pthread_mutex_t structure)
suffices and that is retained.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This will report the error in the exit code, in addition of the fprintf.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Keep a non-zero placeholder after the count, for the my_bcmp comparison
of the page against the zeropage. The lockless increment between 255 to
256 against a lockless my_bcmp could otherwise return false positives on
ppc32le.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If __NR_userfaultfd is not yet defined by the arch, warn but still build
and run the userfaultfd selftest successfully.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Depend on "make headers_install" to create proper headers to include and
provide syscall numbers.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the usr/include subdirectory of the top-level tree to the include
path, and make sure to include headers without relative paths to make
sure the sanitized headers get picked up. Otherwise the compiler will
not be able to find the linux/compiler.h header included by the non-
sanitized include/uapi/linux/userfaultfd.h.
While at it, make sure to only hardcode the syscall numbers on x86 and
PowerPC if they haven't been properly picked up from the headers.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull s390 fixes from Martin Schwidefsky:
"A couple of system call updates. The two new system calls userfaultfd
and membarrier have been added, as well as the 17 direct calls for the
multiplexed socket system calls.
In addition the system call compat wrappers have been flagged as
notrace functions and a few wrappers could be removed.
And bug fixes for the vector register handling, cpu_mf, suspend/resume,
compat signals, SMT cputime accounting and the zfcp dumper"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: wire up separate socketcalls system calls
s390/compat: remove superfluous compat wrappers
s390/compat: do not trace compat wrapper functions
s390/s390x: allocate sys_membarrier system call number
s390/configs//zfcpdump_defconfig: Remove CONFIG_MEMSTICK
s390: wire up userfaultfd system call
s390/vtime: correct scaled cputime for SMT
s390/cpum_cf: Corrected return code for unauthorized counter sets
s390/compat: correct uc_sigmask of the compat signal frame
s390: fix floating point register corruption
s390/hibernate: fix save and restore of vector registers
This new test checks that all x86 registers are preserved across
32-bit syscalls. It tests syscalls through VDSO (if available)
and through INT 0x80, normally and under ptrace.
If kernel is a 64-bit one, high registers (r8..r15) are poisoned
before the syscall is called and are checked afterwards.
They must be either preserved, or cleared to zero (but r11 is
special); r12..15 must be preserved for INT 0x80.
EFLAGS is checked for changes too, but change there is not
considered to be a bug (paravirt kernels do not preserve
arithmetic flags).
Run-tested on 64-bit kernel:
$ ./test_syscall_vdso_32
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by
SYSRET insn [OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
On 32-bit paravirt kernel:
$ ./test_syscall_vdso_32
[NOTE] Not a 64-bit kernel, won't test R8..R15 leaks
[RUN] Executing 6-argument 32-bit syscall via VDSO
[WARN] Flags before=0000000000200ed7 id 0 00 o d i s z 0 a 0 p 1 c
[WARN] Flags after=0000000000200246 id 0 00 i z 0 0 p 1
[WARN] Flags change=0000000000000c91 0 00 o d s 0 a 0 0 c
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1442427809-2027-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Ingo Molnar:
- misc fixes all around the map
- block non-root vm86(old) if mmap_min_addr != 0
- two small debuggability improvements
- removal of obsolete paravirt op
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform: Fix Geode LX timekeeping in the generic x86 build
x86/apic: Serialize LVTT and TSC_DEADLINE writes
x86/ioapic: Force affinity setting in setup_ioapic_dest()
x86/paravirt: Remove the unused pv_time_ops::get_tsc_khz method
x86/ldt: Fix small LDT allocation for Xen
x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help text
x86/cpu: Print family/model/stepping in hex
x86/vm86: Block non-root vm86(old) if mmap_min_addr != 0
x86/alternatives: Make optimize_nops() interrupt safe and synced
x86/mm/srat: Print non-volatile flag in SRAT
x86/cpufeatures: Enable cpuid for Intel SHA extensions
With the previous patch, the installation method change from install
to rsync. There is no need to create subdir during test, the
default EMIT_TESTS is enough.
This patch essentially revert commit 84cbd9e4 ("selftests/exec: do not
install subdir as it is already created").
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The command of install could not handle the special files in exec
testcases, change the default rule to rsync to fix this.
The installation is unchanged after this commit.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use make's implict rule for building simple C programs.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change from = to += in order to allows the user to pass whatever
CFLAGS they wish(E.g. pass the proper headers and librareis
(popt.h and libpopt.so) in cross-compiling)
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
renamed jump_label directory to static_keys and failed to update
the Makefile, causing the selftests build to fail.
This commit fixes it by updating the Makefile with the new name
and also moves the entry into the correct position to keep the
list alphabetically sorted.
Fixes: 2bf9e0ab08 ("locking/static_keys: Provide a selftest")
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds support for s390 to the seccomp selftests. Some improvements
were made to enhance the accuracy of failure reporting, and additional
tests were added to validate assumptions about the currently traced
syscall. Also adds early asserts for running on older kernels to avoid
noise when the seccomp syscall is not implemented.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Not all shells define a variable UID. This is a bash and zsh feature only.
In other shells, the UID variable is not defined, so here test command
expands to [ != 0 ] which is a syntax error.
Without this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh zram.sh
zram.sh: 8: [: !=: unexpected operator
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
With this patch:
root@HGH1000007090:/opt/work/linux/tools/testing/selftests/zram# sh ./zram.sh
zram.sh : No zram.ko module or /dev/zram0 device file not found
zram.sh : CONFIG_ZRAM is not set
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Update the membarrier syscall self-test to match the membarrier
interface. Extend coverage of the interface. Consider ENOSYS as a
"SKIP" test, since it is a valid configuration, but does not allow
testing the system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Pranith Kumar <bobby.prani@gmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a self test for the membarrier system call.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge second patch-bomb from Andrew Morton:
"Almost all of the rest of MM. There was an unusually large amount of
MM material this time"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (141 commits)
zpool: remove no-op module init/exit
mm: zbud: constify the zbud_ops
mm: zpool: constify the zpool_ops
mm: swap: zswap: maybe_preload & refactoring
zram: unify error reporting
zsmalloc: remove null check from destroy_handle_cache()
zsmalloc: do not take class lock in zs_shrinker_count()
zsmalloc: use class->pages_per_zspage
zsmalloc: consider ZS_ALMOST_FULL as migrate source
zsmalloc: partial page ordering within a fullness_list
zsmalloc: use shrinker to trigger auto-compaction
zsmalloc: account the number of compacted pages
zsmalloc/zram: introduce zs_pool_stats api
zsmalloc: cosmetic compaction code adjustments
zsmalloc: introduce zs_can_compact() function
zsmalloc: always keep per-class stats
zsmalloc: drop unused variable `nr_to_migrate'
mm/memblock.c: fix comment in __next_mem_range()
mm/page_alloc.c: fix type information of memoryless node
memory-hotplug: fix comments in zone_spanned_pages_in_node() and zone_spanned_pages_in_node()
...
This update adds new zram test and fixes to problems found
during testing this new zram test. In addition, there are
a few bug fixes and ksefltest improvement patches from Linaro
developers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dXt3
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This update adds new zram test and fixes to problems found during
testing this new zram test. In addition, there are a few bug fixes
and ksefltest improvement patches from Linaro developers.
I will send another update later on this week to fix kselftest
breakage due to commit 2bf9e0ab08 ("locking/static_keys: Provide a
selftest") after the fix soaks in next for a couple of days"
* tag 'linux-kselftest-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/zram: Makefile fix
selftests/zram: must be run as root
selftests: breakpoints: fix installing error on the architecture except x86
selftests: check before install
selftests/zram: Adding zram tests
The hugetlb selftests provide minimal coverage. Have run script point
people at libhugetlbfs for better regression testing.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This manually reverts 7e50533d4b ("selftests: add hugetlbfstest").
The hugetlbfstest test depends on hugetlb pages being counted in a
task's rss. This functionality is not in the kernel, so the test will
always fail. Remove test to avoid confusion.
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 32-bit:
userfaultfd.c: In function 'locking_thread':
userfaultfd.c:152: warning: left shift count >= width of type
userfaultfd.c: In function 'uffd_poll_thread':
userfaultfd.c:295: warning: cast to pointer from integer of different size
userfaultfd.c: In function 'uffd_read_thread':
userfaultfd.c:332: warning: cast to pointer from integer of different size
Fix the shift warning by splitting the shift in two parts, and the
integer/pointer warnigns by adding intermediate casts to "unsigned long".
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1/ Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map. This facility is used by the pmem driver to
enable pfn_to_page() operations on the page frames returned by DAX
('direct_access' in 'struct block_device_operations'). For now, the
'memmap' allocation for these "device" pages comes from "System
RAM". Support for allocating the memmap from device memory will
arrive in a later kernel.
2/ Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3. Completion of
the conversion is targeted for v4.4.
3/ Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
4/ Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
5/ Miscellaneous updates and fixes to libnvdimm including support
for issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJV6Nx7AAoJEB7SkWpmfYgCWyYQAI5ju6Gvw27RNFtPovHcZUf5
JGnxXejI6/AqeTQ+IulgprxtEUCrXOHjCDA5dkjr1qvsoqK1qxug+vJHOZLgeW0R
OwDtmdW4Qrgeqm+CPoxETkorJ8wDOc8mol81kTiMgeV3UqbYeeHIiTAmwe7VzZ0C
nNdCRDm5g8dHCjTKcvK3rvozgyoNoWeBiHkPe76EbnxDICxCB5dak7XsVKNMIVFQ
NuYlnw6IYN7+rMHgpgpRux38NtIW8VlYPWTmHExejc2mlioWMNBG/bmtwLyJ6M3e
zliz4/cnonTMUaizZaVozyinTa65m7wcnpjK+vlyGV2deDZPJpDRvSOtB0lH30bR
1gy+qrKzuGKpaN6thOISxFLLjmEeYwzYd7SvC9n118r32qShz+opN9XX0WmWSFlA
sajE1ehm4M7s5pkMoa/dRnAyR8RUPu4RNINdQ/Z9jFfAOx+Q26rLdQXwf9+uqbEb
bIeSQwOteK5vYYCstvpAcHSMlJAglzIX5UfZBvtEIJN7rlb0VhmGWfxAnTu+ktG1
o9cqAt+J4146xHaFwj5duTsyKhWb8BL9+xqbKPNpXEp+PbLsrnE/+WkDLFD67jxz
dgIoK60mGnVXp+16I2uMqYYDgAyO5zUdmM4OygOMnZNa1mxesjbDJC6Wat1Wsndn
slsw6DkrWT60CRE42nbK
=o57/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This update has successfully completed a 0day-kbuild run and has
appeared in a linux-next release. The changes outside of the typical
drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the
removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and
the introduction of ZONE_DEVICE + devm_memremap_pages().
Summary:
- Introduce ZONE_DEVICE and devm_memremap_pages() as a generic
mechanism for adding device-driver-discovered memory regions to the
kernel's direct map.
This facility is used by the pmem driver to enable pfn_to_page()
operations on the page frames returned by DAX ('direct_access' in
'struct block_device_operations').
For now, the 'memmap' allocation for these "device" pages comes
from "System RAM". Support for allocating the memmap from device
memory will arrive in a later kernel.
- Introduce memremap() to replace usages of ioremap_cache() and
ioremap_wt(). memremap() drops the __iomem annotation for these
mappings to memory that do not have i/o side effects. The
replacement of ioremap_cache() with memremap() is limited to the
pmem driver to ease merging the api change in v4.3.
Completion of the conversion is targeted for v4.4.
- Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem
driver, update the VFS DAX implementation and PMEM api to provide
persistence guarantees for kernel operations on a DAX mapping.
- Convert the ACPI NFIT 'BLK' driver to map the block apertures as
cacheable to improve performance.
- Miscellaneous updates and fixes to libnvdimm including support for
issuing "address range scrub" commands, clarifying the optimal
'sector size' of pmem devices, a clarification of the usage of the
ACPI '_STA' (status) property for DIMM devices, and other minor
fixes"
* tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits)
libnvdimm, pmem: direct map legacy pmem by default
libnvdimm, pmem: 'struct page' for pmem
libnvdimm, pfn: 'struct page' provider infrastructure
x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB
add devm_memremap_pages
mm: ZONE_DEVICE for "device memory"
mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h
dax: drop size parameter to ->direct_access()
nd_blk: change aperture mapping from WC to WB
nvdimm: change to use generic kvfree()
pmem, dax: have direct_access use __pmem annotation
dax: update I/O path to do proper PMEM flushing
pmem: add copy_from_iter_pmem() and clear_pmem()
pmem, x86: clean up conditional pmem includes
pmem: remove layer when calling arch_has_wmb_pmem()
pmem, x86: move x86 PMEM API to new pmem.h header
libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option
pmem: switch to devm_ allocations
devres: add devm_memremap
libnvdimm, btt: write and validate parent_uuid
...
It changed as result of other syscalls, and while the system call list
itself was correctly updated, the selftest program was not.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vm86 exposes an interesting attack surface against the entry
code. Since vm86 is mostly useless anyway if mmap_min_addr != 0,
just turn it off in that case.
There are some reports that vbetool can work despite setting
mmap_min_addr to zero. This shouldn't break that use case,
as CAP_SYS_RAWIO already overrides mmap_min_addr.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Austin S Hemmelgarn <ahferroin7@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This test allocates two virtual areas and bounces the physical memory
across the two virtual areas using only userfaultfd.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This test focuses on ambient capabilities. It requires either root or
the ability to create user namespaces. Some of the test cases will be
skipped for nonroot users.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com> # Original author
Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- Introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- Use hardware RNG for arch_get_random_seed_* not arch_get_random_* from Paul Mackerras
- Seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh Salgaonkar
- Add powerpc timebase as a trace clock source from Naveen N. Rao
- Misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- Add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- Fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- Drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from Andrew Donnellan
- Initialize distance lookup table from drconf path from Nikunj A Dadhania
- Enable RTC class support from Vaibhav Jain
- Disable automatically blocked PCI config from Gavin Shan
- Add LEDs driver for PowerNV platform from Vasant Hegde
- Fix endianness issues in the HVSI driver from Laurent Dufour
- Kexec endian fixes from Samuel Mendoza-Jonas
- Fix corrupted pdn list from Gavin Shan
- Fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and updates,
device tree updates, e6500 fixes for non-SMP, and misc cleanup and minor
fixes.
- A ton of cxl updates & fixes:
- Add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- Destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- Destroy afu->contexts_idr on release of an afu from Johannes Thumshirn
- Compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- Plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- Add alternate MMIO error handling from Ian Munsie
- Allow release of contexts which have been OPENED but not STARTED from Andrew Donnellan
- Remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- Release irqs if memory allocation fails from Vaibhav Jain
- Remove racy attempt to force EEH invocation in reset from Daniel Axtens
- Fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- Fix force unmapping mmaps of contexts allocated through the kernel api from Ian Munsie
- Set up and enable PSL Timebase from Philippe Bergheaud
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=n9+X
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask
from Benjamin Herrenschmidt
- EEH fixes for SRIOV from Gavin
- introduce rtas_get_sensor_fast() for IRQ handlers from Thomas Huth
- use hardware RNG for arch_get_random_seed_* not arch_get_random_*
from Paul Mackerras
- seccomp filter support from Michael Ellerman
- opal_cec_reboot2() handling for HMIs & machine checks from Mahesh
Salgaonkar
- add powerpc timebase as a trace clock source from Naveen N. Rao
- misc cleanups in the xmon, signal & SLB code from Anshuman Khandual
- add an inline function to update POWER8 HID0 from Gautham R. Shenoy
- fix pte_pagesize_index() crash on 4K w/64K hash from Michael Ellerman
- drop support for 64K local store on 4K kernels from Michael Ellerman
- move dma_get_required_mask() from pnv_phb to pci_controller_ops from
Andrew Donnellan
- initialize distance lookup table from drconf path from Nikunj A
Dadhania
- enable RTC class support from Vaibhav Jain
- disable automatically blocked PCI config from Gavin Shan
- add LEDs driver for PowerNV platform from Vasant Hegde
- fix endianness issues in the HVSI driver from Laurent Dufour
- kexec endian fixes from Samuel Mendoza-Jonas
- fix corrupted pdn list from Gavin Shan
- fix fenced PHB caused by eeh_slot_error_detail() from Gavin Shan
- Freescale updates from Scott: Highlights include 32-bit memcpy/memset
optimizations, checksum optimizations, 85xx config fragments and
updates, device tree updates, e6500 fixes for non-SMP, and misc
cleanup and minor fixes.
- a ton of cxl updates & fixes:
- add explicit precision specifiers from Rasmus Villemoes
- use more common format specifier from Rasmus Villemoes
- destroy cxl_adapter_idr on module_exit from Johannes Thumshirn
- destroy afu->contexts_idr on release of an afu from Johannes
Thumshirn
- compile with -Werror from Daniel Axtens
- EEH support from Daniel Axtens
- plug irq_bitmap getting leaked in cxl_context from Vaibhav Jain
- add alternate MMIO error handling from Ian Munsie
- allow release of contexts which have been OPENED but not STARTED
from Andrew Donnellan
- remove use of macro DEFINE_PCI_DEVICE_TABLE from Vaishali Thakkar
- release irqs if memory allocation fails from Vaibhav Jain
- remove racy attempt to force EEH invocation in reset from Daniel
Axtens
- fix + cleanup error paths in cxl_dev_context_init from Ian Munsie
- fix force unmapping mmaps of contexts allocated through the kernel
api from Ian Munsie
- set up and enable PSL Timebase from Philippe Bergheaud
* tag 'powerpc-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (140 commits)
cxl: Set up and enable PSL Timebase
cxl: Fix force unmapping mmaps of contexts allocated through the kernel api
cxl: Fix + cleanup error paths in cxl_dev_context_init
powerpc/eeh: Fix fenced PHB caused by eeh_slot_error_detail()
powerpc/pseries: Cleanup on pci_dn_reconfig_notifier()
powerpc/pseries: Fix corrupted pdn list
powerpc/powernv: Enable LEDS support
powerpc/iommu: Set default DMA offset in dma_dev_setup
cxl: Remove racy attempt to force EEH invocation in reset
cxl: Release irqs if memory allocation fails
cxl: Remove use of macro DEFINE_PCI_DEVICE_TABLE
powerpc/powernv: Fix mis-merge of OPAL support for LEDS driver
powerpc/powernv: Reset HILE before kexec_sequence()
powerpc/kexec: Reset secondary cpu endianness before kexec
powerpc/hvsi: Fix endianness issues in the HVSI driver
leds/powernv: Add driver for PowerNV platform
powerpc/powernv: Create LED platform device
powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
powerpc/powernv: Fix the log message when disabling VF
cxl: Allow release of contexts which have been OPENED but not STARTED
...
