Commit Graph

75 Commits

Author SHA1 Message Date
Linus Torvalds 41d5e08ea8 TTY/Serial patches for 4.1-rc1
Here's the big tty/serial driver update for 4.1-rc1.
 
 It was delayed for a bit due to some questions surrounding some of the
 console command line parsing changes that are in here.  There's still
 one tiny regression for people who were previously putting multiple
 console command lines and expecting them all to be ignored for some odd
 reason, but Peter is working on fixing that.  If not, I'll send a revert
 for the offending patch, but I have faith that Peter can address it.
 
 Other than the console work here, there's the usual serial driver
 updates and changes, and a buch of 8250 reworks to try to make that
 driver easier to maintain over time, and have it support more devices in
 the future.
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlU2IcUACgkQMUfUDdst+ylFqACcC8LPhFEZg9aHn0hNUoqGK3rE
 5dUAnR4b8r/NYqjVoE9FJZgZfB/TqVi1
 =lyN/
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial updates from Greg KH:
 "Here's the big tty/serial driver update for 4.1-rc1.

  It was delayed for a bit due to some questions surrounding some of the
  console command line parsing changes that are in here.  There's still
  one tiny regression for people who were previously putting multiple
  console command lines and expecting them all to be ignored for some
  odd reason, but Peter is working on fixing that.  If not, I'll send a
  revert for the offending patch, but I have faith that Peter can
  address it.

  Other than the console work here, there's the usual serial driver
  updates and changes, and a buch of 8250 reworks to try to make that
  driver easier to maintain over time, and have it support more devices
  in the future.

  All of these have been in linux-next for a while"

* tag 'tty-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (119 commits)
  n_gsm: Drop unneeded cast on netdev_priv
  sc16is7xx: expose RTS inversion in RS-485 mode
  serial: 8250_pci: port failed after wakeup from S3
  earlycon: 8250: Document kernel command line options
  earlycon: 8250: Fix command line regression
  earlycon: Fix __earlycon_table stride
  tty: clean up the tty time logic a bit
  serial: 8250_dw: only get the clock rate in one place
  serial: 8250_dw: remove useless ACPI ID check
  dmaengine: hsu: move memory allocation to GFP_NOWAIT
  dmaengine: hsu: remove redundant pieces of code
  serial: 8250_pci: add Intel Tangier support
  dmaengine: hsu: add Intel Tangier PCI ID
  serial: 8250_pci: replace switch-case by formula for Intel MID
  serial: 8250_pci: replace switch-case by formula
  tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1
  serial: jsm: some off by one bugs
  serial: xuartps: Fix check in console_setup().
  serial: xuartps: Get rid of register access macros.
  serial: xuartps: Fix iobase use.
  ...
2015-04-21 09:33:10 -07:00
Al Viro c0fec3a98b Merge branch 'iocb' into for-next 2015-04-11 22:24:41 -04:00
Peter Hurley c7cef0a849 console: Add extensible console matching
Add match() method to struct console which allows the console to
perform console command line matching instead of (or in addition to)
default console matching (ie., by fixed name and index).

The match() method returns 0 to indicate a successful match; normal
console matching occurs if no match() method is defined or the
match() method returns non-zero. The match() method is expected to set
the console index if required.

Re-implement earlycon-to-console-handoff with direct matching of
"console=uart|uart8250,..." to the 8250 ttyS console.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-26 16:16:20 +01:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Christoph Hellwig 66ee59af63 fs: remove ki_nbytes
There is no need to pass the total request length in the kiocb, as
we already get passed in through the iov_iter argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-12 23:50:23 -04:00
Greg Kroah-Hartman becba85f0e Merge 4.0-rc3 into tty-testing
This resolves a merge issue in drivers/tty/serial/8250/8250_pci.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-09 07:08:37 +01:00
Peter Hurley f427c990e2 console: Preserve index after console setup()
Before register_console() calls the setup() method of the matched
console, the registering console index is already equal to the index
from the console command line; ie. newcon->index == c->index.

This change is also required to support extensible console matching;
(the command line index may have no relation to the console index
assigned by the console-defined match() function).

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:55:08 +01:00
Peter Hurley 30a22c215a console: Fix console name size mismatch
commit 6ae9200f2c ("enlarge console.name") increased the storage
for the console name to 16 bytes, but not the corresponding
struct console_cmdline::name storage. Console names longer than
8 bytes cause read beyond end-of-string and failure to match
console; I'm not sure if there are other unexpected consequences.

