If transparent huge pages are enabled, we can isolate many more pages
than we actually need to scan, because we count both single and huge
pages equally in isolate_lru_pages().
Since commit 5bc7b8aca9 ("mm: thp: add split tail pages to shrink
page list in page reclaim"), we scan all the tail pages immediately
after a huge page split (see shrink_page_list()). As a result, we can
reclaim up to SWAP_CLUSTER_MAX * HPAGE_PMD_NR (512 MB) in one run!
This is easy to catch on memcg reclaim with zswap enabled. The latter
makes swapout instant so that if we happen to scan an unreferenced huge
page we will evict both its head and tail pages immediately, which is
likely to result in excessive reclaim.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup structure is defined in mm/memcontrol.c currently which means
that the code outside of this file has to use external API even for
trivial access stuff.
This patch exports mm_struct with its dependencies and makes some of the
exported functions inlines. This even helps to reduce the code size a bit
(make defconfig + CONFIG_MEMCG=y)
text data bss dec hex filename
12355346 1823792 1089536 15268674 e8fb42 vmlinux.before
12354970 1823792 1089536 15268298 e8f9ca vmlinux.after
This is not much (370B) but better than nothing.
We also save a function call in some hot paths like callers of
mem_cgroup_count_vm_event which is used for accounting.
The patch doesn't introduce any functional changes.
[vdavykov@parallels.com: inline memcg_kmem_is_active]
[vdavykov@parallels.com: do not expose type outside of CONFIG_MEMCG]
[akpm@linux-foundation.org: memcontrol.h needs eventfd.h for eventfd_ctx]
[akpm@linux-foundation.org: export mem_cgroup_from_task() to modules]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a PTE is unmapped and it's dirty then it was writable recently. Due to
deferred TLB flushing, it's best to assume a writable TLB cache entry
exists. With that assumption, the TLB must be flushed before any IO can
start or the page is freed to avoid lost writes or data corruption. This
patch defers flushing of potentially writable TLBs as long as possible.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An IPI is sent to flush remote TLBs when a page is unmapped that was
potentially accesssed by other CPUs. There are many circumstances where
this happens but the obvious one is kswapd reclaiming pages belonging to a
running process as kswapd and the task are likely running on separate
CPUs.
On small machines, this is not a significant problem but as machine gets
larger with more cores and more memory, the cost of these IPIs can be
high. This patch uses a simple structure that tracks CPUs that
potentially have TLB entries for pages being unmapped. When the unmapping
is complete, the full TLB is flushed on the assumption that a refill cost
is lower than flushing individual entries.
Architectures wishing to do this must give the following guarantee.
If a clean page is unmapped and not immediately flushed, the
architecture must guarantee that a write to that linear address
from a CPU with a cached TLB entry will trap a page fault.
This is essentially what the kernel already depends on but the window is
much larger with this patch applied and is worth highlighting. The
architecture should consider whether the cost of the full TLB flush is
higher than sending an IPI to flush each individual entry. An additional
architecture helper called flush_tlb_local is required. It's a trivial
wrapper with some accounting in the x86 case.
The impact of this patch depends on the workload as measuring any benefit
requires both mapped pages co-located on the LRU and memory pressure. The
case with the biggest impact is multiple processes reading mapped pages
taken from the vm-scalability test suite. The test case uses NR_CPU
readers of mapped files that consume 10*RAM.
Linear mapped reader on a 4-node machine with 64G RAM and 48 CPUs
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 159.62 ( 0.00%) 120.68 ( 24.40%)
Ops lru-file-mmap-read-time_range 30.59 ( 0.00%) 2.80 ( 90.85%)
Ops lru-file-mmap-read-time_stddv 6.70 ( 0.00%) 0.64 ( 90.38%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 581.00 611.43
System 5804.93 4111.76
Elapsed 161.03 122.12
This is showing that the readers completed 24.40% faster with 29% less
system CPU time. From vmstats, it is known that the vanilla kernel was
interrupted roughly 900K times per second during the steady phase of the
test and the patched kernel was interrupts 180K times per second.
The impact is lower on a single socket machine.
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
Ops lru-file-mmap-read-elapsed 25.33 ( 0.00%) 20.38 ( 19.54%)
Ops lru-file-mmap-read-time_range 0.91 ( 0.00%) 1.44 (-58.24%)
Ops lru-file-mmap-read-time_stddv 0.28 ( 0.00%) 0.47 (-65.34%)
4.2.0-rc1 4.2.0-rc1
vanilla flushfull-v7
User 58.09 57.64
System 111.82 76.56
Elapsed 27.29 22.55
It's still a noticeable improvement with vmstat showing interrupts went
from roughly 500K per second to 45K per second.
The patch will have no impact on workloads with no memory pressure or have
relatively few mapped pages. It will have an unpredictable impact on the
workload running on the CPU being flushed as it'll depend on how many TLB
entries need to be refilled and how long that takes. Worst case, the TLB
will be completely cleared of active entries when the target PFNs were not
resident at all.
[sasha.levin@oracle.com: trace tlb flush after disabling preemption in try_to_unmap_flush]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nikolay has reported a hang when a memcg reclaim got stuck with the
following backtrace:
PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync"
#0 __schedule at ffffffff815ab152
#1 schedule at ffffffff815ab76e
#2 schedule_timeout at ffffffff815ae5e5
#3 io_schedule_timeout at ffffffff815aad6a
#4 bit_wait_io at ffffffff815abfc6
#5 __wait_on_bit at ffffffff815abda5
#6 wait_on_page_bit at ffffffff8111fd4f
#7 shrink_page_list at ffffffff81135445
#8 shrink_inactive_list at ffffffff81135845
#9 shrink_lruvec at ffffffff81135ead
#10 shrink_zone at ffffffff811360c3
#11 shrink_zones at ffffffff81136eff
#12 do_try_to_free_pages at ffffffff8113712f
#13 try_to_free_mem_cgroup_pages at ffffffff811372be
#14 try_charge at ffffffff81189423
#15 mem_cgroup_try_charge at ffffffff8118c6f5
#16 __add_to_page_cache_locked at ffffffff8112137d
#17 add_to_page_cache_lru at ffffffff81121618
#18 pagecache_get_page at ffffffff8112170b
#19 grow_dev_page at ffffffff811c8297
#20 __getblk_slow at ffffffff811c91d6
#21 __getblk_gfp at ffffffff811c92c1
#22 ext4_ext_grow_indepth at ffffffff8124565c
#23 ext4_ext_create_new_leaf at ffffffff81246ca8
#24 ext4_ext_insert_extent at ffffffff81246f09
#25 ext4_ext_map_blocks at ffffffff8124a848
#26 ext4_map_blocks at ffffffff8121a5b7
#27 mpage_map_one_extent at ffffffff8121b1fa
#28 mpage_map_and_submit_extent at ffffffff8121f07b
#29 ext4_writepages at ffffffff8121f6d5
#30 do_writepages at ffffffff8112c490
#31 __filemap_fdatawrite_range at ffffffff81120199
#32 filemap_flush at ffffffff8112041c
#33 ext4_alloc_da_blocks at ffffffff81219da1
#34 ext4_rename at ffffffff81229b91
#35 ext4_rename2 at ffffffff81229e32
#36 vfs_rename at ffffffff811a08a5
#37 SYSC_renameat2 at ffffffff811a3ffc
#38 sys_renameat2 at ffffffff811a408e
#39 sys_rename at ffffffff8119e51e
#40 system_call_fastpath at ffffffff815afa89
Dave Chinner has properly pointed out that this is a deadlock in the
reclaim code because ext4 doesn't submit pages which are marked by
PG_writeback right away.
The heuristic was introduced by commit e62e384e9d ("memcg: prevent OOM
with too many dirty pages") and it was applied only when may_enter_fs
was specified. The code has been changed by c3b94f44fc ("memcg:
further prevent OOM with too many dirty pages") which has removed the
__GFP_FS restriction with a reasoning that we do not get into the fs
code. But this is not sufficient apparently because the fs doesn't
necessarily submit pages marked PG_writeback for IO right away.
ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily
submit the bio. Instead it tries to map more pages into the bio and
mpage_map_one_extent might trigger memcg charge which might end up
waiting on a page which is marked PG_writeback but hasn't been submitted
yet so we would end up waiting for something that never finishes.
Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2)
before we go to wait on the writeback. The page fault path, which is
the only path that triggers memcg oom killer since 3.12, shouldn't
require GFP_NOFS and so we shouldn't reintroduce the premature OOM
killer issue which was originally addressed by the heuristic.
As per David Chinner the xfs is doing similar thing since 2.6.15 already
so ext4 is not the only affected filesystem. Moreover he notes:
: For example: IO completion might require unwritten extent conversion
: which executes filesystem transactions and GFP_NOFS allocations. The
: writeback flag on the pages can not be cleared until unwritten
: extent conversion completes. Hence memory reclaim cannot wait on
: page writeback to complete in GFP_NOFS context because it is not
: safe to do so, memcg reclaim or otherwise.
Cc: stable@vger.kernel.org # 3.9+
[tytso@mit.edu: corrected the control flow]
Fixes: c3b94f44fc ("memcg: further prevent OOM with too many dirty pages")
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
The name SWAP implies that we are dealing with anonymous pages only. In
fact, the original patch that introduced the min_unmapped_ratio logic
was to fix an issue related to file pages. Rename it to RECLAIM_UNMAP
to match what does.
Historically, commit a6dc60f897 ("vmscan: rename sc.may_swap to
may_unmap") renamed .may_swap to .may_unmap, leaving RECLAIM_SWAP
behind. commit 2e2e425989 ("vmscan,memcg: reintroduce sc->may_swap")
reintroduced .may_swap for memory controller.
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Based upon 675becce15 ("mm: vmscan: do not throttle based on pfmemalloc
reserves if node has no ZONE_NORMAL") from Mel.
We have a system with the following topology:
# numactl -H
available: 3 nodes (0,2-3)
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
23 24 25 26 27 28 29 30 31
node 0 size: 28273 MB
node 0 free: 27323 MB
node 2 cpus:
node 2 size: 16384 MB
node 2 free: 0 MB
node 3 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
node 3 size: 30533 MB
node 3 free: 13273 MB
node distances:
node 0 2 3
0: 10 20 20
2: 20 10 20
3: 20 20 10
Node 2 has no free memory, because:
# cat /sys/devices/system/node/node2/hugepages/hugepages-16777216kB/nr_hugepages
1
This leads to the following zoneinfo:
Node 2, zone DMA
pages free 0
min 1840
low 2300
high 2760
scanned 0
spanned 262144
present 262144
managed 262144
...
all_unreclaimable: 1
If one then attempts to allocate some normal 16M hugepages via
echo 37 > /proc/sys/vm/nr_hugepages
The echo never returns and kswapd2 consumes CPU cycles.
This is because throttle_direct_reclaim ends up calling
wait_event(pfmemalloc_wait, pfmemalloc_watermark_ok...).
pfmemalloc_watermark_ok() in turn checks all zones on the node if there
are any reserves, and if so, then indicates the watermarks are ok, by
seeing if there are sufficient free pages.
675becce15 added a condition already for memoryless nodes. In this case,
though, the node has memory, it is just all consumed (and not
reclaimable). Effectively, though, the result is the same on this call to
pfmemalloc_watermark_ok() and thus seems like a reasonable additional
condition.
With this change, the afore-mentioned 16M hugepage allocation attempt
succeeds and correctly round-robins between Nodes 1 and 3.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because writeback wasn't cgroup aware before, the usual dirty
throttling mechanism in balance_dirty_pages() didn't work for
processes under memcg limit. The writeback path didn't know how much
memory is available or how fast the dirty pages are being written out
for a given memcg and balance_dirty_pages() didn't have any measure of
IO back pressure for the memcg.
To work around the issue, memcg implemented an ad-hoc dirty throttling
mechanism in the direct reclaim path by stalling on pages under
writeback which are encountered during direct reclaim scan. This is
rather ugly and crude - none of the configurability, fairness, or
bandwidth-proportional distribution of the normal path.
The previous patches implemented proper memcg aware dirty throttling
when cgroup writeback is in use making the ad-hoc mechanism
unnecessary. This patch disables direct reclaim stalling for such
case.
Note: I disabled the parts which seemed obvious and it behaves fine
while testing but my understanding of this code path is
rudimentary and it's quite possible that I got something wrong.
Please let me know if I got some wrong or more global_reclaim()
sites should be updated.
v2: The original patch removed the direct stalling mechanism which
breaks legacy hierarchies. Conditionalize instead of removing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In several places, bdi_congested() and its wrappers are used to
determine whether more IOs should be issued. With cgroup writeback
support, this question can't be answered solely based on the bdi
(backing_dev_info). It's dependent on whether the filesystem and bdi
support cgroup writeback and the blkcg the inode is associated with.
This patch implements inode_congested() and its wrappers which take
@inode and determines the congestion state considering cgroup
writeback. The new functions replace bdi_*congested() calls in places
where the query is about specific inode and task.
There are several filesystem users which also fit this criteria but
they should be updated when each filesystem implements cgroup
writeback support.
v2: Now that a given inode is associated with only one wb, congestion
state can be determined independent from the asking task. Drop
@task. Spotted by Vivek. Also, converted to take @inode instead
of @mapping and renamed to inode_congested().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where
global NR_FILE_DIRTY is managed. The new memcg stat is visible in the
per memcg memory.stat cgroupfs file. The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632
The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback. It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).
The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter. The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
memcg = mem_cgroup_begin_page_stat(page)
if (TestSetPageDirty()) {
[...]
mem_cgroup_update_page_stat(memcg)
}
mem_cgroup_end_page_stat(memcg)
Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
rcu_read_lock()
- With CONFIG_MEMCG and inter memcg task movement, it's
rcu_read_lock() + spin_lock_irqsave()
A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().
Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
__mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
__delete_from_page_cache(), replace_page_cache_page(),
invalidate_complete_page2(), and __remove_mapping().
text data bss dec hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
+192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
+773 text bytes
Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for
all metrics, they're all wall clock or cycle counts. The read and write
fault benchmarks just measure fault time, they do not include I/O time.
* CONFIG_MEMCG not set:
baseline patched
kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples)
dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03%
dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99%
dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77%
read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples)
write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples)
* CONFIG_MEMCG=y root_memcg:
baseline patched
kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples)
dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90%
dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33%
dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00%
read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples)
write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples)
* CONFIG_MEMCG=y non-root_memcg:
baseline patched
kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples)
dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82%
dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27%
dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52%
read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples)
write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples)
As expected anon page faults are not affected by this patch.
tj: Updated to apply on top of the recent cancel_dirty_page() changes.
Signed-off-by: Sha Zhengju <handai.szj@gmail.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Merge third set of updates from Andrew Morton:
- the rest of MM
[ This includes getting rid of the numa hinting bits, in favor of
just generic protnone logic. Yay. - Linus ]
- core kernel
- procfs
- some of lib/ (lots of lib/ material this time)
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (104 commits)
lib/lcm.c: replace include
lib/percpu_ida.c: remove redundant includes
lib/strncpy_from_user.c: replace module.h include
lib/stmp_device.c: replace module.h include
lib/sort.c: move include inside #if 0
lib/show_mem.c: remove redundant include
lib/radix-tree.c: change to simpler include
lib/plist.c: remove redundant include
lib/nlattr.c: remove redundant include
lib/kobject_uevent.c: remove redundant include
lib/llist.c: remove redundant include
lib/md5.c: simplify include
lib/list_sort.c: rearrange includes
lib/genalloc.c: remove redundant include
lib/idr.c: remove redundant include
lib/halfmd4.c: simplify includes
lib/dynamic_queue_limits.c: simplify includes
lib/sort.c: use simpler includes
lib/interval_tree.c: simplify includes
hexdump: make it return number of bytes placed in buffer
...
This patch adds SHRINKER_MEMCG_AWARE flag. If a shrinker has this flag
set, it will be called per memory cgroup. The memory cgroup to scan
objects from is passed in shrink_control->memcg. If the memory cgroup
is NULL, a memcg aware shrinker is supposed to scan objects from the
global list. Unaware shrinkers are only called on global pressure with
memcg=NULL.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Greg Thelen <gthelen@google.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull backing device changes from Jens Axboe:
"This contains a cleanup of how the backing device is handled, in
preparation for a rework of the life time rules. In this part, the
most important change is to split the unrelated nommu mmap flags from
it, but also removing a backing_dev_info pointer from the
address_space (and inode), and a cleanup of other various minor bits.
Christoph did all the work here, I just fixed an oops with pages that
have a swap backing. Arnd fixed a missing export, and Oleg killed the
lustre backing_dev_info from staging. Last patch was from Al,
unexporting parts that are now no longer needed outside"
* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
Make super_blocks and sb_lock static
mtd: export new mtd_mmap_capabilities
fs: make inode_to_bdi() handle NULL inode
staging/lustre/llite: get rid of backing_dev_info
fs: remove default_backing_dev_info
fs: don't reassign dirty inodes to default_backing_dev_info
nfs: don't call bdi_unregister
ceph: remove call to bdi_unregister
fs: remove mapping->backing_dev_info
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
nilfs2: set up s_bdi like the generic mount_bdev code
block_dev: get bdev inode bdi directly from the block device
block_dev: only write bdev inode on close
fs: introduce f_op->mmap_capabilities for nommu mmap support
fs: kill BDI_CAP_SWAP_BACKED
fs: deduplicate noop_backing_dev_info
Introduce the basic control files to account, partition, and limit
memory using cgroups in default hierarchy mode.
This interface versioning allows us to address fundamental design
issues in the existing memory cgroup interface, further explained
below. The old interface will be maintained indefinitely, but a
clearer model and improved workload performance should encourage
existing users to switch over to the new one eventually.
The control files are thus:
- memory.current shows the current consumption of the cgroup and its
descendants, in bytes.
- memory.low configures the lower end of the cgroup's expected
memory consumption range. The kernel considers memory below that
boundary to be a reserve - the minimum that the workload needs in
order to make forward progress - and generally avoids reclaiming
it, unless there is an imminent risk of entering an OOM situation.
- memory.high configures the upper end of the cgroup's expected
memory consumption range. A cgroup whose consumption grows beyond
this threshold is forced into direct reclaim, to work off the
excess and to throttle new allocations heavily, but is generally
allowed to continue and the OOM killer is not invoked.
- memory.max configures the hard maximum amount of memory that the
cgroup is allowed to consume before the OOM killer is invoked.
- memory.events shows event counters that indicate how often the
cgroup was reclaimed while below memory.low, how often it was
forced to reclaim excess beyond memory.high, how often it hit
memory.max, and how often it entered OOM due to memory.max. This
allows users to identify configuration problems when observing a
degradation in workload performance. An overcommitted system will
have an increased rate of low boundary breaches, whereas increased
rates of high limit breaches, maximum hits, or even OOM situations
will indicate internally overcommitted cgroups.
For existing users of memory cgroups, the following deviations from
the current interface are worth pointing out and explaining:
- The original lower boundary, the soft limit, is defined as a limit
that is per default unset. As a result, the set of cgroups that
global reclaim prefers is opt-in, rather than opt-out. The costs
for optimizing these mostly negative lookups are so high that the
implementation, despite its enormous size, does not even provide
the basic desirable behavior. First off, the soft limit has no
hierarchical meaning. All configured groups are organized in a
global rbtree and treated like equal peers, regardless where they
are located in the hierarchy. This makes subtree delegation
impossible. Second, the soft limit reclaim pass is so aggressive
that it not just introduces high allocation latencies into the
system, but also impacts system performance due to overreclaim, to
the point where the feature becomes self-defeating.
The memory.low boundary on the other hand is a top-down allocated
reserve. A cgroup enjoys reclaim protection when it and all its
ancestors are below their low boundaries, which makes delegation
of subtrees possible. Secondly, new cgroups have no reserve per
default and in the common case most cgroups are eligible for the
preferred reclaim pass. This allows the new low boundary to be
efficiently implemented with just a minor addition to the generic
reclaim code, without the need for out-of-band data structures and
reclaim passes. Because the generic reclaim code considers all
cgroups except for the ones running low in the preferred first
reclaim pass, overreclaim of individual groups is eliminated as
well, resulting in much better overall workload performance.
- The original high boundary, the hard limit, is defined as a strict
limit that can not budge, even if the OOM killer has to be called.
But this generally goes against the goal of making the most out of
the available memory. The memory consumption of workloads varies
during runtime, and that requires users to overcommit. But doing
that with a strict upper limit requires either a fairly accurate
prediction of the working set size or adding slack to the limit.
Since working set size estimation is hard and error prone, and
getting it wrong results in OOM kills, most users tend to err on
the side of a looser limit and end up wasting precious resources.
The memory.high boundary on the other hand can be set much more
conservatively. When hit, it throttles allocations by forcing
them into direct reclaim to work off the excess, but it never
invokes the OOM killer. As a result, a high boundary that is
chosen too aggressively will not terminate the processes, but
instead it will lead to gradual performance degradation. The user
can monitor this and make corrections until the minimal memory
footprint that still gives acceptable performance is found.
In extreme cases, with many concurrent allocations and a complete
breakdown of reclaim progress within the group, the high boundary
can be exceeded. But even then it's mostly better to satisfy the
allocation from the slack available in other groups or the rest of
the system than killing the group. Otherwise, memory.max is there
to limit this type of spillover and ultimately contain buggy or
even malicious applications.
- The original control file names are unwieldy and inconsistent in
many different ways. For example, the upper boundary hit count is
exported in the memory.failcnt file, but an OOM event count has to
be manually counted by listening to memory.oom_control events, and
lower boundary / soft limit events have to be counted by first
setting a threshold for that value and then counting those events.
Also, usage and limit files encode their units in the filename.
That makes the filenames very long, even though this is not
information that a user needs to be reminded of every time they
type out those names.
To address these naming issues, as well as to signal clearly that
the new interface carries a new configuration model, the naming
conventions in it necessarily differ from the old interface.
- The original limit files indicate the state of an unset limit with
a very high number, and a configured limit can be unset by echoing
-1 into those files. But that very high number is implementation
and architecture dependent and not very descriptive. And while -1
can be understood as an underflow into the highest possible value,
-2 or -10M etc. do not work, so it's not inconsistent.
memory.low, memory.high, and memory.max will use the string
"infinity" to indicate and set the highest possible value.
[akpm@linux-foundation.org: use seq_puts() for basic strings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit b2052564e6 ("mm: memcontrol: continue cache reclaim from
offlined groups") pages charged to a memory cgroup are not reparented when
the cgroup is removed. Instead, they are supposed to be reclaimed in a
regular way, along with pages accounted to online memory cgroups.
However, an lruvec of an offline memory cgroup will sooner or later get so
small that it will be scanned only at low scan priorities (see
get_scan_count()). Therefore, if there are enough reclaimable pages in
big lruvecs, pages accounted to offline memory cgroups will never be
scanned at all, wasting memory.
Fix this by unconditionally forcing scanning dead lruvecs from kswapd.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kswapd in balance_pgdate() currently uses wake_up() on processes waiting
in throttle_direct_reclaim(), which only wakes up a single process. This
might leave processes waiting for longer than necessary, until the check
is reached in the next loop iteration. Processes might also be left
waiting if zone was fully balanced in single iteration. Note that the
comment in balance_pgdat() also says "Wake them", so waking up a single
process does not seem intentional.
Thus, replace wake_up() with wake_up_all().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case. Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Charles Shirron and Paul Cassella from Cray Inc have reported kswapd
stuck in a busy loop with nothing left to balance, but
kswapd_try_to_sleep() failing to sleep. Their analysis found the cause
to be a combination of several factors:
1. A process is waiting in throttle_direct_reclaim() on pgdat->pfmemalloc_wait
2. The process has been killed (by OOM in this case), but has not yet been
scheduled to remove itself from the waitqueue and die.
3. kswapd checks for throttled processes in prepare_kswapd_sleep():
if (waitqueue_active(&pgdat->pfmemalloc_wait)) {
wake_up(&pgdat->pfmemalloc_wait);
return false; // kswapd will not go to sleep
}
However, for a process that was already killed, wake_up() does not remove
the process from the waitqueue, since try_to_wake_up() checks its state
first and returns false when the process is no longer waiting.
4. kswapd is running on the same CPU as the only CPU that the process is
allowed to run on (through cpus_allowed, or possibly single-cpu system).
5. CONFIG_PREEMPT_NONE=y kernel is used. If there's nothing to balance, kswapd
encounters no voluntary preemption points and repeatedly fails
prepare_kswapd_sleep(), blocking the process from running and removing
itself from the waitqueue, which would let kswapd sleep.
So, the source of the problem is that we prevent kswapd from going to
sleep until there are processes waiting on the pfmemalloc_wait queue,
and a process waiting on a queue is guaranteed to be removed from the
queue only when it gets scheduled. This was done to make sure that no
process is left sleeping on pfmemalloc_wait when kswapd itself goes to
sleep.
However, it isn't necessary to postpone kswapd sleep until the
pfmemalloc_wait queue actually empties. To prevent processes from being
left sleeping, it's actually enough to guarantee that all processes
waiting on pfmemalloc_wait queue have been woken up by the time we put
kswapd to sleep.
This patch therefore fixes this issue by substituting 'wake_up' with
'wake_up_all' and removing 'return false' in the code snippet from
prepare_kswapd_sleep() above. Note that if any process puts itself in
the queue after this waitqueue_active() check, or after the wake up
itself, it means that the process will also wake up kswapd - and since
we are under prepare_to_wait(), the wake up won't be missed. Also we
update the comment prepare_kswapd_sleep() to hopefully more clearly
describe the races it is preventing.
Fixes: 5515061d22 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [3.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The slab shrinkers are currently invoked from the zonelist walkers in
kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the
eligible LRU pages and assemble a nodemask to pass to NUMA-aware
shrinkers, which then again have to walk over the nodemask. This is
redundant code, extra runtime work, and fairly inaccurate when it comes to
the estimation of actually scannable LRU pages. The code duplication will
only get worse when making the shrinkers cgroup-aware and requiring them
to have out-of-band cgroup hierarchy walks as well.
Instead, invoke the shrinkers from shrink_zone(), which is where all
reclaimers end up, to avoid this duplication.
Take the count for eligible LRU pages out of get_scan_count(), which
considers many more factors than just the availability of swap space, like
zone_reclaimable_pages() currently does. Accumulate the number over all
visited lruvecs to get the per-zone value.
Some nodes have multiple zones due to memory addressing restrictions. To
avoid putting too much pressure on the shrinkers, only invoke them once
for each such node, using the class zone of the allocation as the pivot
zone.
For now, this integrates the slab shrinking better into the reclaim logic
and gets rid of duplicative invocations from kswapd, direct reclaim, and
zone reclaim. It also prepares for cgroup-awareness, allowing
memcg-capable shrinkers to be added at the lruvec level without much
duplication of both code and runtime work.
This changes kswapd behavior, which used to invoke the shrinkers for each
zone, but with scan ratios gathered from the entire node, resulting in
meaningless pressure quantities on multi-zone nodes.
Zone reclaim behavior also changes. It used to shrink slabs until the
same amount of pages were shrunk as were reclaimed from the LRUs. Now it
merely invokes the shrinkers once with the zone's scan ratio, which makes
the shrinkers go easier on caches that implement aging and would prefer
feeding back pressure from recently used slab objects to unused LRU pages.
[vdavydov@parallels.com: assure class zone is populated]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup update from Tejun Heo:
"cpuset got simplified a bit. cgroup core got a fix on unified
hierarchy and grew some effective css related interfaces which will be
used for blkio support for writeback IO traffic which is currently
being worked on"
* 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: implement cgroup_get_e_css()
cgroup: add cgroup_subsys->css_e_css_changed()
cgroup: add cgroup_subsys->css_released()
cgroup: fix the async css offline wait logic in cgroup_subtree_control_write()
cgroup: restructure child_subsys_mask handling in cgroup_subtree_control_write()
cgroup: separate out cgroup_calc_child_subsys_mask() from cgroup_refresh_child_subsys_mask()
cpuset: lock vs unlock typo
cpuset: simplify cpuset_node_allowed API
cpuset: convert callback_mutex to a spinlock
Compaction relies on zone watermark checks for decisions such as if it's
worth to start compacting in compaction_suitable() or whether compaction
should stop in compact_finished(). The watermark checks take
classzone_idx and alloc_flags parameters, which are related to the memory
allocation request. But from the context of compaction they are currently
passed as 0, including the direct compaction which is invoked to satisfy
the allocation request, and could therefore know the proper values.