Pull locking and atomic updates from Ingo Molnar:
"Main changes in this cycle are:
- Extend atomic primitives with coherent logic op primitives
(atomic_{or,and,xor}()) and deprecate the old partial APIs
(atomic_{set,clear}_mask())
The old ops were incoherent with incompatible signatures across
architectures and with incomplete support. Now every architecture
supports the primitives consistently (by Peter Zijlstra)
- Generic support for 'relaxed atomics':
- _acquire/release/relaxed() flavours of xchg(), cmpxchg() and {add,sub}_return()
- atomic_read_acquire()
- atomic_set_release()
This came out of porting qwrlock code to arm64 (by Will Deacon)
- Clean up the fragile static_key APIs that were causing repeat bugs,
by introducing a new one:
DEFINE_STATIC_KEY_TRUE(name);
DEFINE_STATIC_KEY_FALSE(name);
which define a key of different types with an initial true/false
value.
Then allow:
static_branch_likely()
static_branch_unlikely()
to take a key of either type and emit the right instruction for the
case. To be able to know the 'type' of the static key we encode it
in the jump entry (by Peter Zijlstra)
- Static key self-tests (by Jason Baron)
- qrwlock optimizations (by Waiman Long)
- small futex enhancements (by Davidlohr Bueso)
- ... and misc other changes"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
jump_label/x86: Work around asm build bug on older/backported GCCs
locking, ARM, atomics: Define our SMP atomics in terms of _relaxed() operations
locking, include/llist: Use linux/atomic.h instead of asm/cmpxchg.h
locking/qrwlock: Make use of _{acquire|release|relaxed}() atomics
locking/qrwlock: Implement queue_write_unlock() using smp_store_release()
locking/lockref: Remove homebrew cmpxchg64_relaxed() macro definition
locking, asm-generic: Add _{relaxed|acquire|release}() variants for 'atomic_long_t'
locking, asm-generic: Rework atomic-long.h to avoid bulk code duplication
locking/atomics: Add _{acquire|release|relaxed}() variants of some atomic operations
locking, compiler.h: Cast away attributes in the WRITE_ONCE() magic
locking/static_keys: Make verify_keys() static
jump label, locking/static_keys: Update docs
locking/static_keys: Provide a selftest
jump_label: Provide a self-test
s390/uaccess, locking/static_keys: employ static_branch_likely()
x86, tsc, locking/static_keys: Employ static_branch_likely()
locking/static_keys: Add selftest
locking/static_keys: Add a new static_key interface
locking/static_keys: Rework update logic
locking/static_keys: Add static_key_{en,dis}able() helpers
...
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
Do not override run_tests, The default rule will just run TEST_PROGS
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adding new functionality check_prereqs() to check test must be run as root
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull x86 asm changes from Ingo Molnar:
"The biggest changes in this cycle were:
- Revamp, simplify (and in some cases fix) Time Stamp Counter (TSC)
primitives. (Andy Lutomirski)
- Add new, comprehensible entry and exit handlers written in C.
(Andy Lutomirski)
- vm86 mode cleanups and fixes. (Brian Gerst)
- 32-bit compat code cleanups. (Brian Gerst)
The amount of simplification in low level assembly code is already
palpable:
arch/x86/entry/entry_32.S | 130 +----
arch/x86/entry/entry_64.S | 197 ++-----
but more simplifications are planned.
There's also the usual laudry mix of low level changes - see the
changelog for details"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (83 commits)
x86/asm: Drop repeated macro of X86_EFLAGS_AC definition
x86/asm/msr: Make wrmsrl() a function
x86/asm/delay: Introduce an MWAITX-based delay with a configurable timer
x86/asm: Add MONITORX/MWAITX instruction support
x86/traps: Weaken context tracking entry assertions
x86/asm/tsc: Add rdtscll() merge helper
selftests/x86: Add syscall_nt selftest
selftests/x86: Disable sigreturn_64
x86/vdso: Emit a GNU hash
x86/entry: Remove do_notify_resume(), syscall_trace_leave(), and their TIF masks
x86/entry/32: Migrate to C exit path
x86/entry/32: Remove 32-bit syscall audit optimizations
x86/vm86: Rename vm86->v86flags and v86mask
x86/vm86: Rename vm86->vm86_info to user_vm86
x86/vm86: Clean up vm86.h includes
x86/vm86: Move the vm86 IRQ definitions to vm86.h
x86/vm86: Use the normal pt_regs area for vm86
x86/vm86: Eliminate 'struct kernel_vm86_struct'
x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'
x86/vm86: Move vm86 fields out of 'thread_struct'
...
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle are:
- the combination of tree geometry-initialization simplifications and
OS-jitter-reduction changes to expedited grace periods. These two
are stacked due to the large number of conflicts that would
otherwise result.
- privatize smp_mb__after_unlock_lock().
This commit moves the definition of smp_mb__after_unlock_lock() to
kernel/rcu/tree.h, in recognition of the fact that RCU is the only
thing using this, that nothing else is likely to use it, and that
it is likely to go away completely.
- documentation updates.
- torture-test updates.
- misc fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcu,locking: Privatize smp_mb__after_unlock_lock()
rcu: Silence lockdep false positive for expedited grace periods
rcu: Don't disable CPU hotplug during OOM notifiers
scripts: Make checkpatch.pl warn on expedited RCU grace periods
rcu: Update MAINTAINERS entry
rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
rcu: Make rcu_is_watching() really notrace
cpu: Wait for RCU grace periods concurrently
rcu: Create a synchronize_rcu_mult()
rcu: Fix obsolete priority-boosting comment
rcu: Use WRITE_ONCE in RCU_INIT_POINTER
rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
rcu: Add RCU-sched flavors of get-state and cond-sync
rcu: Add fastpath bypassing funnel locking
rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
rcu: Pull out wait_event*() condition into helper function
documentation: Describe new expedited stall warnings
rcu: Add stall warnings to synchronize_sched_expedited()
...
Here is the new patches for the driver core / sysfs for 4.3-rc1.
Very small number of changes here, all the details are in the shortlog,
nothing major happening at all this kernel release, which is nice to
see.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlXV9EwACgkQMUfUDdst+ylv1ACgj7srYyvumehX1zfRVzEWNuez
chQAoKHnSpDMME/WmhQQRxzQ5pfd1Pni
=uGHg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the new patches for the driver core / sysfs for 4.3-rc1.
Very small number of changes here, all the details are in the
shortlog, nothing major happening at all this kernel release, which is
nice to see"
* tag 'driver-core-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
bus: subsys: update return type of ->remove_dev() to void
driver core: correct device's shutdown order
driver core: fix docbook for device_private.device
selftests: firmware: skip timeout checks for kernels without user mode helper
kernel, cpu: Remove bogus __ref annotations
cpu: Remove bogus __ref annotation of cpu_subsys_online()
firmware: fix wrong memory deallocation in fw_add_devm_name()
sysfs.txt: update show method notes about sprintf/snprintf/scnprintf usage
devres: fix devres_get()
Enable the pmem driver to handle PFN device instances. Attaching a pmem
namespace to a pfn device triggers the driver to allocate and initialize
struct page entries for pmem. Memory capacity for this allocation comes
exclusively from RAM for now which is suitable for low PMEM to RAM
ratios. This mechanism will be expanded later for setting an "allocate
from PMEM" policy.
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Implement the base infrastructure for libnvdimm PFN devices. Similar to
BTT devices they take a namespace as a backing device and layer
functionality on top. In this case the functionality is reserving space
for an array of 'struct page' entries to be handed out through
pfn_to_page(). For now this is just the basic libnvdimm-device-model for
configuring the base PFN device.
As the namespace claiming mechanism for PFN devices is mostly identical
to BTT devices drivers/nvdimm/claim.c is created to house the common
bits.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This should result in a pretty sizeable performance gain for reads. For
rough comparison I did some simple read testing using PMEM to compare
reads of write combining (WC) mappings vs write-back (WB). This was
done on a random lab machine.
PMEM reads from a write combining mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000
100000+0 records in
100000+0 records out
409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s
PMEM reads from a write-back mapping:
# dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000
1000000+0 records in
1000000+0 records out
4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s
To be able to safely support a write-back aperture I needed to add
support for the "read flush" _DSM flag, as outlined in the DSM spec:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
This flag tells the ND BLK driver that it needs to flush the cache lines
associated with the aperture after the aperture is moved but before any
new data is read. This ensures that any stale cache lines from the
previous contents of the aperture will be discarded from the processor
cache, and the new data will be read properly from the DIMM. We know
that the cache lines are clean and will be discarded without any
writeback because either a) the previous aperture operation was a read,
and we never modified the contents of the aperture, or b) the previous
aperture operation was a write and we must have written back the dirtied
contents of the aperture to the DIMM before the I/O was completed.
In order to add support for the "read flush" flag I needed to add a
generic routine to invalidate cache lines, mmio_flush_range(). This is
protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently
only supported on x86.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the test cases is not supported by the current architecture
the install files(TEST_PROGS, TEST_PROGS_EXTENDED and TEST_FILES)
will be empty. Check it before installation to dismiss a failure
reported by install program.
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
zram: Compressed RAM based block devices
----------------------------------------
The zram module creates RAM based block devices named /dev/zram<id>
(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
in memory itself. These disks allow very fast I/O and compression provides
good amounts of memory savings. Some of the usecases include /tmp storage,
use as swap disks, various caches under /var and maybe many more :)
Statistics for individual zram devices are exported through sysfs nodes at
/sys/block/zram<id>/
This patch is to validate the zram functionality. Test interacts with block
device /dev/zram<id> and sysfs nodes /sys/block/zram<id>/
zram.sh: sanity check of CONFIG_ZRAM and to run zram01 and zram02 tests
zram01.sh: creates general purpose ram disks with different filesystems
zram02.sh: creates block device for swap
zram_lib.sh: create library with initialization/cleanup functions
README: ZRAM introduction and Kconfig required.
Makefile: To run zram tests
zram test output
-----------------
./zram.sh
--------------------
running zram tests
--------------------
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
test that we can set compression algorithm
supported algs: [lzo] lz4
/sys/block/zram0/comp_algorithm = 'lzo' (1/1)
zram set compression algorithm: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '2097152' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '2M' (1/1)
zram set memory limit: OK
make ext4 filesystem on /dev/zram0
zram mkfs.ext4: OK
mount /dev/zram0
zram mount of zram device(s): OK
fill zram0...
zram0 can be filled with '1932' KB
zram used 3M, zram disk sizes 2097152M
zram compression ratio: 699050.66:1: OK
zram cleanup
zram01 : [PASS]
/dev/zram0 device file found: OK
set max_comp_streams to zram device(s)
/sys/block/zram0/max_comp_streams = '2' (1/1)
zram max streams: OK
set disk size to zram device(s)
/sys/block/zram0/disksize = '1048576' (1/1)
zram set disksizes: OK
set memory limit to zram device(s)
/sys/block/zram0/mem_limit = '1M' (1/1)
zram set memory limit: OK
make swap with zram device(s)
done with /dev/zram0
zram making zram mkswap and swapon: OK
zram swapoff: OK
zram cleanup
zram02 : [PASS]
CC: Shuah Khan <shuahkh@osg.samsung.com>
CC: Tyler Baker <tyler.baker@linaro.org>
CC: Milosz Wasilewski <milosz.wasilewski@linaro.org>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-By: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We currently register a platform device for e820 type-12 memory and
register a nvdimm bus beneath it. Registering the platform device
triggers the device-core machinery to probe for a driver, but that
search currently comes up empty. Building the nvdimm-bus registration
into the e820_pmem platform device registration in this way forces
libnvdimm to be built-in. Instead, convert the built-in portion of
CONFIG_X86_PMEM_LEGACY to simply register a platform device and move the
rest of the logic to the driver for e820_pmem, for the following
reasons:
1/ Letting e820_pmem support be a module allows building and testing
libnvdimm.ko changes without rebooting
2/ All the normal policy around modules can be applied to e820_pmem
(unbind to disable and/or blacklisting the module from loading by
default)
3/ Moving the driver to a generic location and converting it to scan
"iomem_resource" rather than "e820.map" means any other architecture can
take advantage of this simple nvdimm resource discovery mechanism by
registering a resource named "Persistent Memory (legacy)"
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
I've had this sitting around for a while. Add it to the
selftests tree. Far Cry running under Wine depends on this
behavior.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ee4d63799a9e5294b70930618b71d04d2770eb2d.1439838962.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
sigreturn_64 was broken by ed596cde94 ("Revert x86 sigcontext
cleanups"). Turn it off until we have a better fix.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a184e75ff170a0bcd76bf376c41cad2c402fe9f7.1439838962.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Test PACKET_FANOUT_EBPF by inserting a program into the the kernel
with bpf(), then attaching it to the fanout group. Observe the same
payload-based distribution as in the PACKET_FANOUT_CBPF test.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test PACKET_FANOUT_CBPF by inserting a cBPF program that selects a
socket by payload. Requires modifying the test program to send
packets with multiple payloads.
Also fix a bug in testing the return value of mmap()
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We forgot to install the tempfile, so when the selftests are installed
and then run the subpage_prot_file test fails.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djbw: tools/testing/nvdimm/ and memunmap_pmem support]
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Kill arch_memremap_pmem() and just let the architecture specify the
flags to be passed to memremap(). Default to writethrough by default.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull RCU changes from Paul E. McKenney:
- The combination of tree geometry-initialization simplifications
and OS-jitter-reduction changes to expedited grace periods.
These two are stacked due to the large number of conflicts
that would otherwise result.
[ With one addition, a temporary commit to silence a lockdep false
positive. Additional changes to the expedited grace-period
primitives (queued for 4.4) remove the cause of this false
positive, and therefore include a revert of this temporary commit. ]
- Documentation updates.
- Torture-test updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The CONFIG_FW_LOADER_USER_HELPER is mostly disabled these days, so skip
timeout setting for these kernels.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upcoming changes to static keys is interacting/conflicting with the following
pending TSC commits in tip:x86/asm:
4ea1636b04 x86/asm/tsc: Rename native_read_tsc() to rdtsc()
...
So merge it into the locking tree to have a smoother resolution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The test failed due to an oversight on my part when run on a
64-bit kernel. vm86 isn't expected to work at all, and I
mistakenly failed one part of the test because no signal was
delivered.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/502c8bef877b33fe4943885ded6125dfcc7892db.1438205722.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This tests general modify_ldt() behavior (only writes, so far) as
well as synchronous updates via IPI. It fails on old kernels.
I called this ldt_gdt because I'll add set_thread_area() tests to
it at some point.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: security@kernel.org <security@kernel.org>
Cc: xen-devel <xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/dcfda65dad07ff5a3ea97a9172b5963bf8031b2e.1438291540.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wire up the syscall number and regs so the tests work on powerpc.
With the powerpc kernel support just merged, all tests pass on ppc64,
ppc64 (compat), ppc64le, ppc, ppc64e and ppc64e (compat).
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The seccomp_bpf test uses BPF_LD|BPF_W|BPF_ABS to load 32-bit values
from seccomp_data->args. On big endian machines this will load the high
word of the argument, which is not what the test wants.
Borrow a hack from samples/seccomp/bpf-helper.h which changes the offset
on big endian to account for this.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Kees Cook <keescook@chromium.org>
Add support for the three ARS DSM commands:
- Query ARS Capabilities - Queries the firmware to check if a given
range supports scrub, and if so, which type (persistent vs. volatile)
- Start ARS - Starts a scrub for a given range/type
- Query ARS Status - Checks status of a previously started scrub, and
provides the error logs if any.
The commands are described by the example DSM spec at:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
Also add these commands to the nfit_test test framework, and return
canned data.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The entry_from_vm86 selftest was very weak. Improve it: test
more types of kernel entries from vm86 mode and test them more
carefully.
While we're at it, try to improve behavior on non-SEP CPUs. The
old code was buggy because I misunderstood the intended
semantics of #UD in vm86, so I didn't handle a possible signal.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d8ef1d7368ac70d8342481563ed50f9a7d2eea6f.1436492057.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
An earlier (pre-kernel-integration) refactoring of this code mistakenly
replaced the error condition, <, with a >. Use < to detect an error as
opposed to a successful requeue or signal race.
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The CONFIG_RCU_CPU_STALL_INFO has been default-y for a couple of
releases with no complaints, so it is time to eliminate this Kconfig
option entirely, so that the long-form RCU CPU stall warnings cannot
be disabled. This commit does just that.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently none of the RCU-tasks scenarios enables lockdep-RCU, which
causes bugs to be missed. This commit therefore enables lockdep-RCU
on TASKS01.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In preparation for fixing the BLK path to properly use "directed
pcommit" enable the unit test infrastructure to emit mock "flush"
tables. Writes to these flush addresses trigger a memory controller to
flush its internal buffers to persistent media, similar to the x86
"pcommit" instruction.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY
return code to indicate that the flags are unimplimented and to fall
back to a safe default. As is the -ENXIO error code erroneoously
indicates to fail enabling a BLK region.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched
from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked
routines to restore the ability to run the unit tests.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This test passes on 4.0 and fails on some newer kernels.
Fortunately, the failure is likely not a big deal.
This test will make sure that we don't break it further (e.g. OOPSing)
as we clean up the entry code and that we eventually fix the
regression.