Cc: <stable@vger.kernel.org> # 2.6.22+
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-07 03:39:55 +01:00
Linus Torvalds 4fbd0a81a0 KGDB/KDB New:
* KDB: improved searching
    * No longer enter debug core on panic if panic timeout is set
 
 KGDB/KDB regressions / cleanups
    * fix pdf doc build errors
    * prevent junk characters on kdb console from printk levels
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJU5qxHAAoJEIciOldedpOjliYP/izuoNZ/EtjjeihOL44ic0o0
 cmvdSc/ovR/mO4fbDpftMB0nhzclgRyAvr+VTPd3Bp5Poh+wJ0ZKu1R7f+ioSN73
 Y4ek9PJqPSBQr+JdfPK80N56Choeni48bsC6up12i3BTfXobj81zlu4Sj0SMOoHq
 IkFkB7soRuiFoc5IkKMvf3N3T9j1PnEULmHteNDRr0hTmGipEzkD3zocc/bRFV/l
 JTZRzIMGBNGnF01DPLDcuvbu0wGBh6ADMBLtx5v1UrhV32ypfJq2bgxFvgM/AXn2
 3VG4HcRbVsGmlBOahFR6X0DE/WAplw01yu1EabR2EWUePyz41cnSkxl4nR/NNhwz
 qMbr3uzu1iWUTTz5ySRcWxSuRRCihVQqNk6p+y21N/jY/5cr2jI03qJm0zZ/ObqL
 VUcPE7CfdcriCDXoepgXZE4XfX65Jf5tUiyiCj+1ds05ab5qHELIwKOZdjU2ON1b
 pb2ElPngGSEEoU/eSDgP2RVJ9Mk/k5s2TxaPXVJNkeWGNxPU5HtCytZpVI5hckbP
 /NZWTtyUDZ85is8cWUkHEdjnQ+CdzaA/FwJEqnB0or2is91mo8uBxP5BvdqPnPL0
 QdPPnVgD72dumXfJpH2HY3DdUs24LaP0vgSO8ELKgfA67nprS+5xztNSd8ekNnhF
 4wMhZbuAhB68E6bA0X7G
 =TH0R
 -----END PGP SIGNATURE-----

Merge tag 'for_linux-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb

Pull kgdb/kdb updates from Jason Wessel:
 "KGDB/KDB New:
   - KDB: improved searching
   - No longer enter debug core on panic if panic timeout is set

  KGDB/KDB regressions / cleanups
   - fix pdf doc build errors
   - prevent junk characters on kdb console from printk levels"

* tag 'for_linux-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  kgdb, docs: Fix <para> pdfdocs build errors
  debug: prevent entering debug mode on panic/exception.
  kdb: Const qualifier for kdb_getstr's prompt argument
  kdb: Provide forward search at more prompt
  kdb: Fix a prompt management bug when using | grep
  kdb: Remove stack dump when entering kgdb due to NMI
  kdb: Avoid printing KERN_ levels to consoles
  kdb: Fix off by one error in kdb_cpu()
  kdb: fix incorrect counts in KDB summary command output
2015-02-20 15:13:29 -08:00
Daniel Thompson f7d4ca8bbf kdb: Avoid printing KERN_ levels to consoles
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19 12:39:02 -06:00
Joe Perches 205bd3d23e printk: correct timeout comment, neaten MODULE_PARM_DESC
Neaten the MODULE_PARAM_DESC message.
Use 30 seconds in the comment for the zap console locks timeout.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:13 -08:00
Linus Torvalds 8f4385d590 This code is a fork from the trace-3.19 pull as it needed the trace_seq
clean ups from that branch.
 
 This code solves the issue of performing stack dumps from NMI context.
 The issue is that printk() is not safe from NMI context as if the NMI
 were to trigger when a printk() was being performed, the NMI could
 deadlock from the printk() internal locks. This has been seen in practice.
 
 With lots of review from Petr Mladek, this code went through several
 iterations, and we feel that it is now at a point of quality to be
 accepted into mainline.
 
 Here's what is contained in this patch set:
 
  o Creates a "seq_buf" generic buffer utility that allows a descriptor
    to be passed around where functions can write their own "printk()"
    formatted strings into it. The generic version was pulled out of
    the trace_seq() code that was made specifically for tracing.
 
  o The seq_buf code was change to model the seq_file code. I have
    a patch (not included for 3.19) that converts the seq_file.c code
    over to use seq_buf.c like the trace_seq.c code does. This was done
    to make sure that seq_buf.c is compatible with seq_file.c. I may
    try to get that patch in for 3.20.
 
  o The seq_buf.c file was moved to lib/ to remove it from being dependent
    on CONFIG_TRACING.
 
  o The printk() was updated to allow for a per_cpu "override" of
    the internal calls. That is, instead of writing to the console, a call
    to printk() may do something else. This made it easier to allow the
    NMI to change what printk() does in order to call dump_stack() without
    needing to update that code as well.
 
  o Finally, the dump_stack from all CPUs via NMI code was converted to
    use the seq_buf code. The caller to trigger the NMI code would wait
    till all the NMIs finished, and then it would print the seq_buf
    data to the console safely from a non NMI context.
 
