Commit Graph

24 Commits

Author SHA1 Message Date
Jon Smirl 8ba4773aee powerpc: Fix format string warning in arch/powerpc/boot/main.c
Fix format string warning in arch/powerpc/boot/main.c.  Also correct
a typo ("uncomressed") on the same line.

 BOOTCC  arch/powerpc/boot/main.o
arch/powerpc/boot/main.c: In function 'prep_kernel':
arch/powerpc/boot/main.c:65: warning: format '%08x' expects type
'unsigned int', but argument 3 has type 'long unsigned int'

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-31 20:14:19 +11:00
Sebastian Siewior c10c178a92 powerpc/boot: Compare _start against ei.loadsize instead ei.memsize
If the vmlinux binary in memory is larger than 4 MiB than it collides
with the initial boot code which is linked at 4 MiB in case of cuBoot.
If the the uncompressed image size (on disk size) is less than 4 MiB
then it would fit. The difference between those two sizes is the bss
section. In cuBoot we have the dtb embedded right after the data
section so it is very likely that the reset of the bss section (in
kernel's start up code) will overwrite the dtb blob. Therefore we
reallocate the dtb. Something similar is allready done to the initrd.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-21 15:17:47 +11:00
David Gibson 430b01e8f5 [POWERPC] Kill flatdevtree.c
Now that earlier patches have switched the bootwrapper to using libfdt
for device tree manipulation, this patch removes the now unused
flatdevtree.c and related files.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 13:46:15 +11:00
Scott Wood 2f1d489932 [POWERPC] bootwrapper: Move linker symbols into ops.h
Most of these were previously used by numerous C files and
redeclared in each one.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-22 15:27:28 +10:00
Geoff Levand 62cf6a9d65 [POWERPC] Make kernel_entry_t have global scope in bootwrapper
For the convenience of custom platform code make the powerpc
bootwrapper typdef kernel_entry_t global in scope.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-28 19:16:50 +10:00
Milton Miller 02cc51149f [POWERPC] bootwrapper: Decompress less, check more
Our kernels put everything in the first load segment, and we read that.
Instead of decompressing to the end of the gzip stream or supplied image
and hoping we get it all, decompress the expected size and complain if
it is not available.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:17 +10:00
Mark A. Greer 88e687313e [POWERPC] Move bootwrapper ELF parsing routines to a file
The ELF parsing routines local to arch/powerpc/boot/main.c are useful
to other callers therefore move them to their own file.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:16 +10:00
David Gibson 3af82a8b00 [POWERPC] Clean up zImage handling of the command line
This cleans up how the zImage code manipulates the kernel
command line.  Notable improvements from the old handling:
	- Command line manipulation is consolidated into a new
prep_cmdline() function, rather than being scattered across start()
and some helper functions
	- Less stack space use: we use just a single global command
line buffer, which can be initialized by an external tool as before,
we no longer need another command line sized buffer on the stack.
	- Easier to support platforms whose firmware passes a
commandline, but not a device tree.  Platform code can now point new
loader_info fields to the firmware's command line, rather than having
to do early manipulation of the /chosen bootargs property which may
then be rewritten again by the core.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson 27fbaa9702 [POWERPC] Add device tree utility functions to zImage
This patch adds a library of useful device tree manipulation functions
to the zImage library, for use by platform code.  These functions are
based on the hooks already in dt_ops, so they're not dependent on a
particular device tree implementation.  This patch also slightly
streamlines the code in main.c using these new functions.

This is a consolidation of my work in this area with Scott Wood's
patches to a very similar end.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
David Gibson e5a2072bd4 [POWERPC] New reg.h for the zImage
This patch adds a reg.h to the zImage code, with common definitions
for accessing system registers.  For now, this includes functions for
retrieving the PVR and the stack pointer.  This patch then uses the
new reg.h to let start() display the running stack address without
having to explicitly pass the stack as a parameter from the asm code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
David Gibson fae59c39e8 [POWERPC] Add gcc format warnings to zImage printf()
This patch adds the correct attributes to the zImage's versions of
printf to make gcc generate format string mismatch warnings.  It also
corrects several minor problems with format strings in the zImage thus
discovered.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 6a923216aa [POWERPC] bootwrapper: Add a fatal error helper
Add a macro fatal that calls printf then exit.  User must include stdio.h.

Typically replaces 3 lines with 1, although I added back some whitespace.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 0e6806734f [POWERPC] boot: export flush_cache
Move the declaration of flush_cache to ops.h for use by platform code.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-21 22:35:42 +11:00
David Gibson cd197ffcf1 [POWERPC] zImage: Cleanup and improve zImage entry point
This patch re-organises the way the zImage wrapper code is entered, to
allow more flexibility on platforms with unusual entry conditions.
After this patch, a platform .o file has two options:

1) It can define a _zimage_start, in which case the platform code gets
   control from the very beginning of execution.  In this case the
   platform code is responsible for relocating the zImage if necessary,
   clearing the BSS, performing any platform specific initialization, and
   finally calling start() to load and enter the kernel.

2) It can define platform_init().  In this case the generic crt0.S
   handles initial entry, and calls platform_init() before calling
   start().  The signature of platform_init() is changed, however, to
   take up to 5 parameters (in r3..r7) as they come from the platform's
   initial loader, instead of a fixed set of parameters based on OF's
   usage.

   When using the generic crt0.S, the platform .o can optionally
   supply a custom stack to use, using the BSS_STACK() macro.  If this
   is not supplied, the crt0.S will assume that the loader has
   supplied a usable stack.

In either case, the platform code communicates information to the
generic code (specifically, a PROM pointer for OF systems, and/or an
initrd image address supplied by the bootloader) via a global
structure "loader_info".

In addition the wrapper script is rearranged to ensure that the
platform .o is always linked first.  This means that platforms where
the zImage entry point is at a fixed address or offset, rather than
being encoded in the binary header can be supported using option (1).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:03 +11:00
David Gibson 79c8541924 [POWERPC] zImage: Cleanup and improve prep_kernel()
This patch rewrites prep_kernel() in the zImage wrapper code to be
clearer and more flexible.  Notable changes:

	- Handling of the initrd image from prep_kernel() has moved
into a new prep_initrd() function.
	- The address of the initrd image is now added as device tree
properties, as the kernel expects.
	- We only copy a packaged initrd image to a new location if it
is in danger of being clobbered when the kernel moves to its final
location, instead of always.
	- By default we decompress the kernel directly to address 0,
instead of requiring it to relocate itself.  Platforms (such as OF)
where doing this could clobber still-live firmware data structures can
override the vmlinux_alloc hook to provide an alternate place to
decompress the kernel.
	- We no longer pass lots of information between functions in
global variables.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:01 +11:00
David Gibson ad9d2716cf [POWERPC] zImage: Add more flexible gunzip convenience functions
At present, arch/powerpc/boot/main.c includes a gunzip() function
which is a convenient wrapper around zlib.  However, it doesn't
conveniently allow decompressing part of an image to one location,
then the remainder to a different address.

This patch adds a new set of more flexible convenience wrappers around
zlib, moving them to their own file, gunzip_util.c, in the process.
These wrappers allow decompressing sections of the compressed image to
different locations.  In addition, they transparently handle
uncompressed data, avoiding special case code to handle uncompressed
vmlinux images.

The patch also converts main.c to use the new wrappers, using the new
flexibility to avoid decompressing the vmlinux's ELF header twice as
we did previously.  That in turn means we avoid extending our
allocations for the vmlinux to allow space for the extra copy of the
ELF header.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:01 +11:00
David Gibson 35af89eb49 [POWERPC] Cleanup zImage handling of kernel entry with flat device tree
This makes 2 changes to clean up the flat device tree handling
logic in the zImage wrapper.

