Commit Graph

17330 Commits

Author SHA1 Message Date
Ingo Molnar 860fc2f264 Merge branch 'perf/urgent' into perf/core
Pick up the latest fixes, refresh the development tree.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:33:30 +01:00
Peter Zijlstra 7479f3c9cf sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
I noticed the new sched_{set,get}attr() calls didn't properly deal
with the SCHED_RESET_ON_FORK hack.

Instead of propagating the flags in high bits nonsense use the brand
spanking new attr::sched_flags field.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Dario Faggioli <raistlin@linux.it>
Link: http://lkml.kernel.org/r/20140115162242.GJ31570@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:17 +01:00
Peter Zijlstra 0bb040a443 sched: Fix up attr::sched_priority warning
Fengguang Wu reported the following build warning:

  > kernel/sched/core.c:3067 __sched_setscheduler() warn: unsigned 'attr->sched_priority' is never less than zero.

Since it doesn't make sense for attr::sched_priority to be negative,
remove the check, since we already test for an upper limit any actual
negative values passed in through the old param::sched_priority field
will still be detected.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Dario Faggioli <raistlin@linux.it>
Fixes: d50dde5a10 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI")
Link: http://lkml.kernel.org/n/tip-fid9nalzii2r5voxtf4eh5kz@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:16 +01:00
Peter Zijlstra 39fd8fd22b sched: Fix up scheduler syscall LTP fails
Wu reported LTP failures:

  > ltp.sched_setparam02.1.TFAIL
  > ltp.sched_setparam02.2.TFAIL
  > ltp.sched_setparam02.3.TFAIL
  > ltp.sched_setparam03.1.TFAIL

There were 2 things wrong; firstly __setscheduler() failed on
sched_setparam()'s policy = -1, fix that by reading from p->policy in
that case.

Secondly, getparam() (and getattr()) would still report !0
sched_priority for !FIFO/RR tasks after having been such. So
unconditionally set p->rt_priority.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Dario Faggioli <raistlin@linux.it>
Fixes: d50dde5a10 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI")
Link: http://lkml.kernel.org/r/20140115153320.GH31570@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:15 +01:00
Peter Zijlstra e3de300d12 sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
Previously sched_setscheduler() and sched_setparam() would not affect
the nice value of a task, restore this behaviour.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: raistlin@linux.it
Cc: juri.lelli@gmail.com
Cc: Michael wang <wangyun@linux.vnet.ibm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Fixes: d50dde5a10 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI")
Link: http://lkml.kernel.org/r/20140115113015.GB31570@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:14 +01:00
Juri Lelli 5778fccf36 sched/core: Fix htmldocs warnings
Fengguang Wu's kbuild test robot reported the following new htmldocs warnings:

  >>> Warning(kernel/sched/core.c:3380): No description found for parameter 'uattr'
  >>> Warning(kernel/sched/core.c:3380): Excess function parameter 'attr' description in 'sys_sched_setattr'
  >>> Warning(kernel/sched/core.c:3520): No description found for parameter 'uattr'
  >>> Warning(kernel/sched/core.c:3520): Excess function parameter 'attr' description in 'sys_sched_getattr'

The second argument to sys_sched_{setattr,getattr}() is named uattr (not attr).

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Dario Faggioli <raistlin@linux.it>
Fixes: d50dde5a10 ("sched: Add new scheduler syscalls to support an extended scheduling parameters ABI")
Link: http://lkml.kernel.org/r/52D5552D.5000102@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:12 +01:00
Juri Lelli 71362650b5 sched/deadline: No need to check p if dl_se is valid
Dan Carpenter reported new 'Smatch' warnings:

  > tree:   git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
  > head:   130816ce4d
  > commit: 1baca4ce16 [17/50] sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
  >
  > kernel/sched/deadline.c:937 pick_next_task_dl() warn: variable dereferenced before check 'p' (see line 934)

BUG_ON() already fires if pick_next_dl_entity() doesn't return a valid
dl_se. No need to check if p is valid afterward.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Fixes: 1baca4ce16 ("sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic")
Link: http://lkml.kernel.org/r/52D54E25.6060100@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:11 +01:00
Peter Zijlstra d8bf52311e sched/deadline: Remove unused variables
fix these new sparse warnings:

  >> kernel/sched/core.c:305:14: sparse: symbol 'sysctl_sched_dl_period' was not declared. Should it be static?
  >> kernel/sched/core.c:306:5: sparse: symbol 'sysctl_sched_dl_runtime' was not declared. Should it be static?

Better still, they're completely unused so remove them.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Link: http://lkml.kernel.org/n/tip-ke0shkG7vMnzmcdqhhiymyem@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:10 +01:00
Fengguang Wu 88f1ebbc25 sched/deadline: Fix sparse static warnings
new sparse warnings:

  >> kernel/sched/cpudeadline.c:38:6: sparse: symbol 'cpudl_exchange' was not declared. Should it be static?
  >> kernel/sched/cpudeadline.c:46:6: sparse: symbol 'cpudl_heapify' was not declared. Should it be static?
  >> kernel/sched/cpudeadline.c:71:6: sparse: symbol 'cpudl_change_key' was not declared. Should it be static?
  >> kernel/sched/cpudeadline.c:195:15: sparse: memset with byte count of 163928

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Fixes: 6bfd6d72f5 ("sched/deadline: speed up SCHED_DEADLINE pushes with a push-heap")
Link: http://lkml.kernel.org/r/52d47f8c.EYJsA5+mELPBk4t6\%fengguang.wu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-16 09:27:03 +01:00
Linus Torvalds 85ce70fdf4 Merge branches 'sched-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler and timer fixes from Ingo Molnar:
 "Contains a fix for a scheduler bug that manifested itself as a 3D
  performance regression and a crash fix for the ARM Cadence TTC clock
  driver"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Calculate effective load even if local weight is 0

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: cadence_ttc: Fix mutex taken inside interrupt context
2014-01-16 08:33:21 +07:00
Kevin Hilman 8fe8ff09ce sched/nohz: Fix overflow error in scheduler_tick_max_deferment()
While calculating the scheduler tick max deferment, the delta is
converted from microseconds to nanoseconds through a multiplication
against NSEC_PER_USEC.

But this microseconds operand is an unsigned int, thus the result may
likely overflow. The result is cast to u64 but only once the operation
is completed, which is too late to avoid overflown result.

This is currently not a problem because the scheduler tick max deferment
is 1 second. But this may become an issue as we plan to make this
value tunable.

So lets fix this by casting the usecs value to u64 before multiplying by
NSECS_PER_USEC.

Also to prevent from this kind of mistake to happen again, move this
ad-hoc jiffies -> nsecs conversion to a new helper.

Signed-off-by: Kevin Hilman <khilman@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Link: http://lkml.kernel.org/r/1387315388-31676-2-git-send-email-khilman@linaro.org
[move ad-hoc conversion to jiffies_to_nsecs helper]
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-16 00:08:12 +01:00
Alex Shi e9a2eb403b nohz_full: fix code style issue of tick_nohz_full_stop_tick
Code usually starts with 'tab' instead of 7 'space' in kernel

Signed-off-by: Alex Shi <alex.shi@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Link: http://lkml.kernel.org/r/1386074112-30754-2-git-send-email-alex.shi@linaro.org
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15 23:07:11 +01:00
Frederic Weisbecker 855a0fc30b nohz: Get timekeeping max deferment outside jiffies_lock
We don't need to fetch the timekeeping max deferment under the
jiffies_lock seqlock.

If the clocksource is updated concurrently while we stop the tick,
stop machine is called and the tick will be reevaluated again along with
uptodate jiffies and its related values.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Link: http://lkml.kernel.org/r/1387320692-28460-9-git-send-email-fweisbec@gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15 23:07:11 +01:00
Frederic Weisbecker 5acac1be49 tick: Rename tick_check_idle() to tick_irq_enter()
This makes the code more symetric against the existing tick functions
called on irq exit: tick_irq_exit() and tick_nohz_irq_exit().

These function are also symetric as they mirror each other's action:
we start to account idle time on irq exit and we stop this accounting
on irq entry. Also the tick is stopped on irq exit and timekeeping
catches up with the tickless time elapsed until we reach irq entry.

This rename was suggested by Peter Zijlstra a long while ago but it
got forgotten in the mass.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Link: http://lkml.kernel.org/r/1387320692-28460-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15 23:05:31 +01:00
Joe Perches 3e1d0bb622 audit: Convert int limit uses to u32
The equivalent uapi struct uses __u32 so make the kernel
uses u32 too.

This can prevent some oddities where the limit is
logged/emitted as a negative value.

Convert kstrtol to kstrtouint to disallow negative values.

Signed-off-by: Joe Perches <joe@perches.com>
[eparis: do not remove static from audit_default declaration]
2014-01-14 14:54:00 -05:00
Joe Perches d957f7b726 audit: Use more current logging style
Add pr_fmt to prefix "audit: " to output
Convert printk(KERN_<LEVEL> to pr_<level>
Coalesce formats
Use pr_cont
Move a brace after switch

Signed-off-by: Joe Perches <joe@perches.com>
2014-01-14 14:53:54 -05:00
Joe Perches b8dbc3241f audit: Use hex_byte_pack_upper
Using the generic kernel function causes the
object size to increase with gcc 4.8.1.

$ size kernel/audit.o*
   text	   data	    bss	    dec	    hex	filename
  18577	   6079	   8436	  33092	   8144	kernel/audit.o.new
  18579	   6015	   8420	  33014	   80f6	kernel/audit.o.old

Unsigned...
2014-01-14 14:53:50 -05:00
Steven Rostedt (Red Hat) dced341b2d tracing: Have trace buffer point back to trace_array
The trace buffer has a descriptor pointer that goes back to the trace
array. But it was never assigned. Luckily, nothing uses it (yet), but
it will in the future.

Although nothing currently uses this, if any of the new features get
backported to older kernels, and because this is such a simple change,
I'm marking it for stable too.

Cc: stable@vger.kernel.org # v3.10+
Fixes: 12883efb67 "tracing: Consolidate max_tr into main trace_array structure"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-14 10:19:46 -05:00
Eric Paris 1ce319f11c audit: reorder AUDIT_TTY_SET arguments
An admin is likely to want to see old and new values next to each other.
Putting all of the old values followed by all of the new values is just
hard to read as a human.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:41 -05:00
Eric Paris 0e23baccaa audit: rework AUDIT_TTY_SET to only grab spin_lock once
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one
time.  We need to determine if the new values are valid and if so, set
the new values at the same time we grab the old onces.  While we are
here get rid of 'res' and just use err.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:41 -05:00
Eric Paris 3f0c5fad89 audit: remove needless switch in AUDIT_SET
If userspace specified that it was setting values via the mask we do not
need a second check to see if they also set the version field high
enough to understand those values.  (clearly if they set the mask they
knew those values).

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:39 -05:00
Eric Paris 70249a9cfd audit: use define's for audit version
Give names to the audit versions.  Just something for a userspace
programmer to know what the version provides.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:36 -05:00
Eric Paris c81825dd6b audit: wait_for_auditd rework for readability
We had some craziness with signed to unsigned long casting which appears
wholely unnecessary.  Just use signed long.  Even though 2 values of the
math equation are unsigned longs the result is expected to be a signed
long.  So why keep casting the result to signed long?  Just make it
signed long and use it.

We also remove the needless "timeout" variable.  We already have the
stack "sleep_time" variable.  Just use that...

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:33:27 -05:00
Richard Guy Briggs ad2ac26327 audit: log task info on feature change
Add task information to the log when changing a feature state.

Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:56 -05:00
Gao feng de92fc97e1 audit: fix incorrect set of audit_sock
NETLINK_CB(skb).sk is the socket of user space process,
netlink_unicast in kauditd_send_skb wants the kernel
side socket. Since the sk_state of audit netlink socket
is not NETLINK_CONNECTED, so the netlink_getsockbyportid
doesn't return -ECONNREFUSED.

And the socket of userspace process can be released anytime,
so the audit_sock may point to invalid socket.

this patch sets the audit_sock to the kernel side audit
netlink socket.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:49 -05:00
Gao feng 11ee39ebf7 audit: print error message when fail to create audit socket
print the error message and then return -ENOMEM.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:44 -05:00
Richard Guy Briggs 5ee9a75c9f audit: fix dangling keywords in audit_log_set_loginuid() output
Remove spaces between "new", "old" label modifiers and "auid", "ses" labels in
log output since userspace tools can't parse orphaned keywords.

Make variable names more consistent and intuitive.

Make audit_log_format() argument code easier to read.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:38 -05:00
Richard Guy Briggs 724e4fcc8d audit: log on errors from filter user rules
An error on an AUDIT_NEVER rule disabled logging on that rule.
On error on AUDIT_NEVER rules, log.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:31 -05:00
Toshiyuki Okajima 6dd80aba90 audit: audit_log_start running on auditd should not stop
The backlog cannot be consumed when audit_log_start is running on auditd
even if audit_log_start calls wait_for_auditd to consume it.
The situation is the deadlock because only auditd can consume the backlog.
If the other process needs to send the backlog, it can be also stopped
by the deadlock.

So, audit_log_start running on auditd should not stop.

You can see the deadlock with the following reproducer:
 # auditctl -a exit,always -S all
 # reboot

Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Reviewed-by: gaofeng@cn.fujitsu.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:22 -05:00
Richard Guy Briggs 1b7b533f65 audit: drop audit_cmd_lock in AUDIT_USER family of cases
We do not need to hold the audit_cmd_mutex for this family of cases.  The
possible exception to this is the call to audit_filter_user(), so drop the lock
immediately after.  To help in fixing the race we are trying to avoid, make
sure that nothing called by audit_filter_user() calls audit_log_start().  In
particular, watch out for *_audit_rule_match().

This fix will take care of systemd and anything USING audit.  It still means
that we could race with something configuring audit and auditd shutting down.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reported-by: toshi.okajima@jp.fujitsu.com
Tested-by: toshi.okajima@jp.fujitsu.com
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:32:11 -05:00
Eric Paris 4440e85481 audit: convert all sessionid declaration to unsigned int
Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int.  Just use unsigned int throughout.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:46 -05:00
Paul Davies C ff235f51a1 audit: Added exe field to audit core dump signal log
Currently when the coredump signals are logged by the audit system, the
actual path to the executable is not logged. Without details of exe, the
system admin may not have an exact idea on what program failed.

This patch changes the audit_log_task() so that the path to the exe is also
logged.

This was copied from audit_log_task_info() and the latter enhanced to avoid
disappearing text fields.

Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:38 -05:00
Richard Guy Briggs 34eab0a7cd audit: prevent an older auditd shutdown from orphaning a newer auditd startup
There have been reports of auditd restarts resulting in kaudit not being able
to find a newly registered auditd.  It results in reports such as:
	kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614
	kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320
	kernel: [ 2077.234718] audit: auditd disappeared
		(previously mis-spelled "dissapeared")

One possible cause is a race between the shutdown of an older auditd and a
newer one.  If the newer one sets the daemon pid to itself in kauditd before
the older one has cleared the daemon pid, the newer daemon pid will be erased.
This could be caused by an automated system, or by manual intervention, but in
either case, there is no use in having the older daemon clear the daemon pid
reference since its old pid is no longer being referenced.  This patch will
prevent that specific case, returning an error of EACCES.

The case for preventing a newer auditd from registering itself if there is an
existing auditd is a more difficult case that is beyond the scope of this
patch.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:27 -05:00
Richard Guy Briggs ce0d9f0469 audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* cases
audit_receive_msg() needlessly contained a fallthrough case that called
audit_receive_filter(), containing no common code between the cases.  Separate
them to make the logic clearer.  Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE,
AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send()
functions.  This should not functionally change the logic.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:22 -05:00
Richard Guy Briggs a06e56b2a1 audit: log AUDIT_TTY_SET config changes
Log transition of config changes when AUDIT_TTY_SET is called, including both
enabled and log_passwd values now in the struct.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:15 -05:00
Richard Guy Briggs 04ee1a3b8f audit: get rid of *NO* daemon at audit_pid=0 message
kauditd_send_skb is called after audit_pid was checked to be non-zero.

However, it can be set to 0 due to auditd exiting while kauditd_send_skb
is still executed and this can result in a spurious warning about missing
auditd.

Re-check audit_pid before printing the message.

Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:31:07 -05:00
Paul Davies C 61c0ee8792 audit: drop audit_log_abend()
The audit_log_abend() is used only by the audit_core_dumps(). Thus there is no
need of maintaining the audit_log_abend() as a separate function.

This patch drops the audit_log_abend() and pushes its functionalities back to
the audit_core_dumps(). Apart from that the "reason" field is also dropped
from being logged since the reason can be deduced from the signal number.

Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:59 -05:00
Richard Guy Briggs 40c0775e5e audit: allow unlimited backlog queue
Since audit can already be disabled by "audit=0" on the kernel boot line, or by
the command "auditctl -e 0", it would be more useful to have the
audit_backlog_limit set to zero mean effectively unlimited (limited only by
system RAM).

Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:38 -05:00
Gao feng c2412d91c6 audit: don't generate loginuid log when audit disabled
If audit is disabled, we shouldn't generate loginuid audit
log.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:25 -05:00
Gao feng 4547b3bc43 audit: use old_lock in audit_set_feature
we already have old_lock, no need to calculate it again.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:30:19 -05:00
Gao feng b6c50fe0be audit: don't generate audit feature changed log when audit disabled
If audit is disabled,we shouldn't generate the audit log.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:29:06 -05:00
Gao feng aabce351b5 audit: fix incorrect order of log new and old feature
The order of new feature and old feature is incorrect,
this patch fix it.

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:29:00 -05:00
Gao feng d3ca0344b2 audit: remove useless code in audit_enable
Since kernel parameter is operated before
initcall, so the audit_initialized must be
AUDIT_UNINITIALIZED or DISABLED in audit_enable.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:53 -05:00
Richard Guy Briggs 51cc83f024 audit: add audit_backlog_wait_time configuration option
reaahead-collector abuses the audit logging facility to discover which files
are accessed at boot time to make a pre-load list

Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up,
or gets blocked, the callers won't be blocked.

Bump audit_status API version to "2".

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:45 -05:00
Richard Guy Briggs 09f883a902 audit: clean up AUDIT_GET/SET local variables and future-proof API
Re-named confusing local variable names (status_set and status_get didn't agree
with their command type name) and reduced their scope.

Future-proof API changes by not depending on the exact size of the audit_status
struct and by adding an API version field.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:39 -05:00
Richard Guy Briggs f910fde730 audit: add kernel set-up parameter to override default backlog limit
The default audit_backlog_limit is 64.  This was a reasonable limit at one time.

systemd causes so much audit queue activity on startup that auditd doesn't
start before the backlog queue has already overflowed by more than a factor of
2.  On a system with audit= not set on the kernel command line, this isn't an
issue since that history isn't kept for auditd when it is available.  On a
system with audit=1 set on the kernel command line, kaudit tries to keep that
history until auditd is able to drain the queue.

This default can be changed by the "-b" option in audit.rules once the system
has booted, but won't help with lost messages on boot.

One way to solve this would be to increase the default backlog queue size to
avoid losing any messages before auditd is able to consume them.  This would
be overkill to the embedded community and insufficient for some servers.

Another way to solve it might be to add a kconfig option to set the default
based on the system type.  An embedded system would get the current (or
smaller) default, while Workstations might get more than now and servers might
get more.

None of these solutions helps if a system's compiled default is too small to
see the lost messages without compiling a new kernel.

This patch adds a kernel set-up parameter (audit already has one to
enable/disable it) "audit_backlog_limit=<n>" that overrides the default to
allow the system administrator to set the backlog limit.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:31 -05:00
Dan Duval 7ecf69bf50 audit: efficiency fix 2: request exclusive wait since all need same resource
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Use add_wait_queue_exclusive() in wait_for_auditd() to put the
thread on the wait queue.  When kauditd dequeues an skb, all
of the waiting threads are waiting for the same resource, but
only one is going to get it, so there's no need to wake up
more than one waiter.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:19 -05:00
Dan Duval db89731940 audit: efficiency fix 1: only wake up if queue shorter than backlog limit
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Only issue a wake_up in kauditd if the length of the skb queue is less than the
backlog limit.  Otherwise, threads waiting in wait_for_auditd() will simply
wake up, discover that the queue is still too long for them to proceed, and go
back to sleep.  This results in wasted context switches and machine cycles.
kauditd_thread() is the only function that removes buffers from audit_skb_queue
so we can't race.  If we did, the timeout in wait_for_auditd() would expire and
the waiting thread would continue.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:08 -05:00
Richard Guy Briggs ae887e0bdc audit: make use of remaining sleep time from wait_for_auditd
If wait_for_auditd() times out, go immediately to the error function rather
than retesting the loop conditions.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:53 -05:00
Richard Guy Briggs e789e561a5 audit: reset audit backlog wait time after error recovery
When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero.  Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.

See also:
	https://lkml.org/lkml/2013/9/2/473

Cc: stable@vger.kernel.org # v3.8-rc4+
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:30 -05:00
Richard Guy Briggs 33faba7fa7 audit: listen in all network namespaces
Convert audit from only listening in init_net to use register_pernet_subsys()
to dynamically manage the netlink socket list.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:24 -05:00
Richard Guy Briggs 2f2ad10133 audit: restore order of tty and ses fields in log output
When being refactored from audit_log_start() to audit_log_task_info(), in
commit e23eb920 the tty and ses fields in the log output got transposed.
Restore to original order to avoid breaking search tools.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:16 -05:00
Richard Guy Briggs f9441639e6 audit: fix netlink portid naming and types
Normally, netlink ports use the PID of the userspace process as the port ID.
If the PID is already in use by a port, the kernel will allocate another port
ID to avoid conflict.  Re-name all references to netlink ports from pid to
portid to reflect this reality and avoid confusion with actual PIDs.  Ports
use the __u32 type, so re-type all portids accordingly.

(This patch is very similar to ebiederman's 5deadd69)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:26:52 -05:00
Eric W. Biederman ca24a23ebc audit: Simplify and correct audit_log_capset
- Always report the current process as capset now always only works on
  the current process.  This prevents reporting 0 or a random pid in
  a random pid namespace.

- Don't bother to pass the pid as is available.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
(cherry picked from commit bcc85f0af31af123e32858069eb2ad8f39f90e67)
(cherry picked from commit f911cac4556a7a23e0b3ea850233d13b32328692)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[eparis: fix build error when audit disabled]
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:26:48 -05:00
Steven Rostedt (Red Hat) a4c35ed241 ftrace: Fix synchronization location disabling and freeing ftrace_ops
The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.

The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.

This affects perf and any externel users of function tracing (LTTng and
SystemTap).

Cc: stable@vger.kernel.org # 3.0+
Fixes: cdbe61bfe7 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-13 12:56:21 -05:00
Peter Zijlstra 8cb75e0c4e sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
With various drivers wanting to inject idle time; we get people
calling idle routines outside of the idle loop proper.

Therefore we need to be extra careful about not missing
TIF_NEED_RESCHED -> PREEMPT_NEED_RESCHED propagations.

While looking at this, I also realized there's a small window in the
existing idle loop where we can miss TIF_NEED_RESCHED; when it hits
right after the tif_need_resched() test at the end of the loop but
right before the need_resched() test at the start of the loop.

So move preempt_fold_need_resched() out of the loop where we're
guaranteed to have TIF_NEED_RESCHED set.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-x9jgh45oeayzajz2mjt0y7d6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 17:38:55 +01:00
Peter Zijlstra 0bd3a173d7 sched/preempt, locking: Rework local_bh_{dis,en}able()
Currently local_bh_disable() is out-of-line for no apparent reason.
So inline it to save a few cycles on call/return nonsense, the
function body is a single add on x86 (a few loads and store extra on
load/store archs).

Also expose two new local_bh functions:

  __local_bh_{dis,en}able_ip(unsigned long ip, unsigned int cnt);

Which implement the actual local_bh_{dis,en}able() behaviour.

The next patch uses the exposed @cnt argument to optimize bh lock
functions.

With build fixes from Jacob Pan.

Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 17:32:27 +01:00
Steven Rostedt (Red Hat) 23a8e8441a ftrace: Have function graph only trace based on global_ops filters
Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.

The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.

For example, one just needs to do the following:

 # cd /sys/kernel/debug/tracing
 # echo schedule > set_ftrace_filter
 # echo function_graph > current_tracer
 # cat trace
[..]
 0)               |  schedule() {
 ------------------------------------------
 0)    <idle>-0    =>   rcu_pre-7
 ------------------------------------------

 0) ! 2980.314 us |  }
 0)               |  schedule() {
 ------------------------------------------
 0)   rcu_pre-7    =>    <idle>-0
 ------------------------------------------

 0) + 20.701 us   |  }

 # echo 1 > /proc/sys/kernel/stack_tracer_enabled
 # cat trace
[..]
 1) + 20.825 us   |      }
 1) + 21.651 us   |    }
 1) + 30.924 us   |  } /* SyS_ioctl */
 1)               |  do_page_fault() {
 1)               |    __do_page_fault() {
 1)   0.274 us    |      down_read_trylock();
 1)   0.098 us    |      find_vma();
 1)               |      handle_mm_fault() {
 1)               |        _raw_spin_lock() {
 1)   0.102 us    |          preempt_count_add();
 1)   0.097 us    |          do_raw_spin_lock();
 1)   2.173 us    |        }
 1)               |        do_wp_page() {
 1)   0.079 us    |          vm_normal_page();
 1)   0.086 us    |          reuse_swap_page();
 1)   0.076 us    |          page_move_anon_rmap();
 1)               |          unlock_page() {
 1)   0.082 us    |            page_waitqueue();
 1)   0.086 us    |            __wake_up_bit();
 1)   1.801 us    |          }
 1)   0.075 us    |          ptep_set_access_flags();
 1)               |          _raw_spin_unlock() {
 1)   0.098 us    |            do_raw_spin_unlock();
 1)   0.105 us    |            preempt_count_sub();
 1)   1.884 us    |          }
 1)   9.149 us    |        }
 1) + 13.083 us   |      }
 1)   0.146 us    |      up_read();

When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.

To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.

As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.

Cc: stable@vger.kernel.org # 3.3+
Fixes: d2d45c7a03 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-13 10:52:58 -05:00
Peter Zijlstra 6577e42a3e sched/clock: Fix up clear_sched_clock_stable()
The below tells us the static_key conversion has a problem; since the
exact point of clearing that flag isn't too important, delay the flip
and use a workqueue to process it.

[ ] TSC synchronization [CPU#0 -> CPU#22]:
[ ] Measured 8 cycles TSC warp between CPUs, turning off TSC clock.
[ ]
[ ] ======================================================
[ ] [ INFO: possible circular locking dependency detected ]
[ ] 3.13.0-rc3-01745-g848b0d0322cb-dirty #637 Not tainted
[ ] -------------------------------------------------------
[ ] swapper/0/1 is trying to acquire lock:
[ ]  (jump_label_mutex){+.+...}, at: [<ffffffff8115a637>] jump_label_lock+0x17/0x20
[ ]
[ ] but task is already holding lock:
[ ]  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109408b>] cpu_hotplug_begin+0x2b/0x60
[ ]
[ ] which lock already depends on the new lock.
[ ]
[ ]
[ ] the existing dependency chain (in reverse order) is:
[ ]
[ ] -> #1 (cpu_hotplug.lock){+.+.+.}:
[ ]        [<ffffffff810def00>] lock_acquire+0x90/0x130
[ ]        [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0
[ ]        [<ffffffff81093fdc>] get_online_cpus+0x3c/0x60
[ ]        [<ffffffff8104cc67>] arch_jump_label_transform+0x37/0x130
[ ]        [<ffffffff8115a3cf>] __jump_label_update+0x5f/0x80
[ ]        [<ffffffff8115a48d>] jump_label_update+0x9d/0xb0
[ ]        [<ffffffff8115aa6d>] static_key_slow_inc+0x9d/0xb0
[ ]        [<ffffffff810c0f65>] sched_feat_set+0xf5/0x100
[ ]        [<ffffffff810c5bdc>] set_numabalancing_state+0x2c/0x30
[ ]        [<ffffffff81d12f3d>] numa_policy_init+0x1af/0x1b7
[ ]        [<ffffffff81cebdf4>] start_kernel+0x35d/0x41f
[ ]        [<ffffffff81ceb5a5>] x86_64_start_reservations+0x2a/0x2c
[ ]        [<ffffffff81ceb6a2>] x86_64_start_kernel+0xfb/0xfe
[ ]
[ ] -> #0 (jump_label_mutex){+.+...}:
[ ]        [<ffffffff810de141>] __lock_acquire+0x1701/0x1eb0
[ ]        [<ffffffff810def00>] lock_acquire+0x90/0x130
[ ]        [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0
[ ]        [<ffffffff8115a637>] jump_label_lock+0x17/0x20
[ ]        [<ffffffff8115aa3b>] static_key_slow_inc+0x6b/0xb0
[ ]        [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20
[ ]        [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70
[ ]        [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150
[ ]        [<ffffffff81076612>] native_cpu_up+0x3a2/0x890
[ ]        [<ffffffff810941cb>] _cpu_up+0xdb/0x160
[ ]        [<ffffffff810942c9>] cpu_up+0x79/0x90
[ ]        [<ffffffff81d0af6b>] smp_init+0x60/0x8c
[ ]        [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197
[ ]        [<ffffffff8164e32e>] kernel_init+0xe/0x130
[ ]        [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0
[ ]
[ ] other info that might help us debug this:
[ ]
[ ]  Possible unsafe locking scenario:
[ ]
[ ]        CPU0                    CPU1
[ ]        ----                    ----
[ ]   lock(cpu_hotplug.lock);
[ ]                                lock(jump_label_mutex);
[ ]                                lock(cpu_hotplug.lock);
[ ]   lock(jump_label_mutex);
[ ]
[ ]  *** DEADLOCK ***
[ ]
[ ] 2 locks held by swapper/0/1:
[ ]  #0:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81094037>] cpu_maps_update_begin+0x17/0x20
[ ]  #1:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8109408b>] cpu_hotplug_begin+0x2b/0x60
[ ]
[ ] stack backtrace:
[ ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-01745-g848b0d0322cb-dirty #637
[ ] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[ ]  ffffffff82c9c270 ffff880236843bb8 ffffffff8165c5f5 ffffffff82c9c270
[ ]  ffff880236843bf8 ffffffff81658c02 ffff880236843c80 ffff8802368586a0
[ ]  ffff880236858678 0000000000000001 0000000000000002 ffff880236858000
[ ] Call Trace:
[ ]  [<ffffffff8165c5f5>] dump_stack+0x4e/0x7a
[ ]  [<ffffffff81658c02>] print_circular_bug+0x1f9/0x207
[ ]  [<ffffffff810de141>] __lock_acquire+0x1701/0x1eb0
[ ]  [<ffffffff816680ff>] ? __atomic_notifier_call_chain+0x8f/0xb0
[ ]  [<ffffffff810def00>] lock_acquire+0x90/0x130
[ ]  [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20
[ ]  [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20
[ ]  [<ffffffff81661f83>] mutex_lock_nested+0x63/0x3e0
[ ]  [<ffffffff8115a637>] ? jump_label_lock+0x17/0x20
[ ]  [<ffffffff8115a637>] jump_label_lock+0x17/0x20
[ ]  [<ffffffff8115aa3b>] static_key_slow_inc+0x6b/0xb0
[ ]  [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20
[ ]  [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70
[ ]  [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150
[ ]  [<ffffffff81076612>] native_cpu_up+0x3a2/0x890
[ ]  [<ffffffff810941cb>] _cpu_up+0xdb/0x160
[ ]  [<ffffffff810942c9>] cpu_up+0x79/0x90
[ ]  [<ffffffff81d0af6b>] smp_init+0x60/0x8c
[ ]  [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197
[ ]  [<ffffffff8164e320>] ? rest_init+0xd0/0xd0
[ ]  [<ffffffff8164e32e>] kernel_init+0xe/0x130
[ ]  [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0
[ ]  [<ffffffff8164e320>] ? rest_init+0xd0/0xd0
[ ] ------------[ cut here ]------------
[ ] WARNING: CPU: 0 PID: 1 at /usr/src/linux-2.6/kernel/smp.c:374 smp_call_function_many+0xad/0x300()
[ ] Modules linked in:
[ ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc3-01745-g848b0d0322cb-dirty #637
[ ] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010
[ ]  0000000000000009 ffff880236843be0 ffffffff8165c5f5 0000000000000000
[ ]  ffff880236843c18 ffffffff81093d8c 0000000000000000 0000000000000000
[ ]  ffffffff81ccd1a0 ffffffff810ca951 0000000000000000 ffff880236843c28
[ ] Call Trace:
[ ]  [<ffffffff8165c5f5>] dump_stack+0x4e/0x7a
[ ]  [<ffffffff81093d8c>] warn_slowpath_common+0x8c/0xc0
[ ]  [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0
[ ]  [<ffffffff81093dda>] warn_slowpath_null+0x1a/0x20
[ ]  [<ffffffff8110b72d>] smp_call_function_many+0xad/0x300
[ ]  [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30
[ ]  [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30
[ ]  [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0
[ ]  [<ffffffff8110ba96>] smp_call_function+0x46/0x80
[ ]  [<ffffffff8104f200>] ? arch_unregister_cpu+0x30/0x30
[ ]  [<ffffffff8110bb3c>] on_each_cpu+0x3c/0xa0
[ ]  [<ffffffff810ca950>] ? sched_clock_idle_sleep_event+0x20/0x20
[ ]  [<ffffffff810ca951>] ? sched_clock_tick+0x1/0xa0
[ ]  [<ffffffff8104f964>] text_poke_bp+0x64/0xd0
[ ]  [<ffffffff810ca950>] ? sched_clock_idle_sleep_event+0x20/0x20
[ ]  [<ffffffff8104ccde>] arch_jump_label_transform+0xae/0x130
[ ]  [<ffffffff8115a3cf>] __jump_label_update+0x5f/0x80
[ ]  [<ffffffff8115a48d>] jump_label_update+0x9d/0xb0
[ ]  [<ffffffff8115aa6d>] static_key_slow_inc+0x9d/0xb0
[ ]  [<ffffffff810ca775>] clear_sched_clock_stable+0x15/0x20
[ ]  [<ffffffff810503b3>] mark_tsc_unstable+0x23/0x70
[ ]  [<ffffffff810772cb>] check_tsc_sync_source+0x14b/0x150
[ ]  [<ffffffff81076612>] native_cpu_up+0x3a2/0x890
[ ]  [<ffffffff810941cb>] _cpu_up+0xdb/0x160
[ ]  [<ffffffff810942c9>] cpu_up+0x79/0x90
[ ]  [<ffffffff81d0af6b>] smp_init+0x60/0x8c
[ ]  [<ffffffff81cebf42>] kernel_init_freeable+0x8c/0x197
[ ]  [<ffffffff8164e320>] ? rest_init+0xd0/0xd0
[ ]  [<ffffffff8164e32e>] kernel_init+0xe/0x130
[ ]  [<ffffffff8166beec>] ret_from_fork+0x7c/0xb0
[ ]  [<ffffffff8164e320>] ? rest_init+0xd0/0xd0
[ ] ---[ end trace 6ff1df5620c49d26 ]---
[ ] tsc: Marking TSC unstable due to check_tsc_sync_source failed

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-v55fgqj3nnyqnngmvuu8ep6h@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 15:13:15 +01:00
Peter Zijlstra 35af99e646 sched/clock, x86: Use a static_key for sched_clock_stable
In order to avoid the runtime condition and variable load turn
sched_clock_stable into a static_key.

Also provide a shorter implementation of local_clock() and
cpu_clock(int) when sched_clock_stable==1.

                        MAINLINE   PRE       POST

    sched_clock_stable: 1          1         1
    (cold) sched_clock: 329841     221876    215295
    (cold) local_clock: 301773     234692    220773
    (warm) sched_clock: 38375      25602     25659
    (warm) local_clock: 100371     33265     27242
    (warm) rdtsc:       27340      24214     24208
    sched_clock_stable: 0          0         0
    (cold) sched_clock: 382634     235941    237019
    (cold) local_clock: 396890     297017    294819
    (warm) sched_clock: 38194      25233     25609
    (warm) local_clock: 143452     71234     71232
    (warm) rdtsc:       27345      24245     24243

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-eummbdechzz37mwmpags1gjr@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 15:13:13 +01:00
Peter Zijlstra ef08f0fff8 sched/clock: Remove local_irq_disable() from the clocks
Now that x86 no longer requires IRQs disabled for sched_clock() and
ia64 never had this requirement (it doesn't seem to do cpufreq at
all), we can remove the requirement of disabling IRQs.

                        MAINLINE   PRE        POST

    sched_clock_stable: 1          1          1
    (cold) sched_clock: 329841     257223     221876
    (cold) local_clock: 301773     309889     234692
    (warm) sched_clock: 38375      25280      25602
    (warm) local_clock: 100371     85268      33265
    (warm) rdtsc:       27340      24247      24214
    sched_clock_stable: 0          0          0
    (cold) sched_clock: 382634     301224     235941
    (cold) local_clock: 396890     399870     297017
    (warm) sched_clock: 38194      25630      25233
    (warm) local_clock: 143452     129629     71234
    (warm) rdtsc:       27345      24307      24245

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-36e5kohiasnr106d077mgubp@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 15:13:11 +01:00
Peter Zijlstra 9ea4c38006 locking: Optimize lock_bh functions
Currently all _bh_ lock functions do two preempt_count operations:

  local_bh_disable();
  preempt_disable();

and for the unlock:

  preempt_enable_no_resched();
  local_bh_enable();

Since its a waste of perfectly good cycles to modify the same variable
twice when you can do it in one go; use the new
__local_bh_{dis,en}able_ip() functions that allow us to provide a
preempt_count value to add/sub.

So define SOFTIRQ_LOCK_OFFSET as the offset a _bh_ lock needs to
add/sub to be done in one go.

As a bonus it gets rid of the preempt_enable_no_resched() usage.

This reduces a 1000 loops of:

  spin_lock_bh(&bh_lock);
  spin_unlock_bh(&bh_lock);

from 53596 cycles to 51995 cycles. I didn't do enough measurements to
say for absolute sure that the result is significant but the the few
runs I did for each suggest it is so.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:36 +01:00
Daniel Lezcano c726099ec2 sched: Factor out the on_null_domain() checks in trigger_load_balance()
The test on_null_domain is done twice in the trigger_load_balance function.

Move the test at the begin of the function, so there is only one check.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-9-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:35 +01:00
Daniel Lezcano 208cb16ba3 sched: Pass 'struct rq' to nohz_idle_balance()
The cpu information is stored in the struct rq. Pass the struct rq to
nohz_idle_balance, so all the functions called in run_rebalance_domains have
the same parameters and the 'this_cpu' variable becomes pointless.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[ Added !SMP build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-8-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:33 +01:00
Daniel Lezcano f7ed0a895e sched: Pass 'struct rq' to rebalance_domains()
The cpu information is stored in the struct rq and the caller of the
rebalance_domains function pass the cpu to retrieve the struct rq but
it already has the struct rq info. Replace the cpu parameter with the
struct rq.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-7-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:31 +01:00
Daniel Lezcano 0aeeeebac8 sched: Remove unused parameter from nohz_balancer_kick()
The cpu parameter is no longer needed in nohz_balancer_kick, let's remove
the parameter.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-6-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:30 +01:00
Daniel Lezcano 3dd0337d6d sched: Remove unused parameter from find_new_ilb()
The 'call_cpu' is never used in the function. Remove it.

Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-5-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:29 +01:00
Daniel Lezcano 63f609b160 sched: Pass 'struct rq' to on_null_domain()
The on_null_domain() function is getting the cpu to retrieve the struct rq
associated with it.

Pass 'struct rq' directly to the function as the caller already has the info.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-4-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:28 +01:00
Daniel Lezcano 4a725627f2 sched: Reduce nohz_kick_needed() parameters
The cpu information is already stored in the struct rq, so no need to pass it
as parameter to the nohz_kick_needed function.

The caller of this function just called idle_cpu() before to fill the
rq->idle_balance field.

Use rq->cpu and rq->idle_balance.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-3-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:27 +01:00
Daniel Lezcano 7caff66f36 sched: Reduce trigger_load_balance() parameters
The cpu information is already stored in the struct rq, so no need to pass it
as parameter to the trigger_load_balance function.

Cc: linaro-kernel@lists.linaro.org
Cc: preeti.lkml@gmail.com
Cc: mingo@redhat.com
Cc: peterz@infradead.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389008085-9069-2-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:26 +01:00
Peter Zijlstra de212f18e9 sched/deadline: Fix hotplug admission control
The current hotplug admission control is broken because:

  CPU_DYING -> migration_call() -> migrate_tasks() -> __migrate_task()

cannot fail and hard assumes it _will_ move all tasks off of the dying
cpu, failing this will break hotplug.

The much simpler solution is a DOWN_PREPARE handler that fails when
removing one CPU gets us below the total allocated bandwidth.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131220171343.GL2480@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:25 +01:00
Peter Zijlstra 1724813d9f sched/deadline: Remove the sysctl_sched_dl knobs
Remove the deadline specific sysctls for now. The problem with them is
that the interaction with the exisiting rt knobs is nearly impossible
to get right.

The current (as per before this patch) situation is that the rt and dl
bandwidth is completely separate and we enforce rt+dl < 100%. This is
undesirable because this means that the rt default of 95% leaves us
hardly any room, even though dl tasks are saver than rt tasks.

Another proposed solution was (a discarted patch) to have the dl
bandwidth be a fraction of the rt bandwidth. This is highly
confusing imo.

Furthermore neither proposal is consistent with the situation we
actually want; which is rt tasks ran from a dl server. In which case
the rt bandwidth is a direct subset of dl.

So whichever way we go, the introduction of dl controls at this point
is painful. Therefore remove them and instead share the rt budget.

This means that for now the rt knobs are used for dl admission control
and the dl runtime is accounted against the rt runtime. I realise that
this isn't entirely desirable either; but whatever we do we appear to
need to change the interface later, so better have a small interface
for now.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-zpyqbqds1r0vyxtxza1e7rdc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:23 +01:00
Peter Zijlstra e4099a5e92 sched/deadline: Fix up the smp-affinity mask tests
For now deadline tasks are not allowed to set smp affinity; however
the current tests are wrong, cure this.

The test in __sched_setscheduler() also uses an on-stack cpumask_t
which is a no-no.

Change both tests to use cpumask_subset() such that we test the root
domain span to be a subset of the cpus_allowed mask. This way we're
sure the tasks can always run on all CPUs they can be balanced over,
and have no effective affinity constraints.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-fyqtb1lapxca3lhsxv9cumdc@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:22 +01:00
Juri Lelli 6bfd6d72f5 sched/deadline: speed up SCHED_DEADLINE pushes with a push-heap
Data from tests confirmed that the original active load balancing
logic didn't scale neither in the number of CPU nor in the number of
tasks (as sched_rt does).

Here we provide a global data structure to keep track of deadlines
of the running tasks in the system. The structure is composed by
a bitmask showing the free CPUs and a max-heap, needed when the system
is heavily loaded.

The implementation and concurrent access scheme are kept simple by
design. However, our measurements show that we can compete with sched_rt
on large multi-CPUs machines [1].

Only the push path is addressed, the extension to use this structure
also for pull decisions is straightforward. However, we are currently
evaluating different (in order to decrease/avoid contention) data
structures to solve possibly both problems. We are also going to re-run
tests considering recent changes inside cpupri [2].

 [1] http://retis.sssup.it/~jlelli/papers/Ospert11Lelli.pdf
 [2] http://www.spinics.net/lists/linux-rt-users/msg06778.html

Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-14-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:46:46 +01:00
Dario Faggioli 332ac17ef5 sched/deadline: Add bandwidth management for SCHED_DEADLINE tasks
In order of deadline scheduling to be effective and useful, it is
important that some method of having the allocation of the available
CPU bandwidth to tasks and task groups under control.
This is usually called "admission control" and if it is not performed
at all, no guarantee can be given on the actual scheduling of the
-deadline tasks.

Since when RT-throttling has been introduced each task group have a
bandwidth associated to itself, calculated as a certain amount of
runtime over a period. Moreover, to make it possible to manipulate
such bandwidth, readable/writable controls have been added to both
procfs (for system wide settings) and cgroupfs (for per-group
settings).

Therefore, the same interface is being used for controlling the
bandwidth distrubution to -deadline tasks and task groups, i.e.,
new controls but with similar names, equivalent meaning and with
the same usage paradigm are added.

However, more discussion is needed in order to figure out how
we want to manage SCHED_DEADLINE bandwidth at the task group level.
Therefore, this patch adds a less sophisticated, but actually
very sensible, mechanism to ensure that a certain utilization
cap is not overcome per each root_domain (the single rq for !SMP
configurations).

Another main difference between deadline bandwidth management and
RT-throttling is that -deadline tasks have bandwidth on their own
(while -rt ones doesn't!), and thus we don't need an higher level
throttling mechanism to enforce the desired bandwidth.

This patch, therefore:

 - adds system wide deadline bandwidth management by means of:
    * /proc/sys/kernel/sched_dl_runtime_us,
    * /proc/sys/kernel/sched_dl_period_us,
   that determine (i.e., runtime / period) the total bandwidth
   available on each CPU of each root_domain for -deadline tasks;

 - couples the RT and deadline bandwidth management, i.e., enforces
   that the sum of how much bandwidth is being devoted to -rt
   -deadline tasks to stay below 100%.

This means that, for a root_domain comprising M CPUs, -deadline tasks
can be created until the sum of their bandwidths stay below:

    M * (sched_dl_runtime_us / sched_dl_period_us)

It is also possible to disable this bandwidth management logic, and
be thus free of oversubscribing the system up to any arbitrary level.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-12-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:46:42 +01:00
Dario Faggioli 2d3d891d33 sched/deadline: Add SCHED_DEADLINE inheritance logic
Some method to deal with rt-mutexes and make sched_dl interact with
the current PI-coded is needed, raising all but trivial issues, that
needs (according to us) to be solved with some restructuring of
the pi-code (i.e., going toward a proxy execution-ish implementation).

This is under development, in the meanwhile, as a temporary solution,
what this commits does is:

 - ensure a pi-lock owner with waiters is never throttled down. Instead,
   when it runs out of runtime, it immediately gets replenished and it's
   deadline is postponed;

 - the scheduling parameters (relative deadline and default runtime)
   used for that replenishments --during the whole period it holds the
   pi-lock-- are the ones of the waiting task with earliest deadline.

Acting this way, we provide some kind of boosting to the lock-owner,
still by using the existing (actually, slightly modified by the previous
commit) pi-architecture.

We would stress the fact that this is only a surely needed, all but
clean solution to the problem. In the end it's only a way to re-start
discussion within the community. So, as always, comments, ideas, rants,
etc.. are welcome! :-)

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Added !RT_MUTEXES build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-11-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:42:56 +01:00
Peter Zijlstra fb00aca474 rtmutex: Turn the plist into an rb-tree
Turn the pi-chains from plist to rb-tree, in the rt_mutex code,
and provide a proper comparison function for -deadline and
-priority tasks.

This is done mainly because:
 - classical prio field of the plist is just an int, which might
   not be enough for representing a deadline;
 - manipulating such a list would become O(nr_deadline_tasks),
   which might be to much, as the number of -deadline task increases.

Therefore, an rb-tree is used, and tasks are queued in it according
to the following logic:
 - among two -priority (i.e., SCHED_BATCH/OTHER/RR/FIFO) tasks, the
   one with the higher (lower, actually!) prio wins;
 - among a -priority and a -deadline task, the latter always wins;
 - among two -deadline tasks, the one with the earliest deadline
   wins.

