Commit Graph

101 Commits

Author SHA1 Message Date
Linus Torvalds 3e74683137 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits)
  V4L/DVB (13542): ir-keytable: Allow dynamic table change
  V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage
  V4L/DVB (13540): ir-common: Cleanup get key evdev code
  V4L/DVB (13539): ir-common: add __func__ for debug messages
  V4L/DVB (13538): ir-common: Use a dynamic keycode table
  V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation
  V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller
  V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code
  V4L/DVB (13534): ir-common: Remove some unused fields/structs
  V4L/DVB (13533): ir: use dynamic tables, instead of static ones
  V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table
  V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it
  V4L/DVB (13458): go7007: subdev conversion
  V4L/DVB (13457): s2250: subdev conversion
  V4L/DVB (13456): s2250: Change module structure
  V4L/DVB (13528): em28xx: add support for em2800 VC211A card
  em28xx: don't reduce scale to half size for em2800
  em28xx: don't load audio modules when AC97 is mis-detected
  em28xx: em2800 chips support max width of 640
  V4L/DVB (13523): dvb-bt8xx: fix compile warning
  ...

Fix up trivial conflicts due to spelling fixes from the trivial tree in
	Documentation/video4linux/gspca.txt
	drivers/media/video/cx18/cx18-mailbox.h
2009-12-09 19:50:49 -08:00
Igor M. Liplianin 09ea33e5c6 V4L/DVB (13493): TeVii S470 and TBS 6920 fixes
The new hardware design applied for this cards.
Silicon Labs C8051F300 microcontroller is used for LNB power control.
It connected to cx23885 GPIO pins:
 GPIO0 - P0.3 data
 GPIO1 - P0.2 reset
 GPIO2 - P0.1 clk
 GPIO3 - P0.0 busy
 Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner
and M88DS3000 advanced DVB-S/S2 demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:42:08 -02:00
David T. L. Wong ea5697fe9e V4L/DVB (13375): cx23885: Add support for Mygica X8558Pro DMB-TH
Adds support for cx23885 card Mygica X8558 Pro DMB-TH

Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:34 -02:00
Michael Krufky aee0b24c05 V4L/DVB (13347): cx23885: add digital television support for Hauppauge WinTV-HVR1290
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:27 -02:00
Igor M. Liplianin 29372a8dae V4L/DVB (13336): stv0900: config definition for single/dual mode
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:24 -02:00
Abylay Ospan 9329fb5b73 V4L/DVB (13335): stv0900: fix diseqc support for NetUP card
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:24 -02:00
Abylay Ospan 873688cd30 V4L/DVB (13334): stv6110: add configurable gain
It has positive effect for NetUP Dual DVB-S2 CI card.

Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:23 -02:00
Laurent Pinchart 622b828ab7 V4L/DVB (13238): v4l2_subdev: rename tuner s_standby operation to core s_power
Upcoming I2C v4l2_subdev drivers need a way to control the subdevice
power state from the core. This use case is already partially covered by
the tuner s_standby operation, but no way to explicitly come back from
the standby state is available.

Rename the tuner s_standby operation to core s_power, and fix tuner
drivers accordingly. The tuner core will call s_power(0) instead of
s_standby(). No explicit call to s_power(1) is required for tuners as
they are supposed to wake up from standby automatically.

[mchehab@redhat.com: CodingStyle fix]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:41:03 -02:00
David T.L. Wong 6f0d8c020e V4L/DVB (13211): cx23885: card Mygica X8506 analog TV support
Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:54 -02:00
Michael Krufky 5bdd39621e V4L/DVB (13104): cx23885: define a dvb frontend ioctl override function
override set_frontend to allow rf input path switching on the HVR1275

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:22 -02:00
Michael Krufky 9133aee09e V4L/DVB (13103): create a standard method for dvb adapter drivers to override frontend ioctls
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05 18:40:21 -02:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Vladimir Geroy 34e383dd13 V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only)
Adding Compro VideoMate E800 (DVB-T part only)

Cc: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Vladimir Geroy <geroin22@yandex.ru>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:53:06 -03:00
Michael Krufky 04a68baa20 V4L/DVB (12875): cx23885: disable tda18271 slave tuner output / loop thru in standby mode
Enable the standby mode optimization to disable the tda18271
slave tuner output / loop thru options when in low power mode

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-19 00:13:59 -03:00
Abylay Ospan 644c7ef0b9 V4L/DVB (12311): Change clocking configuration and frequency for NetUP card.
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:18:02 -03:00
Igor M. Liplianin ee5e7d94c9 V4L/DVB (12310): stv6110 tuner: remove unused iq_wiring configuration parameter.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:18:02 -03:00
Steven Toth 1369738023 V4L/DVB (12306): cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850
cx23885: Add support for ATSC/QAM on Hauppauge HVR-1850

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:17:57 -03:00
David Wong 2365b2d307 V4L/DVB (12272): cx23885: add card Magic-Pro ProHDTV Extreme 2
cx23885: add card Magic-Pro  ProHDTV Extreme 2 PCI-E.

Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-09-12 12:17:39 -03:00
Michael Krufky b179bc4579 V4L/DVB (12166): cx23885: add FIXME comment above set_frontend override
add FIXME comment to indicate that the set_frontend override is a
temporary hack.  This will be done a better way in the next kernel.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:01 -03:00
Michael Krufky f35b9e8039 V4L/DVB (12165): cx23885: override set_frontend to allow rf input path switching on the HVR1275
Use separate RF input spigots for Antennae and Cable.

Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:01 -03:00
Michael Krufky b34cdc36c4 V4L/DVB (12116): cx23885: ensure correct IF freq is used on HVR1200 & HVR1700
Ensure that we're programming the tda18271 tuner with the correct
IF frequencies to match the programming of the TDA10048 DVB-T demod
for the HVR1200 and HVR1700 products.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:14:58 -03:00
Igor M. Liplianin f867c3f4ea V4L/DVB (12098): Create table for customize stv0900 ts registers.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:14:12 -03:00
Igor M. Liplianin 0cde9b2533 V4L/DVB (12095): Change lnbh24 configure bits for NetUP card.
Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-23 03:13:59 -03:00
David Wong 493b7127aa V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH
This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Michael Krufky c27586e4d6 V4L/DVB (11858): cx23885: fix tda10048 IF frequencies for the Hauppauge WinTV-HVR1210
Steve missed the HVR1210 config struct for the TDA10048 in his IF freq patch.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Steven Toth 8816bef53c V4L/DVB (11855): cx23885: Ensure we specify I/F's for all bandwidths
cx23885: Ensure we specify I/F's for all bandwidths

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Michael Krufky 247bc54053 V4L/DVB (11773): cx23885: clean up struct names for Hauppauge WinTV-HVR127X devices
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 6b926eca98 V4L/DVB (11771): cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 19bc57968c V4L/DVB (11770): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1255
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Michael Krufky d099becb0b V4L/DVB (11769): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1275
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Michael Krufky a5dbf45766 V4L/DVB (11768): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1270
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Steven Toth 484d9e0577 V4L/DVB (11698): cx23885: For tda10048 boards ensure we specify the I/F
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Steven Toth 52c3d29cfa V4L/DVB (11664): cx23885: Frontend wasn't locking on HVR-1500
The boards control struct wasn't updated when (presumably) all of the
other drivers migrated from using scode_table to specifying the demod.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09 18:52:19 -03:00
Christopher Pascoe d4dc673da9 V4L/DVB (11626): cx23885: Two fixes for DViCO FusionHDTV DVB-T Dual Express
Two fixes for DViCO FusionHDTV DVB-T Dual Express:

 * Reset correct tuner when reinitializing xc3028.
 * Disable the I2C gate control to avoid locking up the I2C bus.

Tested-by: John Knops <jknops@australiaonline.net.au>
Reviewed-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Christopher Pascoe <linuxdvb@itee.uq.edu.au>
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29 16:00:38 -03:00
Hans Verkuil 7c9fc9d50f V4L/DVB (11368): v4l2-subdev: move s_standby from core to tuner.
s_standby is only used to put the tuner in powersaving mode, so move it
from core to tuner.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-06 21:44:20 -03:00
Hans Verkuil 0d5a19f158 V4L/DVB (11297): cx23885: convert to v4l2_subdev.
Convert this driver to v4l2_subdev. Note that currently the only card with
analog support in this driver is the HVR-1800. The analog tuner support in
this driver is limited to what is needed for this board. When analog support
is added for other cards, then the tuner load code will probably have to be
expanded to take care of those boards. For example, there is currently no
support for either radio tuners or tda9887 demods.

I'd like to thank Steven Toth for testing this on his HVR-1800.

Tested-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:48 -03:00
Hans Verkuil afd96668d8 V4L/DVB (10987): cx23885: fix crash on non-netup cards
The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the
existing boards. Interrupts for the netup part were enabled and handled
without testing whether the current board actually had a netup -> instant
and fatal crash.

I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI
board.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:20 -03:00
Igor M. Liplianin 5a23b0762c V4L/DVB (10805): Add support for NetUP Dual DVB-S2 CI card
Add support for NetUP Dual DVB-S2 CI card
The card based on cx23885 PCI-e bridge, CiMax SP2 Common Interface chips,
STM lnbh24 LNB power chip, stv6110 tuners and stv0900 demodulator.
http://www.linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI

Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:43:05 -03:00
Igor M. Liplianin c9b8b04b26 V4L/DVB (10269): Add support for DVBWorld DVBS2 PCI-e 2005.
DVBWorld DVBS2 PCI-e 2005 card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/DVBWorld_DVB-S2_2005_PCI-Express_Card
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:24 -03:00
Igor M. Liplianin 579943f548 V4L/DVB (10267): Add support for TeVii S470 DVB-S2 PCI-e card.
TeVii S470 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TeVii_S470
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Igor M. Liplianin 96318d0cca V4L/DVB (10266): Add support for TurboSight TBS6920 DVB-S2 PCI-e card.
TurboSight TBS6920 DVB-S2 PCI-e card contains cx23885 PCI-e bridge
and cx24116 demodulator.
http://www.linuxtv.org/wiki/index.php/TBS_6920
The card tested by me (Igor).

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30 12:42:23 -03:00
Igor M. Liplianin 9bb1b7e879 V4L/DVB (9795): Add Compro VideoMate E650F (DVB-T part only).
Add Compro VideoMate E650F (DVB-T part only).
The card based on cx23885 PCI-Express chip, xc3028 tuner and ce6353 demodulator.

Cc: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:38:25 -02:00
Darron Broad 96b7a1a838 V4L/DVB (9271): videobuf: data storage optimisation (2)
To optimise data storage even further one other redundant
var has been removed.

This also removes a redundant assignment.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:29:59 -03:00
Steven Toth 9c8ced511e V4L/DVB (9251): cx23885: Checkpatch compliance
cx23885: Checkpatch compliance

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:27:23 -03:00
Steven Toth eb0c58bb13 V4L/DVB (9232): cx23885: Move the MFE frontend allocation into the correct place
cx23885 frontend allocation code needs to exist in the higher function,
and it also needs to ensure videobug is also correctly initialised
on a per frontend basis. This code uses the previous num_frontends
patch to safely init each future MFE frontend on a single tsport as
as safely as possible - given that we don't have any of those boards.
Again, better to add all of this safety code now, while the MFE patch
set is fresh in everyone mind, than to try and add it 12-24 months from
now, when the subject is cold.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:24:43 -03:00
Steven Toth d782ffa24f V4L/DVB (9230): cx23885: MFE related OOPS fix
Bug: the tree generated an oops when the cx23885 was laoded. This avoids
the oops by ensuring the mutex is correctly initialised before it's used.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:24:32 -03:00
Darron Broad 59b1842da1 V4L/DVB (9227): MFE: Add multi-frontend mutual exclusion
This add frontend R/W mutual exclusion.
Prior to this point in time it was possible to open both
frontends simultaneously which an MFE card cannot support.

In order to stop this, a delayed open is performed which
has the following function:

-  Return EBUSY after a configurable amount of time
   if a frontend is unavailable due to the other being
   in use.

-  Only allow opening of a frontend if the kernel thread
   of the other has stopped.

This solution was chosen to allow switching between
frontends to work as seamlessly as possible. When both
frontends are actually opened simultaneously then one
will only open, but if quick switching is performed
between one of many then the new open will succeed in
a clean fashion rather than interrupting a kernel
thread.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:24:15 -03:00
Darron Broad f972e0bd93 V4L/DVB (9224): MFE: bugfix: add missing frontend allocation
When using MFE on a setup with both and HVR-3000 and ASUS P7131
card it was noticed that frontend allocation for saa7134
adapters was missing. This patch adds that allocation for
both saa7134 and cx23885 adapters.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:23:21 -03:00
Darron Broad 92abe9ee37 V4L/DVB (9223): MFE: Fix a number of bugs and some tidying up
A number of reference to videobuf_dvb_get_frontend used an invalid
index. This has been fixed.

The section for the HVR3000 in advise_acquire was redundant as
the same logic is used on the HVR4000. This has been removed
and both cards now use the same function.

A number of small errors and whitespace errors are also fixed.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:23:15 -03:00
Steven Toth 363c35fc44 V4L/DVB (9222): S2API: Add Multiple-frontend on a single adapter support.
A detailed description from the original patches 2 years ago:

"The WinTV-HVR3000 has a single transport bus which is shared between
a DVB-T and DVB-S modulator. These patches build on the bus acquisition
cx88 work from a few weeks ago to add support for this.

So to applications the HVR3000 looks like this:
/dev/dvb/adapter0/fe0 (cx24123 DVB-S demod)
/dev/dvb/adapter0/fe1 (cx22702 DVB-T demod)

Additional boards continue as before, eg:
/dev/dvb/adapter1/fe0 (lgdt3302 ATSC demod)

The basic change is removing the single instance of the videobuf_dvb in
cx8802_dev and saa7134_dev(?) and replacing it with a list and some
supporting functions.

*NOTE* This branch was taken before v4l-dvb was closed for 2.6.19 so
two or three current cx88 patches appear to be reversed by this tree,
this will be cleaned up in the near future. The patches missing change
the mutex handing to core->lock, fix an enumeration problem."

It should be recognised that a number of people have been maintaining
this patchset. Significant levels of Kudos to everyone one involved,
including but not limited to:

Darron Broad
Fabio M. Di Nitto
Carlo Scarfoglio
Hans Werner

Without the work of these people, and countless others, my two year old
patches would of died on the Mercurial linuxtv.org vine a long time
ago.

TODO: Revise these patches a little further so that the need for
demux1 and dvr0 is optional, not mandatory on the HVR3000.

HISTORY (darron):
This is the last update to MFE prepared by Hans which is based
upon the `scratchpad' diff created by Carlo.
All MFE work prior to that point must be attributed to Fabio
who ported and maintained Steve's original patch up to that
time.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17 17:23:10 -03:00