First, there were two callbacks from the dt_ops structure used for
producing a final flat tree to pass to the kerne: dt_ops.ft_pack()
which packed the flat tree (possibly a no-op) and dt_ops.ft_addr()
which retreived the address of the final blob.  Since they were only
ever called together, this patch combines the two into a single new
callback, dt_ops.finalize().  This new callback does whatever
platform-dependent things are necessary to produce a final flat device
tree blob, and returns the blob's addres.

Second, the current logic calls the kernel with a flat device tree if
one is build into the zImage wrapper, otherwise it boots the kernel
with a PROM pointer, expecting the kernel to copy the OF device tree
itself.  This approach precludes the possibility of the platform
wrapper code building a flat device tree from whatever
platform-specific information firmware provides.  Thus, this patch
takes the more sensible approach of invoking the kernel with a flat
tree if the dt_ops.finalize callback provides one (by whatever means).

So, the dt_ops.finalize callback can be NULL, or can be a function
which returns NULL.  In either case, the zImage wrapper logic assumes
that this is a platform with OF and invokes the kernel accordingly.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:34 +11:00
David Gibson f79e083c2f [POWERPC] Small clarification of initrd handling
This patch makes the handling of the initrd (or initramfs) in the
zImage wrapper a little easier to follow.  Instead of passing the
initrd addresses out from prep_kernel() via the cryptic a1 and a2
parameters, use the global struct add_range, 'initrd'.  prep_kernel()
already passes information through the 'vmlinux' addr_range struct, so
this seems like a reasonable extension.

Some comments also clarify the logic with prep_kernel(): we use an
initrd included in the zImage if present, otherwise we use an initrd
passed in by the bootloader in the a1 and a2 parameters (yaboot, at
least, uses this mechanism to pass an initrd).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:32 +11:00
Mark A. Greer c888554bf9 [POWERPC] More bootwrapper reorganization
More reorganization of the bootwrapper:
- Add dtb section to zImage
- ft_init now called by platform_init
- Pack a flat dt before calling kernel
- Remove size parameter from free
- printf only calls console_ops.write it its not NULL
- Some cleanup

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-18 15:50:18 +10:00
Mark A. Greer b2c5f61920 [POWERPC] Start arch/powerpc/boot code reorganization
This abstracts the operations used in the bootwrapper, and defines
the operations needed for the bootwrapper to run on an OF platform.

The operations have been divided up into platform ops (platform_ops),
firmware ops (fw_ops), device tree ops (dt_ops), and console ops
(console_ops).

The proper operations will be hooked up at runtime to provide the
functionality that you need.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-20 15:09:58 +10:00
mostrows@watson.ibm.com 30d8caf7c6 [POWERPC] Editable kernel command-line in zImage binary.
zImage will set /chosen/bootargs (if it is otherwise empty) with the
contents of a buffer in the section "__builtin_cmdline".  This permits
tools to edit zImage binaries to set the command-line eventually
processed by vmlinux.

--
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-15 19:31:25 +10:00
Olaf Hering 158daa4cc8 [PATCH] powerpc: remove check for ELF offset in powerpc bootimage
Do not check for offset, it is always set.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:38:39 +11:00
Paul Mackerras 66a45dd362 powerpc: Make COFF zImages for old 32-bit powermacs
This adds code to build zImage.coff and/or zImage.initrd.coff when
CONFIG_PPC32 and CONFIG_PPC_PMAC are defined.  It also restructures
the OF client code and adds some workarounds for OF quirks on the
older machines.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 15:04:06 +11:00
Paul Mackerras 94b212c29f powerpc: Move ppc64 boot wrapper code over to arch/powerpc
This also extends the code to handle 32-bit ELF vmlinux files as well
as 64-bit ones.  This is sufficient for booting on new-world 32-bit
powermacs (i.e. all recent machines).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:52:21 +11:00