sclp_sync_wait wait synchronously for an sclp interrupt and disables
timer interrupts. However on the irq enter paths there is an extra
check if a timer interrupt would be due and calls the timer callback.
This would schedule softirqs in the wrong context.
So introduce local_tick_enable/disable which prevents this.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During startup we check if diag308 works using diag 308 subcode 6,
which stores the actual ipl information. This fails with rc = 0x102, if
the system has been ipled from the HMC using load from CD or load from file.
In the case of rc = 0x102 we have to assume that diag 308 is working,
since it still can be used to ipl from an alternative device.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The z10 system supports large pages, kvm-s390 doesnt.
Make sure that we dont advertise large pages to avoid the guest crashing as
soon as the guest kernel activates DAT.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The lctl(g) instructions require a specific alignment for the parameters.
The architecture requires a specification program check if these alignments
are not used. Enforcing this alignment also removes a possible host BUG,
since the get_guest functions check for proper alignment and emits a BUG.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Lets fix the name for the lctlg instruction...
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current interrupt handling on s390 misbehaves on an error case. On s390
each cpu has the prefix area (lowcore) for interrupt delivery. This memory
must always be available. If we fail to access the prefix area for a guest
on interrupt delivery the configuration is completely unusable. There is no
point in sending another program interrupt to an inaccessible lowcore.
Furthermore, we should not bug the host kernel, because this can be triggered
by userspace. I think the guest kernel itself can not trigger the problem, as
SET PREFIX and SIGNAL PROCESSOR SET PREFIX both check that the memory is
available and sane. As this is a userspace bug (e.g. setting the wrong guest
offset, unmapping guest memory) we should kill the userspace process instead
of BUGing the host kernel.
In the long term we probably should notify the userspace process about this
problem.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
All registers are unsigned long types. This patch changes all occurences
of guestaddr in gaccess from u64 to unsigned long.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
KVM_CAP_USER_MEMORY is used by s390, therefore, we should advertise it.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Remove arch-specific show_mem() in favor of the generic version.
This also removes the following redundant information display:
- pages in swapcache, printed by show_swap_cache_info()
where show_mem() calls show_free_areas(), which calls
show_swap_cache_info().
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that it is safe to use get_online_cpus() we can revert
[S390] cpu topology: Fix possible deadlock.
commit: fd781fa25c
and call arch_reinit_sched_domains() directly from topology_work_fn().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently list of kretprobe instances are stored in kretprobe object (as
used_instances,free_instances) and in kretprobe hash table. We have one
global kretprobe lock to serialise the access to these lists. This causes
only one kretprobe handler to execute at a time. Hence affects system
performance, particularly on SMP systems and when return probe is set on
lot of functions (like on all systemcalls).
Solution proposed here gives fine-grain locks that performs better on SMP
system compared to present kretprobe implementation.
Solution:
1) Instead of having one global lock to protect kretprobe instances
present in kretprobe object and kretprobe hash table. We will have
two locks, one lock for protecting kretprobe hash table and another
lock for kretporbe object.
2) We hold lock present in kretprobe object while we modify kretprobe
instance in kretprobe object and we hold per-hash-list lock while
modifying kretprobe instances present in that hash list. To prevent
deadlock, we never grab a per-hash-list lock while holding a kretprobe
lock.
3) We can remove used_instances from struct kretprobe, as we can
track used instances of kretprobe instances using kretprobe hash
table.
Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system
with return probes set on all systemcalls looks like this.
cacheline non-cacheline Un-patched kernel
aligned patch aligned patch
===============================================================================
real 9m46.784s 9m54.412s 10m2.450s
user 40m5.715s 40m7.142s 40m4.273s
sys 2m57.754s 2m58.583s 3m17.430s
===========================================================
Time duration for kernel compilation ("make -j 8) on the same system, when
kernel is not probed.