The lack of proper values can lead to mismatch between decisions taken
during compaction and decisions related to the allocation request. Lack
of proper classzone_idx value means that lowmem_reserve is not taken into
account. This has manifested (during recent changes to deferred
compaction) when DMA zone was used as fallback for preferred Normal zone.
compaction_suitable() without proper classzone_idx would think that the
watermarks are already satisfied, but watermark check in
get_page_from_freelist() would fail. Because of this problem, deferring
compaction has extra complexity that can be removed in the following
patch.
The issue (not confirmed in practice) with missing alloc_flags is opposite
in nature. For allocations that include ALLOC_HIGH, ALLOC_HIGHER or
ALLOC_CMA in alloc_flags (the last includes all MOVABLE allocations on
CMA-enabled systems) the watermark checking in compaction with 0 passed
will be stricter than in get_page_from_freelist(). In these cases
compaction might be running for a longer time than is really needed.
Another issue compaction_suitable() is that the check for "does the zone
need compaction at all?" comes only after the check "does the zone have
enough free free pages to succeed compaction". The latter considers extra
pages for migration and can therefore in some situations fail and return
COMPACT_SKIPPED, although the high-order allocation would succeed and we
should return COMPACT_PARTIAL.
This patch fixes these problems by adding alloc_flags and classzone_idx to
struct compact_control and related functions involved in direct compaction
and watermark checking. Where possible, all other callers of
compaction_suitable() pass proper values where those are known. This is
currently limited to classzone_idx, which is sometimes known in kswapd
context. However, the direct reclaim callers should_continue_reclaim()
and compaction_ready() do not currently know the proper values, so the
coordination between reclaim and compaction may still not be as accurate
as it could. This can be fixed later, if it's shown to be an issue.
Additionaly the checks in compact_suitable() are reordered to address the
second issue described above.
The effect of this patch should be slightly better high-order allocation
success rates and/or less compaction overhead, depending on the type of
allocations and presence of CMA. It allows simplifying deferred
compaction code in a followup patch.
When testing with stress-highalloc, there was some slight improvement
(which might be just due to variance) in success rates of non-THP-like
allocations.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_page_list() counts all pages with a mapping, including clean pages,
toward nr_congested if they're on a write-congested BDI.
shrink_inactive_list() then sets ZONE_CONGESTED if nr_dirty ==
nr_congested. Fix this apples-to-oranges comparison by only counting
pages for nr_congested if they count for nr_dirty.
Signed-off-by: Jamie Liu <jamieliu@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch replaces printk(KERN_ERR..) with pr_err found under
shrink_slab. Thus it also reduces one line extra because of formatting.
Signed-off-by: Pintu Kumar <pintu.k@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Current cpuset API for checking if a zone/node is allowed to allocate
from looks rather awkward. We have hardwall and softwall versions of
cpuset_node_allowed with the softwall version doing literally the same
as the hardwall version if __GFP_HARDWALL is passed to it in gfp flags.
If it isn't, the softwall version may check the given node against the
enclosing hardwall cpuset, which it needs to take the callback lock to
do.
Such a distinction was introduced by commit 02a0e53d82 ("cpuset:
rework cpuset_zone_allowed api"). Before, we had the only version with
the __GFP_HARDWALL flag determining its behavior. The purpose of the
commit was to avoid sleep-in-atomic bugs when someone would mistakenly
call the function without the __GFP_HARDWALL flag for an atomic
allocation. The suffixes introduced were intended to make the callers
think before using the function.
However, since the callback lock was converted from mutex to spinlock by
the previous patch, the softwall check function cannot sleep, and these
precautions are no longer necessary.
So let's simplify the API back to the single check.
Suggested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In a memcg with even just moderate cache pressure, success rates for
transparent huge page allocations drop to zero, wasting a lot of effort
that the allocator puts into assembling these pages.
The reason for this is that the memcg reclaim code was never designed for
higher-order charges. It reclaims in small batches until there is room
for at least one page. Huge page charges only succeed when these batches
add up over a series of huge faults, which is unlikely under any
significant load involving order-0 allocations in the group.
Remove that loop on the memcg side in favor of passing the actual reclaim
goal to direct reclaim, which is already set up and optimized to meet
higher-order goals efficiently.
This brings memcg's THP policy in line with the system policy: if the
allocator painstakingly assembles a hugepage, memcg will at least make an
honest effort to charge it. As a result, transparent hugepage allocation
rates amid cache activity are drastically improved:
vanilla patched
pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%)
pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%)
pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%)
thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%)
thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%)
[ Note: this may in turn increase memory consumption from internal
fragmentation, which is an inherent risk of transparent hugepages.
Some setups may have to adjust the memcg limits accordingly to
accomodate this - or, if the machine is already packed to capacity,
disable the transparent huge page feature. ]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Hansen <dave@sr71.net>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim tests zone_is_reclaim_dirty(), but the site that actually
sets this state does zone_set_flag(zone, ZONE_TAIL_LRU_DIRTY), sending the
reader through layers indirection just to track down a simple bit.
Remove all zone flag wrappers and just use bitops against zone->flags
directly. It's just as readable and the lines are barely any longer.
Also rename ZONE_TAIL_LRU_DIRTY to ZONE_DIRTY to match ZONE_WRITEBACK, and
remove the zone_flags_t typedef.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The deprecation warnings for the scan_unevictable interface triggers by
scripts doing `sysctl -a | grep something else'. This is annoying and not
helpful.
The interface has been defunct since 264e56d824 ("mm: disable user
interface to manually rescue unevictable pages"), which was in 2011, and
there haven't been any reports of usecases for it, only reports that the
deprecation warnings are annying. It's unlikely that anybody is using
this interface specifically at this point, so remove it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When direct sync compaction is often unsuccessful, it may become deferred
for some time to avoid further useless attempts, both sync and async.
Successful high-order allocations un-defer compaction, while further
unsuccessful compaction attempts prolong the compaction deferred period.
Currently the checking and setting deferred status is performed only on
the preferred zone of the allocation that invoked direct compaction. But
compaction itself is attempted on all eligible zones in the zonelist, so
the behavior is suboptimal and may lead both to scenarios where 1)
compaction is attempted uselessly, or 2) where it's not attempted despite
good chances of succeeding, as shown on the examples below:
1) A direct compaction with Normal preferred zone failed and set
deferred compaction for the Normal zone. Another unrelated direct
compaction with DMA32 as preferred zone will attempt to compact DMA32
zone even though the first compaction attempt also included DMA32 zone.
In another scenario, compaction with Normal preferred zone failed to
compact Normal zone, but succeeded in the DMA32 zone, so it will not
defer compaction. In the next attempt, it will try Normal zone which
will fail again, instead of skipping Normal zone and trying DMA32
directly.
2) Kswapd will balance DMA32 zone and reset defer status based on
watermarks looking good. A direct compaction with preferred Normal
zone will skip compaction of all zones including DMA32 because Normal
was still deferred. The allocation might have succeeded in DMA32, but
won't.
This patch makes compaction deferring work on individual zone basis
instead of preferred zone. For each zone, it checks compaction_deferred()
to decide if the zone should be skipped. If watermarks fail after
compacting the zone, defer_compaction() is called. The zone where
watermarks passed can still be deferred when the allocation attempt is
unsuccessful. When allocation is successful, compaction_defer_reset() is
called for the zone containing the allocated page. This approach should
approximate calling defer_compaction() only on zones where compaction was
attempted and did not yield allocated page. There might be corner cases
but that is inevitable as long as the decision to stop compacting dues not
guarantee that a page will be allocated.
Due to a new COMPACT_DEFERRED return value, some functions relying
implicitly on COMPACT_SKIPPED = 0 had to be updated, with comments made
more accurate. The did_some_progress output parameter of
__alloc_pages_direct_compact() is removed completely, as the caller
actually does not use it after compaction sets it - it is only considered
when direct reclaim sets it.
During testing on a two-node machine with a single very small Normal zone
on node 1, this patch has improved success rates in stress-highalloc
mmtests benchmark. The success here were previously made worse by commit
3a025760fc ("mm: page_alloc: spill to remote nodes before waking
kswapd") as kswapd was no longer resetting often enough the deferred
compaction for the Normal zone, and DMA32 zones on both nodes were thus
not considered for compaction. On different machine, success rates were
improved with __GFP_NO_KSWAPD allocations.
[akpm@linux-foundation.org: fix CONFIG_COMPACTION=n build]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pages are now uncharged at release time, and all sources of batched
uncharges operate on lists of pages. Directly use those lists, and
get rid of the per-task batching state.
This also batches statistics accounting, in addition to the res
counter charges, to reduce IRQ-disabling and re-enabling.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memcg uncharging code that is involved towards the end of a page's
lifetime - truncation, reclaim, swapout, migration - is impressively
complicated and fragile.
Because anonymous and file pages were always charged before they had their
page->mapping established, uncharges had to happen when the page type
could still be known from the context; as in unmap for anonymous, page
cache removal for file and shmem pages, and swap cache truncation for swap
pages. However, these operations happen well before the page is actually
freed, and so a lot of synchronization is necessary:
- Charging, uncharging, page migration, and charge migration all need
to take a per-page bit spinlock as they could race with uncharging.
- Swap cache truncation happens during both swap-in and swap-out, and
possibly repeatedly before the page is actually freed. This means
that the memcg swapout code is called from many contexts that make
no sense and it has to figure out the direction from page state to
make sure memory and memory+swap are always correctly charged.
- On page migration, the old page might be unmapped but then reused,
so memcg code has to prevent untimely uncharging in that case.
Because this code - which should be a simple charge transfer - is so
special-cased, it is not reusable for replace_page_cache().
But now that charged pages always have a page->mapping, introduce
mem_cgroup_uncharge(), which is called after the final put_page(), when we
know for sure that nobody is looking at the page anymore.
For page migration, introduce mem_cgroup_migrate(), which is called after
the migration is successful and the new page is fully rmapped. Because
the old page is no longer uncharged after migration, prevent double
charges by decoupling the page's memcg association (PCG_USED and
pc->mem_cgroup) from the page holding an actual charge. The new bits
PCG_MEM and PCG_MEMSW represent the respective charges and are transferred
to the new page during migration.
mem_cgroup_migrate() is suitable for replace_page_cache() as well,
which gets rid of mem_cgroup_replace_page_cache(). However, care
needs to be taken because both the source and the target page can
already be charged and on the LRU when fuse is splicing: grab the page
lock on the charge moving side to prevent changing pc->mem_cgroup of a
page under migration. Also, the lruvecs of both pages change as we
uncharge the old and charge the new during migration, and putback may
race with us, so grab the lru lock and isolate the pages iff on LRU to
prevent races and ensure the pages are on the right lruvec afterward.
Swap accounting is massively simplified: because the page is no longer
uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can
transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry
before the final put_page() in page reclaim.
Finally, page_cgroup changes are now protected by whatever protection the
page itself offers: anonymous pages are charged under the page table lock,
whereas page cache insertions, swapin, and migration hold the page lock.
Uncharging happens under full exclusion with no outstanding references.
Charging and uncharging also ensure that the page is off-LRU, which
serializes against charge migration. Remove the very costly page_cgroup
lock and set pc->flags non-atomically.
[mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable]
[vdavydov@parallels.com: fix flags definition]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Tested-by: Jet Chen <jet.chen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When memory cgoups are enabled, the code that decides to force to scan
anonymous pages in get_scan_count() compares global values (free,
high_watermark) to a value that is restricted to a memory cgroup (file).
It make the code over-eager to force anon scan.
For instance, it will force anon scan when scanning a memcg that is
mainly populated by anonymous page, even when there is plenty of file
pages to get rid of in others memcgs, even when swappiness == 0. It
breaks user's expectation about swappiness and hurts performance.
This patch makes sure that forced anon scan only happens when there not
enough file pages for the all zone, not just in one random memcg.
[hannes@cmpxchg.org: cleanups]
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Quite a while ago, get_scan_ratio() has been renamed get_scan_count(),
however a comment in shrink_active_list() still mention it. This patch
fixes the outdated comment.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zone->pages_scanned is a write-intensive cache line during page reclaim
and it's also updated during page free. Move the counter into vmstat to
take advantage of the per-cpu updates and do not update it in the free
paths unless necessary.
On a small UMA machine running tiobench the difference is marginal. On
a 4-node machine the overhead is more noticable. Note that automatic
NUMA balancing was disabled for this test as otherwise the system CPU
overhead is unpredictable.
3.16.0-rc3 3.16.0-rc3 3.16.0-rc3
vanillarearrange-v5 vmstat-v5
User 746.94 759.78 774.56
System 65336.22 58350.98 32847.27
Elapsed 27553.52 27282.02 27415.04
Note that the overhead reduction will vary depending on where exactly
pages are allocated and freed.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vm_total_pages is calculated by nr_free_pagecache_pages(), which counts
the number of pages which are beyond the high watermark within all
zones. So vm_total_pages is not equal to total number of pages which
the VM controls.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Swappiness is determined for each scanned memcg individually in
shrink_zone() and is not a parameter that applies throughout the reclaim
scan. Move it out of struct scan_control to prevent accidental use of a
stale value.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct reclaim currently calls shrink_zones() to reclaim all members of
a zonelist, and if that wasn't successful it does another pass through
the same zonelist to check overall reclaimability.
Just check reclaimability in shrink_zones() directly and propagate the
result through the return value. Then remove all_unreclaimable().
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim for a higher-order page runs until compaction is ready,
then aborts and signals this situation through the return value of
shrink_zones(). This is an oddly specific signal to encode in the
return value of shrink_zones(), though, and can be quite confusing.
Introduce sc->compaction_ready and signal the compactability of the
zones out-of-band to free up the return value of shrink_zones() for
actual zone reclaimability.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_zones() has a special branch to skip the all_unreclaimable()
check during hibernation, because a frozen kswapd can't mark a zone
unreclaimable.
But ever since commit 6e543d5780 ("mm: vmscan: fix
do_try_to_free_pages() livelock"), determining a zone to be
unreclaimable is done by directly looking at its scan history and no
longer relies on kswapd setting the per-zone flag.
Remove this branch and let shrink_zones() check the reclaimability of
the target zones regardless of hibernation state.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <Kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
shrink_inactive_list() used to wait 0.1s to avoid congestion when all
the pages that were isolated from the inactive list were dirty but not
under active writeback. That makes no real sense, and apparently causes
major interactivity issues under some loads since 3.11.
The ostensible reason for it was to wait for kswapd to start writing
pages, but that seems questionable as well, since the congestion wait
code seems to trigger for kswapd itself as well. Also, the logic behind
delaying anything when we haven't actually started writeback is not
clear - it only delays actually starting that writeback.
We'll still trigger the congestion waiting if
(a) the process is kswapd, and we hit pages flagged for immediate
reclaim
(b) the process is not kswapd, and the zone backing dev writeback is
actually congested.
This probably needs to be revisited, but as it is this fixes a reported
regression.
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Pinpointed-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
printk is meant to be used with an associated log level. There are some
instances of printk scattered around the mm code where the log level is
missing. Add a log level and adhere to suggestions by
scripts/checkpatch.pl by moving to the pr_* macros.
Also add the typical pr_fmt definition so that print statements can be
easily traced back to the modules where they occur, correlated one with
another, etc. This will require the removal of some (now redundant)
prefixes on a few print statements.
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory reclaim always uses swappiness of the reclaim target memcg
(origin of the memory pressure) or vm_swappiness for global memory
reclaim. This behavior was consistent (except for difference between
global and hard limit reclaim) because swappiness was enforced to be
consistent within each memcg hierarchy.
After "mm: memcontrol: remove hierarchy restrictions for swappiness and
oom_control" each memcg can have its own swappiness independent of
hierarchical parents, though, so the consistency guarantee is gone.
This can lead to an unexpected behavior. Say that a group is explicitly
configured to not swapout by memory.swappiness=0 but its memory gets
swapped out anyway when the memory pressure comes from its parent with a
It is also unexpected that the knob is meaningless without setting the
hard limit which would trigger the reclaim and enforce the swappiness.
There are setups where the hard limit is configured higher in the
hierarchy by an administrator and children groups are under control of
somebody else who is interested in the swapout behavior but not
necessarily about the memory limit.
From a semantic point of view swappiness is an attribute defining anon
vs.
file proportional scanning of LRU which is memcg specific (unlike
charges which are propagated up the hierarchy) so it should be applied
to the particular memcg's LRU regardless where the memory pressure comes
from.
This patch removes vmscan_swappiness() and stores the swappiness into
the scan_control structure. mem_cgroup_swappiness is then used to
provide the correct value before shrink_lruvec is called. The global
vm_swappiness is used for the root memcg.
[hughd@google.com: oopses immediately when booted with cgroup_disable=memory]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kswapd exits, it can end up taking locks that were previously held
by allocating tasks while they waited for reclaim. Lockdep currently
warns about this:
On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote:
> inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage.
> kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes:
> (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130
> {RECLAIM_FS-ON-W} state was registered at:
> mark_held_locks+0xb9/0x140
> lockdep_trace_alloc+0x7a/0xe0
> kmem_cache_alloc_trace+0x37/0x240
> flex_array_alloc+0x99/0x1a0
> cgroup_attach_task+0x63/0x430
> attach_task_by_pid+0x210/0x280
> cgroup_procs_write+0x16/0x20
> cgroup_file_write+0x120/0x2c0
> vfs_write+0xc0/0x1f0
> SyS_write+0x4c/0xa0
> tracesys+0xdd/0xe2
> irq event stamp: 49
> hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70
> hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0
> softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0
> softirqs last disabled at (0): (null)
>
> other info that might help us debug this:
> Possible unsafe locking scenario:
>
> CPU0
> ----
> lock(&sig->group_rwsem);
> <Interrupt>
> lock(&sig->group_rwsem);
>
> *** DEADLOCK ***
>
> no locks held by kswapd2/1151.
>
> stack backtrace:
> CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4
> Call Trace:
> dump_stack+0x19/0x1b
> print_usage_bug+0x1f7/0x208
> mark_lock+0x21d/0x2a0
> __lock_acquire+0x52a/0xb60
> lock_acquire+0xa2/0x140
> down_read+0x51/0xa0
> exit_signals+0x24/0x130
> do_exit+0xb5/0xa50
> kthread+0xdb/0x100
> ret_from_fork+0x7c/0xb0
This is because the kswapd thread is still marked as a reclaimer at the
time of exit. But because it is exiting, nobody is actually waiting on
it to make reclaim progress anymore, and it's nothing but a regular
thread at this point. Be tidy and strip it of all its powers
(PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state)
before returning from the thread function.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit "mm: vmscan: obey proportional scanning requirements for kswapd"
ensured that file/anon lists were scanned proportionally for reclaim from
kswapd but ignored it for direct reclaim. The intent was to minimse
direct reclaim latency but Yuanhan Liu pointer out that it substitutes one
long stall for many small stalls and distorts aging for normal workloads
like streaming readers/writers. Hugh Dickins pointed out that a
side-effect of the same commit was that when one LRU list dropped to zero
that the entirety of the other list was shrunk leading to excessive
reclaim in memcgs. This patch scans the file/anon lists proportionally
for direct reclaim to similarly age page whether reclaimed by kswapd or
direct reclaim but takes care to abort reclaim if one LRU drops to zero
after reclaiming the requested number of pages.
Based on ext4 and using the Intel VM scalability test
3.15.0-rc5 3.15.0-rc5
shrinker proportion
Unit lru-file-readonce elapsed 5.3500 ( 0.00%) 5.4200 ( -1.31%)
Unit lru-file-readonce time_range 0.2700 ( 0.00%) 0.1400 ( 48.15%)
Unit lru-file-readonce time_stddv 0.1148 ( 0.00%) 0.0536 ( 53.33%)
Unit lru-file-readtwice elapsed 8.1700 ( 0.00%) 8.1700 ( 0.00%)
Unit lru-file-readtwice time_range 0.4300 ( 0.00%) 0.2300 ( 46.51%)
Unit lru-file-readtwice time_stddv 0.1650 ( 0.00%) 0.0971 ( 41.16%)
The test cases are running multiple dd instances reading sparse files. The results are within
the noise for the small test machine. The impact of the patch is more noticable from the vmstats
3.15.0-rc5 3.15.0-rc5
shrinker proportion
Minor Faults 35154 36784
Major Faults 611 1305
Swap Ins 394 1651
Swap Outs 4394 5891
Allocation stalls 118616 44781
Direct pages scanned 4935171 4602313
Kswapd pages scanned 15921292 16258483
Kswapd pages reclaimed 15913301 16248305
Direct pages reclaimed 4933368 4601133
Kswapd efficiency 99% 99%
Kswapd velocity 670088.047 682555.961
Direct efficiency 99% 99%
Direct velocity 207709.217 193212.133
Percentage direct scans 23% 22%
Page writes by reclaim 4858.000 6232.000
Page writes file 464 341
Page writes anon 4394 5891
Note that there are fewer allocation stalls even though the amount
of direct reclaim scanning is very approximately the same.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, we use (zone->managed_pages + KSWAPD_ZONE_BALANCE_GAP_RATIO-1)
/ KSWAPD_ZONE_BALANCE_GAP_RATIO to avoid a zero gap value. It's better to
use DIV_ROUND_UP macro for neater code and clear meaning.
Besides, the gap value is calculated against the per-zone "managed pages",
not "present pages". This patch also corrects the comment and do some
rephrasing.
Signed-off-by: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
cold is a bool, make it one. Make the likely case the "if" part of the
block instead of the else as according to the optimisation manual this is
preferred.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we are doing NUMA-aware shrinking, and can have shrinkers
running in parallel, or working on individual nodes, it seems like we
should also be sticking the node in the output.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was looking at a trace of the slab shrinkers (attachment in this comment):
https://bugs.freedesktop.org/show_bug.cgi?id=72742#c67
and noticed that "total_scan" can go negative in some cases. We
used to dump out the "total_scan" variable directly, but some of
the shrinker modifications along the way changed that.
This patch just dumps it out directly, again. It doesn't make
any sense to derive it from new_nr and nr any more since there
are now other shrinkers that can be running in parallel and
mucking with those values.
Here's an example of the negative numbers in the output:
> kswapd0-840 [000] 160.869398: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 10 new scan count 39 total_scan 29 last shrinker return val 256
> kswapd0-840 [000] 160.869618: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 39 new scan count 102 total_scan 63 last shrinker return val 256
> kswapd0-840 [000] 160.870031: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 102 new scan count 47 total_scan -55 last shrinker return val 768
> kswapd0-840 [000] 160.870464: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 47 new scan count 45 total_scan -2 last shrinker return val 768
> kswapd0-840 [000] 163.384144: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 45 new scan count 56 total_scan 11 last shrinker return val 0
> kswapd0-840 [000] 163.384297: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 56 new scan count 15 total_scan -41 last shrinker return val 256
> kswapd0-840 [000] 163.384414: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 15 new scan count 117 total_scan 102 last shrinker return val 0
> kswapd0-840 [000] 163.384657: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 117 new scan count 36 total_scan -81 last shrinker return val 512
> kswapd0-840 [000] 163.384880: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 36 new scan count 111 total_scan 75 last shrinker return val 256
> kswapd0-840 [000] 163.385256: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 111 new scan count 34 total_scan -77 last shrinker return val 768
> kswapd0-840 [000] 163.385598: mm_shrink_slab_end: i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 34 new scan count 122 total_scan 88 last shrinker return val 512
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a loopback NFS mount is active and the backing device for the NFS
mount becomes congested, that can impose throttling delays on the nfsd
threads.
These delays significantly reduce throughput and so the NFS mount remains
congested.
This results in a livelock and the reduced throughput persists.
This livelock has been found in testing with the 'wait_iff_congested'
call, and could possibly be caused by the 'congestion_wait' call.
This livelock is similar to the deadlock which justified the introduction
of PF_LESS_THROTTLE, and the same flag can be used to remove this
livelock.
To minimise the impact of the change, we still throttle nfsd when the
filesystem it is writing to is congested, but not when some separate
filesystem (e.g. the NFS filesystem) is congested.
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
throttle_direct_reclaim() is meant to trigger during swap-over-network
during which the min watermark is treated as a pfmemalloc reserve. It
throttes on the first node in the zonelist but this is flawed.
The user-visible impact is that a process running on CPU whose local
memory node has no ZONE_NORMAL will stall for prolonged periods of time,
possibly indefintely. This is due to throttle_direct_reclaim thinking the
pfmemalloc reserves are depleted when in fact they don't exist on that
node.
On a NUMA machine running a 32-bit kernel (I know) allocation requests
from CPUs on node 1 would detect no pfmemalloc reserves and the process
gets throttled. This patch adjusts throttling of direct reclaim to
throttle based on the first node in the zonelist that has a usable
ZONE_NORMAL or lower zone.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmem_cache_{create,destroy,shrink} need to get a stable value of
cpu/node online mask, because they init/destroy/access per-cpu/node
kmem_cache parts, which can be allocated or destroyed on cpu/mem
hotplug. To protect against cpu hotplug, these functions use
{get,put}_online_cpus. However, they do nothing to synchronize with
memory hotplug - taking the slab_mutex does not eliminate the
possibility of race as described in patch 2.
What we need there is something like get_online_cpus, but for memory.
We already have lock_memory_hotplug, which serves for the purpose, but
it's a bit of a hammer right now, because it's backed by a mutex. As a
result, it imposes some limitations to locking order, which are not
desirable, and can't be used just like get_online_cpus. That's why in
patch 1 I substitute it with get/put_online_mems, which work exactly
like get/put_online_cpus except they block not cpu, but memory hotplug.
[ v1 can be found at https://lkml.org/lkml/2014/4/6/68. I NAK'ed it by
myself, because it used an rw semaphore for get/put_online_mems,
making them dead lock prune. ]
This patch (of 2):
{un}lock_memory_hotplug, which is used to synchronize against memory
hotplug, is currently backed by a mutex, which makes it a bit of a
hammer - threads that only want to get a stable value of online nodes
mask won't be able to proceed concurrently. Also, it imposes some
strong locking ordering rules on it, which narrows down the set of its
usage scenarios.
This patch introduces get/put_online_mems, which are the same as
get/put_online_cpus, but for memory hotplug, i.e. executing a code
inside a get/put_online_mems section will guarantee a stable value of
online nodes, present pages, etc.
lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prior to this change, we would decide whether to force scan a LRU during
reclaim if that LRU itself was too small for the current priority.
However, this can lead to the file LRU getting force scanned even if
there are a lot of anonymous pages we can reclaim, leading to hot file
pages getting needlessly reclaimed.
To address this, we instead only force scan when none of the reclaimable
LRUs are big enough.
Gives huge improvements with zswap. For example, when doing -j20 kernel
build in a 500MB container with zswap enabled, runtime (in seconds) is
greatly reduced:
x without this change
+ with this change
N Min Max Median Avg Stddev
x 5 700.997 790.076 763.928 754.05 39.59493
+ 5 141.634 197.899 155.706 161.9 21.270224
Difference at 95.0% confidence
-592.15 +/- 46.3521
-78.5293% +/- 6.14709%
(Student's t, pooled s = 31.7819)
Should also give some improvements in regular (non-zswap) swap cases.
Yes, hughd found significant speedup using regular swap, with several
memcgs under pressure; and it should also be effective in the non-memcg
case, whenever one or another zone LRU is forced too small.
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: Seth Jennings <sjennings@variantweb.net>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Luigi Semenzato <semenzato@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 0bf1457f0c ("mm: vmscan: do not swap anon pages
just because free+file is low") because it introduced a regression in
mostly-anonymous workloads, where reclaim would become ineffective and
trap every allocating task in direct reclaim.
