When the ioctl interface for the write commands was introduced it did
not mark the core response with UVERBS_ATTR_F_VALID_OUTPUT. This causes
rdma-core in userspace to not mark the buffers as written for valgrind.
Along the same lines it turns out we have always missed marking the driver
data. Fixing both of these makes valgrind work properly with rdma-core and
ioctl.
Fixes: 4785860e04 ("RDMA/uverbs: Implement an ioctl that can call write and write_ex handlers")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Introduce and use rdma_device_to_ibdev() API for those drivers which are
registering one sysfs group and also use in ib_core.
In subsequent patch, device->provider_ibdev one-to-one mapping is no
longer holds true during accessing sysfs entries.
Therefore, introduce an API rdma_device_to_ibdev() that provides such
information.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Most provider routines are callback routines which ib core invokes.
_callback suffix doesn't convey information about when such callback is
invoked. Therefore, rename port_callback to init_port.
Additionally, store the init_port function pointer in ib_device_ops, so
that it can be accessed in subsequent patches when binding rdma device to
net namespace.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CTX objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that CQ objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
As part of an audit process to update drivers to use rdma_restrack_add()
ensure that PD objects is cleared before access.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is QEDR_ROCE_PKEY_TABLE_LEN, index should be tested
for >= QEDR_ROCE_PKEY_TABLE_LEN instead of > QEDR_ROCE_PKEY_TABLE_LEN.
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The pkey table size is one element, index should be tested for > 0 instead
of > 1.
Fixes: e3cf00d0a8 ("IB/usnic: Add Cisco VIC low-level hardware driver")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umem_get() can only be called in a method callback, which always has a
udata parameter. This allows ib_umem_get() to derive the ucontext pointer
directly from the udata without requiring the drivers to find it in some
way or another.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
The next patch will add dependency from ib_umem_get in to ib_uverbs so
move the required ib_umem_xxx functionality to it's correct module -
ib_uverbs - and avoid circular dependecy from the form of ib_core ->
ib_uverbs -> ib_core in depmod.
Since this now requires all drivers to be build modular if uverbs is
modular, hoist the test a couple drivers had into the main kconfig and
apply it to all drivers uniformly.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the IB_WR_REG_MR opcode value changed, let's set the PVRDMA device
opcodes explicitly.
Reported-by: Ruishuang Wang <ruishuangw@vmware.com>
Fixes: 9a59739bd0 ("IB/rxe: Revise the ib_wr_opcode enum")
Cc: stable@vger.kernel.org
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Ruishuang Wang <ruishuangw@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A recent regression causes a null ptr crash when dumping cm_id resources.
The cma is incorrectly adding all cm_id restrack resources as kernel mode.
Fixes: af8d70375d ("RDMA/restrack: Resource-tracker should not use uobject pointers")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Convert various places to more readable code, which embeds
CONFIG_INFINIBAND_ON_DEMAND_PAGING into the code flow.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Consolidate various checks if MR is ODP backed to one simple helper and
update call sites to use it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Device capability bits are exposing what specific device supports from HW
perspective. Those bits are not dependent on kernel configurations and
RDMA/core should ensure that proper interfaces to users will be disabled
if CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set.
Fixes: f4056bfd8c ("IB/core: Add on demand paging caps to ib_uverbs_ex_query_device")
Fixes: 8cdd312cfe ("IB/mlx5: Implement the ODP capability query verb")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
CONFIG_INFINIBAND_ON_DEMAND_PAGING is used in general structures to
micro-optimize the memory footprint. Remove it, so it will allow us to
simplify various ODP device flows.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Unsafe global rkey is considered dangerous because it exposes memory
registered for all memory in the system. Only users with a QP on the same
PD can use the rkey, and generally those QPs will already know the
value. However, out of caution, do not expose the value to unprivleged
users on the local system. Require CAP_NET_ADMIN instead.
Cc: <stable@vger.kernel.org> # 4.16
Fixes: 29cf1351d4 ("RDMA/nldev: provide detailed PD information")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Modify the pbl ba page size to 16K for in order to support 4G MR size.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
According to IB protocol, local ACK timeout shall be a 5 bit
value. Currently, hip08 could not support the possible max value 31. Fail
the request in this case.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some application scenario, the user could not have receive queue when
run rdma write or read operation.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When flush cqe with srq, the driver disable to update the rq head pointer
into the hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Inorder to optimize the NVMEoF read IOPs, iw_cxgb4 posts a FW Write with
Completion WQE that combines an RDMA Write WR and the subsequent RDMA Send
with Invalidate WR.
This patch is an extension to it, where it posts a Write with completion
for RDMA WRITE WR + RDMA SEND WR combination as well.
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If get QP object fails 'ret' must be assigned with a proper error code.
Fixes: 9a0738575f ("RDMA/uverbs: Use uverbs_response() for remaining response copying")
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop series
-----BEGIN PGP SIGNATURE-----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=REsM
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Over the break a few defects were found, so this is a -rc style pull
request of various small things that have been posted.
- An attempt to shorten RCU grace period driven delays showed crashes
during heavier testing, and has been entirely reverted
- A missed merge/rebase error between the advise_mr and ib_device_ops
series
- Some small static analysis driven fixes from Julia and Aditya
- Missed ability to create a XRC_INI in the devx verbs interop
series"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
infiniband/qedr: Potential null ptr dereference of qp
infiniband: bnxt_re: qplib: Check the return value of send_message
IB/ipoib: drop useless LIST_HEAD
IB/core: Add advise_mr to the list of known ops
Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads"
IB/mlx5: Allow XRC INI usage via verbs in DEVX context
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_find() may fail and return a NULL pointer. The fix checks the return
value of the function and returns an error in case of NULL.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.
Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Drop LIST_HEAD where the variable it declares is never used.
Commit 31c02e2157 ("IPoIB: Avoid using stale last_send counter
when reaping AHs") removed the uses, but not the declaration.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Fixes: 31c02e2157 ("IPoIB: Avoid using stale last_send counter when reaping AHs")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We need to add advise_mr to the list of operation setters on the ib_device
or otherwise callers to ib_set_device_ops() for advise_mr operation will
not have their callback registered.
When the advise_mr series was merged with the device ops series the
SET_DEVICE_OPS() was missed.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().
This reverts commit bb7e22a8ab.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From device point of view both XRC target and initiator are XRC transport
type.
Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.
Fixes: 5aa3771ded ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting to
get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5,
qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use write()
for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into
a big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and sysfs
files
- First steps toward removing 'uobject' from the view of the drivers
-----BEGIN PGP SIGNATURE-----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=T0p1
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a fairly typical cycle, with the usual sorts of driver
updates. Several series continue to come through which improve and
modernize various parts of the core code, and we finally are starting
to get the uAPI command interface cleaned up.
- Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4,
mlx5, qib, rxe, usnic
- Rework the entire syscall flow for uverbs to be able to run over
ioctl(). Finally getting past the historic bad choice to use
write() for command execution
- More functional coverage with the mlx5 'devx' user API
- Start of the HFI1 series for 'TID RDMA'
- SRQ support in the hns driver
- Support for new IBTA defined 2x lane widths
- A big series to consolidate all the driver function pointers into a
big struct and have drivers provide a 'static const' version of the
struct instead of open coding initialization
- New 'advise_mr' uAPI to control device caching/loading of page
tables
- Support for inline data in SRPT
- Modernize how umad uses the driver core and creates cdev's and
sysfs files
- First steps toward removing 'uobject' from the view of the drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits)
RDMA/srpt: Use kmem_cache_free() instead of kfree()
RDMA/mlx5: Signedness bug in UVERBS_HANDLER()
IB/uverbs: Signedness bug in UVERBS_HANDLER()
IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported
IB/umad: Start using dev_groups of class
IB/umad: Use class_groups and let core create class file
IB/umad: Refactor code to use cdev_device_add()
IB/umad: Avoid destroying device while it is accessed
IB/umad: Simplify and avoid dynamic allocation of class
IB/mlx5: Fix wrong error unwind
IB/mlx4: Remove set but not used variable 'pd'
RDMA/iwcm: Don't copy past the end of dev_name() string
IB/mlx5: Fix long EEH recover time with NVMe offloads
IB/mlx5: Simplify netdev unbinding
IB/core: Move query port to ioctl
RDMA/nldev: Expose port_cap_flags2
IB/core: uverbs copy to struct or zero helper
IB/rxe: Reuse code which sets port state
IB/rxe: Make counters thread safe
IB/mlx5: Use the correct commands for UMEM and UCTX allocation
...
This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas. Additionally, we have
a pile of annotation, unused variable and minor updates. The big API
change is the updates for Christoph's DMA rework which include
removing the DISABLE_CLUSTERING flag. And finally there are a couple
of target tree updates.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXCEUNiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdjKAP9vrTTv
qFaYmAoRSbPq9ZiixaXLMy0K/6o76Uay0gnBqgD/fgn3jg/KQ6alNaCjmfeV3wAj
u1j3H7tha9j1it+4pUw=
=GDa+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: smarpqi, lpfc, qedi,
megaraid_sas, libsas, zfcp, mpt3sas, hisi_sas.
Additionally, we have a pile of annotation, unused variable and minor
updates.
The big API change is the updates for Christoph's DMA rework which
include removing the DISABLE_CLUSTERING flag.
And finally there are a couple of target tree updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (259 commits)
scsi: isci: request: mark expected switch fall-through
scsi: isci: remote_node_context: mark expected switch fall-throughs
scsi: isci: remote_device: Mark expected switch fall-throughs
scsi: isci: phy: Mark expected switch fall-through
scsi: iscsi: Capture iscsi debug messages using tracepoints
scsi: myrb: Mark expected switch fall-throughs
scsi: megaraid: fix out-of-bound array accesses
scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through
scsi: fcoe: remove set but not used variable 'port'
scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()
scsi: smartpqi: fix build warnings
scsi: smartpqi: update driver version
scsi: smartpqi: add ofa support
scsi: smartpqi: increase fw status register read timeout
scsi: smartpqi: bump driver version
scsi: smartpqi: add smp_utils support
scsi: smartpqi: correct lun reset issues
scsi: smartpqi: correct volume status
scsi: smartpqi: do not offline disks for transient did no connect conditions
scsi: smartpqi: allow for larger raid maps
...
Patch series "mmu notifier contextual informations", v2.
This patchset adds contextual information, why an invalidation is
happening, to mmu notifier callback. This is necessary for user of mmu
notifier that wish to maintains their own data structure without having to
add new fields to struct vm_area_struct (vma).