=========================
real 9m26.389s
user 40m8.775s
sys 2m7.283s
=========================
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables virtio_console as the default console on kvm for
s390. We currently use the same notify hack as lguest for early
console output. I will try to address this for lguest and s390 later.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
nohz: prevent tick stop outside of the idle loop
Straight forward extensions for huge pages located in the PUD instead of
PMDs.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The goal of this patchset is to support multiple hugetlb page sizes. This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg. huge page
size, number of huge pages currently allocated, etc).
The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.
This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.
Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.
[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.
I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.
I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.
Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Flush the shadow mmu before removing regions to avoid stale entries.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
While doing some tests with our lcrash implementation I have seen a
naming conflict with prefix_info in kvm_host.h vs. addrconf.h
To avoid future conflicts lets rename private definitions in
asm/kvm_host.h by adding the kvm_s390 prefix.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Some machines do not accept 16EB as guest storage limit. Lets change the
default for the guest storage limit to a sane value. We also should set
the guest_origin to what userspace thinks it is. This allows guests
starting at an address != 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
This patch fixes a memory leak, we want to free the physmem when destroying
the vm.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Add missing module.h include to fix this:
CC arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Compiling a kernel with allmodconfig or allyesconfig results in tons
of gcc warnings, because the default maximum stacksize from which on
gcc will emit a warning is just 256 bytes.
Increase this to 2048, so these warnings don't distract from the real
warnings that we need to watch at.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Most likely it is broken anyway because of the changes in memory
detection. Since we can't test it and there are probably better ways
that using a P390 card, remove support for it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Move memory detection code to own file and also simplify it.
Also add an interface which can be called at any time to get the
current memory layout. This interface is needed by our kernel
internal system dumper.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Cc: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
As noted by Akinobu Mita in patch b1fceac2b9,
alloc_bootmem and related functions never return NULL and always return a
zeroed region of memory. Thus a NULL test or memset after calls to these
functions is unnecessary.
arch/s390/kernel/topology.c | 2 --
1 file changed, 2 deletions(-)
This was fixed using the following semantic patch.
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression E;
statement S;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
(
- BUG_ON (E == NULL);
|
- if (E == NULL) S
)
@@
expression E,E1;
@@
E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...)
... when != E
- memset(E,0,E1);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now it is possible to specify additional kernel parameters on the IPL
command line using the IPL PARM option.
If the Linux system is already running, the new reipl sysfs attribute
'parm' can be used to change kernel parameters for the next reboot.
Examples:
IPL C PARM dasd=1234 root=/dev/dasda1
IPL 1234 PARM savesys=mylnxnss
echo "init=/bin/bash" > /sys/firmware/reipl/ccw/parm
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
The idle notifier chain consists of at most one element. So there's
no point in having a notifier chain. Remove it and directly call the
function.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds a driver for subchannels of type chsc.
A device /dev/chsc is created which may be used to issue ioctls to:
- obtain information about the machine's I/O configuration
- dynamically change the machine's I/O configuration via
asynchronous chsc commands
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Add support for clock synchronization with the server time protocol.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
In case the initrd is located within the bss section it will be
overwritten when the section is cleared. To prevent this just move
the initrd right behind the bss section if it starts within the
section.
The current code already moves the initrd if the bootmem allocator
bitmap would overwrite it. With this patch we should be safe against
initrd corruptions.
Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add the user_regset definitions for normal and compat processes, replace
the dump_regs core dump cruft with the generic CORE_DUMP_USER_REGSET and
replace binfmt_elf32.c with the generic compat_binfmt_elf.c implementation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Using the ipldelay kernel parameter leads to a crash at IPL time.
Since this is broken since a long time it looks like nobody is using
it anymore. So remove it instead of fixing it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Avoid compile error by using EXPORT_SYMBOL_GPL(si_swapinfo) only if
CONFIG_SWAP is set.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Bevore issuing any s390 crypto operation check whether the
CPACF facility is enabled in the facility list. That way a
virtualization layer can prevent usage of the CPACF facility
regardless of the availability of the crypto instructions.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Andrew Morton reported this against linux-next:
ERROR: ".save_stack_trace" [tests/backtracetest.ko] undefined!
