Commit Graph

15 Commits

Author SHA1 Message Date
NeilBrown 2699b67223 md: load/store badblock list from v1.x metadata
Space must have been allocated when array was created.
A feature flag is set when the badblock list is non-empty, to
ensure old kernels don't load and trust the whole device.

We only update the on-disk badblocklist when it has changed.
If the badblocklist (or other metadata) is stored on a bad block, we
don't cope very well.

If metadata has no room for bad block, flag bad-blocks as disabled,
and do the same for 0.90 metadata.

Signed-off-by: NeilBrown <neilb@suse.de>
2011-07-28 11:31:47 +10:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Andre Noll cdc2ae6d6a md: fix some comments.
1/ Raid5 has learned to take over also raid4 and raid6 arrays.
2/ new_chunk in mdp_superblock_1 is in sectors, not bytes.

Signed-off-by: NeilBrown <neilb@suse.de>
2009-06-18 08:46:47 +10:00
Jaswinder Singh Rajput bcf74582af headers_check fix: raid/md_p.h
fix the following 'make headers_check' warning:

  usr/include/linux/raid/md_p.h:85: found __[us]{8,16,32,64} type without #include <linux/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-30 23:32:45 +05:30
Cheng Renquan cd2ac9321c md: need another print_sb for mdp_superblock_1
md_print_devices is called in two code path: MD_BUG(...), and md_ioctl
with PRINT_RAID_DEBUG.  it will dump out all in use md devices
information;

However, it wrongly processed two types of superblock in one:

The header file <linux/raid/md_p.h> has defined two types of superblock,
struct mdp_superblock_s (typedefed with mdp_super_t) according to md with
metadata 0.90, and struct mdp_superblock_1 according to md with metadata
1.0 and later,

These two types of superblock are very different,

The md_print_devices code processed them both in mdp_super_t, that would
lead to wrong informaton dump like:

	[ 6742.345877]
	[ 6742.345887] md:	**********************************
	[ 6742.345890] md:	* <COMPLETE RAID STATE PRINTOUT> *
	[ 6742.345892] md:	**********************************
	[ 6742.345896] md1: <ram7><ram6><ram5><ram4>
	[ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
	[ 6742.345909] md: rdev superblock:
	[ 6742.345914] md:  SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d
	[ 6742.345918] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
	[ 6742.345922] md:     UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001
	[ 6742.345924]      D  0:  DISK<N:0,(1,8),R:0,S:6>
	[ 6742.345930]      D  1:  DISK<N:1,(1,10),R:1,S:6>
	[ 6742.345933]      D  2:  DISK<N:2,(1,12),R:2,S:6>
	[ 6742.345937]      D  3:  DISK<N:3,(1,14),R:3,S:6>
	[ 6742.345942] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
	...
	[ 6742.346058] md0: <ram3><ram2><ram1><ram0>
	[ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
	[ 6742.346070] md: rdev superblock:
	[ 6742.346073] md:  SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c
	[ 6742.346077] md:     L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610
	[ 6742.346081] md:     UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000
	[ 6742.346084]      D  0:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346089]      D  1:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346092]      D  2:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346096]      D  3:  DISK<N:-1,(-1,-1),R:-1,S:-1>
	[ 6742.346102] md:     THIS:  DISK<N:0,(0,0),R:0,S:0>
	...
	[ 6742.346219] md:	**********************************
	[ 6742.346221]

Here md1 is metadata 0.90.0, and md0 is metadata 1.2

After some more code to distinguish these two types of superblock, in this patch,

it will generate dump information like:

	[ 7906.755790]
	[ 7906.755799] md:	**********************************
	[ 7906.755802] md:	* <COMPLETE RAID STATE PRINTOUT> *
	[ 7906.755804] md:	**********************************
	[ 7906.755808] md1: <ram7><ram6><ram5><ram4>
	[ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
	[ 7906.755821] md: rdev superblock (MJ:0):
	[ 7906.755826] md:  SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3
	[ 7906.755830] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
	[ 7906.755834] md:     UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001
	[ 7906.755836]      D  0:  DISK<N:0,(1,8),R:0,S:6>
	[ 7906.755842]      D  1:  DISK<N:1,(1,10),R:1,S:6>
	[ 7906.755845]      D  2:  DISK<N:2,(1,12),R:2,S:6>
	[ 7906.755849]      D  3:  DISK<N:3,(1,14),R:3,S:6>
	[ 7906.755855] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
	...
	[ 7906.755972] md0: <ram3><ram2><ram1><ram0>
	[ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
	[ 7906.755984] md: rdev superblock (MJ:1):
	[ 7906.755989] md:  SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd>
	[ 7906.755990] md:    Name: "DG5:0" CT:1226410480
	[ 7906.755998] md:       L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0
	[ 7906.755999] md:     Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a
	[ 7906.756001] md:       (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829
	[ 7906.756003] md:         (MaxDev:384)
	...
	[ 7906.756113] md:	**********************************
	[ 7906.756116]

this md0 (metadata 1.2) information dumping is exactly according to struct
mdp_superblock_1.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de>
2009-01-09 08:31:08 +11:00
Andre Noll 7e93a89251 md: Remove some unused macros.
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: Neil Brown <neilb@suse.de>
2008-07-11 22:02:23 +10:00
NeilBrown 1c05b4bc22 [PATCH] md: endian annotation for v1 superblock access
Includes a couple of bugfixes found by sparse.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-21 13:35:05 -07:00
NeilBrown 5fd6c1dce0 [PATCH] md: allow checkpoint of recovery with version-1 superblock
For a while we have had checkpointing of resync.  The version-1 superblock
allows recovery to be checkpointed as well, and this patch implements that.

Due to early carelessness we need to add a feature flag to signal that the
recovery_offset field is in use, otherwise older kernels would assume that a
partially recovered array is in fact fully recovered.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:37 -07:00
NeilBrown 6f91fe88e4 [PATCH] md: make sure 64bit fields in version-1 metadata are 64-bit aligned
reshape_position is a 64bit field that was not 64bit aligned.  So swap with
new_level.

NOTE: this is a user-visible change.  However:
  - The bad code has not appeared in a released kernel
  - This code is still marked 'experimental'
  - This only affects version-1 superblock, which are not in wide use
  - These field are only used (rather than simply reported) by user-space
    tools in extemely rare circumstances : after a reshape crashes in the
    first second of the reshape process.

So I believe that, at this stage, the change is safe.  Especially if people
heed the 'help' message on use mdadm-2.4.1.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 06:18:30 -07:00
NeilBrown f67055780c [PATCH] md: Checkpoint and allow restart of raid5 reshape
We allow the superblock to record an 'old' and a 'new' geometry, and a
position where any conversion is up to.  The geometry allows for changing
chunksize, layout and level as well as number of devices.

When using verion-0.90 superblock, we convert the version to 0.91 while the
conversion is happening so that an old kernel will refuse the assemble the
array.  For version-1, we use a feature bit for the same effect.

When starting an array we check for an incomplete reshape and restart the
reshape process if needed.  If the reshape stopped at an awkward time (like
when updating the first stripe) we refuse to assemble the array, and let
user-space worry about it.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 08:45:01 -08:00
NeilBrown 71c0805cb4 [PATCH] md: allow md to load a superblock with feature-bit '1' set
As this is used to flag an internal bitmap.

Also, introduce symbolic names for feature bits.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:39:11 -07:00
NeilBrown 8ddf9efe67 [PATCH] md: support write-mostly device in raid1
This allows a device in a raid1 to be marked as "write mostly".  Read requests
will only be sent if there is no other option.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09 16:39:10 -07:00
NeilBrown 39730960d9 [PATCH] Two small fixes for md verion-1 superblocks.
1/ Must typecast int to (sector_t) before inverting or we
 might not invert enough bits.

2/ When "bitmap_offset" was added to mdp_superblock_1, we didn't increase
   the count of words-used (96 to 100).

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:47 -07:00
NeilBrown a654b9d8f8 [PATCH] md: allow md intent bitmap to be stored near the superblock.
This provides an alternate to storing the bitmap in a separate file.  The
bitmap can be stored at a given offset from the superblock.  Obviously the
creator of the array must make sure this doesn't intersect with data....
After is good for version-0.90 superblocks.

Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 19:07:47 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00