For instance device can have they own page table that mirror the process
address space. When a vma is unmap (munmap() syscall) the device driver
can free the device page table for the range.
Today we do not have any information on why a mmu notifier call back is
happening and thus device driver have to assume that it is always an
munmap(). This is inefficient at it means that it needs to re-allocate
device page table on next page fault and rebuild the whole device driver
data structure for the range.
Other use case beside munmap() also exist, for instance it is pointless
for device driver to invalidate the device page table when the
invalidation is for the soft dirtyness tracking. Or device driver can
optimize away mprotect() that change the page table permission access for
the range.
This patchset enables all this optimizations for device drivers. I do not
include any of those in this series but another patchset I am posting will
leverage this.
The patchset is pretty simple from a code point of view. The first two
patches consolidate all mmu notifier arguments into a struct so that it is
easier to add/change arguments. The last patch adds the contextual
information (munmap, protection, soft dirty, clear, ...).
This patch (of 3):
To avoid having to change many callback definition everytime we want to
add a parameter use a structure to group all parameters for the
mmu_notifier invalidate_range_start/end callback. No functional changes
with this patch.
[akpm@linux-foundation.org: fix drivers/gpu/drm/amd/amdgpu/amdgpu_mn.c kerneldoc]
Link: http://lkml.kernel.org/r/20181205053628.3210-2-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Jason Gunthorpe <jgg@mellanox.com> [infiniband]
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Fixes: 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "num_actions" variable needs to be signed for the error handling to
work. The maximum number of actions is less than 256 so int type is large
enough for that.
Fixes: cbfdd442c4 ("IB/uverbs: Add helper to get array size from ptr attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The "num_sge" variable needs to be signed for the error handling to work.
The uverbs_attr_ptr_get_array_size() returns int so this change is safe.
Fixes: ad8a449675 ("IB/uverbs: Add support to advise_mr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The per-port Q counter is some kernel resource and as such may be used by
few UID(s) upon DEVX usage.
To enable using it for QP/RQ when DEVX context is used need to allocate it
with a sharing mode indication to let firmware allows its usage.
The UID = 0xffff was chosen to mark it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Start using core defined dev_groups of a class which allows to add device
attributes to the core kernel and simplify the umad module.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use class->class_groups core kernel facility to create the abi version
file instead of open coding.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Refactor code to use cdev_device_add() and do other minor refactors while
modifying these functions as below.
1. Instead of returning generic -1, return an actual error for
ib_umad_init_port().
2. Introduce and use ib_umad_init_port_dev() for sm and umad char devices.
3. Instead of kobj, use more light weight kref to refcount ib_umad_device.
4. Use modern cdev_device_add() single code cut down three steps of
cdev_add(), device_create(). This further helps to move device sysfs
files to class attributes in subsequent patch.
5. Remove few empty lines while refactoring these functions.
6. Use sizeof() instead of sizeof to avoid checkpatch warning.
7. Use struct_size() for calculation of ib_umad_port.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_umad_reg_agent2() and ib_umad_reg_agent() access the device name in
dev_notice(), while concurrently, ib_umad_kill_port() can destroy the
device using device_destroy().
cpu-0 cpu-1
----- -----
ib_umad_ioctl()
[...] ib_umad_kill_port()
device_destroy(dev)
ib_umad_reg_agent()
dev_notice(dev)
Therefore, first mark ib_dev as NULL, to block any further access in file
ops, unregister the mad agent and destroy the device at the end after
mutex is unlocked.
This ensures that device doesn't get destroyed, while it may get accessed.
Fixes: 0f29b46d49 ("IB/mad: add new ioctl to ABI to support new registration options")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Simplify code to have a static structure instance for umad class
allocation.
This will allow to have class attributes defined along with class
registration in subsequent patch and allows more class methods definition
similar to ib_core module.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The destroy_workqueue on error unwind is missing, and the code jumps to
the wrong exit label.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp':
drivers/infiniband/hw/mlx4/qp.c:1612:22: warning:
variable 'pd' set but not used [-Wunused-but-set-variable]
Fixes: e00b64f7c5 ("RDMA: Cleanup undesired pd->uobject usage")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We now use dev_name(&ib_device->dev) instead of ib_device->name in iwpm
messages. The name field in struct device is a const char *, where as
ib_device->name is a char array of size IB_DEVICE_NAME_MAX, and it is
pre-initialized to zeros.
Since iw_cm_map() was using memcpy() to copy in the device name, and
copying IWPM_DEVNAME_SIZE bytes, it ends up copying past the end of the
source device name string and copying random bytes. This results in iwpmd
failing the REGISTER_PID request from iwcm. Thus port mapping is broken.
Validate the device and if names, and use strncpy() to inialize the entire
message field.
Fixes: 896de0090a ("RDMA/core: Use dev_name instead of ibdev->name")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
On NVMe offloads connection with many IO queues, EEH takes long time to
recover. The culprit is the synchronize_srcu in the destroy_mkey. The
solution is to use synchronize_srcu only for ODP mkey.
Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When dealing with netdev unregister events, we just need to know that this
is our currently bounded netdev. There's no need to do any further
checks/queries.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a method for query port under the uverbs global methods. Current
ib_port_attr struct is passed as a single attribute and port_cap_flags2 is
added as a new attribute to the function.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
port_cap_flags2 represents IBTA PortInfo:CapabilityMask2.
The field safely extends the RDMA_NLDEV_ATTR_CAP_FLAGS operand as it was
exported as 64 bit to allow this kind of extension.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a helper to zero fill fields before copying data to
UVERBS_ATTR_STRUCT.
As UVERBS_ATTR_STRUCT can be used as an extensible struct, we want to make
sure that if the user supplies us with a struct that has new fields that
we are not aware of, we return them zeroed to the user.
This helper should be used when using UVERBS_ATTR_STRUCT for an extendable
data structure and there is a need to make sure that extended members of
the struct, that the kernel doesn't handle, are returned zeroed to the
user. This is needed due to the fact that UVERBS_ATTR_STRUCT allows
non-zero values for members after 'last' member.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Same code is executed in both rxe_param_set_add and rxe_notify functions.
Make one function and call it from both places.
Since both callers already have a rxe object use it directly instead of
deriving it from the net device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current rxe device counters are not thread safe.
When multiple QPs are used, they can be racy.
Make them thread safe by making it atomic64.
Fixes: 0b1e5b99a4 ("IB/rxe: Add port protocol stats")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
During testing the command format was changed to close a security
hole. Revise the driver to use the command format that will actually be
supported in GA firmware.
Both the UMEM and UCTX are intended only for use by the kernel and cannot
be executed using a general command.
Since the UMEM and CTX are not part of the general object the caps bits
were moved to be some log_xxx location in the general HCA caps.
The firmware code was adapted as well to match the above.
Fixes: a8b92ca1b0 ("IB/mlx5: Introduce DEVX")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use uid as part of alloc/dealloc transport domain to let firmware manages
the resources correctly.
Fixes: d2d19121ae ("IB/mlx5: Set uid as part of TD commands")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 updates taken for dependencies on following patches.
* branche 'mlx5-next': (23 commits)
IB/mlx5: Introduce uid as part of alloc/dealloc transport domain
net/mlx5: Add shared Q counter bits
net/mlx5: Continue driver initialization despite debugfs failure
net/mlx5: Fold the modify lag code into function
net/mlx5: Add lag affinity info to log
net/mlx5: Split the activate lag function into two routines
net/mlx5: E-Switch, Introduce flow counter affinity
IB/mlx5: Unify e-switch representors load approach between uplink and VFs
net/mlx5: Use lowercase 'X' for hex values
net/mlx5: Remove duplicated include from eswitch.c
net/mlx5: Remove the get protocol device interface entry
net/mlx5: Support extended destination format in flow steering command
net/mlx5: E-Switch, Change vhca id valid bool field to bit flag
net/mlx5: Introduce extended destination fields
net/mlx5: Revise gre and nvgre key formats
net/mlx5: Add monitor commands layout and event data
net/mlx5: Add support for plugged-disabled cable status in PME
net/mlx5: Add support for PCIe power slot exceeded error in PME
net/mlx5: Rework handling of port module events
net/mlx5: Move flow counters data structures from flow steering header
...
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
Increasing the depth of control path command queue to 8K entries to handle
burst of commands. This feature needs support from FW and the driver/fw
compatibility is checked from the interface version number.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Get HWRM interface major, minor, build and patch version from FW for
checking the FW/Driver compatibility.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acquiring the rtnl lock while holding usdev_lock could result in a
deadlock.
For example:
usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock)
| ib_get_eth_speed()
| rtnl_lock()
rtnl_lock()
| usnic_ib_netdevice_event()
| mutex_lock(&us_ibdev->usdev_lock)
This commit moves the usdev_lock acquisition after the rtnl lock has been
released.
This is safe to do because usdev_lock is not protecting anything being
accessed in ib_get_eth_speed(). Hence, the correct order of holding locks
(rtnl -> usdev_lock) is not violated.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.
This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Modify allocation of the non-SRQ receive queues such that immediate
data is aligned on a 512 byte boundary. That alignment is necessary
to pass the immediate data without copying to the block layer. When
receiving an SRP_CMD with immediate data, postpone the ib_post_recv()
call until target_execute_cmd() has finished. See also
srpt_release_cmd().
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch does not change any functionality but makes the next patch
easier to read.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Neither a driver version number nor a release data is useful in
an upstream driver. Remove the word "InfiniBand" from the driver
description because recently RoCE support has been added to this
driver.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add documentation for those structure members for which it is missing.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make sure that long strings occur on a single line as required by the
coding standard.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use tabs instead of spaces for indentation. Make sure that multi-line
expressions have the operator at the end of a line instead of the start.
Avoid a complaint about a missing space in a ternary expression by
changing '(boolean) ? 1: 0' into 'boolean'.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Request permission to send immediate data during login. If the SRP
target grants this request, send the payload of write requests <= 8 KB
as immediate data.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Move the maximum initiator to target information unit length parameter
from struct srp_target_port into struct srp_rdma_ch. This patch does
not change any functionality but makes the next patch easier to read.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since srp_rdma_ch.max_ti_iu_len is used in the hot path, move it to the
section with data structure members used in the hot path.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reserve additional space for CDBs that contain more than sixteen bytes
and set the add_cdb_len field for such CDBs as required. From the SRP
standard: "The ADDITIONAL CDB LENGTH field contains the length in
dwords of the ADDITIONAL CDB field."
