Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or
becoming root oneself or it errors out. Unless already running
as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a
good default.
With this patch applied, you can run "make oldconfig deb-pkg" as
an ordinary user to build a binary package for an updated kernel
tree and it should just work.
fakeroot is too zealous by default in treating files as owned by
root. Its wrapped stat() sets st_uid and st_gid to 0 for all
files, which causes Git to go on a wild goose chase if
CONFIG_LOCALVERSION_AUTO is set, checking if any file's content
has changed along with its stat information. Avoid this by
telling fakeroot to use the actual owner and group for
preexisting files, by passing it the -u option.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Let the deb-pkg target acquire (fake) root privileges before
running commands that need them. Without such privileges,
deb-pkg errors out because chown fails.
The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a
command to run other commands with possibly fake elevated
privileges. Since this is not needed for the tar-pkg and rpm-pkg
targets, it is only used by deb-pkg. If it is not defined, the
behavior is as before, and the user will have to rerun make as
root.
In other words, as a shortcut, instead of running 'make oldconfig &&
make && fakeroot -u make deb-pkg', one can use the single command
'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'.
Suggested-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Use the --owner= and --group= options to make sure the entries in
the built tar file are owned by root. Without this change, a
careless sysadmin using the tar-pkg target can easily end up
installing a kernel that is writable by the unprivileged user
account used to build the kernel.
Test that these options are understood before using them so that
non-GNU versions of tar can still be used if the operator is
appropriately cautious.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The binrpm-pkg target (binary RPM only) fails when called with
KBUILD_OUTPUT set. This patch makes it work.
For the rpm-pkg target (source + binary RPM), building with
KBUILD_OUTPUT set is not possible and also not needed as the
actual build is done in a temporary directory anyway, so check
that KBUILD_OUTPUT is not set in that case to avoid later errors.
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
bash versus dash and posh disagree on expanding $@ within double quotes:
export x="$@"
see http://bugs.debian.org/381091 for details
just use the arglist with $*.
dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install):
subprocess pre-installation script returned error exit status 2
export: 6: 2.6.31-rc1-18: bad variable name
fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567
seen on Ubuntu as there dash is the default sh,
versus bash on Debian.
Reported-by: Pauli <suokkos@gmail.com>
Cc: Frans Pop <elendil@planet.nl>
Signed-off-by: maximilian attems <max@stro.at>
Acked-By: Andres Salomon <dilinger@collabora.co.uk>
In the series for 2.6.31 it was noticed to ship the copyright,
but the generated changelog got lost somehow.
As bonus the generated linux-image deb packages are Lenny lintian clean.
Cc: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Latest Debian policy is 3.8.1.
Even if we are not yet compliant to it strive for the latest.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Section "base" has been removed, the base is defined by Priority field.
For Squeeze the section should be "kernel", but as that's not yet
supported for Sarge and Etch we stay with admin for now.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
kernel-image naming has been dropped for the Lenny release
and was only transitional for Etch.
As it builds modules it provides linux-modules-$version.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The binary package that make deb-pkg creates is a linux-image.
To be fixed may also be the addition of $DEB_ARCH.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The Source: field is defined as the source package in the package
archive from which a binary packages are built. As deb-pkg does not
generate a source package, we should avoid to use any existing source
packages here.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Try harder to find email and maintainer name.
Debian's own devscripts all use DEBEMAIL or DEBFULLNAME prior to an
eventual EMAIL or NAME environment variable. Match their logic.
"Anonymous" sounds nicer then "Kernel Compiler" if no name is found.
Signed-off-by: maximilian attems <max@stro.at>
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
On Thursday 23 April 2009, Frans Pop wrote:
Add a basic debian/copyright to the binary packages.
Based on an earlier patch from Maximilian Attems.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Hook scripts in the default directory /etc/kernel are also executed by
official Debian kernel packages as well as kernel packages created using
make-kpkg. Allow to specify an alternative hook scripts directory by
exporting the environment variable KDEB_HOOKDIR.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Allow to specify a custom revision for the generated .deb by
exporting the environment variable KDEB_PKGVERSION.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The Debian packaging scripts created by the deb-pkg target do not pass
on the standard Debian maintainer script parameters to hook scripts,
which means that those scripts cannot tell whether they are being called
during e.g. install vs. upgrade, or removal vs. purge of the package.
As there are several variantions in how hook scripts are called from
kernel packages, we pass the parameters in the environment variable
DEB_MAINT_PARAMS rather than as extra arguments.
Bump version of builddep script to 1.3.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Not all architectures prepend the $(boot) path in $(KBUILD_IMAGE).
Allow for that fact in the builddeb script. Example is arm.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Factor out code to build package into separate function and
only write "source" section for the debian/control file once.
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: maximilian attems <max@stro.at>
Cc: Andres Salomon <dilinger@debian.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Minor coding style improvements and typo fix in leading comment.
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source
tree under SCM. This is due to KERNELRELEASE being different when the initial make
is run and when make is run from rpmbuild.
mkspec creates kernel.spec using KERNELRELEASE:
<mkspec>
echo "%files"
echo '%defattr (-, root, root)'
echo "%dir /lib/modules"
echo "/lib/modules/$KERNELRELEASE"
echo "/lib/firmware"
echo "/boot/*"
echo ""
</mkspec>
When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any
additional version info from SCM. Next, the srctree is tarred up and SCM
information is excluded.
rpmbuild reruns make and in the process generates a new include/config/kernel.release
and thus a new KERNELRELEASE. However this time the SCM information is gone so
KERNELRELEASE no longer has the additional version information. When "make modules_install"
runs, it uses the new KERNELRELEASE value to determine where to install the modules.
This conflicts with where the spec file assumes they are going because of the
mis-matching KERNELRELEASE versions.
<snippet>
+ INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root
+ make -j16 modules_install
INSTALL crypto/aead.ko
INSTALL crypto/cbc.ko
INSTALL crypto/chainiv.ko
INSTALL crypto/crc32c.ko
INSTALL crypto/crypto_algapi.ko
INSTALL crypto/crypto_blkcipher.ko
INSTALL crypto/crypto_hash.ko
INSTALL crypto/cryptomgr.ko
INSTALL crypto/ecb.ko
INSTALL crypto/eseqiv.ko
INSTALL crypto/krng.ko
INSTALL crypto/md5.ko
INSTALL crypto/pcbc.ko
INSTALL crypto/rng.ko
INSTALL drivers/block/cciss.ko
INSTALL drivers/hid/hid-dummy.ko
INSTALL drivers/scsi/iscsi_tcp.ko
INSTALL drivers/scsi/libiscsi.ko
INSTALL drivers/scsi/libiscsi_tcp.ko
INSTALL drivers/scsi/scsi_transport_iscsi.ko
INSTALL drivers/scsi/scsi_wait_scan.ko
INSTALL fs/lockd/lockd.ko
INSTALL fs/nfs/nfs.ko
INSTALL fs/nfsd/nfsd.ko
INSTALL lib/libcrc32c.ko
INSTALL net/sunrpc/sunrpc.ko
DEPMOD 2.6.29-rc4-tip
+ cp arch/x86/boot/bzImage
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422
+ cp System.map
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422
+ cp .config
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422
+ cp vmlinux vmlinux.orig
+ bzip2 -9 vmlinux
+ mv vmlinux.bz2
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2
+ mv vmlinux.orig vmlinux
+ /usr/lib/rpm/brp-compress
Processing files: kernel-2.6.29rc4tip01479g5d85422-2
error: File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
RPM build errors:
File not found:
/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422
make[1]: *** [rpm] Error 1
make: *** [rpm] Error 2
</snippet>
I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both
with and without CONFIG_LOCALVERSION_AUTO=y.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
----
The contents of the %clean section in mkspec is currently commented
out leaving RPM_BUILD_ROOT and its contents on the build machine.
This patch removes it once the rpm build process is complete.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
We are building an automated system to test kernels weekly and need to
provide an rpm to our QA dept. We would like to use the ability to create
kernel rpms already in the kernel's Makefile, but need the vmlinux file
included in the rpm for later debugging.
This patch adds a compressed vmlinux to the kernel rpm when doing a
make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot.
Signed-off-by: Josh Hunt <josh@scalex86.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Given that there is no usage of a TAR_IGNORE variable remove it
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Add a RPMOPTS make variable to allow arbitrary options to be passed
to rpm during 'make rpm-pkg'. For example:
make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro
defined, the build fails with:
[snip]
Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959
+ umask 022
+ cd /home/jk/devel/kernel-snapshot/rpm/BUILD
+ cd kernel-2.6.26
+ make clean
+ make '%{_smp_mflags}'
make[3]: *** No rule to make target `%{_smp_mflags}'. Stop.
error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build)
This change uses the 'null if not set' reference to the _smp_mflags
macro instead.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel.
This is regression in 2.6.27. 2.6.26 make rpm work good.
In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)."
Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stable <stable@kernel.org>
If CONIFIG_LOCALVERSION is set for example to -loop, the following error
message was generated.
dpkg-deb - error: Debian revision (`loop') doesn't contain any digits
dpkg-deb: 1 errors in control file
The patch solves this by adding a numeric revision to package version.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
http://bugzilla.kernel.org/show_bug.cgi?id=8941
Current Debian's kernel-modules depend on matching linux-image-$version, though
Linux's make deb-pkg build a .deb that 'Provides: kernel-image-$version' only.
The following patch adds the Debian-compliant 'Provides', leaving the default
one; hopely this will make way all happy.
Signed-off-by: paolo <oopla@users.sf.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
"mkdir -p" does not only mean not to complain if the directory already
exists, but also to create the parent directories if needed. This patch
removes "lib" from the list of directories to create as we will also create
"lib/modules".
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The default target for most powerpc platforms is zImage. The
zImage however is in arch/powerpc/boot and the mkspec script
was set up to get the kernel from the top level of the kernel
tree. This patch copies vmlinux to arch/powerpc/boot and then
copies the kernel to the tmp directory so the rpm can be made.
Signed-off-by: Mike Wolf <mjw@us.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
.PHONY: does not take patterns so use FORCE to achive same effect.
Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
The kbuild system takes advantage of an incorrect behavior in GNU make.
Once this behavior is fixed, all files in the kernel rebuild every time,
even if nothing has changed. This patch ensures kbuild works with both
the incorrect and correct behaviors of GNU make.
For more details on the incorrect behavior, see:
http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html
Changes in this patch:
- Keep all targets that are to be marked .PHONY in a variable, PHONY.
- Add .PHONY: $(PHONY) to mark them properly.
- Remove any $(PHONY) files from the $? list when determining whether
targets are up-to-date or not.
Signed-off-by: Paul Smith <psmith@gnu.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fix out-of-tree builds for the tar-pkg targets
When I wrote the buildtar script, I didn't even think about
out-of-tree builds because I didn't use these back then. This patch
throughoutly uses ${objtree} instead of `pwd`.
Also, the kernel version is no longer manually built. Instead, it will
properly use $KERNELRELEASE . Installing modules is only done if
CONFIG_MODULES is set.
Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
From: Ryan Anderson <ryan@michonline.com>
When running "make O=something deb-pkg", I get a failure that claims I
haven't configured my kernel (I have). Running it a second time tells
me to run "make mrproper" (include/linux/version.h got built on the
first run)
Original patch from:
From: Ajay Patel <patela@gmail.com>
With modifications from:
Signed-off-By: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
From: Ryan Anderson <ryan@michonline.com>
This pulls the description from the Debian user-mode-linux package, and
puts $version back in the appropriate places for both descriptions.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
From: Ryan Anderson <ryan@michonline.com>
Make the deb-pkg build target understand the "um" arch and set up the
package and directory structure to match a mainline-Debian style
user-mode-linux package.
This is primarily so that it stops matching, exactly, the naming
convention used by normal, non-UML kernels generated by this command.
Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel
doesn't do the right thing. This fixes that.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This patch fixes the output of "make help" to fit in a 80 column
screen. Please push upstream as part of your other patches.
Signed-off-by: Yum Rayan <yum.rayan@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
On ia64, only the EFI (fat) partition is available to boot from. The rpm
needs to install the kernel under /boot/efi to be useable on ia64.
Signed-off-by: Greg Edwards <edwardsg@sgi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
It adds tarball packaging, which I prefer for distribution.
Also one of the two blanks after @echo is removed. One seems to be enough :)
Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Jonathan Nieder