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
It's not even passed on to smp_call_function() anymore, since that
was removed. So kill it.
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
It's never used and the comments refer to nonatomic and retry
interchangably. So get rid of it.
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
KVM: MMU: Fix is_empty_shadow_page() check
KVM: MMU: Fix printk() format string
KVM: IOAPIC: only set remote_irr if interrupt was injected
KVM: MMU: reschedule during shadow teardown
KVM: VMX: Clear CR4.VMXE in hardware_disable
KVM: migrate PIT timer
KVM: ppc: Report bad GFNs
KVM: ppc: Use a read lock around MMU operations, and release it on error
KVM: ppc: Remove unmatched kunmap() call
KVM: ppc: add lwzx/stwz emulation
KVM: ppc: Remove duplicate function
KVM: s390: Fix race condition in kvm_s390_handle_wait
KVM: s390: Send program check on access error
KVM: s390: fix interrupt delivery
KVM: s390: handle machine checks when guest is running
KVM: s390: fix locking order problem in enable_sie
KVM: s390: use yield instead of schedule to implement diag 0x44
KVM: x86 emulator: fix hypercall return value on AMD
KVM: ia64: fix zero extending for mmio ld1/2/4 emulation in KVM
The first argument to __ctl_store() should be the array to store
stuff in, not just the first element of that array. With the
current code in __cpu_up(), mainline GCC dies with an internal
compiler error. I didn't diagnose that further, but just fixed
the kernel bug.
Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
If a memory range is supposed to be added to the 1:1 mapping and it
ends just below the maximum supported physical address it won't
succeed. This is because a test doesn't consider that the end address
is 1 smaller than start + size.
Fix the comparison.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In case of !64BIT kernel we end up with a zero sized mem_section array.
This happens because NR_MEM_SECTIONS is smaller than SECTIONS_PER_ROOT
but we have:
#define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT)
and
struct mem_section *mem_section[NR_SECTION_ROOTS];
So fix this by selecting SPARSEMEM_STATIC which makes sure
that SECTIONS_PER_ROOT is 1.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The call to add_timer was issued before local_int.lock was taken and before
timer_due was set to 0. If the timer expires before the lock is being taken,
the timer function will set timer_due to 1 and exit before the vcpu falls
asleep. Depending on other external events, the vcpu might sleep forever.
This fix pulls setting timer_due to the beginning of the function before
add_timer, which ensures correct behavior.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
If the guest accesses non-existing memory, the sie64a function returns
-EFAULT. We must check the return value and send a program check to the
guest if the sie instruction faulted, otherwise the guest will loop at
the faulting code.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The current code delivers pending interrupts before it checks for
need_resched. On a busy host, this can lead to a longer interrupt
latency if the interrupt is injected while the process is scheduled
away. This patch moves delivering the interrupt _after_ schedule(),
which makes more sense.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The low-level interrupt handler on s390 checks for _TIF_WORK_INT and
exits the guest context, if work is pending.
TIF_WORK_INT is defined as_TIF_SIGPENDING | _TIF_NEED_RESCHED |
_TIF_MCCK_PENDING. Currently the sie loop checks for signals and
reschedule, but it does not check for machine checks. That means that
we exit the guest context if a machine check is pending, but we do not
handle the machine check.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
There are potential locking problem in enable_sie. We take the task_lock
and the mmap_sem. As exit_mm uses the same locks vice versa, this triggers
a lockdep warning.
The second problem is that dup_mm and mmput might sleep, so we must not
hold the task_lock at that moment.
The solution is to dup the mm unconditional and use the task_lock before and
afterwards to check if we can use the new mm. dup_mm and mmput are called
outside the task_lock, but we run update_mm while holding the task_lock,
protection us against ptrace.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
diag 0x44 is the common way on s390 to yield the cpu to the hypervisor.
It is called by the guest in cpu_relax and in the spinlock code to
yield to other guest cpus.
This semantic is similar to yield. Lets replace the call to schedule with
yield to make sure that current is really yielding.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
The correct instruction format of idte is "idte r1,r3,r2" with
r1 at bit 24, r3 at bit 16 and r2 at bit 28.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Convert show_mem() so its nearly the same as on x86/powerpc.
Gives us proper locking and we get also rid of the only use of max_mapnr.
Also the number of pages was contained in an int which might not be
sufficient not too far in the future.
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use get_online_cpus() to prevent cpu hotplug in situations where
for_each_online_cpu() is called.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This fixes the last remaining section mismatch warnings in s390
architecture code. It reveals also a real bug introduced by... me
with git commit 2069e978d5
("[S390] sparsemem vmemmap: initialize memmap.")
Calling the generic vmemmap_alloc_block() function to get initialized
memory is a nice idea, however that function is __meminit annotated
and therefore the function might be gone if we try to call it later.
This can happen if a DCSS segment gets added.
So basically revert the patch and clear the memmap explicitly to fix
the original bug.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On s390 make allnoconfig fails with the following build error:
arch/s390/mm/init.c: In function 'show_mem':
arch/s390/mm/init.c:55: error: implicit declaration of function 'pfn_valid'
make[1]: *** [arch/s390/mm/init.o] Error 1
make: *** [arch/s390/mm] Error 2
This problem can by fixed ensuring that ARCH_SELECT_MEMORY_MODEL
is always turned on.
Signed-off-by: Hans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Surround all the code withing show_interrupts() with
get/put_online_cpus() to prevent strange results wrt cpu hotplug.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Both smp_call_function() and __smp_call_function_map() access
cpu_online_map. Both functions run with preemption disabled which
protects for cpus going offline. However new cpus can be added and
therefore the cpu_online_map can change unexpectedly.
So use the call_lock to protect against changes to the cpu_online_map
in start_secondary() and all smp_call_* functions.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We should use const char * for passing the name of the debug feature
around since it will not be changed.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Let's just use the generic vmmemmap_alloc_block() function which
always returns initialized memory.
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the existing arch_alloc_page/arch_free_page callbacks to do
the guest page state transitions between stable and unused.
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This removes redundant arch code for generic ptrace requests
already handled by ptrace_request and compat_ptrace_request.
It simplifies things to just have the standard entry points,
and use the generic compat_sys_ptrace.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it
was impossible to deliver a signal to a spinning guest. We used
preemption as a circumvention. The preemption notifiers called
vcpu_load, which checked for pending signals and triggered a host
intercept. But even with preemption, a sigkill was not delivered
immediately.
This patch changes the low level host interrupt handler to check for the
SIE instruction, if TIF_WORK is set. In that case we change the
instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm
code sees an intercept reason 0 if that happens. This patch adds accounting
for these types of intercept as well.
The advantages:
- works with and without preemption
- signals are delivered immediately
- much better host latencies without preemption
Acked-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On return from syscall or interrupt, we have to check if we return to
userspace (likely) and if there is work todo (less likely) to decide
if we handle the work. We can optimize this check: we first check for
the less likely work case and then check for userspace.
This patch is also a preparation for an additional patch, that fixes a bug
in KVM dealing with cpu bound guests.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This replaces the duplicated arch-specific versions of "sys_pipe()" with
one unified implementation. This removes almost 250 lines of duplicated
code.
It's marked __weak, so that *if* an architecture wants to override the
default implementation it can do so by simply having its own replacement
version, since many architectures use alternate calling conventions for
the 'pipe()' system call for legacy reasons (ie traditional UNIX
implementations often return the two file descriptors in registers)
I still haven't changed the cris version even though Linus says the BKL
isn't needed. The arch maintainer can easily do it if there are really
no obstacles.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TIF_RESTORE_SIGMASK no longer needs to be in the _TIF_WORK_* masks. Those low
bits are scarce, and are all used up now. Renumber TIF_RESTORE_SIGMASK to
free one up.
Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After the PT_IEEE_IP hack has been removed s390 can now use
the common code sys_ptrace function.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The self referential PT_IEEE_IP ptrace peek & poke calls have been
broken for that last 6 years. For peek the code always returns 0
instead of the last ieee fault and for poke the code does nothing.
Since nobody noticed the code seems to be superfluous. So lets
remove it.
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Convert s390 to SPARSEMEM and SPARSEMEM_VMEMMAP. We do a select
of SPARSEMEM_VMEMMAP since it is configurable. This is because
SPARSEMEM without SPARSEMEM_VMEMMAP gives us a hell of broken
include dependencies that I don't want to fix.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This adds hugetlbfs support on System z, using both hardware large page
support if available and software large page emulation on older hardware.
Shared (large) page tables are implemented in software emulation mode,
by using page->index of the first tail page from a compound large page
to store page table information.
Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
From: Heiko Carstens <heiko.carstens@de.ibm.com>
From: Carsten Otte <cotte@de.ibm.com>
This lets us use defines for the magic bits in machine flags instead
of using plain numbers all over the place.
In addition on newer machines features/facilities are indicated by the
result of the stfl instruction. So we use these bits instead of trying
to execute new instructions and check wether we get an exception or
not.
Also the mvpg instruction is always available when in zArch mode,
whereas the idte instruction is only available in zArch mode. This
results in some minor optimizations.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Always use clear_table to initialise page tables. The overlapping
memcpy is just a leftover of a previous version that wasn't fully
converted to clear_table.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch/s390/lib/uaccess_mvcos.c:166:
warning: 'strnlen_user_mvcos' defined but not used
arch/s390/lib/uaccess_mvcos.c:186:
warning: 'strncpy_from_user_mvcos' defined but not used
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When we get a notification that cpu topology changed, we schedule a
work struct which just calls arch_reinit_sched_domains. This function
in turn calls get_online_cpus() which results int the lockdep warning
below.
After all it turnded out that it's not legal to call get_online_cpus()
from the context of a multi-threaded work queue.
It could deadlock this way:
process 0 (events/cpu-x):
-> run_workqueue
-> removes my work_struct from the work queue
-> calls work_struct->fn
-> get_online_cpus()
-> locks on cpu_hotplug.lock since process 1 below is doing cpu hotplug
process 1:
-> cpu_down (for cpu-x)
-> cpu_hotplug_begin (holds cpu_hotplug.lock now)
-> cpu-x dead
-> notifier_call_chain with CPU_DEAD
-> cleanup_workqueue_thread
-> flush_cpu_workqueue (succeeds)
-> kthread_stop for events/cpu-x
-> now kthread_stop waits for my work_struct to complete from within
process 0. -> dead.
A single threaded workqueue wouldn't have such problems, however there is
no such common queue available and it's not worth to create one for the
very rare calls to arch_reinit_sched_domains.
So we just create a kernel thread from our work struct which calls
arch_reinit_sched_domains and are done with it.
Thanks to Oleg Nesterov and Peter Zijlstra for helping me figuring out
that this isn't a false positive lockdep warning:
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.25-03562-g3dc5063-dirty #12
-------------------------------------------------------
events/3/14 is trying to acquire lock:
(&cpu_hotplug.lock){--..}, at: [<0000000000076094>] get_online_cpus+0x50/0x78
but task is already holding lock:
(topology_work){--..}, at: [<0000000000059cde>] run_workqueue+0x106/0x278
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (topology_work){--..}:
[<000000000006fc74>] __lock_acquire+0x1010/0x111c
[<000000000006fe40>] lock_acquire+0xc0/0xf8
[<0000000000059d48>] run_workqueue+0x170/0x278
[<0000000000059edc>] worker_thread+0x8c/0xf0
[<000000000005f5bc>] kthread+0x68/0xa0
[<000000000001a33e>] kernel_thread_starter+0x6/0xc
[<000000000001a338>] kernel_thread_starter+0x0/0xc
-> #1 (events){--..}:
[<000000000006fc74>] __lock_acquire+0x1010/0x111c
[<000000000006fe40>] lock_acquire+0xc0/0xf8
[<000000000005a23c>] cleanup_workqueue_thread+0x60/0xa8
[<00000000003b2ab8>] workqueue_cpu_callback+0xbc/0x170
[<00000000003bba80>] notifier_call_chain+0x5c/0xa4
[<00000000000655a2>] __raw_notifier_call_chain+0x26/0x38
[<00000000000655e2>] raw_notifier_call_chain+0x2e/0x40
[<0000000000075e00>] cpu_down+0x228/0x31c
[<00000000003b1dd8>] store_online+0x64/0xb8
[<00000000001e7128>] sysdev_store+0x48/0x58
[<0000000000121cd2>] sysfs_write_file+0x126/0x1c0
[<00000000000c1944>] vfs_write+0xb0/0x15c
[<00000000000c20e6>] sys_write+0x56/0x88
[<0000000000027a68>] sys32_write+0x34/0x4c
[<0000000000023f70>] sysc_noemu+0x10/0x16
[<0000000077f3f186>] 0x77f3f186
-> #0 (&cpu_hotplug.lock){--..}:
[<000000000006fa84>] __lock_acquire+0xe20/0x111c
[<000000000006fe40>] lock_acquire+0xc0/0xf8
[<00000000003b701c>] mutex_lock_nested+0xd0/0x364
[<0000000000076094>] get_online_cpus+0x50/0x78
[<000000000003a03e>] arch_reinit_sched_domains+0x26/0x58
[<000000000002700e>] topology_work_fn+0x26/0x34
[<0000000000059d4e>] run_workqueue+0x176/0x278
[<0000000000059edc>] worker_thread+0x8c/0xf0
[<000000000005f5bc>] kthread+0x68/0xa0
[<000000000001a33e>] kernel_thread_starter+0x6/0xc
[<000000000001a338>] kernel_thread_starter+0x0/0xc
other info that might help us debug this:
2 locks held by events/3/14:
#0: (events){--..}, at: [<0000000000059cde>] run_workqueue+0x106/0x278
#1: (topology_work){--..}, at: [<0000000000059cde>] run_workqueue+0x106/0x278
stack backtrace:
CPU: 3 Not tainted 2.6.25-03562-g3dc5063-dirty #12
Process events/3 (pid: 14, task: 000000002fb04038, ksp: 000000002fb0bd70)
0400000000000000 000000002fb0ba40 0000000000000002 0000000000000000
000000002fb0bae0 000000002fb0ba58 000000002fb0ba58 0000000000016488
0000000000000000 000000002fb0bd70 0000000000000000 0000000000000000
000000002fb0ba40 000000000000000c 000000002fb0ba40 000000002fb0bab0
00000000003c99e0 0000000000016488 000000002fb0ba40 000000002fb0ba90
Call Trace:
([<00000000000163fc>] show_trace+0x138/0x158)
[<00000000000164e2>] show_stack+0xc6/0xf8
[<0000000000016624>] dump_stack+0xb0/0xc0
[<000000000006cd36>] print_circular_bug_tail+0xa2/0xb4
[<000000000006fa84>] __lock_acquire+0xe20/0x111c
[<000000000006fe40>] lock_acquire+0xc0/0xf8
[<00000000003b701c>] mutex_lock_nested+0xd0/0x364
[<0000000000076094>] get_online_cpus+0x50/0x78
[<000000000003a03e>] arch_reinit_sched_domains+0x26/0x58
[<000000000002700e>] topology_work_fn+0x26/0x34
[<0000000000059d4e>] run_workqueue+0x176/0x278
[<0000000000059edc>] worker_thread+0x8c/0xf0
[<000000000005f5bc>] kthread+0x68/0xa0
[<000000000001a33e>] kernel_thread_starter+0x6/0xc
[<000000000001a338>] kernel_thread_starter+0x0/0xc
INFO: lockdep is turned off.
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens