Commit Graph

36 Commits

Author SHA1 Message Date
Eric Dumazet cc7ec456f8 net_sched: cleanups
Cleanup net/sched code to current CodingStyle and practices.

Reduce inline abuse

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-19 23:31:12 -08:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jarek Poplawski f30ab418a1 pkt_sched: Remove qdisc->ops->requeue() etc.
After implementing qdisc->ops->peek() and changing sch_netem into
classless qdisc there are no more qdisc->ops->requeue() users. This
patch removes this method with its wrappers (qdisc_requeue()), and
also unused qdisc->requeue structure. There are a few minor fixes of
warnings (htb_enqueue()) and comments btw.

The idea to kill ->requeue() and a similar patch were first developed
by David S. Miller.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 22:56:30 -08:00
Jarek Poplawski 8e3af97899 pkt_sched: Add qdisc->ops->peek() implementation.
Add qdisc->ops->peek() implementation for work-conserving qdiscs.
With feedback from Patrick McHardy.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31 00:45:55 -07:00
Jussi Kivilinna 0abf77e55a net_sched: Add accessor function for packet length for qdiscs
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-20 00:08:27 -07:00
David S. Miller 5ce2d488fe pkt_sched: Remove 'dev' member of struct Qdisc.
It can be obtained via the netdev_queue.  So create a helper routine,
qdisc_dev(), to make the transformations nicer looking.

Now, qdisc_alloc() now no longer needs a net_device pointer argument.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08 17:06:30 -07:00
Thomas Graf bc3ed28caa netlink: Improve returned error codes
Make nlmsg_trim(), nlmsg_cancel(), genlmsg_cancel(), and
nla_nest_cancel() void functions.

Return -EMSGSIZE instead of -1 if the provided message buffer is not
big enough.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-03 16:36:54 -07:00
Patrick McHardy 27a3421e48 [NET_SCHED]: Use nla_policy for attribute validation in packet schedulers
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:22 -08:00
Patrick McHardy cee63723b3 [NET_SCHED]: Propagate nla_parse return value
nla_parse() returns more detailed errno codes, propagate them back on
error.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:18 -08:00
Patrick McHardy 1e90474c37 [NET_SCHED]: Convert packet schedulers from rtnetlink to new netlink API
Convert packet schedulers to use the netlink API. Unfortunately a gradual
conversion is not possible without breaking compilation in the middle or
adding lots of casts, so this patch converts them all in one step. The
patch has been mostly generated automatically with some minor edits to
at least allow seperate conversion of classifiers and actions.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 15:11:10 -08:00
Eric Dumazet 20fea08b5f [NET]: Move Qdisc_class_ops and Qdisc_ops in appropriate sections.
Qdisc_class_ops are const, and Qdisc_ops are mostly read.

Using "const" and "__read_mostly" qualifiers helps to reduce false
sharing.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:53:58 -08:00
Patrick McHardy 0ba4805383 [NET_SCHED]: Remove unnecessary includes
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 22:16:41 -07:00
YOSHIFUJI Hideaki 10297b9931 [NET] SCHED: Fix whitespace errors.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-10 23:20:08 -08:00
Panagiotis Issaris 0da974f4f3 [NET]: Conversions from kmalloc+memset to k(z|c)alloc.
Signed-off-by: Panagiotis Issaris <takis@issaris.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:51:30 -07:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Thomas Graf bdc450a0bb [PKT_SCHED]: (G)RED: Introduce hard dropping
Introduces a new flag TC_RED_HARDDROP which specifies that if ECN
marking is enabled packets should still be dropped once the
average queue length exceeds the maximum threshold.

This _may_ help to avoid global synchronisation during small
bursts of peers advertising but not caring about ECN. Use this
option very carefully, it does more harm than good if
(qth_max - qth_min) does not cover at least two average burst
cycles.

The difference to the current behaviour, in which we'd run into
the hard queue limit, is that due to the low pass filter of RED
short bursts are less likely to cause a global synchronisation.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:29 +01:00
Thomas Graf b38c7eef7e [PKT_SCHED]: GRED: Support ECN marking
Adds a new u8 flags in a unused padding area of the netlink
message. Adds ECN marking support to be used instead of dropping
packets immediately.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:29 +01:00
Thomas Graf d8f64e1960 [PKT_SCHED]: GRED: Fix restart of idle period in WRED mode upon dequeue and drop
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 1e4dfaf9b9 [PKT_SCHED]: GRED: Cleanup and remove unnecessary code
Removes unnecessary includes, initializers, and simplifies
the code a bit.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 6214e653cc [PKT_SCHED]: GRED: Remove auto-creation of default VQ
Since we are no longer depending on the default VQ to be always
allocated we can leave it up to the user to actually create it.
This gives the user the ability to leave it out on purpose and
enqueue packets directly to the device without applying the RED
algorithm.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 7051703b99 [PKT_SCHED]: GRED: Dont abuse default VQ for equalizing
Introduces a new red parameter set for use in equalize mode,
although only the qavg variable and the idle period marker are
being used for now this makes it possible to allow a separate
parameter set to be used for equalize later on.

The use of this separate parameter set fixes a bogus start of
an idle period in gred_drop() which did start an idle period
on the default VQ even if equalize mode was disabled.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 4a591834cf [PKT_SCHED]: GRED: Remove initd flag
The case when the default VQ is not set up yet is already handled
in a less error prone way.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 18e3fb84e6 [PKT_SCHED]: GRED: Improve error handling and messages
Try to enqueue packets if we cannot associate it with a VQ, this
basically means that the default VQ has not been set up yet.

We must check if the VQ still exists while requeueing, the VQ
might have been changed between dequeue and the requeue of the
underlying qdisc.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:28 +01:00
Thomas Graf 716a1b40b0 [PKT_SCHED]: GRED: Introduce tc_index_to_dp()
Adds a transformation function returning the DP index for a
given skb according to its tc_index.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf edf7a7b1f0 [PKT_SCHED]: GRED: Use generic queue management interface
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf c3b553cdaf [PKT_SCHED]: GRED: Report congestion related drops as NET_XMIT_CN
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf 301d063c29 [PKT_SCHED]: GRED: Do not reset statistics in gred_reset/gred_change
Qdiscs are not supposed to reset statistics in reset() and while
changing parameters. My argumentation is that if the user wants
the counters to be reset he can simply remove and readd the
qdiscs, that's what most users do anyway.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf 22b33429ab [PKT_SCHED]: GRED: Use new generic red interface
Simplifies code a lot by separating the red algorithm and the
queueing logic. We now differentiate between probability marks
and forced marks but sum them together again to not break
backwards compatibility.

This brings GRED back to the level of RED and improves the
accuracy of the averge queue length calculations when stab
suggests a zero shift.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf f62d6b936d [PKT_SCHED]: GRED: Use central VQ change procedure
Introduces a function gred_change_vq() acting as a central point
to change VQ parameters. Fixes priority inheritance in rio mode
when the default DP equals 0. Adds proper locking during changes.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:27 +01:00
Thomas Graf a8aaa9958e [PKT_SCHED]: GRED: Report out-of-bound DPs as illegal
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:26 +01:00
Thomas Graf 6639607ed9 [PKT_SCHED]: GRED: Use a central table definition change procedure
Introduces a function gred_change_table_def() acting as a central
point to change the table definition.

Adds missing validations for table definition: MAX_DPs > DPs > 0
and def_DP < DPs thus fixing possible invalid memory reference
oopses. Only root could do it but having a typo crashing the
machine is a bit hard.

Adds missing locking while changing the table definition, the
operation of changing the number of DPs and removing shadowed VQs
may not be interrupted by a dequeue.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:26 +01:00
Thomas Graf e06368221c [PKT_SCHED]: GRED: Dump table definition
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:26 +01:00
Thomas Graf 05f1cc01b4 [PKT_SCHED]: GRED: Cleanup dumping
Avoids the allocation of a buffer by appending the VQs directly
to the skb and simplifies the code by using the appropriate
message construction macros.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:26 +01:00
Thomas Graf d6fd4e9667 [PKT_SCHED]: GRED: Transform grio to GRED_RIO_MODE
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:25 +01:00
Thomas Graf dea3f62852 [PKT_SCHED]: GRED: Cleanup equalize flag and add new WRED mode detection
Introduces a flags variable using bitops and transforms eqp to use
it. Converts the conditions of the form (wred && rio) to (wred)
since wred can only be enabled in rio mode anyway.

The patch also improves WRED mode detection. The current behaviour
does not allow WRED mode to be turned off again without removing
the whole qdisc first. The new algorithm checks each VQ against
each other looking for equal priorities every time a VQ is changed
or added. The performance is poor, O(n**2), but it's used only
during administrative tasks and the number of VQs is strictly
limited.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2005-11-05 22:02:25 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00