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch avoids that a warning is reported when building with W=1.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add constants and data structures to support immediate data. These
changes conform to SRP2r04.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch moves all constants that come from the SRP standard into the
include/scsi/srp.h header file.
Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not enabled, we were getting
build failures for defined but not used code. Fix that.
Fixes: 813e90b1ae ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Most SCSI drivers want to enable "clustering", that is merging of
segments so that they might span more than a single page. Remove the
ENABLE_CLUSTERING define, and require drivers to explicitly set
DISABLE_CLUSTERING to disable this feature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.
Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Having uobject pointer embedded in ib core objects is not aligned with a
future shared ib_x model. The resource tracker only does this to keep
track of user/kernel objects - track this directly instead.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The verb advise_mr() is used to give advice to the kernel about an address
range that belongs to a MR. Implement the verb and register it on the
device. The current implementation supports the only known advice to date,
prefetch.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add new ioctl method for the MR object - ADVISE_MR.
This command can be used by users to give an advice or directions to the
kernel about an address range that belongs to memory regions.
A new ib_device callback, advise_mr(), is introduced here to suupport the
new command. This command takes the following arguments:
- pd: The protection domain to which all memory regions belong
- advice: The type of the advice
* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH - Pre-fetch a range of
an on-demand paging MR
* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE - Pre-fetch a range
of an on-demand paging MR with write intention
- flags: The properties of the advice
* IB_UVERBS_ADVISE_MR_FLAG_FLUSH - Operation must end before
return to the caller
- sg_list: The list of memory ranges
- num_sge: The number of memory ranges in the list
- attrs: More attributes to be parsed by the provider
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When the parser of an ioctl command has the knowledge that a ptr attribute
in a bundle represents an array of structures, it is useful for it to know
the number of elements in the array. This is done by dividing the
attribute length with the element size.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add an ioctl method to destroy the PD, MR, MW, AH, flow, RWQ indirection
table and XRCD objects by handle which doesn't require any output response
during destruction.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Introduce a helper function gather_objects_handle() to copy object handles
under a spin lock.
Expose these objects handles via the uverbs ioctl interface.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be
left. Use it instead of hard-coding the HW prefetch size.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The function accidentally returns success on this error path.
Fixes: c7bcb13442 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We accidentally return success on this error path.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently a RoCE GID entry is removed from the hardware when all
references to the GID entry drop to zero. This is a change in behavior
from before the fixed patch. The GID entry should be removed from the
hardware when GID entry deletion is requested. This allows the driver
terminate ongoing traffic through the RoCE GID.
While a GID is deleted from the hardware, GID slot in the software GID
cache is not freed. GID slot is freed once all references of such GID are
dropped. This continue to ensure that such GID slot of hardware is not
allocated to new GID entry allocation request. It is allocated once all
references to GID entry drop.
This approach allows drivers to put a tombestone of some kind on the HW
GID index to block the traffic.
Fixes: b150c3862d ("IB/core: Introduce GID entry reference counts")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The initialization of the ib_device_ops was dropped by mistake when
rebasing the ib_device_ops series, this patch fixes that.
Fixes: 15644f57cb ("RDMA/i40iw: Initialize ib_device_ops struct")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Handle atomic was left as unimplemented from 2013, remove the code till
this part will be developed.
Remove the dead code by simplifying SW completion logic which is supposed
to be the same for send and receive paths.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that the handlers do not process their own udata we can make a
sensible ioctl that wrappers them. The ioctl follows the same format as
the write_ex() and has the user explicitly specify the core and driver
in/out opaque structures and a command number.
This works for all forms of write commands.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With the introduction of SR-IOV LAG, checking whether LAG is active
is no longer good enough, since RoCE and SR-IOV LAG each entails
different behavior by both the core and infiniband drivers.
This patch introduces facilities to discern LAG type, in addition to
mlx5_lag_is_active(). These are implemented in such a way as to allow
more complex mode combinations in the future.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev
conflicts.
Highlights:
1) Lag refactroing and flow counter affinity bits.
2) mlx5 core cleanups
By Roi Dayan (2) and others
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Fold the modify lag code into function
net/mlx5: Add lag affinity info to log
net/mlx5: Split the activate lag function into two routines
net/mlx5: E-Switch, Introduce flow counter affinity
IB/mlx5: Unify e-switch representors load approach between uplink and VFs
net/mlx5: Use lowercase 'X' for hex values
net/mlx5: Remove duplicated include from eswitch.c
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When in switchdev mode and the add function is called by the core
level driver, make sure we only register the callbacks, but don't
create the mlx5 IB device or initialize anything. With this change
all the IB devices in switchdev mode are created only once the load
callback is invoked by the e-switch core sub-module. This follows
the design paradigm under which the all the Eth representors must
be loaded before any of IB reprs is loaded.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When support for bonding of RoCE devices was added, there was
necessarily a link between the RoCE device and the paired netdevice that
was part of the bond. If you remove the mlx4_en module, that paired
association is broken (the RoCE device is still present but the paired
netdevice has been released). We need to account for this in
is_upper_ndev_bond_master_filter() and filter out those links with a
broken pairing or else we later oops in netdev_next_upper_dev_rcu().
Fixes: 408f1242d9 ("IB/core: Delete lower netdevice default GID entries in bonding scenario")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops() and remove the use of check_driver_override().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change introduces the ib_device_ops structure that defines all the
InfiniBand device operations in one place, so the code will be more
readable and clean, unlike today when the ops are mixed with ib_device
data members.
The providers will need to define the supported operations and assign them
using ib_set_device_ops(), that will also make the providers code more
readable and clean.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
NULL check for kfree is unnecessary, remove it.
Fixes: b42dde478b ("IB/mlx4: Rework special QP creation error path")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In opposite to current implementation of identification based on device
name, PCI-ID identification provides stable names suitable for device
rename. Change ocrdma debugfs representation to use PCI-ID.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clear extra bytes in response in batch manner instead
of doing it per-byte.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
RDMA core layer already make sure port is valid, no need to check it here
again.
For the pkey validation this depends on commit b3ac5742fead ("RDMA/core:
Validate port number in query_pkey verb")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IB representors don't support creation of RAW ethernet QP flows. Disable
them by reusing existing RDMA/core support macros. We do it for both
creation and matcher because latter is not usable if no flow creation is
available.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report to the user 2x width over MAD interface.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report HDR speed when HDR is supported in CapabilityMask2 and the actual
speed is HDR.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
CapabilityMask2 exists when IB_PORT_CAP_MASK2_SUP is set in the original
capability mask. In such cases, query its value and report it in query
port.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the new rates that were added to Infiniband spec as part of HDR and 2x
support.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Array iterator stays at the same slot, fix it.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements a cmdq to enable the loopback of ssu module
according to the modified hardware desgin.
The ssu consists of ingress unit, packet buffer and programmable packet
process unit. if the loopback bit of ssu is not enabled, the roce packet
with loopback bit will fail.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch updates the implementation of the mailbox command interface by
using command queue instead of operating registers. With this update, the
software can be well decoupled with the hardware.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It will prevent multiply overflow when defines the pbl for u64 type.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch move the codes of qp state transition into the new function as
well as simplify the logic for other qp states transition.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It needs to clear qp context previous when init qp context. Otherwise,
the newly created qp context residue has the contents of the qp context
before the uninstall, and the qp context content is disordered, causing
the task to fail.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mlx5-next shared branch with rdma subtree to avoid mlx5 rdma v.s. netdev
conflicts.
Highlights:
1) RDMA ODP (On Demand Paging) improvements and moving ODP logic to
mlx5 RDMA driver
2) Improved mlx5 core driver and device events handling and provided API
for upper layers to subscribe to device events.
3) RDMA only code cleanup from mlx5 core
4) Add helper to get CQE opcode
5) Rework handling of port module events
6) shared mlx5_ifc.h updates to avoid conflicts
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
GRE RFC defines a 32 bit key field. NVGRE RFC splits the 32 bit
key field to 24 bit VSID (gre_key_h) and 8 bit flow entropy (gre_key_l).
Define the two key parsing alternatives in a union, thus enabling both
access methods.
Signed-off-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new helper that extracts the opcode
from a CQE (completion queue entry) structure.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Before calling the driver's function let's make sure port is valid.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Danit Goldberg says:
Packet based credit mode
Packet based credit mode is an alternative end-to-end credit mode for QPs
set during their creation. Credits are transported from the responder to
the requester to optimize the use of its receive resources. In
packet-based credit mode, credits are issued on a per packet basis.
The advantage of this feature comes while sending large RDMA messages
through switches that are short in memory.
The first commit exposes QP creation flag and the HCA capability. The
second commit adds support for a new DV QP creation flag. The last commit
report packet based credit mode capability via the MLX5DV device
capabilities.
* branch 'mlx5-packet-credit-fc':
IB/mlx5: Report packet based credit mode device capability
IB/mlx5: Add packet based credit mode support
net/mlx5: Expose packet based credit mode
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Report packet based credit mode capability via the mlx5 DV interface.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.
This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Utilize rdma_is_port_valid to validate the given port.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the function always returns 0 make it void.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Flow table can be passed as a DEVX object which is a valid destination in
an EGRESS flow. Fix the original code to allow that.
Fixes: a7ee18bdee ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This fixes a compilation warning in sysfs.c
drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be
truncated copying 8 bytes from a string of length 31
[-Wstringop-truncation]
By eliminating the temporary stack buffer.
Signed-off-by: Qian Cai <cai@gmx.us>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit 4e045572e2 ("IB/hfi1: Add unique txwait_lock for txreq events")
laid the ground work to support per resource waiting locking.
This patch adds that with a lock unique to each sdma engine and pio
sendcontext and makes necessary changes for verbs, PSM, and vnic to use
the new locks.
This is particularly beneficial for smaller messages that will exhaust
resources at a faster rate.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The call to sdma_progress() is called outside the wait lock.
In this case, there is a race condition where sdma_progress() can return
false and the sdma_engine can idle. If that happens, there will be no
more sdma interrupts to cause the wakeup and the vnic_sdma xmit will hang.
Fix by moving the lock to enclose the sdma_progress() call.
Also, delete the tx_retry. The need for this was removed by:
commit bcad29137a ("IB/hfi1: Serve the most starved iowait entry first")
Fixes: 64551ede6c ("IB/hfi1: VNIC SDMA support")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds an interface to allow the driver to initialize the QP priv
struct when the QP is created and after the qpn has been assigned. A
field is added to the QP priv struct to reference the rcd and two new
files are added to contain the function to initialize the rcd field so
that more TID RDMA related code can be added here later.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The OPFN and TID RDMA capability bits are added to allow users to control
which feature is enabled and disabled.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, When a reserved operation is completed, its entry in the send
queue will not be unreserved, which leads to the miscalculation of
qp->s_avail and thus the triggering of a WARN_ON call trace. This patch
fixes the problem by unreserving the reserved operation when it is
completed.
Fixes: 856cc4c237 ("IB/hfi1: Add the capability for reserved operations")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ingress packet check for 16B/bypass packets should consider the port
LMC. Not doing this will result in packets sent to the LMC LIDs getting
dropped. The check is implemented in HW for 9B packets.
Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to
this:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1]
PGD 0
Oops: 0000 1 SMP
Call Trace:
? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1]
hfi1_verbs_send+0xdf/0x250 [hfi1]
? make_rc_ack+0xa80/0xa80 [hfi1]
hfi1_do_send+0x192/0x430 [hfi1]
hfi1_do_send_from_rvt+0x10/0x20 [hfi1]
rvt_post_send+0x369/0x820 [rdmavt]
ib_uverbs_post_send+0x317/0x570 [ib_uverbs]
ib_uverbs_write+0x26f/0x420 [ib_uverbs]
? security_file_permission+0x21/0xa0
vfs_write+0xbd/0x1e0
? mntput+0x24/0x40
SyS_write+0x7f/0xe0
system_call_fastpath+0x16/0x1b
Fix by adding the missing sizing check to correctly determine the sge
length.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
VNIC assumes that all SDMA engines have been configured for use. This is
not necessarily true (i.e. if the count was constrained by the module
parameter).
Update VNICs usage to use the configured count, rather than the hardware
count.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Gary Leshner <gary.s.leshner@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A CA is supposed to ignore FECN bits in multicast, ACK, and CNP
packets. This patch corrects the behavior of the HFI1 driver in this
regard by ignoring FECNs in those packet types.
While fixing the above behavior, fix the extraction of the FECN and BECN
bits from the packet headers for both 9B and 16B packets.
Furthermore, this patch corrects the driver's response to a FECN in RDMA
READ RESPONSE packets. Instead of sending an "empty" ACK, the driver now
sends a CNP packet. While editing that code path, add the missing trace
for CNP packets.
Fixes: 88733e3b84 ("IB/hfi1: Add 16B UD support")
Fixes: f59fb9e051 ("IB/hfi1: Fix handling of FECN marked multicast packet")
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When it is requested to change its physical state back to Offline while in
the process to go up, DC8051 will set the ERROR field in the
DC8051_DBG_ERR_INFO_SET_BY_8051 register. This ERROR field will remain
until the next time when DC8051 transitions from Offline to Polling.
Subsequently, when the host requests DC8051 to change its physical state
to Polling again, it may receive a DC8051 interrupt with the stale ERROR
field still in DC8051_DBG_ERR_INFO_SET_BY_8051. If the host link state has
been changed to Polling, this stale ERROR will force the host to
transition to Offline state, resulting in a vicious cycle of Polling
->Offline->Polling->Offline. On the other hand, if the host link state is
still Offline when the stale ERROR is received, the stale ERROR will be
ignored, and the link will come up correctly. This patch implements the
correct behavior by changing host link state to Polling only after DC8051
changes its physical state to Polling.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Krzysztof Goreczny <krzysztof.goreczny@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch dumps the pio info for non-user send contexts to assist
debugging in the field.
Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com>
Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_change_flags().
Therefore extend dev_change_flags() with and extra extack argument and
update all users. Most of the calls end up just encoding NULL, but
several sites (VLAN, ipvlan, VRF, rtnetlink) do have extack available.
Since the function declaration line is changed anyway, name the other
function arguments to placate checkpatch.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch implements the process flow of SRQ asynchronous
event.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch implements the SRQ(Share Receive Queue) verbs
and update the poll cq verbs to deal with SRQ complentions.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch inits hem resource for SRQ table, includes
SRQWQE and SRQWQE index resource.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch configures the flags for enabling the
SRQ(Share Receive Queue) capacity as well as update the
verb of querying device for setting srq specifications.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allows XRC usage from the verbs flow in a DEVX context.
As XRCD is some shared kernel resource between processes it should be
created with UID=0 to point on that.
As a result once XRC QP/SRQ are created they must be used as well with
UID=0 so that firmware will allow the XRCD usage.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update the supported DEVX commands, it includes adding to the
query/modify command's list and to the encoding handling.
In addition, a valid range for general commands was added to be used for
future commands.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enforce DEVX privilege by firmware, this enables future device
functionality without the need to make driver changes unless a new
privilege type will be introduced.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enables modify and query verbs objects via the DEVX interface.
To support this the above DEVX handlers were changed to get any
object type via the UVERBS_IDR_ANY_OBJECT mechanism.
The type checking and handling is done per object as part of the
driver code.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enable getting an object type from a given uobject, the type is saved
upon tree merging and is returned as part of some helper function.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Introduce the UVERBS_IDR_ANY_OBJECT type to match any IDR object.
Once used, the infrastructure skips checking for the IDR type, it
becomes the driver handler responsibility.
This enables drivers to get in a given method an object from various of
types.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The enhanced devx support series needs commit:
9d43faac02 ("net/mlx5: Update mlx5_ifc with DEVX UCTX capabilities bits")
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no need to perform modify_rmp in two separate function,
while one of them uses stack as a placeholder for data while other
allocates it dynamically. Combine those two functions to one call
instead of two.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to perform create_rmp in two separate function, while
one of them uses stack as a placeholder for data while other allocates
it dynamically. Combine those two functions to one instead of two.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Transfer initialization and cleanup from mlx5_priv struct of
mlx5_core_dev to be part of mlx5_ib_dev. This completes removal
of SRQ from mlx5_core.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reflect the change of moving SRQ code from mlx5_core to mlx5_ib by
updating function signatures do not require mlx5_core_dev as an input,
because all operations in mlx5_ib are supposed to use mlx5_ib_dev.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reuse existing infrastructure to initialize and release DEVX uid.
The DevX interface is intended for user space access, so it is supposed
to be initialized before ib_register_device(). Also it isn't supported
in switchdev mode and don't need to initialize it in that mode.
Fixes: 76dc5a8406 ("IB/mlx5: Manage device uid for DEVX white list commands")
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
SRQ signature is not supported, hence no need for special static
global variable to announce it.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to keep SRQ which is RDMA object in mlx5_core.
In this patch, we partially move the execution code, while next patches
will move table initialization/release logic too.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Ensure that both RDMA and netdev parts of SRQ implementation
has same copyright and license information annotated by SPDX
tags.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Since any page fault may be interrupted by a MMU invalidation and implicit
leaf MR may be released during this process. The check for parent value
is unreliable condition for an implicit MR.
Use other condition that we can rely on to determine if MR is implicit.
Fixes: b4cfe447d4 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A recent performance enhancement introduced a latency issue in the
HFI message path. The new algorithm removed a forced call send for
PIO messages and added a forced schedule event for messages larger
than the MTU.
For PIO, the schedule path can introduce thrashing that can
significantly impact the throughput for small messages.
If a message size is within the PIO threshold, always take the send
path.
Fixes: 0b79b27748 ("IB/{hfi1, qib, rdmavt}: Schedule multi RC/UC packets instead of posting")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add ability to track allocated ib_ucontext, which are limited
resource and worth to be visible by users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All of the old arguments can be derived from the uverbs_attr_bundle
structure, so get rid of the redundant arguments. Most of the prior work
has been removing users of the arguments to allow this to be a simple
patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the user did not provide a long enough command buffer then the missing
bytes are forced to zero. There is no reason to check the length if a zero
value is OK.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This has a very complicated memory layout, with two flex arrays. Use
the iterator API to make reading it clearer.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Several methods have a command with a trailing flex array, and they
all open code some extraction scheme. Centralize this into a simple
iterator API.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We truncate the response structure if there is not enough room in the
user buffer so there is no reason to have all the mess with finely managing
response_length. Just fully fill the attrs and truncate on copy.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A response struct was defined, and userspace is providing it (but not
checking it). Fill it in and write it out.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The write_ex handlers have this horrible boilerplate in every function to
do the zero extend/zero check and min size checks. This is now handled in
the core code via the meta-data, and the zero checks are handled by
uverbs_request(). Replace all the occurrences.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This function properly zero-extends, and zero-checks if the user
buffer is not the same size as the kernel command struct.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This function properly truncates and zero-fills the response which is the
standard used by the ioctl uAPI when working with user data.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no reason for this. For response processing we simply need to
copy, truncate, and zero fill the response into whatever output buffer
was provided. Add a function uverbs_response() that does this
consistently.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This creates a consistent way to access the two core buffers across write
and write_ex handlers.
Remove the open coded ucore conversion in the write/ex compatibility
handlers.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
write() methods must work with fixed sized structures as that is the only
way to know where the udata segment starts. The common udata code now
rejects any write() that has a response buffer shorter than the core's
response.
Thus all the checks of out_len for write methods are redundant and can be
removed.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Handle FW general event rq delay drop as it was received from FW via mlx5
notifiers API, instead of handling the processed software version of that
event. After this patch we can safely remove all software processed FW
events types and definitions.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Use the FW version of the port change event as forwarded via new mlx5
notifiers API.
After this patch, processed software version of the port change event
will become deprecated and will be totally removed in downstream
patches.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Remove the deprecated mlx5_interface->event mlx5_ib callback and use new
mlx5 notifier API to subscribe for mlx5 events.
For native mlx5_ib devices profiles pf_profile/nic_rep_profile register
the notifier callback mlx5_ib_handle_event which treats the notifier
context as mlx5_ib_dev.
For vport repesentors, don't register any notifier, same as before, they
didn't receive any mlx5 events.
For slave port (mlx5_ib_multiport_info) register a different notifier
callback mlx5_ib_event_slave_port, which knows that the event is coming
for mlx5_ib_multiport_info and prepares the event job accordingly.
Before this on the event handler work we had to ask mlx5_core if this is
a slave port mlx5_core_is_mp_slave(work->dev), now it is not needed
anymore.
mlx5_ib_multiport_info notifier registration is done on
mlx5_ib_bind_slave_port and de-registration is done on
mlx5_ib_unbind_slave_port.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current implementation of create QP requires contiguous memory, such a
requirement is problematic once the memory is fragmented or the system is
low in memory, it causes failures in dma_zalloc_coherent().
