Commit Graph

8907 Commits

Author SHA1 Message Date
Linus Torvalds 133d970e0d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main MIPS pull request for 4.9:

  MIPS core arch code:
   - traps: 64bit kernels should read CP0_EBase 64bit
   - traps: Convert ebase to KSEG0
   - c-r4k: Drop bc_wback_inv() from icache flush
   - c-r4k: Split user/kernel flush_icache_range()
   - cacheflush: Use __flush_icache_user_range()
   - uprobes: Flush icache via kernel address
   - KVM: Use __local_flush_icache_user_range()
   - c-r4k: Fix flush_icache_range() for EVA
   - Fix -mabi=64 build of vdso.lds
   - VDSO: Drop duplicated -I*/-E* aflags
   - tracing: move insn_has_delay_slot to a shared header
   - tracing: disable uprobe/kprobe on compact branch instructions
   - ptrace: Fix regs_return_value for kernel context
   - Squash lines for simple wrapper functions
   - Move identification of VP(E) into proc.c from smp-mt.c
   - Add definitions of SYNC barrierstype values
   - traps: Ensure full EBase is written
   - tlb-r4k: If there are wired entries, don't use TLBINVF
   - Sanitise coherentio semantics
   - dma-default: Don't check hw_coherentio if device is non-coherent
   - Support per-device DMA coherence
   - Adjust MIPS64 CAC_BASE to reflect Config.K0
   - Support generating Flattened Image Trees (.itb)
   - generic: Introduce generic DT-based board support
   - generic: Convert SEAD-3 to a generic board
   - Enable hardened usercopy
   - Don't specify STACKPROTECTOR in defconfigs

  Octeon:
   - Delete dead code and files across the platform.
   - Change to use all memory into use by default.
   - Rename upper case variables in setup code to lowercase.
   - Delete legacy hack for broken bootloaders.
   - Leave maintaining the link state to the actual ethernet/PHY drivers.
   - Add DTS for D-Link DSR-500N.
   - Fix PCI interrupt routing on D-Link DSR-500N.

  Pistachio:
   - Remove ANDROID_TIMED_OUTPUT from defconfig

  TX39xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  TX49xx:
   - Move GPIO setup from .mem_setup() to .arch_init()
   - Convert to Common Clock Framework

  txx9wdt:
   - Add missing clock (un)prepare calls for CCF

  BMIPS:
   - Add PW, GPIO SDHCI and NAND device node names
   - Support APPENDED_DTB
   - Add missing bcm97435svmb to DT_NONE
   - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom
   - Add DT examples for BCM63268, BCM3368 and BCM6362
   - Add support for BCM3368 and BCM6362

  PCI
   - Reduce stack frame usage
   - Use struct list_head lists
   - Support for CONFIG_PCI_DOMAINS_GENERIC
   - Make pcibios_set_cache_line_size an initcall
   - Inline pcibios_assign_all_busses
   - Split pci.c into pci.c & pci-legacy.c
   - Introduce CONFIG_PCI_DRIVERS_LEGACY
   - Support generic drivers

  CPC
   - Convert bare 'unsigned' to 'unsigned int'
   - Avoid lock when MIPS CM >= 3 is present

  GIC:
   - Delete unused file smp-gic.c

  mt7620:
   - Delete unnecessary assignment for the field "owner" from PCI

  BCM63xx:
   - Let clk_disable() return immediately if clk is NULL

  pm-cps:
   - Change FSB workaround to CPU blacklist
   - Update comments on barrier instructions
   - Use MIPS standard lightweight ordering barrier
   - Use MIPS standard completion barrier
   - Remove selection of sync types
   - Add MIPSr6 CPU support
   - Support CM3 changes to Coherence Enable Register

  SMP:
   - Wrap call to mips_cpc_lock_other in mips_cm_lock_other
   - Introduce mechanism for freeing and allocating IPIs

  cpuidle:
   - cpuidle-cps: Enable use with MIPSr6 CPUs.

  SEAD3:
   - Rewrite to use DT and generic kernel feature.

  USB:
   - host: ehci-sead3: Remove SEAD-3 EHCI code

  FBDEV:
   - cobalt_lcdfb: Drop SEAD3 support

  dt-bindings:
   -  Document a binding for simple ASCII LCDs

  auxdisplay:
   - img-ascii-lcd: driver for simple ASCII LCD displays

  irqchip i8259:
   - i8259: Add domain before mapping parent irq
   - i8259: Allow platforms to override poll function
   - i8259: Remove unused i8259A_irq_pending

  Malta:
   - Rewrite to use DT

  of/platform:
   - Probe "isa" busses by default

  CM:
   - Print CM error reports upon bus errors

  Module:
   - Migrate exception table users off module.h and onto extable.h
   - Make various drivers explicitly non-modular:
   - Audit and remove any unnecessary uses of module.h

  mailmap:
   - Canonicalize to Qais' current email address.

  Documentation:
   - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API

  Loongson1C:
   - Add CPU support for Loongson1C
   - Add board support
   - Add defconfig
   - Add RTC support for Loongson1C board

  All this except one Documentation fix has sat in linux-next and has
  survived Imagination's automated build test system"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits)
  Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API
  MIPS: ptrace: Fix regs_return_value for kernel context
  MIPS: VDSO: Drop duplicated -I*/-E* aflags
  MIPS: Fix -mabi=64 build of vdso.lds
  MIPS: Enable hardened usercopy
  MIPS: generic: Convert SEAD-3 to a generic board
  MIPS: generic: Introduce generic DT-based board support
  MIPS: Support generating Flattened Image Trees (.itb)
  MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
  MIPS: Print CM error reports upon bus errors
  MIPS: Support per-device DMA coherence
  MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
  MIPS: Sanitise coherentio semantics
  MIPS: PCI: Support generic drivers
  MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
  MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
  MIPS: PCI: Inline pcibios_assign_all_busses
  MIPS: PCI: Make pcibios_set_cache_line_size an initcall
  MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
  MIPS: PCI: Use struct list_head lists
  ...
2016-10-15 09:26:12 -07:00
Ralf Baechle 11ed3e0ef3 MIPS: Wire up new pkey_{mprotect,alloc,free} syscalls
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14380/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-14 11:05:13 -07:00
Marcin Nowakowski 74f1077b5b MIPS: ptrace: Fix regs_return_value for kernel context
Currently regs_return_value always negates reg[2] if it determines
the syscall has failed, but when called in kernel context this check is
invalid and may result in returning a wrong value.

This fixes errors reported by CONFIG_KPROBES_SANITY_TEST

Fixes: d7e7528bcd ("Audit: push audit success and retcode into arch ptrace.h")
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 3.3+
Patchwork: https://patchwork.linux-mips.org/patch/14381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-12 14:34:45 +02:00
Linus Torvalds 4cdf8dbe2d Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal
2016-10-11 23:38:39 -07:00
Masahiro Yamada 97139d4a6f treewide: remove redundant #include <linux/kconfig.h>
Kernel source files need not include <linux/kconfig.h> explicitly
because the top Makefile forces to include it with:

  -include $(srctree)/include/linux/kconfig.h

This commit removes explicit includes except the following:

  * arch/s390/include/asm/facilities_src.h
  * tools/testing/radix-tree/linux/kernel.h

These two are used for host programs.

Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Hidehiro Kawai 54c721b857 mips/panic: replace smp_send_stop() with kdump friendly version in panic path
Daniel Walker reported problems which happens when
crash_kexec_post_notifiers kernel option is enabled
(https://lkml.org/lkml/2015/6/24/44).

In that case, smp_send_stop() is called before entering kdump routines
which assume other CPUs are still online.  As the result, kdump
routines fail to save other CPUs' registers.  Additionally for MIPS
OCTEON, it misses to stop the watchdog timer.

To fix this problem, call a new kdump friendly function,
crash_smp_send_stop(), instead of the smp_send_stop() when
crash_kexec_post_notifiers is enabled.  crash_smp_send_stop() is a
weak function, and it just call smp_send_stop().  Architecture
codes should override it so that kdump can work appropriately.
This patch provides MIPS version.

Fixes: f06e5153f4 (kernel/panic.c: add "crash_kexec_post_notifiers" option)
Link: http://lkml.kernel.org/r/20160810080950.11028.28000.stgit@sysi4-13.yrl.intra.hitachi.co.jp
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Reported-by: Daniel Walker <dwalker@fifo99.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: "Steven J. Hill" <steven.hill@cavium.com>
Cc: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:32 -07:00
James Hogan 9445622cfb MIPS: VDSO: Drop duplicated -I*/-E* aflags
The aflags-vdso is based on ccflags-vdso, which already contains the -I*
and -EL/-EB flags from KBUILD_CFLAGS, but those flags are needlessly
added again to aflags-vdso.

Drop the duplication.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reported-by: Maciej W. Rozycki <macro@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14369/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-11 15:07:30 +02:00
James Hogan 034827c727 MIPS: Fix -mabi=64 build of vdso.lds
The native ABI vDSO linker script vdso.lds is built by preprocessing
vdso.lds.S, with the native -mabi flag passed in to get the correct ABI
definitions. Unfortunately however certain toolchains choke on -mabi=64
without a corresponding compatible -march flag, for example:

cc1: error: ‘-march=mips32r2’ is not compatible with the selected ABI
scripts/Makefile.build:338: recipe for target 'arch/mips/vdso/vdso.lds' failed

Fix this by including ccflags-vdso in the KBUILD_CPPFLAGS for vdso.lds,
which includes the appropriate -march flag.

Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Maciej W. Rozycki <macro@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/14368/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-11 15:03:47 +02:00
Linus Torvalds 93c26d7dc0 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull protection keys syscall interface from Thomas Gleixner:
 "This is the final step of Protection Keys support which adds the
  syscalls so user space can actually allocate keys and protect memory
  areas with them. Details and usage examples can be found in the
  documentation.

  The mm side of this has been acked by Mel"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pkeys: Update documentation
  x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
  x86/pkeys: Fix pkeys build breakage for some non-x86 arches
  x86/pkeys: Add self-tests
  x86/pkeys: Allow configuration of init_pkru
  x86/pkeys: Default to a restrictive init PKRU
  pkeys: Add details of system call use to Documentation/
  generic syscalls: Wire up memory protection keys syscalls
  x86: Wire up protection keys system calls
  x86/pkeys: Allocation/free syscalls
  x86/pkeys: Make mprotect_key() mask off additional vm_flags
  mm: Implement new pkey_mprotect() system call
  x86/pkeys: Add fault handling for PF_PK page fault bit
2016-10-10 11:01:51 -07:00
Paul Burton cabca8c098 MIPS: Enable hardened usercopy
Enable CONFIG_HARDENED_USERCOPY checks for MIPS, calling check_object
size in all of copy_{to,from}_user(), __copy_{to,from}_user() &
__copy_{to,from}_user_inatomic().

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14371/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-10 15:28:53 +02:00
Marcin Nowakowski ea036230f7 uprobes: remove function declarations from arch/{mips,s390}
The declarations of arch-specific functions have been moved to a common
header in commit 3820b4d278 ('uprobes: Move function declarations out
of arch'), but MIPS and S390 has added them to their own trees later.
Remove the unnecessary duplicates.

Link: http://lkml.kernel.org/r/1472804384-17830-1-git-send-email-marcin.nowakowski@imgtec.com
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Chris Metcalf 6727ad9e20 nmi_backtrace: generate one-line reports for idle cpus
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative.  Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".

We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.

This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.

Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Chris Metcalf 9a01c3ed5c nmi_backtrace: add more trigger_*_cpu_backtrace() methods
Patch series "improvements to the nmi_backtrace code" v9.

This patch series modifies the trigger_xxx_backtrace() NMI-based remote
backtracing code to make it more flexible, and makes a few small
improvements along the way.

The motivation comes from the task isolation code, where there are
scenarios where we want to be able to diagnose a case where some cpu is
about to interrupt a task-isolated cpu.  It can be helpful to see both
where the interrupting cpu is, and also an approximation of where the
cpu that is being interrupted is.  The nmi_backtrace framework allows us
to discover the stack of the interrupted cpu.

I've tested that the change works as desired on tile, and build-tested
x86, arm, mips, and sparc64.  For x86 I confirmed that the generic
cpuidle stuff as well as the architecture-specific routines are in the
new cpuidle section.  For arm, mips, and sparc I just build-tested it
and made sure the generic cpuidle routines were in the new cpuidle
section, but I didn't attempt to figure out which the platform-specific
idle routines might be.  That might be more usefully done by someone
with platform experience in follow-up patches.

This patch (of 4):

Currently you can only request a backtrace of either all cpus, or all
cpus but yourself.  It can also be helpful to request a remote backtrace
of a single cpu, and since we want that, the logical extension is to
support a cpumask as the underlying primitive.

This change modifies the existing lib/nmi_backtrace.c code to take a
cpumask as its basic primitive, and modifies the linux/nmi.h code to use
the new "cpumask" method instead.

The existing clients of nmi_backtrace (arm and x86) are converted to
using the new cpumask approach in this change.

The other users of the backtracing API (sparc64 and mips) are converted
to use the cpumask approach rather than the all/allbutself approach.
The mips code ignored the "include_self" boolean but with this change it
will now also dump a local backtrace if requested.

Link: http://lkml.kernel.org/r/1472487169-14923-2-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Vineet Gupta 51a021244b atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
This came to light when implementing native 64-bit atomics for ARCv2.

The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
to check whether atomic64_dec_if_positive() is available.  It seems it
was needed when not every arch defined it.  However as of current code
the Kconfig option seems needless

 - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a
   generic definition of API is present lib/atomic64.c
 - arches with native 64-bit atomics select it in arch/*/Kconfig and
   define the API in their headers

So I see no point in keeping the Kconfig option

Compile tested for:
 - blackfin (CONFIG_GENERIC_ATOMIC64)
 - x86 (!CONFIG_GENERIC_ATOMIC64)
 - ia64

Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Ming Lin <ming.l@ssi.samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Baoyou Xie 08ea8c07fb mm: move phys_mem_access_prot_allowed() declaration to pgtable.h
We get 1 warning when building kernel with W=1:

  drivers/char/mem.c:220:12: warning: no previous prototype for 'phys_mem_access_prot_allowed' [-Wmissing-prototypes]
   int __weak phys_mem_access_prot_allowed(struct file *file,

In fact, its declaration is spreading to several header files in
different architecture, but need to be declare in common header file.

So this patch moves phys_mem_access_prot_allowed() to pgtable.h.

Link: http://lkml.kernel.org/r/1473751597-12139-1-git-send-email-baoyou.xie@linaro.org
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:29 -07:00
Linus Torvalds 6218590bcb KVM updates for v4.9-rc1
All architectures:
   Move `make kvmconfig` stubs from x86;  use 64 bits for debugfs stats.
 
 ARM:
   Important fixes for not using an in-kernel irqchip; handle SError
   exceptions and present them to guests if appropriate; proxying of GICV
   access at EL2 if guest mappings are unsafe; GICv3 on AArch32 on ARMv8;
   preparations for GICv3 save/restore, including ABI docs; cleanups and
   a bit of optimizations.
 
 MIPS:
   A couple of fixes in preparation for supporting MIPS EVA host kernels;
   MIPS SMP host & TLB invalidation fixes.
 
 PPC:
   Fix the bug which caused guests to falsely report lockups; other minor
   fixes; a small optimization.
 
 s390:
   Lazy enablement of runtime instrumentation; up to 255 CPUs for nested
   guests; rework of machine check deliver; cleanups and fixes.
 
 x86:
   IOMMU part of AMD's AVIC for vmexit-less interrupt delivery; Hyper-V
   TSC page; per-vcpu tsc_offset in debugfs; accelerated INS/OUTS in
   nVMX; cleanups and fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJX9iDrAAoJEED/6hsPKofoOPoIAIUlgojkb9l2l1XVDgsXdgQL
 sRVhYSVv7/c8sk9vFImrD5ElOPZd+CEAIqFOu45+NM3cNi7gxip9yftUVs7wI5aC
 eDZRWm1E4trDZLe54ZM9ThcqZzZZiELVGMfR1+ZndUycybwyWzafpXYsYyaXp3BW
 hyHM3qVkoWO3dxBWFwHIoO/AUJrWYkRHEByKyvlC6KPxSdBPSa5c1AQwMCoE0Mo4
 K/xUj4gBn9eMelNhg4Oqu/uh49/q+dtdoP2C+sVM8bSdquD+PmIeOhPFIcuGbGFI
 B+oRpUhIuntN39gz8wInJ4/GRSeTuR2faNPxMn4E1i1u4LiuJvipcsOjPfe0a18=
 =fZRB
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "All architectures:
   - move `make kvmconfig` stubs from x86
   - use 64 bits for debugfs stats

  ARM:
   - Important fixes for not using an in-kernel irqchip
   - handle SError exceptions and present them to guests if appropriate
   - proxying of GICV access at EL2 if guest mappings are unsafe
   - GICv3 on AArch32 on ARMv8
   - preparations for GICv3 save/restore, including ABI docs
   - cleanups and a bit of optimizations

  MIPS:
   - A couple of fixes in preparation for supporting MIPS EVA host
     kernels
   - MIPS SMP host & TLB invalidation fixes

  PPC:
   - Fix the bug which caused guests to falsely report lockups
   - other minor fixes
   - a small optimization

  s390:
   - Lazy enablement of runtime instrumentation
   - up to 255 CPUs for nested guests
   - rework of machine check deliver
   - cleanups and fixes

  x86:
   - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery
   - Hyper-V TSC page
   - per-vcpu tsc_offset in debugfs
   - accelerated INS/OUTS in nVMX
   - cleanups and fixes"

* tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits)
  KVM: MIPS: Drop dubious EntryHi optimisation
  KVM: MIPS: Invalidate TLB by regenerating ASIDs
  KVM: MIPS: Split kernel/user ASID regeneration
  KVM: MIPS: Drop other CPU ASIDs on guest MMU changes
  KVM: arm/arm64: vgic: Don't flush/sync without a working vgic
  KVM: arm64: Require in-kernel irqchip for PMU support
  KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register
  KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL
  KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie
  KVM: PPC: BookE: Fix a sanity check
  KVM: PPC: Book3S HV: Take out virtual core piggybacking code
  KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread
  ARM: gic-v3: Work around definition of gic_write_bpr1
  KVM: nVMX: Fix the NMI IDT-vectoring handling
  KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive
  KVM: nVMX: Fix reload apic access page warning
  kvmconfig: add virtio-gpu to config fragment
  config: move x86 kvm_guest.config to a common location
  arm64: KVM: Remove duplicating init code for setting VMID
  ARM: KVM: Support vgic-v3
  ...
2016-10-06 10:49:01 -07:00
Paul Burton 3f5f0a4475 MIPS: generic: Convert SEAD-3 to a generic board
Convert the MIPS SEAD-3 board support to be a generic board, supported
by generic kernels.

Because the SEAD-3 boot protocol was defined long ago and we don't want
to force a switch to the UHI protocol, SEAD-3 is added as a legacy board
which is detected by reading the REVISION register. This may technically
not be a valid memory read & future work will include attempting to
handle that gracefully. In practice since SEAD-3 is the only legacy
board supported by the generic kernel so far the read will only happen
on SEAD-3 boards, and even once Malta is converted the same REVISION
register exists there too. Other boards such as Boston, Ci20 & Ci40 will
use the UHI boot protocol & thus not run any of the legacy board detect
functions.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:04:20 +02:00
Paul Burton eed0eabd12 MIPS: generic: Introduce generic DT-based board support
Introduce a "generic" platform, which aims to be board-agnostic by
making use of device trees passed by the boot protocol defined in the
MIPS UHI (Universal Hosting Interface) specification. Provision is made
for supporting boards which use a legacy boot protocol that can't be
changed, but adding support for such boards or any others is left to
followon patches.

Right now the built kernels expect to be loaded to 0x80100000, ie. in
kseg0. This is fine for the vast majority of MIPS platforms, but
nevertheless it would be good to remove this limitation in the future by
mapping the kernel via the TLB such that it can be loaded anywhere & map
itself appropriately.

Configuration is handled by dynamically generating configs using
scripts/kconfig/merge_config.sh, somewhat similar to the way powerpc
makes use of it. This allows for variations upon the configuration, eg.
differing architecture revisions or subsets of driver support for
differing boards, to be handled without having a large number of
defconfig files.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:04:04 +02:00
Paul Burton cf2a5e0bb4 MIPS: Support generating Flattened Image Trees (.itb)
Add support for generating kernel images in the Flattened Image Tree
(.itb) format as supported by U-Boot. This format is essentially a
Flattened Device Tree binary containing images (kernels, DTBs, ramdisks)
and configurations which link those images together. The big advantages
of FIT images over the uImage format are:

  - We can include FDTs in the kernel image in a way that the bootloader
    can extract it & manipulate it before providing it to the kernel.
    Thus we can ship FDTs as part of the kernel giving us the advantages
    of being able to develop & maintain the DT within the kernel tree,
    but also have the benefits of the bootloader being able to
    manipulate the FDT. Example uses for this would be to inject the
    kernel command line into the chosen node, or to fill in the correct
    memory size.

  - We can include multiple configurations in a single kernel image.
    This means that a single FIT image can, given appropriate
    bootloaders, be booted on different boards with the bootloader
    selecting an appropriate configuration & providing the correct FDT
    to the kernel.

  - We can support a multitude of hashes over the data.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:03:10 +02:00
Paul Burton 3ffc17d876 MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0
On MIPS64 we define the default CAC_BASE as one of the xkphys regions of
the virtual address space. Since the CCA is encoded in bits 61:59 of
xkphys addresses, fixing CAC_BASE to any particular one prevents us from
dynamically changing the CCA as we do for MIPS32 where CAC_BASE is
placed within kseg0. In order to make the kernel more generic, drop the
current kludge that gives CAC_BASE CCA=3 if CONFIG_DMA_NONCOHERENT is
selected (disregarding CONFIG_DMA_MAYBE_COHERENT) & CCA=5 (which is not
standardised by the architecture) otherwise. Instead read Config.K0 and
generate the appropriate offset into xkphys, presuming that either the
bootloader or early kernel code will have configured Config.K0
appropriately. This seems like the best option for a generic
implementation.

The ip27 spaces.h is adjusted to set its former value of CAC_BASE, since
it's the only user of CAC_BASE from assembly (in its smp_slave_setup
macro). This allows the generic case to focus solely on C code without
breaking ip27.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14351/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:02:35 +02:00
Paul Burton dabdc1853d MIPS: Print CM error reports upon bus errors
If a bus error occurs on a system with a MIPS Coherence Manager (CM)
then the CM may hold useful diagnostic information. Printing this out
has so far been left up to boards, with the requirement that they
register a board_be_handler function & call mips_cm_error_decode() from
there.

In order to avoid boards other than Malta needing to duplicate this
code, call mips_cm_error_decode() automatically if the board registers
no board_be_handler, and remove the Malta implementation of that.

This patch results in no functional change, but removes a further piece
of platform-specific code.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14350/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:02:18 +02:00
Paul Burton 20d330645c MIPS: Support per-device DMA coherence
On some MIPS systems, a subset of devices may have DMA coherent with CPU
caches. For example in systems including a MIPS I/O Coherence Unit
(IOCU), some devices may be connected to that IOCU whilst others are
not.

Prior to this patch, we have a plat_device_is_coherent() function but no
implementation which does anything besides return a global true or
false, optionally chosen at runtime. For devices such as those described
above this is insufficient.

Fix this by tracking DMA coherence on a per-device basis with a
dma_coherent field in struct dev_archdata. Setting this from
arch_setup_dma_ops() takes care of devices which set the dma-coherent
property via device tree, and any PCI devices beneath a bridge described
in DT, automatically.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14349/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:02:01 +02:00
Paul Burton cfa93fb9c2 MIPS: dma-default: Don't check hw_coherentio if device is non-coherent
There are no cases where plat_device_is_coherent() will return zero
whilst hw_coherentio is non-zero, and acting any differently in such a
case doesn't make much sense - if a device is non-coherent with the CPU
caches then access to memory "coherent" with DMA must be uncached. Clean
up the nonsensical case.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14348/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:01:45 +02:00
Paul Burton f23020230e MIPS: Sanitise coherentio semantics
The coherentio variable has previously been used as a boolean value,
indicating whether the user specified that coherent I/O should be
enabled or disabled. It failed to take into account the case where the
user does not specify any preference, in which case it makes sense that
we should default to coherent I/O if the hardware supports it
(hw_coherentio is non-zero).

Introduce an enum to clarify the 3 different values of coherentio & use
it throughout the code, modifying plat_device_is_coherent() &
r4k_cache_init() to take into account the default case.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/14347/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:01:28 +02:00
Paul Burton 87dd9a4de4 MIPS: PCI: Support generic drivers
Introduce support for PCI drivers using only functionality provided
generically by the PCI subsystem, by adding the minimum arch-provided
functions required.

The driver this has been developed for & tested with the xilinx-pcie on
a MIPS Boston development board.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14346/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:00:52 +02:00
Paul Burton c5611df968 MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY
Introduce 2 Kconfig symbols, CONFIG_PCI_DRIVERS_GENERIC &
CONFIG_PCI_DRIVERS_LEGACY, which indicate whether the system should be
built to for PCI drivers using the MIPS-specific struct pci_controller
API (hereafter "legacy" drivers) or more generic drivers using only
functionality provided by the PCI core (hereafter "generic" drivers).

The Kconfig entries are created such that platforms have to select
CONFIG_PCI_DRIVERS_GENERIC if they wish to use it - that is, the default
is CONFIG_PCI_DRIVERS_LEGACY so that existing platforms need no
modification.

The functions declared in pci.h are rearranged with those provided only
by pci-legacy.c being guarded by an #ifdef CONFIG_PCI_DRIVERS_LEGACY to
ensure they are only used in configurations where they are implemented.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 18:00:05 +02:00
Paul Burton f8091a8897 MIPS: PCI: Split pci.c into pci.c & pci-legacy.c
Split out the parts of pci.c that are used by existing systems with
MIPS-style PCI drivers but that will not be used by systems with more
generic PCI drivers such as pcie-xilinx. This is done in preparation for
allowing configurations where the code moved to pci-legacy.c is not
built.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Burton <paul.burton@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/14344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:59:57 +02:00
Paul Burton ab96b03144 MIPS: PCI: Inline pcibios_assign_all_busses
The MIPS implementation of pcibios_assign_all_busses trivially returns
1. Implement it as a static function in asm/pci.h such that the compiler
can inline it & optimise out never-taken paths.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14343/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:57:52 +02:00
Paul Burton f474ba9d9f MIPS: PCI: Make pcibios_set_cache_line_size an initcall
In preparation for allowing configurations in which pcibios_init is not
included, make pcibios_set_cache_line_size an initcall. arch_initcall is
used such that it runs before the pcibios_init subsys_initcall for
platforms that continue to use it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14342/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:57:41 +02:00
Paul Burton 88555b4819 MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC
Introduce support for CONFIG_PCI_DOMAINS_GENERIC, allowing for platforms
to make use of generic PCI domains instead of the MIPS-specific
implementation. The set_pci_need_domain_info function is introduced to
abstract away the removed need_domain_info field in struct
pci_controller, and pcibios_scanbus is adjusted to use the pci_domain_nr
accessor instead of directly accessing the index field.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14341/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:57:23 +02:00
Paul Burton 23dac14d05 MIPS: PCI: Use struct list_head lists
Rather than open-coding a linked list implementation, make use of the
one in linux/list.h.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14340/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:56:13 +02:00
Marcin Nowakowski d05c513069 MIPS: tracing: disable uprobe/kprobe on compact branch instructions
Current instruction decoder for uprobe/kprobe handler only handles
branches with delay slots. For compact branches the behaviour is rather
unpredictable - and depending on the encoding of a compact branch
instruction may result in one (or more) of:
- executing an instruction that follows a branch which wasn't in a delay
  slot and shouldn't have been executed
- incorrectly emulating a branch leading to a jump to a wrong location
- unexpected branching out of the single-stepped code and never reaching
  the breakpoint that should terminate the probe handler

Results of these actions are generally unpredictable, but can end up
with a probed application or kernel crash, so disable placing probes on
compact branches until they are handled properly.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14336/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:37:40 +02:00
Marcin Nowakowski e3031b3284 MIPS: tracing: move insn_has_delay_slot to a shared header
Currently both kprobes and uprobes code have definitions of the
insn_has_delay_slot method. Move it to a separate header as an inline
method that each probe-specific method can later use.
No functional change intended, although the methods slightly varied in
the constraints they set for the methods - the uprobes one was chosen as
it is slightly more specific when filtering opcode fields.

Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14335/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:36:39 +02:00
Jaedon Shin d66698e083 MIPS: BMIPS: Support APPENDED_DTB
Use appended DTB when available.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:02 +02:00
Jaedon Shin a2c510a2d0 MIPS: BMIPS: Use interrupt-controller node name
Changes node names of the interrupt-controller device nodes to
interrupt-controller instead of label strings.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14004/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:02 +02:00
Jaedon Shin cfc8be04c3 MIPS: BMIPS: Add support NAND device nodes
Adds NAND device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14003/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:02 +02:00
Jaedon Shin b2420e2762 MIPS: BMIPS: Add support SDHCI device nodes
Adds SDHCI device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14002/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:02 +02:00
Jaedon Shin c707844d4b MIPS: BMIPS: Add support GPIO device nodes
Adds GPIO device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14001/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:02 +02:00
Jaedon Shin 7bbe59ddbb MIPS: BMIPS: Add support PWM device nodes
Adds PWM device nodes to BCM7xxx MIPS based SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: MIPS Mailing List <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14000/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton c834469b88 MIPS: Malta: Remove custom halt implementation
The arch code will hang the machine with an infinite loop if the board
doesn't provide an impelementation of halt - let it, rather than
duplicating it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14280/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton 10b6ea0959 MIPS: Malta: Use syscon-reboot driver to reboot
Make use of the generic syscon-reboot driver to reboot the Malta board,
reducing the amount of platform code it requires.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Stephan Linz <linz@li-pro.net>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton 97af8e1cb3 MIPS: Malta: Probe pflash via DT
Add the DT nodes required to probe the CFI compatible parallel monitor
flash found on the Malta development board, and remove the platform
code that was previously doing it. Delete the now-empty malta-platform.c
file. Adjust the Malta defconfigs that enable MTD & the pflash/CFI
driver to enable CONFIG_MTD_PHYSMAP_OF rather than CONFIG_MTD_PHYSMAP in
order to preserve their behaviour.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14278/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton 0a46ffa360 MIPS: Malta: Probe RTC via DT
Add the DT node required to probe the RTC, and remove the platform code
that was previously doing it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14277/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton eea1645bb8 MIPS: Malta: Remove custom DT match table
Since commit 44a7185c2a ("of/platform: Add common method to populate
default bus") the Malta publish_devices initcall has essentially been a
no-op. Remove it.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14276/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:01 +02:00
Paul Burton 38ec82fe21 MIPS: Malta: Probe interrupt controllers via DT
Probe the CPU, GIC & i8259 interrupt controllers present in the Malta
system using device tree. This enables interrupts to be provided to
devices using device tree as they are moved over to being probed using
it.

Since Malta is very configurable it's unknown whether a GIC will be
present at compile time. In order to support both cases the
malta_dt_shim code is added in order to detect whether a GIC is present,
adjusting the DT to route interrupts correctly and nop out the GIC node
if no GIC is found.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14274/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Paul Burton 0051fc2e7b MIPS: Malta: Use all available DDR by default
Malta boards can have more than 256MB DDR available, but we have
previously only made use of up to 256MB (ie. the DDR accessible via
kseg0) by default, without the user manually specifying mem= kernel
parameters. This patch causes all available DDR, as reported by the
bootloader via the ememsize or memsize environment variables or
optionally on the command line, to be used when possible without the
user needing to manually provide the memory ranges.

Malta now has 2 subtly different memory maps which have to be taken into
account when setting this up. The original memory map (referred to by
the code as v1) has up to 2GB of DDR aliased in both the upper & lower
halves of the 32 bit physical address space, with a 256MB I/O region
obscuring 0x10000000-0x1fffffff only in the lower alias. The revised v2
memory map is flat with up to 4GB DDR starting from 0x0, and the I/O
region obscures 256MB of DDR which becomes inacessible. The memory map
in use is indicated by a register provided by the rocit2 system
controller, which is checked in order to set up the kernels memory
ranges accordingly.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14273/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Paul Burton 422dd25664 MIPS: Malta: Allow PCI devices DMA to lower 2GB physical
Set the PCI_BAR0 register in all configurations such that PCI devices
can perform DMA to all of the bottom 2GB of the physical address space.
This is imperfect if we make use of the legacy Malta memory map, but it
is an improvement on the inconsistent values setup before.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14272/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Paul Burton 5d2949ec86 irqchip: i8259: Remove unused i8259A_irq_pending
The i8259A_irq_pending function is unused. Remove the dead code.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Paul Burton 19afc3d269 irqchip: i8259: Allow platforms to override poll function
The default i8259 polling function (i8259_irq) is nicely generic but is
fairly costly. Platforms often provide an alternative means of polling
for an i8259 interrupt, and when using the i8259 without device tree
have typically just chained its parent interrupt to their own handler
function. In order to allow for platform-specific polling functions to
be used in cases where the driver is probed via device tree, provide an
i8259_set_poll function that accepts a pointer to an alternative poll
function that will override the default.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14270/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:31:00 +02:00
Paul Burton e6a54ba304 MIPS: SEAD3: Remove custom read_persistent_clock
The SEAD3 board defines a custom implementation of read_persistent_clock
which does exactly the same dummy operation as the generic weak version.
Remove the not really implemented custom version.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14064/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06 17:10:59 +02:00