 [ Updated to remove unnecessary preempt_disable in printk() ]
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUi8A8AAoJEEjnJuOKh9ldv0sH/A+l9Ewrc3Kd0XuUKX9UO9Mj
 yrDz5dSWTxD6Pi7ni5Zo2f/MebXhrgS8gF1MBN1HMS5s9/9XdTTQijosOfs75iFd
 xufiDur7ssl2EOLB/ouqWVn16tu1PrPyw+U76JUZvsYlIMSWQu2FH8DSdo59N6Iz
 7RxS8rtxJ2IwehmO7tu2Lq5rB7zGL4SET5oIfQ1+KnjzqB5Z1bfm9nGwAc8nozx8
 3MqwsClEnXBTkY4eYZzu9wD7Nl/eknzTrk8KDbQ49oTYmoBuuh/s1FMuxe75cY55
 wEtDA6HvvTXYnw6YOAMUB41cGnRg3KVRmmhcH5T9jrBxg2iZjXYa8iZxvcAM6Es=
 =zDMJ
 -----END PGP SIGNATURE-----

Merge tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixlet from Steven Rostedt:
 "Remove unnecessary preempt_disable in printk()"

* tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  printk: Do not disable preemption for accessing printk_func
2014-12-13 14:04:41 -08:00
Steven Rostedt (Red Hat) 1fb8915b98 printk: Do not disable preemption for accessing printk_func
As printk_func will either be the default function, or a per_cpu function
for the current CPU, there's no reason to disable preemption to access
it from printk. That's because if the printk_func is not the default
then the caller had better disabled preemption as they were the one to
change it.

Link: http://lkml.kernel.org/r/CA+55aFz5-_LKW4JHEBoWinN9_ouNcGRWAF2FUA35u46FRN-Kxw@mail.gmail.com

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-12-11 09:12:01 -05:00
Linus Torvalds 350e4f4985 This code is a fork from the trace-3.19 pull as it needed the trace_seq
clean ups from that branch.
 
 This code solves the issue of performing stack dumps from NMI context.
 The issue is that printk() is not safe from NMI context as if the NMI
 were to trigger when a printk() was being performed, the NMI could
 deadlock from the printk() internal locks. This has been seen in practice.
 
 With lots of review from Petr Mladek, this code went through several
 iterations, and we feel that it is now at a point of quality to be
 accepted into mainline.
 
 Here's what is contained in this patch set:
 
  o Creates a "seq_buf" generic buffer utility that allows a descriptor
    to be passed around where functions can write their own "printk()"
    formatted strings into it. The generic version was pulled out of
    the trace_seq() code that was made specifically for tracing.
 
  o The seq_buf code was change to model the seq_file code. I have
    a patch (not included for 3.19) that converts the seq_file.c code
    over to use seq_buf.c like the trace_seq.c code does. This was done
    to make sure that seq_buf.c is compatible with seq_file.c. I may
    try to get that patch in for 3.20.
 
  o The seq_buf.c file was moved to lib/ to remove it from being dependent
    on CONFIG_TRACING.
 
  o The printk() was updated to allow for a per_cpu "override" of
    the internal calls. That is, instead of writing to the console, a call
    to printk() may do something else. This made it easier to allow the
    NMI to change what printk() does in order to call dump_stack() without
    needing to update that code as well.
 
  o Finally, the dump_stack from all CPUs via NMI code was converted to
    use the seq_buf code. The caller to trigger the NMI code would wait
    till all the NMIs finished, and then it would print the seq_buf
    data to the console safely from a non NMI context.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhbrnAAoJEEjnJuOKh9ldsCoIAJ3sKIJ5B3jxJJTCHPAx/lZD
 GVbV1J1mu4kTAZuhJZOAxW8D6PZGZMyEjg0y6ScDEnBGcjAZ9gTiWCdakPktf9EX
 GfaPPqwiL9dZ18J9Qc6uR+7M1Ffpzzwbcc6lJrpoTcjRgkoH9wCiLS9ozFQyYzWb
 /7m5UbUM/PIk9WAjLYXPW6UUVtPTPT0RdEQKofMGTeah+vgqj4TXCOROdlxsXXWF
 77vqBvPd5TUPWFH9ftzJGDtZS8SroXVKCu3fZIqHgzAU0yqwVtH/JzDTy9u2UYhX
 GzDEPeAIdp6m6Uyc406VuIf1QW0gfBgmA0ir80vFoP27uFMM6j5HlF7azgQfx34=
 =YBgA
 -----END PGP SIGNATURE-----

Merge tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull nmi-safe seq_buf printk update from Steven Rostedt:
 "This code is a fork from the trace-3.19 pull as it needed the
  trace_seq clean ups from that branch.

  This code solves the issue of performing stack dumps from NMI context.
  The issue is that printk() is not safe from NMI context as if the NMI
  were to trigger when a printk() was being performed, the NMI could
  deadlock from the printk() internal locks.  This has been seen in
  practice.

  With lots of review from Petr Mladek, this code went through several
  iterations, and we feel that it is now at a point of quality to be
  accepted into mainline.

  Here's what is contained in this patch set:

   - Creates a "seq_buf" generic buffer utility that allows a descriptor
     to be passed around where functions can write their own "printk()"
     formatted strings into it.  The generic version was pulled out of
     the trace_seq() code that was made specifically for tracing.

   - The seq_buf code was change to model the seq_file code.  I have a
     patch (not included for 3.19) that converts the seq_file.c code
     over to use seq_buf.c like the trace_seq.c code does.  This was
     done to make sure that seq_buf.c is compatible with seq_file.c.  I
     may try to get that patch in for 3.20.

   - The seq_buf.c file was moved to lib/ to remove it from being
     dependent on CONFIG_TRACING.

   - The printk() was updated to allow for a per_cpu "override" of the
     internal calls.  That is, instead of writing to the console, a call
     to printk() may do something else.  This made it easier to allow
     the NMI to change what printk() does in order to call dump_stack()
     without needing to update that code as well.

   - Finally, the dump_stack from all CPUs via NMI code was converted to
     use the seq_buf code.  The caller to trigger the NMI code would
     wait till all the NMIs finished, and then it would print the
     seq_buf data to the console safely from a non NMI context

  One added bonus is that this code also makes the NMI dump stack work
  on PREEMPT_RT kernels.  As printk() includes sleeping locks on
  PREEMPT_RT, printk() only writes to console if the console does not
  use any rt_mutex converted spin locks.  Which a lot do"

* tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/nmi: Fix use of unallocated cpumask_var_t
  printk/percpu: Define printk_func when printk is not defined
  x86/nmi: Perform a safe NMI stack trace on all CPUs
  printk: Add per_cpu printk func to allow printk to be diverted
  seq_buf: Move the seq_buf code to lib/
  seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF
  tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions
  tracing: Have seq_buf use full buffer
  seq_buf: Add seq_buf_can_fit() helper function
  tracing: Add paranoid size check in trace_printk_seq()
  tracing: Use trace_seq_used() and seq_buf_used() instead of len
  tracing: Clean up tracing_fill_pipe_page()
  seq_buf: Create seq_buf_used() to find out how much was written
  tracing: Add a seq_buf_clear() helper and clear len and readpos in init
  tracing: Convert seq_buf fields to be like seq_file fields
  tracing: Convert seq_buf_path() to be like seq_path()
  tracing: Create seq_buf layer in trace_seq
2014-12-10 20:35:41 -08:00
Linus Torvalds b6da0076ba Merge branch 'akpm' (patchbomb from Andrew)
Merge first patchbomb from Andrew Morton:
 - a few minor cifs fixes
 - dma-debug upadtes
 - ocfs2
 - slab
 - about half of MM
 - procfs
 - kernel/exit.c
 - panic.c tweaks
 - printk upates
 - lib/ updates
 - checkpatch updates
 - fs/binfmt updates
 - the drivers/rtc tree
 - nilfs
 - kmod fixes
 - more kernel/exit.c
 - various other misc tweaks and fixes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
  exit: pidns: fix/update the comments in zap_pid_ns_processes()
  exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting
  exit: exit_notify: re-use "dead" list to autoreap current
  exit: reparent: call forget_original_parent() under tasklist_lock
  exit: reparent: avoid find_new_reaper() if no children
  exit: reparent: introduce find_alive_thread()
  exit: reparent: introduce find_child_reaper()
  exit: reparent: document the ->has_child_subreaper checks
  exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper()
  exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting
  exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting
  exit: proc: don't try to flush /proc/tgid/task/tgid
  exit: release_task: fix the comment about group leader accounting
  exit: wait: drop tasklist_lock before psig->c* accounting
  exit: wait: don't use zombie->real_parent
  exit: wait: cleanup the ptrace_reparented() checks
  usermodehelper: kill the kmod_thread_locker logic
  usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper()
  fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp
  nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races
  ...
2014-12-10 18:34:42 -08:00
Alex Elder f099755d4c printk: drop logbuf_cpu volatile qualifier
Pranith Kumar posted a patch in which removed the "volatile"
qualifier for the "logbuf_cpu" variable in vprintk_emit().
    https://lkml.org/lkml/2014/11/13/894
In his patch, he used ACCESS_ONCE() for all references to
that symbol to provide whatever protection was intended.

There was some discussion that followed, and in the end Steven Rostedt
concluded that not only was "volatile" not needed, neither was it
required to use ACCESS_ONCE().  I offered an elaborate description that
concluded Steven was right, and Pranith asked me to submit an
alternative patch.  And this is it.

The basic reason "volatile" is not needed is that "logbuf_cpu" has
static storage duration, and vprintk_emit() is an exported
interface.  This means that the value of logbuf_cpu must be read
from memory the first time it is used in a particular call of
vprintk_emit().  The variable's value is read only once in that
function, when it's read it'll be the copy from memory (or cache).

In addition, the value of "logbuf_cpu" is only ever written under
protection of a spinlock.  So the value that is read is the "real"
value (and not an out-of-date cached one).  If its value is not
UINT_MAX, it is the current CPU's processor id, and it will have
been last written by the running CPU.

Signed-off-by: Alex Elder <elder@linaro.org>
Reported-by: Pranith Kumar <bobby.prani@gmail.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:11 -08:00
Joe Perches a39d4a857d printk: add and use LOGLEVEL_<level> defines for KERN_<LEVEL> equivalents
Use #defines instead of magic values.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:11 -08:00
Joe Perches 1dc6244bd6 printk: remove used-once early_vprintk
Eliminate the unlikely possibility of message interleaving for
early_printk/early_vprintk use.

early_vprintk can be done via the %pV extension so remove this
unnecessary function and change early_printk to have the equivalent
vprintk code.

All uses of early_printk already end with a newline so also remove the
unnecessary newline from the early_printk function.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10 17:41:10 -08:00
Steven Rostedt (Red Hat) 04b74b27c2 printk/percpu: Define printk_func when printk is not defined
To avoid include hell, the per_cpu variable printk_func was declared
in percpu.h. But it is only defined if printk is defined.

As users of printk may also use the printk_func variable, it needs to
be defined even if CONFIG_PRINTK is not.

Also add a printk.h include in percpu.h just to be safe.

Link: http://lkml.kernel.org/r/20141121183215.01ba539c@canb.auug.org.au

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-21 11:19:15 -05:00
Steven Rostedt (Red Hat) afdc34a3d3 printk: Add per_cpu printk func to allow printk to be diverted
Being able to divert printk to call another function besides the normal
logging is useful for such things like NMI handling. If some functions
are to be called from NMI that does printk() it is possible to lock up
the box if the nmi handler triggers when another printk is happening.

One example of this use is to perform a stack trace on all CPUs via NMI.
But if the NMI is to do the printk() it can cause the system to lock up.
By allowing the printk to be diverted to another function that can safely
record the printk output and then print it when it in a safe context
then NMIs will be safe to call these functions like show_regs().

Link: http://lkml.kernel.org/p/20140619213952.209176403@goodmis.org

Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 22:01:21 -05:00
Sebastian Schmidt 68c4a4f8ab pstore: Honor dmesg_restrict sysctl on dmesg dumps
When the kernel.dmesg_restrict restriction is in place, only users with
CAP_SYSLOG should be able to access crash dumps (like: attacker is
trying to exploit a bug, watchdog reboots, attacker can happily read
crash dumps and logs).

This puts the restriction on console-* types as well as sensitive
information could have been leaked there.

Other log types are unaffected.

Signed-off-by: Sebastian Schmidt <yath@yath.de>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-11-05 09:59:48 -08:00
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Markus Trippelsdorf 98e35f5894 printk: git rid of [sched_delayed] message for printk_deferred
Commit 458df9fd48 ("printk: remove separate printk_sched buffers and use
printk buf instead") hardcodes printk_deferred() to KERN_WARNING and
inserts the string "[sched_delayed] " before the actual message.  However
it doesn't take into account the KERN_* prefix of the message, that now
ends up in the middle of the output:

 [sched_delayed] ^a4CE: hpet increased min_delta_ns to 20115 nsec

Fix this by just getting rid of the "[sched_delayed] " scnprintf().  The
prefix is useless since 458df9fd48 anyway since from that moment
printk_deferred() inserts the message into the kernel printk buffer
immediately.  So if the message eventually gets printed to console, it is
printed in the correct order with other messages and there's no need for
any special prefix.  And if the kernel crashes before the message makes it
to console, then prefix in the printk buffer doesn't make the situation
any better.

Link: http://lkml.org/lkml/2014/9/14/4

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:13 +02:00
Geert Uytterhoeven 2240a31db6 printk: don't bother using LOG_CPU_MAX_BUF_SHIFT on !SMP
When configuring a uniprocessor kernel, don't bother the user with an
irrelevant LOG_CPU_MAX_BUF_SHIFT question, and don't build the unused
code.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:12 +02:00
Al Viro 849f3127bb switch /dev/kmsg to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-09 02:39:09 -04:00
Patrick Palka 000a7d66ec kernel/printk/printk.c: fix faulty logic in the case of recursive printk
We shouldn't set text_len in the code path that detects printk recursion
because text_len corresponds to the length of the string inside textbuf.
A few lines down from the line

    text_len = strlen(recursion_msg);

is the line

    text_len += vscnprintf(text + text_len, ...);

So if printk detects recursion, it sets text_len to 29 (the length of
recursion_msg) and logs an error.  Then the message supplied by the
caller of printk is stored inside textbuf but offset by 29 bytes.  This
means that the output of the recursive call to printk will contain 29
bytes of garbage in front of it.

This defect is caused by commit 458df9fd48 ("printk: remove separate
printk_sched buffers and use printk buf instead") which turned the line

    text_len = vscnprintf(text, ...);

into

    text_len += vscnprintf(text + text_len, ...);

To fix this, this patch avoids setting text_len when logging the printk
recursion error.  This patch also marks unlikely() the branch leading up
to this code.

Fixes: 458df9fd48 ("printk: remove separate printk_sched buffers and use printk buf instead")
Signed-off-by: Patrick Palka <patrick@parcs.ath.cx>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-10 15:42:12 -07:00
Christoph Lameter bb964a92ce kernel misc: Replace __get_cpu_var uses
Replace uses of __get_cpu_var for address calculation with this_cpu_ptr.

Cc: akpm@linux-foundation.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:44 -04:00
Vasant Hegde 14c4000a88 printk: Add function to return log buffer address and size
Platforms like IBM Power Systems supports service processor
assisted dump. It provides interface to add memory region to
be captured when system is crashed.

During initialization/running we can add kernel memory region
to be collected.

Presently we don't have a way to get the log buffer base address
and size. This patch adds support to return log buffer address
and size.

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2014-08-13 15:13:44 +10:00
Neil Zhang d25d9feced kernel/printk/printk.c: fix bool assignements
Fix coccinelle warnings.

Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Jan Kara 5874af2003 printk: enable interrupts before calling console_trylock_for_printk()
We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()).  However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().

We can lose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock().

We differ from (reverted) commit 939f04bec1 in that we avoid calling
console_unlock() from vprintk_emit() with lockdep enabled as that has
unveiled quite some bugs leading to system freezes during boot (e.g.
  https://lkml.org/lkml/2014/5/30/242,
  https://lkml.org/lkml/2014/6/28/521).

Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Alex Elder 249771b830 printk: miscellaneous cleanups
Some small cleanups to kernel/printk/printk.c.  None of them should
cause any change in behavior.

  - When CONFIG_PRINTK is defined, parenthesize the value of LOG_LINE_MAX.
  - When CONFIG_PRINTK is *not* defined, there is an extra LOG_LINE_MAX
    definition; delete it.
  - Pull an assignment out of a conditional expression in console_setup().
  - Use isdigit() in console_setup() rather than open coding it.
  - In update_console_cmdline(), drop a NUL-termination assignment;
    the strlcpy() call that precedes it guarantees it's not needed.
  - Simplify some logic in printk_timed_ratelimit().

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Alex Elder e99aa46166 printk: use a clever macro
Use the IS_ENABLED() macro rather than #ifdef blocks to set certain
global values.

Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Alex Elder 0b90fec3b9 printk: fix some comments
Fix a few comments that don't accurately describe their corresponding
code.  It also fixes some minor typographical errors.

Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Alex Elder 42a9dc0b3d printk: rename DEFAULT_MESSAGE_LOGLEVEL
Commit a8fe19ebfb ("kernel/printk: use symbolic defines for console
loglevels") makes consistent use of symbolic values for printk() log
levels.

The naming scheme used is different from the one used for
DEFAULT_MESSAGE_LOGLEVEL though.  Change that symbol name to be
MESSAGE_LOGLEVEL_DEFAULT for consistency.  And because the value of that
symbol comes from a similarly-named config option, rename
CONFIG_DEFAULT_MESSAGE_LOGLEVEL as well.

Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jan Kara <jack@suse.cz>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Alex Elder e97e1267e9 printk: tweak do_syslog() to match comments
In do_syslog() there's a path used by kmsg_poll() and kmsg_read() that
only needs to know whether there's any data available to read (and not
its size).  These callers only check for non-zero return.  As a
shortcut, do_syslog() returns the difference between what has been
logged and what has been "seen."

The comments say that the "count of records" should be returned but it's
not.  Instead it returns (log_next_idx - syslog_idx), which is a
difference between buffer offsets--and the result could be negative.

The behavior is the same (it'll be zero or not in the same cases), but
the count of records is more meaningful and it matches what the comments
say.  So change the code to return that.

Signed-off-by: Alex Elder <elder@linaro.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:24 -07:00
Luis R. Rodriguez 23b2899f7f printk: allow increasing the ring buffer depending on the number of CPUs
The default size of the ring buffer is too small for machines with a
large amount of CPUs under heavy load.  What ends up happening when
debugging is the ring buffer overlaps and chews up old messages making
debugging impossible unless the size is passed as a kernel parameter.
An idle system upon boot up will on average spew out only about one or
two extra lines but where this really matters is on heavy load and that
will vary widely depending on the system and environment.

There are mechanisms to help increase the kernel ring buffer for tracing
through debugfs, and those interfaces even allow growing the kernel ring
buffer per CPU.  We also have a static value which can be passed upon
boot.  Relying on debugfs however is not ideal for production, and
relying on the value passed upon bootup is can only used *after* an
issue has creeped up.  Instead of being reactive this adds a proactive
measure which lets you scale the amount of contributions you'd expect to
the kernel ring buffer under load by each CPU in the worst case
scenario.

We use num_possible_cpus() to avoid complexities which could be
introduced by dynamically changing the ring buffer size at run time,
num_possible_cpus() lets us use the upper limit on possible number of
CPUs therefore avoiding having to deal with hotplugging CPUs on and off.
This introduces the kernel configuration option LOG_CPU_MAX_BUF_SHIFT
which is used to specify the maximum amount of contributions to the
kernel ring buffer in the worst case before the kernel ring buffer flips
over, the size is specified as a power of 2.  The total amount of
contributions made by each CPU must be greater than half of the default
kernel ring buffer size (1 << LOG_BUF_SHIFT bytes) in order to trigger
an increase upon bootup.  The kernel ring buffer is increased to the
next power of two that would fit the required minimum kernel ring buffer
size plus the additional CPU contribution.  For example if LOG_BUF_SHIFT
is 18 (256 KB) you'd require at least 128 KB contributions by other CPUs
in order to trigger an increase of the kernel ring buffer.  With a
LOG_CPU_BUF_SHIFT of 12 (4 KB) you'd require at least anything over > 64
possible CPUs to trigger an increase.  If you had 128 possible CPUs the
amount of minimum required kernel ring buffer bumps to:

   ((1 << 18) + ((128 - 1) * (1 << 12))) / 1024 = 764 KB

Since we require the ring buffer to be a power of two the new required
size would be 1024 KB.

This CPU contributions are ignored when the "log_buf_len" kernel
parameter is used as it forces the exact size of the ring buffer to an
expected power of two value.

[pmladek@suse.cz: fix build]
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Davidlohr Bueso <davidlohr@hp.com>
Tested-by: Petr Mladek <pmladek@suse.cz>
Reviewed-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:23 -07:00
Luis R. Rodriguez f54051722e printk: make dynamic units clear for the kernel ring buffer
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Suggested-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:23 -07:00
Luis R. Rodriguez c0a318a361 printk: move power of 2 practice of ring buffer size to a helper
In practice the power of 2 practice of the size of the kernel ring
buffer remains purely historical but not a requirement, specially now
that we have LOG_ALIGN and use it for both static and dynamic
allocations.  It could have helped with implicit alignment back in the
days given the even the dynamically sized ring buffer was guaranteed to
be aligned so long as CONFIG_LOG_BUF_SHIFT was set to produce a
__LOG_BUF_LEN which is architecture aligned, since log_buf_len=n would
be allowed only if it was > __LOG_BUF_LEN and we always ended up
rounding the log_buf_len=n to the next power of 2 with
roundup_pow_of_two(), any multiple of 2 then should be also architecture
aligned.  These assumptions of course relied heavily on
CONFIG_LOG_BUF_SHIFT producing an aligned value but users can always
change this.

We now have precise alignment requirements set for the log buffer size
for both static and dynamic allocations, but lets upkeep the old
practice of using powers of 2 for its size to help with easy expected
scalable values and the allocators for dynamic allocations.  We'll reuse
this later so move this into a helper.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:23 -07:00
Luis R. Rodriguez 7030017752 printk: make dynamic kernel ring buffer alignment explicit
We have to consider alignment for the ring buffer both for the default
static size, and then also for when an dynamic allocation is made when
the log_buf_len=n kernel parameter is passed to set the size
specifically to a size larger than the default size set by the
architecture through CONFIG_LOG_BUF_SHIFT.

The default static kernel ring buffer can be aligned properly if
architectures set CONFIG_LOG_BUF_SHIFT properly, we provide ranges for
the size though so even if CONFIG_LOG_BUF_SHIFT has a sensible aligned
value it can be reduced to a non aligned value.  Commit 6ebb017de9
("printk: Fix alignment of buf causing crash on ARM EABI") by Andrew
Lunn ensures the static buffer is always aligned and the decision of
alignment is done by the compiler by using __alignof__(struct log).

When log_buf_len=n is used we allocate the ring buffer dynamically.
Dynamic allocation varies, for the early allocation called before
setup_arch() memblock_virt_alloc() requests a page aligment and for the
default kernel allocation memblock_virt_alloc_nopanic() requests no
special alignment, which in turn ends up aligning the allocation to
SMP_CACHE_BYTES, which is L1 cache aligned.

Since we already have the required alignment for the kernel ring buffer
though we can do better and request explicit alignment for LOG_ALIGN.
This does that to be safe and make dynamic allocation alignment
explicit.

Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Tested-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Petr Mladek <pmladek@suse.cz>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Arun KS <arunks.linux@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:23 -07:00
Andrew Morton d18bbc215f kernel/printk/printk.c: revert "printk: enable interrupts before calling console_trylock_for_printk()"
Revert commit 939f04bec1 ("printk: enable interrupts before calling
console_trylock_for_printk()").

Andreas reported:

: None of the post 3.15 kernel boot for me. They all hang at the GRUB
: screen telling me it loaded and started the kernel, but the kernel
: itself stops before it prints anything (or even replaces the GRUB
: background graphics).

939f04bec1 is modest latency reduction.  Revert it until we understand
the reason for these failures.

Reported-by: Andreas Bombe <aeb@debian.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-03 09:21:54 -07:00
Borislav Petkov a8fe19ebfb kernel/printk: use symbolic defines for console loglevels
... instead of naked numbers.

Stuff in sysrq.c used to set it to 8 which is supposed to mean above
default level so set it to DEBUG instead as we're terminating/killing all
tasks and we want to be verbose there.

Also, correct the check in x86_64_start_kernel which should be >= as
we're clearly issuing the string there for all debug levels, not only
the magical 10.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Will Deacon 84b5ec8a9d printk: report dropping of messages from logbuf
If the log ring buffer becomes full, we silently overwrite old messages
with new data.  console_unlock will detect this case and fast-forward the
console_* pointers to skip over the corrupted data, but nothing will be
reported to the user.

This patch hijacks the first valid log message after detecting that we
dropped messages and prefixes it with a note detailing how many messages
were dropped.  For long (~1000 char) messages, this will result in some
truncation of the real message, but given that we're dropping things
anyway, that doesn't seem to be the end of the world.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
John Stultz aac74dc495 printk: rename printk_sched to printk_deferred
After learning we'll need some sort of deferred printk functionality in
the timekeeping core, Peter suggested we rename the printk_sched function
so it can be reused by needed subsystems.

This only changes the function name. No logic changes.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
John Stultz 8195460626 printk: disable preemption for printk_sched
An earlier change in -mm (printk: remove separate printk_sched
buffers...), removed the printk_sched irqsave/restore lines since it was
safe for current users.  Since we may be expanding usage of
printk_sched(), disable preepmtion for this function to make it more
generally safe to call.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Steven Rostedt 458df9fd48 printk: remove separate printk_sched buffers and use printk buf instead
To prevent deadlocks with doing a printk inside the scheduler,
printk_sched() was created.  The issue is that printk has a console_sem
that it can grab and release.  The release does a wake up if there's a
task pending on the sem, and this wake up grabs the rq locks that is
held in the scheduler.  This leads to a possible deadlock if the wake up
uses the same rq as the one with the rq lock held already.

What printk_sched() does is to save the printk write in a per cpu buffer
and sets the PRINTK_PENDING_SCHED flag.  On a timer tick, if this flag is
set, the printk() is done against the buffer.

There's a couple of issues with this approach.

1) If two printk_sched()s are called before the tick, the second one
   will overwrite the first one.

2) The temporary buffer is 512 bytes and is per cpu.  This is a quite a
   bit of space wasted for something that is seldom used.

In order to remove this, the printk_sched() can use the printk buffer
instead, and delay the console_trylock()/console_unlock() to the queued
work.

Because printk_sched() would then be taking the logbuf_lock, the
logbuf_lock must not be held while doing anything that may call into the
scheduler functions, which includes wake ups.  Unfortunately, printk()
also has a console_sem that it uses, and on release, the up(&console_sem)
may do a wake up of any pending waiters.  This must be avoided while
holding the logbuf_lock.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Jan Kara 939f04bec1 printk: enable interrupts before calling console_trylock_for_printk()
We need interrupts disabled when calling console_trylock_for_printk()
only so that cpu id we pass to can_use_console() remains valid (for
other things console_sem provides all the exclusion we need and
deadlocks on console_sem due to interrupts are impossible because we use
down_trylock()).  However if we are rescheduled, we are guaranteed to
run on an online cpu so we can easily just get the cpu id in
can_use_console().

We can lose a bit of performance when we enable interrupts in
vprintk_emit() and then disable them again in console_unlock() but OTOH
it can somewhat reduce interrupt latency caused by console_unlock()
especially since later in the patch series we will want to spin on
console_sem in console_trylock_for_printk().

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:17 -07:00
Jan Kara bd8d7cf5b8 printk: fix lockdep instrumentation of console_sem
Printk calls mutex_acquire() / mutex_release() by hand to instrument
lockdep about console_sem.  However in some corner cases the
instrumentation is missing.  Fix the problem by creating helper functions
for locking / unlocking console_sem which take care of lockdep
instrumentation as well.

Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Fabio Estevam <festevam@gmail.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:16 -07:00
Jan Kara 608873cacb printk: release lockbuf_lock before calling console_trylock_for_printk()
There's no reason to hold lockbuf_lock when entering
console_trylock_for_printk().

The first thing this function does is to call down_trylock(console_sem)
and if that fails it immediately unlocks lockbuf_lock.  So lockbuf_lock
isn't needed for that branch.  When down_trylock() succeeds, the rest of
console_trylock() is OK without lockbuf_lock (it is called without it
from other places), and the only remaining thing in
console_trylock_for_printk() is can_use_console() call.  For that call
console_sem is enough (it iterates all consoles and checks CON_ANYTIME
flag).

So we drop logbuf_lock before entering console_trylock_for_printk() which
simplifies the code.

[akpm@linux-foundation.org: fix have_callable_console() comment]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:16 -07:00
Jan Kara ca1d432ad8 printk: remove outdated comment
Comment about interesting interlocking between lockbuf_lock and
console_sem is outdated.

It was added in 2002 by commit a880f45a48be during conversion of
console_lock to console_sem + lockbuf_lock.

At that time release_console_sem() (today's equivalent is
console_unlock()) was indeed using lockbuf_lock to avoid races between
trylock on console_sem in printk() and unlock of console_sem.  However
these days the interlocking is gone and the races are avoided by
rechecking logbuf state after releasing console_sem.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:16 -07:00
Petr Mladek 034633ccb2 printk: return really stored message length
I wonder if anyone uses printk return value but it is there and should be
counted correctly.

This patch modifies log_store() to return the number of really stored
bytes from the 'text' part.  Also it handles the return value in
vprintk_emit().

Note that log_store() is used also in cont_flush() but we could ignore the
return value there.  The function works with characters that were already
counted earlier.  In addition, the store could newer fail here because the
length of the printed text is limited by the "cont" buffer and "dict" is
NULL.

Signed-off-by: Petr Mladek <pmladek@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:16 -07:00