Some platforms do not have virt_to_bus(), so properly depend on
CONFIG_VIRT_TO_BUS for the Comedi drivers that need this function.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On architectures that don't define PAGE_KERNEL_NOCACHE, the Comedi driver turns
into tragedy:
CC [M] drivers/staging/comedi/drivers.o
drivers/staging/comedi/drivers.c: In function ‘comedi_buf_alloc’:
drivers/staging/comedi/drivers.c:505:41: error: ‘PAGE_KERNEL_NOCACHE’ undeclared (first use in this function)
drivers/staging/comedi/drivers.c:505:41: note: each undeclared identifier is rep orted only once for each function it appears in
make[3]: *** [drivers/staging/comedi/drivers.o] Error 1
Restrict the driver to only those architectures that define PAGE_KERNEL_NOCACHE.
PAGE_KERNEL_NOCACHE is a kludge - some system architectures such as SGI IP27
are even uable to offer uncached operation - at least in the way an unwitting
driver might assume. I haven't looked in details how the driver is using
the area vmaped with PAGE_KERNEL_NOCACHE but maybe doing it XFS-style using
cached memory and the flush_kernel_vmap_range / invalidate_kernel_vmap_range
APIs in conjunction with the DMA API is a practical alternative.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: David Miller <davem@davemloft.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: Make struct pcmcia_device_id const, sound drivers edition
staging: pcmcia: Convert pcmcia_device_id declarations to const
pcmcia: Convert pcmcia_device_id declarations to const
pcmcia: Make declaration and uses of struct pcmcia_device_id const
pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
Add support for automatically associating a vmk8055 device with a
comedi device (previously the user had to use comedi_num_legacy_minors
to reserve device slots and then associate them with vmk8055 devices
using comedi_config).
Tested on multiple K8055s, but not on K8061s.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Calling comedi_dio_bifield2() returns EBUSY permanently. Implementing
the insn_bits call fixes the problem and is good in its own right since
one can then read and write to all the digitial lines at the same time.
Tested on a K8055, but not on a K8061.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rudimentary_check() can currently check whether the input or
output direction is currently available (no pending transaction),
but not both at the same time. We need this facility for do_bits().
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vmk80xx_di_rinsn() and vmk80xx_do_rinsn() extract the required channel
data by inconsistent and overly-complex algorithms. Simplify them both.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Digitial input and output sub-devices were reporting a maxdata of
0x1F and 0xFF respectively. They should both be 1.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rudimentary_check is a macro with side-effects (it returns
on error) which is contary to CodingStyle. Replace it with
a static function.
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ps_BoardInfo pointer in the device private data is redundant as we
can just use the this_board macro to access the same data, as is done
elsewhere in the code. Get rid of the pointer and change the code to
use the this_board macro instead.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The drivers for ADDI-DATA cards can override some static parameters for
the board type using information read from EEPROM. Unfortunately, they
currently write the parameters from the EEPROM back to the shared,
read-only board data! The problem has been masked during compilation by
type-casting away the const-ness of the data.
This patch changes the code to use an area in the private data for the
board instance to hold the parameters read from EEPROM (after
initializing the parameters from the static board data). It also
changes the type-casts to the read-only data to preserve the const
qualifier.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Advantech PCI-1751 has a 8254 counter chip on board. Add it to the
device as a counter subdevice. Apparently the counter can generate
interrupts although the driver does not currently use this capability.
Original patch by Ivan Russkih (Иван Русских) <vanekrus at gmail dot
com>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Style improvements to comedi driver vmk80xx:
* One variable definition per line
* Block quotes start and end with near-empty lines
* If..else statements use braces for both branches
* Egregious blank lines removed
* Use if..else rather than goto where trivial
* Don't put function return type on a separate line
Signed-off-by: J. Ali Harlow <ali@avrc.city.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the jr3_pci.c file that fixes up a brace warning
found by the checkpatch.pl tool
Signed-off-by: Stephane Pajot <pajot.stephane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Done via perl script:
$ cat remove_semi_switch.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces = qr/(\{(?:[^\{\}]++|(?-1))*\})/;
foreach my $file (@ARGV) {
my $f;
my $text;
my $oldtext;
next if ((-d $file));
open($f, '<', $file)
or die "$P: Can't open $file for read\n";
$oldtext = do { local($/) ; <$f> };
close($f);
next if ($oldtext eq "");
$text = $oldtext;
my $count = 0;
do {
$count = 0;
$count += $text =~ s@\b(switch\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
} while ($count > 0);
if ($text ne $oldtext) {
my $newfile = $file;
open($f, '>', $newfile)
or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
}
}
$
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Done via perl script:
$ cat remove_semi_for.pl
my $match_balanced_parentheses = qr/(\((?:[^\(\)]++|(?-1))*\))/;
my $match_balanced_braces = qr/(\{(?:[^\{\}]++|(?-1))*\})/;
foreach my $file (@ARGV) {
my $f;
my $text;
my $oldtext;
next if ((-d $file));
open($f, '<', $file)
or die "$P: Can't open $file for read\n";
$oldtext = do { local($/) ; <$f> };
close($f);
next if ($oldtext eq "");
$text = $oldtext;
my $count = 0;
do {
$count = 0;
$count += $text =~ s@\b(for\s*${match_balanced_parentheses}\s*)${match_balanced_braces}\s*;@"$1$3"@egx;
} while ($count > 0);
if ($text ne $oldtext) {
my $newfile = $file;
open($f, '>', $newfile)
or die "$P: Can't open $newfile for write\n";
print $f $text;
close($f);
}
}
$
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
My script that finds typos always wants to do s/Funktion/Function/.
Instead of adding some whilelist logic to my script just delete the
changelog that is useless in general and still more in this case as most
kernel developers don't understand it.
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch was generated by the following semantic patch:
// <smpl>
@@ expression E; @@
- if (E != NULL) { kfree(E); }
+ kfree(E);
@@ expression E; @@
- if (E != NULL) { kfree(E); E = NULL; }
+ kfree(E);
+ E = NULL;
// </smpl>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch below removes an extra "l" in the word.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch below removes an extra "l" in the word.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is to resolve a merge conflict with:
drivers/staging/zram/zram_drv.c
as pointed out by Stephen Rothwell
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ni_tio and ni_tio modules do not depend on the 8255 module, but the
ni_atmio, ni_mio_cs and ni_pcimio modules do need the 8255 module. The
ni_pcimio module also needs the comedi_fc module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As mentioned by W. Trevor King on the devel@linuxdriverproject.org list
on "Thu, 27 Jan 2011 18:52:15 -0500", "Message-ID:
<20110127235214.GA5107@thialfi.dhcp.drexel.edu>", the ni_pcimio module
is missing module metadata, including a license.
This patch adds module metadata to all the NI comedi driver modules. It
also removes a duplicate MODULE_LICENSE("GPL") line from the "mite"
module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: W. Trevor King <wking@drexel.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the drivers.c file that fixes up a
braces around single statement warning found by the
checkpatch.pl tool
Signed-off-by: Micha Hergarden <micha.hergarden@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was done to resolve conflicts in the following files due
to patches in Linus's tree and in the staging-next tree:
drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the checkpatch errors listed below:
ERROR: code indent should use tabs where possible
WARNING: space prohibited between function name and open parenthesis '('
WARNING: please, no spaces at the start of a line
WARNING: braces {} are not necessary for single statement blocks
WARNING: printk() should include KERN_ facility level
Signed-off-by: Nick Robinson <nr33@msstate.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Most comedi hardware drivers that support the INSN_BITS instruction
ignore the base channel (specified by insn->chanspec) and assume it is
0. The base channel is supposed to affect how the mask (in data[0]) and
bits (in data[1]) are treated. Bit 0 applies to the base channel, bit 1
applies to base channel plus 1, etc.
For subdevices with no more than 32 channels, this patch modifies the
chanspec and data before presenting it to the hardware driver, and
modifies the data bits read back by the hardware driver (into data[1]).
This makes it appear to the hardware driver that the base channel was
set to 0.
For subdevices with more than 32 channels, the instruction is left
unmodified, as it is assumed that the hardware driver takes note of the
base channel in this case in order to provide access beyond channel 31.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the sparse warnings
"obsolete struct initializer, use C99 syntax" in icp_multi.c
by converting the struct to C99 syntax
KernelVersion: linux-next-20110110
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the sparse warnings in me4000.c:
me4000.c:122:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:123:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:124:1: warning: obsolete struct initializer, use C99 syntax
me4000.c:125:1: warning: obsolete struct initializer, use C99 syntax
by converting the struct to use C99 syntax
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch allows the possibility to choose between edgre triggering
and level trigerring, for the analog input, on the Measurement
Computing PCI-DAS* boards
Signed-off-by: Brice Dubost <braice@braice.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The ni_labpc driver module only requests a shared IRQ for PCI devices,
requesting a non-shared IRQ for non-PCI devices.
As this module is also used by the ni_labpc_cs module for certain
National Instruments PCMCIA cards, it also needs to request a shared IRQ
for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus
controller.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the following issues in s526.c:
WARNING: printk() should include KERN_ facility level
WARNING: line over 80 characters
ERROR: do not use C99 // comments
WARNING: space prohibited between function name and open parenthesis '('
WARNING: braces {} are not necessary for any arm of this statement
WARNING: suspect code indent for conditional statements (16, 16)
Signed-off-by: Xenofon Foukas <foukas.xenofon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the following issues in file ii_pci20kc.c:
WARNING: please, no space before tabs
WARNING: unnecessary whitespace before a quoted newline
WARNING: line over 80 characters
Signed-off-by: Xenofon Foukas <foukas.xenofon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the following issues in ni_tiocmd.c:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: braces {} are not necessary for single statement blocks
WARNING: printk() should include KERN_ facility level
WARNING: line over 80 characters
__func__ should be used instead of gcc specific __FUNCTION__
ERROR: that open brace { should be on the previous line
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
Signed-off-by: Xenofon Foukas <foukas.xenofon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes line over 80 characters warning issues found
in file drivers.c
Signed-off-by: Xenofon Foukas <foukas.xenofon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was done to handle a number of conflicts in the batman-adv
and winbond drivers properly. It also now allows us to fix up the sysfs
attributes properly that were not in the .37 release due to them being
only in this tree at the time.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix typo in error message of dux commands allocation.
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixup the last remaining users of DECLARE_MUTEX and init_MUTEX.
Scripted conversion, resulting code is binary equivalent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
LKML-Reference: <20100907125057.278833764@linutronix.de>
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: fix ni_daq_700 compilation
pcmcia: IOCARD is also required for using IRQs
Greg Kroah-Hartman