This patch takes advantage of the new mlx5_core API which allocates a
fragmented buffer. This makes the QP creation much more resilient to
memory fragmentation. Data-path code was adapted to the fact that WQEs can
cross buffers.
We also use the opportunity to fix some cosmetic legacy coding convention
errors which were in the feature scope.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation of create SRQ requires contiguous memory, such
a requirement is problematic once the memory is fragmented or the system
is low in memory, it causes failures in dma_zalloc_coherent().
This patch takes the advantage of the new mlx5_core API which allocates a
fragmented buffer, and makes the SRQ creation much more resilient to
memory fragmentation. Data-path code was adapted to the fact that WQEs can
cross buffers.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
FRWR memory registration is done with a series of calls and WRs.
1. ULP invokes ib_dma_map_sg()
2. ULP invokes ib_map_mr_sg()
3. ULP posts an IB_WR_REG_MR on the Send queue
Step 2 generates an iova. It is permissible for ULPs to change this
iova (with certain restrictions) between steps 2 and 3.
rxe_map_mr_sg captures the MR's iova but later when rxe processes the
REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova
after step 2 but before step 3, rxe never captures that change.
When the remote sends an RDMA Read targeting that MR, rxe looks up the
R_key, but the altered iova does not match the iova stored in the MR,
causing the RDMA Read request to fail.
Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Allow a user to attach a DEVX counter via mlx5 raw flow creation. In order
to attach a counter we introduce a new attribute:
MLX5_IB_ATTR_CREATE_FLOW_ARR_COUNTERS_DEVX
A counter can be attached to multiple flow steering rules.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
QIB driver was added in 2010 with many BUG_ON(), most of them were cleaned
out after years of development and usages.
It looks like that it is safe now to remove rest of BUG_ONs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is a spelling mistake in a usnic_err error message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
drivers/infiniband/core/uverbs_cmd.c:1095:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: 7106a97697 ("RDMA/uverbs: Make write() handlers return 0 on success")
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix spelling mistake in usnic_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pagefaults occurred in non-ODP MR are completely valid events, so
initialize return variable to 0.
Fixes: 4d5422a309 ("IB/mlx5: Skip non-ODP MR when handling a page fault")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
iscsi_target_mod is the only LIO fabric where fabric_ops.name differs from
the fabric_ops.fabric_name string. fabric_ops.name is used when matching
target/$fabric ConfigFS create paths, so rename it .fabric_alias and
fallback to target/$fabric vs .fabric_name comparison if .fabric_alias
isn't initialised. iscsi_target_mod is the only fabric module to set
.fabric_alias . All other fabric modules rely on .fabric_name matching and
can drop the duplicate string.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All fabrics return a const string. In all cases *except* iSCSI the
get_fabric_name() string matches fabric_ops.name.
Both fabric_ops.get_fabric_name() and fabric_ops.name are user-facing, with
the former being used for PR/ALUA state and the latter for ConfigFS
(config/target/$name), so we unfortunately need to keep both strings around
for now. Replace the useless .get_fabric_name() accessor function with a
const string fabric_name member variable.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Have the core code initialize the driver_udata if the method has a udata
description. This is done using the same create_udata the handler was
supposed to call.
This makes ioctl consistent with the write and write_ex paths.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that we have metadata describing the command format the core code can
directly compute the udata pointers and all the really ugly
ib_uverbs_init_udata() calls can be removed from the handlers.
This means all the write() handlers are no longer sensitive to the layout
of the command buffer.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The core code needs to compute the udata so we may as well pass it in the
uverbs_attr_bundle instead of on the stack. This converts the simple case
of write_ex() which already has a core calculation.
Also change the write() path to use the attrs for ib_uverbs_init_udata()
instead of on the stack. This lets the write to write_ex compatibility
path continue to follow the lead of the _ex path.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The size meta-data in the prior patch describes the smallest acceptable
buffer for the write() interface. Globally check this in the core code.
This is necessary in the case of write() methods that have a driver udata
to prevent computing a negative udata buffer length.
The return code of -ENOSPC is chosen here as some of the handlers already
use this code, however many other handler use EINVAL.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
We need the structure sizes to compute the location of the udata in the
core code. Annotate the sizes into the new macro language.
This is generated largely by script and checked by comparing against the
similar list in rdma-core.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The uverbs_attr_bundle already contains this pointer, and most methods
don't actually need it. Get rid of the redundant function argument.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Currently they return the command length, while all other handlers return
0. This makes the write path closer to the write_ex and ioctl path.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that we can add meta-data to the description of write() methods we
need to pass the uverbs_attr_bundle into all write based handlers so
future patches can use it as a container for any new data transferred out
of the core.
This is the first step to bringing the write() and ioctl() methods to a
common interface signature.
This is a simple search/replace, and we push the attr down into the uobj
and other APIs to keep changes minimal.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is a spelling mistake in the module description text, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Memory windows are implemented with an indirect MKey, when a page fault
event comes for a MW Mkey we need to find the MR at the end of the list of
the indirect MKeys by iterating on all items from the first to the last.
The offset calculated during this process has to be zeroed after the first
iteration or the next iteration will start from a wrong address, resulting
incorrect ODP faulting behavior.
Fixes: db570d7dea ("IB/mlx5: Add ODP support to MW")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The invalidate range was using PAGE_SIZE instead of the computed 'end',
and had the wrong transformation of page_index due the weird
construction. This can trigger during error unwind and would cause
malfunction.
Inline the code and correct the math.
Fixes: 403cd12e2c ("IB/umem: Add contiguous ODP support")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
It is possible that we call pagefault_single_data_segment() with a MKey
that belongs to a memory region which is not on demand (i.e. pinned
pages). This can happen if, for instance, a WQE that points to multiple
MRs where some of them are ODP MRs and some are not. In this case we
don't need to handle this MR in the ODP context besides reporting success.
Otherwise the code will call pagefault_mr() which will do to_ib_umem_odp()
on a non-ODP MR and thus access out of bounds.
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
I do not see how one can effectively use skb_insert() without holding
some kind of lock. Otherwise other cpus could have changed the list
right before we have a chance of acquiring list->lock.
Only existing user is in drivers/infiniband/hw/nes/nes_mgt.c and this
one probably meant to use __skb_insert() since it appears nesqp->pau_list
is protected by nesqp->pau_lock. This looks like nesqp->pau_lock
could be removed, since nesqp->pau_list.lock could be used instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: linux-rdma <linux-rdma@vger.kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current hns driver assigned the first two PBL page addresses from previous
registered MR to the hardware when reregister MR changing the memory
locations occurred. This will lead to PBL addressing error as the PBL has
already been released. This patch fixes this wrong assignment by using the
page address from new allocated PBL.
Fixes: a2c80b7b41 ("RDMA/hns: Add rereg mr support for hip08")
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the fw supports returning VIN/VIVLD in FW_VI_CMD save it
in port_info structure else retrieve these from viid and save
them in port_info structure. Do the same for smt_idx from
FW_VI_MAC_CMD
Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the rdma device is getting removed, get resource info can race with
device removal, as below:
CPU-0 CPU-1
-------- --------
rdma_nl_rcv_msg()
nldev_res_get_cq_dumpit()
mutex_lock(device_lock);
get device reference
mutex_unlock(device_lock); [..]
ib_unregister_device()
/* Valid reference to
* device->dev exists.
*/
ib_dealloc_device()
[..]
provider->fill_res_entry();
Even though device object is not freed, fill_res_entry() can get called on
device which doesn't have a driver anymore. Kernel core device reference
count is not sufficient, as this only keeps the structure valid, and
doesn't guarantee the driver is still loaded.
Similar race can occur with device renaming and device removal, where
device_rename() tries to rename a unregistered device. While this is fine
for devices of a class which are not net namespace aware, but it is
incorrect for net namespace aware class coming in subsequent series. If a
class is net namespace aware, then the below [1] call trace is observed in
above situation.
Therefore, to avoid the race, keep a reference count and let device
unregistration wait until all netlink users drop the reference.
[1] Call trace:
kernfs: ns required in 'infiniband' for 'mlx5_0'
WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120
libahci i2c_core mlxfw libata dca [last unloaded: devlink]
RIP: 0010:kernfs_find_ns+0x104/0x120
Call Trace:
kernfs_find_and_get_ns+0x2e/0x50
sysfs_rename_link_ns+0x40/0xb0
device_rename+0xb2/0xf0
ib_device_rename+0xb3/0x100 [ib_core]
nldev_set_doit+0x165/0x190 [ib_core]
rdma_nl_rcv_msg+0x249/0x250 [ib_core]
? netlink_deliver_tap+0x8f/0x3e0
rdma_nl_rcv+0xd6/0x120 [ib_core]
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2f0/0x3e0
sock_sendmsg+0x30/0x40
__sys_sendto+0xdc/0x160
Fixes: da5c850782 ("RDMA/nldev: add driver-specific resource tracking")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Perform CQ initialization in the driver when the capability is supported
by the FW. When passing the CQ to HW indicate that the CQ buffer has
been pre-initialized.
Doing so decreases CQ creation time. Testing on P8 showed a single 2048
entry CQ creation time was reduced from ~395us to ~170us, which is
2.3x faster.
Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently several rdma_cm module specific functions are declared in
core_priv.h file. Now that we have cma_priv.h file specific to rdma_cm
kernel module, move them from core_priv.h to cma_priv.h
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add annotations to the uverbs_api structure indicating which driver
methods are called by the implementation. If the required method
is NULL the write API will be not be callable.
This effectively duplicates the cmd_mask system, however it does it by
expressing invariants required by the core code, not by delegating
decision making to the driver. This is another step toward eliminating
cmd_mask.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Now that we use struct uverbs_uapi to link the method functions to the
dispatcher there is no reason to have them be extern symbols.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
This organizes the write commands into objects and links them to the
uverbs_api data structure. The command path is reworked to use uapi
instead of its internal structures.
The command mask is moved from a runtime check to a registration time
check in the uapi.
Since the write interface does not have the object ID as part of the
command, the radix bins are converted into linear lists to support the
lookup.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Bringing all uapi entry points into one place lets us deal with them
consistently. For instance the write, write_ex and ioctl paths can be
disabled when an API is not supported by the driver.
This will replace the uverbs_cmd_table static arrays.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
If we can't destroy the object then we certainly shouldn't allow it be
created or used. Remove it from the uverbs_uapi in this case.
This also disables methods of other objects that have mandatory object
handle inputs - ie REG_DM_MR is now automatically removed if DM objects
cannot be created.