There's arguably no need to preserve the old ABI here --
anything that makes it into a fast (vDSO) syscall with a bad
stack is about to crash no matter what we do.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: paulmck@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/9cfcc51005168cb1b06b31991931214d770fc59a.1435952415.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory devices
(NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface
table). After registering NVDIMMs the NFIT driver then registers
"region" devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block device
(disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of persistent
memory address ranges is re-worked to drive PMEM-namespaces emitted by
the libnvdimm-core. In this update the PMEM driver, on x86, gains the
ability to assert that writes to persistent memory have been flushed all
the way through the caches and buffers in the platform to persistent
media. See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through "Block
Data Windows" as defined by the NFIT. The primary difference of this
driver to PMEM is that only a small window of persistent memory is
mapped into system address space at any given point in time. Per-NVDIMM
windows are reprogrammed at run time, per-I/O, to access different
portions of the media. BLK-mode, by definition, does not support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss). The
sinister aspect of sector tearing is that most applications do not know
they have a atomic sector dependency. At least today's disk's rarely
ever tear sectors and if they do one almost certainly gets a CRC error
on access. NVDIMMs will always tear and always silently. Until an
application is audited to be robust in the presence of sector-tearing
the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VtWG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm subsystem from Dan Williams:
"The libnvdimm sub-system introduces, in addition to the
libnvdimm-core, 4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory
devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
Interface table).
After registering NVDIMMs the NFIT driver then registers "region"
devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block
device (disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of
persistent memory address ranges is re-worked to drive
PMEM-namespaces emitted by the libnvdimm-core.
In this update the PMEM driver, on x86, gains the ability to assert
that writes to persistent memory have been flushed all the way
through the caches and buffers in the platform to persistent media.
See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through
"Block Data Windows" as defined by the NFIT. The primary difference
of this driver to PMEM is that only a small window of persistent
memory is mapped into system address space at any given point in
time.
Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
different portions of the media. BLK-mode, by definition, does not
support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss).
The sinister aspect of sector tearing is that most applications do
not know they have a atomic sector dependency. At least today's
disk's rarely ever tear sectors and if they do one almost certainly
gets a CRC error on access. NVDIMMs will always tear and always
silently. Until an application is audited to be robust in the
presence of sector-tearing the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore"
* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
arch, x86: pmem api for ensuring durability of persistent memory updates
libnvdimm: Add sysfs numa_node to NVDIMM devices
libnvdimm: Set numa_node to NVDIMM devices
acpi: Add acpi_map_pxm_to_online_node()
libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
pmem: flag pmem block devices as non-rotational
libnvdimm: enable iostat
pmem: make_request cleanups
libnvdimm, pmem: fix up max_hw_sectors
libnvdimm, blk: add support for blk integrity
libnvdimm, btt: add support for blk integrity
fs/block_dev.c: skip rw_page if bdev has integrity
libnvdimm: Non-Volatile Devices
tools/testing/nvdimm: libnvdimm unit test infrastructure
libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
nd_btt: atomic sector updates
libnvdimm: infrastructure for btt devices
libnvdimm: write blk label set
libnvdimm: write pmem label set
libnvdimm: blk labels and namespace instantiation
...
This update adds two new test suites: futex and seccomp.
In addition, it includes fixes for bugs in timers, other
tests, and compile framework. It introduces new quicktest
feature to enable users to choose to run tests that complete
in a short time..
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVjagPAAoJEAsCRMQNDUMcAwkQAJ3Sk59zj+slDYxQ9TcckX6m
n5YcqjCd7vxHu163f2R9wH+cxnS0LSn0bq79IHvTUYpr36wGEKpws7BLecKRlIUA
0t1mpVcgEjT2tc8XhAlAGtXJ0FV7idQSzyJnlTTOdO6MyZkuJW9L+CL6q3Uzcfm5
KroeZC+m6ZulUiYlpIc9epltO9l+szq+dJouaDan35oCAGOjV1VgBKfatAa1zmeX
d5NM0lO7y4gAHwLvlMhDszAf5E5vSv7S4YfnHftV5ITjb9KQJcaluVnmsy8kaV+J
Mv4KL4lPMiIZWTn4VWjiHsR48oXw5xXPfW9AhNz6UTxwFlgX3D/EVfBtCIJ1Arq0
PmvpWuKOWBBbteEAQHUCHj/9X3VoX5Lrt9fps++/2+trwKbrS1qJWeyZuSPhbtOp
qKbquIQpvzStg60igKcDu8E6vdDdHDY1hPPOR/n8izH8ZGpXA/K0SRUOAa2aI6ZI
I3PoH38Rlz+BZsEz9uU4zIOEOpl4Js6n6GYvh0MRuT2bzhjpF+rvFd1ej/zw0r62
OGZp9n68ZLwktPEvagXT4pFJQuPcJuauW7g8nhH+jU+6LAJh8pRGDBx9uBuCTWti
DHX6bBqosWBMjlI6i073UE7lmnLB9hxtirZOrkWf7NkLl53pOiVg7F1vQx8pZRpU
Qir9+ypbuRnadWaz2MB2
=co5w
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"This update adds two new test suites: futex and seccomp.
In addition, it includes fixes for bugs in timers, other tests, and
compile framework. It introduces new quicktest feature to enable
users to choose to run tests that complete in a short time"
* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: add quicktest support
selftests: add seccomp suite
selftest, x86: fix incorrect comment
tools selftests: Fix 'clean' target with make 3.81
selftests/futex: Add .gitignore
kselftest: Add exit code defines
selftests: Add futex tests to the top-level Makefile
selftests/futex: Increment ksft pass and fail counters
selftests/futex: Update Makefile to use lib.mk
selftests: Add futex functional tests
kselftests: timers: Check _ALARM clockids are supported before suspending
kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
kselftests: timers: Increase delay between suspends in alarmtimer-suspend
selftests/exec: do not install subdir as it is already created
selftests/ftrace: install test.d
selftests: copy TEST_DIRS to INSTALL_PATH
Test compaction of mlocked memory
selftests/mount: output WARN messages when mount test skipped
selftests/timers: Make git ignore all binaries in timers test suite
Upon detection of an unarmed dimm in a region, arrange for descendant
BTT, PMEM, or BLK instances to be read-only. A dimm is primarily marked
"unarmed" via flags passed by platform firmware (NFIT).
The flags in the NFIT memory device sub-structure indicate the state of
the data on the nvdimm relative to its energy source or last "flush to
persistence". For the most part there is nothing the driver can do but
advertise the state of these flags in sysfs and emit a message if
firmware indicates that the contents of the device may be corrupted.
However, for the case of ACPI_NFIT_MEM_ARMED, the driver can arrange for
the block devices incorporating that nvdimm to be marked read-only.
This is a safe default as the data is still available and new writes are
held off until the administrator either forces read-write mode, or the
energy source becomes armed.
A 'read_only' attribute is added to REGION devices to allow for
overriding the default read-only policy of all descendant block devices.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
'libnvdimm' is the first driver sub-system in the kernel to implement
mocking for unit test coverage. The nfit_test module gets built as an
external module and arranges for external module replacements of nfit,
libnvdimm, nd_pmem, and nd_blk. These replacements use the linker
--wrap option to redirect calls to ioremap() + request_mem_region() to
custom defined unit test resources. The end result is a fully
functional nvdimm_bus, as far as userspace is concerned, but with the
capability to perform otherwise destructive tests on emulated resources.
Q: Why not use QEMU for this emulation?
QEMU is not suitable for unit testing. QEMU's role is to faithfully
emulate the platform. A unit test's role is to unfaithfully implement
the platform with the goal of triggering bugs in the corners of the
sub-system implementation. As bugs are discovered in platforms, or the
sub-system itself, the unit tests are extended to backstop a fix with a
reproducer unit test.
Another problem with QEMU is that it would require coordination of 3
software projects instead of 2 (kernel + libndctl [1]) to maintain and
execute the tests. The chances for bit rot and the difficulty of
getting the tests running goes up non-linearly the more components
involved.
Q: Why submit this to the kernel tree instead of external modules in
libndctl?
Simple, to alleviate the same risk that out-of-tree external modules
face. Updates to drivers/nvdimm/ can be immediately evaluated to see if
they have any impact on tools/testing/nvdimm/.
Q: What are the negative implications of merging this?
It is a unique maintenance burden because the purpose of mocking an
interface to enable a unit test is to purposefully short circuit the
semantics of a routine to enable testing. For example
__wrap_ioremap_cache() fakes the pmem driver into "ioremap()'ing" a test
resource buffer allocated by dma_alloc_coherent(). The future
maintenance burden hits when someone changes the semantics of
ioremap_cache() and wonders what the implications are for the unit test.
[1]: https://github.com/pmem/ndctl
Cc: <linux-acpi@vger.kernel.org>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
- Disable the 32-bit vdso when building LE, so we can build with a 64-bit only
toolchain.
- EEH fixes from Gavin & Richard.
- Enable the sys_kcmp syscall from Laurent.
- Sysfs control for fastsleep workaround from Shreyas.
- Expose OPAL events as an irq chip by Alistair.
- MSI ops moved to pci_controller_ops by Daniel.
- Fix for kernel to userspace backtraces for perf from Anton.
- Merge pseries and pseries_le defconfigs from Cyril.
- CXL in-kernel API from Mikey.
- OPAL prd driver from Jeremy.
- Fix for DSCR handling & tests from Anshuman.
- Powernv flash mtd driver from Cyril.
- Dynamic DMA Window support on powernv from Alexey.
- LLVM clang fixes & workarounds from Anton.
- Reworked version of the patch to abort syscalls when transactional.
- Fix the swap encoding to support 4TB, from Aneesh.
- Various fixes as usual.
- Freescale updates from Scott: Highlights include more 8xx optimizations, an
e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and
various fixes and cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=d9Wh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- disable the 32-bit vdso when building LE, so we can build with a
64-bit only toolchain.
- EEH fixes from Gavin & Richard.
- enable the sys_kcmp syscall from Laurent.
- sysfs control for fastsleep workaround from Shreyas.
- expose OPAL events as an irq chip by Alistair.
- MSI ops moved to pci_controller_ops by Daniel.
- fix for kernel to userspace backtraces for perf from Anton.
- merge pseries and pseries_le defconfigs from Cyril.
- CXL in-kernel API from Mikey.
- OPAL prd driver from Jeremy.
- fix for DSCR handling & tests from Anshuman.
- Powernv flash mtd driver from Cyril.
- dynamic DMA Window support on powernv from Alexey.
- LLVM clang fixes & workarounds from Anton.
- reworked version of the patch to abort syscalls when transactional.
- fix the swap encoding to support 4TB, from Aneesh.
- various fixes as usual.
- Freescale updates from Scott: Highlights include more 8xx
optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
t1024/t1023 support, and various fixes and cleanup.
* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
cxl: Fix typo in debug print
cxl: Add CXL_KERNEL_API config option
powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
powerpc/mm: Change the swap encoding in pte.
powerpc/mm: PTE_RPN_MAX is not used, remove the same
powerpc/tm: Abort syscalls in active transactions
powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
powerpc/include: Add opal-prd to installed uapi headers
powerpc/powernv: fix construction of opal PRD messages
powerpc/powernv: Increase opal-irqchip initcall priority
powerpc: Make doorbell check preemption safe
powerpc/powernv: pnv_init_idle_states() should only run on powernv
macintosh/nvram: Remove as unused
powerpc: Don't use gcc specific options on clang
powerpc: Don't use -mno-strict-align on clang
powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
powerpc: Only use -mabi=altivec if toolchain supports it
powerpc: Fix duplicate const clang warning in user access code
vfio: powerpc/spapr: Support Dynamic DMA windows
vfio: powerpc/spapr: Register memory and define IOMMU v2
...
Add quicktest support to enable users to choose to run
tests that complete in a short time. Choosing this option
excludes tests that take longer time complete e.g: timers.
User can specify quicktest option from kernel top level or
selftests directory.
Kernel top level directory:
make quicktest=1 kselftest
tools/testing/selftests directory:
make quicktest=1 run_tests
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Pull RCU updates from Ingo Molnar:
- Continued initialization/Kconfig updates: hide most Kconfig options
from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single
interactive configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically. Later
on we'll remove this single leftover configuration option as well.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and
rcu_lockdep_assert()
- RCU CPU-hotplug cleanups
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes
- Documentation updates
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcutorture: Allow repetition factors in Kconfig-fragment lists
rcutorture: Display "make oldconfig" errors
rcutorture: Update TREE_RCU-kconfig.txt
rcutorture: Make rcutorture scripts force RCU_EXPERT
rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
rcutorture: TASKS_RCU set directly, so don't explicitly set it
rcutorture: Test SRCU cleanup code path
rcutorture: Replace barriers with smp_store_release() and smp_load_acquire()
locktorture: Change longdelay_us to longdelay_ms
rcutorture: Allow negative values of nreaders to oversubscribe
rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
rcutorture: Exchange TREE03 and TREE04 geometries
locktorture: fix deadlock in 'rw_lock_irq' type
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
rcu: Further shrink Tiny RCU by making empty functions static inlines
rcu: Conditionally compile RCU's eqs warnings
rcu: Remove prompt for RCU implementation
rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO
rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF
...
This patch changes the syscall handler to doom (tabort) active
transactions when a syscall is made and return very early without
performing the syscall and keeping side effects to a minimum (no CPU
accounting or system call tracing is performed). Also included is a
new HWCAP2 bit, PPC_FEATURE2_HTM_NOSC, to indicate this
behaviour to userspace.
Currently, the system call instruction automatically suspends an
active transaction which causes side effects to persist when an active
transaction fails.
This does change the kernel's behaviour, but in a way that was
documented as unsupported. It doesn't reduce functionality as
syscalls will still be performed after tsuspend; it just requires that
the transaction be explicitly suspended. It also provides a
consistent interface and makes the behaviour of user code
substantially the same across powerpc and platforms that do not
support suspended transactions (e.g. x86 and s390).
Performance measurements using
http://ozlabs.org/~anton/junkcode/null_syscall.c indicate the cost of
a normal (non-aborted) system call increases by about 0.25%.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In 0c4a5fc95b (Add leap-second timer edge testing to
leap-a-day.c), we added a timer to the test which checks to make
sure timers near the leapsecond edge behave correctly.
However, the output generated from the timer uses ctime_r, which
isn't async-signal safe, and should that signal land while the
main test is using ctime_r to print its output, its possible for
the test to deadlock on glibc internal locks.
Thus this patch reworks the output to avoid using ctime_r in
the signal handler.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434565003-3386-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This imports the existing seccomp test suite into the kernel's selftests
tree. It contains extensive testing of seccomp features and corner cases.
There remain additional tests to move into the kernel tree, but they have
not yet been ported to all the architectures seccomp supports:
https://github.com/redpig/seccomp/tree/master/tests
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Prarit reported an issue w/ timers around the leapsecond, where a
timer set for Midnight UTC (00:00:00) might fire a second early right
before the leapsecond (23:59:60 - though it appears as a repeated
23:59:59) is applied.
So I've updated the leap-a-day.c test to integrate a similar test,
where we set a timer and check if it triggers at the right time, and
if the ntp state transition is managed properly.
Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reported-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1434063297-28657-6-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds .gitignore for all the newly added DSCR tests.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test to update the system wide DSCR value repeatedly
and then verifies that any thread on any given CPU on the system must be
able to see the same DSCR value whether its is being read through the
problem state based SPR or the privilege state based SPR.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test continuously updates the system wide DSCR default value in the
sysfs interface and makes sure that the same is reflected across all the
sysfs interfaces for each individual CPUs present on the system.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test case to verify that the changed DSCR value inside
any process would be inherited to it's child across the fork and exec
system call.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test to verify that the changed DSCR value inside any
process would be inherited to it's child process across the fork system
call.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test which verifies that the DSCR privilege and
problem state SPR read & write accesses while making sure that the
results are always the same irrespective of which SPR number is being
used.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test which modifies the DSCR using mtspr instruction
and verifies the change using mfspr instruction. It uses both the
privilege state SPR as well as the problem state SPR for the purpose.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a test case for the system wide DSCR default value,
which when changed through it's sysfs interface must be visible to all
threads reading DSCR either through the privilege state SPR or the
problem state SPR. The DSCR value change should be immediate as well.
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These tests were merged in parallel to the install support, update them
now to use it.
This also adds cross compile support for the VPHN test which was missing
it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Initialization/Kconfig updates: hide most Kconfig options from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single interactive
configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert().
- RCU CPU-hotplug cleanups.
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes.
- Documentation updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Test a couple of special cases in 32-bit kernels for entries
from vm86 mode. This will OOPS both old kernels due to a bug
and and 4.1-rc5 due to a regression I introduced, and it should
make sure that the SYSENTER-from-vm86-mode hack in the kernel
keeps working.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/09a9916761e0a9e42d4922f147af45a0079cc1e8.1432936374.git.luto@kernel.org
Tests: 394838c960 x86/asm/entry/32: Fix user_mode() misuses
Tests: 7ba554b5ac x86/asm/entry/32: Really make user_mode() work correctly for VM86 mode
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel. This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture scripting fails to dump out errors from
"make oldconfig", so this commit addresses this issue.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit updates TREE_RCU-kconfig.txt to reflect changes in RCU's
Kconfig setup. This commit also updates rcutorture's Kconfig fragments
to account for Kconfig parameters that are now driven directly off of
other Kconfig parameters.
The #CHECK# prefix tells the rcutorture scripts to take no action to try
to set the Kconfig parameter, but to check that it does in fact get set.
This is useful for verifying that Kconfig parameters that are supposed
to be automatically set do in fact get set to the required values.
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit causes the rcutorture scripts to force RCU_EXPERT so that
these scripts can cause rcutorture to torture RCU in the various required
configurations. However, SRCU-P, TASKS03, and TREE09 retain !RCU_EXPERT
in order to ensure testing of the vanilla configuration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit updates rcutortures configuration-fragment files to account
for the move from the CONFIG_RCU_FANOUT_EXACT Kconfig parameter to the
new rcutree.rcu_fanout_exact= boot parameter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The TASKS01, TASKS02, and TASKS03 rcutorture config fragments currently
set CONFIG_TASKS_RCU. However, now that the value of this Kconfig
parameter is set via "select" statements, it is no longer necessary to
set it explicitly. This commit therefore removes it from the Kconfig
fragments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables. However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct(). Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables. This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers(). This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud. Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
TREE03 has been especially effective at finding bugs lately. This commit
makes it even more effective by speeding up its CPU hotplug testing and
increasing its NR_CPUs from 8 to 16. TREE08's NR_CPUS is decreased from
16 to 8 in order to maintain the same test duration.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Given that the combination of PREEMPT_RCU and HOTPLUG_CPU is producing the
most bugs lately, this commit swaps the TREE03 and TREE04 rcu_node-tree
geometries so that the test exercising PREEMPT_RCU and HOTPLUG_CPU has
three-level rather than two-level rcu_node trees.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Tiny RCU supports both RCU-sched and RCU-bh, but only RCU-sched is
currently tested by the rcutorture scripts. This commit therefore
changes the TINY02 configuration to test RCU-bh, with TINY01 continuing
to test RCU-sched.