The problem is that there is a runaway feedback loop in the scan balance
between file and anon, where the balance tips heavily towards a tiny
thrashing file LRU and anonymous pages are no longer being looked at.
The commit in question removed the safe guard that would detect such
situations and respond with forced anonymous reclaim.
This commit was part of a series to fix premature swapping in loads with
relatively little cache, and while it made a small difference, the cure
is obviously worse than the disease. Revert it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim force-scans / swaps anonymous pages when file cache drops
below the high watermark of a zone in order to prevent what little cache
remains from thrashing.
However, on bigger machines the high watermark value can be quite large
and when the workload is dominated by a static anonymous/shmem set, the
file set might just be a small window of used-once cache. In such
situations, the VM starts swapping heavily when instead it should be
recycling the no longer used cache.
This is a longer-standing problem, but it's more likely to trigger after
commit 81c0a2bb51 ("mm: page_alloc: fair zone allocator policy")
because file pages can no longer accumulate in a single zone and are
dispersed into smaller fractions among the available zones.
To resolve this, do not force scan anon when file pages are low but
instead rely on the scan/rotation ratios to make the right prediction.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: <stable@kernel.org> [3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We abort direct reclaim if we find the zone is ready for compaction.
Sometimes the zone is just a promoted highmem zone to force a scan of
highmem, which is not the intended zone the caller want to allocate a
page from. In this situation, setting aborted_reclaim to indicate the
caller turned back to retry the allocation is waste of time and could
cause a loop in __alloc_pages_slowpath().
This patch does not check compaction_ready() on promoted zones to avoid
the above situation. Only set aborted_reclaim if the caller intended
zone is ready for compaction.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We promote sc->gfp_mask to __GFP_HIGHMEM to forcibly scan highmem if
there are too many buffer_heads pinning highmem. See cc715d99e5 ("mm:
vmscan: forcibly scan highmem if there are too many buffer_heads pinning
highmem").
This patch restores sc->gfp_mask to its caller original value after
finishing the scan job, to avoid the impact on other invocations from
its upper caller, such as vmpressure_prio(), shrink_slab().
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VM maintains cached filesystem pages on two types of lists. One
list holds the pages recently faulted into the cache, the other list
holds pages that have been referenced repeatedly on that first list.
The idea is to prefer reclaiming young pages over those that have shown
to benefit from caching in the past. We call the recently usedbut
ultimately was not significantly better than a FIFO policy and still
thrashed cache based on eviction speed, rather than actual demand for
cache.
This patch solves one half of the problem by decoupling the ability to
detect working set changes from the inactive list size. By maintaining
a history of recently evicted file pages it can detect frequently used
pages with an arbitrarily small inactive list size, and subsequently
apply pressure on the active list based on actual demand for cache, not
just overall eviction speed.
Every zone maintains a counter that tracks inactive list aging speed.
When a page is evicted, a snapshot of this counter is stored in the
now-empty page cache radix tree slot. On refault, the minimum access
distance of the page can be assessed, to evaluate whether the page
should be part of the active list or not.
This fixes the VM's blindness towards working set changes in excess of
the inactive list. And it's the foundation to further improve the
protection ability and reduce the minimum inactive list size of 50%.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page. As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently. At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.
Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate. Reclaim will check
for this flag before installing shadow pages.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name `max_pass' is misleading, because this variable actually keeps
the estimate number of freeable objects, not the maximal number of
objects we can scan in this pass, which can be twice that. Rename it to
reflect its actual meaning.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no need passing on a shrink_control struct from
try_to_free_pages() and friends to do_try_to_free_pages() and then to
shrink_zones(), because it is only used in shrink_zones() and the only
field initialized on the top level is gfp_mask, which is always equal to
scan_control.gfp_mask. So let's move shrink_control initialization to
shrink_zones().
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reduces the indentation level of do_try_to_free_pages() and removes
extra loop over all eligible zones counting the number of on-LRU pages.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reviewed-by: Glauber Costa <glommer@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When direct reclaim is executed by a process bound to a set of NUMA
nodes, we should scan only those nodes when possible, but currently we
will scan kmem from all online nodes even if the kmem shrinker is NUMA
aware. That said, binding a process to a particular NUMA node won't
prevent it from shrinking inode/dentry caches from other nodes, which is
not good. Fix this.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The VM is currently heavily tuned to avoid swapping. Whether that is
good or bad is a separate discussion, but as long as the VM won't swap
to make room for dirty cache, we can not consider anonymous pages when
calculating the amount of dirtyable memory, the baseline to which
dirty_background_ratio and dirty_ratio are applied.
A simple workload that occupies a significant size (40+%, depending on
memory layout, storage speeds etc.) of memory with anon/tmpfs pages and
uses the remainder for a streaming writer demonstrates this problem. In
that case, the actual cache pages are a small fraction of what is
considered dirtyable overall, which results in an relatively large
portion of the cache pages to be dirtied. As kswapd starts rotating
these, random tasks enter direct reclaim and stall on IO.
Only consider free pages and file pages dirtyable.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Tested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a shrinker is not NUMA-aware, shrink_slab() should call it exactly
once with nid=0, but currently it is not true: if node 0 is not set in
the nodemask or if it is not online, we will not call such shrinkers at
all. As a result some slabs will be left untouched under some
circumstances. Let us fix it.
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Reported-by: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When reclaiming kmem, we currently don't scan slabs that have less than
batch_size objects (see shrink_slab_node()):
while (total_scan >= batch_size) {
shrinkctl->nr_to_scan = batch_size;
shrinker->scan_objects(shrinker, shrinkctl);
total_scan -= batch_size;
}
If there are only a few shrinkers available, such a behavior won't cause
any problems, because the batch_size is usually small, but if we have a
lot of slab shrinkers, which is perfectly possible since FS shrinkers
are now per-superblock, we can end up with hundreds of megabytes of
practically unreclaimable kmem objects. For instance, mounting a
thousand of ext2 FS images with a hundred of files in each and iterating
over all the files using du(1) will result in about 200 Mb of FS caches
that cannot be dropped even with the aid of the vm.drop_caches sysctl!
This problem was initially pointed out by Glauber Costa [*]. Glauber
proposed to fix it by making the shrink_slab() always take at least one
pass, to put it simply, turning the scan loop above to a do{}while()
loop. However, this proposal was rejected, because it could result in
more aggressive and frequent slab shrinking even under low memory
pressure when total_scan is naturally very small.
This patch is a slightly modified version of Glauber's approach.
Similarly to Glauber's patch, it makes shrink_slab() scan less than
batch_size objects, but only if the total number of objects we want to
scan (total_scan) is greater than the total number of objects available
(max_pass). Since total_scan is biased as half max_pass if the current
delta change is small:
if (delta < max_pass / 4)
total_scan = min(total_scan, max_pass / 2);
this is only possible if we are scanning at high prio. That said, this
patch shouldn't change the vmscan behaviour if the memory pressure is
low, but if we are tight on memory, we will do our best by trying to
reclaim all available objects, which sounds reasonable.
[*] http://www.spinics.net/lists/cgroups/msg06913.html
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most of the VM_BUG_ON assertions are performed on a page. Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.
I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.
This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.
[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit 3b38722efd ("memcg, vmscan: integrate soft reclaim
tighter with zone shrinking code")
I merged this prematurely - Michal and Johannes still disagree about the
overall design direction and the future remains unclear.
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit a5b7c87f92 ("vmscan, memcg: do softlimit reclaim also
for targeted reclaim")
I merged this prematurely - Michal and Johannes still disagree about the
overall design direction and the future remains unclear.
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit de57780dc6 ("memcg: enhance memcg iterator to support
predicates")
I merged this prematurely - Michal and Johannes still disagree about the
overall design direction and the future remains unclear.
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit e839b6a1c8 ("memcg, vmscan: do not attempt soft limit
reclaim if it would not scan anything")
I merged this prematurely - Michal and Johannes still disagree about the
overall design direction and the future remains unclear.
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Revert commit e975de998b ("memcg, vmscan: do not fall into reclaim-all
pass too quickly")
I merged this prematurely - Michal and Johannes still disagree about the
overall design direction and the future remains unclear.
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more patches from Andrew Morton:
"The rest of MM. Plus one misc cleanup"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
mm/Kconfig: add MMU dependency for MIGRATION.
kernel: replace strict_strto*() with kstrto*()
mm, thp: count thp_fault_fallback anytime thp fault fails
thp: consolidate code between handle_mm_fault() and do_huge_pmd_anonymous_page()
thp: do_huge_pmd_anonymous_page() cleanup
thp: move maybe_pmd_mkwrite() out of mk_huge_pmd()
mm: cleanup add_to_page_cache_locked()
thp: account anon transparent huge pages into NR_ANON_PAGES
truncate: drop 'oldsize' truncate_pagecache() parameter
mm: make lru_add_drain_all() selective
memcg: document cgroup dirty/writeback memory statistics
memcg: add per cgroup writeback pages accounting
memcg: check for proper lock held in mem_cgroup_update_page_stat
memcg: remove MEMCG_NR_FILE_MAPPED
memcg: reduce function dereference
memcg: avoid overflow caused by PAGE_ALIGN
memcg: rename RESOURCE_MAX to RES_COUNTER_MAX
memcg: correct RESOURCE_MAX to ULLONG_MAX
mm: memcg: do not trap chargers with full callstack on OOM
mm: memcg: rework and document OOM waiting and wakeup
...
Clean up some mess made by the "Soft limit rework" series, and a few other
things.
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_zone starts with soft reclaim pass first and then falls back to
regular reclaim if nothing has been scanned. This behavior is natural
but there is a catch. Memcg iterators, when used with the reclaim
cookie, are designed to help to prevent from over reclaim by
interleaving reclaimers (per node-zone-priority) so the tree walk might
miss many (even all) nodes in the hierarchy e.g. when there are direct
reclaimers racing with each other or with kswapd in the global case or
multiple allocators reaching the limit for the target reclaim case. To
make it even more complicated, targeted reclaim doesn't do the whole
tree walk because it stops reclaiming once it reclaims sufficient pages.
As a result groups over the limit might be missed, thus nothing is
scanned, and reclaim would fall back to the reclaim all mode.
This patch checks for the incomplete tree walk in shrink_zone. If no
group has been visited and the hierarchy is soft reclaimable then we
must have missed some groups, in which case the __shrink_zone is called
again. This doesn't guarantee there will be some progress of course
because the current reclaimer might be still racing with others but it
would at least give a chance to start the walk without a big risk of
reclaim latencies.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mem_cgroup_should_soft_reclaim controls whether soft reclaim pass is
done and it always says yes currently. Memcg iterators are clever to
skip nodes that are not soft reclaimable quite efficiently but
mem_cgroup_should_soft_reclaim can be more clever and do not start the
soft reclaim pass at all if it knows that nothing would be scanned
anyway.
In order to do that, simply reuse mem_cgroup_soft_reclaim_eligible for
the target group of the reclaim and allow the pass only if the whole
subtree wouldn't be skipped.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The caller of the iterator might know that some nodes or even subtrees
should be skipped but there is no way to tell iterators about that so the
only choice left is to let iterators to visit each node and do the
selection outside of the iterating code. This, however, doesn't scale
well with hierarchies with many groups where only few groups are
interesting.
This patch adds mem_cgroup_iter_cond variant of the iterator with a
callback which gets called for every visited node. There are three
possible ways how the callback can influence the walk. Either the node is
visited, it is skipped but the tree walk continues down the tree or the
whole subtree of the current group is skipped.
[hughd@google.com: fix memcg-less page reclaim]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@openvz.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Soft reclaim has been done only for the global reclaim (both background
and direct). Since "memcg: integrate soft reclaim tighter with zone
shrinking code" there is no reason for this limitation anymore as the soft
limit reclaim doesn't use any special code paths and it is a part of the
zone shrinking code which is used by both global and targeted reclaims.
From the semantic point of view it is natural to consider soft limit
before touching all groups in the hierarchy tree which is touching the
hard limit because soft limit tells us where to push back when there is a
memory pressure. It is not important whether the pressure comes from the
limit or imbalanced zones.
This patch simply enables soft reclaim unconditionally in
mem_cgroup_should_soft_reclaim so it is enabled for both global and
targeted reclaim paths. mem_cgroup_soft_reclaim_eligible needs to learn
about the root of the reclaim to know where to stop checking soft limit
state of parents up the hierarchy. Say we have
A (over soft limit)
\
B (below s.l., hit the hard limit)
/ \
C D (below s.l.)
B is the source of the outside memory pressure now for D but we shouldn't
soft reclaim it because it is behaving well under B subtree and we can
still reclaim from C (pressumably it is over the limit).
mem_cgroup_soft_reclaim_eligible should therefore stop climbing up the
hierarchy at B (root of the memory pressure).
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset is sitting out of tree for quite some time without any
objections. I would be really happy if it made it into 3.12. I do not
want to push it too hard but I think this work is basically ready and
waiting more doesn't help.
The basic idea is quite simple. Pull soft reclaim into shrink_zone in the
first step and get rid of the previous soft reclaim infrastructure.
shrink_zone is done in two passes now. First it tries to do the soft
limit reclaim and it falls back to reclaim-all mode if no group is over
the limit or no pages have been scanned. The second pass happens at the
same priority so the only time we waste is the memcg tree walk which has
been updated in the third step to have only negligible overhead.
As a bonus we will get rid of a _lot_ of code by this and soft reclaim
will not stand out like before when it wasn't integrated into the zone
shrinking code and it reclaimed at priority 0 (the testing results show
that some workloads suffers from such an aggressive reclaim). The clean
up is in a separate patch because I felt it would be easier to review that
way.
The second step is soft limit reclaim integration into targeted reclaim.
It should be rather straight forward. Soft limit has been used only for
the global reclaim so far but it makes sense for any kind of pressure
coming from up-the-hierarchy, including targeted reclaim.
The third step (patches 4-8) addresses the tree walk overhead by enhancing
memcg iterators to enable skipping whole subtrees and tracking number of
over soft limit children at each level of the hierarchy. This information
is updated same way the old soft limit tree was updated (from
memcg_check_events) so we shouldn't see an additional overhead. In fact
mem_cgroup_update_soft_limit is much simpler than tree manipulation done
previously.
__shrink_zone uses mem_cgroup_soft_reclaim_eligible as a predicate for
mem_cgroup_iter so the decision whether a particular group should be
visited is done at the iterator level which allows us to decide to skip
the whole subtree as well (if there is no child in excess). This reduces
the tree walk overhead considerably.
* TEST 1
========
My primary test case was a parallel kernel build with 2 groups (make is
running with -j8 with a distribution .config in a separate cgroup without
any hard limit) on a 32 CPU machine booted with 1GB memory and both builds
run taskset to Node 0 cpus.
I was mostly interested in 2 setups. Default - no soft limit set and -
and 0 soft limit set to both groups. The first one should tell us whether
the rework regresses the default behavior while the second one should show
us improvements in an extreme case where both workloads are always over
the soft limit.
/usr/bin/time -v has been used to collect the statistics and each
configuration had 3 runs after fresh boot without any other load on the
system.
base is mmotm-2013-07-18-16-40
rework all 8 patches applied on top of base
* No-limit
User
no-limit/base: min: 651.92 max: 672.65 avg: 664.33 std: 8.01 runs: 6
no-limit/rework: min: 657.34 [100.8%] max: 668.39 [99.4%] avg: 663.13 [99.8%] std: 3.61 runs: 6
System
no-limit/base: min: 69.33 max: 71.39 avg: 70.32 std: 0.79 runs: 6
no-limit/rework: min: 69.12 [99.7%] max: 71.05 [99.5%] avg: 70.04 [99.6%] std: 0.59 runs: 6
Elapsed
no-limit/base: min: 398.27 max: 422.36 avg: 408.85 std: 7.74 runs: 6
no-limit/rework: min: 386.36 [97.0%] max: 438.40 [103.8%] avg: 416.34 [101.8%] std: 18.85 runs: 6
The results are within noise. Elapsed time has a bigger variance but the
average looks good.
* 0-limit
User
0-limit/base: min: 573.76 max: 605.63 avg: 585.73 std: 12.21 runs: 6
0-limit/rework: min: 645.77 [112.6%] max: 666.25 [110.0%] avg: 656.97 [112.2%] std: 7.77 runs: 6
System
0-limit/base: min: 69.57 max: 71.13 avg: 70.29 std: 0.54 runs: 6
0-limit/rework: min: 68.68 [98.7%] max: 71.40 [100.4%] avg: 69.91 [99.5%] std: 0.87 runs: 6
Elapsed
0-limit/base: min: 1306.14 max: 1550.17 avg: 1430.35 std: 90.86 runs: 6
0-limit/rework: min: 404.06 [30.9%] max: 465.94 [30.1%] avg: 434.81 [30.4%] std: 22.68 runs: 6
The improvement is really huge here (even bigger than with my previous
testing and I suspect that this highly depends on the storage). Page
fault statistics tell us at least part of the story:
Minor
0-limit/base: min: 37180461.00 max: 37319986.00 avg: 37247470.00 std: 54772.71 runs: 6
0-limit/rework: min: 36751685.00 [98.8%] max: 36805379.00 [98.6%] avg: 36774506.33 [98.7%] std: 17109.03 runs: 6
Major
0-limit/base: min: 170604.00 max: 221141.00 avg: 196081.83 std: 18217.01 runs: 6
0-limit/rework: min: 2864.00 [1.7%] max: 10029.00 [4.5%] avg: 5627.33 [2.9%] std: 2252.71 runs: 6
Same as with my previous testing Minor faults are more or less within
noise but Major fault count is way bellow the base kernel.
While this looks as a nice win it is fair to say that 0-limit
configuration is quite artificial. So I was playing with 0-no-limit
loads as well.
* TEST 2
========
The following results are from 2 groups configuration on a 16GB machine
(single NUMA node).
- A running stream IO (dd if=/dev/zero of=local.file bs=1024) with
2*TotalMem with 0 soft limit.
- B running a mem_eater which consumes TotalMem-1G without any limit. The
mem_eater consumes the memory in 100 chunks with 1s nap after each
mmap+poppulate so that both loads have chance to fight for the memory.
The expected result is that B shouldn't be reclaimed and A shouldn't see
a big dropdown in elapsed time.
User
base: min: 2.68 max: 2.89 avg: 2.76 std: 0.09 runs: 3
rework: min: 3.27 [122.0%] max: 3.74 [129.4%] avg: 3.44 [124.6%] std: 0.21 runs: 3
System
base: min: 86.26 max: 88.29 avg: 87.28 std: 0.83 runs: 3
rework: min: 81.05 [94.0%] max: 84.96 [96.2%] avg: 83.14 [95.3%] std: 1.61 runs: 3
Elapsed
base: min: 317.28 max: 332.39 avg: 325.84 std: 6.33 runs: 3
rework: min: 281.53 [88.7%] max: 298.16 [89.7%] avg: 290.99 [89.3%] std: 6.98 runs: 3
System time improved slightly as well as Elapsed. My previous testing
has shown worse numbers but this again seem to depend on the storage
speed.
My theory is that the writeback doesn't catch up and prio-0 soft reclaim
falls into wait on writeback page too often in the base kernel. The
patched kernel doesn't do that because the soft reclaim is done from the
kswapd/direct reclaim context. This can be seen on the following graph
nicely. The A's group usage_in_bytes regurarly drops really low very often.
All 3 runs
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream.png
resp. a detail of the single run
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/stream-one-run.png
mem_eater seems to be doing better as well. It gets to the full
allocation size faster as can be seen on the following graph:
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/mem_eater-one-run.png
/proc/meminfo collected during the test also shows that rework kernel
hasn't swapped that much (well almost not at all):
base: max: 123900 K avg: 56388.29 K
rework: max: 300 K avg: 128.68 K
kswapd and direct reclaim statistics are of no use unfortunatelly because
soft reclaim is not accounted properly as the counters are hidden by
global_reclaim() checks in the base kernel.
* TEST 3
========
Another test was the same configuration as TEST2 except the stream IO was
replaced by a single kbuild (16 parallel jobs bound to Node0 cpus same as
in TEST1) and mem_eater allocated TotalMem-200M so kbuild had only 200MB
left.
Kbuild did better with the rework kernel here as well:
User
base: min: 860.28 max: 872.86 avg: 868.03 std: 5.54 runs: 3
rework: min: 880.81 [102.4%] max: 887.45 [101.7%] avg: 883.56 [101.8%] std: 2.83 runs: 3
System
base: min: 84.35 max: 85.06 avg: 84.79 std: 0.31 runs: 3
rework: min: 85.62 [101.5%] max: 86.09 [101.2%] avg: 85.79 [101.2%] std: 0.21 runs: 3
Elapsed
base: min: 135.36 max: 243.30 avg: 182.47 std: 45.12 runs: 3
rework: min: 110.46 [81.6%] max: 116.20 [47.8%] avg: 114.15 [62.6%] std: 2.61 runs: 3
Minor
base: min: 36635476.00 max: 36673365.00 avg: 36654812.00 std: 15478.03 runs: 3
rework: min: 36639301.00 [100.0%] max: 36695541.00 [100.1%] avg: 36665511.00 [100.0%] std: 23118.23 runs: 3
Major
base: min: 14708.00 max: 53328.00 avg: 31379.00 std: 16202.24 runs: 3
rework: min: 302.00 [2.1%] max: 414.00 [0.8%] avg: 366.33 [1.2%] std: 47.22 runs: 3
Again we can see a significant improvement in Elapsed (it also seems to
be more stable), there is a huge dropdown for the Major page faults and
much more swapping:
base: max: 583736 K avg: 112547.43 K
rework: max: 4012 K avg: 124.36 K
Graphs from all three runs show the variability of the kbuild quite
nicely. It even seems that it took longer after every run with the base
kernel which would be quite surprising as the source tree for the build is
removed and caches are dropped after each run so the build operates on a
freshly extracted sources everytime.
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater.png
My other testing shows that this is just a matter of timing and other runs
behave differently the std for Elapsed time is similar ~50. Example of
other three runs:
http://labs.suse.cz/mhocko/soft_limit_rework/stream_io-vs-mem_eater/kbuild-mem_eater2.png
So to wrap this up. The series is still doing good and improves the soft
limit.
The testing results for bunch of cgroups with both stream IO and kbuild
loads can be found in "memcg: track children in soft limit excess to
improve soft limit".
This patch:
Memcg soft reclaim has been traditionally triggered from the global
reclaim paths before calling shrink_zone. mem_cgroup_soft_limit_reclaim
then picked up a group which exceeds the soft limit the most and reclaimed
it with 0 priority to reclaim at least SWAP_CLUSTER_MAX pages.
The infrastructure requires per-node-zone trees which hold over-limit
groups and keep them up-to-date (via memcg_check_events) which is not cost
free. Although this overhead hasn't turned out to be a bottle neck the
implementation is suboptimal because mem_cgroup_update_tree has no idea
which zones consumed memory over the limit so we could easily end up
having a group on a node-zone tree having only few pages from that
node-zone.
This patch doesn't try to fix node-zone trees management because it seems
that integrating soft reclaim into zone shrinking sounds much easier and
more appropriate for several reasons. First of all 0 priority reclaim was
a crude hack which might lead to big stalls if the group's LRUs are big
and hard to reclaim (e.g. a lot of dirty/writeback pages). Soft reclaim
should be applicable also to the targeted reclaim which is awkward right
now without additional hacks. Last but not least the whole infrastructure
eats quite some code.
After this patch shrink_zone is done in 2 passes. First it tries to do
the soft reclaim if appropriate (only for global reclaim for now to keep
compatible with the original state) and fall back to ignoring soft limit
if no group is eligible to soft reclaim or nothing has been scanned during
the first pass. Only groups which are over their soft limit or any of
their parents up the hierarchy is over the limit are considered eligible
during the first pass.
Soft limit tree which is not necessary anymore will be removed in the
follow up patch to make this patch smaller and easier to review.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Glauber Costa <glommer@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile 4 from Al Viro:
"list_lru pile, mostly"
This came out of Andrew's pile, Al ended up doing the merge work so that
Andrew didn't have to.
Additionally, a few fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (42 commits)
super: fix for destroy lrus
list_lru: dynamically adjust node arrays
shrinker: Kill old ->shrink API.
shrinker: convert remaining shrinkers to count/scan API
staging/lustre/libcfs: cleanup linux-mem.h
staging/lustre/ptlrpc: convert to new shrinker API
staging/lustre/obdclass: convert lu_object shrinker to count/scan API
staging/lustre/ldlm: convert to shrinkers to count/scan API
hugepage: convert huge zero page shrinker to new shrinker API
i915: bail out earlier when shrinker cannot acquire mutex
drivers: convert shrinkers to new count/scan API
fs: convert fs shrinkers to new scan/count API
xfs: fix dquot isolation hang
xfs-convert-dquot-cache-lru-to-list_lru-fix
xfs: convert dquot cache lru to list_lru
xfs: rework buffer dispose list tracking
xfs-convert-buftarg-lru-to-generic-code-fix
xfs: convert buftarg LRU to generic code
fs: convert inode and dentry shrinking to be node aware
vmscan: per-node deferred work
...
This patch is based on KOSAKI's work and I add a little more description,
please refer https://lkml.org/lkml/2012/6/14/74.
Currently, I found system can enter a state that there are lots of free
pages in a zone but only order-0 and order-1 pages which means the zone is
heavily fragmented, then high order allocation could make direct reclaim
path's long stall(ex, 60 seconds) especially in no swap and no compaciton
enviroment. This problem happened on v3.4, but it seems issue still lives
in current tree, the reason is do_try_to_free_pages enter live lock:
kswapd will go to sleep if the zones have been fully scanned and are still
not balanced. As kswapd thinks there's little point trying all over again
to avoid infinite loop. Instead it changes order from high-order to
0-order because kswapd think order-0 is the most important. Look at
73ce02e9 in detail. If watermarks are ok, kswapd will go back to sleep
and may leave zone->all_unreclaimable =3D 0. It assume high-order users
can still perform direct reclaim if they wish.
Direct reclaim continue to reclaim for a high order which is not a
COSTLY_ORDER without oom-killer until kswapd turn on
zone->all_unreclaimble= . This is because to avoid too early oom-kill.
So it means direct_reclaim depends on kswapd to break this loop.
In worst case, direct-reclaim may continue to page reclaim forever when
kswapd sleeps forever until someone like watchdog detect and finally kill
the process. As described in:
http://thread.gmane.org/gmane.linux.kernel.mm/103737
We can't turn on zone->all_unreclaimable from direct reclaim path because
direct reclaim path don't take any lock and this way is racy. Thus this
patch removes zone->all_unreclaimable field completely and recalculates
zone reclaimable state every time.
Note: we can't take the idea that direct-reclaim see zone->pages_scanned
directly and kswapd continue to use zone->all_unreclaimable. Because, it
is racy. commit 929bea7c71 (vmscan: all_unreclaimable() use
zone->all_unreclaimable as a name) describes the detail.
[akpm@linux-foundation.org: uninline zone_reclaimable_pages() and zone_reclaimable()]
Cc: Aaditya Kumar <aaditya.kumar.30@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Lisa Du <cldu@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The goal of this patch series is to improve performance of munlock() of
large mlocked memory areas on systems without THP. This is motivated by
reported very long times of crash recovery of processes with such areas,
where munlock() can take several seconds. See
http://lwn.net/Articles/548108/
The work was driven by a simple benchmark (to be included in mmtests) that
mmaps() e.g. 56GB with MAP_LOCKED | MAP_POPULATE and measures the time of
munlock(). Profiling was performed by attaching operf --pid to the
process and sending a signal to trigger the munlock() part and then notify
bach the monitoring wrapper to stop operf, so that only munlock() appears
in the profile.
The profiles have shown that CPU time is spent mostly by atomic operations
and repeated locking per single pages. This series aims to reduce both, starting
from simpler to more complex changes.
Patch 1 performs a simple cleanup in putback_lru_page() so that page lru base
type is not determined without being actually needed.
Patch 2 removes an unnecessary call to lru_add_drain() which drains the per-cpu
pagevec after each munlocked page is put there.
Patch 3 changes munlock_vma_range() to use an on-stack pagevec for isolating
multiple non-THP pages under a single lru_lock instead of locking and
processing each page separately.
Patch 4 changes the NR_MLOCK accounting to be called only once per the pvec
introduced by previous patch.
Patch 5 uses the introduced pagevec to batch also the work of putback_lru_page
when possible, bypassing the per-cpu pvec and associated overhead.
Patch 6 removes a redundant get_page/put_page pair which saves costly atomic
operations.
Patch 7 avoids calling follow_page_mask() on each individual page, and obtains
multiple page references under a single page table lock where possible.
Measurements were made using 3.11-rc3 as a baseline. The first set of
measurements shows the possibly ideal conditions where batching should
help the most. All memory is allocated from a single NUMA node and THP is
disabled.
timedmunlock
3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3
0 1 2 3 4 5 6 7
Elapsed min 3.38 ( 0.00%) 3.39 ( -0.13%) 3.00 ( 11.33%) 2.70 ( 20.20%) 2.67 ( 21.11%) 2.37 ( 29.88%) 2.20 ( 34.91%) 1.91 ( 43.59%)
Elapsed mean 3.39 ( 0.00%) 3.40 ( -0.23%) 3.01 ( 11.33%) 2.70 ( 20.26%) 2.67 ( 21.21%) 2.38 ( 29.88%) 2.21 ( 34.93%) 1.92 ( 43.46%)
Elapsed stddev 0.01 ( 0.00%) 0.01 (-43.09%) 0.01 ( 15.42%) 0.01 ( 23.42%) 0.00 ( 89.78%) 0.01 ( -7.15%) 0.00 ( 76.69%) 0.02 (-91.77%)
Elapsed max 3.41 ( 0.00%) 3.43 ( -0.52%) 3.03 ( 11.29%) 2.72 ( 20.16%) 2.67 ( 21.63%) 2.40 ( 29.50%) 2.21 ( 35.21%) 1.96 ( 42.39%)
Elapsed range 0.03 ( 0.00%) 0.04 (-51.16%) 0.02 ( 6.27%) 0.02 ( 14.67%) 0.00 ( 88.90%) 0.03 (-19.18%) 0.01 ( 73.70%) 0.06 (-113.35%
The second set of measurements simulates the worst possible conditions for
batching by using numactl --interleave, so that there is in fact only one
page per pagevec. Even in this case the series seems to improve
performance thanks to reduced atomic operations and removal of
lru_add_drain().
timedmunlock
3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3
0 1 2 3 4 5 6 7
Elapsed min 4.00 ( 0.00%) 4.04 ( -0.93%) 3.87 ( 3.37%) 3.72 ( 6.94%) 3.81 ( 4.72%) 3.69 ( 7.82%) 3.64 ( 8.92%) 3.41 ( 14.81%)
Elapsed mean 4.17 ( 0.00%) 4.15 ( 0.51%) 4.03 ( 3.49%) 3.89 ( 6.84%) 3.86 ( 7.48%) 3.89 ( 6.69%) 3.70 ( 11.27%) 3.48 ( 16.59%)
Elapsed stddev 0.16 ( 0.00%) 0.08 ( 50.76%) 0.10 ( 41.58%) 0.16 ( 4.59%) 0.05 ( 72.38%) 0.19 (-12.91%) 0.05 ( 68.09%) 0.06 ( 66.03%)
Elapsed max 4.34 ( 0.00%) 4.32 ( 0.56%) 4.19 ( 3.62%) 4.12 ( 5.15%) 3.91 ( 9.88%) 4.12 ( 5.25%) 3.80 ( 12.58%) 3.56 ( 18.08%)
Elapsed range 0.34 ( 0.00%) 0.28 ( 17.91%) 0.32 ( 6.45%) 0.40 (-15.73%) 0.10 ( 70.06%) 0.43 (-24.84%) 0.15 ( 55.32%) 0.15 ( 56.16%)
For completeness, a third set of measurements shows the situation where
THP is enabled and allocations are again done on a single NUMA node. Here
munlock() is already very fast thanks to huge pages, and this series does
not compromise that performance. It seems that the removal of call to
lru_add_drain() still helps a bit.
timedmunlock
3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3 3.11-rc3
0 1 2 3 4 5 6 7
Elapsed min 0.01 ( 0.00%) 0.01 ( -0.11%) 0.01 ( 6.59%) 0.01 ( 5.41%) 0.01 ( 5.45%) 0.01 ( 5.03%) 0.01 ( 6.08%) 0.01 ( 5.20%)
Elapsed mean 0.01 ( 0.00%) 0.01 ( -0.27%) 0.01 ( 6.39%) 0.01 ( 5.30%) 0.01 ( 5.32%) 0.01 ( 5.03%) 0.01 ( 5.97%) 0.01 ( 5.22%)
Elapsed stddev 0.00 ( 0.00%) 0.00 ( -9.59%) 0.00 ( 10.77%) 0.00 ( 3.24%) 0.00 ( 24.42%) 0.00 ( 31.86%) 0.00 ( -7.46%) 0.00 ( 6.11%)
Elapsed max 0.01 ( 0.00%) 0.01 ( -0.01%) 0.01 ( 6.83%) 0.01 ( 5.42%) 0.01 ( 5.79%) 0.01 ( 5.53%) 0.01 ( 6.08%) 0.01 ( 5.26%)
Elapsed range 0.00 ( 0.00%) 0.00 ( 7.30%) 0.00 ( 24.38%) 0.00 ( 6.10%) 0.00 ( 30.79%) 0.00 ( 42.52%) 0.00 ( 6.11%) 0.00 ( 10.07%)
This patch (of 7):
In putback_lru_page() since commit c53954a092 (""mm: remove lru parameter
from __lru_cache_add and lru_cache_add_lru") it is no longer needed to
determine lru list via page_lru_base_type().
This patch replaces it with simple flag is_unevictable which says that the
page was put on the inevictable list. This is the only information that
matters in subsequent tests.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The way the page allocator interacts with kswapd creates aging imbalances,
where the amount of time a userspace page gets in memory under reclaim
pressure is dependent on which zone, which node the allocator took the
page frame from.
#1 fixes missed kswapd wakeups on NUMA systems, which lead to some
nodes falling behind for a full reclaim cycle relative to the other
nodes in the system
#3 fixes an interaction where kswapd and a continuous stream of page
allocations keep the preferred zone of a task between the high and
low watermark (allocations succeed + kswapd does not go to sleep)
indefinitely, completely underutilizing the lower zones and
thrashing on the preferred zone
These patches are the aging fairness part of the thrash-detection based
file LRU balancing. Andrea recommended to submit them separately as they
are bugfixes in their own right.
The following test ran a foreground workload (memcachetest) with
background IO of various sizes on a 4 node 8G system (similar results were
observed with single-node 4G systems):
parallelio
BAS FAIRALLO
BASE FAIRALLOC
Ops memcachetest-0M 5170.00 ( 0.00%) 5283.00 ( 2.19%)
Ops memcachetest-791M 4740.00 ( 0.00%) 5293.00 ( 11.67%)
Ops memcachetest-2639M 2551.00 ( 0.00%) 4950.00 ( 94.04%)
Ops memcachetest-4487M 2606.00 ( 0.00%) 3922.00 ( 50.50%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-791M 55.00 ( 0.00%) 18.00 ( 67.27%)
Ops io-duration-2639M 235.00 ( 0.00%) 103.00 ( 56.17%)
Ops io-duration-4487M 278.00 ( 0.00%) 173.00 ( 37.77%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-791M 245184.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-2639M 468069.00 ( 0.00%) 108778.00 ( 76.76%)
Ops swaptotal-4487M 452529.00 ( 0.00%) 76623.00 ( 83.07%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-791M 108297.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-2639M 169537.00 ( 0.00%) 50031.00 ( 70.49%)
Ops swapin-4487M 167435.00 ( 0.00%) 34178.00 ( 79.59%)
Ops minorfaults-0M 1518666.00 ( 0.00%) 1503993.00 ( 0.97%)
Ops minorfaults-791M 1676963.00 ( 0.00%) 1520115.00 ( 9.35%)
Ops minorfaults-2639M 1606035.00 ( 0.00%) 1799717.00 (-12.06%)
Ops minorfaults-4487M 1612118.00 ( 0.00%) 1583825.00 ( 1.76%)
Ops majorfaults-0M 6.00 ( 0.00%) 0.00 ( 0.00%)
Ops majorfaults-791M 13836.00 ( 0.00%) 10.00 ( 99.93%)
Ops majorfaults-2639M 22307.00 ( 0.00%) 6490.00 ( 70.91%)
Ops majorfaults-4487M 21631.00 ( 0.00%) 4380.00 ( 79.75%)
BAS FAIRALLO
BASE FAIRALLOC
User 287.78 460.97
System 2151.67 3142.51
Elapsed 9737.00 8879.34
BAS FAIRALLO
BASE FAIRALLOC
Minor Faults 53721925 57188551
Major Faults 392195 15157
Swap Ins 2994854 112770
Swap Outs 4907092 134982
Direct pages scanned 0 41824
Kswapd pages scanned 32975063 8128269
Kswapd pages reclaimed 6323069 7093495
Direct pages reclaimed 0 41824
Kswapd efficiency 19% 87%
Kswapd velocity 3386.573 915.414
Direct efficiency 100% 100%
Direct velocity 0.000 4.710
Percentage direct scans 0% 0%
Zone normal velocity 2011.338 550.661
Zone dma32 velocity 1365.623 369.221
Zone dma velocity 9.612 0.242
Page writes by reclaim 18732404.000 614807.000
Page writes file 13825312 479825
Page writes anon 4907092 134982
Page reclaim immediate 85490 5647
Sector Reads 12080532 483244
Sector Writes 88740508 65438876
Page rescued immediate 0 0
Slabs scanned 82560 12160
Direct inode steals 0 0
Kswapd inode steals 24401 40013
Kswapd skipped wait 0 0
THP fault alloc 6 8
THP collapse alloc 5481 5812
THP splits 75 22
THP fault fallback 0 0
THP collapse fail 0 0
Compaction stalls 0 54
Compaction success 0 45
Compaction failures 0 9
Page migrate success 881492 82278
Page migrate failure 0 0
Compaction pages isolated 0 60334
Compaction migrate scanned 0 53505
Compaction free scanned 0 1537605
Compaction cost 914 86
NUMA PTE updates 46738231 41988419
NUMA hint faults 31175564 24213387
NUMA hint local faults 10427393 6411593
NUMA pages migrated 881492 55344
AutoNUMA cost 156221 121361
The overall runtime was reduced, throughput for both the foreground
workload as well as the background IO improved, major faults, swapping and
reclaim activity shrunk significantly, reclaim efficiency more than
quadrupled.
This patch:
When the page allocator fails to get a page from all zones in its given
zonelist, it wakes up the per-node kswapds for all zones that are at their
low watermark.
However, with a system under load the free pages in a zone can fluctuate
enough that the allocation fails but the kswapd wakeup is also skipped
while the zone is still really close to the low watermark.
When one node misses a wakeup like this, it won't be aged before all the
other node's zones are down to their low watermarks again. And skipping a
full aging cycle is an obvious fairness problem.
Kswapd runs until the high watermarks are restored, so it should also be
woken when the high watermarks are not met. This ages nodes more equally
and creates a safety margin for the page counter fluctuation.
By using zone_balanced(), it will now check, in addition to the watermark,
if compaction requires more order-0 pages to create a higher order page.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Paul Bolle <paul.bollee@gmail.com>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are no more users of this API, so kill it dead, dead, dead and
quietly bury the corpse in a shallow, unmarked grave in a dark forest deep
in the hills...
[glommer@openvz.org: added flowers to the grave]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Reviewed-by: Greg Thelen <gthelen@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The list_lru infrastructure already keeps per-node LRU lists in its
node-specific list_lru_node arrays and provide us with a per-node API, and
the shrinkers are properly equiped with node information. This means that
we can now focus our shrinking effort in a single node, but the work that
is deferred from one run to another is kept global at nr_in_batch. Work
can be deferred, for instance, during direct reclaim under a GFP_NOFS
allocation, where situation, all the filesystem shrinkers will be
prevented from running and accumulate in nr_in_batch the amount of work
they should have done, but could not.
This creates an impedance problem, where upon node pressure, work deferred
will accumulate and end up being flushed in other nodes. The problem we
describe is particularly harmful in big machines, where many nodes can
accumulate at the same time, all adding to the global counter nr_in_batch.
As we accumulate more and more, we start to ask for the caches to flush
even bigger numbers. The result is that the caches are depleted and do
not stabilize. To achieve stable steady state behavior, we need to tackle
it differently.
In this patch we keep the deferred count per-node, in the new array
nr_deferred[] (the name is also a bit more descriptive) and will never
accumulate that to other nodes.
Signed-off-by: Glauber Costa <glommer@openvz.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pass the node of the current zone being reclaimed to shrink_slab(),
allowing the shrinker control nodemask to be set appropriately for node
aware shrinkers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@openvz.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The current shrinker callout API uses an a single shrinker call for
multiple functions. To determine the function, a special magical value is
passed in a parameter to change the behaviour. This complicates the
implementation and return value specification for the different
behaviours.
Separate the two different behaviours into separate operations, one to
return a count of freeable objects in the cache, and another to scan a
certain number of objects in the cache for freeing. In defining these new
operations, ensure the return values and resultant behaviours are clearly
defined and documented.
Modify shrink_slab() to use the new API and implement the callouts for all
the existing shrinkers.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Glauber Costa <glommer@parallels.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
After the patch "mm: vmscan: Flatten kswapd priority loop" was merged
the scanning priority of kswapd changed.
The priority now rises until it is scanning enough pages to meet the
high watermark. shrink_inactive_list sets ZONE_WRITEBACK if a number of
pages were encountered under writeback but this value is scaled based on
the priority. As kswapd frequently scans with a higher priority now it
is relatively easy to set ZONE_WRITEBACK. This patch removes the
scaling and treates writeback pages similar to how it treats unqueued
dirty pages and congested pages. The user-visible effect should be that
kswapd will writeback fewer pages from reclaim context.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct reclaim is not aborting to allow compaction to go ahead properly.
do_try_to_free_pages is told to abort reclaim which is happily ignores
and instead increases priority instead until it reaches 0 and starts
shrinking file/anon equally. This patch corrects the situation by
aborting reclaim when requested instead of raising priority.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to __pagevec_lru_add, this patch removes the LRU parameter from
__lru_cache_add and lru_cache_add_lru as the caller does not control the
exact LRU the page gets added to. lru_cache_add_lru gets renamed to
lru_cache_add the name is silly without the lru parameter. With the
parameter removed, it is required that the caller indicate if they want
the page added to the active or inactive list by setting or clearing
PageActive respectively.
[akpm@linux-foundation.org: Suggested the patch]
[gang.chen@asianux.com: fix used-unintialized warning]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alexey Lyahkov <alexey.lyashkov@gmail.com>
Cc: Andrew Perepechko <anserper@ya.ru>
Cc: Robin Dong <sanbai@taobao.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Bernd Schubert <bernd.schubert@fastmail.fm>
Cc: David Howells <dhowells@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim keeps track of dirty and under writeback pages and uses it
to determine if wait_iff_congested() should stall or if kswapd should
begin writing back pages. This fails to account for buffer pages that
can be under writeback but not PageWriteback which is the case for
filesystems like ext3 ordered mode. Furthermore, PageDirty buffer pages
can have all the buffers clean and writepage does no IO so it should not
be accounted as congested.
This patch adds an address_space operation that filesystems may
optionally use to check if a page is really dirty or really under
writeback. An implementation is provided for for buffer_heads is added
and used for block operations and ext3 in ordered mode. By default the
page flags are obeyed.
Credit goes to Jan Kara for identifying that the page flags alone are
not sufficient for ext3 and sanity checking a number of ideas on how the
problem could be addressed.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently a zone will only be marked congested if the underlying BDI is
congested but if dirty pages are spread across zones it is possible that
an individual zone is full of dirty pages without being congested. The
impact is that zone gets scanned very quickly potentially reclaiming
really clean pages. This patch treats pages marked for immediate
reclaim as congested for the purposes of marking a zone ZONE_CONGESTED
and stalling in wait_iff_congested.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_inactive_list makes decisions on whether to stall based on the
number of dirty pages encountered. The wait_iff_congested() call in
shrink_page_list does no such thing and it's arbitrary.
This patch moves the decision on whether to set ZONE_CONGESTED and the
wait_iff_congested call into shrink_page_list. This keeps all the
decisions on whether to stall or not in the one place.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In shrink_page_list a decision may be made to stall and flag a zone as
ZONE_WRITEBACK so that if a large number of unqueued dirty pages are
encountered later then the reclaimer will stall. Set ZONE_WRITEBACK
before potentially going to sleep so it is noticed sooner.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit "mm: vmscan: Block kswapd if it is encountering pages under
writeback" blocks page reclaim if it encounters pages under writeback
marked for immediate reclaim. It blocks while pages are still isolated
from the LRU which is unnecessary. This patch defers the blocking until
after the isolated pages have been processed and tidies up some of the
comments.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Further testing of the "Reduce system disruption due to kswapd"
discovered a few problems. First and foremost, it's possible for pages
under writeback to be freed which will lead to badness. Second, as
pages were not being swapped the file LRU was being scanned faster and
clean file pages were being reclaimed. In some cases this results in
increased read IO to re-read data from disk. Third, more pages were
being written from kswapd context which can adversly affect IO
performance. Lastly, it was observed that PageDirty pages are not
necessarily dirty on all filesystems (buffers can be clean while
PageDirty is set and ->writepage generates no IO) and not all
filesystems set PageWriteback when the page is being written (e.g.
ext3). This disconnect confuses the reclaim stalling logic. This
follow-up series is aimed at these problems.
The tests were based on three kernels
vanilla: kernel 3.9 as that is what the current mmotm uses as a baseline
mmotm-20130522 is mmotm as of 22nd May with "Reduce system disruption due to
kswapd" applied on top as per what should be in Andrew's tree
right now
lessdisrupt-v7r10 is this follow-up series on top of the mmotm kernel
The first test used memcached+memcachetest while some background IO was
in progress as implemented by the parallel IO tests implement in MM
Tests. memcachetest benchmarks how many operations/second memcached can
service. It starts with no background IO on a freshly created ext4
filesystem and then re-runs the test with larger amounts of IO in the
background to roughly simulate a large copy in progress. The
expectation is that the IO should have little or no impact on
memcachetest which is running entirely in memory.
parallelio
3.9.0 3.9.0 3.9.0
vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10
Ops memcachetest-0M 23117.00 ( 0.00%) 22780.00 ( -1.46%) 22763.00 ( -1.53%)
Ops memcachetest-715M 23774.00 ( 0.00%) 23299.00 ( -2.00%) 22934.00 ( -3.53%)
Ops memcachetest-2385M 4208.00 ( 0.00%) 24154.00 (474.00%) 23765.00 (464.76%)
Ops memcachetest-4055M 4104.00 ( 0.00%) 25130.00 (512.33%) 24614.00 (499.76%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%) 6.00 ( 50.00%)
Ops io-duration-2385M 116.00 ( 0.00%) 21.00 ( 81.90%) 21.00 ( 81.90%)
Ops io-duration-4055M 160.00 ( 0.00%) 36.00 ( 77.50%) 35.00 ( 78.12%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-715M 140138.00 ( 0.00%) 18.00 ( 99.99%) 18.00 ( 99.99%)
Ops swaptotal-2385M 385682.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-4055M 418029.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-715M 144.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-2385M 134227.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-4055M 125618.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops minorfaults-0M 1536429.00 ( 0.00%) 1531632.00 ( 0.31%) 1533541.00 ( 0.19%)
Ops minorfaults-715M 1786996.00 ( 0.00%) 1612148.00 ( 9.78%) 1608832.00 ( 9.97%)
Ops minorfaults-2385M 1757952.00 ( 0.00%) 1614874.00 ( 8.14%) 1613541.00 ( 8.21%)
Ops minorfaults-4055M 1774460.00 ( 0.00%) 1633400.00 ( 7.95%) 1630881.00 ( 8.09%)
Ops majorfaults-0M 1.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops majorfaults-715M 184.00 ( 0.00%) 167.00 ( 9.24%) 166.00 ( 9.78%)
Ops majorfaults-2385M 24444.00 ( 0.00%) 155.00 ( 99.37%) 93.00 ( 99.62%)
Ops majorfaults-4055M 21357.00 ( 0.00%) 147.00 ( 99.31%) 134.00 ( 99.37%)
memcachetest is the transactions/second reported by memcachetest. In
the vanilla kernel note that performance drops from around
23K/sec to just over 4K/second when there is 2385M of IO going
on in the background. With current mmotm, there is no collapse
in performance and with this follow-up series there is little
change.
swaptotal is the total amount of swap traffic. With mmotm and the follow-up
series, the total amount of swapping is much reduced.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults 11160152 10706748 10622316
Major Faults 46305 755 678
Swap Ins 260249 0 0
Swap Outs 683860 18 18
Direct pages scanned 0 678 2520
Kswapd pages scanned 6046108 8814900 1639279
Kswapd pages reclaimed 1081954 1172267 1094635
Direct pages reclaimed 0 566 2304
Kswapd efficiency 17% 13% 66%
Kswapd velocity 5217.560 7618.953 1414.879
Direct efficiency 100% 83% 91%
Direct velocity 0.000 0.586 2.175
Percentage direct scans 0% 0% 0%
Zone normal velocity 5105.086 6824.681 671.158
Zone dma32 velocity 112.473 794.858 745.896
Zone dma velocity 0.000 0.000 0.000
Page writes by reclaim 1929612.000 6861768.000 32821.000
Page writes file 1245752 6861750 32803
Page writes anon 683860 18 18
Page reclaim immediate 7484 40 239
Sector Reads 1130320 93996 86900
Sector Writes 13508052 10823500 11804436
Page rescued immediate 0 0 0
Slabs scanned 33536 27136 18560
Direct inode steals 0 0 0
Kswapd inode steals 8641 1035 0
Kswapd skipped wait 0 0 0
THP fault alloc 8 37 33
THP collapse alloc 508 552 515
THP splits 24 1 1
THP fault fallback 0 0 0
THP collapse fail 0 0 0
There are a number of observations to make here
1. Swap outs are almost eliminated. Swap ins are 0 indicating that the
pages swapped were really unused anonymous pages. Related to that,
major faults are much reduced.
2. kswapd efficiency was impacted by the initial series but with these
follow-up patches, the efficiency is now at 66% indicating that far
fewer pages were skipped during scanning due to dirty or writeback
pages.
3. kswapd velocity is reduced indicating that fewer pages are being scanned
with the follow-up series as kswapd now stalls when the tail of the
LRU queue is full of unqueued dirty pages. The stall gives flushers a
chance to catch-up so kswapd can reclaim clean pages when it wakes
4. In light of Zlatko's recent reports about zone scanning imbalances,
mmtests now reports scanning velocity on a per-zone basis. With mainline,
you can see that the scanning activity is dominated by the Normal
zone with over 45 times more scanning in Normal than the DMA32 zone.
With the series currently in mmotm, the ratio is slightly better but it
is still the case that the bulk of scanning is in the highest zone. With
this follow-up series, the ratio of scanning between the Normal and
DMA32 zone is roughly equal.
5. As Dave Chinner observed, the current patches in mmotm increased the
number of pages written from kswapd context which is expected to adversly
impact IO performance. With the follow-up patches, far fewer pages are
written from kswapd context than the mainline kernel
6. With the series in mmotm, fewer inodes were reclaimed by kswapd. With
the follow-up series, there is less slab shrinking activity and no inodes
were reclaimed.
7. Note that "Sectors Read" is drastically reduced implying that the source
data being used for the IO is not being aggressively discarded due to
page reclaim skipping over dirty pages and reclaiming clean pages. Note
that the reducion in reads could also be due to inode data not being
re-read from disk after a slab shrink.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz 166.99 32.09 33.44
Mean sda-await 853.64 192.76 185.43
Mean sda-r_await 6.31 9.24 5.97
Mean sda-w_await 2992.81 202.65 192.43
Max sda-avgqz 1409.91 718.75 698.98
Max sda-await 6665.74 3538.00 3124.23
Max sda-r_await 58.96 111.95 58.00
Max sda-w_await 28458.94 3977.29 3148.61
In light of the changes in writes from reclaim context, the number of
reads and Dave Chinner's concerns about IO performance I took a closer
look at the IO stats for the test disk. Few observations
1. The average queue size is reduced by the initial series and roughly
the same with this follow up.
2. Average wait times for writes are reduced and as the IO
is completing faster it at least implies that the gain is because
flushers are writing the files efficiently instead of page reclaim
getting in the way.
3. The reduction in maximum write latency is staggering. 28 seconds down
to 3 seconds.
Jan Kara asked how NFS is affected by all of this. Unstable pages can
be taken into account as one of the patches in the series shows but it
is still the case that filesystems with unusual handling of dirty or
writeback could still be treated better.
Tests like postmark, fsmark and largedd showed up nothing useful. On my test
setup, pages are simply not being written back from reclaim context with or
without the patches and there are no changes in performance. My test setup
probably is just not strong enough network-wise to be really interesting.
I ran a longer-lived memcached test with IO going to NFS instead of a local disk
parallelio
3.9.0 3.9.0 3.9.0
vanilla mm1-mmotm-20130522 mm1-lessdisrupt-v7r10
Ops memcachetest-0M 23323.00 ( 0.00%) 23241.00 ( -0.35%) 23321.00 ( -0.01%)
Ops memcachetest-715M 25526.00 ( 0.00%) 24763.00 ( -2.99%) 23242.00 ( -8.95%)
Ops memcachetest-2385M 8814.00 ( 0.00%) 26924.00 (205.47%) 23521.00 (166.86%)
Ops memcachetest-4055M 5835.00 ( 0.00%) 26827.00 (359.76%) 25560.00 (338.05%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-715M 65.00 ( 0.00%) 71.00 ( -9.23%) 11.00 ( 83.08%)
Ops io-duration-2385M 129.00 ( 0.00%) 94.00 ( 27.13%) 53.00 ( 58.91%)
Ops io-duration-4055M 301.00 ( 0.00%) 100.00 ( 66.78%) 108.00 ( 64.12%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-715M 14394.00 ( 0.00%) 949.00 ( 93.41%) 63.00 ( 99.56%)
Ops swaptotal-2385M 401483.00 ( 0.00%) 24437.00 ( 93.91%) 30118.00 ( 92.50%)
Ops swaptotal-4055M 554123.00 ( 0.00%) 35688.00 ( 93.56%) 63082.00 ( 88.62%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-715M 4522.00 ( 0.00%) 560.00 ( 87.62%) 63.00 ( 98.61%)
Ops swapin-2385M 169861.00 ( 0.00%) 5026.00 ( 97.04%) 13917.00 ( 91.81%)
Ops swapin-4055M 192374.00 ( 0.00%) 10056.00 ( 94.77%) 25729.00 ( 86.63%)
Ops minorfaults-0M 1445969.00 ( 0.00%) 1520878.00 ( -5.18%) 1454024.00 ( -0.56%)
Ops minorfaults-715M 1557288.00 ( 0.00%) 1528482.00 ( 1.85%) 1535776.00 ( 1.38%)
Ops minorfaults-2385M 1692896.00 ( 0.00%) 1570523.00 ( 7.23%) 1559622.00 ( 7.87%)
Ops minorfaults-4055M 1654985.00 ( 0.00%) 1581456.00 ( 4.44%) 1596713.00 ( 3.52%)
Ops majorfaults-0M 0.00 ( 0.00%) 1.00 (-99.00%) 0.00 ( 0.00%)
Ops majorfaults-715M 763.00 ( 0.00%) 265.00 ( 65.27%) 75.00 ( 90.17%)
Ops majorfaults-2385M 23861.00 ( 0.00%) 894.00 ( 96.25%) 2189.00 ( 90.83%)
Ops majorfaults-4055M 27210.00 ( 0.00%) 1569.00 ( 94.23%) 4088.00 ( 84.98%)
1. Performance does not collapse due to IO which is good. IO is also completing
faster. Note with mmotm, IO completes in a third of the time and faster again
with this series applied
2. Swapping is reduced, although not eliminated. The figures for the follow-up
look bad but it does vary a bit as the stalling is not perfect for nfs
or filesystems like ext3 with unusual handling of dirty and writeback
pages
3. There are swapins, particularly with larger amounts of IO indicating
that active pages are being reclaimed. However, the number of much
reduced.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Minor Faults 36339175 35025445 35219699
Major Faults 310964 27108 51887
Swap Ins 2176399 173069 333316
Swap Outs 3344050 357228 504824
Direct pages scanned 8972 77283 43242
Kswapd pages scanned 20899983 8939566 14772851
Kswapd pages reclaimed 6193156 5172605 5231026
Direct pages reclaimed 8450 73802 39514
Kswapd efficiency 29% 57% 35%
Kswapd velocity 3929.743 1847.499 3058.840
Direct efficiency 94% 95% 91%
Direct velocity 1.687 15.972 8.954
Percentage direct scans 0% 0% 0%
Zone normal velocity 3721.907 939.103 2185.142
Zone dma32 velocity 209.522 924.368 882.651
Zone dma velocity 0.000 0.000 0.000
Page writes by reclaim 4082185.000 526319.000 537114.000
Page writes file 738135 169091 32290
Page writes anon 3344050 357228 504824
Page reclaim immediate 9524 170 5595843
Sector Reads 8909900 861192 1483680
Sector Writes 13428980 1488744 2076800
Page rescued immediate 0 0 0
Slabs scanned 38016 31744 28672
Direct inode steals 0 0 0
Kswapd inode steals 424 0 0
Kswapd skipped wait 0 0 0
THP fault alloc 14 15 119
THP collapse alloc 1767 1569 1618
THP splits 30 29 25
THP fault fallback 0 0 0
THP collapse fail 8 5 0
Compaction stalls 17 41 100
Compaction success 7 31 95
Compaction failures 10 10 5
Page migrate success 7083 22157 62217
Page migrate failure 0 0 0
Compaction pages isolated 14847 48758 135830
Compaction migrate scanned 18328 48398 138929
Compaction free scanned 2000255 355827 1720269
Compaction cost 7 24 68
I guess the main takeaway again is the much reduced page writes
from reclaim context and reduced reads.
3.9.0 3.9.0 3.9.0
vanillamm1-mmotm-20130522mm1-lessdisrupt-v7r10
Mean sda-avgqz 23.58 0.35 0.44
Mean sda-await 133.47 15.72 15.46
Mean sda-r_await 4.72 4.69 3.95
Mean sda-w_await 507.69 28.40 33.68
Max sda-avgqz 680.60 12.25 23.14
Max sda-await 3958.89 221.83 286.22
Max sda-r_await 63.86 61.23 67.29
Max sda-w_await 11710.38 883.57 1767.28
And as before, write wait times are much reduced.
This patch:
The patch "mm: vmscan: Have kswapd writeback pages based on dirty pages
encountered, not priority" decides whether to writeback pages from reclaim
context based on the number of dirty pages encountered. This situation is
flagged too easily and flushers are not given the chance to catch up
resulting in more pages being written from reclaim context and potentially
impacting IO performance. The check for PageWriteback is also misplaced
as it happens within a PageDirty check which is nonsense as the dirty may
have been cleared for IO. The accounting is updated very late and pages
that are already under writeback, were reactivated, could not unmapped or
could not be released are all missed. Similarly, a page is considered
congested for reasons other than being congested and pages that cannot be
written out in the correct context are skipped. Finally, it considers
stalling and writing back filesystem pages due to encountering dirty
anonymous pages at the tail of the LRU which is dumb.
This patch causes kswapd to begin writing filesystem pages from reclaim
context only if page reclaim found that all filesystem pages at the tail
of the LRU were unqueued dirty pages. Before it starts writing filesystem
pages, it will stall to give flushers a chance to catch up. The decision
on whether wait_iff_congested is also now determined by dirty filesystem
pages only. Congested pages are based on whether the underlying BDI is
congested regardless of the context of the reclaiming process.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
balance_pgdat() is very long and some of the logic can and should be
internal to kswapd_shrink_zone(). Move it so the flow of
balance_pgdat() is marginally easier to follow.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kswapd checks if it should start writepage as it shrinks each
zone without taking into consideration if the zone is balanced or not.
This is not wrong as such but it does not make much sense either. This
patch checks once per pgdat scan if kswapd should be writing pages.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Historically, kswapd used to congestion_wait() at higher priorities if
it was not making forward progress. This made no sense as the failure
to make progress could be completely independent of IO. It was later
replaced by wait_iff_congested() and removed entirely by commit 258401a6
(mm: don't wait on congested zones in balance_pgdat()) as it was
duplicating logic in shrink_inactive_list().
This is problematic. If kswapd encounters many pages under writeback
and it continues to scan until it reaches the high watermark then it
will quickly skip over the pages under writeback and reclaim clean young
pages or push applications out to swap.
The use of wait_iff_congested() is not suited to kswapd as it will only
stall if the underlying BDI is really congested or a direct reclaimer
was unable to write to the underlying BDI. kswapd bypasses the BDI
congestion as it sets PF_SWAPWRITE but even if this was taken into
account then it would cause direct reclaimers to stall on writeback
which is not desirable.
This patch sets a ZONE_WRITEBACK flag if direct reclaim or kswapd is
encountering too many pages under writeback. If this flag is set and
kswapd encounters a PageReclaim page under writeback then it'll assume
that the LRU lists are being recycled too quickly before IO can complete
and block waiting for some IO to complete.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently kswapd queues dirty pages for writeback if scanning at an
elevated priority but the priority kswapd scans at is not related to the
number of unqueued dirty encountered. Since commit "mm: vmscan: Flatten
kswapd priority loop", the priority is related to the size of the LRU
and the zone watermark which is no indication as to whether kswapd
should write pages or not.
This patch tracks if an excessive number of unqueued dirty pages are
being encountered at the end of the LRU. If so, it indicates that dirty
pages are being recycled before flusher threads can clean them and flags
the zone so that kswapd will start writing pages until the zone is
balanced.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim at priority 0 will scan the entire LRU as priority 0 is
considered to be a near OOM condition. Kswapd can reach priority 0
quite easily if it is encountering a large number of pages it cannot
reclaim such as pages under writeback. When this happens, kswapd
reclaims very aggressively even though there may be no real risk of
allocation failure or OOM.
This patch prevents kswapd reaching priority 0 and trying to reclaim the
world. Direct reclaimers will still reach priority 0 in the event of an
OOM situation.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the past, kswapd makes a decision on whether to compact memory after
the pgdat was considered balanced. This more or less worked but it is
late to make such a decision and does not fit well now that kswapd makes
a decision whether to exit the zone scanning loop depending on reclaim
progress.
This patch will compact a pgdat if at least the requested number of
pages were reclaimed from unbalanced zones for a given priority. If any
zone is currently balanced, kswapd will not call compaction as it is
expected the necessary pages are already available.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd stops raising the scanning priority when at least
SWAP_CLUSTER_MAX pages have been reclaimed or the pgdat is considered
balanced. It then rechecks if it needs to restart at DEF_PRIORITY and
whether high-order reclaim needs to be reset. This is not wrong per-se
but it is confusing to follow and forcing kswapd to stay at DEF_PRIORITY
may require several restarts before it has scanned enough pages to meet
the high watermark even at 100% efficiency. This patch irons out the
logic a bit by controlling when priority is raised and removing the
"goto loop_again".
This patch has kswapd raise the scanning priority until it is scanning
enough pages that it could meet the high watermark in one shrink of the
LRU lists if it is able to reclaim at 100% efficiency. It will not
raise the scanning prioirty higher unless it is failing to reclaim any
pages.
To avoid infinite looping for high-order allocation requests kswapd will
not reclaim for high-order allocations when it has reclaimed at least
twice the number of pages as the allocation request.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Simplistically, the anon and file LRU lists are scanned proportionally
depending on the value of vm.swappiness although there are other factors
taken into account by get_scan_count(). The patch "mm: vmscan: Limit
the number of pages kswapd reclaims" limits the number of pages kswapd
reclaims but it breaks this proportional scanning and may evenly shrink
anon/file LRUs regardless of vm.swappiness.
This patch preserves the proportional scanning and reclaim. It does
mean that kswapd will reclaim more than requested but the number of
pages will be related to the high watermark.
[mhocko@suse.cz: Correct proportional reclaim for memcg and simplify]
[kamezawa.hiroyu@jp.fujitsu.com: Recalculate scan based on target]
[hannes@cmpxchg.org: Account for already scanned pages properly]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series does not fix all the current known problems with reclaim but
it addresses one important swapping bug when there is background IO.
Changelog since V3
- Drop the slab shrink changes in light of Glaubers series and
discussions highlighted that there were a number of potential
problems with the patch. (mel)
- Rebased to 3.10-rc1
Changelog since V2
- Preserve ratio properly for proportional scanning (kamezawa)
Changelog since V1
- Rename ZONE_DIRTY to ZONE_TAIL_LRU_DIRTY (andi)
- Reformat comment in shrink_page_list (andi)
- Clarify some comments (dhillf)
- Rework how the proportional scanning is preserved
- Add PageReclaim check before kswapd starts writeback
- Reset sc.nr_reclaimed on every full zone scan
Kswapd and page reclaim behaviour has been screwy in one way or the
other for a long time. Very broadly speaking it worked in the far past
because machines were limited in memory so it did not have that many
pages to scan and it stalled congestion_wait() frequently to prevent it
going completely nuts. In recent times it has behaved very
unsatisfactorily with some of the problems compounded by the removal of
stall logic and the introduction of transparent hugepage support with
high-order reclaims.
There are many variations of bugs that are rooted in this area. One
example is reports of a large copy operations or backup causing the
machine to grind to a halt or applications pushed to swap. Sometimes in
low memory situations a large percentage of memory suddenly gets
reclaimed. In other cases an application starts and kswapd hits 100%
CPU usage for prolonged periods of time and so on. There is now talk of
introducing features like an extra free kbytes tunable to work around
aspects of the problem instead of trying to deal with it. It's
compounded by the problem that it can be very workload and machine
specific.
This series aims at addressing some of the worst of these problems
without attempting to fundmentally alter how page reclaim works.
Patches 1-2 limits the number of pages kswapd reclaims while still obeying
the anon/file proportion of the LRUs it should be scanning.
Patches 3-4 control how and when kswapd raises its scanning priority and
deletes the scanning restart logic which is tricky to follow.
Patch 5 notes that it is too easy for kswapd to reach priority 0 when
scanning and then reclaim the world. Down with that sort of thing.
Patch 6 notes that kswapd starts writeback based on scanning priority which
is not necessarily related to dirty pages. It will have kswapd
writeback pages if a number of unqueued dirty pages have been
recently encountered at the tail of the LRU.
Patch 7 notes that sometimes kswapd should stall waiting on IO to complete
to reduce LRU churn and the likelihood that it'll reclaim young
clean pages or push applications to swap. It will cause kswapd
to block on IO if it detects that pages being reclaimed under
writeback are recycling through the LRU before the IO completes.
Patchies 8-9 are cosmetic but balance_pgdat() is easier to follow after they
are applied.
This was tested using memcached+memcachetest while some background IO
was in progress as implemented by the parallel IO tests implement in MM
Tests.
memcachetest benchmarks how many operations/second memcached can service
and it is run multiple times. It starts with no background IO and then
re-runs the test with larger amounts of IO in the background to roughly
simulate a large copy in progress. The expectation is that the IO
should have little or no impact on memcachetest which is running
entirely in memory.
3.10.0-rc1 3.10.0-rc1
vanilla lessdisrupt-v4
Ops memcachetest-0M 22155.00 ( 0.00%) 22180.00 ( 0.11%)
Ops memcachetest-715M 22720.00 ( 0.00%) 22355.00 ( -1.61%)
Ops memcachetest-2385M 3939.00 ( 0.00%) 23450.00 (495.33%)
Ops memcachetest-4055M 3628.00 ( 0.00%) 24341.00 (570.92%)
Ops io-duration-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops io-duration-715M 12.00 ( 0.00%) 7.00 ( 41.67%)
Ops io-duration-2385M 118.00 ( 0.00%) 21.00 ( 82.20%)
Ops io-duration-4055M 162.00 ( 0.00%) 36.00 ( 77.78%)
Ops swaptotal-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-715M 140134.00 ( 0.00%) 18.00 ( 99.99%)
Ops swaptotal-2385M 392438.00 ( 0.00%) 0.00 ( 0.00%)
Ops swaptotal-4055M 449037.00 ( 0.00%) 27864.00 ( 93.79%)
Ops swapin-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-715M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-2385M 148031.00 ( 0.00%) 0.00 ( 0.00%)
Ops swapin-4055M 135109.00 ( 0.00%) 0.00 ( 0.00%)
Ops minorfaults-0M 1529984.00 ( 0.00%) 1530235.00 ( -0.02%)
Ops minorfaults-715M 1794168.00 ( 0.00%) 1613750.00 ( 10.06%)
Ops minorfaults-2385M 1739813.00 ( 0.00%) 1609396.00 ( 7.50%)
Ops minorfaults-4055M 1754460.00 ( 0.00%) 1614810.00 ( 7.96%)
Ops majorfaults-0M 0.00 ( 0.00%) 0.00 ( 0.00%)
Ops majorfaults-715M 185.00 ( 0.00%) 180.00 ( 2.70%)
Ops majorfaults-2385M 24472.00 ( 0.00%) 101.00 ( 99.59%)
Ops majorfaults-4055M 22302.00 ( 0.00%) 229.00 ( 98.97%)
Note how the vanilla kernels performance collapses when there is enough
IO taking place in the background. This drop in performance is part of
what users complain of when they start backups. Note how the swapin and
major fault figures indicate that processes were being pushed to swap
prematurely. With the series applied, there is no noticable performance
drop and while there is still some swap activity, it's tiny.
20 iterations of this test were run in total and averaged. Every 5
iterations, additional IO was generated in the background using dd to
measure how the workload was impacted. The 0M, 715M, 2385M and 4055M
subblock refer to the amount of IO going on in the background at each
iteration. So memcachetest-2385M is reporting how many
transactions/second memcachetest recorded on average over 5 iterations
while there was 2385M of IO going on in the ground. There are six
blocks of information reported here
memcachetest is the transactions/second reported by memcachetest. In
the vanilla kernel note that performance drops from around
22K/sec to just under 4K/second when there is 2385M of IO going
on in the background. This is one type of performance collapse
users complain about if a large cp or backup starts in the
background
io-duration refers to how long it takes for the background IO to
complete. It's showing that with the patched kernel that the IO
completes faster while not interfering with the memcache
workload
swaptotal is the total amount of swap traffic. With the patched kernel,
the total amount of swapping is much reduced although it is
still not zero.
swapin in this case is an indication as to whether we are swap trashing.
The closer the swapin/swapout ratio is to 1, the worse the
trashing is. Note with the patched kernel that there is no swapin
activity indicating that all the pages swapped were really inactive
unused pages.
minorfaults are just minor faults. An increased number of minor faults
can indicate that page reclaim is unmapping the pages but not
swapping them out before they are faulted back in. With the
patched kernel, there is only a small change in minor faults
majorfaults are just major faults in the target workload and a high
number can indicate that a workload is being prematurely
swapped. With the patched kernel, major faults are much reduced. As
there are no swapin's recorded so it's not being swapped. The likely
explanation is that that libraries or configuration files used by
the workload during startup get paged out by the background IO.
Overall with the series applied, there is no noticable performance drop
due to background IO and while there is still some swap activity, it's
tiny and the lack of swapins imply that the swapped pages were inactive
and unused.
3.10.0-rc1 3.10.0-rc1
vanilla lessdisrupt-v4
Page Ins 1234608 101892
Page Outs 12446272 11810468
Swap Ins 283406 0
Swap Outs 698469 27882
Direct pages scanned 0 136480
Kswapd pages scanned 6266537 5369364
Kswapd pages reclaimed 1088989 930832
Direct pages reclaimed 0 120901
Kswapd efficiency 17% 17%
Kswapd velocity 5398.371 4635.115
Direct efficiency 100% 88%
Direct velocity 0.000 117.817
Percentage direct scans 0% 2%
Page writes by reclaim 1655843 4009929
Page writes file 957374 3982047
Page writes anon 698469 27882
Page reclaim immediate 5245 1745
Page rescued immediate 0 0
Slabs scanned 33664 25216
Direct inode steals 0 0
Kswapd inode steals 19409 778
Kswapd skipped wait 0 0
THP fault alloc 35 30
THP collapse alloc 472 401
THP splits 27 22
THP fault fallback 0 0
THP collapse fail 0 1
Compaction stalls 0 4
Compaction success 0 0
Compaction failures 0 4
Page migrate success 0 0
Page migrate failure 0 0
Compaction pages isolated 0 0
Compaction migrate scanned 0 0
Compaction free scanned 0 0
Compaction cost 0 0
NUMA PTE updates 0 0
NUMA hint faults 0 0
NUMA hint local faults 0 0
NUMA pages migrated 0 0
AutoNUMA cost 0 0
Unfortunately, note that there is a small amount of direct reclaim due to
kswapd no longer reclaiming the world. ftrace indicates that the direct
reclaim stalls are mostly harmless with the vast bulk of the stalls
incurred by dd
23 tclsh-3367
38 memcachetest-13733
49 memcachetest-12443
57 tee-3368
1541 dd-13826
1981 dd-12539
A consequence of the direct reclaim for dd is that the processes for the
IO workload may show a higher system CPU usage. There is also a risk that
kswapd not reclaiming the world may mean that it stays awake balancing
zones, does not stall on the appropriate events and continually scans
pages it cannot reclaim consuming CPU. This will be visible as continued
high CPU usage but in my own tests I only saw a single spike lasting less
than a second and I did not observe any problems related to reclaim while
running the series on my desktop.
This patch:
The number of pages kswapd can reclaim is bound by the number of pages it
scans which is related to the size of the zone and the scanning priority.
In many cases the priority remains low because it's reset every
SWAP_CLUSTER_MAX reclaimed pages but in the event kswapd scans a large
number of pages it cannot reclaim, it will raise the priority and
potentially discard a large percentage of the zone as sc->nr_to_reclaim is
ULONG_MAX. The user-visible effect is a reclaim "spike" where a large
percentage of memory is suddenly freed. It would be bad enough if this
was just unused memory but because of how anon/file pages are balanced it
is possible that applications get pushed to swap unnecessarily.
This patch limits the number of pages kswapd will reclaim to the high
watermark. Reclaim will still overshoot due to it not being a hard limit
as shrink_lruvec() will ignore the sc.nr_to_reclaim at DEF_PRIORITY but it
prevents kswapd reclaiming the world at higher priorities. The number of
pages it reclaims is not adjusted for high-order allocations as kswapd
will reclaim excessively if it is to balance zones for high-order
allocations.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Tested-by: Zlatko Calusic <zcalusic@bitsync.net>
Cc: dormando <dormando@rydia.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In page reclaim, huge page is split. split_huge_page() adds tail pages
to LRU list. Since we are reclaiming a huge page, it's better we
reclaim all subpages of the huge page instead of just the head page.
This patch adds split tail pages to shrink page list so the tail pages
can be reclaimed soon.
Before this patch, run a swap workload:
thp_fault_alloc 3492
thp_fault_fallback 608
thp_collapse_alloc 6
thp_collapse_alloc_failed 0
thp_split 916
With this patch:
thp_fault_alloc 4085
thp_fault_fallback 16
thp_collapse_alloc 90
thp_collapse_alloc_failed 0
thp_split 1272
fallback allocation is reduced a lot.
[akpm@linux-foundation.org: fix CONFIG_SWAP=n build]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With this patch userland applications that want to maintain the
interactivity/memory allocation cost can use the pressure level
notifications. The levels are defined like this:
The "low" level means that the system is reclaiming memory for new
allocations. Monitoring this reclaiming activity might be useful for
maintaining cache level. Upon notification, the program (typically
"Activity Manager") might analyze vmstat and act in advance (i.e.
prematurely shutdown unimportant services).
The "medium" level means that the system is experiencing medium memory
pressure, the system might be making swap, paging out active file
caches, etc. Upon this event applications may decide to further analyze
vmstat/zoneinfo/memcg or internal memory usage statistics and free any
resources that can be easily reconstructed or re-read from a disk.
The "critical" level means that the system is actively thrashing, it is
about to out of memory (OOM) or even the in-kernel OOM killer is on its
way to trigger. Applications should do whatever they can to help the
system. It might be too late to consult with vmstat or any other
statistics, so it's advisable to take an immediate action.
The events are propagated upward until the event is handled, i.e. the
events are not pass-through. Here is what this means: for example you
have three cgroups: A->B->C. Now you set up an event listener on
cgroups A, B and C, and suppose group C experiences some pressure. In
this situation, only group C will receive the notification, i.e. groups
A and B will not receive it. This is done to avoid excessive
"broadcasting" of messages, which disturbs the system and which is
especially bad if we are low on memory or thrashing. So, organize the
cgroups wisely, or propagate the events manually (or, ask us to
implement the pass-through events, explaining why would you need them.)
Performance wise, the memory pressure notifications feature itself is
lightweight and does not require much of bookkeeping, in contrast to the
rest of memcg features. Unfortunately, as of current memcg
implementation, pages accounting is an inseparable part and cannot be
turned off. The good news is that there are some efforts[1] to improve
the situation; plus, implementing the same, fully API-compatible[2]
interface for CONFIG_MEMCG=n case (e.g. embedded) is also a viable
option, so it will not require any changes on the userland side.
[1] http://permalink.gmane.org/gmane.linux.kernel.cgroups/6291
[2] http://lkml.org/lkml/2013/2/21/454
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix CONFIG_CGROPUPS=n warnings]
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Leonid Moiseichuk <leonid.moiseichuk@nokia.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Local variable total_scanned is no longer used.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the error return value in kswapd_run(). The bug was introduced by
commit d5dc0ad928 ("mm/vmscan: fix error number for failed kthread").
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This variable is calculated from nr_free_pagecache_pages so
change its type to unsigned long.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently, Luigi reported there are lots of free swap space when OOM
happens. It's easily reproduced on zram-over-swap, where many instance
of memory hogs are running and laptop_mode is enabled. He said there
was no problem when he disabled laptop_mode. The problem when I
investigate problem is following as.
Assumption for easy explanation: There are no page cache page in system
because they all are already reclaimed.
1. try_to_free_pages disable may_writepage when laptop_mode is enabled.
2. shrink_inactive_list isolates victim pages from inactive anon lru list.
3. shrink_page_list adds them to swapcache via add_to_swap but it doesn't
pageout because sc->may_writepage is 0 so the page is rotated back into
inactive anon lru list. The add_to_swap made the page Dirty by SetPageDirty.
4. 3 couldn't reclaim any pages so do_try_to_free_pages increase priority and
retry reclaim with higher priority.
5. shrink_inactlive_list try to isolate victim pages from inactive anon lru list
but got failed because it try to isolate pages with ISOLATE_CLEAN mode but
inactive anon lru list is full of dirty pages by 3 so it just returns
without any reclaim progress.
6. do_try_to_free_pages doesn't set may_writepage due to zero total_scanned.
Because sc->nr_scanned is increased by shrink_page_list but we don't call
shrink_page_list in 5 due to short of isolated pages.
Above loop is continued until OOM happens.
The problem didn't happen before [1] was merged because old logic's
isolatation in shrink_inactive_list was successful and tried to call
shrink_page_list to pageout them but it still ends up failed to page out
by may_writepage. But important point is that sc->nr_scanned was
increased although we couldn't swap out them so do_try_to_free_pages
could set may_writepages.
Since commit f80c067361 ("mm: zone_reclaim: make isolate_lru_page()
filter-aware") was introduced, it's not a good idea any more to depends
on only the number of scanned pages for setting may_writepage. So this
patch adds new trigger point of setting may_writepage as below
DEF_PRIOIRTY - 2 which is used to show the significant memory pressure
in VM so it's good fit for our purpose which would be better to lose
power saving or clickety rather than OOM killing.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Luigi Semenzato <semenzato@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An inactive file list is considered low when its active counterpart is
bigger, regardless of whether it is a global zone LRU list or a memcg
zone LRU list. The only difference is in how the LRU size is assessed.
get_lru_size() does the right thing for both global and memcg reclaim
situations.
Get rid of inactive_file_is_low_global() and
mem_cgroup_inactive_file_is_low() by using get_lru_size() and compare
the numbers in common code.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
swap_lock is heavily contended when I test swap to 3 fast SSD (even
slightly slower than swap to 2 such SSD). The main contention comes
from swap_info_get(). This patch tries to fix the gap with adding a new
per-partition lock.
Global data like nr_swapfiles, total_swap_pages, least_priority and
swap_list are still protected by swap_lock.
nr_swap_pages is an atomic now, it can be changed without swap_lock. In
theory, it's possible get_swap_page() finds no swap pages but actually
there are free swap pages. But sounds not a big problem.
Accessing partition specific data (like scan_swap_map and so on) is only
protected by swap_info_struct.lock.
Changing swap_info_struct.flags need hold swap_lock and
swap_info_struct.lock, because scan_scan_map() will check it. read the
flags is ok with either the locks hold.
If both swap_lock and swap_info_struct.lock must be hold, we always hold
the former first to avoid deadlock.
swap_entry_free() can change swap_list. To delete that code, we add a
new highest_priority_index. Whenever get_swap_page() is called, we
check it. If it's valid, we use it.
It's a pity get_swap_page() still holds swap_lock(). But in practice,
swap_lock() isn't heavily contended in my test with this patch (or I can
say there are other much more heavier bottlenecks like TLB flush). And
BTW, looks get_swap_page() doesn't really need the lock. We never free
swap_info[] and we check SWAP_WRITEOK flag. The only risk without the
lock is we could swapout to some low priority swap, but we can quickly
recover after several rounds of swap, so sounds not a big deal to me.
But I'd prefer to fix this if it's a real problem.
"swap: make each swap partition have one address_space" improved the
swapout speed from 1.7G/s to 2G/s. This patch further improves the
speed to 2.3G/s, so around 15% improvement. It's a multi-process test,
so TLB flush isn't the biggest bottleneck before the patches.
[arnd@arndb.de: fix it for nommu]
[hughd@google.com: add missing unlock]
[minchan@kernel.org: get rid of lockdep whinge on sys_swapon]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch introduces PF_MEMALLOC_NOIO on process flag('flags' field of
'struct task_struct'), so that the flag can be set by one task to avoid
doing I/O inside memory allocation in the task's context.
The patch trys to solve one deadlock problem caused by block device, and
the problem may happen at least in the below situations:
- during block device runtime resume, if memory allocation with
GFP_KERNEL is called inside runtime resume callback of any one of its
ancestors(or the block device itself), the deadlock may be triggered
inside the memory allocation since it might not complete until the block
device becomes active and the involed page I/O finishes. The situation
is pointed out first by Alan Stern. It is not a good approach to
convert all GFP_KERNEL[1] in the path into GFP_NOIO because several
subsystems may be involved(for example, PCI, USB and SCSI may be
involved for usb mass stoarage device, network devices involved too in
the iSCSI case)
- during block device runtime suspend, because runtime resume need to
wait for completion of concurrent runtime suspend.
- during error handling of usb mass storage deivce, USB bus reset will
be put on the device, so there shouldn't have any memory allocation with
GFP_KERNEL during USB bus reset, otherwise the deadlock similar with
above may be triggered. Unfortunately, any usb device may include one
mass storage interface in theory, so it requires all usb interface
drivers to handle the situation. In fact, most usb drivers don't know
how to handle bus reset on the device and don't provide .pre_set() and
.post_reset() callback at all, so USB core has to unbind and bind driver
for these devices. So it is still not practical to resort to GFP_NOIO
for solving the problem.
Also the introduced solution can be used by block subsystem or block
drivers too, for example, set the PF_MEMALLOC_NOIO flag before doing
actual I/O transfer.
It is not a good idea to convert all these GFP_KERNEL in the affected
path into GFP_NOIO because these functions doing that may be implemented
as library and will be called in many other contexts.
In fact, memalloc_noio_flags() can convert some of current static
GFP_NOIO allocation into GFP_KERNEL back in other non-affected contexts,
at least almost all GFP_NOIO in USB subsystem can be converted into
GFP_KERNEL after applying the approach and make allocation with GFP_NOIO
only happen in runtime resume/bus reset/block I/O transfer contexts
generally.
[1], several GFP_KERNEL allocation examples in runtime resume path
- pci subsystem
acpi_os_allocate
<-acpi_ut_allocate
<-ACPI_ALLOCATE_ZEROED
<-acpi_evaluate_object
<-__acpi_bus_set_power
<-acpi_bus_set_power
<-acpi_pci_set_power_state
<-platform_pci_set_power_state
<-pci_platform_power_transition
<-__pci_complete_power_transition
<-pci_set_power_state
<-pci_restore_standard_config
<-pci_pm_runtime_resume
- usb subsystem
usb_get_status
<-finish_port_resume
<-usb_port_resume
<-generic_resume
<-usb_resume_device
<-usb_resume_both
<-usb_runtime_resume
- some individual usb drivers
usblp, uvc, gspca, most of dvb-usb-v2 media drivers, cpia2, az6007, ....
That is just what I have found. Unfortunately, this allocation can only
be found by human being now, and there should be many not found since
any function in the resume path(call tree) may allocate memory with
GFP_KERNEL.
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Jiri Kosina <jiri.kosina@suse.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Decotigny <david.decotigny@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
From: Zlatko Calusic <zlatko.calusic@iskon.hr>
Commit 92df3a723f ("mm: vmscan: throttle reclaim if encountering too
many dirty pages under writeback") introduced waiting on congested zones
based on a sane algorithm in shrink_inactive_list().
What this means is that there's no more need for throttling and
additional heuristics in balance_pgdat(). So, let's remove it and tidy
up the code.
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now we have zone->managed_pages for "pages managed by the buddy system
in the zone", so replace zone->present_pages with zone->managed_pages if
what the user really wants is number of allocatable pages.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Cc: Chris Clayton <chris2553@googlemail.com>
Cc: "Rafael J . Wysocki" <rjw@sisk.pl>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that balance_pgdat() is slightly tidied up, thanks to more capable
pgdat_balanced(), it's become obvious that pgdat_balanced() is called to
check the status, then break the loop if pgdat is balanced, just to be
immediately called again. The second call is completely unnecessary, of
course.
The patch introduces pgdat_is_balanced boolean, which helps resolve the
above suboptimal behavior, with the added benefit of slightly better
documenting one other place in the function where we jump and skip lots
of code.
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Targeted (hard resp soft) reclaim has traditionally tried to scan one
group with decreasing priority until nr_to_reclaim (SWAP_CLUSTER_MAX
pages) is reclaimed or all priorities are exhausted. The reclaim is
then retried until the limit is met.
This approach, however, doesn't work well with deeper hierarchies where
groups higher in the hierarchy do not have any or only very few pages
(this usually happens if those groups do not have any tasks and they
have only re-parented pages after some of their children is removed).
Those groups are reclaimed with decreasing priority pointlessly as there
is nothing to reclaim from them.
An easiest fix is to break out of the memcg iteration loop in
shrink_zone only if the whole hierarchy has been visited or sufficient
pages have been reclaimed. This is also more natural because the
reclaimer expects that the hierarchy under the given root is reclaimed.
As a result we can simplify the soft limit reclaim which does its own
iteration.
[yinghan@google.com: break out of the hierarchy loop only if nr_reclaimed exceeded nr_to_reclaim]
[akpm@linux-foundation.org: use conventional comparison order]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Ying Han <yinghan@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The restart logic for when reclaim operates back to back with compaction
is currently applied on the lruvec level. But this does not make sense,
because the container of interest for compaction is a zone as a whole,
not the zone pages that are part of a certain memory cgroup.
Negative impact is bounded. For one, the code checks that the lruvec
has enough reclaim candidates, so it does not risk getting stuck on a
condition that can not be fulfilled. And the unfairness of hammering on
one particular memory cgroup to make progress in a zone will be
amortized by the round robin manner in which reclaim goes through the
memory cgroups. Still, this can lead to unnecessary allocation
latencies when the code elects to restart on a hard to reclaim or small
group when there are other, more reclaimable groups in the zone.
Move this logic to the zone level and restart reclaim for all memory
cgroups in a zone when compaction requires more free pages from it.
[akpm@linux-foundation.org: no need for min_t]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Satoru Moriya <satoru.moriya@hds.com>
Cc: Simon Jeons <simon.jeons@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reclaim pressure balance between anon and file pages is calculated
through a tuple of numerators and a shared denominator.
Exceptional cases that want to force-scan anon or file pages configure
the numerators and denominator such that one list is preferred, which is
not necessarily the most obvious way:
fraction[0] = 1;
fraction[1] = 0;
denominator = 1;
goto out;
Make this easier by making the force-scan cases explicit and use the
fractionals only in case they are calculated from reclaim history.
[akpm@linux-foundation.org: avoid using unintialized_var()]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Satoru Moriya <satoru.moriya@hds.com>
Cc: Simon Jeons <simon.jeons@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A swappiness of 0 has a slightly different meaning for global reclaim
(may swap if file cache really low) and memory cgroup reclaim (never
swap, ever).
In addition, global reclaim at highest priority will scan all LRU lists
equal to their size and ignore other balancing heuristics. UNLESS
swappiness forbids swapping, then the lists are balanced based on recent
reclaim effectiveness. UNLESS file cache is running low, then anonymous
pages are force-scanned.
This (total mess of a) behaviour is implicit and not obvious from the
way the code is organized. At least make it apparent in the code flow
and document the conditions. It will be it easier to come up with sane
semantics later.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Satoru Moriya <satoru.moriya@hds.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Simon Jeons <simon.jeons@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In certain cases (kswapd reclaim, memcg target reclaim), a fixed minimum
amount of pages is scanned from the LRU lists on each iteration, to make
progress.
Do not make this minimum bigger than the respective LRU list size,
however, and save some busy work trying to isolate and reclaim pages
that are not there.
Empty LRU lists are quite common with memory cgroups in NUMA
environments because there exists a set of LRU lists for each zone for
each memory cgroup, while the memory of a single cgroup is expected to
stay on just one node. The number of expected empty LRU lists is thus
memcgs * (nodes - 1) * lru types
Each attempt to reclaim from an empty LRU list does expensive size
comparisons between lists, acquires the zone's lru lock etc. Avoid
that.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Satoru Moriya <satoru.moriya@hds.com>
Cc: Simon Jeons <simon.jeons@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit e986850598 ("mm, vmscan: only evict file pages when we have
plenty") makes a point of not going for anonymous memory while there is
still enough inactive cache around.
The check was added only for global reclaim, but it is just as useful to
reduce swapping in memory cgroup reclaim:
200M-memcg-defconfig-j2
vanilla patched
Real time 454.06 ( +0.00%) 453.71 ( -0.08%)
User time 668.57 ( +0.00%) 668.73 ( +0.02%)
System time 128.92 ( +0.00%) 129.53 ( +0.46%)
Swap in 1246.80 ( +0.00%) 814.40 ( -34.65%)
Swap out 1198.90 ( +0.00%) 827.00 ( -30.99%)
Pages allocated 16431288.10 ( +0.00%) 16434035.30 ( +0.02%)
Major faults 681.50 ( +0.00%) 593.70 ( -12.86%)
THP faults 237.20 ( +0.00%) 242.40 ( +2.18%)
THP collapse 241.20 ( +0.00%) 248.50 ( +3.01%)
THP splits 157.30 ( +0.00%) 161.40 ( +2.59%)
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Satoru Moriya <satoru.moriya@hds.com>
Cc: Simon Jeons <simon.jeons@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit from the file.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An unintended consequence of commit 4ae0a48b5e ("mm: modify
pgdat_balanced() so that it also handles order-0") is that
wait_iff_congested() can now be called with NULL 'struct zone *'
producing kernel oops like this:
BUG: unable to handle kernel NULL pointer dereference
IP: [<ffffffff811542d9>] wait_iff_congested+0x59/0x140
This trivial patch fixes it.
Reported-by: Zhouping Liu <zliu@redhat.com>
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Teach pgdat_balanced() about order-0 allocations so that we can simplify
code in a few places in vmstat.c.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On a 4GB RAM machine, where Normal zone is much smaller than DMA32 zone,
the Normal zone gets fragmented in time. This requires relatively more
pressure in balance_pgdat to get the zone above the required watermark.
Unfortunately, the congestion_wait() call in there slows it down for a
completely wrong reason, expecting that there's a lot of
writeback/swapout, even when there's none (much more common). After a
few days, when fragmentation progresses, this flawed logic translates to
a very high CPU iowait times, even though there's no I/O congestion at
all. If THP is enabled, the problem occurs sooner, but I was able to
see it even on !THP kernels, just by giving it a bit more time to occur.
The proper way to deal with this is to not wait, unless there's
congestion. Thanks to Mel Gorman, we already have the function that
perfectly fits the job. The patch was tested on a machine which nicely
revealed the problem after only 1 day of uptime, and it's been working
great.
Signed-off-by: Zlatko Calusic <zlatko.calusic@iskon.hr>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil found that if too_many_isolated() returns true while performing
direct reclaim we can end up waiting for other threads to complete their
direct reclaim. If those threads are allowed to enter the FS or IO to
free memory, but this thread is not, then it is possible that those
threads will be waiting on this thread and so we get a circular deadlock.
some task enters direct reclaim with GFP_KERNEL
=> too_many_isolated() false
=> vmscan and run into dirty pages
=> pageout()
=> take some FS lock
=> fs/block code does GFP_NOIO allocation
=> enter direct reclaim again
=> too_many_isolated() true
=> waiting for others to progress, however the other
tasks may be circular waiting for the FS lock..
The fix is to let !__GFP_IO and !__GFP_FS direct reclaims enjoy higher
priority than normal ones, by lowering the throttle threshold for the
latter.
Allowing ~1/8 isolated pages in normal is large enough. For example, for
a 1GB LRU list, that's ~128MB isolated pages, or 1k blocked tasks (each
isolates 32 4KB pages), or 64 blocked tasks per logical CPU (assuming 16
logical CPUs per NUMA node). So it's not likely some CPU goes idle
waiting (when it could make progress) because of this limit: there are
much more sleeping reclaim tasks than the number of CPU, so the task may
well be blocked by some low level queue/lock anyway.
Now !GFP_IOFS reclaims won't be waiting for GFP_IOFS reclaims to progress.
They will be blocked only when there are too many concurrent !GFP_IOFS
reclaims, however that's very unlikely because the IO-less direct reclaims
is able to progress much more faster, and they won't deadlock each other.
The threshold is raised high enough for them, so that there can be
sufficient parallel progress of !GFP_IOFS reclaims.
[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Torsten Kaiser <just.for.lkml@googlemail.com>
Tested-by: NeilBrown <neilb@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Comment "Why it's doing so" rather than "What it does" as proposed by
Andrew Morton.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
N_HIGH_MEMORY stands for the nodes that has normal or high memory.
N_MEMORY stands for the nodes that has any memory.
The code here need to handle with the nodes which have memory, we should
use N_MEMORY instead.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lin Feng <linfeng@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd()->try_to_freeze() is defined to return a boolean, so it's better
to use a bool to hold its return value.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we have more inactive file pages than active file pages, we skip
scanning the active file pages altogether, with the idea that we do not
want to evict the working set when there is plenty of streaming IO in the
cache.
However, the code forgot to also skip scanning anonymous pages in that
situation. That leads to the curious situation of keeping the active file
pages protected from being paged out when there are lots of inactive file
pages, while still scanning and evicting anonymous pages.
This patch fixes that situation, by only evicting file pages when we have
plenty of them and most are inactive.
[akpm@linux-foundation.org: adjust comment layout]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't need custom COMPACTION_BUILD anymore, since we have handy
IS_ENABLED().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit c702418f8a ("mm: vmscan: do not keep kswapd looping forever due
to individual uncompactable zones") removed zone watermark checks from
the compaction code in kswapd but left in the zone congestion clearing,
which now happens unconditionally on higher order reclaim.
This messes up the reclaim throttling logic for zones with
dirty/writeback pages, where zones should only lose their congestion
status when their watermarks have been restored.
Remove the clearing from the zone compaction section entirely. The
preliminary zone check and the reclaim loop in kswapd will clear it if
the zone is considered balanced.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a zone meets its high watermark and is compactable in case of
higher order allocations, it contributes to the percentage of the node's
memory that is considered balanced.
This requirement, that a node be only partially balanced, came about
when kswapd was desparately trying to balance tiny zones when all bigger
zones in the node had plenty of free memory. Arguably, the same should
apply to compaction: if a significant part of the node is balanced
enough to run compaction, do not get hung up on that tiny zone that
might never get in shape.
When the compaction logic in kswapd is reached, we know that at least
25% of the node's memory is balanced properly for compaction (see
zone_balanced and pgdat_balanced). Remove the individual zone checks
that restart the kswapd cycle.
Otherwise, we may observe more endless looping in kswapd where the
compaction code loops back to reclaim because of a single zone and
reclaim does nothing because the node is considered balanced overall.
See for example
https://bugzilla.redhat.com/show_bug.cgi?id=866988
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-and-tested-by: Thorsten Leemhuis <fedora@leemhuis.info>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: John Ellson <john.ellson@comcast.net>
Tested-by: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kswapd does not in all places have the same criteria for a balanced
zone. Zones are only being reclaimed when their high watermark is
breached, but compaction checks loop over the zonelist again when the
zone does not meet the low watermark plus two times the size of the
allocation. This gets kswapd stuck in an endless loop over a small
zone, like the DMA zone, where the high watermark is smaller than the
compaction requirement.
Add a function, zone_balanced(), that checks the watermark, and, for
higher order allocations, if compaction has enough free memory. Then
use it uniformly to check for balanced zones.
This makes sure that when the compaction watermark is not met, at least
reclaim happens and progress is made - or the zone is declared
unreclaimable at some point and skipped entirely.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: George Spelvin <linux@horizon.com>
Reported-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reported-by: Tomas Racek <tracek@redhat.com>
Tested-by: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5515061d22 ("mm: throttle direct reclaimers if PF_MEMALLOC
reserves are low and swap is backed by network storage") introduced a
check for fatal signals after a process gets throttled for network
storage. The intention was that if a process was throttled and got
killed that it should not trigger the OOM killer. As pointed out by
Minchan Kim and David Rientjes, this check is in the wrong place and too
broad. If a system is in am OOM situation and a process is exiting, it
can loop in __alloc_pages_slowpath() and calling direct reclaim in a
loop. As the fatal signal is pending it returns 1 as if it is making
forward progress and can effectively deadlock.
This patch moves the fatal_signal_pending() check after throttling to
throttle_direct_reclaim() where it belongs. If the process is killed
while throttled, it will return immediately without direct reclaim
except now it will have TIF_MEMDIE set and will use the PFMEMALLOC
reserves.
Minchan pointed out that it may be better to direct reclaim before
returning to avoid using the reserves because there may be pages that
can easily reclaim that would avoid using the reserves. However, we do
no such targetted reclaim and there is no guarantee that suitable pages
are available. As it is expected that this throttling happens when
swap-over-NFS is used there is a possibility that the process will
instead swap which may allocate network buffers from the PFMEMALLOC
reserves. Hence, in the swap-over-nfs case where a process can be
throtted and be killed it can use the reserves to exit or it can
potentially use reserves to swap a few pages and then exit. This patch
takes the option of using the reserves if necessary to allow the process
exit quickly.
If this patch passes review it should be considered a -stable candidate
for 3.6.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby reported the following:
(It's an effective revert of "mm: vmscan: scale number of pages
reclaimed by reclaim/compaction based on failures".) Given kswapd
had hours of runtime in ps/top output yesterday in the morning
and after the revert it's now 2 minutes in sum for the last 24h,
I would say, it's gone.
The intention of the patch in question was to compensate for the loss of
lumpy reclaim. Part of the reason lumpy reclaim worked is because it
aggressively reclaimed pages and this patch was meant to be a sane
compromise.
When compaction fails, it gets deferred and both compaction and
reclaim/compaction is deferred avoid excessive reclaim. However, since
commit c654345924 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up
each time and continues reclaiming which was not taken into account when
the patch was developed.
Attempts to address the problem ended up just changing the shape of the
problem instead of fixing it. The release window gets closer and while
a THP allocation failing is not a major problem, kswapd chewing up a lot
of CPU is.
This patch reverts commit 83fde0f228 ("mm: vmscan: scale number of
pages reclaimed by reclaim/compaction based on failures") and will be
revisited in the future.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In kswapd(), set current->reclaim_state to NULL before returning, as
current->reclaim_state holds reference to variable on kswapd()'s stack.
In rare cases, while returning from kswapd() during memory offlining,
__free_slab() and freepages() can access the dangling pointer of
current->reclaim_state.
Signed-off-by: Takamori Yamaguchi <takamori.yamaguchi@jp.sony.com>
Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Presently CMA cannot migrate mlocked pages so it ends up failing to allocate
contiguous memory space.
This patch makes mlocked pages be migrated out. Of course, it can affect
realtime processes but in CMA usecase, contiguous memory allocation failing
is far worse than access latency to an mlocked page being variable while
CMA is running. If someone wants to make the system realtime, he shouldn't
enable CMA because stalls can still happen at random times.
[akpm@linux-foundation.org: tweak comment text, per Mel]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_evictable(page, vma) is an irritant: almost all its callers pass
NULL for vma. Remove the vma arg and use mlocked_vma_newpage(vma, page)
explicitly in the couple of places it's needed. But in those places we
don't even need page_evictable() itself! They're dealing with a freshly
allocated anonymous page, which has no "mapping" and cannot be mlocked yet.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compaction caches if a pageblock was scanned and no pages were isolated so
that the pageblocks can be skipped in the future to reduce scanning. This
information is not cleared by the page allocator based on activity due to
the impact it would have to the page allocator fast paths. Hence there is
a requirement that something clear the cache or pageblocks will be skipped
forever. Currently the cache is cleared if there were a number of recent
allocation failures and it has not been cleared within the last 5 seconds.
Time-based decisions like this are terrible as they have no relationship
to VM activity and is basically a big hammer.
Unfortunately, accurate heuristics would add cost to some hot paths so
this patch implements a rough heuristic. There are two cases where the
cache is cleared.
1. If a !kswapd process completes a compaction cycle (migrate and free
scanner meet), the zone is marked compact_blockskip_flush. When kswapd
goes to sleep, it will clear the cache. This is expected to be the
common case where the cache is cleared. It does not really matter if
kswapd happens to be asleep or going to sleep when the flag is set as
it will be woken on the next allocation request.
2. If there have been multiple failures recently and compaction just
finished being deferred then a process will clear the cache and start a
full scan. This situation happens if there are multiple high-order
allocation requests under heavy memory pressure.
The clearing of the PG_migrate_skip bits and other scans is inherently
racy but the race is harmless. For allocations that can fail such as THP,
they will simply fail. For requests that cannot fail, they will retry the
allocation. Tests indicated that scanning rates were roughly similar to
when the time-based heuristic was used and the allocation success rates
were similar.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop clean cache pages instead of migration during alloc_contig_range() to
minimise allocation latency by reducing the amount of migration that is
necessary. It's useful for CMA because latency of migration is more
important than evicting the background process's working set. In
addition, as pages are reclaimed then fewer free pages for migration
targets are required so it avoids memory reclaiming to get free pages,
which is a contributory factor to increased latency.
I measured elapsed time of __alloc_contig_migrate_range() which migrates
10M in 40M movable zone in QEMU machine.
Before - 146ms, After - 7ms
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the return value while failing to create the kswapd kernel thread.
Also, the error message is prioritized as KERN_ERR.
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If allocation fails after compaction then compaction may be deferred for
a number of allocation attempts. If there are subsequent failures,
compact_defer_shift is increased to defer for longer periods. This
patch uses that information to scale the number of pages reclaimed with
compact_defer_shift until allocations succeed again. The rationale is
that reclaiming the normal number of pages still allowed compaction to
fail and its success depends on the number of pages. If it's failing,
reclaim more pages until it succeeds again.
Note that this is not implying that VM reclaim is not reclaiming enough
pages or that its logic is broken. try_to_free_pages() always asks for
SWAP_CLUSTER_MAX pages to be reclaimed regardless of order and that is
what it does. Direct reclaim stops normally with this check.
if (sc->nr_reclaimed >= sc->nr_to_reclaim)
goto out;
should_continue_reclaim delays when that check is made until a minimum
number of pages for reclaim/compaction are reclaimed. It is possible
that this patch could instead set nr_to_reclaim in try_to_free_pages()
and drive it from there but that's behaves differently and not
necessarily for the better. If driven from do_try_to_free_pages(), it
is also possible that priorities will rise.
When they reach DEF_PRIORITY-2, it will also start stalling and setting
pages for immediate reclaim which is more disruptive than not desirable
in this case. That is a more wide-reaching change that could cause
another regression related to THP requests causing interactive jitter.
[akpm@linux-foundation.org: fix build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If kthread_run() fails, pgdat->kswapd contains errno. When we stop this
thread, we only check whether pgdat->kswapd is NULL and access it. If
it contains errno, it will cause page fault. Reset pgdat->kswapd to
NULL when creating kernel thread fails can avoid this problem.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I noticed in a multi-process parallel files reading benchmark I ran on a 8
socket machine, throughput slowed down by a factor of 8 when I ran the
benchmark within a cgroup container. I traced the problem to the
following code path (see below) when we are trying to reclaim memory from
file cache. The res_counter_uncharge function is called on every page
that's reclaimed and created heavy lock contention. The patch below
allows the reclaimed pages to be uncharged from the resource counter in
batch and recovered the regression.
Tim
40.67% usemem [kernel.kallsyms] [k] _raw_spin_lock
|
--- _raw_spin_lock
|
|--92.61%-- res_counter_uncharge
| |
| |--100.00%-- __mem_cgroup_uncharge_common
| | |
| | |--100.00%-- mem_cgroup_uncharge_cache_page
| | | __remove_mapping
| | | shrink_page_list
| | | shrink_inactive_list
| | | shrink_mem_cgroup_zone
| | | shrink_zone
| | | do_try_to_free_pages
| | | try_to_free_pages
| | | __alloc_pages_nodemask
| | | alloc_pages_current
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The may_enter_fs test turns out to be too restrictive: though I saw no
problem with it when testing on 3.5-rc6, it very soon OOMed when I tested
on 3.5-rc6-mm1. I don't know what the difference there is, perhaps I just
slightly changed the way I started off the testing: dd if=/dev/zero
of=/mnt/temp bs=1M count=1024; rm -f /mnt/temp; sync repeatedly, in 20M
memory.limit_in_bytes cgroup to ext4 on USB stick.
ext4 (and gfs2 and xfs) turn out to allocate new pages for writing with
AOP_FLAG_NOFS: that seems a little worrying, and it's unclear to me why
the transaction needs to be started even before allocating pagecache
memory. But it may not be worth worrying about these days: if direct
reclaim avoids FS writeback, does __GFP_FS now mean anything?
Anyway, we insisted on the may_enter_fs test to avoid hangs with the loop
device; but since that also masks off __GFP_IO, we can test for __GFP_IO
directly, ignoring may_enter_fs and __GFP_FS.
But even so, the test still OOMs sometimes: when originally testing on
3.5-rc6, it OOMed about one time in five or ten; when testing just now on
3.5-rc6-mm1, it OOMed on the first iteration.
This residual problem comes from an accumulation of pages under ordinary
writeback, not marked PageReclaim, so rightly not causing the memcg check
to wait on their writeback: these too can prevent shrink_page_list() from
freeing any pages, so many times that memcg reclaim fails and OOMs.
Deal with these in the same way as direct reclaim now deals with dirty FS
pages: mark them PageReclaim. It is appropriate to rotate these to tail
of list when writepage completes, but more importantly, the PageReclaim
flag makes memcg reclaim wait on them if encountered again. Increment
NR_VMSCAN_IMMEDIATE? That's arguable: I chose not.
Setting PageReclaim here may occasionally race with end_page_writeback()
clearing it: lru_deactivate_fn() already faced the same race, and
correctly concluded that the window is small and the issue non-critical.
With these changes, the test runs indefinitely without OOMing on ext4,
ext3 and ext2: I'll move on to test with other filesystems later.
Trivia: invert conditions for a clearer block without an else, and goto
keep_locked to do the unlock_page.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current implementation of dirty pages throttling is not memcg aware
which makes it easy to have memcg LRUs full of dirty pages. Without
throttling, these LRUs can be scanned faster than the rate of writeback,
leading to memcg OOM conditions when the hard limit is small.
This patch fixes the problem by throttling the allocating process
(possibly a writer) during the hard limit reclaim by waiting on
PageReclaim pages. We are waiting only for PageReclaim pages because
those are the pages that made one full round over LRU and that means that
the writeback is much slower than scanning.
The solution is far from being ideal - long term solution is memcg aware
dirty throttling - but it is meant to be a band aid until we have a real
fix. We are seeing this happening during nightly backups which are placed
into containers to prevent from eviction of the real working set.
The change affects only memcg reclaim and only when we encounter
PageReclaim pages which is a signal that the reclaim doesn't catch up on
with the writers so somebody should be throttled. This could be
potentially unfair because it could be somebody else from the group who
gets throttled on behalf of the writer but as writers need to allocate as
well and they allocate in higher rate the probability that only innocent
processes would be penalized is not that high.
I have tested this change by a simple dd copying /dev/zero to tmpfs or
ext3 running under small memcg (1G copy under 5M, 60M, 300M and 2G
containers) and dd got killed by OOM killer every time. With the patch I
could run the dd with the same size under 5M controller without any OOM.
The issue is more visible with slower devices for output.
* With the patch
================
* tmpfs size=2G
---------------
$ vim cgroup_cache_oom_test.sh
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 30.4049 s, 34.5 MB/s
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 31.4561 s, 33.3 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 20.4618 s, 51.2 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 1.42172 s, 738 MB/s
* ext3
------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 27.9547 s, 37.5 MB/s
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 30.3221 s, 34.6 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 24.5764 s, 42.7 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 3.35828 s, 312 MB/s
* Without the patch
===================
* tmpfs size=2G
---------------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
./cgroup_cache_oom_test.sh: line 46: 4668 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 25.4989 s, 41.1 MB/s
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 24.3928 s, 43.0 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 1.49797 s, 700 MB/s
* ext3
------
$ ./cgroup_cache_oom_test.sh 5M
using Limit 5M for group
./cgroup_cache_oom_test.sh: line 46: 4689 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 60M
using Limit 60M for group
./cgroup_cache_oom_test.sh: line 46: 4692 Killed dd if=/dev/zero of=$OUT/zero bs=1M count=$count
$ ./cgroup_cache_oom_test.sh 300M
using Limit 300M for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 20.248 s, 51.8 MB/s
$ ./cgroup_cache_oom_test.sh 2G
using Limit 2G for group
1000+0 records in
1000+0 records out
1048576000 bytes (1.0 GB) copied, 2.85201 s, 368 MB/s
[akpm@linux-foundation.org: tweak changelog, reordered the test to optimize for CONFIG_CGROUP_MEM_RES_CTLR=n]
[hughd@google.com: fix deadlock with loop driver]
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under significant pressure when writing back to network-backed storage,
direct reclaimers may get throttled. This is expected to be a short-lived
event and the processes get woken up again but processes do get stalled.
This patch counts how many times such stalling occurs. It's up to the
administrator whether to reduce these stalls by increasing
min_free_kbytes.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If swap is backed by network storage such as NBD, there is a risk that a
large number of reclaimers can hang the system by consuming all
PF_MEMALLOC reserves. To avoid these hangs, the administrator must tune
min_free_kbytes in advance which is a bit fragile.
This patch throttles direct reclaimers if half the PF_MEMALLOC reserves
are in use. If the system is routinely getting throttled the system
administrator can increase min_free_kbytes so degradation is smoother but
the system will keep running.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Neil Brown <neilb@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial tree from Jiri Kosina:
"Trivial updates all over the place as usual."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (29 commits)
Fix typo in include/linux/clk.h .
pci: hotplug: Fix typo in pci
iommu: Fix typo in iommu
video: Fix typo in drivers/video
Documentation: Add newline at end-of-file to files lacking one
arm,unicore32: Remove obsolete "select MISC_DEVICES"
module.c: spelling s/postition/position/g
cpufreq: Fix typo in cpufreq driver
trivial: typo in comment in mksysmap
mach-omap2: Fix typo in debug message and comment
scsi: aha152x: Fix sparse warning and make printing pointer address more portable.
Change email address for Steve Glendinning
Btrfs: fix typo in convert_extent_bit
via: Remove bogus if check
netprio_cgroup.c: fix comment typo
backlight: fix memory leak on obscure error path
Documentation: asus-laptop.txt references an obsolete Kconfig item
Documentation: ManagementStyle: fixed typo
mm/vmscan: cleanup comment error in balance_pgdat
mm: cleanup on the comments of zone_reclaim_stat
...
Offlining memory may block forever, waiting for kswapd() to wake up
because kswapd() does not check the event kthread->should_stop before
sleeping.
The proper pattern, from Documentation/memory-barriers.txt, is:
--- waker ---
event_indicated = 1;
wake_up_process(event_daemon);
--- sleeper ---
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (event_indicated)
break;
schedule();
}
set_current_state() may be wrapped by:
prepare_to_wait();
In the kswapd() case, event_indicated is kthread->should_stop.
=== offlining memory (waker) ===
kswapd_stop()
kthread_stop()
kthread->should_stop = 1
wake_up_process()
wait_for_completion()
=== kswapd_try_to_sleep (sleeper) ===
kswapd_try_to_sleep()
prepare_to_wait()
.
.
schedule()
.
.
finish_wait()
The schedule() needs to be protected by a test of kthread->should_stop,
which is wrapped by kthread_should_stop().
Reproducer:
Do heavy file I/O in background.
Do a memory offline/online in a tight loop
Signed-off-by: Aaditya Kumar <aaditya.kumar@ap.sony.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
include/linux/mmzone.h
Synced with Linus' tree so that trivial patch can be applied
on top of up-to-date code properly.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Since there are five lists in LRU cache, the array nr in get_scan_count
should be:
nr[0] = anon inactive pages to scan; nr[1] = anon active pages to scan
nr[2] = file inactive pages to scan; nr[3] = file active pages to scan
Signed-off-by: Wanpeng Li <liwp.linux@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Take lruvec further: pass it instead of zone to add_page_to_lru_list() and
del_page_from_lru_list(); and pagevec_lru_move_fn() pass lruvec down to
its target functions.
This cleanup eliminates a swathe of cruft in memcontrol.c, including
mem_cgroup_lru_add_list(), mem_cgroup_lru_del_list() and
mem_cgroup_lru_move_lists() - which never actually touched the lists.
In their place, mem_cgroup_page_lruvec() to decide the lruvec, previously
a side-effect of add, and mem_cgroup_update_lru_size() to maintain the
lru_size stats.
Whilst these are simplifications in their own right, the goal is to bring
the evaluation of lruvec next to the spin_locking of the lrus, in
preparation for a future patch.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Utter trivia in mm/vmscan.c, mostly just reducing the linecount slightly;
most exciting change being get_scan_count() calling vmscan_swappiness()
once instead of twice.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin just introduced mem_cgroup_get_lruvec_size() and
get_lruvec_size(), I'm about to add mem_cgroup_update_lru_size(): but
we're dealing with the same thing, lru_size[lru]. We ought to agree on
the naming, and I do think lru_size is the more correct: so rename his
ones to get_lru_size().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kill struct mem_cgroup_zone and rename shrink_mem_cgroup_zone() to
shrink_lruvec(), it always shrinks one lruvec which it takes as an
argument.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If memory cgroup is enabled we always use lruvecs which are embedded into
struct mem_cgroup_per_zone, so we can reach lru_size counters via
container_of().
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As zone_reclaim_stat is now located in the lruvec, we can reach it
directly.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
update_isolated_counts() is no longer required, because lumpy-reclaim was
removed. Insanity is over, now there is only one kind of inactive page.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It doesn't need a pointer to the cgroup - pointer to the zone is enough.
This patch also kills the "mz" argument of page_check_references() - it is
unused after "mm: memcg: count pte references from every member of the
reclaimed hierarch"
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the mem_cgroup_zone_lruvec() call from isolate_lru_pages() into
shrink_[in]active_list(). Further patches push it to shrink_zone() step
by step.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In memory reclaim some function have too many arguments - "priority" is
one of them. It can be stored in struct scan_control - we construct them
on the same level. Instead of an open coded loop we set the initial
sc.priority, and do_try_to_free_pages() decreases it down to zero.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use vm_swappiness from memory cgroup which is triggered this memory
reclaim. This is more reasonable and allows to kill one argument.
[akpm@linux-foundation.org: fix build (patch skew)]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With mem_cgroup_disabled() now explicit, it becomes clear that the
zone_reclaim_stat structure actually belongs in lruvec, per-zone when
memcg is disabled but per-memcg per-zone when it's enabled.
We can delete mem_cgroup_get_reclaim_stat(), and change
update_page_reclaim_stat() to update just the one set of stats, the one
which get_scan_count() will actually use.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Although one has to admire the skill with which it has been concealed,
scanning_global_lru(mz) is actually just an interesting way to test
mem_cgroup_disabled(). Too many developer hours have been wasted on
confusing it with global_reclaim(): just use mem_cgroup_disabled().
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch kills mem_cgroup_lru_del(), we can use
mem_cgroup_lru_del_list() instead. On 0-order isolation we already have
right lru list id.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After patch "mm: forbid lumpy-reclaim in shrink_active_list()" we can
completely remove anon/file and active/inactive lru type filters from
__isolate_lru_page(), because isolation for 0-order reclaim always
isolates pages from right lru list. And pages-isolation for lumpy
shrink_inactive_list() or memory-compaction anyway allowed to isolate
pages from all evictable lru lists.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's toss lru index through call stack to isolate_lru_pages(), this is
better than its reconstructing from individual bits.
[akpm@linux-foundation.org: fix kerneldoc, per Minchan]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sometimes we'd like to avoid swapping out anonymous memory. In
particular, avoid swapping out pages of important process or process
groups while there is a reasonable amount of pagecache on RAM so that we
can satisfy our customers' requirements.
OTOH, we can control how aggressive the kernel will swap memory pages with
/proc/sys/vm/swappiness for global and
/sys/fs/cgroup/memory/memory.swappiness for each memcg.
But with current reclaim implementation, the kernel may swap out even if
we set swappiness=0 and there is pagecache in RAM.
This patch changes the behavior with swappiness==0. If we set
swappiness==0, the kernel does not swap out completely (for global reclaim
until the amount of free pages and filebacked pages in a zone has been
reduced to something very very small (nr_free + nr_filebacked < high
watermark)).
Signed-off-by: Satoru Moriya <satoru.moriya@hds.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6457474624 ("vmscan: detect mapped file pages used only once")
made mapped pages have another round in inactive list because they might
be just short lived and so we could consider them again next time. This
heuristic helps to reduce pressure on the active list with a streaming
IO worklods.
This patch fixes a regression introduced by this commit for heavy shmem
based workloads because unlike Anon pages, which are excluded from this
heuristic because they are usually long lived, shmem pages are handled
as a regular page cache.
This doesn't work quite well, unfortunately, if the workload is mostly
backed by shmem (in memory database sitting on 80% of memory) with a
streaming IO in the background (backup - up to 20% of memory). Anon
inactive list is full of (dirty) shmem pages when watermarks are hit.
Shmem pages are kept in the inactive list (they are referenced) in the
first round and it is hard to reclaim anything else so we reach lower
scanning priorities very quickly which leads to an excessive swap out.
Let's fix this by excluding all swap backed pages (they tend to be long
lived wrt. the regular page cache anyway) from used-once heuristic and
rather activate them if they are referenced.
The customer's workload is shmem backed database (80% of RAM) and they
are measuring transactions/s with an IO in the background (20%).
Transactions touch more or less random rows in the table. The
transaction rate fell by a factor of 3 (in the worst case) because of
commit 64574746. This patch restores the previous numbers.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@vger.kernel.org> [2.6.34+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew pointed out that the is_mlocked_vma() is misnamed. A function
with name like that would expect bool return and no side-effects.
Since it is called on the fault path for new page, rename it in this
patch.
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtisu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
[akpm@linux-foundation.org: s/mlock_vma_newpage/mlock_vma_newpage/, per Minchan]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The rmap walker checking page table references has historically ignored
references from VMAs that were not part of the memcg that was being
reclaimed during memcg hard limit reclaim.
When transitioning global reclaim to memcg hierarchy reclaim, I missed
that bit and now references from outside a memcg are ignored even during
global reclaim.
Reverting back to traditional behaviour - count all references during
global reclaim and only mind references of the memcg being reclaimed
during limit reclaim would be one option.
However, the more generic idea is to ignore references exactly then when
they are outside the hierarchy that is currently under reclaim; because
only then will their reclamation be of any use to help the pressure
situation. It makes no sense to ignore references from a sibling memcg
and then evict a page that will be immediately refaulted by that sibling
which contributes to the same usage of the common ancestor under
reclaim.
The solution: make the rmap walker ignore references from VMAs that are
not part of the hierarchy that is being reclaimed.
Flat limit reclaim will stay the same, hierarchical limit reclaim will
mind the references only to pages that the hierarchy owns. Global
reclaim, since it reclaims from all memcgs, will be fixed to regard all
references.
[akpm@linux-foundation.org: name the args in the declaration]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Konstantin Khlebnikov<khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is little motiviation for reclaim_mode_t once RECLAIM_MODE_[A]SYNC
and lumpy reclaim have been removed. This patch gets rid of
reclaim_mode_t as well and improves the documentation about what
reclaim/compaction is and when it is triggered.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch stops reclaim/compaction entering sync reclaim as this was
only intended for lumpy reclaim and an oversight. Page migration has
its own logic for stalling on writeback pages if necessary and memory
compaction is already using it.
Waiting on page writeback is bad for a number of reasons but the primary
one is that waiting on writeback to a slow device like USB can take a
considerable length of time. Page reclaim instead uses
wait_iff_congested() to throttle if too many dirty pages are being
scanned.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This series removes lumpy reclaim and some stalling logic that was
unintentionally being used by memory compaction. The end result is that
stalling on dirty pages during page reclaim now depends on
wait_iff_congested().
Four kernels were compared
3.3.0 vanilla
3.4.0-rc2 vanilla
3.4.0-rc2 lumpyremove-v2 is patch one from this series
3.4.0-rc2 nosync-v2r3 is the full series
Removing lumpy reclaim saves almost 900 bytes of text whereas the full
series removes 1200 bytes.
text data bss dec hex filename
6740375 1927944 2260992 10929311 a6c49f vmlinux-3.4.0-rc2-vanilla
6739479 1927944 2260992 10928415 a6c11f vmlinux-3.4.0-rc2-lumpyremove-v2
6739159 1927944 2260992 10928095 a6bfdf vmlinux-3.4.0-rc2-nosync-v2
There are behaviour changes in the series and so tests were run with
monitoring of ftrace events. This disrupts results so the performance
results are distorted but the new behaviour should be clearer.
fs-mark running in a threaded configuration showed little of interest as
it did not push reclaim aggressively
FS-Mark Multi Threaded
3.3.0-vanilla rc2-vanilla lumpyremove-v2r3 nosync-v2r3
Files/s min 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%)
Files/s mean 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%)
Files/s stddev 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%) 0.00 ( 0.00%)
Files/s max 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%) 3.20 ( 0.00%)
Overhead min 508667.00 ( 0.00%) 521350.00 (-2.49%) 544292.00 (-7.00%) 547168.00 (-7.57%)
Overhead mean 551185.00 ( 0.00%) 652690.73 (-18.42%) 991208.40 (-79.83%) 570130.53 (-3.44%)
Overhead stddev 18200.69 ( 0.00%) 331958.29 (-1723.88%) 1579579.43 (-8578.68%) 9576.81 (47.38%)
Overhead max 576775.00 ( 0.00%) 1846634.00 (-220.17%) 6901055.00 (-1096.49%) 585675.00 (-1.54%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 309.90 300.95 307.33 298.95
User+Sys Time Running Test (seconds) 319.32 309.67 315.69 307.51
Total Elapsed Time (seconds) 1187.85 1193.09 1191.98 1193.73
MMTests Statistics: vmstat
Page Ins 80532 82212 81420 79480
Page Outs 111434984 111456240 111437376 111582628
Swap Ins 0 0 0 0
Swap Outs 0 0 0 0
Direct pages scanned 44881 27889 27453 34843
Kswapd pages scanned 25841428 25860774 25861233 25843212
Kswapd pages reclaimed 25841393 25860741 25861199 25843179
Direct pages reclaimed 44881 27889 27453 34843
Kswapd efficiency 99% 99% 99% 99%
Kswapd velocity 21754.791 21675.460 21696.029 21649.127
Direct efficiency 100% 100% 100% 100%
Direct velocity 37.783 23.375 23.031 29.188
Percentage direct scans 0% 0% 0% 0%
ftrace showed that there was no stalling on writeback or pages submitted
for IO from reclaim context.
postmark was similar and while it was more interesting, it also did not
push reclaim heavily.
POSTMARK
3.3.0-vanilla rc2-vanilla lumpyremove-v2r3 nosync-v2r3
Transactions per second: 16.00 ( 0.00%) 20.00 (25.00%) 18.00 (12.50%) 17.00 ( 6.25%)
Data megabytes read per second: 18.80 ( 0.00%) 24.27 (29.10%) 22.26 (18.40%) 20.54 ( 9.26%)
Data megabytes written per second: 35.83 ( 0.00%) 46.25 (29.08%) 42.42 (18.39%) 39.14 ( 9.24%)
Files created alone per second: 28.00 ( 0.00%) 38.00 (35.71%) 34.00 (21.43%) 30.00 ( 7.14%)
Files create/transact per second: 8.00 ( 0.00%) 10.00 (25.00%) 9.00 (12.50%) 8.00 ( 0.00%)
Files deleted alone per second: 556.00 ( 0.00%) 1224.00 (120.14%) 3062.00 (450.72%) 6124.00 (1001.44%)
Files delete/transact per second: 8.00 ( 0.00%) 10.00 (25.00%) 9.00 (12.50%) 8.00 ( 0.00%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 113.34 107.99 109.73 108.72
User+Sys Time Running Test (seconds) 145.51 139.81 143.32 143.55
Total Elapsed Time (seconds) 1159.16 899.23 980.17 1062.27
MMTests Statistics: vmstat
Page Ins 13710192 13729032 13727944 13760136
Page Outs 43071140 42987228 42733684 42931624
Swap Ins 0 0 0 0
Swap Outs 0 0 0 0
Direct pages scanned 0 0 0 0
Kswapd pages scanned 99416139937443 9939085 9929154
Kswapd pages reclaimed 9940926 9936751 9938397 9928465
Direct pages reclaimed 0 0 0 0
Kswapd efficiency 99% 99% 99% 99%
Kswapd velocity 8576.567 11051.058 10140.164 9347.109
Direct efficiency 100% 100% 100% 100%
Direct velocity 0.000 0.000 0.000 0.000
It looks like here that the full series regresses performance but as
ftrace showed no usage of wait_iff_congested() or sync reclaim I am
assuming it's a disruption due to monitoring. Other data such as memory
usage, page IO, swap IO all looked similar.
Running a benchmark with a plain DD showed nothing very interesting.
The full series stalled in wait_iff_congested() slightly less but stall
times on vanilla kernels were marginal.
Running a benchmark that hammered on file-backed mappings showed stalls
due to congestion but not in sync writebacks
MICRO
3.3.0-vanilla rc2-vanilla lumpyremove-v2r3 nosync-v2r3
MMTests Statistics: duration
Sys Time Running Test (seconds) 308.13 294.50 298.75 299.53
User+Sys Time Running Test (seconds) 330.45 316.28 318.93 320.79
Total Elapsed Time (seconds) 1814.90 1833.88 1821.14 1832.91
MMTests Statistics: vmstat
Page Ins 108712 120708 97224 110344
Page Outs 155514576 156017404 155813676 156193256
Swap Ins 0 0 0 0
Swap Outs 0 0 0 0
Direct pages scanned 2599253 1550480 2512822 2414760
Kswapd pages scanned 69742364 71150694 68839041 69692533
Kswapd pages reclaimed 34824488 34773341 34796602 34799396
Direct pages reclaimed 53693 94750 61792 75205
Kswapd efficiency 49% 48% 50% 49%
Kswapd velocity 38427.662 38797.901 37799.972 38022.889
Direct efficiency 2% 6% 2% 3%
Direct velocity 1432.174 845.464 1379.807 1317.446
Percentage direct scans 3% 2% 3% 3%
Page writes by reclaim 0 0 0 0
Page writes file 0 0 0 0
Page writes anon 0 0 0 0
Page reclaim immediate 0 0 0 1218
Page rescued immediate 0 0 0 0
Slabs scanned 15360 16384 13312 16384
Direct inode steals 0 0 0 0
Kswapd inode steals 4340 4327 1630 4323
FTrace Reclaim Statistics: congestion_wait
Direct number congest waited 0 0 0 0
Direct time congest waited 0ms 0ms 0ms 0ms
Direct full congest waited 0 0 0 0
Direct number conditional waited 900 870 754 789
Direct time conditional waited 0ms 0ms 0ms 20ms
Direct full conditional waited 0 0 0 0
KSwapd number congest waited 2106 2308 2116 1915
KSwapd time congest waited 139924ms 157832ms 125652ms 132516ms
KSwapd full congest waited 1346 1530 1202 1278
KSwapd number conditional waited 12922 16320 10943 14670
KSwapd time conditional waited 0ms 0ms 0ms 0ms
KSwapd full conditional waited 0 0 0 0
Reclaim statistics are not radically changed. The stall times in kswapd
are massive but it is clear that it is due to calls to congestion_wait()
and that is almost certainly the call in balance_pgdat(). Otherwise
stalls due to dirty pages are non-existant.
I ran a benchmark that stressed high-order allocation. This is very
artifical load but was used in the past to evaluate lumpy reclaim and
compaction. Generally I look at allocation success rates and latency
figures.
STRESS-HIGHALLOC
3.3.0-vanilla rc2-vanilla lumpyremove-v2r3 nosync-v2r3
Pass 1 81.00 ( 0.00%) 28.00 (-53.00%) 24.00 (-57.00%) 28.00 (-53.00%)
Pass 2 82.00 ( 0.00%) 39.00 (-43.00%) 38.00 (-44.00%) 43.00 (-39.00%)
while Rested 88.00 ( 0.00%) 87.00 (-1.00%) 88.00 ( 0.00%) 88.00 ( 0.00%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 740.93 681.42 685.14 684.87
User+Sys Time Running Test (seconds) 2922.65 3269.52 3281.35 3279.44
Total Elapsed Time (seconds) 1161.73 1152.49 1159.55 1161.44
MMTests Statistics: vmstat
Page Ins 4486020 2807256 2855944 2876244
Page Outs 7261600 7973688 7975320 7986120
Swap Ins 31694 0 0 0
Swap Outs 98179 0 0 0
Direct pages scanned 53494 57731 34406 113015
Kswapd pages scanned 6271173 1287481 1278174 1219095
Kswapd pages reclaimed 2029240 1281025 1260708 1201583
Direct pages reclaimed 1468 14564 16649 92456
Kswapd efficiency 32% 99% 98% 98%
Kswapd velocity 5398.133 1117.130 1102.302 1049.641
Direct efficiency 2% 25% 48% 81%
Direct velocity 46.047 50.092 29.672 97.306
Percentage direct scans 0% 4% 2% 8%
Page writes by reclaim 1616049 0 0 0
Page writes file 1517870 0 0 0
Page writes anon 98179 0 0 0
Page reclaim immediate 103778 27339 9796 17831
Page rescued immediate 0 0 0 0
Slabs scanned 1096704 986112 980992 998400
Direct inode steals 223 215040 216736 247881
Kswapd inode steals 175331 61548 68444 63066
Kswapd skipped wait 21991 0 1 0
THP fault alloc 1 135 125 134
THP collapse alloc 393 311 228 236
THP splits 25 13 7 8
THP fault fallback 0 0 0 0
THP collapse fail 3 5 7 7
Compaction stalls 865 1270 1422 1518
Compaction success 370 401 353 383
Compaction failures 495 869 1069 1135
Compaction pages moved 870155 3828868 4036106 4423626
Compaction move failure 26429 23865 29742 27514
Success rates are completely hosed for 3.4-rc2 which is almost certainly
due to commit fe2c2a1066 ("vmscan: reclaim at order 0 when compaction
is enabled"). I expected this would happen for kswapd and impair
allocation success rates (https://lkml.org/lkml/2012/1/25/166) but I did
not anticipate this much a difference: 80% less scanning, 37% less
reclaim by kswapd
In comparison, reclaim/compaction is not aggressive and gives up easily
which is the intended behaviour. hugetlbfs uses __GFP_REPEAT and would
be much more aggressive about reclaim/compaction than THP allocations
are. The stress test above is allocating like neither THP or hugetlbfs
but is much closer to THP.
Mainline is now impaired in terms of high order allocation under heavy
load although I do not know to what degree as I did not test with
__GFP_REPEAT. Keep this in mind for bugs related to hugepage pool
resizing, THP allocation and high order atomic allocation failures from
network devices.
In terms of congestion throttling, I see the following for this test
FTrace Reclaim Statistics: congestion_wait
Direct number congest waited 3 0 0 0
Direct time congest waited 0ms 0ms 0ms 0ms
Direct full congest waited 0 0 0 0
Direct number conditional waited 957 512 1081 1075
Direct time conditional waited 0ms 0ms 0ms 0ms
Direct full conditional waited 0 0 0 0
KSwapd number congest waited 36 4 3 5
KSwapd time congest waited 3148ms 400ms 300ms 500ms
KSwapd full congest waited 30 4 3 5
KSwapd number conditional waited 88514 197 332 542
KSwapd time conditional waited 4980ms 0ms 0ms 0ms
KSwapd full conditional waited 49 0 0 0
The "conditional waited" times are the most interesting as this is
directly impacted by the number of dirty pages encountered during scan.
As lumpy reclaim is no longer scanning contiguous ranges, it is finding
fewer dirty pages. This brings wait times from about 5 seconds to 0.
kswapd itself is still calling congestion_wait() so it'll still stall but
it's a lot less.
In terms of the type of IO we were doing, I see this
FTrace Reclaim Statistics: mm_vmscan_writepage
Direct writes anon sync 0 0 0 0
Direct writes anon async 0 0 0 0
Direct writes file sync 0 0 0 0
Direct writes file async 0 0 0 0
Direct writes mixed sync 0 0 0 0
Direct writes mixed async 0 0 0 0
KSwapd writes anon sync 0 0 0 0
KSwapd writes anon async 91682 0 0 0
KSwapd writes file sync 0 0 0 0
KSwapd writes file async 822629 0 0 0
KSwapd writes mixed sync 0 0 0 0
KSwapd writes mixed async 0 0 0 0
In 3.2, kswapd was doing a bunch of async writes of pages but
reclaim/compaction was never reaching a point where it was doing sync
IO. This does not guarantee that reclaim/compaction was not calling
wait_on_page_writeback() but I would consider it unlikely. It indicates
that merging patches 2 and 3 to stop reclaim/compaction calling
wait_on_page_writeback() should be safe.
This patch:
Lumpy reclaim had a purpose but in the mind of some, it was to kick the
system so hard it trashed. For others the purpose was to complicate
vmscan.c. Over time it was giving softer shoes and a nicer attitude but
memory compaction needs to step up and replace it so this patch sends
lumpy reclaim to the farm.
The tracepoint format changes for isolating LRU pages with this patch
applied. Furthermore reclaim/compaction can no longer queue dirty pages
in pageout() if the underlying BDI is congested. Lumpy reclaim used
this logic and reclaim/compaction was using it in error.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ying Han <yinghan@google.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The swap token code no longer fits in with the current VM model. It
does not play well with cgroups or the better NUMA placement code in
development, since we have only one swap token globally.
It also has the potential to mess with scalability of the system, by
increasing the number of non-reclaimable pages on the active and
inactive anon LRU lists.
Last but not least, the swap token code has been broken for a year
without complaints, as reported by Konstantin Khlebnikov. This suggests
we no longer have much use for it.
The days of sub-1G memory systems with heavy use of swap are over. If
we ever need thrashing reducing code in the future, we will have to
implement something that does scale.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: Bob Picco <bpicco@meloft.net>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The "pgsteal" stat is confusing because it counts both direct reclaim as
well as background reclaim. However, we have "kswapd_steal" which also
counts background reclaim value.
This patch fixes it and also makes it match the existng "pgscan_" stats.
Test:
pgsteal_kswapd_dma32 447623
pgsteal_kswapd_normal 42272677
pgsteal_kswapd_movable 0
pgsteal_direct_dma32 2801
pgsteal_direct_normal 44353270
pgsteal_direct_movable 0
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c38446cc65.
Before the commit, the code makes senses to me but not after the commit.
The "nr_reclaimed" is the number of pages reclaimed by scanning through
the memcg's lru lists. The "nr_to_reclaim" is the target value for the
whole function. For example, we like to early break the reclaim if
reclaimed 32 pages under direct reclaim (not DEF_PRIORITY).
After the reverted commit, the target "nr_to_reclaim" is decremented each
time by "nr_reclaimed" but we still use it to compare the "nr_reclaimed".
It just doesn't make sense to me...
Signed-off-by: Ying Han <yinghan@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We should only test compaction_suitable if the kernel is built with
CONFIG_COMPACTION, otherwise the stub compaction_suitable function will
always return COMPACT_SKIPPED and send kswapd into an infinite loop.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjusting cc715d99e5 "mm: vmscan: forcibly scan highmem if there are
too many buffer_heads pinning highmem" for -stable reveals that it was
slightly wrong once on top of fe2c2a1066 "vmscan: reclaim at order 0
when compaction is enabled", which specifically adds testorder for the
zone_watermark_ok_safe() test.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reset the reclaim mode in shrink_active_list() to RECLAIM_MODE_SINGLE |
RECLAIM_MODE_ASYNC. (sync/async sign is used only in shrink_page_list
and does not affect shrink_active_list)
Currenly shrink_active_list() sometimes works in lumpy-reclaim mode, if
RECLAIM_MODE_LUMPYRECLAIM is left over from an earlier
shrink_inactive_list(). Meanwhile, in age_active_anon()
sc->reclaim_mode is totally zero. So the current behavior is too
complex and confusing, and this looks like bug.
In general, shrink_active_list() populates the inactive list for the
next shrink_inactive_list(). Lumpy shring_inactive_list() isolates
pages around the chosen one from both the active and inactive lists.
So, there is no reason for lumpy isolation in shrink_active_list().
See also: https://lkml.org/lkml/2012/3/15/583
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Proposed-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c0ff7453bb ("cpuset,mm: fix no node to alloc memory when
changing cpuset's mems") wins a super prize for the largest number of
memory barriers entered into fast paths for one commit.
[get|put]_mems_allowed is incredibly heavy with pairs of full memory
barriers inserted into a number of hot paths. This was detected while
investigating at large page allocator slowdown introduced some time
after 2.6.32. The largest portion of this overhead was shown by
oprofile to be at an mfence introduced by this commit into the page
allocator hot path.