Typically drivers not supporting an interface will mark all of the
supporting functions as NULL, including destroy.
This is intended to automatically eliminate entire corner cases in the API
that are difficult to test.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Rely on UAPI_DEF_IS_OBJ_SUPPORTED instead of manipulating the contents of
the driver's definition list.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
We have many cases where parts of the uapi are not supported in a driver,
needs a certain protocol, or whatever. It is best to reflect this directly
into the struct uverbs_api when it is built so that everything is simply
blocked off, and future introspection can report a proper supported list.
This is done by adding some additional helpers to the definition list
language that disable objects based on a 'supported' call back, and a
helper that disables based on a NULL struct ib_device function pointer.
Disablement is global. For instance, if a driver disables an object then
everything connected to that object is removed, including core methods.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The next patch needs another copy of this, provide a simple helper to
reduce the coding. uapi_add_get_elm() returns an existing entry or adds a
new one.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The 'tree' data structure is very hard to build at compile time, and this
makes it very limited. The new radix tree based compiler can handle a more
complex input language that does not require the compiler to perfectly
group everything into a neat tree structure.
Instead use a simple list to describe to input, where the list elements
can be of various different 'opcodes' instructing the radix compiler what
to do. Start out with opcodes chaining to other definition lists and
chaining to the existing 'tree' definition.
Replace the very top level of the 'object tree' with this list type and
get rid of struct uverbs_object_tree_def and DECLARE_UVERBS_OBJECT_TREE.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
For DM there is no reason not to add the spec for the START_OFFSET, if DM
is not supported then ib_dev.alloc_dm is already set to NULL which ensures
we do not call the method.
For IPSEC, the core code should be setting ib_dev.create_flow_action_esp
to NULL to disable it, not relying on wonky manipulation of the specs.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The mlx4 driver does not trigger an IB_EVENT_PORT_ACTIVE when the RoCE
network interface is activated. When SMC determines the RoCE device port
to be used, it checks the port states. This patch triggers IB events for
NETDEV_UP and NETDEV_DOWN.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Only retry connection setup with MPAv1 if the peer actually aborted the
connection upon receiving the MPAv2 start message. This avoids retrying
with MPAv1 in the case where the connection was aborted due to retransmit
timeouts.
Fixes: d2fe99e86b ("RDMA/cxgb4: Add support for MPAv2 Enhanced RDMA Negotiation")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Since the function always returns 0 make it void.
Reported-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There is no need to have the 'struct se_portal_group *tpg' variable static
since new value always be assigned before use.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If for some reason we failed to query the mr status, we need to make sure
to provide sufficient information for an ambiguous error (guard error on
sector 0).
Fixes: 0a7a08ad6f ("IB/iser: Implement check_protection")
Cc: <stable@vger.kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
rdmavt uses a crazy system that looses the type checking when assinging
functions to struct ib_device function pointers. Because of this the
signature to this function was not changed when the below commit revised
things.
Fix the signature so we are not calling a function pointer with a
mismatched signature.
Fixes: 477864c8fc ("IB/core: Let create_ah return extended response to user")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 updates taken for dependencies on later ODP patches.
Conflict resolved by deleting mlx5_ib_get_vector_affinity()
* branch 'mlx5-next': (21 commits)
net/mlx5: EQ, Make EQE access methods inline
{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA
net/mlx5: EQ, Generic EQ
net/mlx5: EQ, Different EQ types
net/mlx5: EQ, Privatize eq_table and friends
net/mlx5: EQ, irq_info and rmap belong to eq_table
net/mlx5: EQ, Create all EQs in one place
net/mlx5: EQ, Move all EQ logic to eq.c
net/mlx5: EQ, Remove redundant completion EQ list lock
net/mlx5: EQ, No need to store eq index as a field
net/mlx5: EQ, Remove unused fields and structures
net/mlx5: EQ, Use the right place to store/read IRQ affinity hint
IB/mlx5: Improve ODP debugging messages
net/mlx5: Use multi threaded workqueue for page fault handling
net/mlx5: Return success for PAGE_FAULT_RESUME in internal error state
IB/mlx5: Lock QP during page fault handling
net/mlx5: Enumerate page fault types
net/mlx5: Add interface to hold and release core resources
net/mlx5: Release resource on error flow
net/mlx5: Fix offsets of ifc reserved fields
...
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is required so the user can set the SL on the DC QP.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the firmware reports a connection width that is not 1x, 4x, 8x or 12x
it causes the driver to fail during initialization.
To prevent this failure every time a new width is introduced to the RDMA
stack, we will set a default 4x width for these widths which ar unknown to
the driver.
This is needed to allow to run old kernels with new firmware.
Cc: <stable@vger.kernel.org> # 4.1
Fixes: 1b5daf11b0 ("IB/mlx5: Avoid using the MAD_IFC command under ISSI > 0 mode")
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extended atomics are supported with RC and XRC QP types, but the commit
citied in the Fixes line added an unneeded check to
to_mlx5_access_flags. This broke XRC QPs.
The following ib_atomic_bw invocation over XRC reproduces the issue:
ib_atomic_bw -d mlx5_1 --connection=XRC --atomic_type=FETCH_AND_ADD
It is safe to remove such checks because the QP type was already checked
in ib_modify_qp_is_ok(), which was previously called from
mlx5_ib_modify_qp.
Fixes: a60109dc9a ("IB/mlx5: Add support for extended atomic operations")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently when MAC address is changed, regardless of the netdev reg_state,
GID entries are removed and added to reflect the new MAC address and new
default GID entries.
When a bonding device is used and the underlying PCI device is removed
several netdevice events are generated. Two events of the interest are
CHANGEADDR and UNREGISTER event on lower(slave) netdevice of the bond
netdevice.
Sometimes CHANGEADDR event is generated when netdev state is
UNREGISTERING (after UNREGISTER event is generated). In this scenario, GID
entries for default GIDs are added and never deleted because GID entries
are deleted only when netdev state is < UNREGISTERED.
This leads to non zero reference count on the netdevice. Due to this, PCI
device unbind operation is getting stuck.
To avoid it, when changing mac address, add GID entries only if netdev is
in REGISTERED state.
Fixes: 03db3a2d81 ("IB/core: Add RoCE GID table management")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the
current fence will be SMALL instead of Normal Fence.
Without this patch krping doesn't work on CX-5 devices and throws
following error:
The error messages are from CX5 driver are: (from server side)
[ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434016] 00000000 00000000 00000000 00000000
[ 710.434017] 00000000 00000000 00000000 00000000
[ 710.434018] 00000000 93003204 100000b8 000524d2
[ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32
Fixed the logic to set the correct fence type.
Fixes: 6e8484c5cf ("RDMA/mlx5: set UMR wqe fence according to HCA cap")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Use the new generic EQ API to move all ODP RDMA data structures and logic
form mlx5 core driver into mlx5_ib driver.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Move unnecessary EQ table structures and declaration from the
public include/linux/mlx5/driver.h into the private area of mlx5_core
and into eq.c/eq.h.
Introduce new mlx5 EQ APIs:
mlx5_comp_vectors_count(dev);
mlx5_comp_irq_get_affinity_mask(dev, vector);
And use them from mlx5_ib or mlx5e netdevice instead of direct access to
mlx5_core internal structures.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add and modify debug messages to ODP related error flows.
In that context, return code EAGAIN is considered less severe and print
level for it is set debug instead of warn.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
When page fault event for a WQE arrives, the event data contains the
resource (e.g. QP) number which will later be used by the page fault
handler to retrieve the resource. Meanwhile, another context can destroy
the resource and cause use-after-free. To avoid that, take a reference on the
resource when handler starts and release it when it ends.
Page fault events for RDMA operations don't need to be protected because
the driver doesn't need to access the QP in the page fault handler.
Fixes: d9aaed8387 ("{net,IB}/mlx5: Refactor page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The following:
skb = skb->next;
...
if (skb == (struct sk_buff *)queue)
is transformed into:
skb = skb_peek_next(skb, queue);
...
if (!skb)
Signed-off-by: David S. Miller <davem@davemloft.net>
Use __vlan_hwaccel_put_tag() to set vlan tag and proto fields.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the function rxe_unregister_device always returns 0, it is changed
to void.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable rxe is only used in the function rxe_xmit_packet, and the
caller functions do not use it. So move this variable into the function
rxe_xmit_packet.
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
link_down is self-explanatory.
rdma_sends and rdma_recvs count the number of RDMA Send and RDMA Receive
operations completed successfully. This is different from the existing
sent_pkts and rcvd_pkts counters because the existing counters measure
packets, not RDMA operations.
ack_deffered is renamed to ack_deferred to fix the spelling.
out_of_sequence is renamed to out_of_seq_request to make clear that it is
counting only requests and not other packets which can be out of sequence.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In ib_query_port(), use the netdev's IFF_UP flag to determine phys_state
(flag set = down = POLLING, flag clear = disabled = DISABLED).
Callers can then use the phys_state field to distinguish between links
which have a dead partner, cable missing, etc., from links which are
turned off on the local node. This is useful for HA and supportability.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Devices that does not use managed affinity can not export a vector
affinity as the consumer relies on having a static mapping it can map to
upper layer affinity (e.g. sw queues). If the driver allows the user to
set the device irq affinity, then the affinitization of a long term
existing entites is not relevant.
For example, nvme-rdma controllers queue-irq affinitization is determined
at init time so if the irq affinity changes over time, we are no longer
aligned.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Devices that does not use managed affinity can not export a vector
affinity as the consumer relies on having a static mapping it can map to
upper layer affinity (e.g. sw queues). If the driver allows the user to
set the device irq affinity, then the affinitization of a long term
existing entites is not relevant.
For example, nvme-rdma controllers queue-irq affinitization is determined
at init time so if the irq affinity changes over time, we are no longer
aligned.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Error completions must still contain a valid wr_id and
qp_num such that the consumer can rely on. Correctly
fill these fields in receive error completions.
Reported-by: Walker Benjamin <benjamin.walker@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When resp is in error state, the queued SKBs will not be handled.
The function get_req cleans up the skb queue directly.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This is a mechanical transformation, no change in logic.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Revert 5ff7091f5a ("mm, mmu_notifier: annotate mmu notifiers with
blockable invalidate callbacks").
MMU_INVALIDATE_DOES_NOT_BLOCK flags was the only one used and it is no
longer needed since 93065ac753 ("mm, oom: distinguish blockable mode for
mmu notifiers"). We now have a full support for per range !blocking
behavior so we can drop the stop gap workaround which the per notifier
flag was used for.
Link: http://lkml.kernel.org/r/20180827112623.8992-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This has been a smaller cycle with many of the commits being smallish code
fixes and improvements across the drivers.
- Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and rxe
- Memory window support in hns
- mlx5 user API 'flow mutate/steering' allows accessing the full packet
mangling and matching machinery from user space
- Support inter-working with verbs API calls in the 'devx' mlx5 user API, and
provide options to use devx with less privilege
- Modernize the use of syfs and the device interface to use attribute groups
and cdev properly for uverbs, and clean up some of the core code's device list
management
- More progress on net namespaces for RDMA devices
- Consolidate driver BAR mmapping support into core code helpers and rework
how RDMA holds poitners to mm_struct for get_user_pages cases
- First pass to use 'dev_name' instead of ib_device->name
- Device renaming for RDMA devices
-----BEGIN PGP SIGNATURE-----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=pacJ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a smaller cycle with many of the commits being smallish
code fixes and improvements across the drivers.
- Driver updates for bnxt_re, cxgb4, hfi1, hns, mlx5, nes, qedr, and
rxe
- Memory window support in hns
- mlx5 user API 'flow mutate/steering' allows accessing the full
packet mangling and matching machinery from user space
- Support inter-working with verbs API calls in the 'devx' mlx5 user
API, and provide options to use devx with less privilege
- Modernize the use of syfs and the device interface to use attribute
groups and cdev properly for uverbs, and clean up some of the core
code's device list management
- More progress on net namespaces for RDMA devices
- Consolidate driver BAR mmapping support into core code helpers and
rework how RDMA holds poitners to mm_struct for get_user_pages
cases
- First pass to use 'dev_name' instead of ib_device->name
- Device renaming for RDMA devices"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (242 commits)
IB/mlx5: Add support for extended atomic operations
RDMA/core: Fix comment for hw stats init for port == 0
RDMA/core: Refactor ib_register_device() function
RDMA/core: Fix unwinding flow in case of error to register device
ib_srp: Remove WARN_ON in srp_terminate_io()
IB/mlx5: Allow scatter to CQE without global signaled WRs
IB/mlx5: Verify that driver supports user flags
IB/mlx5: Support scatter to CQE for DC transport type
RDMA/drivers: Use core provided API for registering device attributes
RDMA/core: Allow existing drivers to set one sysfs group per device
IB/rxe: Remove unnecessary enum values
RDMA/umad: Use kernel API to allocate umad indexes
RDMA/uverbs: Use kernel API to allocate uverbs indexes
RDMA/core: Increase total number of RDMA ports across all devices
IB/mlx4: Add port and TID to MAD debug print
IB/mlx4: Enable debug print of SMPs
RDMA/core: Rename ports_parent to ports_kobj
RDMA/core: Do not expose unsupported counters
IB/mlx4: Refer to the device kobject instead of ports_parent
RDMA/nldev: Allow IB device rename through RDMA netlink
...
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
* pci/peer-to-peer:
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
PCI/P2PDMA: Add sysfs group to display p2pmem stats
PCI/P2PDMA: Support peer-to-peer memory
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.
net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'. Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Ok, so last week I thought we had sent our final pull request for 4.19.
Well, wouldn't ya know someone went and found a couple Spectre v1 fixes
were needed :-/. So, a couple *very* small specter patches for this
(hopefully) final -rc week.
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ZHZX
-----END PGP SIGNATURE-----
Merge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Doug writes:
"Really final for-rc pull request for 4.19
Ok, so last week I thought we had sent our final pull request for
4.19. Well, wouldn't ya know someone went and found a couple Spectre
v1 fixes were needed :-/. So, a couple *very* small specter patches
for this (hopefully) final -rc week."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/ucma: Fix Spectre v1 vulnerability
IB/ucm: Fix Spectre v1 vulnerability
Take struct mlx5_frag_buf out of mlx5_frag_buf_ctrl, as it is not
needed to manage and control the datapath of the fragmented buffers API.
struct mlx5_frag_buf contains control info to manage the allocation
and de-allocation of the fragmented buffer.
Its fields are not relevant for datapath, so here I take them out of the
struct mlx5_frag_buf_ctrl, except for the fragments array itself.
In addition, modified mlx5_fill_fbc to initialise the frags pointers
as well. This implies that the buffer must be allocated before the
function is called.
A set of type-specific *_get_byte_size() functions are replaced by
a generic one.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
If no-append flag is set, we will add a new FTE, instead of appending
the actions of the inserted rule when the same match already exists.
While here, move the has_flow_tag boolean indicator to be a flag too.
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanmox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, when a flow rule is created using the FS core layer, the caller
has to pass the entire flow counter object and not just the counter HW
handle (ID). This requires both the FS core and the caller to have
knowledge about the inner implementation of the FS layer flow counters
cache and limits the possible users.
Move to use the counter ID across the place when dealing with flows.
Doing this decoupling, now can we privatize the inner implementation
of the flow counters.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5 updates for both net-next and rdma-next
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: (21 commits)
net/mlx5: Expose DC scatter to CQE capability bit
net/mlx5: Update mlx5_ifc with DEVX UID bits
net/mlx5: Set uid as part of DCT commands
net/mlx5: Set uid as part of SRQ commands
net/mlx5: Set uid as part of SQ commands
net/mlx5: Set uid as part of RQ commands
net/mlx5: Set uid as part of QP commands
net/mlx5: Set uid as part of CQ commands
net/mlx5: Rename incorrect naming in IFC file
net/mlx5: Export packet reformat alloc/dealloc functions
net/mlx5: Pass a namespace for packet reformat ID allocation
net/mlx5: Expose new packet reformat capabilities
{net, RDMA}/mlx5: Rename encap to reformat packet
net/mlx5: Move header encap type to IFC header file
net/mlx5: Break encap/decap into two separated flow table creation flags
net/mlx5: Add support for more namespaces when allocating modify header
net/mlx5: Export modify header alloc/dealloc functions
net/mlx5: Add proper NIC TX steering flow tables support
net/mlx5: Cleanup flow namespace getter switch logic
net/mlx5: Add memic command opcode to command checker
...
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to use PCI P2P memory the pci_p2pmem_map_sg() function must be
called to map the correct PCI bus address.
To do this, check the first page in the scatter list to see if it is P2P
memory or not. At the moment, scatter lists that contain P2P memory must
be homogeneous so if the first page is P2P the entire SGL should be P2P.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Extended atomic operations cmp&swp and fetch&add is a Mellanox
feature extending the standard atomic operation to use, varied
operand sizes, as apposed to normal atomic operation that use
an 8 byte operand only.
Extended atomics allows masking the results and arguments.
This patch configures QP to support extended atomic operation
with the maximum size possible, as exposed by HCA capabilities.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When add_port() is done for port == 0, it indicates that ports hardware
counters initialization should be skipped. Reflect so in the comment.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ib_register_device() does several allocation and initialization
steps. Split it into smaller more readable functions for easy
review and maintenance.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If port pkey list initialization fails, free the port_immutable memory
during cleanup path. Currently it is missed out.
If cache setup fails, free the pkey list during cleanup path.
Fixes: d291f1a65 ("IB/core: Enforce PKey security on QPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The WARN_ON() is pointless as the rport is placed in SDEV_TRANSPORT_OFFLINE
at that time, so no new commands can be submitted via srp_queuecommand()
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Requester scatter to CQE is restricted to QPs configured to signal
all WRs.
This patch adds ability to enable scatter to cqe (force enable)
in the requester without sig_all, for users who do not want all WRs
signaled but rather just the ones whose data found in the CQE.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Flags sent down from user might not be supported by
running driver.
This might lead to unwanted bugs.
To solve this, added macro to test for unsupported flags.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Scatter to CQE is a HW offload that saves PCI writes by scattering the
payload to the CQE.
This patch extends already existing functionality to support DC
transport type.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use rdma_set_device_sysfs_group() to register device attributes and
simplify the driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clang warns when an emumerated type is implicitly converted to another.
drivers/infiniband/sw/rxe/rxe.c:106:27: warning: implicit conversion
from enumeration type 'enum rxe_device_param' to different enumeration
type 'enum ib_atomic_cap' [-Wenum-conversion]
rxe->attr.atomic_cap = RXE_ATOMIC_CAP;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:131:22: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_port_state' [-Wenum-conversion]
port->attr.state = RXE_PORT_STATE;
~ ^~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:132:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.max_mtu = RXE_PORT_MAX_MTU;
~ ^~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:133:27: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
port->attr.active_mtu = RXE_PORT_ACTIVE_MTU;
~ ^~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/rxe/rxe.c:151:24: warning: implicit conversion
from enumeration type 'enum rxe_port_param' to different enumeration
type 'enum ib_mtu' [-Wenum-conversion]
ib_mtu_enum_to_int(RXE_PORT_ACTIVE_MTU);
~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~
5 warnings generated.
Use the appropriate values from the expected enumerated type so no
conversion needs to happen then remove the unneeded definitions.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IDA adds overhead to store IDs bitmap with maximal value of IDA
can be upto 2099202 (IDA_MAX = 0x80000000U / IDA_BITMAP_BITS - 1).
However, there is no need to add such enormous number of devices
and it is enough for now to limit it to be 8192.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add said information and make the debug print format consistent.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Normally kobj objects have kobj suffix to reflect it.
Rename ports_parent to ports_kobj.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.
Fixes: 35c4cbb178 ("IB/core: Create get_perf_mad function in sysfs.c")
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iov sysfs tree is created under ib device at
/sys/class/infiniband/mlx4_0/iov.
And,
ibdev->ports_parent->parent = &ibdev->dev.
Therefore, refer to device's kobject directly instead of
indirect access to it.
Additionally, iov entries are created under device kobject and deleted
before device is removed. There is no need to hold additional reference
to device kobject in provider driver.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Provide an option to rename IB device name through RDMA netlink and
limit it to users with ADMIN capability only.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ucma users supply timeout in u32 format, it means that any number
with most significant bit set will be converted to negative value
by various rdma_*, cma_* and sa_query functions, which treat timeout
as int.
In the lowest level, the timeout is converted back to be unsigned long.
Remove this ambiguous conversion by updating all function signatures to
receive unsigned long.
Reported-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch changes the small number of functions to be aligned to kernel
coding style. It is needed to minimize the diffstat of the following
patch. It doesn't change any functionality.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
cma_resolve_iw_route() doesn't use timeout_ms parameter, so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucma.c:1686 ucma_write() warn: potential
spectre issue 'ucma_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
hdr.cmd can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/infiniband/core/ucm.c:1127 ib_ucm_write() warn: potential
spectre issue 'ucm_cmd_table' [r] (local cap)
Fix this by sanitizing hdr.cmd before using it to index
ucm_cmd_table.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Schedule MR cache work only after bucket was initialized.
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42df ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IPCB should be cleared before icmp_send, since it may contain data from
previous layers and the data could be misinterpreted as ip header options,
which later caused the ihl to be set to an invalid value and resulted in
the following stack corruption:
[ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping
[ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping
[ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping
[ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping
[ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping
[ 1083.034387] ==================================================================
[ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310
[ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7
[ 1083.034990]
[ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1
[ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib]
[ 1083.035750] Call Trace:
[ 1083.035888] dump_stack+0x9a/0xeb
[ 1083.036031] print_address_description+0xe3/0x2e0
[ 1083.036213] kasan_report+0x18a/0x2e0
[ 1083.036356] ? __ip_options_echo+0xf08/0x1310
[ 1083.036522] __ip_options_echo+0xf08/0x1310
[ 1083.036688] icmp_send+0x7b9/0x1cd0
[ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070
[ 1083.037018] ? netif_schedule_queue+0x5/0x200
[ 1083.037180] ? debug_show_all_locks+0x310/0x310
[ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120
[ 1083.037519] ? debug_locks_off+0x11/0x80
[ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6
[ 1083.037841] ? check_flags.part.27+0x450/0x450
[ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6
[ 1083.038169] ? debug_locks_off+0x11/0x80
[ 1083.038318] ? skb_dequeue+0x10e/0x1a0
[ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib]
[ 1083.038642] ? netif_schedule_queue+0xa8/0x200
[ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib]
[ 1083.039174] process_one_work+0x912/0x1830
[ 1083.039336] ? wq_pool_ids_show+0x310/0x310
[ 1083.039491] ? lock_acquire+0x145/0x3a0
[ 1083.042312] worker_thread+0x87/0xbb0
[ 1083.045099] ? process_one_work+0x1830/0x1830
[ 1083.047865] kthread+0x322/0x3e0
[ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0
[ 1083.053354] ret_from_fork+0x3a/0x50
For instance __ip_options_echo is failing to proceed with invalid srr and
optlen passed from another layer via IPCB
[ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0
[ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533
[ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84
[ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0
[ 762.140269] ==================================================================
[ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0
[ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680
[ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Erez Shitrit <erezsh@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A user can provide a hint which will be attached to the packet and written
to the CQE on receive. This can be used as a way to offload operations
into the HW, for example parsing a packet which is a tunneled packet, and
if so, pass 0x1 as the hint. The software can use that hint to decapsulate
the packet and parse only the inner headers thus saving CPU cycles.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove double error check from create user RQ error flow.
Fixes: 79b20a6c30 ("IB/mlx5: Add receive Work Queue verbs")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Verify that the input DEVX object type matches the created object.
As the obj_id in the firmware is not globally unique the object type must
be considered upon checking for a valid object id.
Once both the type and the id match we know that the lock was taken on the
correct object by the uverbs layer.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch adds fast register physical memory region (FRMR) support for
hip08.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In case the NQ alloc/enable fails, free up the already allocated/enabled
NQ before reporting failure. Also, track the alloc/enable using proper
state checking.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Delayed work bnxt_re_worker would be still running even after
cancel_delayed_work returns. This causes crash as the driver proceeds with
device removal. To make sure that the work is finished before returning,
use cancel_delayed_work_sync.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose out of sequence errors received from FW. This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the previous
value for calculating the difference in the next query.
Also, update the HW statistics structure with new fields.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the RoCE discard and drop counters from the HW statistics context
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
crsqe->resp would be NULL in case the host command timed out before
getting a response from HW. Check for NULL pointer to avoid a potential
crash while printing the error message.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some FW versions, RoCE driver also receives an async notification which
was directed to L2 driver. RoCE driver does not handle this and print a
message to syslog. Drop these notifications silently.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the failure path, nq->bar_reg_iomem gets accessed without
initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the
initialization is complete.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Fixes: 6e04b10356 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is reported by smatch check. rcfw->creq_bar_reg_iomem is accessed in
bnxt_qplib_rcfw_stop_irq and this variable check afterwards doesn't make
sense. Also, rcfw->creq_bar_reg_iomem will never be NULL. So Removing
this check.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6e04b10356 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Version macro is not required as the driver is not maintaining the
version. Removing the references of this macro too.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add the missing initalization of the cq_lock and qplib.flush_lock.
Fixes: 942c9b6ca8 ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git
This is required to resolve dependencies of the next series of RDMA
patches.
The code motion conflicts in drivers/infiniband/core/cache.c were
resolved.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
IPoIB netlink support and mlx5e pre-allocated netdevice initialization
IP link was broken due to the changes in IPoIB for the rdma_netdev
support after commit cd565b4b51
("IB/IPoIB: Support acceleration options callbacks").
This patchset fixes IPoIB pkey creation and removal using rtnetlink by
adding support in both IPoIB ULP layer and mlx5 layer:
From Jason and Denis:
1) Introduces changes in the RDMA netdev code in order to
allow allocation of the netdev to be done by the rtnl netdev code.
2) Reworks IPoIB initialization to use the two step rdma_netdev
creation.
From Feras and Saeed, mlx5e netdev layer refactoring to allow accepting
pre-allocated netdevs:
3) Adds support to initialize/cleanup netdevs that are not created
by mlx5 driver.
4) Change mlx5e netdevice layer to accept the pre-allocated netdevice
queue number.
5) Initialize mlx5e generic structures in one place to be used for all
netdevs types NIC/representors/IPoIB (both mlx5 allocated and
pre-allocted).
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbvqHhAAoJEEg/ir3gV/o+TRQH+wYWgvi5AbqYlGpT8xSho8Dg
5tuFE9AbYDGLLWptZgtYXsBsTaltGVqKnwWy//dAuuSI7LvqtjeKqq0G1JKau70L
/49+vv8NTQ6vov2yY95yzzEo5B1/zVcYEl9dmJl4y6Xlwc+YIteewReVqRj+tucR
xO7ghLWc1o4Pl7gWBAcOULyOsZc+CtG8ElwEaBROXTtYRpsR7FKn7vN+WdWZ2VOG
MjtCUaG0vZlK1vaF76J3P9bL2V3y6o6i6S8RZwg1kPxO4jnrzyGrkxWMOX6f32KB
JAUcLVlJW5wckcRAKfTwLxsFMrc9vLBPHyj4XneXVWGKh8/dGUGY5gdGIJV5Jlc=
=m0tM
-----END PGP SIGNATURE-----
Merge tag 'mlx5e-updates-2018-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-10-10
IPoIB netlink support and mlx5e pre-allocated netdevice initialization
IP link was broken due to the changes in IPoIB for the rdma_netdev
support after commit cd565b4b51
("IB/IPoIB: Support acceleration options callbacks").
This patchset fixes IPoIB pkey creation and removal using rtnetlink by
adding support in both IPoIB ULP layer and mlx5 layer:
From Jason and Denis:
1) Introduces changes in the RDMA netdev code in order to
allow allocation of the netdev to be done by the rtnl netdev code.
2) Reworks IPoIB initialization to use the two step rdma_netdev
creation.
From Feras and Saeed, mlx5e netdev layer refactoring to allow accepting
pre-allocated netdevs:
3) Adds support to initialize/cleanup netdevs that are not created
by mlx5 driver.
4) Change mlx5e netdevice layer to accept the pre-allocated netdevice
queue number.
5) Initialize mlx5e generic structures in one place to be used for all
netdevs types NIC/representors/IPoIB (both mlx5 allocated and
pre-allocted).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts were easy to resolve using immediate context mostly,
except the cls_u32.c one where I simply too the entire HEAD
chunk.
Signed-off-by: David S. Miller <davem@davemloft.net>
We only have one bug to submit this time around. It fixes a DMA unmap
issue where we unmapped the DMA address from the IOMMU before we did
from the card, resulting in a DMAR error with IOMMU enabled, or possible
crash without.
-----BEGIN PGP SIGNATURE-----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=hozJ
-----END PGP SIGNATURE-----
Merge tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Doug writes:
"RDMA fixes:
Final for-rc pull request for 4.19
We only have one bug to submit this time around. It fixes a DMA
unmap issue where we unmapped the DMA address from the IOMMU before
we did from the card, resulting in a DMAR error with IOMMU enabled,
or possible crash without."
* tag 'for-gkh' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/mlx5: Unmap DMA addr from HCA before IOMMU
IPoIB netlink support was broken by the below commit since integrating
the rdma_netdev support relies on an allocation flow for netdevs that
was controlled by the ipoib driver while netdev's rtnl_newlink
implementation assumes that the netdev will be allocated by netlink.
Such situation leads to crash in __ipoib_device_add, once trying to
reuse netlink device.
This patch fixes the kernel oops for both mlx4 and mlx5
devices triggered by the following command:
Fixes: cd565b4b51 ("IB/IPoIB: Support acceleration options callbacks")
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
netdev has several interfaces that expect to call alloc_netdev_mqs from
the core code, with the driver only providing the arguments. This is
incompatible with the rdma_netdev interface that returns the netdev
directly.
Thus re-organize the API used by ipoib so that the verbs core code calls
alloc_netdev_mqs for the driver. This is done by allowing the drivers to
provide the allocation parameters via a 'get_params' callback and then
initializing an allocated netdev as a second step.
Fixes: cd565b4b51 ("IB/IPoIB: Support acceleration options callbacks")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Only some of these were still used by the cxgb4 driver, and that despite
the fact that the driver otherwise uses the generic DMA API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tracking CM_ID resource is performed in two stages: creation of cm_id
and connecting it to the cma_dev. It is needed because rdma-cm protocol
exports two separate user-visible calls rdma_create_id and rdma_accept.
At the time of CM_ID creation, the real owner of that object is unknown
yet and we need to grab task_struct. This task_struct is released or
reassigned in attach phase later on. but call to rdma_destroy_id left
this task_struct unreleased.
Such separation is unique to CM_ID and other restrack objects initialize
in one shot. It means that it is safe to use "res->valid" check to catch
unfinished CM_ID flow and release task_struct for that object.
Fixes: 00313983cd ("RDMA/nldev: provide detailed CM_ID information")
Reported-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Unify task update and kernel name set in one place.
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Prepare rdma_restrack_set_task() call to accommodate more
code by moving its implementation from *.h to *.c.
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe