smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.
Similar change for ->getxattr() had been done in commit ce23e64. Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull parallel filesystem directory handling update from Al Viro.
This is the main parallel directory work by Al that makes the vfs layer
able to do lookup and readdir in parallel within a single directory.
That's a big change, since this used to be all protected by the
directory inode mutex.
The inode mutex is replaced by an rwsem, and serialization of lookups of
a single name is done by a "in-progress" dentry marker.
The series begins with xattr cleanups, and then ends with switching
filesystems over to actually doing the readdir in parallel (switching to
the "iterate_shared()" that only takes the read lock).
A more detailed explanation of the process from Al Viro:
"The xattr work starts with some acl fixes, then switches ->getxattr to
passing inode and dentry separately. This is the point where the
things start to get tricky - that got merged into the very beginning
of the -rc3-based #work.lookups, to allow untangling the
security_d_instantiate() mess. The xattr work itself proceeds to
switch a lot of filesystems to generic_...xattr(); no complications
there.
After that initial xattr work, the series then does the following:
- untangle security_d_instantiate()
- convert a bunch of open-coded lookup_one_len_unlocked() to calls of
that thing; one such place (in overlayfs) actually yields a trivial
conflict with overlayfs fixes later in the cycle - overlayfs ended
up switching to a variant of lookup_one_len_unlocked() sans the
permission checks. I would've dropped that commit (it gets
overridden on merge from #ovl-fixes in #for-next; proper resolution
is to use the variant in mainline fs/overlayfs/super.c), but I
didn't want to rebase the damn thing - it was fairly late in the
cycle...
- some filesystems had managed to depend on lookup/lookup exclusion
for *fs-internal* data structures in a way that would break if we
relaxed the VFS exclusion. Fixing hadn't been hard, fortunately.
- core of that series - parallel lookup machinery, replacing
->i_mutex with rwsem, making lookup_slow() take it only shared. At
that point lookups happen in parallel; lookups on the same name
wait for the in-progress one to be done with that dentry.
Surprisingly little code, at that - almost all of it is in
fs/dcache.c, with fs/namei.c changes limited to lookup_slow() -
making it use the new primitive and actually switching to locking
shared.
- parallel readdir stuff - first of all, we provide the exclusion on
per-struct file basis, same as we do for read() vs lseek() for
regular files. That takes care of most of the needed exclusion in
readdir/readdir; however, these guys are trickier than lookups, so
I went for switching them one-by-one. To do that, a new method
'->iterate_shared()' is added and filesystems are switched to it
as they are either confirmed to be OK with shared lock on directory
or fixed to be OK with that. I hope to kill the original method
come next cycle (almost all in-tree filesystems are switched
already), but it's still not quite finished.
- several filesystems get switched to parallel readdir. The
interesting part here is dealing with dcache preseeding by readdir;
that needs minor adjustment to be safe with directory locked only
shared.
Most of the filesystems doing that got switched to in those
commits. Important exception: NFS. Turns out that NFS folks, with
their, er, insistence on VFS getting the fuck out of the way of the
Smart Filesystem Code That Knows How And What To Lock(tm) have
grown the locking of their own. They had their own homegrown
rwsem, with lookup/readdir/atomic_open being *writers* (sillyunlink
is the reader there). Of course, with VFS getting the fuck out of
the way, as requested, the actual smarts of the smart filesystem
code etc. had become exposed...
- do_last/lookup_open/atomic_open cleanups. As the result, open()
without O_CREAT locks the directory only shared. Including the
->atomic_open() case. Backmerge from #for-linus in the middle of
that - atomic_open() fix got brought in.
- then comes NFS switch to saner (VFS-based ;-) locking, killing the
homegrown "lookup and readdir are writers" kinda-sorta rwsem. All
exclusion for sillyunlink/lookup is done by the parallel lookups
mechanism. Exclusion between sillyunlink and rmdir is a real rwsem
now - rmdir being the writer.
Result: NFS lookups/readdirs/O_CREAT-less opens happen in parallel
now.
- the rest of the series consists of switching a lot of filesystems
to parallel readdir; in a lot of cases ->llseek() gets simplified
as well. One backmerge in there (again, #for-linus - rockridge
fix)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (74 commits)
ext4: switch to ->iterate_shared()
hfs: switch to ->iterate_shared()
hfsplus: switch to ->iterate_shared()
hostfs: switch to ->iterate_shared()
hpfs: switch to ->iterate_shared()
hpfs: handle allocation failures in hpfs_add_pos()
gfs2: switch to ->iterate_shared()
f2fs: switch to ->iterate_shared()
afs: switch to ->iterate_shared()
befs: switch to ->iterate_shared()
befs: constify stuff a bit
isofs: switch to ->iterate_shared()
get_acorn_filename(): deobfuscate a bit
btrfs: switch to ->iterate_shared()
logfs: no need to lock directory in lseek
switch ecryptfs to ->iterate_shared
9p: switch to ->iterate_shared()
fat: switch to ->iterate_shared()
romfs, squashfs: switch to ->iterate_shared()
more trivial ->iterate_shared conversions
...
Pull crypto update from Herbert Xu:
"API:
- Crypto self tests can now be disabled at boot/run time.
- Add async support to algif_aead.
Algorithms:
- A large number of fixes to MPI from Nicolai Stange.
- Performance improvement for HMAC DRBG.
Drivers:
- Use generic crypto engine in omap-des.
- Merge ppc4xx-rng and crypto4xx drivers.
- Fix lockups in sun4i-ss driver by disabling IRQs.
- Add DMA engine support to ccp.
- Reenable talitos hash algorithms.
- Add support for Hisilicon SoC RNG.
- Add basic crypto driver for the MXC SCC.
Others:
- Do not allocate crypto hash tfm in NORECLAIM context in ecryptfs"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits)
crypto: qat - change the adf_ctl_stop_devices to void
crypto: caam - fix caam_jr_alloc() ret code
crypto: vmx - comply with ABIs that specify vrsave as reserved.
crypto: testmgr - Add a flag allowing the self-tests to be disabled at runtime.
crypto: ccp - constify ccp_actions structure
crypto: marvell/cesa - Use dma_pool_zalloc
crypto: qat - make adf_vf_isr.c dependant on IOV config
crypto: qat - Fix typo in comments
lib: asn1_decoder - add MODULE_LICENSE("GPL")
crypto: omap-sham - Use dma_request_chan() for requesting DMA channel
crypto: omap-des - Use dma_request_chan() for requesting DMA channel
crypto: omap-aes - Use dma_request_chan() for requesting DMA channel
crypto: omap-des - Integrate with the crypto engine framework
crypto: s5p-sss - fix incorrect usage of scatterlists api
crypto: s5p-sss - Fix missed interrupts when working with 8 kB blocks
crypto: s5p-sss - Use common BIT macro
crypto: mxc-scc - fix unwinding in mxc_scc_crypto_register()
crypto: mxc-scc - signedness bugs in mxc_scc_ablkcipher_req_init()
crypto: talitos - fix ahash algorithms registration
crypto: ccp - Ensure all dependencies are specified
...
You cannot allocate crypto tfm objects in NORECLAIM or NOFS contexts.
The ecryptfs code currently does exactly that for the MD5 tfm.
This patch fixes it by preallocating the MD5 tfm in a safe context.
The MD5 tfm is also reentrant so this patch removes the superfluous
cs_hash_tfm_mutex.
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs updates from Al Viro:
- Preparations of parallel lookups (the remaining main obstacle is the
need to move security_d_instantiate(); once that becomes safe, the
rest will be a matter of rather short series local to fs/*.c
- preadv2/pwritev2 series from Christoph
- assorted fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (32 commits)
splice: handle zero nr_pages in splice_to_pipe()
vfs: show_vfsstat: do not ignore errors from show_devname method
dcache.c: new helper: __d_add()
don't bother with __d_instantiate(dentry, NULL)
untangle fsnotify_d_instantiate() a bit
uninline d_add()
replace d_add_unique() with saner primitive
quota: use lookup_one_len_unlocked()
cifs_get_root(): use lookup_one_len_unlocked()
nfs_lookup: don't bother with d_instantiate(dentry, NULL)
kill dentry_unhash()
ceph_fill_trace(): don't bother with d_instantiate(dn, NULL)
autofs4: don't bother with d_instantiate(dentry, NULL) in ->lookup()
configfs: move d_rehash() into configfs_create() for regular files
ceph: don't bother with d_rehash() in splice_dentry()
namei: teach lookup_slow() to skip revalidate
namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()
lookup_one_len_unlocked(): use lookup_dcache()
namei: simplify invalidation logics in lookup_dcache()
namei: change calling conventions for lookup_{fast,slow} and follow_managed()
...
This patch replaces uses of ablkcipher and blkcipher with skcipher,
and the long obsolete hash interface with shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The key_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around this call might not be needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- The filename decryption routines were, at times, writing a zero byte one
character past the end of the filename buffer
- The encrypted view feature attempted, and failed, to roll its own form of
enforcing a read-only mount instead of letting the VFS enforce it
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jTyq
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs fixes from Tyler Hicks:
"Fixes for filename decryption and encrypted view plus a cleanup
- The filename decryption routines were, at times, writing a zero
byte one character past the end of the filename buffer
- The encrypted view feature attempted, and failed, to roll its own
form of enforcing a read-only mount instead of letting the VFS
enforce it"
* tag 'ecryptfs-3.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: Remove buggy and unnecessary write in file name decode routine
eCryptfs: Remove unnecessary casts when parsing packet lengths
eCryptfs: Force RO mount when encrypted view is enabled
Dmitry Chernenkov used KASAN to discover that eCryptfs writes past the
end of the allocated buffer during encrypted filename decoding. This
fix corrects the issue by getting rid of the unnecessary 0 write when
the current bit offset is 2.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Reported-by: Dmitry Chernenkov <dmitryc@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org # v2.6.29+: 51ca58d eCryptfs: Filename Encryption: Encoding and encryption functions
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.
[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.
https://launchpad.net/bugs/1243636
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Lars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
It might be possible for two callers to race the mutex lock after the
NULL ctx check. Instead, move the lock above the check so there isn't
the possibility of leaking a crypto ctx. Additionally, report the full
algo name when failing.
Signed-off-by: Kees Cook <keescook@chromium.org>
[tyhicks: remove out label, which is no longer used]
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
It doesn't make sense to check if an array is NULL. The compiler just
removes the check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
- Remove redundant code by merging some encrypt and decrypt functions
- Get rid of a helper page allocation during page decryption by using in-place
decryption
- Better use of entire pages during page crypto operations
- Several code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=mRpN
-----END PGP SIGNATURE-----
Merge tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs
Pull eCryptfs updates from Tyler Hicks:
"Code cleanups and improved buffer handling during page crypto
operations:
- Remove redundant code by merging some encrypt and decrypt functions
- Get rid of a helper page allocation during page decryption by using
in-place decryption
- Better use of entire pages during page crypto operations
- Several code cleanups"
* tag 'ecryptfs-3.11-rc1-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
Use ecryptfs_dentry_to_lower_path in a couple of places
eCryptfs: Make extent and scatterlist crypt function parameters similar
eCryptfs: Collapse crypt_page_offset() into crypt_extent()
eCryptfs: Merge ecryptfs_encrypt_extent() and ecryptfs_decrypt_extent()
eCryptfs: Combine page_offset crypto functions
eCryptfs: Combine encrypt_scatterlist() and decrypt_scatterlist()
eCryptfs: Decrypt pages in-place
eCryptfs: Accept one offset parameter in page offset crypto functions
eCryptfs: Simplify lower file offset calculation
eCryptfs: Read/write entire page during page IO
eCryptfs: Use entire helper page during page crypto operations
eCryptfs: Cocci spatch "memdup.spatch"
The 'dest' abbreviation is only used in crypt_scatterlist(), while all
other functions in crypto.c use 'dst' so dest_sg should be renamed to
dst_sg.
The crypt_stat parameter is typically the first parameter in internal
eCryptfs functions so crypt_stat and dst_page should be swapped in
crypt_extent().
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
crypt_page_offset() simply initialized the two scatterlists and called
crypt_scatterlist() so it is simple enough to move into the only
function that calls it.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
They are identical except if the src_page or dst_page index is used, so
they can be merged safely if page_index is conditionally assigned.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Combine ecryptfs_encrypt_page_offset() and
ecryptfs_decrypt_page_offset(). These two functions are functionally
identical so they can be safely merged if the caller can indicate
whether an encryption or decryption operation should occur.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
These two functions are identical except for a debug printk and whether
they call crypto_ablkcipher_encrypt() or crypto_ablkcipher_decrypt(), so
they can be safely merged if the caller can indicate if encryption or
decryption should occur.
The debug printk is useless so it is removed.
Two new #define's are created to indicate if an ENCRYPT or DECRYPT
operation is desired.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When reading in a page, eCryptfs would allocate a helper page, fill it
with encrypted data from the lower filesytem, and then decrypt the data
from the encrypted page and store the result in the eCryptfs page cache
page.
The crypto API supports in-place crypto operations which means that the
allocation of the helper page is unnecessary when decrypting. This patch
gets rid of the unneeded page allocation by reading encrypted data from
the lower filesystem directly into the page cache page. The page cache
page is then decrypted in-place.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
There is no longer a need to accept different offset values for the
source and destination pages when encrypting/decrypting an extent in an
eCryptfs page. The two offsets can be collapsed into a single parameter.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Now that lower filesystem IO operations occur for complete
PAGE_CACHE_SIZE bytes, the calculation for converting an eCryptfs extent
index into a lower file offset can be simplified.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When reading and writing encrypted pages, perform IO using the entire
page all at once rather than 4096 bytes at a time.
This only affects architectures where PAGE_CACHE_SIZE is larger than
4096 bytes.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
When encrypting eCryptfs pages and decrypting pages from the lower
filesystem, utilize the entire helper page rather than only the first
4096 bytes.
This only affects architectures where PAGE_CACHE_SIZE is larger than
4096 bytes.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Make the switch from the blkcipher kernel crypto interface to the
ablkcipher interface.
encrypt_scatterlist() and decrypt_scatterlist() now use the ablkcipher
interface but, from the eCryptfs standpoint, still treat the crypto
operation as a synchronous operation. They submit the async request and
then wait until the operation is finished before they return. Most of
the changes are contained inside those two functions.
Despite waiting for the completion of the crypto operation, the
ablkcipher interface provides performance increases in most cases when
used on AES-NI capable hardware.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Acked-by: Colin King <colin.king@canonical.com>
Reviewed-by: Zeev Zilberman <zeev@annapurnaLabs.com>
Cc: Dustin Kirkland <dustin.kirkland@gazzang.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Ying Huang <ying.huang@intel.com>
Cc: Thieu Le <thieule@google.com>
Cc: Li Wang <dragonylffly@163.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@iki.fi>
This is always called with a valid "sg" pointer. My static checker
complains because the call to sg_init_table() dereferences "sg" before
we reach the checks.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
the function ecryptfs_encode_for_filename() is only used in this file
Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
statfs() calls on eCryptfs files returned the wrong filesystem type and,
when using filename encryption, the wrong maximum filename length.
If mount-wide filename encryption is enabled, the cipher block size and
the lower filesystem's max filename length will determine the max
eCryptfs filename length. Pre-tested, known good lengths are used when
the lower filesystem's namelen is 255 and a cipher with 8 or 16 byte
block sizes is used. In other, less common cases, we fall back to a safe
rounded-down estimate when determining the eCryptfs namelen.
https://launchpad.net/bugs/885744
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
If pages passed to the eCryptfs extent-based crypto functions are not
mapped and the module parameter ecryptfs_verbosity=1 was specified at
loading time, a NULL pointer dereference will occur.
Note that this wouldn't happen on a production system, as you wouldn't
pass ecryptfs_verbosity=1 on a production system. It leaks private
information to the system logs and is for debugging only.
The debugging info printed in these messages is no longer very useful
and rather than doing a kmap() in these debugging paths, it will be
better to simply remove the debugging paths completely.
https://launchpad.net/bugs/913651
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Daniel DeFreez
Cc: <stable@vger.kernel.org>
Removes unneeded variable initialization in ecryptfs_read_metadata(). Also adds
a small comment to help explain metadata reading logic.
[tyhicks@canonical.com: Pulled out of for-stable patch and wrote commit msg]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Print inode on metadata read failure. The only real
way of dealing with metadata read failures is to delete
the underlying file system file. Having the inode
allows one to 'find . -inum INODE`.
[tyhicks@canonical.com: Removed some minor not-for-stable parts]
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
From mhalcrow's original commit message:
Characters with ASCII values greater than the size of
filename_rev_map[] are valid filename characters.
ecryptfs_decode_from_filename() will access kernel memory beyond
that array, and ecryptfs_parse_tag_70_packet() will then decrypt
those characters. The attacker, using the FNEK of the crafted file,
can then re-encrypt the characters to reveal the kernel memory past
the end of the filename_rev_map[] array. I expect low security
impact since this array is statically allocated in the text area,
and the amount of memory past the array that is accessible is
limited by the largest possible ASCII filename character.
This patch solves the issue reported by mhalcrow but with an
implementation suggested by Linus to simply extend the length of
filename_rev_map[] to 256. Characters greater than 0x7A are mapped to
0x00, which is how invalid characters less than 0x7A were previously
being handled.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Michael Halcrow <mhalcrow@google.com>
Cc: stable@kernel.org
The file creation path prematurely called d_instantiate() and
unlock_new_inode() before the eCryptfs inode info was fully
allocated and initialized and before the eCryptfs metadata was written
to the lower file.
This could result in race conditions in subsequent file and inode
operations leading to unexpected error conditions or a null pointer
dereference while attempting to use the unallocated memory.
https://launchpad.net/bugs/813146
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: stable@kernel.org
Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.
- Shorten overly descriptive variable names such as ecryptfs_dentry
- Simplify gotos and error paths
- Create helper function for reading plaintext i_size from metadata
It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.
Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.
https://bugzilla.kernel.org/show_bug.cgi?id=36002
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Reported-by: David <david@unsolicited.net>
Tested-by: David <david@unsolicited.net>
When failing to read the lower file's crypto metadata during a lookup,
eCryptfs must continue on without throwing an error. For example, there
may be a plaintext file in the lower mount point that the user wants to
delete through the eCryptfs mount.
If an error is encountered while reading the metadata in lookup(), the
eCryptfs inode's size could be incorrect. We must be sure to reread the
plaintext inode size from the metadata when performing an open() or
setattr(). The metadata is already being read in those paths, so this
adds minimal performance overhead.
This patch introduces a flag which will track whether or not the
plaintext inode size has been read so that an incorrect i_size can be
fixed in the open() or setattr() paths.
https://bugs.launchpad.net/bugs/509180
Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch removes the 'num_global_auth_toks' field of the
ecryptfs_mount_crypt_stat structure, used to count the number of items in
the 'global_auth_tok_list' list. This variable is not needed because there
are no checks based upon it.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When creating a new eCryptfs file, the crypto metadata is written out
and then the lower file was being "grown" with 4 kB of encrypted zeroes.
I suspect that growing the encrypted file was to prevent an information
leak that the unencrypted file was empty. However, the unencrypted file
size is stored, in plaintext, in the metadata so growing the file is
unnecessary.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Commit cb55d21f6fa19d8c6c2680d90317ce88c1f57269 revealed a number of
missing 'z' length modifiers in calls to ecryptfs_printk() when
printing variables of type size_t. This patch fixes those compiler
warnings.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Add __attribute__((format... to __ecryptfs_printk
Make formats and arguments match.
Add casts to (unsigned long long) for %llu.
Signed-off-by: Joe Perches <joe@perches.com>
[tyhicks: 80 columns cleanup and fixed typo]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Fixes a regression caused by 21edad3220
When file name encryption was enabled, ecryptfs_lookup() failed to use
the encrypted and encoded version of the upper, plaintext, file name
when performing a lookup in the lower file system. This made it
impossible to lookup existing encrypted file names and any newly created
files would have plaintext file names in the lower file system.
https://bugs.launchpad.net/ecryptfs/+bug/623087
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Al Viro