For extra style points, the commit introduced the use of yield() in an
implementation of what looks like a spinning mutex.
This patch replaces the full memory barriers on both read and write
sides with a sequence counter with just read barriers on the fast path
side. This is much cheaper on some architectures, including x86. The
main bulk of the patch is the retry logic if the nodemask changes in a
manner that can cause a false failure.
While updating the nodemask, a check is made to see if a false failure
is a risk. If it is, the sequence number gets bumped and parallel
allocators will briefly stall while the nodemask update takes place.
In a page fault test microbenchmark, oprofile samples from
__alloc_pages_nodemask went from 4.53% of all samples to 1.15%. The
actual results were
3.3.0-rc3 3.3.0-rc3
rc3-vanilla nobarrier-v2r1
Clients 1 UserTime 0.07 ( 0.00%) 0.08 (-14.19%)
Clients 2 UserTime 0.07 ( 0.00%) 0.07 ( 2.72%)
Clients 4 UserTime 0.08 ( 0.00%) 0.07 ( 3.29%)
Clients 1 SysTime 0.70 ( 0.00%) 0.65 ( 6.65%)
Clients 2 SysTime 0.85 ( 0.00%) 0.82 ( 3.65%)
Clients 4 SysTime 1.41 ( 0.00%) 1.41 ( 0.32%)
Clients 1 WallTime 0.77 ( 0.00%) 0.74 ( 4.19%)
Clients 2 WallTime 0.47 ( 0.00%) 0.45 ( 3.73%)
Clients 4 WallTime 0.38 ( 0.00%) 0.37 ( 1.58%)
Clients 1 Flt/sec/cpu 497620.28 ( 0.00%) 520294.53 ( 4.56%)
Clients 2 Flt/sec/cpu 414639.05 ( 0.00%) 429882.01 ( 3.68%)
Clients 4 Flt/sec/cpu 257959.16 ( 0.00%) 258761.48 ( 0.31%)
Clients 1 Flt/sec 495161.39 ( 0.00%) 517292.87 ( 4.47%)
Clients 2 Flt/sec 820325.95 ( 0.00%) 850289.77 ( 3.65%)
Clients 4 Flt/sec 1020068.93 ( 0.00%) 1022674.06 ( 0.26%)
MMTests Statistics: duration
Sys Time Running Test (seconds) 135.68 132.17
User+Sys Time Running Test (seconds) 164.2 160.13
Total Elapsed Time (seconds) 123.46 120.87
The overall improvement is small but the System CPU time is much
improved and roughly in correlation to what oprofile reported (these
performance figures are without profiling so skew is expected). The
actual number of page faults is noticeably improved.
For benchmarks like kernel builds, the overall benefit is marginal but
the system CPU time is slightly reduced.
To test the actual bug the commit fixed I opened two terminals. The
first ran within a cpuset and continually ran a small program that
faulted 100M of anonymous data. In a second window, the nodemask of the
cpuset was continually randomised in a loop.
Without the commit, the program would fail every so often (usually
within 10 seconds) and obviously with the commit everything worked fine.
With this patch applied, it also worked fine so the fix should be
functionally equivalent.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When shrinking inactive lru list, isolated pages are queued on locally
private list, so the lock-hold time could be reduced if pages are counted
without lock protection.
To achieve that, firstly updating reclaim stat is delayed until the
putback stage, after reacquiring the lru lock.
Secondly, operations related to vm and zone stats are now proteced with
preemption disabled as they are per-cpu operations.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stuart Foster reported on bugzilla that copying large amounts of data
from NTFS caused an OOM kill on 32-bit X86 with 16G of memory. Andrew
Morton correctly identified that the problem was NTFS was using 512
blocks meaning each page had 8 buffer_heads in low memory pinning it.
In the past, direct reclaim used to scan highmem even if the allocating
process did not specify __GFP_HIGHMEM but not any more. kswapd no longer
will reclaim from zones that are above the high watermark. The intention
in both cases was to minimise unnecessary reclaim. The downside is on
machines with large amounts of highmem that lowmem can be fully consumed
by buffer_heads with nothing trying to free them.
The following patch is based on a suggestion by Andrew Morton to extend
the buffer_heads_over_limit case to force kswapd and direct reclaim to
scan the highmem zone regardless of the allocation request or watermarks.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42578
[hughd@google.com: move buffer_heads_over_limit check up]
[akpm@linux-foundation.org: buffer_heads_over_limit is unlikely]
Reported-by: Stuart Foster <smf.linux@ntlworld.com>
Tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently a failed order-9 (transparent hugepage) compaction can lead to
memory compaction being temporarily disabled for a memory zone. Even if
we only need compaction for an order 2 allocation, eg. for jumbo frames
networking.
The fix is relatively straightforward: keep track of the highest order at
which compaction is succeeding, and only defer compaction for orders at
which compaction is failing.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With CONFIG_COMPACTION enabled, kswapd does not try to free contiguous
free pages, even when it is woken for a higher order request.
This could be bad for eg. jumbo frame network allocations, which are done
from interrupt context and cannot compact memory themselves. Higher than
before allocation failure rates in the network receive path have been
observed in kernels with compaction enabled.
Teach kswapd to defragment the memory zones in a node, but only if
required and compaction is not deferred in a zone.
[akpm@linux-foundation.org: reduce scope of zones_need_compaction]
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When built with CONFIG_COMPACTION, kswapd should not try to free
contiguous pages, because it is not trying hard enough to have a real
chance at being successful, but still disrupts the LRU enough to break
other things.
Do not do higher order page isolation unless we really are in lumpy
reclaim mode.
Stop reclaiming pages once we have enough free pages that compaction can
deal with things, and we hit the normal order 0 watermarks used by kswapd.
Also remove a line of code that increments balanced right before exiting
the function.
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hillf Danton <dhillf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The value of nr_reclaimed is the number of pages reclaimed in the current
round of the loop, whereas nr_to_reclaim should be compared with the
number of pages reclaimed in all rounds.
In each round of the loop, reclaimed pages are cut off from the reclaim
goal, and the loop stops once the goal achieved.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With tons of reclaim_mode (defined as one field of struct scan_control)
already in the file, it is clearer to rename the local reclaim_mode when
setting up the isolation mode.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit cc39c6a9bb ("mm: account skipped entries to avoid looping in
find_get_pages") correctly fixed an infinite loop; but left a problem
that find_get_pages() on shmem would return 0 (appearing to callers to
mean end of tree) when it meets a run of nr_pages swap entries.
The only uses of find_get_pages() on shmem are via pagevec_lookup(),
called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's
scan_mapping_unevictable_pages(). The first is already commented, and
not worth worrying about; but the second can leave pages on the
Unevictable list after an unusual sequence of swapping and locking.
Fix that by using shmem_find_get_pages_and_swap() (then ignoring the
swap) instead of pagevec_lookup().
But I don't want to contaminate vmscan.c with shmem internals, nor
shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into
shmem.c, renaming it shmem_unlock_mapping(); and rename
check_move_unevictable_page() to check_move_unevictable_pages(), looping
down an array of pages, oftentimes under the same lock.
Leave out the "rotate unevictable list" block: that's a leftover from
when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed
handling involved looking at pages at tail of LRU.
Was there significance to the sequence first ClearPageUnevictable, then
test page_evictable, then SetPageUnevictable here? I think not, we're
under LRU lock, and have no barriers between those.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
scan_mapping_unevictable_pages() is used to make SysV SHM_LOCKed pages
evictable again once the shared memory is unlocked. It does this with
pagevec_lookup()s across the whole object (which might occupy most of
memory), and takes 300ms to unlock 7GB here. A cond_resched() every
PAGEVEC_SIZE pages would be good.
However, KOSAKI-san points out that this is called under shmem.c's
info->lock, and it's also under shm.c's shm_lock(), both spinlocks.
There is no strong reason for that: we need to take these pages off the
unevictable list soonish, but those locks are not required for it.
So move the call to scan_mapping_unevictable_pages() from shmem.c's
unlock handling up to shm.c's unlock handling. Remove the recently
added barrier, not needed now we have spin_unlock() before the scan.
Use get_file(), with subsequent fput(), to make sure we have a reference
to mapping throughout scan_mapping_unevictable_pages(): that's something
that was previously guaranteed by the shm_lock().
Remove shmctl's lru_add_drain_all(): we don't fault in pages at SHM_LOCK
time, and we lazily discover them to be Unevictable later, so it serves
no purpose for SHM_LOCK; and serves no purpose for SHM_UNLOCK, since
pages still on pagevec are not marked Unevictable.
The original code avoided redundant rescans by checking VM_LOCKED flag
at its level: now avoid them by checking shp's SHM_LOCKED.
The original code called scan_mapping_unevictable_pages() on a locked
area at shm_destroy() time: perhaps we once had accounting cross-checks
which required that, but not now, so skip the overhead and just let
inode eviction deal with them.
Put check_move_unevictable_page() and scan_mapping_unevictable_pages()
under CONFIG_SHMEM (with stub for the TINY case when ramfs is used),
more as comment than to save space; comment them used for SHM_UNLOCK.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is sometimes confusion between the global putback_lru_pages() in
migrate.c and the static putback_lru_pages() in vmscan.c: rename the
latter putback_inactive_pages(): it helps shrink_inactive_list() rather as
move_active_pages_to_lru() helps shrink_active_list().
Remove unused scan_control arg from putback_inactive_pages() and from
update_isolated_counts(). Move clear_active_flags() inside
update_isolated_counts(). Move NR_ISOLATED accounting up into
shrink_inactive_list() itself, so the balance is clearer.
Do the spin_lock_irq() before calling putback_inactive_pages() and
spin_unlock_irq() after return from it, so that it better matches
update_isolated_counts() and move_active_pages_to_lru().
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The isolate_pages() level in vmscan.c offers little but indirection: merge
it into isolate_lru_pages() as the compiler does, and use the names
nr_to_scan and nr_scanned in each case.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mostly we use "enum lru_list lru": change those few "l"s to "lru"s.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace pagevecs in putback_lru_pages() and move_active_pages_to_lru()
by lists of pages_to_free: then apply Konstantin Khlebnikov's
free_hot_cold_page_list() to them instead of pagevec_release().
Which simplifies the flow (no need to drop and retake lock whenever
pagevec fills up) and reduces stale addresses in stack backtraces
(which often showed through the pagevecs); but more importantly,
removes another 120 bytes from the deepest stacks in page reclaim.
Although I've not recently seen an actual stack overflow here with
a vanilla kernel, move_active_pages_to_lru() has often featured in
deep backtraces.
However, free_hot_cold_page_list() does not handle compound pages
(nor need it: a Transparent HugePage would have been split by the
time it reaches the call in shrink_page_list()), but it is possible
for putback_lru_pages() or move_active_pages_to_lru() to be left
holding the last reference on a THP, so must exclude the unlikely
compound case before putting on pages_to_free.
Remove pagevec_strip(), its work now done in move_active_pages_to_lru().
The pagevec in scan_mapping_unevictable_pages() remains in mm/vmscan.c,
but that is never on the reclaim path, and cannot be replaced by a list.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If compaction can proceed for a given zone, shrink_zones() does not
reclaim any more pages from it. After commit [e0c2327: vmscan: abort
reclaim/compaction if compaction can proceed], do_try_to_free_pages()
tries to finish as soon as possible once one zone can compact.
This was intended to prevent slabs being shrunk unnecessarily but there
are side-effects. One is that a small zone that is ready for compaction
will abort reclaim even if the chances of successfully allocating a THP
from that zone is small. It also means that reclaim can return too early
even though sc->nr_to_reclaim pages were not reclaimed.
This partially reverts the commit until it is proven that slabs are really
being shrunk unnecessarily but preserves the check to return 1 to avoid
OOM if reclaim was aborted prematurely.
[aarcange@redhat.com: This patch replaces a revert from Andrea]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit e0887c19 ("vmscan: limit direct reclaim for higher order
allocations"), Rik noted that reclaim was too aggressive when THP was
enabled. In his initial patch he used the number of free pages to decide
if reclaim should abort for compaction. My feedback was that reclaim and
compaction should be using the same logic when deciding if reclaim should
be aborted.
Unfortunately, this had the effect of reducing THP success rates when the
workload included something like streaming reads that continually
allocated pages. The window during which compaction could run and return
a THP was too small.
This patch combines Rik's two patches together. compaction_suitable() is
still used to decide if reclaim should be aborted to allow compaction is
used. However, it will also ensure that there is a reasonable buffer of
free pages available. This improves upon the THP allocation success rates
but bounds the number of pages that are freed for compaction.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel<riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 39deaf85 ("mm: compaction: make isolate_lru_page() filter-aware")
noted that compaction does not migrate dirty or writeback pages and that
is was meaningless to pick the page and re-add it to the LRU list. This
had to be partially reverted because some dirty pages can be migrated by
compaction without blocking.
This patch updates "mm: compaction: make isolate_lru_page" by skipping
over pages that migration has no possibility of migrating to minimise LRU
disruption.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel<riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During direct reclaim it is possible that reclaim will be aborted so that
compaction can be attempted to satisfy a high-order allocation. If this
decision is made before any pages are reclaimed, it is possible that 0 is
returned to the page allocator potentially triggering an OOM. This has
not been observed but it is a possibility so this patch addresses it.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Properly take into account if we isolated a compound page during the lumpy
scan in reclaim and skip over the tail pages when encountered. This
corrects the values given to the tracepoint for number of lumpy pages
isolated and will avoid breaking the loop early if compound pages smaller
than the requested allocation size are requested.
[mgorman@suse.de: Updated changelog]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andy Isaacson <adi@hexapodia.org>
Cc: Nai Xia <nai.xia@gmail.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In trace_mm_vmscan_lru_isolate(), we don't output 'file' information to
the trace event and it is a bit inconvenient for the user to get the
real information(like pasted below). mm_vmscan_lru_isolate:
isolate_mode=2 order=0 nr_requested=32 nr_scanned=32 nr_taken=32
contig_taken=0 contig_dirty=0 contig_failed=0
'active' can be obtained by analyzing mode(Thanks go to Minchan and
Mel), So this patch adds 'file' to the trace event and it now looks
like: mm_vmscan_lru_isolate: isolate_mode=2 order=0 nr_requested=32
nr_scanned=32 nr_taken=32 contig_taken=0 contig_dirty=0 contig_failed=0
file=0
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that all code that operated on global per-zone LRU lists is
converted to operate on per-memory cgroup LRU lists instead, there is no
reason to keep the double-LRU scheme around any longer.
The pc->lru member is removed and page->lru is linked directly to the
per-memory cgroup LRU lists, which removes two pointers from a
descriptor that exists for every page frame in the system.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Ying Han <yinghan@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Having a unified structure with a LRU list set for both global zones and
per-memcg zones allows to keep that code simple which deals with LRU
lists and does not care about the container itself.
Once the per-memcg LRU lists directly link struct pages, the isolation
function and all other list manipulations are shared between the memcg
case and the global LRU case.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The global per-zone LRU lists are about to go away on memcg-enabled
kernels, global reclaim must be able to find its pages on the per-memcg
LRU lists.
Since the LRU pages of a zone are distributed over all existing memory
cgroups, a scan target for a zone is complete when all memory cgroups
are scanned for their proportional share of a zone's memory.
The forced scanning of small scan targets from kswapd is limited to
zones marked unreclaimable, otherwise kswapd can quickly overreclaim by
force-scanning the LRU lists of multiple memory cgroups.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory cgroup limit reclaim and traditional global pressure reclaim will
soon share the same code to reclaim from a hierarchical tree of memory
cgroups.
In preparation of this, move the two right next to each other in
shrink_zone().
The mem_cgroup_hierarchical_reclaim() polymath is split into a soft
limit reclaim function, which still does hierarchy walking on its own,
and a limit (shrinking) reclaim function, which relies on generic
reclaim code to walk the hierarchy.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory cgroup hierarchies are currently handled completely outside of
the traditional reclaim code, which is invoked with a single memory
cgroup as an argument for the whole call stack.
Subsequent patches will switch this code to do hierarchical reclaim, so
there needs to be a distinction between a) the memory cgroup that is
triggering reclaim due to hitting its limit and b) the memory cgroup
that is being scanned as a child of a).
This patch introduces a struct mem_cgroup_zone that contains the
combination of the memory cgroup and the zone being scanned, which is
then passed down the stack instead of the zone argument.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The traditional zone reclaim code is scanning the per-zone LRU lists
during direct reclaim and kswapd, and the per-zone per-memory cgroup LRU
lists when reclaiming on behalf of a memory cgroup limit.
Subsequent patches will convert the traditional reclaim code to reclaim
exclusively from the per-memory cgroup LRU lists. As a result, using
the predicate for which LRU list is scanned will no longer be
appropriate to tell global reclaim from limit reclaim.
This patch adds a global_reclaim() predicate to tell direct/kswapd
reclaim from memory cgroup limit reclaim and substitutes it in all
places where currently scanning_global_lru() is used for that.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ying Han <yinghan@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is not the tag page but the cursor page that we should process, and it
looks a typo.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Lumpy reclaim does well to stop at a PageAnon when there's no swap, but
better is to stop at any PageSwapBacked, which includes shmem/tmpfs too.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's pointless to continue reclaiming when we have no swap space and lots
of anon pages in the inactive list.
Without this patch, it is possible when swap is disabled to continue
trying to reclaim when there are only anonymous pages in the system even
though that will not make any progress.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we need to know a usecase, caller program name is critical important.
Show it.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
David Rientjes <rientjes@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Logic added in commit 8cab4754d2 ("vmscan: make mapped executable pages
the first class citizen") was noticeably weakened in commit
6457474624 ("vmscan: detect mapped file pages used only once").
Currently these pages can become "first class citizens" only after second
usage. After this patch page_check_references() will activate they after
first usage, and executable code gets yet better chance to stay in memory.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6457474624 ("vmscan: detect mapped file pages used only once")
greatly decreases lifetime of single-used mapped file pages.
Unfortunately it also decreases life time of all shared mapped file
pages. Because after commit bf3f3bc5e7 ("mm: don't mark_page_accessed
in fault path") page-fault handler does not mark page active or even
referenced.
Thus page_check_references() activates file page only if it was used twice
while it stays in inactive list, meanwhile it activates anon pages after
first access. Inactive list can be small enough, this way reclaimer can
accidentally throw away any widely used page if it wasn't used twice in
short period.
After this patch page_check_references() also activate file mapped page at
first inactive list scan if this page is already used multiple times via
several ptes.
I found this while trying to fix degragation in rhel6 (~2.6.32) from rhel5
(~2.6.18). There a complete mess with >100 web/mail/spam/ftp containers,
they share all their files but there a lot of anonymous pages: ~500mb
shared file mapped memory and 15-20Gb non-shared anonymous memory. In
this situation major-pagefaults are very costly, because all containers
share the same page. In my load kernel created a disproportionate
pressure on the file memory, compared with the anonymous, they equaled
only if I raise swappiness up to 150 =)
These patches actually wasn't helped a lot in my problem, but I saw
noticable (10-20 times) reduce in count and average time of
major-pagefault in file-mapped areas.
Actually both patches are fixes for commit v2.6.33-5448-g6457474, because
it was aimed at one scenario (singly used pages), but it breaks the logic
in other scenarios (shared and/or executable pages)
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.
The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This moves the 'memory sysdev_class' over to a regular 'memory' subsystem
and converts the devices to regular devices. The sysdev drivers are
implemented as subsystem interfaces now.
After all sysdev classes are ported to regular driver core entities, the
sysdev implementation will be entirely removed from the kernel.
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use atomic-long operations instead of looping around cmpxchg().
[akpm@linux-foundation.org: massage atomic.h inclusions]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A shrinker function can return -1, means that it cannot do anything
without a risk of deadlock. For example prune_super() does this if it
cannot grab a superblock refrence, even if nr_to_scan=0. Currently we
interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan'
according to this. So the next time around this shrinker can cause
really big pressure. Let's skip such shrinkers instead.
Also make total_scan signed, otherwise the check (total_scan < 0) below
never works.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'writeback-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: Add a 'reason' to wb_writeback_work
writeback: send work item to queue_io, move_expired_inodes
writeback: trace event balance_dirty_pages
writeback: trace event bdi_dirty_ratelimit
writeback: fix ppc compile warnings on do_div(long long, unsigned long)
writeback: per-bdi background threshold
writeback: dirty position control - bdi reserve area
writeback: control dirty pause time
writeback: limit max dirty pause time
writeback: IO-less balance_dirty_pages()
writeback: per task dirty rate limit
writeback: stabilize bdi->dirty_ratelimit
writeback: dirty rate control
writeback: add bg_threshold parameter to __bdi_update_bandwidth()
writeback: dirty position control
writeback: account per-bdi accumulated dirtied pages
Reclaim decides to skip scanning an active list when the corresponding
inactive list is above a certain size in comparison to leave the assumed
working set alone while there are still enough reclaim candidates around.
The memcg implementation of comparing those lists instead reports whether
the whole memcg is low on the requested type of inactive pages,
considering all nodes and zones.
This can lead to an oversized active list not being scanned because of the
state of the other lists in the memcg, as well as an active list being
scanned while its corresponding inactive list has enough pages.
Not only is this wrong, it's also a scalability hazard, because the global
memory state over all nodes and zones has to be gathered for each memcg
and zone scanned.
Make these calculations purely based on the size of the two LRU lists
that are actually affected by the outcome of the decision.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If compaction can proceed, shrink_zones() stops doing any work but its
callers still call shrink_slab() which raises the priority and potentially
sleeps. This is unnecessary and wasteful so this patch aborts direct
reclaim/compaction entirely if compaction can proceed.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When suffering from memory fragmentation due to unfreeable pages, THP page
faults will repeatedly try to compact memory. Due to the unfreeable
pages, compaction fails.
Needless to say, at that point page reclaim also fails to create free
contiguous 2MB areas. However, that doesn't stop the current code from
trying, over and over again, and freeing a minimum of 4MB (2UL <<
sc->order pages) at every single invocation.
This resulted in my 12GB system having 2-3GB free memory, a corresponding
amount of used swap and very sluggish response times.
This can be avoided by having the direct reclaim code not reclaim from
zones that already have plenty of free memory available for compaction.
If compaction still fails due to unmovable memory, doing additional
reclaim will only hurt the system, not help.
[jweiner@redhat.com: change comment to explain the order check]
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a race between putback_lru_page() and shmem_lock with lock=0 happens,
progrom execution order is as follows, but clear_bit in processor #1 could
be reordered right before spin_unlock of processor #1. Then, the page
would be stranded on the unevictable list.
spin_lock
SetPageLRU
spin_unlock
clear_bit(AS_UNEVICTABLE)
spin_lock
if PageLRU()
if !test_bit(AS_UNEVICTABLE)
move evictable list
smp_mb
if !test_bit(AS_UNEVICTABLE)
move evictable list
spin_unlock
But, pagevec_lookup() in scan_mapping_unevictable_pages() has
rcu_read_[un]lock() so it could protect reordering before reaching
test_bit(AS_UNEVICTABLE) on processor #1 so this problem never happens.
But it's a unexpected side effect and we should solve this problem
properly.
This patch adds a barrier after mapping_clear_unevictable.
I didn't meet this problem but just found during review.
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At one point, anonymous pages were supposed to go on the unevictable list
when no swap space was configured, and the idea was to manually rescue
those pages after adding swap and making them evictable again. But
nowadays, swap-backed pages on the anon LRU list are not scanned without
available swap space anyway, so there is no point in moving them to a
separate list anymore.
The manual rescue could also be used in case pages were stranded on the
unevictable list due to race conditions. But the code has been around for
a while now and newly discovered bugs should be properly reported and
dealt with instead of relying on such a manual fixup.
In addition to the lack of a usecase, the sysfs interface to rescue pages
from a specific NUMA node has been broken since its introduction, so it's
unlikely that anybody ever relied on that.
This patch removes the functionality behind the sysctl and the
node-interface and emits a one-time warning when somebody tries to access
either of them.
Signed-off-by: Johannes Weiner <jweiner@redhat.com>
Reported-by: Kautuk Consul <consul.kautuk@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
write_scan_unevictable_node() checks the value req returned by
strict_strtoul() and returns 1 if req is 0.
However, when strict_strtoul() returns 0, it means successful conversion
of buf to unsigned long.
Due to this, the function was not proceeding to scan the zones for
unevictable pages even though we write a valid value to the
scan_unevictable_pages sys file.
Change this check slightly to check for invalid value in buf as well as 0
value stored in res after successful conversion via strict_strtoul. In
both cases, we do not perform the scanning of this node's zones.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There 2 places to read pgdat in kswapd. One is return from a successful
balance, another is waked up from kswapd sleeping. The new_order and
new_classzone_idx represent the balance input order and classzone_idx.
But current new_order and new_classzone_idx are not assigned after
kswapd_try_to_sleep(), that will cause a bug in the following scenario.
1: after a successful balance, kswapd goes to sleep, and new_order = 0;
new_classzone_idx = __MAX_NR_ZONES - 1;
2: kswapd waked up with order = 3 and classzone_idx = ZONE_NORMAL
3: in the balance_pgdat() running, a new balance wakeup happened with
order = 5, and classzone_idx = ZONE_NORMAL
4: the first wakeup(order = 3) finished successufly, return order = 3
but, the new_order is still 0, so, this balancing will be treated as a
failed balance. And then the second tighter balancing will be missed.
So, to avoid the above problem, the new_order and new_classzone_idx need
to be assigned for later successful comparison.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Tested-by: Pádraig Brady <P@draigBrady.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 215ddd66 ("mm: vmscan: only read new_classzone_idx from pgdat
when reclaiming successfully") , Mel Gorman said kswapd is better to sleep
after a unsuccessful balancing if there is tighter reclaim request pending
in the balancing. But in the following scenario, kswapd do something that
is not matched our expectation. The patch fixes this issue.
1, Read pgdat request A (classzone_idx, order = 3)
2, balance_pgdat()
3, During pgdat, a new pgdat request B (classzone_idx, order = 5) is placed
4, balance_pgdat() returns but failed since returned order = 0
5, pgdat of request A assigned to balance_pgdat(), and do balancing again.
While the expectation behavior of kswapd should try to sleep.
Signed-off-by: Alex Shi <alex.shi@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Pádraig Brady <P@draigBrady.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's possible a zone watermark is ok when entering the balance_pgdat()
loop, while the zone is within the requested classzone_idx. Count pages
from this zone into `balanced'. In this way, we can skip shrinking zones
too much for high order allocation.
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When direct reclaim encounters a dirty page, it gets recycled around the
LRU for another cycle. This patch marks the page PageReclaim similar to
deactivate_page() so that the page gets reclaimed almost immediately after
the page gets cleaned. This is to avoid reclaiming clean pages that are
younger than a dirty page encountered at the end of the LRU that might
have been something like a use-once page.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Workloads that are allocating frequently and writing files place a large
number of dirty pages on the LRU. With use-once logic, it is possible for
them to reach the end of the LRU quickly requiring the reclaimer to scan
more to find clean pages. Ordinarily, processes that are dirtying memory
will get throttled by dirty balancing but this is a global heuristic and
does not take into account that LRUs are maintained on a per-zone basis.
This can lead to a situation whereby reclaim is scanning heavily, skipping
over a large number of pages under writeback and recycling them around the
LRU consuming CPU.
This patch checks how many of the number of pages isolated from the LRU
were dirty and under writeback. If a percentage of them under writeback,
the process will be throttled if a backing device or the zone is
congested. Note that this applies whether it is anonymous or file-backed
pages that are under writeback meaning that swapping is potentially
throttled. This is intentional due to the fact if the swap device is
congested, scanning more pages and dispatching more IO is not going to
help matters.
The percentage that must be in writeback depends on the priority. At
default priority, all of them must be dirty. At DEF_PRIORITY-1, 50% of
them must be, DEF_PRIORITY-2, 25% etc. i.e. as pressure increases the
greater the likelihood the process will get throttled to allow the flusher
threads to make some progress.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vladimir Davydov