This shortcoming of the current rcutorture tests was located by mutation
testing by Iftekhar. The idea behind mutation testing is to automatically
mutate the code under test. If a given mutant is not caught by testing,
this is a hint that the testing might need to be improved, as was the
case here. Note that this is only a hint because it is possible to mutate
the code into something else that still works. For example, a mutation
that removes (say) a WARN_ON() will not normally result in a test failure.
This change resulted in the test failure caused by list mishandling,
which is fixed by the next commit.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them. This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability. A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies. Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current comment indicates it's checking for a 32-bit build
environment, but it actually checks for a 64-bit environment. Fix this.
Signed-off-by: Martin Kelly <martkell@amazon.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make 3.81 doesn't have the 'undefine' command. Using undefine
to clear LDFLAGS fails when make version 3.81 is used. Fix it
to use override to clear LDFLAGS.
Tested-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: http://lkml.kernel.org/r/20150514151225.GH23588@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Define the exit codes with KSFT_PASS and similar so tests can use these
directly if they choose. Also enable harnesses and other tooling to use
the defines instead of hardcoding the return codes.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Enable futex tests to be built and run with the make kselftest and
associated targets.
Most of the tests require escalated privileges. These return ERROR, and
run.sh continues.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add kselftest.h to logging.h and increment the pass and fail counters as
part of the print_result routine which is called by all futex tests.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adapt the futextest Makefiles to use lib.mk macros for RUN_TESTS and
EMIT_TESTS. For now, we reuse the run.sh mechanism provided by
futextest. This doesn't provide the standard selftests: [PASS|FAIL]
format, but the tests provide very similar output already.
This results in the run_kselftest.sh script for futexes including a
single line: ./run.sh
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The futextest testsuite [1] provides functional, stress, and
performance tests for the various futex op codes. Those tests will be of
more use to futex developers if they are included with the kernel
source.
Copy the core infrastructure and the functional tests into selftests,
but adapt them for inclusion in the kernel:
- Update the Makefile to include the run_tests target, remove reference
to the performance and stress tests from the contributed sources.
- Replace my dead IBM email address with my current Intel email address.
- Remove the warrantee and write-to paragraphs from the license blurbs.
- Remove the NAME section as the filename is easily determined. ;-)
- Make the whitespace usage consistent in a couple of places.
- Cleanup various CodingStyle violations.
A future effort will explore moving the performance and stress tests
into the kernel.
1. http://git.kernel.org/cgit/linux/kernel/git/dvhart/futextest.git
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: linux-api@vger.kernel.org
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
It was reported that the alarmtimer-suspend test hangs on older
systems that don't support _ALARM clockids.
This is due to the fact that we don't check if the timer_create
fails, and thus when we suspend, the system will not programatically
resume.
Fix this by checking the timer_create call for errors.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
On the hardware I have, resume latency from an alarm is often
2-3 seconds (with a fair amount of variability due to the RTC's
single second granularity). Having four seconds be the pass/fail
bar is maybe a little too tight, so extend this to 5 seconds.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When testing on some hardware, waiting only a second before
re-triggering suspend can keep TCP connections from re-establishing
which after a number of cycles can cause TCP connections to close
while the test is running.
So extend the delay between suspend calls to 3 seconds to let
the connections stay alive.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Remove subdir from DEPS as it is already created at runtime. Without this,
make install fails.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The ftrace test requires the directory test.d and all of it's contents to be
present during execution. Use TEST_DIRS to ensure this is copied to the
INSTALL_PATH.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Loop over all TEST_DIRS and recursively copy them to the INSTALL_PATH. Tests
such as ftrace require a directory and all of it's contents to execute the
test properly, thus these directories and files need to be copied when we
perform an install.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Commit commit 5bbe3547aa ("mm: allow compaction of unevictable pages")
introduced a sysctl that allows userspace to enable scanning of locked
pages for compaction. This patch introduces a new test which fragments
main memory and attempts to allocate a number of huge pages to exercise
this compaction logic.
Tested on machines with up to 32 GB RAM. With the patch a much larger
number of huge pages can be allocated than on the kernel without the
patch.
Example output:
On a machine with 16 GB RAM:
sudo make run_tests vm
...
-----------------------
running compaction_test
-----------------------
No of huge pages allocated = 3834
[PASS]
...
Signed-off-by: Sri Jayaramappa <sjayaram@akamai.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric B Munson <emunson@akamai.com>
Reviewed-by: Eric B Munson <emunson@akamai.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If /proc/self/uid_map doesn't exist, mount test case exits
wthout any warning. Fix it to print a warning that the test
is skipped because /proc/self/uid_map doesn't exist.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch includes the timers test binaries into the .gitignore
file listing in their respective directories. This will make sure
that git ignores all of these test binaries when displaying status.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Conflicts:
drivers/net/ethernet/cadence/macb.c
drivers/net/phy/phy.c
include/linux/skbuff.h
net/ipv4/tcp.c
net/switchdev/switchdev.c
Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.
phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.
tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.
macb.c involved the addition of two zyncq device entries.
skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.
Signed-off-by: David S. Miller <davem@davemloft.net>
psock_fanout tests the various fanout modes. Change the test for
rollover mode to expect early rollover due to socket pressure
as implemented in 2ccdbaa6d5 ("packet: rollover lock contention
avoidance").
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Urgent fix for Kselftest regression introduced in 4.1-rc1
by the new x86 test due to its hard dependency on 32-bit
build environment. A set of 5 patches fix the make kselftest
run and kselftest install.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=09md
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Urgent fix for Kselftest regression introduced in 4.1-rc1 by the new
x86 test due to its hard dependency on 32-bit build environment.
A set of 5 patches fix the make kselftest run and kselftest install"
* tag 'linux-kselftest-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests, x86: Rework x86 target architecture detection
selftests, x86: Remove useless run_tests rule
selftests/x86: install tests
selftest/x86: have no dependency on all when cross building
selftest/x86: build both bitnesses
We currently fail to build on a non-multilib x86_64 target. We
print a helpful error, but it's nicer to allow the build to succeed.
Fix it and improve cross-compilation support by detecting
architecture support directly and building only the relevant tests.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Now that selftests/x86 uses the kselftest infrastructure, the
run_x86_tests.sh mechanism is just in the way.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Include lib.mk and set TEST_PROGS where appropriate.
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If the CROSS_COMPILE is set remove all's dependency on all_32 and all_64.
Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Using uname with the processor flag option in some cases can yield 'unknown'
so lets use the machine flag option as it is deterministic. Add a dependency
for all_32 when building on a x86 64 bit host so that both bitnesses are
built in this case.
Cc: Andy Lutomirski <luto@amacapital.net>
Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
On AMD CPUs, SYSRET can return with a valid SS descriptor with
with the hidden attributes set to an unusable state. Make sure
the kernel doesn't let this happen. This detects an
as-yet-unfixed regression.
Note that the 64-bit version of this test fails on AMD CPUs on
all kernel versions, although the issue in the 64-bit case is
much less severe than in the 32-bit case.
Reported-by: Brian Gerst <brgerst@gmail.com>
Tested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Tests: e7d6eefaaa ("x86/vdso32/syscall.S: Do not load __USER32_DS to %ss")
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Link: http://lkml.kernel.org/r/resend_4d740841bac383742949e2fefb03982736595087.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My patch to add install support for the powerpc selftests had a typo,
leading to the three tests in the pmu directory itself not being
installed.
Fixes: 6faeeea44b ("selftests: Add install support for the powerpc tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit feba40362b.
Although the principle of this change is good, the implementation has a
few issues.
Firstly we can sometimes fail to abort a syscall because r12 may have
been clobbered by C code if we went down the virtual CPU accounting
path, or if syscall tracing was enabled.
Secondly we have decided that it is safer to abort the syscall even
earlier in the syscall entry path, so that we avoid the syscall tracing
path when we are transactional.
So that we have time to thoroughly test those changes we have decided to
revert this for this merge window and will merge the fixed version in
the next window.
NB. Rather than reverting the selftest we just drop tm-syscall from
TEST_PROGS so that it's not run by default.
Fixes: feba40362b ("powerpc/tm: Abort syscalls in active transactions")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 fixes from Ingo Molnar:
"This tree includes:
- an FPU related crash fix
- a ptrace fix (with matching testcase in tools/testing/selftests/)
- an x86 Kconfig DMA-config defaults tweak to better avoid
non-working drivers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
x86/fpu: Load xsave pointer *after* initialization
x86/ptrace: Fix the TIF_FORCED_TF logic in handle_signal()
x86, selftests: Add single_step_syscall test
- Numerous minor fixes, cleanups etc.
- More EEH work from Gavin to remove its dependency on device_nodes.
- Memory hotplug implemented entirely in the kernel from Nathan Fontenot.
- Removal of redundant CONFIG_PPC_OF by Kevin Hao.
- Rewrite of VPHN parsing logic & tests from Greg Kurz.
- A fix from Nish Aravamudan to reduce memory usage by clamping
nodes_possible_map.
- Support for pstore on powernv from Hari Bathini.
- Removal of old powerpc specific byte swap routines by David Gibson.
- Fix from Vasant Hegde to prevent the flash driver telling you it was flashing
your firmware when it wasn't.
- Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
- Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek.
- Some fixes for migration from Tyrel Datwyler.
- A new syscall to switch the cpu endian by Michael Ellerman.
- Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn.
- A fix for the OPAL sensor driver from Cédric Le Goater.
- Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
- Large series from Daniel Axtens to make our PCI hooks per PHB rather than per
machine.
- Small patch from Sam Bobroff to explicitly abort non-suspended transactions
on syscalls, plus a test to exercise it.
- Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
- Small patch to enable the hard lockup detector from Anton Blanchard.
- Fix from Dave Olson for missing L2 cache information on some CPUs.
- Some fixes from Michael Ellerman to get Cell machines booting again.
- Freescale updates from Scott: Highlights include BMan device tree nodes, an
MSI erratum workaround, a couple minor performance improvements, config
updates, and misc fixes/cleanup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=03Yh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- Numerous minor fixes, cleanups etc.
- More EEH work from Gavin to remove its dependency on device_nodes.
- Memory hotplug implemented entirely in the kernel from Nathan
Fontenot.
- Removal of redundant CONFIG_PPC_OF by Kevin Hao.
- Rewrite of VPHN parsing logic & tests from Greg Kurz.
- A fix from Nish Aravamudan to reduce memory usage by clamping
nodes_possible_map.
- Support for pstore on powernv from Hari Bathini.
- Removal of old powerpc specific byte swap routines by David Gibson.
- Fix from Vasant Hegde to prevent the flash driver telling you it was
flashing your firmware when it wasn't.
- Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.
- Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
Stancek.
- Some fixes for migration from Tyrel Datwyler.
- A new syscall to switch the cpu endian by Michael Ellerman.
- Large series from Wei Yang to implement SRIOV, reviewed and acked by
Bjorn.
- A fix for the OPAL sensor driver from Cédric Le Goater.
- Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.
- Large series from Daniel Axtens to make our PCI hooks per PHB rather
than per machine.
- Small patch from Sam Bobroff to explicitly abort non-suspended
transactions on syscalls, plus a test to exercise it.
- Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.
- Small patch to enable the hard lockup detector from Anton Blanchard.
- Fix from Dave Olson for missing L2 cache information on some CPUs.
- Some fixes from Michael Ellerman to get Cell machines booting again.
- Freescale updates from Scott: Highlights include BMan device tree
nodes, an MSI erratum workaround, a couple minor performance
improvements, config updates, and misc fixes/cleanup.
* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
powerpc/powermac: Fix build error seen with powermac smp builds
powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
powerpc/cell: Fix iommu breakage caused by controller_ops change
powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
powerpc/pseries: Correct memory hotplug locking
powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
powerpc: Add ppc64 hard lockup detector support
oprofile: Disable oprofile NMI timer on ppc64
powerpc/perf/hv-24x7: Add missing put_cpu_var()
powerpc/perf/hv-24x7: Break up single_24x7_request
powerpc/perf/hv-24x7: Define update_event_count()
powerpc/perf/hv-24x7: Whitespace cleanup
powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
powerpc/perf/hv-24x7: Rename hv_24x7_event_update
powerpc/perf/hv-24x7: Move debug prints to separate function
powerpc/perf/hv-24x7: Drop event_24x7_request()
powerpc/perf/hv-24x7: Use pr_devel() to log message
...
Conflicts:
tools/testing/selftests/powerpc/Makefile
tools/testing/selftests/powerpc/tm/Makefile
This is a very simple test that makes system calls with TF set.
This test currently fails when running the 32-bit build on a
64-bit kernel on an Intel CPU. This bug will be fixed by the
next commit.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Link: http://lkml.kernel.org/r/20e68021155f6ab5c60590dcad81d37c68ea2c4f.1429139075.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When MAP_HUGETLB memory is unmapped, the length must be hugepage aligned,
otherwise it fails with -EINVAL.
All tests currently behave correctly, but it's better to explcitly test
the return value for completeness and document the requirement, especially
if users copy map_hugetlb.c as a sample implementation.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joern Engel <joern@logfs.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Eric B Munson <emunson@akamai.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RCU changes from Ingo Molnar:
"The main changes in this cycle were:
- changes permitting use of call_rcu() and friends very early in
boot, for example, before rcu_init() is invoked.
- add in-kernel API to enable and disable expediting of normal RCU
grace periods.
- improve RCU's handling of (hotplug-) outgoing CPUs.
- NO_HZ_FULL_SYSIDLE fixes.
- tiny-RCU updates to make it more tiny.
- documentation updates.
- miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
cpu: Provide smpboot_thread_init() on !CONFIG_SMP kernels as well
cpu: Defer smpboot kthread unparking until CPU known to scheduler
rcu: Associate quiescent-state reports with grace period
rcu: Yet another fix for preemption and CPU hotplug
rcu: Add diagnostics to grace-period cleanup
rcutorture: Default to grace-period-initialization delays
rcu: Handle outgoing CPUs on exit from idle loop
cpu: Make CPU-offline idle-loop transition point more precise
rcu: Eliminate ->onoff_mutex from rcu_node structure
rcu: Process offlining and onlining only at grace-period start
rcu: Move rcu_report_unblock_qs_rnp() to common code
rcu: Rework preemptible expedited bitmask handling
rcu: Remove event tracing from rcu_cpu_notify(), used by offline CPUs
rcutorture: Enable slow grace-period initializations
rcu: Provide diagnostic option to slow down grace-period initialization
rcu: Detect stalls caused by failure to propagate up rcu_node tree
rcu: Eliminate empty HOTPLUG_CPU ifdef
rcu: Simplify sync_rcu_preempt_exp_init()
rcu: Put all orphan-callback-related code under same comment
rcu: Consolidate offline-CPU callback initialization
...
Pull x86 asm changes from Ingo Molnar:
"There were lots of changes in this development cycle:
- over 100 separate cleanups, restructuring changes, speedups and
fixes in the x86 system call, irq, trap and other entry code, part
of a heroic effort to deobfuscate a decade old spaghetti asm code
and its C code dependencies (Denys Vlasenko, Andy Lutomirski)
- alternatives code fixes and enhancements (Borislav Petkov)
- simplifications and cleanups to the compat code (Brian Gerst)
- signal handling fixes and new x86 testcases (Andy Lutomirski)
- various other fixes and cleanups
By their nature many of these changes are risky - we tried to test
them well on many different x86 systems (there are no known
regressions), and they are split up finely to help bisection - but
there's still a fair bit of residual risk left so caveat emptor"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (148 commits)
perf/x86/64: Report regs_user->ax too in get_regs_user()
perf/x86/64: Simplify regs_user->abi setting code in get_regs_user()
perf/x86/64: Do report user_regs->cx while we are in syscall, in get_regs_user()
perf/x86/64: Do not guess user_regs->cs, ss, sp in get_regs_user()
x86/asm/entry/32: Tidy up JNZ instructions after TESTs
x86/asm/entry/64: Reduce padding in execve stubs
x86/asm/entry/64: Remove GET_THREAD_INFO() in ret_from_fork
x86/asm/entry/64: Simplify jumps in ret_from_fork
x86/asm/entry/64: Remove a redundant jump
x86/asm/entry/64: Optimize [v]fork/clone stubs
x86/asm/entry: Zero EXTRA_REGS for stub32_execve() too
x86/asm/entry/64: Move stub_x32_execvecloser() to stub_execveat()
x86/asm/entry/64: Use common code for rt_sigreturn() epilogue
x86/asm/entry/64: Add forgotten CFI annotation
x86/asm/entry/irq: Simplify interrupt dispatch table (IDT) layout
x86/asm/entry/64: Move opportunistic sysret code to syscall code path
x86, selftests: Add sigreturn selftest
x86/alternatives: Guard NOPs optimization
x86/asm/entry: Clear EXTRA_REGS for all executable formats
x86/signal: Remove pax argument from restore_sigcontext
...
This update adds install and packaging tools developed on top
of back-end shared logic enhancemnets to run and install tests.
In addition several timer tests are added.
- New timer tests from John Stultz
- rtc test from Prarit Bhargava
- Enhancements to un and install tests from Michael Ellerman
- Install and packaging tools from Shuah Khan
- Cross-compilation enablement from Tyler Baker
- A couple of bug fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=M1zT
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"This is a milestone update in a sense. Several new tests and install
and packaging support is added in this update.
This update adds install and packaging tools developed on top of
back-end shared logic enhancemnets to run and install tests. In
addition several timer tests are added.
- New timer tests from John Stultz
- rtc test from Prarit Bhargava
- Enhancements to un and install tests from Michael Ellerman
- Install and packaging tools from Shuah Khan
- Cross-compilation enablement from Tyler Baker
- A couple of bug fixes"
* tag 'linux-kselftest-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (42 commits)
ftracetest: Do not use usleep directly
selftest/mqueue: enable cross compilation
selftest/ipc: enable cross compilation
selftest/memfd: include default header install path
selftest/mount: enable cross compilation
selftest/memfd: enable cross compilation
kselftests: timers: Make set-timer-lat fail more gracefully for !CAP_WAKE_ALARM
selftests: Change memory on-off-test.sh name to be unique
selftests: change cpu on-off-test.sh name to be unique
selftests/mount: Make git ignore all binaries in mount test suite
kselftests: timers: Reduce default runtime on inconsistency-check and set-timer-lat
ftracetest: Convert exit -1 to exit $FAIL
ftracetest: Cope properly with stack tracer not being enabled
tools, update rtctest.c to verify passage of time
Documentation, split up rtc.txt into documentation and test file
selftests: Add tool to generate kselftest tar archive
selftests: Add kselftest install tool
selftests: Set CC using CROSS_COMPILE once in lib.mk
selftests: Add install support for the powerpc tests
selftests/timers: Use shared logic to run and install tests
...
Check that a syscall made during an active transaction will fail with
the correct failure code and that one made during a suspended
transaction will succeed.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move get_auxv_entry() from pmu/lib.c up to harness.c in order to make
it available to other tests.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is my sigreturn test, added mostly unchanged from its old
home. It exercises the sigreturn(2) syscall, specifically
focusing on its interactions with various IRET corner cases.
It tests for correct behavior in several areas that were
historically dangerously buggy. For example, it exercises espfix
on kernels of both bitnesses under various conditions, and it
contains testcases for several now-fixed bugs in IRET error
handling.
If you run it on older kernels without the fixes, your system will
crash. It probably won't eat your data in the process.
There is no released kernel on which the sigreturn_64 test will
pass, but it passes on tip:x86/asm.
I plan to switch to lib.mk for Linux 4.2.
I'm not using the ksft_ helpers at all yet. I can do that later.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/89d10b76b92c7202d8123654dc8d36701c017b3d.1428386971.git.luto@kernel.org
[ Fixed empty format string GCC build warning in trivial_32bit_program.c ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The usleep is only provided on distros from Redhat so running ftracetest
on other distro resulted in failures due to the missing usleep.
The reason of using [u]sleep in the test was to generate (scheduler)
events. It can be done various ways like this:
yield() { ping localhost -c 1 || sleep .001 || usleep 1 || sleep 1; }
For more information to the history of this patch, please refer to:
Link: http://lkml.kernel.org/r/1427329943-16896-1-git-send-email-namhyung@kernel.org
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Reported-by: Luis Henriques <luis.henriques@canonical.com>
Suggested-by: Pádraig Brady <P@draigBrady.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use the CC variable instead of hard coding gcc.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Include the default path for INSTALL_HDR_PATH to make it less intrusive when
cross building.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Use the CC variable instead of hard coding gcc. Also clean up the compiler
options by creating a CFLAGS variable.
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The set-timer-lat test fails when testing CLOCK_BOOTTIME_ALARM
or CLOCK_REALTIME_ALARM when the user isn't running as root or
with CAP_WAKE_ALARM.
So this patch improves the error checking so we report the
issue more clearly and continue rather then reporting a failure.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
cpu and memory hotplug scripts use the same name. Change
memory on-off-test.sh to mem-on-off-test.sh.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpu and memory hotplug scripts use the same name. Change
cpu on-off-test.sh to cpu-on-off-test.sh.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch includes the mount test binaries into the .gitignore
file listing in their respective directories. This will make sure
that git ignores all of these test binaries when displaying status.
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For the default run_timers target, the timers tests takes the
majority of kselftests runtime.
So this patch reduces the default runtime for inconsistentcy-check
and set-timer-lat, which reduced the runtime almost in half.
Before: 11m48.629s
After: 6m47.723s
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
POSIX says that exit takes an unsigned integer between 0 and 255, so
using -1 doesn't work on POSIX shells.
There is already a well-defined failure code, $FAIL (1), so use that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
If the stack tracer (CONFIG_STACK_TRACER) is disabled, the
fgraph-filter-stack test blows chunks:
[8] ftrace - function graph filters with stack tracer [FAIL]
+ reset_tracer
+ echo nop
./ftracetest: 19: /home/michael/selftests/ftrace/test.d/ftrace/fgraph-filter-stack.tc:
cannot create /proc/sys/kernel/stack_tracer_enabled: Directory nonexistent
Fix it by checking if the proc file exists before echoing to it. With
the patch applied it fails correctly with:
[8] ftrace - function graph filters with stack tracer [UNSUPPORTED]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a test of the switch_endian() syscall we added in the previous
commit.
We test it by calling the endian switch syscall, and then executing some
code in the other endian to check everything went as expected. That code
checks registers we expect to be maintained are. If the endian switch
failed to happen that code sequence will be illegal and cause the test
to abort.
We then switch back to the original endian, do the same checks and
finally write a success message and exit(0).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Changes permitting use of call_rcu() and friends very early in
boot, for example, before rcu_init() is invoked.
- Miscellaneous fixes.
- Add in-kernel API to enable and disable expediting of normal RCU
grace periods.
- Improve RCU's handling of (hotplug-) outgoing CPUs.
Note: ARM support is lagging a bit here, and these improved
diagnostics might generate (harmless) splats.
- NO_HZ_FULL_SYSIDLE fixes.
- Tiny RCU updates to make it more tiny.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rtctest.c checks to see if PIE is functioning by testing if 20 interrupts occur
at rates from 2HZ to 64HZ. While this check is good, it does not check to
see if the correct amount of time has actually passed. This misses
situations where the RTC may be operating at a higher or lower frequency
than expected.
This patch introduces a simple check to verify if the time passed is
less than 10% of what was programmed into the RTC.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch splits rtc.txt into two separate files, one for the
documentation itself, and the other for the rtctest.c file. The rtctest
file is moved into the kernel tools/testing/selftests/timers directory.
This will make automated testing easier. Note that the only difference in
the rtc.txt file is that the location of the rtctest.c file has changed.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: John Stultz <john.stultz@linaro.org>
Cc: corbet@lwn.net
Cc: rtc-linux@googlegroups.com
Cc: linux-doc@vger.kernel.org
Cc: a.zummo@towertech.it
Cc: prarit@redhat.com
Cc: john.stultz@linaro.org
Cc: shuahkh@osg.samsung.com
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
gen_kselftest_tar.sh tool generates kselftest tar archive. This tool
supports uncompressed tar, gz, bz, and xz compression formats and the
default compression format is gzip. This tool runs kselftest install
tool as its back-end.
Usage:
cd tools/testing/selftests
./gen_kselftest_tar [ tar | targz | tarbz2 | tarxz ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
kselftest_install.sh tool installs selftests in default location
which is tools/testing/selftests/kselftest or an user specified
location. This tool invokes back-end selftests install target with
the install location.
Usage:
cd tools/testing/selftests
./kselftest_install.sh [ install_dir ]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This avoids repeating the logic in every Makefile. We mimic the
top-level Makefile and use $(CROSS_COMPILE)gcc.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The bulk of the selftests are actually below the powerpc sub directory.
This adds support for installing them, when on a powerpc machine, or if
ARCH and CROSS_COMPILE are set appropriately.
This is a little more complicated because of the sub directory structure
under powerpc, but much of the common logic in lib.mk is still used. The
net effect of the patch is still a reduction in code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change the timers Makefile to make use of shared run and install logic
in lib.mk. Destructive tests are installed but not run by default.
Add a new variable, TEST_PROGS_EXTENDED, which is a list of extra
programs to install, but which are not run by the default run_tests
logic.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
In order to keep the kselftest Makefiles simpler, set the threadtest
default values to the ones used in standard run_tests
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Several tests that rely on implicit build rules fail to build,
when invoked from the main Makefile kselftest target. These
failures are due to --no-builtin-rules and --no-builtin-variables
options set in the inherited MAKEFLAGS.
--no-builtin-rules eliminates the use of built-in implicit rules
and --no-builtin-variables is for not defining built-in variables.
These two options override the use of implicit rules resulting in
build failures. In addition, inherited LDFLAGS result in build
failures and there is no need to define LDFLAGS. Clear LDFLAGS
and MAKEFLAG when make is invoked from the main Makefile kselftest
target. Fixing this at selftests Makefile avoids changing the main
Makefile and keeps this change self contained at selftests level.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
This patch changes the name of the make variable TARGETS, to prevent it
from colliding with a value set by the user on the command line (as they
are recommended to do by tools/testing/selftests/README.txt).
Without this patch, "make -C tools/testing/selftests TARGETS=powerpc"
will fail.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The goal is to verify vphn_unpack_associativity() parses VPHN numbers
correctly. We feed it with a variety of input values and compare with
expected results.
PAPR+ does not say much about VPHN parsing: I came up with a list of
tests that check many simple cases and some corner ones. I wouldn't
dare to say the list is exhaustive though.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
[mpe: Rework harness logic, rename to test-vphn, add -m64]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The recent change to remove the vrX defines exposed the fact that we are
building the copyloops tests without altivec enabled. It depends on the
toolchain as to whether altivec is on by default or not, so it only
breaks on some toolchains. But we should always enable it.
Fixes: c2ce6f9f3d ("powerpc: Change vrX register defines to vX to match gcc and glibc")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As our various loops (copy, string, crypto etc) get more complicated,
we want to share implementations between userspace (eg glibc) and
the kernel. We also want to write userspace test harnesses to put
in tools/testing/selftest.
One gratuitous difference between userspace and the kernel is the
VMX register definitions - the kernel uses vrX whereas both gcc and
glibc use vX.
Change the kernel to match userspace.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds make install support to selftests. The basic usage is:
$ cd tools/testing/selftests
$ make install
That installs into tools/testing/selftests/install, which can then be
copied where ever necessary.
The install destination is also configurable using eg:
$ INSTALL_PATH=/mnt/selftests make install
The implementation uses two targets in the child makefiles. The first
"install" is expected to install all files into $(INSTALL_PATH).
The second, "emit_tests", is expected to emit the test instructions (ie.
bash script) on stdout. Separating this from install means the child
makefiles need no knowledge of the location of the test script.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a Make include file which most selftests can then include to
get the run_tests logic.
On its own this has the advantage of some reduction in repetition, and
also means the pass/fail message is defined in fewer places.
However the key advantage is it will allow us to implement install very
simply in a subsequent patch.
The default implementation just executes each program in $(TEST_PROGS).
We use a variable to hold the default implementation of $(RUN_TESTS)
because that gives us a clean way to override it if necessary, ie. using
override. The mount, memory-hotplug and mqueue tests use that to provide
a different implementation.
Tests are not run via /bin/bash, so if they are scripts they must be
executable, we add a+x to several.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add test to validate mqueue timeout latency from the timetest suite
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.
It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The posix_timers.c test has a loop that tries to keep it in
kernel space, repeatedly calling brk(). However, it doesn't
check the return value, which causes warnings.
This patch adds a err value which captures the return value
and modifies the test so it will quit if a failure occurs.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Try to streamline the makefile so its easier to add timer/timekeeping
tests.
Also adds support for the CROSS_COMPILE variable.
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit sets CONFIG_RCU_TORTURE_TEST_SLOW_INIT=y, but leaves the
default time zero. This can be overridden by passing the
"--bootargs rcutree.gp_init_delay=1" argument to kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On systems which don't implement sys_execveat(), this test produces a
lot of output.
Add a check at the beginning to see if the syscall is present, and if
not just note one error and return.
When we run on a system that doesn't implement the syscall we will get
ENOSYS back from the kernel, so change the logic that handles
__NR_execveat not being defined to also use ENOSYS rather than -ENOSYS.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: David Drysdale <drysdale@google.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
o Added timings to various parts of the test (build, install,
boot, tests) and report them so that the users can keep
track of changes.
o Josh Poimboeuf fixed the console output to work better with
virtual machine targets.
o Various clean ups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJU2VT1AAoJEEjnJuOKh9ldfgMH/A4N2zEzRDx/FGgvFVBF/NOl
AlwddMyyUsjolL9w+UGUTtXtyyWZFJWvuELaLYwfMF/qI1S+eAZeRQVStQ9UZhj0
ehjKj5ct8EKVCXgR6GUWvCgzLEbK5AQRPRKAkK9KGDmSdzRP22MU7sFj1ZyXGQCh
qqHMSnShXiXzEipqg6Oee8gC1IQIjskulcbB4IqGNMYNN/WJXiVGZUVsMLatb09i
HXz+8P2lh6u1MWb3EX0YvvrZohKgyYf/17V3Hm0JBxLEAFNOkD6q9BqBCRi9LvcU
5vWA+vcvT6+wjXICL0UmiSZbU/JBD0D6vDkGIAqdluaAvf31gsuNTUrLx6RbW10=
=/rWI
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
"The following ktest updates were done:
o Added timings to various parts of the test (build, install, boot,
tests) and report them so that the users can keep track of changes.
o Josh Poimboeuf fixed the console output to work better with virtual
machine targets.
o Various clean ups and fixes"
* tag 'ktest-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Place quotes around item variable
ktest: Cleanup terminal on dodie() failure
ktest: Print build,install,boot,test times at success and failure
ktest: Enable user input to the console
ktest: Give console process a dedicated tty
ktest: Rename start_monitor_and_boot to start_monitor_and_install
ktest: Show times for build, install, boot and test
ktest: Restore tty settings after closing console
ktest: Add timings for commands
Including:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath device
tree content, e300 machine check support, t1040 corenet error reporting,
and various cleanups and fixes."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xDU3
-----END PGP SIGNATURE-----
Merge tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux
Pull powerpc updates from Michael Ellerman:
- Update of all defconfigs
- Addition of a bunch of config options to modernise our defconfigs
- Some PS3 updates from Geoff
- Optimised memcmp for 64 bit from Anton
- Fix for kprobes that allows 'perf probe' to work from Naveen
- Several cxl updates from Ian & Ryan
- Expanded support for the '24x7' PMU from Cody & Sukadev
- Freescale updates from Scott:
"Highlights include 8xx optimizations, some more work on datapath
device tree content, e300 machine check support, t1040 corenet
error reporting, and various cleanups and fixes"
* tag 'powerpc-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (102 commits)
cxl: Add missing return statement after handling AFU errror
cxl: Fail AFU initialisation if an invalid configuration record is found
cxl: Export optional AFU configuration record in sysfs
powerpc/mm: Warn on flushing tlb page in kernel context
powerpc/powernv: Add OPAL soft-poweroff routine
powerpc/perf/hv-24x7: Document sysfs event description entries
powerpc/perf/hv-gpci: add the remaining gpci requests
powerpc/perf/{hv-gpci, hv-common}: generate requests with counters annotated
powerpc/perf/hv-24x7: parse catalog and populate sysfs with events
perf: define EVENT_DEFINE_RANGE_FORMAT_LITE helper
perf: add PMU_EVENT_ATTR_STRING() helper
perf: provide sysfs_show for struct perf_pmu_events_attr
powerpc/kernel: Avoid initializing device-tree pointer twice
powerpc: Remove old compile time disabled syscall tracing code
powerpc/kernel: Make syscall_exit a local label
cxl: Fix device_node reference counting
powerpc/mm: bail out early when flushing TLB page
powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
perf/powerpc: reset event hw state when adding it to the PMU
powerpc/qe: Use strlcpy()
...
Seems that some of the new console logic causes doprint to possibly
get evaluated. When printing a commit message that contains parenthesis,
it fails with a shell parsing error.
This gets fixed when we add quotes around the $item variable, and prevent
it from being evaluated by any shell commands.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If dodie() is called with the console open, restore the terminal's
original settings before dying.
Link: http://lkml.kernel.org/r/20150130025453.GB20952@treble.redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Since both success and failure may shortcut and exit ktest, it is better
to print the status times there too. Once times are printed, the values
for the times are reset, so they will not print more than once.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The function start_monitor_and_boot is a misnomer. It use to, but
now it starts the monitor and installs. It does not boot. Rename it
before I get confused by it again.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Seeing the times for how long a build, install, reboot and the
test takes is helpful for analyzing the test process. Seeing
how different changes affect the timings.
Show the build, install, boot and test times when at the end of
the test, or between each interval for tests that do those
mulitple times (like bisect and patchcheck).
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When ktest runs the console program as a child process, the parent and
child share the same tty for stdin and stderr. This is problematic when
using a libvirt target. The "virsh console" program makes a lot of
changes to the tty settings, making ktest's output hard to read
(carriage returns don't work). After ktest exits, the terminal is
unusable (CRs broken, stdin isn't echoed).
I think the best way to fix this issue would be to create a
pseudoterminal (pty pair) so the child process would have a dedicated
tty, and then use pipes to connect the two ttys. I'm not sure if that's
overkill, but it's far beyond my current Perl abilities.
This patch is a much easier way to (partially) fix this issue. It saves
the tty settings before opening the console and restores them after
closing it. There are still a few places where ktest prints mangled
output while the console is open, but the output is much more legible
overall, and the terminal works just fine after ktest exits.
Link: http://lkml.kernel.org/r/1bb89abc0025cf1d6da657c7ba58bbeb4381a515.1422382008.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
I find that I usually like to see how long a make or other command takes,
and adding a start and end time and reporting how long each command runs
(in seconds) is helpful.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch includes all of the powerpc test binaries into the .gitignore
file listing in their respective directories. This will make sure that
git ignores all of these test binaries when displaying status.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU updates from Paul E. McKenney:
- Documentation updates.
- Miscellaneous fixes.
- Preemptible-RCU fixes, including fixing an old bug in the
interaction of RCU priority boosting and CPU hotplug.
- SRCU updates.
- RCU CPU stall-warning updates.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run. This can fool the developer into thinking
that this failed run actually completed correctly. This commit therefore
overwrites the console.log file just before launching qemu.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed. This commit therefore adds both to the
default qemu command line.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations. This commit therefore
uses $NF instead of $12 to select the last (%idle) column.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor. This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.
It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks. In practice, memory misordering
(by both compiler and CPU) can result in false positives. However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing. This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
add -lrt to fix undefined reference to `clock_gettime'
error seen when the test is compiled using gcc 4.6.4.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We can't use a char type to check for a negative return value since char
isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on
ARM.
Signed-off-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When the shell fails to invoke a script because its path name
is too long (ENAMETOOLONG), most shells return 127 to indicate
command not found. However, some systems report 126 (which POSIX
suggests should indicate a non-executable file) for this case,
so allow that too.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Drysdale <drysdale@google.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected. This commit therefore adds a check for this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On 32-bit:
execveat.c: In function 'check_execveat_pathmax':
execveat.c:183: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t'
execveat.c:187: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t'
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This list is supposed to be sorted, to reduce patch collisions.
Cc: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull user namespace related fixes from Eric Biederman:
"As these are bug fixes almost all of thes changes are marked for
backporting to stable.
The first change (implicitly adding MNT_NODEV on remount) addresses a
regression that was created when security issues with unprivileged
remount were closed. I go on to update the remount test to make it
easy to detect if this issue reoccurs.
Then there are a handful of mount and umount related fixes.
Then half of the changes deal with the a recently discovered design
bug in the permission checks of gid_map. Unix since the beginning has
allowed setting group permissions on files to less than the user and
other permissions (aka ---rwx---rwx). As the unix permission checks
stop as soon as a group matches, and setgroups allows setting groups
that can not later be dropped, results in a situtation where it is
possible to legitimately use a group to assign fewer privileges to a
process. Which means dropping a group can increase a processes
privileges.
The fix I have adopted is that gid_map is now no longer writable
without privilege unless the new file /proc/self/setgroups has been
set to permanently disable setgroups.
The bulk of user namespace using applications even the applications
using applications using user namespaces without privilege remain
unaffected by this change. Unfortunately this ix breaks a couple user
space applications, that were relying on the problematic behavior (one
of which was tools/selftests/mount/unprivileged-remount-test.c).
To hopefully prevent needing a regression fix on top of my security
fix I rounded folks who work with the container implementations mostly
like to be affected and encouraged them to test the changes.
> So far nothing broke on my libvirt-lxc test bed. :-)
> Tested with openSUSE 13.2 and libvirt 1.2.9.
> Tested-by: Richard Weinberger <richard@nod.at>
> Tested on Fedora20 with libvirt 1.2.11, works fine.
> Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
> Ok, thanks - yes, unprivileged lxc is working fine with your kernels.
> Just to be sure I was testing the right thing I also tested using
> my unprivileged nsexec testcases, and they failed on setgroup/setgid
> as now expected, and succeeded there without your patches.
> Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com>
> I tested this with Sandstorm. It breaks as is and it works if I add
> the setgroups thing.
> Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :("
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Unbreak the unprivileged remount tests
userns; Correct the comment in map_write
userns: Allow setting gid_maps without privilege when setgroups is disabled
userns: Add a knob to disable setgroups on a per user namespace basis
userns: Rename id_map_mutex to userns_state_mutex
userns: Only allow the creator of the userns unprivileged mappings
userns: Check euid no fsuid when establishing an unprivileged uid mapping
userns: Don't allow unprivileged creation of gid mappings
userns: Don't allow setgroups until a gid mapping has been setablished
userns: Document what the invariant required for safe unprivileged mappings.
groups: Consolidate the setgroups permission checks
mnt: Clear mnt_expire during pivot_root
mnt: Carefully set CL_UNPRIVILEGED in clone_mnt
mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers.
umount: Do not allow unmounting rootfs.
umount: Disallow unprivileged mount force
mnt: Update unprivileged remount test
mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJUj0wTAAoJEAsCRMQNDUMc/jEQAIcMbtui9jj2B7gfgYpRHX/7
osfaYgjm2aMc0ccC8hn2WVotnhR2tcg3nOaYRf8/VssNhcQYoAReN2+nHp0LZ/kl
A8gdh7xq79asM9fZ8pkrvqyyeyBXAZsfQnwOfu1iDa6h0GGGzz7MJZ+f2ky1bPJs
zf4P2JTpr5jh6lflU1mY+STXOcFojHfy5wr9zgGpGUGxXihiUyVjv31+HbZaVoRV
7khTuIMPIIkyVXQKTJSJpqZkShoKj6DVResIjEai9oH2LM1WbXVDqitgsEdyErOG
jm9aF0FRdQm3chXN5KKgOvIcatdhP+kypis/3zSb7zO0aAtIVkNo4PSEaYoC9Huz
BfFKJbm+j+3alEb/51R0XCcj04qcjhhbx+vhEQpucGb1dnT9C9kRSCYDZH/o0+YZ
ozgGaiH4IGxoZraxL2QuwxDs5/x8QzAOg/p/bgztgIVkjvjLk8G8+wTo21946vGr
lpE/fz3DILxL1mQNPjohjFm/FSXb94fQGWb4RQ34x/sJJgus7bz7ftzaeVNqBSbU
PILJG2QuwT1xxEV44eXTCQycQTZQ/v8o2R0QzjzqR5hU7Oz6d86Rt+ijNO+JFWuA
kFCm1EdhSirzZ5R2V3IjQKJGhwXZMs4+BINA14FP9zik1xYSH2Sx+o2fWJ335rzm
geA73v1btvT1xQ0mrI+K
=DL3K
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"kselftest updates for 3.19-rc1:
- kcmp test include file cleanup
- kcmp change to build on all architectures
- A light weight kselftest framework that provides a set of
interfaces for tests to use to report results. In addition,
several tests are updated to use the framework.
- A new runtime system size test that prints the amount of RAM that
the currently running system is using"
* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftest: size: Add size test for Linux kernel
selftests/kcmp: Always try to build the test
selftests/kcmp: Don't include kernel headers
kcmp: Move kcmp.h into uapi
selftests/timers: change test to use ksft framework
selftests/kcmp: change test to use ksft framework
selftests/ipc: change test to use ksft framework
selftests/breakpoints: change test to use ksft framework
selftests: add kselftest framework for uniform test reporting
selftests/user: move test out of Makefile into a shell script
selftests/net: move test out of Makefile into a shell script
Merge second patchbomb from Andrew Morton:
- the rest of MM
- misc fs fixes
- add execveat() syscall
- new ratelimit feature for fault-injection
- decompressor updates
- ipc/ updates
- fallocate feature creep
- fsnotify cleanups
- a few other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits)
cgroups: Documentation: fix trivial typos and wrong paragraph numberings
parisc: percpu: update comments referring to __get_cpu_var
percpu: update local_ops.txt to reflect this_cpu operations
percpu: remove __get_cpu_var and __raw_get_cpu_var macros
fsnotify: remove destroy_list from fsnotify_mark
fsnotify: unify inode and mount marks handling
fallocate: create FAN_MODIFY and IN_MODIFY events
mm/cma: make kmemleak ignore CMA regions
slub: fix cpuset check in get_any_partial
slab: fix cpuset check in fallback_alloc
shmdt: use i_size_read() instead of ->i_size
ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments
ipc/msg: increase MSGMNI, remove scaling
ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM
ipc/sem.c: change memory barrier in sem_lock() to smp_rmb()
lib/decompress.c: consistency of compress formats for kernel image
decompress_bunzip2: off by one in get_next_block()
usr/Kconfig: make initrd compression algorithm selection not expert
fault-inject: add ratelimit option
ratelimit: add initialization macro
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Pq+D
-----END PGP SIGNATURE-----
Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6
Pull documentation update from Jonathan Corbet:
"Here's my set of accumulated documentation changes for 3.19.
It includes a couple of additions to the coding style document, some
fixes for minor build problems within the documentation tree, the
relocation of the kselftest docs, and various tweaks and additions.
A couple of changes reach outside of Documentation/; they only make
trivial comment changes and I did my best to get the required acks.
Complete with a shiny signed tag this time around"
* tag 'docs-for-linus' of git://git.lwn.net/linux-2.6:
kobject: grammar fix
Input: xpad - update docs to reflect current state
Documentation: Build mic/mpssd only for x86_64
cgroups: Documentation: fix wrong cgroupfs paths
Documentation/email-clients.txt: add info about Claws Mail
CodingStyle: add some more error handling guidelines
kselftest: Move the docs to the Documentation dir
Documentation: fix formatting to make 's' happy
Documentation: power: Fix typo in Documentation/power
Documentation: vm: Add 1GB large page support information
ipv4: add kernel parameter tcpmhash_entries
Documentation: Fix a typo in mailbox.txt
treewide: Fix typo in Documentation/DocBook/device-drivers
CodingStyle: Add a chapter on conditional compilation
A security fix in caused the way the unprivileged remount tests were
using user namespaces to break. Tweak the way user namespaces are
being used so the test works again.
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
o Fix handling the make kernelrelease change
o Fix make_min_config that was broken by new bisect_config changes
o Allow tests to undefine default options (not just being able to override
them)
o Print name of test (if defined) to start of test output
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUheY3AAoJEEjnJuOKh9ld+CgH/16NxltuIVFMTDB+I7AP/ixV
YP2m4dGn0wrzg8GhZNJX7x9irh8Shg5da4mjqH163qylNfQl7QuALzs5c7B3ZDv3
dQa2GMR34/bUbcqejrZm7fcwRH8yw1E88hAs71CNM+PMW1AAe8CBth2ogCXC/V8N
uln7Fr0aS3Y/sPxWzkCp4Y8ZAsoRMei3igfnJUPu0a1p7pyKaN0ne060S5znWYwl
8fW4DACR1EppMmfwdslORN9miPol4nuBQICmqNM6shtJaef6yb9aErSiTTT4m4PK
RIpWZasmosKBIeIkTXWxLhr3liEFTMm3BsflD+YUnIM7cLFziHGDp6ThH3TwwSo=
=Y3vY
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest changes from Steven Rostedt:
"The following ktest updates were done:
- Fix handling the make kernelrelease change
- Fix make_min_config that was broken by new bisect_config changes
- Allow tests to undefine default options (not just being able to
override them)
- Print name of test (if defined) to start of test output"
* tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add back "tail -1" to kernelrelease make
ktest: Add name to running title
ktest: Allow tests to undefine default options
ktest: Fix make_min_config to handle new assign_configs call
ktest: Use make -s kernelrelease
o Added kprobes on ftrace testcase
o Sort test cases
o Add file to hold helper functions
o Use logfile name supported by busybox's mktemp
o Clear trace buffer after running kprobe test
o Fix show descriptions when run on dash shell
o Add --verbose option for showing echo output
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbSvAAoJEEjnJuOKh9ldB84H+gNuE2PPvsxmgSxFP0bdo+Uw
k/8C2QBU6xLXZFZvqXnH7P0gLP2OIjpOBOTKt+yjkB/Elm+XnMVV1Xy+k7VLBiMD
g+DRoIcpJL2dOy/D8t/P4SjVNXt4Btwxf/tCTabbubLc+aBmvkEG4DL2Vk/Xl5+Y
XH1dBgYvI9irAxgnYpBnPlN7WIWg1+WCshdOtqkNGRuyJ1G9gn0VlxGmNF7B+0ye
cjFj19loPMGzmYBDgGCa9ypQHEP1F97t+WUEDrwCZsXLtaA7Z4bumXTrxKQWsmdT
bDZQTEFcQ9EYQGvqbaz+nHb94P8cyFrSNvSiAAqhuc2ZqigYWUYDEvFjYxSSGAE=
=eiD2
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace self-test updates from Steven Rostedt:
"Updates for the ftrace self tests:
- Added kprobes on ftrace testcase
- Sort test cases
- Add file to hold helper functions
- Use logfile name supported by busybox's mktemp
- Clear trace buffer after running kprobe test
- Fix show descriptions when run on dash shell
- Add --verbose option for showing echo output"
* tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Add --verbose option for showing echo output
ftracetest: Fix to show descriptions on dash
ftracetest: Add basic event tracing test cases
ftracetest: Clear trace buffer after running kprobe testcases
ftracetest: Use logfile name supported by busybox's mktemp
ftracetest: Add a couple of ftrace test cases
ftracetest: Add functions file that holds helper functions
ftracetest: Sort testcases
ftracetest: Add kprobes on ftrace testcase
Add --verbose/-v option for showing echo output in testcases.
This is good for checking the progress of testcases which
take a longer time to run.
To implement this feature, all the testcase failures are
captured in ftracetest and send signal to set SIG_RESULT=FAIL.
Link: http://lkml.kernel.org/r/20141204194123.7376.22964.stgit@localhost.localdomain
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftracetest doesn't show testcase's descriptions when
it is executed on dash. This fixes that to show the
descriptions on dash correctly by passing it via a variable
instead of directly passing the grep command output.
Link: http://lkml.kernel.org/r/20141204194116.7376.78940.stgit@localhost.localdomain
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This test shows the amount of memory used by the system.
Note that this is dependent on the user-space that is loaded
when this program runs. Optimally, this program would be
run as the init program itself.
The program is optimized for size itself, to avoid conflating
its own execution with that of the system software.
The code is compiled statically, with no stdlibs. On my x86_64 system,
this results in a statically linked binary of less than 5K.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Don't prevent the test building on non-x86. Just try and build it and
let the chips fall where they may.
Add support for CROSS_COMPILE while we're at it. Also we don't need a
custom rule for building kcmp_test.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The kcmp test mucks with the include path to bring in the kernel
headers, and x86 headers too for reasons that are not clear.
Now that kcmp.h is exported none of that should be necessary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- MNT_NODEV should be irrelevant except when reading back mount flags,
no longer specify MNT_NODEV on remount.
- Test MNT_NODEV on devpts where it is meaningful even for unprivileged mounts.
- Add a test to verify that remount of a prexisting mount with the same flags
is allowed and does not change those flags.
- Cleanup up the definitions of MS_REC, MS_RELATIME, MS_STRICTATIME that are used
when the code is built in an environment without them.
- Correct the test error messages when tests fail. There were not 5 tests
that tested MS_RELATIME.
Cc: stable@vger.kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Also, adjust the formatting a bit, and expand the section about using
TARGETS= on the make command line.
Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 52d21580b3 "ktest: Use make -s kernelrelease" fixed commit
7ff525712a "kbuild: fake the "Entering directory ..." message more simply"
as that commit added output after the make kernelrelease. But there's still
some build scripts that are used by ktest that has output before the make
is executed, and requires that only the last line is printed.
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of just showing the test type of test in the start of the
test, like this:
RUNNING TEST 1 of 26 with option build defconfig
Add the name (if it is defined) as well, like this:
RUNNING TEST 1 of 26 (arm64 aarch64-linux) with option build defconfig
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tests can set options that override the default ones. But if a test
tries to undefine a default option, it is simply ignored and the
default option stays as is.
For example, if you want to have a test that defines no MIN_CONFIG
then the test should be able to do that with:
TEST_START
MIN_CONFIG =
Which should make MIN_CONFIG not defined for that test. But the way
the code currently works, undefined options in tests are dropped.
This is because the NULL options are evaluated during the reading of
the config file and since one can disable default options in the default
section with this method, it is evaluated there (the option turns to a
undef). But undef options in the test section mean to use the default
option.
To fix this, keep the empty string in the option during the reading
of the config file, and then evaluate it when running the test. This
will allow tests to null out default options.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 6071c22e17 "ktest: Rewrite the config-bisect to actually work"
fixed the config-bisect to work nicely but in doing so it broke
make_min_config by changing the way assign_configs works.
The assign_configs function now adds the config to the hash even if
it is disabled, but changes the hash value to be that of the
line "# CONFIG_FOO is not set". Unfortunately, the make_min_config
test only checks to see if the config is removed. It now needs to
check if the config is in the hash and not set to be disabled.
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The previous tail -1 broke with commit 7ff525712a ("kbuild: fake the
"Entering directory ..." message more simply")
Link: http://lkml.kernel.org/r/20141022194408.GA20989@pobox.suse.cz
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Change ipc test to use kselftest framework to report
test results. With this change this test exits with
EXIT_FAIL instead of -errno. Changed print errno in
test fail messages to not loose that information.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add kselftest framework for tests to use. This is a light
weight framework provides a set of interfaces to report test
results. Tests can use these interfaces to report pass, and
fail cases as well as when failure is due to configuration
problems such as missing modules, or when a test that is should
fail, fails as expected, and a test that should fail, passes.
The framework uses POSIX standard return codes for reporting
results to address the needs of users that want to run the kernel
selftests from their user-space test suites and want to know why a
test failed. In addition, the framework includes interfaces to use
to report test statistics on number of tests passed and failed.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Currently user copy test is run from the Makefile. Move it out
of the Makefile to be run from a shell script to allow the test
to be run as stand-alone test, in addition to allowing the test
run from a make target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Pull networking fixes from David Miller:
1) sunhme driver lacks DMA mapping error checks, based upon a report by
Meelis Roos.
2) Fix memory leak in mvpp2 driver, from Sudip Mukherjee.
3) DMA memory allocation sizes are wrong in systemport ethernet driver,
fix from Florian Fainelli.
4) Fix use after free in mac80211 defragmentation code, from Johannes
Berg.
5) Some networking uapi headers missing from Kbuild file, from Stephen
Hemminger.
6) TUN driver gets csum_start offset wrong when VLAN accel is enabled,
and macvtap has a similar bug, from Herbert Xu.
7) Adjust several tunneling drivers to set dev->iflink after registry,
because registry sets that to -1 overwriting whatever we did. From
Steffen Klassert.
8) Geneve forgets to set inner tunneling type, causing GSO segmentation
to fail on some NICs. From Jesse Gross.
9) Fix several locking bugs in stmmac driver, from Fabrice Gasnier and
Giuseppe CAVALLARO.
10) Fix spurious timeouts with NewReno on low traffic connections, from
Marcelo Leitner.
11) Fix descriptor updates in enic driver, from Govindarajulu
Varadarajan.
12) PPP calls bpf_prog_create() with locks held, which isn't kosher.
Fix from Takashi Iwai.
13) Fix NULL deref in SCTP with malformed INIT packets, from Daniel
Borkmann.
14) psock_fanout selftest accesses past the end of the mmap ring, fix
from Shuah Khan.
15) Fix PTP timestamping for VLAN packets, from Richard Cochran.
16) netlink_unbind() calls in netlink pass wrong initial argument, from
Hiroaki SHIMODA.
17) vxlan socket reuse accidently reuses a socket when the address
family is different, so we have to explicitly check this, from
Marcelo Lietner.
18) Fix missing include in nft_reject_bridge.c breaking the build on ppc
and other architectures, from Guenter Roeck.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits)
vxlan: Do not reuse sockets for a different address family
smsc911x: power-up phydev before doing a software reset.
lib: rhashtable - Remove weird non-ASCII characters from comments
net/smsc911x: Fix delays in the PHY enable/disable routines
net/smsc911x: Fix rare soft reset timeout issue due to PHY power-down mode
netlink: Properly unbind in error conditions.
net: ptp: fix time stamp matching logic for VLAN packets.
cxgb4 : dcb open-lldp interop fixes
selftests/net: psock_fanout seg faults in sock_fanout_read_ring()
net: bcmgenet: apply MII configuration in bcmgenet_open()
net: bcmgenet: connect and disconnect from the PHY state machine
net: qualcomm: Fix dependency
ixgbe: phy: fix uninitialized status in ixgbe_setup_phy_link_tnx
net: phy: Correctly handle MII ioctl which changes autonegotiation.
ipv6: fix IPV6_PKTINFO with v4 mapped
net: sctp: fix memory leak in auth key management
net: sctp: fix NULL pointer dereference in af->from_addr_param on malformed packet
net: ppp: Don't call bpf_prog_create() in ppp_lock
net/mlx4_en: Advertize encapsulation offloads features only when VXLAN tunnel is set
cxgb4 : Fix bug in DCB app deletion
...
The while loop in sock_fanout_read_ring() checks mmap region
bounds after access, causing it to segfault. Fix it to check
count before accessing header->tp_status. This problem can be
reproduced consistently when the test in run as follows:
make -C tools/testing/selftests TARGETS=net run_tests
or
make run_tests from tools/testing/selftests
or
make run_test from tools/testing/selftests/net
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I run the ftracetest in a busybox docker container, I saw
following error. Make the logfile template to comply with busybox's
mktemp. It also keep the logfiles under the logs directory.
# /linux/tools/testing/selftests/ftrace/ftracetest
=== Ftrace unit tests ===
mktemp: unrecognized option `--tmpdir=/linux/tools/testing/selftests/ftrace/logs/20141106-003624/'
BusyBox v1.22.1 (2014-05-22 23:22:11 UTC) multi-call binary.
Usage: mktemp [-dt] [-p DIR] [TEMPLATE]
Create a temporary file with name based on TEMPLATE and print its name.
TEMPLATE must end with XXXXXX (e.g. [/dir/]nameXXXXXX).
Without TEMPLATE, -t tmp.XXXXXX is assumed.
-d Make directory, not file
-q Fail silently on errors
-t Prepend base directory name to TEMPLATE
-p DIR Use DIR as a base directory (implies -t)
-u Do not create anything; print a name
Base directory is: -p DIR, else $TMPDIR, else /tmp
[1] Basic trace file check/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
/linux/tools/testing/selftests/ftrace/ftracetest: line 244: can't create : nonexistent directory
[FAIL]
Link: http://lkml.kernel.org/r/1415239470-28705-1-git-send-email-namhyung@kernel.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Added three test cases to get the feel of adding tests to ftracetest.
The three cases are:
function profiling test, to make sure function profiling still works
with function tracing (was a regression)
function graph filter test to make sure that function graph filtering works.
function graph filter with stack tracing test to make sure that the function
graph filter does filter and also continues to filter when another function tracer
is running (like the stack tracer)
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.602754370@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Created the file tools/testing/ftrace/test.d/functions that will
hold helper functions.
Current helper functions include:
Add clear_trace() helper to reset the trace file
Used as a descriptive name to show that "echo > trace" is clearing
the trace file.
Add disable/enable_tracing() helper calls
Add calls that disable and enable tracing respectively by echoing
0 or 1 into tracing_on.
Add helper reset_tracer() function
Add a helper function reset_tracer() that will clear the current_tracer
(echo nop > current_tracer).
Link: http://lkml.kernel.org/r/20141103212737.696365174@goodmis.org
Link: http://lkml.kernel.org/r/20141104153028.465517119@goodmis.org
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently bpf test run from the Makefile. Move it out of the
Makefile to be run from a shell script to allow the test to
be run as stand-alone test, in addition to allowing the test
run from a make target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: David S. Miller <davem@davemloft.net>
mounted in two locations caused the ftracetests to fail. This is because
the ftracetests script does a grep of the /proc/mounts file to find
where the debugfs file system is mounted. If it is mounted twice, then
the grep returns two lines instead of just one. This causes the ftracetests
to get confused and fail.
Use "head -1" to only return the first mount point for debugfs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUV812AAoJEEjnJuOKh9ldquIIAK1DeSn6QQrA2qytqZmaW/dh
M1QiG+Ot5Qh7+qli7Sun5E58jbMvclPCiHrtr44KEGDSzABrjjv8TnqCwI9XKfiO
hn9IGFy2gCU7jNMdE+1MRPwykVwLjYBZLaLyxY/WvwJTtlPORezq7KTdvUPgobCN
hQfxPyowofbGTsV9+75olSo9ercOKGv4NSopY2fj6fag185emUDLT4GGWGsWh/1j
heUhe4vYuuB43YAVgk+XeJEOQ8u4uME9lTocuykISazXupZo4+RfZzQPziD5Q/Mt
LuOg4zUpG7fX2AkECXvTR055CcCVVHKUTBZppIpeKqfAXBU6GeoaP1AM2CDx72I=
=jKWc
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftracetest fix from Steven Rostedt:
"Running the ftracetests on a machine that had the debugfs file system
mounted in two locations caused the ftracetests to fail. This is
because the ftracetests script does a grep of the /proc/mounts file to
find where the debugfs file system is mounted. If it is mounted
twice, then the grep returns two lines instead of just one. This
causes the ftracetests to get confused and fail.
Use "head -1" to only return the first mount point for debugfs"
* tag 'ftracetest-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftracetest: Take the first debugfs mount found
Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remove rcutorture configuration files which are no longer necessary.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Add config and boot parameters to enable the self tests in rcutorture testing.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcutorture scripts create a qemu-cmd script containing the actual
qemu command. However, this command references the build directory,
which will be overwritten by later builds. This commit therefore runs
the kernel out of the results directory so that less hand-editing is
required to re-run a previous test.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Add a kprobes on ftrace testcase. The testcase verifies that
- enabling and disabling function tracing works on a function which
already contains a dynamic kprobe
- adding and removing a dynamic kprobe works on a function which is
already enabled for function tracing
Link: http://lkml.kernel.org/p/1413802323-5297-2-git-send-email-heiko.carstens@de.ibm.com
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Running ftracetests on a box that mounted debugfs in two locations
made the ftracetests fail. This is because the tests uses a grep
of debugfs from the /proc/mounts file to find the debugfs mount
point, and then appends "/tracing" to that string to get the tracing
directory.
If the debugfs directory is mounted twice, then that grep will return
two answers and appending "/tracing" to a string with two lines will
not work.
Use "head -1" to only take the first mount point found.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Rename CONFIG_RCU_BOOST_PRIO to CONFIG_RCU_KTHREAD_PRIO and use this
value for both the per-CPU kthreads (rcuc/N) and the rcu boosting
threads (rcub/n).
Also, create the module_parameter rcutree.kthread_prio to be used on
the kernel command line at boot to set a new value (rcutree.kthread_prio=N).
Signed-off-by: Clark Williams <clark.williams@gmail.com>
[ paulmck: Ported to rcu/dev, applied Paul Bolle and Peter Zijlstra feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The CONFIG_RCU_CPU_STALL_VERBOSE Kconfig parameter causes preemptible
RCU's CPU stall warnings to dump out any preempted tasks that are blocking
the current RCU grace period. This information is useful, and the default
has been CONFIG_RCU_CPU_STALL_VERBOSE=y for some years. It is therefore
time for this commit to remove this Kconfig parameter, so that future
kernel builds will always act as if CONFIG_RCU_CPU_STALL_VERBOSE=y.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle were:
- changes related to No-CBs CPUs and NO_HZ_FULL
- RCU-tasks implementation
- torture-test updates
- miscellaneous fixes
- locktorture updates
- RCU documentation updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
workqueue: Use cond_resched_rcu_qs macro
workqueue: Add quiescent state between work items
locktorture: Cleanup header usage
locktorture: Cannot hold read and write lock
locktorture: Fix __acquire annotation for spinlock irq
locktorture: Support rwlocks
rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
locktorture: Document boot/module parameters
rcutorture: Rename rcutorture_runnable parameter
locktorture: Add test scenario for rwsem_lock
locktorture: Add test scenario for mutex_lock
locktorture: Make torture scripting account for new _runnable name
locktorture: Introduce torture context
locktorture: Support rwsems
locktorture: Add infrastructure for torturing read locks
torture: Address race in module cleanup
locktorture: Make statistics generic
locktorture: Teach about lock debugging
locktorture: Support mutexes
locktorture: Add documentation
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=J1XN
-----END PGP SIGNATURE-----
Merge tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- fix for missing arguments to printf
- fix to build failures on 32-bit systems.
- enhancement to run memfd_test run on all architectures as most
architectures support __NR_memfd_create
* tag 'kselftest-3.18-updates-1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/memfd: Run test on all architectures
memfd_test: Add missing argument to printf()
memfd_test: Make it work on 32-bit systems
tools/testing/selftest directory called "ftrace" that holds tests
aimed at testing ftrace and subsystems that use ftrace (like kprobes).
So far only a few tests were written (by Masami Hiramatsu), but more will
be added in the near future (3.19).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNXv0AAoJEKQekfcNnQGuCtkH/1bQgWWVZk0zphISmR01stPj
ods1P937icSXxFyrz2sVf7qht5GCisWkvSC34AWcBP88fY0KFPYAiR+4WlbCr3Y5
TEjEt/qRaBEDRtUzW5mjQMwTZ/G4KBMXOh87yrffQs8eSuIXcK55chkddtnMFZ13
H2bx27rMqFamOLbj3vyAfxUayonZsaXl7YQfRq1lu3jvZCi3zBJdjohHtXvrjKDo
dJ+ZIJtazuFV/LmsCfEtjibQNCQiVIbsxRJ/oCqUAYzKyY4gFwWbqsyH9g0Wv7HX
LAJpNgChLAau+mUQoVpc4tPU/NBCGPgVoV5ojdKJXU6WYkIkCUaIi6qBEHpG8LE=
=HFgG
-----END PGP SIGNATURE-----
Merge tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace test code from Steven Rostedt:
"This patch series starts a new selftests section in the
tools/testing/selftest directory called "ftrace" that holds tests
aimed at testing ftrace and subsystems that use ftrace (like kprobes).
So far only a few tests were written (by Masami Hiramatsu), but more
will be added in the near future (3.19)"
* tag 'ftracetest-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Add selftest scripts testing kprobe-tracer as startup test
ftracetest: Add POSIX.3 standard and XFAIL result codes
ftracetest: Add kprobe basic testcases
ftracetest: Add ftrace basic testcases
ftracetest: Initial commit for ftracetest
A way to allow users to skip a manual bisect.
Allowing cherry picked patches to be tested.
The cherry pick worked for a test I needed, but stressing it may
not have all the desired effects. It doesn't cause any regressions
so I kept it in.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUNFfHAAoJEKQekfcNnQGubhQIAIIq4PMmdEwsaK31yVCjG4TX
BFrMb1JSoGaXzgAwEItqUEj4JYQ0Px8eIqsK7llff2OC7MHnOjHvb7KjxyF+z/6G
KFhraE0GSoJsX9YPno7ZYihoNTmcm7KdVgt2l+G159p83neaUEYY6/2Hj86+IbXA
y6CoIroOhiY96i7PUrMtYfPLUsUc6J5tjTNmRzs4w1SB7y0KO5uUBfJyAE8msNnM
18Z+a8B12u8KMwC6mVmJr81TgWbVIRw5lwrXXHLaL4FbIC1tkuAduW2uuN0yf0hv
11d3hY205Eskr7ms9cr903pr7P2YQcRTwMgBt7c1hwHAG6D+2s7/PATn6Jj/Hz8=
=a3Bk
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
"A fix and a clean up to ktest, as well as two small features.
- A way to allow users to skip a manual bisect.
- Allowing cherry picked patches to be tested.
The cherry pick worked for a test I needed, but stressing it may not
have all the desired effects. It doesn't cause any regressions so I
kept it in"
* tag 'ktest-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Don't bother with bisect good or bad on replay
ktest: Fix check for new kernel success on rebooting to good kernel
ktest: add ability to skip during BISECT_MANUAL
ktest: Add PATCHCHECK_CHERRY
Pull powerpc updates from Michael Ellerman:
"Here's a first pull request for powerpc updates for 3.18.
The bulk of the additions are for the "cxl" driver, for IBM's Coherent
Accelerator Processor Interface (CAPI). Most of it's in drivers/misc,
which Greg & Arnd maintain, Greg said he was happy for us to take it
through our tree.
There's the usual minor cleanups and fixes, including a bit of noise
in drivers from some of those. A bunch of updates to our EEH code,
which has been getting more testing. Several nice speedups from
Anton, including 20% in clear_page().
And a bunch of updates for freescale from Scott"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (130 commits)
cxl: Fix afu_read() not doing finish_wait() on signal or non-blocking
cxl: Add documentation for userspace APIs
cxl: Add driver to Kbuild and Makefiles
cxl: Add userspace header file
cxl: Driver code for powernv PCIe based cards for userspace access
cxl: Add base builtin support
powerpc/mm: Add hooks for cxl
powerpc/opal: Add PHB to cxl mode call
powerpc/mm: Add new hash_page_mm()
powerpc/powerpc: Add new PCIe functions for allocating cxl interrupts
cxl: Add new header for call backs and structs
powerpc/powernv: Split out set MSI IRQ chip code
powerpc/mm: Export mmu_kernel_ssize and mmu_linear_psize
powerpc/msi: Improve IRQ bitmap allocator
powerpc/cell: Make spu_flush_all_slbs() generic
powerpc/cell: Move data segment faulting code out of cell platform
powerpc/cell: Move spu_handle_mm_fault() out of cell platform
powerpc/pseries: Use new defines when calling H_SET_MODE
powerpc: Update contact info in Documentation files
powerpc/perf/hv-24x7: Simplify catalog_read()
...
Add two selftest scripts which tests kprobe-tracer as the startup
selftest does.
These test cases are testing that the kprobe_event can accept a
kprobe event with $stack related arguments and a kretprobe event
with $retval argument.
Link: http://lkml.kernel.org/p/20141008040307.13415.45145.stgit@kbuild-f20.novalocal
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If git bisect reply is being used in the bisect tests, don't bother
doing the git bisect good or git bisect bad calls. The git bisect
reply will override them anyway, and that's called immediately
after the other two. Going the git bisect (good|bad) is just a
waste of time.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The reboot function when rebooting back to a good kernel has a check
to make sure that a new kernel was indeed booted. But that check
uses a timeout value, which when calling the monitor will still
return success if the timeout is hit (no bug was found). It should
return an error to let the reboot code know that a new kernel was
not reached. Only the reboot code checks the return value of the
monitor.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add XFAIL and POSIX 1003.3 standard codes (UNRESOLVED/
UNTESTED/UNSUPPORTED) as result codes. These are used for the
results that test case is expected to fail or unsupported
feature (by config).
To return these result code, this introduces exit_unresolved,
exit_untested, exit_unsupported and exit_xfail functions,
which use real-time signals to notify the result code to
ftracetest.
This also set "errexit" option for the testcases, so that
the tests don't need to exit explicitly.
Note that if the test returns UNRESOLVED/UNSUPPORTED/FAIL,
its test log including executed commands is shown on console
and main logfile as below.
------
# ./ftracetest samples/
=== Ftrace unit tests ===
[1] failure-case example [FAIL]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
++ cat non-exist-file
cat: non-exist-file: No such file or directory
[2] pass-case example [PASS]
[3] unresolved-case example [UNRESOLVED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
++ trap exit_unresolved INT
++ kill -INT 29324
+++ exit_unresolved
+++ kill -s 38 29265
+++ exit 0
[4] unsupported-case example [UNSUPPORTED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
++ exit_unsupported
++ kill -s 40 29265
++ exit 0
[5] untested-case example [UNTESTED]
[6] xfail-case example [XFAIL]
# of passed: 1
# of failed: 1
# of unresolved: 1
# of untested: 1
# of unsupported: 1
# of xfailed: 1
# of undefined(test bug): 0
------
Link: http://lkml.kernel.org/p/20140929120211.30203.99510.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a "rw_lock" torture test to stress kernel rwlocks and their irq
variant. Reader critical regions are 5x longer than writers. As such
a similar ratio of lock acquisitions is seen in the statistics. In the
case of massive contention, both hold the lock for 1/10 of a second.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
It is a rarely exercised case, so we want to have a test to ensure it
works as required.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add basic testcases for kprobe dynamic events.
This also shows that the ftracetest accepts sub-directory
for new testcases.
Link: http://lkml.kernel.org/p/20140922234254.23415.46964.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add ftrace basic testcases. This just checks ftrace debugfs
interface works as it is designed.
Link: http://lkml.kernel.org/p/20140922234252.23415.62897.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftracetest is a collection of testcase shell-scripts for ftrace.
To avoid regressions of ftrace, these testcases check correct
ftrace behaviors. If someone would like to add any features on
ftrace, the patch series should have at least one testcase for
checking the new behavior.
Link: http://lkml.kernel.org/p/20140922234250.23415.68758.stgit@kbuild-f20.novalocal
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When doing a manual bisect, a build can fail or a test can be inconclusive.
In these cases it would be helpful to be able to skip the test entirely.
Link: http://lkml.kernel.org/r/1409164021-2136-1-git-send-email-chris.j.arges@canonical.com
Reviewed-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add a way to run a patchcheck test on the commits that are in one branch
but not in another. This uses git cherry to find a list of commits to
test each one with.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Remove the dependence on x86 to run the memfd test. Verfied on 32-bit powerpc.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This commit changes rcutorture_runnable to torture_runnable, which is
consistent with the names of the other parameters and is a bit shorter
as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although the test cases have been added, they must be specified explicitly
via the kvm.sh --configs argument in order to run them. This commit
therefore adds the RCU-tasks tests to the CFLIST so that they will be
run automatically by default.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds the TASKS01 and TASKS02 Kconfig fragments, along with
the corresponding TASKS01.boot and TASKS02.boot boot-parameter files
specifying that rcutorture test RCU-tasks instead of the default flavor.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When starting a new torture run while an old one is still running, both
qemu processes can be outputting to the same console.out file. This can
cause quite a bit of confusion, so this commit checks for this situation,
which is normally indicated by nul bytes in the console output. Yes,
if your new run uses up an exact number of blocks of the file, this
check will be ineffective, but the odds are not bad.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit specifies offstack cpumasks in TREE07 in order to catch
references to unallocated cpumask_var_t variables.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers. This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The current set of tests covers only cases where either all possible CPUs
are nohz_full= CPUs or none of them are. Because there have been some
recent bug escapes in cases where only some of the CPUs are nohz_full=
CPUs, this commit add a configuration where only half of the CPUs are
nohz_full= CPUs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit tries to get people into the correct directory before
creating the initrd directory.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh. Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.
This commit changes all such uses to use bash explicitly.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This test currently fails on 32-bit systems since we use u64 type to pass the
flags to fcntl.
This commit changes this to use 'unsigned int' type for flags to fcntl making it
work on 32-bit systems.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86'
to 'x86'. Test by compilation.
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shuah Khan <shuah.kh@samsung.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull namespace updates from Eric Biederman:
"This is a bunch of small changes built against 3.16-rc6. The most
significant change for users is the first patch which makes setns
drmatically faster by removing unneded rcu handling.
The next chunk of changes are so that "mount -o remount,.." will not
allow the user namespace root to drop flags on a mount set by the
system wide root. Aks this forces read-only mounts to stay read-only,
no-dev mounts to stay no-dev, no-suid mounts to stay no-suid, no-exec
mounts to stay no exec and it prevents unprivileged users from messing
with a mounts atime settings. I have included my test case as the
last patch in this series so people performing backports can verify
this change works correctly.
The next change fixes a bug in NFS that was discovered while auditing
nsproxy users for the first optimization. Today you can oops the
kernel by reading /proc/fs/nfsfs/{servers,volumes} if you are clever
with pid namespaces. I rebased and fixed the build of the
!CONFIG_NFS_FS case yesterday when a build bot caught my typo. Given
that no one to my knowledge bases anything on my tree fixing the typo
in place seems more responsible that requiring a typo-fix to be
backported as well.
The last change is a small semantic cleanup introducing
/proc/thread-self and pointing /proc/mounts and /proc/net at it. This
prevents several kinds of problemantic corner cases. It is a
user-visible change so it has a minute chance of causing regressions
so the change to /proc/mounts and /proc/net are individual one line
commits that can be trivially reverted. Unfortunately I lost and
could not find the email of the original reporter so he is not
credited. From at least one perspective this change to /proc/net is a
refgression fix to allow pthread /proc/net uses that were broken by
the introduction of the network namespace"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
proc: Point /proc/mounts at /proc/thread-self/mounts instead of /proc/self/mounts
proc: Point /proc/net at /proc/thread-self/net instead of /proc/self/net
proc: Implement /proc/thread-self to point at the directory of the current thread
proc: Have net show up under /proc/<tgid>/task/<tid>
NFS: Fix /proc/fs/nfsfs/servers and /proc/fs/nfsfs/volumes
mnt: Add tests for unprivileged remount cases that have found to be faulty
mnt: Change the default remount atime from relatime to the existing value
mnt: Correct permission checks in do_remount
mnt: Move the test for MNT_LOCK_READONLY from change_mount_flags into do_remount
mnt: Only change user settable mount flags in remount
namespaces: Use task_lock and not rcu to protect nsproxy
Setting SEAL_WRITE is not possible if there're pending GUP users. This
commit adds selftests for memfd+sealing that use FUSE to create pending
page-references. FUSE is very helpful here in that it allows us to delay
direct-IO operations for an arbitrary amount of time. This way, we can
force the kernel to pin pages and then run our normal selftests.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some basic tests to verify sealing on memfds works as expected and
guarantees the advertised semantics.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On IBM powerpc where multiple page size value are supported, current
ppc64 and ppc64el distro don't define the PAGE_SIZE variable in
/usr/include as this is a dynamic value retrieved by the getpagesize()
or sysconf() defined in unistd.h. The PAGE_SIZE variable sounds defined
when only one value is supported by the kernel.
As such, when the PAGE_SIZE definition doesn't exist system should
retrieve the dynamic value.
Signed-off-by: Thierry Fauck <thierry@linux.vnet.ibm.com>
Cc: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc updates from Ben Herrenschmidt:
"This is the powerpc new goodies for 3.17. The short story:
The biggest bit is Michael removing all of pre-POWER4 processor
support from the 64-bit kernel. POWER3 and rs64. This gets rid of a
ton of old cruft that has been bitrotting in a long while. It was
broken for quite a few versions already and nobody noticed. Nobody
uses those machines anymore. While at it, he cleaned up a bunch of
old dusty cabinets, getting rid of a skeletton or two.
Then, we have some base VFIO support for KVM, which allows assigning
of PCI devices to KVM guests, support for large 64-bit BARs on
"powernv" platforms, support for HMI (Hardware Management Interrupts)
on those same platforms, some sparse-vmemmap improvements (for memory
hotplug),
There is the usual batch of Freescale embedded updates (summary in the
merge commit) and fixes here or there, I think that's it for the
highlights"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (102 commits)
powerpc/eeh: Export eeh_iommu_group_to_pe()
powerpc/eeh: Add missing #ifdef CONFIG_IOMMU_API
powerpc: Reduce scariness of interrupt frames in stack traces
powerpc: start loop at section start of start in vmemmap_populated()
powerpc: implement vmemmap_free()
powerpc: implement vmemmap_remove_mapping() for BOOK3S
powerpc: implement vmemmap_list_free()
powerpc: Fail remap_4k_pfn() if PFN doesn't fit inside PTE
powerpc/book3s: Fix endianess issue for HMI handling on napping cpus.
powerpc/book3s: handle HMIs for cpus in nap mode.
powerpc/powernv: Invoke opal call to handle hmi.
powerpc/book3s: Add basic infrastructure to handle HMI in Linux.
powerpc/iommu: Fix comments with it_page_shift
powerpc/powernv: Handle compound PE in config accessors
powerpc/powernv: Handle compound PE for EEH
powerpc/powernv: Handle compound PE
powerpc/powernv: Split ioda_eeh_get_state()
powerpc/powernv: Allow to freeze PE
powerpc/powernv: Enable M64 aperatus for PHB3
powerpc/eeh: Aux PE data for error log
...
Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that touched
many different subsystems so it was agreed it should go through this
tree to handle merge issues. There's also some firmware loading
updates, as well as tests added, and a few other tiny changes, the
changelog has the details.
All have been in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
=w8OJ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here's the big driver-core pull request for 3.17-rc1.
Largest thing in here is the dma-buf rework and fence code, that
touched many different subsystems so it was agreed it should go
through this tree to handle merge issues. There's also some firmware
loading updates, as well as tests added, and a few other tiny changes,
the changelog has the details.
All have been in linux-next for a long time"
* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
ARM: imx: Remove references to platform_bus in mxc code
firmware loader: Fix _request_firmware_load() return val for fw load abort
platform: Remove most references to platform_bus device
test: add firmware_class loader test
doc: fix minor typos in firmware_class README
staging: android: Cleanup style issues
Documentation: devres: Sort managed interfaces
Documentation: devres: Add devm_kmalloc() et al
fs: debugfs: remove trailing whitespace
kernfs: kernel-doc warning fix
debugfs: Fix corrupted loop in debugfs_remove_recursive
stable_kernel_rules: Add pointer to netdev-FAQ for network patches
driver core: platform: add device binding path 'driver_override'
driver core/platform: remove unused implicit padding in platform_object
firmware loader: inform direct failure when udev loader is disabled
firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
firmware: read firmware size using i_size_read()
firmware loader: allow disabling of udev as firmware loader
reservation: add suppport for read-only access using rcu
reservation: update api and add some helpers
...
Conflicts:
drivers/base/platform.c
Here's the big driver misc / char pull request for 3.17-rc1.
Lots of things in here, the thunderbolt support for Apple laptops, some
other new drivers, testing fixes, and other good things. All have been
in linux-next for a long time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlPf1LcACgkQMUfUDdst+ymaVwCgqMrKFmpduBufOSFROhxlfB5Q
ajsAoNDmIn3pgla+kj23Y5ib20aMi++s
=IdIr
-----END PGP SIGNATURE-----
Merge tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver patches from Greg KH:
"Here's the big driver misc / char pull request for 3.17-rc1.
Lots of things in here, the thunderbolt support for Apple laptops,
some other new drivers, testing fixes, and other good things. All
have been in linux-next for a long time"
* tag 'char-misc-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (119 commits)
misc: bh1780: Introduce the use of devm_kzalloc
Lattice ECP3 FPGA: Correct endianness
drivers/misc/ti-st: Load firmware from ti-connectivity directory.
dt-bindings: extcon: Add support for SM5502 MUIC device
extcon: sm5502: Change internal hardware switch according to cable type
extcon: sm5502: Detect cable state after completing platform booting
extcon: sm5502: Add support new SM5502 extcon device driver
extcon: arizona: Get MICVDD against extcon device
extcon: Remove unnecessary OOM messages
misc: vexpress: Fix sparse non static symbol warnings
mei: drop unused hw dependent fw status functions
misc: bh1770glc: Use managed functions
pcmcia: remove DEFINE_PCI_DEVICE_TABLE usage
misc: remove DEFINE_PCI_DEVICE_TABLE usage
ipack: Replace DEFINE_PCI_DEVICE_TABLE macro use
drivers/char/dsp56k.c: drop check for negativity of unsigned parameter
mei: fix return value on disconnect timeout
mei: don't schedule suspend in pm idle
mei: start disconnect request timer consistently
mei: reset client connection state on timeout
...
Pull RCU changes from Ingo Molar:
"The main changes:
- torture-test updates
- callback-offloading changes
- maintainership changes
- update RCU documentation
- miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rcu: Allow for NULL tick_nohz_full_mask when nohz_full= missing
rcu: Fix a sparse warning in rcu_report_unblock_qs_rnp()
rcu: Fix a sparse warning in rcu_initiate_boost()
rcu: Fix __rcu_reclaim() to use true/false for bool
rcu: Remove CONFIG_PROVE_RCU_DELAY
rcu: Use __this_cpu_read() instead of per_cpu_ptr()
rcu: Don't use NMIs to dump other CPUs' stacks
rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs
rcu: Simplify priority boosting by putting rt_mutex in rcu_node
rcu: Check both root and current rcu_node when setting up future grace period
rcu: Allow post-unlock reference for rt_mutex
rcu: Loosen __call_rcu()'s rcu_head alignment constraint
rcu: Eliminate read-modify-write ACCESS_ONCE() calls
rcu: Remove redundant ACCESS_ONCE() from tick_do_timer_cpu
rcu: Make rcu node arrays static const char * const
signal: Explain local_irq_save() call
rcu: Handle obsolete references to TINY_PREEMPT_RCU
rcu: Document deadlock-avoidance information for rcu_read_unlock()
scripts: Teach get_maintainer.pl about the new "R:" tag
rcu: Update rcu torture maintainership filename patterns
...
worked properly as it assumed the bad config was a subset of the good
config, and just found the config that would break the build.
The new way does a diff of the bad config verses the good config and makes
the similar until it finds that one config works and the other does not
and reports the config that makes that difference. The two configs do
not need to be related. It is much more useful now.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT35bBAAoJEKQekfcNnQGulc4H/RXCeEXlJFQZ93Q5a5beLxYY
AaZTKpUUDTz/747AVRgsfI1s1wauLFTTO+hYtJ47s5qFeKa7ISj9UlBPtJVdFMTq
xMg3y31OPj9R437S9o5PCDcdzUcQTGmHst1+7mwHkZLV3dS4E4xxC46rZXs4w7RE
Ko1Qg43HIn4sPXKGNMIaSBrLLY4xeJCgKXFRUiBlH54w0JrQO3ZrsvldpzhunM4b
Gt+mEzgxkJgAWYxFjkn4iD+b1Xsxv12YZuFrl/BwE9/D4Kr5CCeu8Tdpkc4W1F29
keXomcy6+1deK3nvFaPH9JG0lGYsgqcrPfE0ESkG0DIflNhY7rnzmh/HJMKg6CM=
=QDWs
-----END PGP SIGNATURE-----
Merge tag 'ktest-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull config-bisect changes from Steven Rostedt:
"The big change here is the rewrite of config-bisect. The old way
never worked properly as it assumed the bad config was a subset of the
good config, and just found the config that would break the build.
The new way does a diff of the bad config verses the good config and
makes the similar until it finds that one config works and the other
does not and reports the config that makes that difference. The two
configs do not need to be related. It is much more useful now:
* tag 'ktest-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Update documentation on config_bisect
ktest: Add the config bisect manual back
ktest: Remove unused functions
ktest: Put back in the CONFIG_BISECT_CHECK
ktest: Rewrite the config-bisect to actually work
ktest: Some cleanup for improving readability
ktest: add 2nd parameter of run_command() to set the redirect target file
Kenton Varda <kenton@sandstorm.io> discovered that by remounting a
read-only bind mount read-only in a user namespace the
MNT_LOCK_READONLY bit would be cleared, allowing an unprivileged user
to the remount a read-only mount read-write.
Upon review of the code in remount it was discovered that the code allowed
nosuid, noexec, and nodev to be cleared. It was also discovered that
the code was allowing the per mount atime flags to be changed.
The first naive patch to fix these issues contained the flaw that using
default atime settings when remounting a filesystem could be disallowed.
To avoid this problems in the future add tests to ensure unprivileged
remounts are succeeding and failing at the appropriate times.
Cc: stable@vger.kernel.org
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Although we expect some small discrepancies for very large counts, we
seem to be able to count up to 64 billion instructions without too much
skew, so do so.
Also switch to using decimals for the instruction counts. This just
makes it easier to visually compare the expected vs actual values, as
well as the raw result from instructions.
Before:
instructions: result 68719476753 running/enabled 13101961654
cycles: result 38077343785 running/enabled 13101725752
Looped for 68719476736 instructions, overhead 17
Expected 68719476753
Actual 68719476753
Delta 0, 0.000000%
success: count_instructions
After:
instructions: result 64000000016 running/enabled 12197599964
cycles: result 35412471674 running/enabled 12197534110
Looped for 64000000000 instructions, overhead 16
Expected 64000000016
Actual 64000000016
Delta 0, 0.000000%
success: count_instructions
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Have a task eat some cpu while we are counting instructions to create
some scheduler pressure. The idea being to try and unearth any bugs we
have in counting that only appear when context switching is happening.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
There is at least one bug in core_busy_loop(), we use r0, but it's
not in the clobber list. We were getting away with this it seems but
that was luck.
It's also fishy to be touching the stack, even if we do it below the
stack pointer. It seems we get away with it, but looking at the
generated code that may just be luck.
So move it into assembler, do all the stack handling by hand. We create
a stack frame to save the non-volatiles in, so we can muck around with
them.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
start and end should be unsigned long.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Currently we ignore errors from our sub Makefiles. We inherited that
from the top-level selftests Makefile which aims to build and run as
many tests as possible and damn the torpedoes.
For the powerpc tests we'd instead like any errors to fail the build, so
we can automatically catch build failures.
We can achieve the best of both worlds by using -k, which tells make to
keep building when it hits an error, but still reports the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This provides a simple interface to trigger the firmware_class loader
to test built-in, filesystem, and user helper modes. Additionally adds
tests via the new interface to the selftests tree.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This resolves a number of merge issues with changes in this tree and
Linus's tree at the same time.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some systems, hot-plug tests could hang forever waiting for cpu and
memory to be ready to be offlined. A special hot-plug target is created
to run full range of hot-plug tests. In default mode, hot-plug tests run
in safe mode with a limited scope. In limited mode, cpu-hotplug test is
run on a single cpu as opposed to all hotplug capable cpus, and memory
hotplug test is run on 2% of hotplug capable memory instead of 10%. In
addition to the above change, cpu-hotplug is chnged to change processor
affinity to cpu 0 so it doesn't impact itself while the test runs.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kcmp_test.c: In function ‘main’:
kcmp_test.c:85:5: warning: format ‘%li’ expects argument of type ‘long int’, but argument 2 has type ‘int’ [-Wformat=]
ret, strerror(errno));
^
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makefile compile linking order is incorrect causing the compile
to fail not finding librt symbols.
/tmp/cceTqwFh.o: In function `test_queue_fail':
mq_open_tests.c:(.text+0x6b): undefined reference to `mq_open'
mq_open_tests.c:(.text+0x80): undefined reference to `mq_getattr'
mq_open_tests.c:(.text+0xa2): undefined reference to `mq_close'
mq_open_tests.c:(.text+0xcf): undefined reference to `mq_unlink'
/tmp/cceTqwFh.o: In function `test_queue.constprop.6':
mq_open_tests.c:(.text+0x15a): undefined reference to `mq_open'
mq_open_tests.c:(.text+0x16f): undefined reference to `mq_getattr'
mq_open_tests.c:(.text+0x195): undefined reference to `mq_close'
mq_open_tests.c:(.text+0x1c2): undefined reference to `mq_unlink'
/tmp/cceTqwFh.o: In function `shutdown.part.0':
mq_open_tests.c:(.text.unlikely+0x5b): undefined reference to `mq_close'
mq_open_tests.c:(.text.unlikely+0x7a): undefined reference to `mq_unlink'
collect2: error: ld returned 1 exit status
make: *** [all] Error 1
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix several compile warnings - these are repeats like the ones
below:
gcc -O2 -lrt mq_open_tests.c -o mq_open_tests
mq_open_tests.c: In function ‘main’:
mq_open_tests.c:295:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘rlim_t’ [-Wformat=]
printf("\tRLIMIT_MSGQUEUE(soft):\t\t%d\n", saved_limits.rlim_cur);
^
mq_open_tests.c: In function ‘shutdown’:
mq_open_tests.c:83:9: warning: ignoring return value of ‘seteuid’, declared with attribute warn_unused_result [-Wunused-result]
seteuid(0);
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix numerous compile warnings in mq_perf_tests.c. All of these
are wrong format in printfs when printing nvsec.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
on-off-test is a bash script and invoked from /bin/sh
This results in the following error:
./on-off-test.sh: 9: [: !=: unexpected operator
Changed Makefile to use bash instead.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ingo Molnar