Queueing and dequeueing functions are changed accordingly, for both
the list of a task's pi-waiters and the list of tasks blocked on
a pi-lock.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-again-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-10-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:50 +01:00
Dario Faggioli af6ace764d sched/deadline: Add latency tracing for SCHED_DEADLINE tasks
It is very likely that systems that wants/needs to use the new
SCHED_DEADLINE policy also want to have the scheduling latency of
the -deadline tasks under control.

For this reason a new version of the scheduling wakeup latency,
called "wakeup_dl", is introduced.

As a consequence of applying this patch there will be three wakeup
latency tracer:

 * "wakeup", that deals with all tasks in the system;
 * "wakeup_rt", that deals with -rt and -deadline tasks only;
 * "wakeup_dl", that deals with -deadline tasks only.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-9-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:11 +01:00
Harald Gustafsson 755378a471 sched/deadline: Add period support for SCHED_DEADLINE tasks
Make it possible to specify a period (different or equal than
deadline) for -deadline tasks. Relative deadlines (D_i) are used on
task arrivals to generate new scheduling (absolute) deadlines as "d =
t + D_i", and periods (P_i) to postpone the scheduling deadlines as "d
= d + P_i" when the budget is zero.

This is in general useful to model (and schedule) tasks that have slow
activation rates (long periods), but have to be scheduled soon once
activated (short deadlines).

Signed-off-by: Harald Gustafsson <harald.gustafsson@ericsson.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-7-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:09 +01:00
Dario Faggioli 239be4a982 sched/deadline: Add SCHED_DEADLINE avg_update accounting
Make the core scheduler and load balancer aware of the load
produced by -deadline tasks, by updating the moving average
like for sched_rt.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-6-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:08 +01:00
Juri Lelli 1baca4ce16 sched/deadline: Add SCHED_DEADLINE SMP-related data structures & logic
Introduces data structures relevant for implementing dynamic
migration of -deadline tasks and the logic for checking if
runqueues are overloaded with -deadline tasks and for choosing
where a task should migrate, when it is the case.

Adds also dynamic migrations to SCHED_DEADLINE, so that tasks can
be moved among CPUs when necessary. It is also possible to bind a
task to a (set of) CPU(s), thus restricting its capability of
migrating, or forbidding migrations at all.

The very same approach used in sched_rt is utilised:
 - -deadline tasks are kept into CPU-specific runqueues,
 - -deadline tasks are migrated among runqueues to achieve the
   following:
    * on an M-CPU system the M earliest deadline ready tasks
      are always running;
    * affinity/cpusets settings of all the -deadline tasks is
      always respected.

Therefore, this very special form of "load balancing" is done with
an active method, i.e., the scheduler pushes or pulls tasks between
runqueues when they are woken up and/or (de)scheduled.
IOW, every time a preemption occurs, the descheduled task might be sent
to some other CPU (depending on its deadline) to continue executing
(push). On the other hand, every time a CPU becomes idle, it might pull
the second earliest deadline ready task from some other CPU.

To enforce this, a pull operation is always attempted before taking any
scheduling decision (pre_schedule()), as well as a push one after each
scheduling decision (post_schedule()). In addition, when a task arrives
or wakes up, the best CPU where to resume it is selected taking into
account its affinity mask, the system topology, but also its deadline.
E.g., from the scheduling point of view, the best CPU where to wake
up (and also where to push) a task is the one which is running the task
with the latest deadline among the M executing ones.

In order to facilitate these decisions, per-runqueue "caching" of the
deadlines of the currently running and of the first ready task is used.
Queued but not running tasks are also parked in another rb-tree to
speed-up pushes.

Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-5-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:07 +01:00
Dario Faggioli aab03e05e8 sched/deadline: Add SCHED_DEADLINE structures & implementation
Introduces the data structures, constants and symbols needed for
SCHED_DEADLINE implementation.

Core data structure of SCHED_DEADLINE are defined, along with their
initializers. Hooks for checking if a task belong to the new policy
are also added where they are needed.

Adds a scheduling class, in sched/dl.c and a new policy called
SCHED_DEADLINE. It is an implementation of the Earliest Deadline
First (EDF) scheduling algorithm, augmented with a mechanism (called
Constant Bandwidth Server, CBS) that makes it possible to isolate
the behaviour of tasks between each other.

The typical -deadline task will be made up of a computation phase
(instance) which is activated on a periodic or sporadic fashion. The
expected (maximum) duration of such computation is called the task's
runtime; the time interval by which each instance need to be completed
is called the task's relative deadline. The task's absolute deadline
is dynamically calculated as the time instant a task (better, an
instance) activates plus the relative deadline.

The EDF algorithms selects the task with the smallest absolute
deadline as the one to be executed first, while the CBS ensures each
task to run for at most its runtime every (relative) deadline
length time interval, avoiding any interference between different
tasks (bandwidth isolation).
Thanks to this feature, also tasks that do not strictly comply with
the computational model sketched above can effectively use the new
policy.

To summarize, this patch:
 - introduces the data structures, constants and symbols needed;
 - implements the core logic of the scheduling algorithm in the new
   scheduling class file;
 - provides all the glue code between the new scheduling class and
   the core scheduler and refines the interactions between sched/dl
   and the other existing scheduling classes.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-4-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:06 +01:00
Dario Faggioli d50dde5a10 sched: Add new scheduler syscalls to support an extended scheduling parameters ABI
Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).

In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:

 - a (maximum/typical) instance execution time,
 - a minimum interval between consecutive instances,
 - a time constraint by which each instance must be completed.

Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.

For these reasons, this patch:

 - defines the new struct sched_attr, containing all the fields
   that are necessary for specifying a task in the computational
   model described above;

 - defines and implements the new scheduling related syscalls that
   manipulate it, i.e., sched_setattr() and sched_getattr().

Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.

Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.

Signed-off-by: Dario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:41:04 +01:00
Ingo Molnar 56b4811039 Merge branch 'sched/urgent' into sched/core
Pick up the latest fixes before applying new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:35:28 +01:00
Davidlohr Bueso b0c29f79ec futexes: Avoid taking the hb->lock if there's nothing to wake up
In futex_wake() there is clearly no point in taking the hb->lock
if we know beforehand that there are no tasks to be woken. While
the hash bucket's plist head is a cheap way of knowing this, we
cannot rely 100% on it as there is a racy window between the
futex_wait call and when the task is actually added to the
plist. To this end, we couple it with the spinlock check as
tasks trying to enter the critical region are most likely
potential waiters that will be added to the plist, thus
preventing tasks sleeping forever if wakers don't acknowledge
all possible waiters.

Furthermore, the futex ordering guarantees are preserved,
ensuring that waiters either observe the changed user space
value before blocking or is woken by a concurrent waker. For
wakers, this is done by relying on the barriers in
get_futex_key_refs() -- for archs that do not have implicit mb
in atomic_inc(), we explicitly add them through a new
futex_get_mm function. For waiters we rely on the fact that
spin_lock calls already update the head counter, so spinners
are visible even if the lock hasn't been acquired yet.

For more details please refer to the updated comments in the
code and related discussion:

  https://lkml.org/lkml/2013/11/26/556

Special thanks to tglx for careful review and feedback.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Scott Norton <scott.norton@hp.com>
Cc: Tom Vaden <tom.vaden@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1389569486-25487-5-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 11:45:21 +01:00
Thomas Gleixner 99b60ce697 futexes: Document multiprocessor ordering guarantees
That's essential, if you want to hack on futexes.

Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: Tom Vaden <tom.vaden@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1389569486-25487-4-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 11:45:19 +01:00
Davidlohr Bueso a52b89ebb6 futexes: Increase hash table size for better performance
Currently, the futex global hash table suffers from its fixed,
smallish (for today's standards) size of 256 entries, as well as
its lack of NUMA awareness. Large systems, using many futexes,
can be prone to high amounts of collisions; where these futexes
hash to the same bucket and lead to extra contention on the same
hb->lock. Furthermore, cacheline bouncing is a reality when we
have multiple hb->locks residing on the same cacheline and
different futexes hash to adjacent buckets.

This patch keeps the current static size of 16 entries for small
systems, or otherwise, 256 * ncpus (or larger as we need to
round the number to a power of 2). Note that this number of CPUs
accounts for all CPUs that can ever be available in the system,
taking into consideration things like hotpluging. While we do
impose extra overhead at bootup by making the hash table larger,
this is a one time thing, and does not shadow the benefits of
this patch.

Furthermore, as suggested by tglx, by cache aligning the hash
buckets we can avoid access across cacheline boundaries and also
avoid massive cache line bouncing if multiple cpus are hammering
away at different hash buckets which happen to reside in the
same cache line.

Also, similar to other core kernel components (pid, dcache,
tcp), by using alloc_large_system_hash() we benefit from its
NUMA awareness and thus the table is distributed among the nodes
instead of in a single one.

For a custom microbenchmark that pounds on the uaddr hashing --
making the wait path fail at futex_wait_setup() returning
-EWOULDBLOCK for large amounts of futexes, we can see the
following benefits on a 80-core, 8-socket 1Tb server:

 +---------+--------------------+------------------------+-----------------------+-------------------------------+
 | threads | baseline (ops/sec) | aligned-only (ops/sec) | large table (ops/sec) | large table+aligned (ops/sec) |
 +---------+--------------------+------------------------+-----------------------+-------------------------------+
 |     512 |              32426 | 50531  (+55.8%)        | 255274  (+687.2%)     | 292553  (+802.2%)             |
 |     256 |              65360 | 99588  (+52.3%)        | 443563  (+578.6%)     | 508088  (+677.3%)             |
 |     128 |             125635 | 200075 (+59.2%)        | 742613  (+491.1%)     | 835452  (+564.9%)             |
 |      80 |             193559 | 323425 (+67.1%)        | 1028147 (+431.1%)     | 1130304 (+483.9%)             |
 |      64 |             247667 | 443740 (+79.1%)        | 997300  (+302.6%)     | 1145494 (+362.5%)             |
 |      32 |             628412 | 721401 (+14.7%)        | 965996  (+53.7%)      | 1122115 (+78.5%)              |
 +---------+--------------------+------------------------+-----------------------+-------------------------------+

Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Waiman Long <Waiman.Long@hp.com>
Reviewed-and-tested-by: Jason Low <jason.low2@hp.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: Tom Vaden <tom.vaden@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Link: http://lkml.kernel.org/r/1389569486-25487-3-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 11:45:18 +01:00
Jason Low 0d00c7b20c futexes: Clean up various details
- Remove unnecessary head variables.
- Delete unused parameter in queue_unlock().

Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Scott Norton <scott.norton@hp.com>
Cc: Tom Vaden <tom.vaden@hp.com>
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1389569486-25487-2-git-send-email-davidlohr@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 11:45:17 +01:00
Ingo Molnar 1c62448e39 Linux 3.13-rc8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJS0miqAAoJEHm+PkMAQRiGbfgIAJSWEfo8ludknhPcHJabBtxu
 75SQAKJlL3sBVnxEc58Rtt8gsKYQIrm4IY5Slunklsn04RxuDUIQMgFoAYR5gQwz
 +Myqkw/HOqDe5VStGxtLYpWnfglxVwGDCd7ISfL9AOVy5adMWBxh4Tv+qqQc7aIZ
 eF7dy+DD+C6Q3Z5OoV8s0FZDxse29vOf17Nki7+7t8WMqyegYwjoOqNeqocGKsPi
 eHLrJgTl4T6jB4l9LKKC154DSKjKOTSwZMWgwK8mToyNLT/ufCiKgXloIjEvZZcY
 VVKUtncdHiTf+iqVojgpGBzOEeB5DM83iiapFeDiJg8C9yBzvT8lBtA9aPb5Wgw=
 =lEeV
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc8' into core/locking

Refresh the tree with the latest fixes, before applying new changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 11:44:41 +01:00
Rafael J. Wysocki 4ff913373a Merge branches 'pm-sleep', 'pm-runtime' and 'pm-apm'
* pm-sleep:
  PM / hibernate: Call platform_leave() in suspend path too
  PM / Sleep: Add macro to define common late/early system PM callbacks
  PM / hibernate: export hibernation_set_ops

* pm-runtime:
  PM / Runtime: Implement the pm_generic_runtime functions for CONFIG_PM
  PM / Runtime: Add second macro for definition of runtime PM callbacks

* pm-apm:
  apm-emulation: add hibernation APM events to support suspend2disk
2014-01-12 23:50:03 +01:00
Ingo Molnar d05d24a984 Merge branch 'fortglx/3.14/time' of git://git.linaro.org/people/john.stultz/linux into timers/core
Pull timekeeping updates from John Stultz.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 14:13:31 +01:00
Ingo Molnar dba861461f Merge branch 'linus' into timers/core
Pick up the latest fixes and refresh the branch.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 14:12:44 +01:00
Yann Droneaud a21b0b354d perf: Introduce a flag to enable close-on-exec in perf_event_open()
Unlike recent modern userspace API such as:

  epoll_create1 (EPOLL_CLOEXEC), eventfd (EFD_CLOEXEC),
  fanotify_init (FAN_CLOEXEC), inotify_init1 (IN_CLOEXEC),
  signalfd (SFD_CLOEXEC), timerfd_create (TFD_CLOEXEC),
  or the venerable general purpose open (O_CLOEXEC),

perf_event_open() syscall lack a flag to atomically set FD_CLOEXEC
(eg. close-on-exec) flag on file descriptor it returns to userspace.

The present patch adds a PERF_FLAG_FD_CLOEXEC flag to allow
perf_event_open() syscall to atomically set close-on-exec.

Having this flag will enable userspace to remove the file descriptor
from the list of file descriptors being inherited across exec,
without the need to call fcntl(fd, F_SETFD, FD_CLOEXEC) and the
associated race condition between the current thread and another
thread calling fork(2) then execve(2).

Links:

 - Secure File Descriptor Handling (Ulrich Drepper, 2008)
   http://udrepper.livejournal.com/20407.html

 - Excuse me son, but your code is leaking !!! (Dan Walsh, March 2012)
   http://danwalsh.livejournal.com/53603.html

 - Notes in DMA buffer sharing: leak and security hole
   http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/dma-buf-sharing.txt?id=v3.13-rc3#n428

Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/8c03f54e1598b1727c19706f3af03f98685d9fe6.1388952061.git.ydroneaud@opteya.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 10:16:59 +01:00
Stephane Eranian f3ae75de98 perf/x86: Fix active_entry initialization
This patch fixes a problem with the initialization of the
struct perf_event active_entry field. It is defined inside
an anonymous union and was initialized in perf_event_alloc()
using INIT_LIST_HEAD(). However at that time, we do not know
whether the event is going to use active_entry or hlist_entry (SW).
Or at last, we don't want to make that determination there.
The problem is that hlist and list_head are not initialized
the same way. One is okay with NULL (from kzmalloc), the other
needs to pointers to point to self.

This patch resolves this problem by dropping the union.
This will avoid problems later on, if someone starts using
active_entry or hlist_entry without verifying that they
actually overlap. This also solves the initialization
problem.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: vincent.weaver@maine.edu
Cc: maria.n.dimakopoulou@gmail.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389176153-3128-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 10:16:07 +01:00
John Stultz 7a06c41cbe sched_clock: Disable seqlock lockdep usage in sched_clock()
Unfortunately the seqlock lockdep enablement can't be used
in sched_clock(), since the lockdep infrastructure eventually
calls into sched_clock(), which causes a deadlock.

Thus, this patch changes all generic sched_clock() usage
to use the raw_* methods.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Reported-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1388704274-5278-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 10:14:00 +01:00
Rik van Riel 9722c2dac7 sched: Calculate effective load even if local weight is 0
Thomas Hellstrom bisected a regression where erratic 3D performance is
experienced on virtual machines as measured by glxgears. It identified
commit 58d081b5 ("sched/numa: Avoid overloading CPUs on a preferred NUMA
node") as the problem which had modified the behaviour of effective_load.

Effective load calculates the difference to the system-wide load if a
scheduling entity was moved to another CPU. The task group is not heavier
as a result of the move but overall system load can increase/decrease as a
result of the change. Commit 58d081b5 ("sched/numa: Avoid overloading CPUs
on a preferred NUMA node") changed effective_load to make it suitable for
calculating if a particular NUMA node was compute overloaded. To reduce
the cost of the function, it assumed that a current sched entity weight
of 0 was uninteresting but that is not the case.

wake_affine() uses a weight of 0 for sync wakeups on the grounds that it
is assuming the waking task will sleep and not contribute to load in the
near future. In this case, we still want to calculate the effective load
of the sched entity hierarchy. As effective_load is no longer used by
task_numa_compare since commit fb13c7ee (sched/numa: Use a system-wide
search to find swap/migration candidates), this patch simply restores the
historical behaviour.

Reported-and-tested-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
[ Wrote changelog]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140106113912.GC6178@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 09:22:15 +01:00
Chuansheng Liu 440a113603 workqueue: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to
call destroy_work_on_stack() which frees the debug object to pair
with INIT_WORK_ONSTACK().

Signed-off-by: Liu, Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-01-11 22:26:33 -05:00
Steven Rostedt (Red Hat) 405e1d8348 ftrace: Synchronize setting function_trace_op with ftrace_trace_function
ftrace_trace_function is a variable that holds what function will be called
directly by the assembly code (mcount). If just a single function is
registered and it handles recursion itself, then the assembly will call that
function directly without any helper function. It also passes in the
ftrace_op that was registered with the callback. The ftrace_op to send is
stored in the function_trace_op variable.

The ftrace_trace_function and function_trace_op needs to be coordinated such
that the called callback wont be called with the wrong ftrace_op, otherwise
bad things can happen if it expected a different op. Luckily, there's no
callback that doesn't use the helper functions that requires this. But
there soon will be and this needs to be fixed.

Use a set_function_trace_op to store the ftrace_op to set the
function_trace_op to when it is safe to do so (during the update function
within the breakpoint or stop machine calls). Or if dynamic ftrace is not
being used (static tracing) then we have to do a bit more synchronization
when the ftrace_trace_function is set as that takes affect immediately
(as oppose to dynamic ftrace doing it with the modification of the trampoline).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 22:00:25 -05:00
Steven Rostedt (Red Hat) dd97b95438 tracing: Show available event triggers when no trigger is set
Currently there's no way to know what triggers exist on a kernel without
looking at the source of the kernel or randomly trying out triggers.
Instead of creating another file in the debugfs system, simply show
what available triggers are there when cat'ing the trigger file when
it has no events:

 [root /sys/kernel/debug/tracing]# cat events/sched/sched_switch/trigger
 # Available triggers:
 # traceon traceoff snapshot stacktrace enable_event disable_event

This stays consistent with other debugfs files where meta data like
this is always proceeded with a '#' at the start of the line so that
tools can strip these out.

Link: http://lkml.kernel.org/r/20140107103548.0a84536d@gandalf.local.home

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 21:20:32 -05:00
Steven Rostedt (Red Hat) 13a1e4aef5 tracing: Consolidate event trigger code
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.

Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.

Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home

Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 21:20:07 -05:00
Steven Rostedt (Red Hat) e8dc637152 tracing: Fix counter for traceon/off event triggers
The counters for the traceon and traceoff are only suppose to decrement
when the trigger enables or disables tracing. It is not suppose to decrement
every time the event is hit.

Only decrement the counter if the trigger actually did something.

Link: http://lkml.kernel.org/r/20140106223124.0e5fd0b4@gandalf.local.home

Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 21:19:44 -05:00
Tom Zanussi 4bf0566db1 tracing: Remove double-underscore naming in syscall trigger invocations
There's no reason to use double-underscores for any variable name in
ftrace_syscall_enter()/exit(), since those functions aren't generated
and there's no need to avoid namespace collisions as with the event
macros, which is where the original invocation code came from.

Link: http://lkml.kernel.org/r/0b489c9d1f7ee315cff60fa0e4c2b433ade8ae0d.1389036657.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-06 15:22:07 -05:00
Tom Zanussi 0641d368f2 tracing/kprobes: Add trace event trigger invocations
Add code to the kprobe/kretprobe event functions that will invoke any
event triggers associated with a probe's ftrace_event_file.

The code to do this is very similar to the invocation code already
used to invoke the triggers associated with static events and
essentially replaces the existing soft-disable checks with a superset
that preserves the original behavior but adds the bits needed to
support event triggers.

Link: http://lkml.kernel.org/r/f2d49f157b608070045fdb26c9564d5a05a5a7d0.1389036657.git.tom.zanussi@linux.intel.com

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-06 15:21:43 -05:00
Bjørn Mork 362e77d1cb PM / hibernate: Call platform_leave() in suspend path too
Since create_image() only executes platform_leave() if in_suspend is
not set, enable_nonboot_cpus() is run by it with EC transactions
blocked (on ACPI systems) in the image creation code path (that is,
for in_suspend set), which may cause CPU online to fail for the CPUs
in question.  In particular, this causes the acpi_cpufreq driver's
initialization to fail for those CPUs on some systems with the
following dmesg:

 cpufreq: adding CPU 1
 acpi_cpufreq_cpu_init
 cpufreq: FREQ: 1401000 - CPU: 0
 ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [EmbeddedControl] (20130725/evregion-287)
 ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC_.EC__.LPMD] (Node ffff88023249ab28), AE_BAD_PARAMETER (20130725/psparse-536)
 ACPI Error: Method parse/execution failed [\_PR_.CPU0._PPC] (Node ffff88023270e3f8), AE_BAD_PARAMETER (20130725/psparse-536)
 ACPI Error: Method parse/execution failed [\_PR_.CPU1._PPC] (Node ffff88023270e290), AE_BAD_PARAMETER (20130725/psparse-536)
 ACPI Exception: AE_BAD_PARAMETER, Evaluating _PPC (20130725/processor_perflib-140)
 cpufreq: initialization failed
 CPU1 is up

To fix this problem, modify create_image() to execute platform_leave()
unconditionally.  [rjw: This shouldn't lead to any significant side
effects on ACPI systems.]

Signed-off-by: Bjørn Mork <bjorn@mork.no>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-06 14:08:39 +01:00
Namhyung Kim e0d18fe063 tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
When kprobe-based dynamic event tracer is not enabled, it caused
following build error:

   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8dd): undefined reference to `fetch_symbol_u8'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8e9): undefined reference to `fetch_symbol_u16'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c8f5): undefined reference to `fetch_symbol_u32'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c901): undefined reference to `fetch_symbol_u64'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c909): undefined reference to `fetch_symbol_string'
   kernel/built-in.o: In function `traceprobe_update_arg':
   (.text+0x10c913): undefined reference to `fetch_symbol_string_size'
   ...

It was due to the fetch methods are referred from CHECK_FETCH_FUNCS
macro and since it was only defined in trace_kprobe.c.  Move NULL
definition of such fetch functions to the header file.

Note, it also requires CONFIG_BRANCH_PROFILING enabled to trigger
this failure as well. This is because the "fetch_symbol_*" variables
are referenced in a "else if" statement that will only call
update_symbol_cache(), which is a static inline stub function
when CONFIG_KPROBE_EVENT is not enabled. gcc is smart enough
to optimize this "else if" out and that also removes the code that
references the undefined variables.

But when BRANCH_PROFILING is enabled, it fools gcc into keeping
the if statement around and thus references the undefined symbols
and fails to build.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-03 15:27:18 -05:00
Namhyung Kim b7e0bf341f tracing/uprobes: Add @+file_offset fetch method
Enable to fetch data from a file offset.  Currently it only supports
fetching from same binary uprobe set.  It'll translate the file offset
to a proper virtual address in the process.

The syntax is "@+OFFSET" as it does similar to normal memory fetching
(@ADDR) which does no address translation.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 20:57:05 -05:00
Oleg Nesterov 72fd293aa9 uprobes: Allocate ->utask before handler_chain() for tracing handlers
uprobe_trace_print() and uprobe_perf_print() need to pass the additional
info to call_fetch() methods, currently there is no simple way to do this.

current->utask looks like a natural place to hold this info, but we need
to allocate it before handler_chain().

This is a bit unfortunate, perhaps we will find a better solution later,
but this is simple and should work right now.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 20:57:04 -05:00
Namhyung Kim b079d374fd tracing/uprobes: Add support for full argument access methods
Enable to fetch other types of argument for the uprobes.  IOW, we can
access stack, memory, deref, bitfield and retval from uprobes now.

The format for the argument types are same as kprobes (but @SYMBOL
type is not supported for uprobes), i.e:

  @ADDR   : Fetch memory at ADDR
  $stackN : Fetch Nth entry of stack (N >= 0)
  $stack  : Fetch stack address
  $retval : Fetch return value
  +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address

Note that the retval only can be used with uretprobes.

Original-patch-by: Hyeoncheol Lee <cheol.lee@lge.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 20:56:21 -05:00
Namhyung Kim dcad1a204f tracing/uprobes: Fetch args before reserving a ring buffer
Fetching from user space should be done in a non-atomic context.  So
use a per-cpu buffer and copy its content to the ring buffer
atomically.  Note that we can migrate during accessing user memory
thus use a per-cpu mutex to protect concurrent accesses.

This is needed since we'll be able to fetch args from an user memory
which can be swapped out.  Before that uprobes could fetch args from
registers only which saved in a kernel space.

While at it, use __get_data_size() and store_trace_args() to reduce
code duplication.  And add struct uprobe_cpu_buffer and its helpers as
suggested by Oleg.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:44 -05:00
Namhyung Kim a4734145a4 tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
Currently uprobes don't pass is_return to the argument parser so that
it cannot make use of "$retval" fetch method since it only works for
return probes.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:43 -05:00
Namhyung Kim 5baaa59ef0 tracing/probes: Implement 'memory' fetch method for uprobes
Use separate method to fetch from memory.  Move existing functions to
trace_kprobe.c and make them static.  Also add new memory fetch
implementation for uprobes.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:43 -05:00
Hyeoncheol Lee 3925f4a5af tracing/probes: Add fetch{,_size} member into deref fetch method
The deref fetch methods access a memory region but it assumes that
it's a kernel memory since uprobes does not support them.

Add ->fetch and ->fetch_size member in order to provide a proper
access methods for supporting uprobes.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Hyeoncheol Lee <cheol.lee@lge.com>
[namhyung@kernel.org: Split original patch into pieces as requested]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:42 -05:00
Namhyung Kim 1301a44e77 tracing/probes: Move 'symbol' fetch method to kprobes
Move existing functions to trace_kprobe.c and add NULL entries to the
uprobes fetch type table.  I don't make them static since some generic
routines like update/free_XXX_fetch_param() require pointers to the
functions.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:41 -05:00
Namhyung Kim 3fd996a295 tracing/probes: Implement 'stack' fetch method for uprobes
Use separate method to fetch from stack.  Move existing functions to
trace_kprobe.c and make them static.  Also add new stack fetch
implementation for uprobes.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:40 -05:00
Namhyung Kim 34fee3a104 tracing/probes: Split [ku]probes_fetch_type_table
Use separate fetch_type_table for kprobes and uprobes.  It currently
shares all fetch methods but some of them will be implemented
differently later.

This is not to break build if [ku]probes is configured alone (like
!CONFIG_KPROBE_EVENT and CONFIG_UPROBE_EVENT).  So I added '__weak'
to the table declaration so that it can be safely omitted when it
configured out.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:39 -05:00
Namhyung Kim b26c74e116 tracing/probes: Move fetch function helpers to trace_probe.h
Move fetch function helper macros/functions to the header file and
make them external.  This is preparation of supporting uprobe fetch
table in next patch.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:38 -05:00
Namhyung Kim 5bf652aaf4 tracing/probes: Integrate duplicate set_print_fmt()
The set_print_fmt() functions are implemented almost same for
[ku]probes.  Move it to a common place and get rid of the duplication.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:38 -05:00
Namhyung Kim 2dc1018372 tracing/kprobes: Move common functions to trace_probe.h
The __get_data_size() and store_trace_args() will be used by uprobes
too.  Move them to a common location.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:37 -05:00
Namhyung Kim 14577c3992 tracing/uprobes: Convert to struct trace_probe
Convert struct trace_uprobe to make use of the common trace_probe
structure.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:36 -05:00
Namhyung Kim c31ffb3ff6 tracing/kprobes: Factor out struct trace_probe
There are functions that can be shared to both of kprobes and uprobes.
Separate common data structure to struct trace_probe and use it from
the shared functions.

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:29 -05:00
Namhyung Kim 50eb2672ce tracing/probes: Fix basic print type functions
The print format of s32 type was "ld" and it's casted to "long".  So
it turned out to print 4294967295 for "-1" on 64-bit systems.  Not
sure whether it worked well on 32-bit systems.

Anyway, it doesn't need to have cast argument at all since it already
casted using type pointer - just get rid of it.  Thanks to Oleg for
pointing that out.

And print 0x prefix for unsigned type as it shows hex numbers.

Suggested-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:24 -05:00
Namhyung Kim 306cfe2025 tracing/uprobes: Fix documentation of uprobe registration syntax
The uprobe syntax requires an offset after a file path not a symbol.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2014-01-02 16:17:23 -05:00
Steven Rostedt (Red Hat) d8a30f2034 tracing: Fix rcu handling of event_trigger_data filter field
The filter field of the event_trigger_data structure is protected under
RCU sched locks. It was not annotated as such, and after doing so,
sparse pointed out several locations that required fix ups.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-02 16:17:22 -05:00
Steven Rostedt (Red Hat) 098c879e1f tracing: Add generic tracing_lseek() function
Trace event triggers added a lseek that uses the ftrace_filter_lseek()
function. Unfortunately, when function tracing is not configured in
that function is not defined and the kernel fails to build.

This is the second time that function was added to a file ops and
it broke the build due to requiring special config dependencies.

Make a generic tracing_lseek() that all the tracing utilities may
use.

Also, modify the old ftrace_filter_lseek() to return 0 instead of
1 on WRONLY. Not sure why it was a 1 as that does not make sense.

This also changes the old tracing_seek() to modify the file pos
pointer on WRONLY as well.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-02 16:17:12 -05:00
Jens Axboe b28bc9b38c Linux 3.13-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
 189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
 LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
 k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
 eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
 YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
 =/4/R
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc6' into for-3.14/core

Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.

Fixup merge issues related to the immutable biovec changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Conflicts:
	block/blk-flush.c
	fs/btrfs/check-integrity.c
	fs/btrfs/extent_io.c
	fs/btrfs/scrub.c
	fs/logfs/dev_bdev.c
2013-12-31 09:51:02 -07:00
Rafael J. Wysocki fbd2240216 Merge back earlier 'pm-sleep' material. 2013-12-30 01:53:57 +01:00
Linus Torvalds bddffa28dc ACPI and power management fixes and new device IDs for 3.13-rc6
- Fix for a cpufreq regression causing stale sysfs files to be left
   behind during system resume if cpufreq_add_dev() fails for one or
   more CPUs from Viresh Kumar.
 
 - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be
   ignored when the intel_pstate driver is used from Jason Baron.
 
 - System suspend fix for a memory leak in pm_vt_switch_unregister()
   that forgot to release objects after removing them from
   pm_vt_switch_list.  From Masami Ichikawa.
 
 - Intel Valley View device ID and energy unit encoding update for the
   (recently added) Intel RAPL (Running Average Power Limit) driver
   from Jacob Pan.
 
 - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power
   Subsystem (LPSS) ACPI driver from Paul Drews.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSvh9MAAoJEILEb/54YlRxfJoQAJFzcqXlYsROgPSlYVEG0F80
 Cop0MbYC/gr8XNiLXWGIRVVYHbxMNeAPk5vUPZg4E9L6cOeazwjFtnRB/Av3FpVo
 XReYHpLbJXJ3VaVyJiw0tCHp/Ukw8Ds0VcURi8RdcrQdkmyXPtbfWcrE+7GmuA2z
 jnZOJviws+mTnxdEHtaml2iZMM5jwvUmUeh3iytc8zOC3QR4I7cLkKnYNTrQatqZ
 qYxu5e9VAKuTXBv7BeNHiViakKhoWPx0S3nKofoiOG5hGwg49HGVlJ3pH9CCfIli
 jA1NpXOGyKzYLJv2fJPtgxQ+l7Mb8wu9hGbPJWaUI3MRa9vIxNok6qzYwAQcfCWD
 p4iugfsaatyKbBSBu+mntczCM7wsl2+/gH3gWfDySRpxq8G9At1dduO9GMeD/pDi
 QhYlFl0obR05F6R0hlkk2Pahx+5x5nub7dM2+8Oh+r8k6TlkFRg+BKe21MJGz/45
 BHBmJkNkLpdUNKT2GhaQK6rhc5TSln3eYGjYDRRhRmV6/4US/hI1MtY6HYg2uWbk
 J3xiMcUXAY/0DzC1zDzvwr4Cc+WRdNXbZGKmmhyc+fxEmjZZVGanfmqC0JFV3gni
 32v1krQA8v3KANz2xjvnNwNLQzSypgVOHihUbPN34FGaE7fxp6PWqxwhRD6RyywK
 gtIHNSZ0mKnmIR6oxq1a
 =vQDX
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes and new device IDs from Rafael Wysocki:

 - Fix for a cpufreq regression causing stale sysfs files to be left
   behind during system resume if cpufreq_add_dev() fails for one or
   more CPUs from Viresh Kumar.

 - Fix for a bug in cpufreq causing CONFIG_CPU_FREQ_DEFAULT_* to be
   ignored when the intel_pstate driver is used from Jason Baron.

 - System suspend fix for a memory leak in pm_vt_switch_unregister()
   that forgot to release objects after removing them from
   pm_vt_switch_list.  From Masami Ichikawa.

 - Intel Valley View device ID and energy unit encoding update for the
   (recently added) Intel RAPL (Running Average Power Limit) driver from
   Jacob Pan.

 - Intel Bay Trail SoC GPIO and ACPI device IDs for the Low Power
   Subsystem (LPSS) ACPI driver from Paul Drews.

* tag 'pm+acpi-3.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  powercap / RAPL: add support for ValleyView Soc
  PM / sleep: Fix memory leak in pm_vt_switch_unregister().
  cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers
  cpufreq: remove sysfs files for CPUs which failed to come back after resume
  ACPI: Add BayTrail SoC GPIO and LPSS ACPI IDs
2013-12-29 13:27:51 -08:00
Rafael J. Wysocki 1a6725359e Merge branches 'pm-cpufreq' and 'pm-sleep' containing PM fixes
* pm-cpufreq:
  cpufreq: Use CONFIG_CPU_FREQ_DEFAULT_* to set initial policy for setpolicy drivers
  cpufreq: remove sysfs files for CPUs which failed to come back after resume

* pm-sleep:
  PM / sleep: Fix memory leak in pm_vt_switch_unregister().
2013-12-27 00:42:27 +01:00
Linus Torvalds 70e672fa73 Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
 "Two fixes.  One fixes a bug in the error path of cgroup_create().  The
  other changes cgrp->id lifetime rule so that the id doesn't get
  recycled before all controller states are destroyed.  This premature
  id recycling made memcg malfunction"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: don't recycle cgroup id until all csses' have been destroyed
  cgroup: fix cgroup_create() error handling path
2013-12-24 09:49:20 -08:00
Linus Torvalds 4b69316ede Merge branch 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "There's one interseting commit - "libata, freezer: avoid block device
  removal while system is frozen".  It's an ugly hack working around a
  deadlock condition between driver core resume and block layer device
  removal paths through freezer which was made more reproducible by
  writeback being converted to workqueue some releases ago.  The bug has
  nothing to do with libata but it's just an workaround which is easy to
  backport.  After discussion, Rafael and I seem to agree that we don't
  really need kernel freezables - both kthread and workqueue.  There are
  few specific workqueues which constitute PM operations and require
  freezing, which will be converted to use workqueue_set_max_active()
  instead.  All other kernel freezer uses are planned to be removed,
  followed by the removal of kthread and workqueue freezer support,
  hopefully.

  Others are device-specific fixes.  The most notable is the addition of
  NO_NCQ_TRIM which is used to disable queued TRIM commands to Micro
  M500 SSDs which otherwise suffers data corruption"

* 'for-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata, freezer: avoid block device removal while system is frozen
  libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs
  libata: disable a disk via libata.force params
  ahci: bail out on ICH6 before using AHCI BAR
  ahci: imx: Explicitly clear IMX6Q_GPR13_SATA_MPLL_CLK_EN
  libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8
2013-12-24 09:35:58 -08:00
John Stultz 38aef31ce7 timekeeping: Remove comment that's mostly out of date
Prior to 92bb1fcf57 (Only
do nanosecond rounding on GENERIC_TIME_VSYSCALL_OLD
systems), the comment here was accuate, but now we can
mostly avoid the extra rounding which causes the unlikey
to be actually likely here.

So remove the out of date comment.

Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 12:53:22 -08:00
Yijing Wang d26e4fe0db timekeeper: fix comment typo for tk_setup_internals()
Fix trivial comment typo for tk_setup_internals().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:54:35 -08:00
John Stultz 330a1617b0 timekeeping: Fix missing timekeeping_update in suspend path
Since 48cdc135d4 (Implement a shadow timekeeper), we have to
call timekeeping_update() after any adjustment to the timekeeping
structure in order to make sure that any adjustments to the structure
persist.

In the timekeeping suspend path, we udpate the timekeeper
structure, so we should be sure to update the shadow-timekeeper
before releasing the timekeeping locks. Currently this isn't done.

In most cases, the next time related code to run would be
timekeeping_resume, which does update the shadow-timekeeper, but
in an abundence of caution, this patch adds the call to
timekeeping_update() in the suspend path.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org> #3.10+
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:54:35 -08:00
John Stultz 04005f6011 timekeeping: Fix CLOCK_TAI timer/nanosleep delays
A think-o in the calculation of the monotonic -> tai time offset
results in CLOCK_TAI timers and nanosleeps to expire late (the
latency is ~2x the tai offset).

Fix this by adding the tai offset from the realtime offset instead
of subtracting.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org> #3.10+
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:54:34 -08:00
John Stultz 47a1b79630 tick/timekeeping: Call update_wall_time outside the jiffies lock
Since the xtime lock was split into the timekeeping lock and
the jiffies lock, we no longer need to call update_wall_time()
while holding the jiffies lock.

Thus, this patch splits update_wall_time() out from do_timer().

This allows us to get away from calling clock_was_set_delayed()
in update_wall_time() and instead use the standard clock_was_set()
call that previously would deadlock, as it causes the jiffies lock
to be acquired.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:54:32 -08:00
John Stultz 6fdda9a9c5 timekeeping: Avoid possible deadlock from clock_was_set_delayed
As part of normal operaions, the hrtimer subsystem frequently calls
into the timekeeping code, creating a locking order of
  hrtimer locks -> timekeeping locks

clock_was_set_delayed() was suppoed to allow us to avoid deadlocks
between the timekeeping the hrtimer subsystem, so that we could
notify the hrtimer subsytem the time had changed while holding
the timekeeping locks. This was done by scheduling delayed work
that would run later once we were out of the timekeeing code.

But unfortunately the lock chains are complex enoguh that in
scheduling delayed work, we end up eventually trying to grab
an hrtimer lock.

Sasha Levin noticed this in testing when the new seqlock lockdep
enablement triggered the following (somewhat abrieviated) message:

[  251.100221] ======================================================
[  251.100221] [ INFO: possible circular locking dependency detected ]
[  251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted
[  251.101967] -------------------------------------------------------
[  251.101967] kworker/10:1/4506 is trying to acquire lock:
[  251.101967]  (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70
[  251.101967]
[  251.101967] but task is already holding lock:
[  251.101967]  (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[  251.101967]
[  251.101967] which lock already depends on the new lock.
[  251.101967]
[  251.101967]
[  251.101967] the existing dependency chain (in reverse order) is:
[  251.101967]
-> #5 (hrtimer_bases.lock#11){-.-...}:
[snipped]
-> #4 (&rt_b->rt_runtime_lock){-.-...}:
[snipped]
-> #3 (&rq->lock){-.-.-.}:
[snipped]
-> #2 (&p->pi_lock){-.-.-.}:
[snipped]
-> #1 (&(&pool->lock)->rlock){-.-...}:
[  251.101967]        [<ffffffff81194803>] validate_chain+0x6c3/0x7b0
[  251.101967]        [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580
[  251.101967]        [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0
[  251.101967]        [<ffffffff84398500>] _raw_spin_lock+0x40/0x80
[  251.101967]        [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0
[  251.101967]        [<ffffffff81154168>] queue_work_on+0x98/0x120
[  251.101967]        [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30
[  251.101967]        [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160
[  251.101967]        [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70
[  251.101967]        [<ffffffff843a4b49>] ia32_sysret+0x0/0x5
[  251.101967]
-> #0 (timekeeper_seq){----..}:
[snipped]
[  251.101967] other info that might help us debug this:
[  251.101967]
[  251.101967] Chain exists of:
  timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11

[  251.101967]  Possible unsafe locking scenario:
[  251.101967]
[  251.101967]        CPU0                    CPU1
[  251.101967]        ----                    ----
[  251.101967]   lock(hrtimer_bases.lock#11);
[  251.101967]                                lock(&rt_b->rt_runtime_lock);
[  251.101967]                                lock(hrtimer_bases.lock#11);
[  251.101967]   lock(timekeeper_seq);
[  251.101967]
[  251.101967]  *** DEADLOCK ***
[  251.101967]
[  251.101967] 3 locks held by kworker/10:1/4506:
[  251.101967]  #0:  (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[  251.101967]  #1:  (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[  251.101967]  #2:  (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[  251.101967]
[  251.101967] stack backtrace:
[  251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053
[  251.101967] Workqueue: events clock_was_set_work

So the best solution is to avoid calling clock_was_set_delayed() while
holding the timekeeping lock, and instead using a flag variable to
decide if we should call clock_was_set() once we've released the locks.

This works for the case here, where the do_adjtimex() was the deadlock
trigger point. Unfortuantely, in update_wall_time() we still hold
the jiffies lock, which would deadlock with the ipi triggered by
clock_was_set(), preventing us from calling it even after we drop the
timekeeping lock. So instead call clock_was_set_delayed() at that point.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: stable <stable@vger.kernel.org> #3.10+
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:53:33 -08:00
John Stultz 5258d3f25c timekeeping: Fix potential lost pv notification of time change
In 780427f0e1 (Indicate that clock was set in the pvclock
gtod notifier), logic was added to pass a CLOCK_WAS_SET
notification to the pvclock notifier chain.

While that patch added a action flag returned from
accumulate_nsecs_to_secs(), it only uses the returned value
in one location, and not in the logarithmic accumulation.

This means if a leap second triggered during the logarithmic
accumulation (which is most likely where it would happen),
the notification that the clock was set would not make it to
the pv notifiers.

This patch extends the logarithmic_accumulation pass down
that action flag so proper notification will occur.

This patch also changes the varialbe action -> clock_set
per Ingo's suggestion.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: <xen-devel@lists.xen.org>
Cc: stable <stable@vger.kernel.org> #3.11+
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:53:26 -08:00
John Stultz f55c07607a timekeeping: Fix lost updates to tai adjustment
Since 48cdc135d4 (Implement a shadow timekeeper), we have to
call timekeeping_update() after any adjustment to the timekeeping
structure in order to make sure that any adjustments to the structure
persist.

Unfortunately, the updates to the tai offset via adjtimex do not
trigger this update, causing adjustments to the tai offset to be
made and then over-written by the previous value at the next
update_wall_time() call.

This patch resovles the issue by calling timekeeping_update()
right after setting the tai offset.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable <stable@vger.kernel.org> #3.10+
Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-12-23 11:47:35 -08:00
Tom Zanussi bac5fb97a1 tracing: Add and use generic set_trigger_filter() implementation
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:17 -05:00
Steven Rostedt (Red Hat) 2875a08b2d tracing: Move ftrace_event_file() out of DYNAMIC_FTRACE ifdef
Now that event triggers use ftrace_event_file(), it needs to be outside
the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is
not defined.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:17 -05:00
Tom Zanussi 7862ad1846 tracing: Add 'enable_event' and 'disable_event' event trigger commands
Add 'enable_event' and 'disable_event' event_command commands.

enable_event and disable_event event triggers are added by the user
via these commands in a similar way and using practically the same
syntax as the analagous 'enable_event' and 'disable_event' ftrace
function commands, but instead of writing to the set_ftrace_filter
file, the enable_event and disable_event triggers are written to the
per-event 'trigger' files:

    echo 'enable_event:system:event' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event' > .../othersys/otherevent/trigger

The above commands will enable or disable the 'system:event' trace
events whenever the othersys:otherevent events are hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
    echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will enable or disable the 'system:event'
trace events whenever the othersys:otherevent events are hit, but only
N times.

This also makes the find_event_file() helper function extern, since
it's useful to use from other places, such as the event triggers code,
so make it accessible.

Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:16 -05:00
Tom Zanussi f21ecbb35f tracing: Add 'stacktrace' event trigger command
Add 'stacktrace' event_command.  stacktrace event triggers are added
by the user via this command in a similar way and using practically
the same syntax as the analogous 'stacktrace' ftrace function command,
but instead of writing to the set_ftrace_filter file, the stacktrace
event trigger is written to the per-event 'trigger' files:

    echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger

The above command will turn on stacktraces for someevent i.e. whenever
someevent is hit, a stacktrace will be logged.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will log N stacktraces for someevent i.e. whenever
someevent is hit N times, a stacktrace will be logged.

Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:15 -05:00
Tom Zanussi 93e31ffbf4 tracing: Add 'snapshot' event trigger command
Add 'snapshot' event_command.  snapshot event triggers are added by
the user via this command in a similar way and using practically the
same syntax as the analogous 'snapshot' ftrace function command, but
instead of writing to the set_ftrace_filter file, the snapshot event
trigger is written to the per-event 'trigger' files:

    echo 'snapshot' > .../somesys/someevent/trigger

The above command will turn on snapshots for someevent i.e. whenever
someevent is hit, a snapshot will be done.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'snapshot:N' > .../somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above command will snapshot N times for someevent i.e. whenever
someevent is hit N times, a snapshot will be done.

Also adds a new tracing_alloc_snapshot() function - the existing
tracing_snapshot_alloc() function is a special version of
tracing_snapshot() that also does the snapshot allocation - the
snapshot triggers would like to be able to do just the allocation but
not take a snapshot; the existing tracing_snapshot_alloc() in turn now
also calls tracing_alloc_snapshot() underneath to do that allocation.

Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
[ fix up from kbuild test robot <fengguang.wu@intel.com report ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:01:22 -05:00
Masami Ichikawa c606850407 PM / sleep: Fix memory leak in pm_vt_switch_unregister().
kmemleak reported a memory leak as below.

unreferenced object 0xffff880118f14700 (size 32):
  comm "swapper/0", pid 1, jiffies 4294877401 (age 123.283s)
  hex dump (first 32 bytes):
    00 01 10 00 00 00 ad de 00 02 20 00 00 00 ad de  .......... .....
    00 d4 d2 18 01 88 ff ff 01 00 00 00 00 04 00 00  ................
  backtrace:
    [<ffffffff814edb1e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811889dc>] kmem_cache_alloc_trace+0x1ec/0x260
    [<ffffffff810aba66>] pm_vt_switch_required+0x76/0xb0
    [<ffffffff812f39f5>] register_framebuffer+0x195/0x320
    [<ffffffff8130af18>] efifb_probe+0x718/0x780
    [<ffffffff81391495>] platform_drv_probe+0x45/0xb0
    [<ffffffff8138f407>] driver_probe_device+0x87/0x3a0
    [<ffffffff8138f7f3>] __driver_attach+0x93/0xa0
    [<ffffffff8138d413>] bus_for_each_dev+0x63/0xa0
    [<ffffffff8138ee5e>] driver_attach+0x1e/0x20
    [<ffffffff8138ea40>] bus_add_driver+0x180/0x250
    [<ffffffff8138fe74>] driver_register+0x64/0xf0
    [<ffffffff813913ba>] __platform_driver_register+0x4a/0x50
    [<ffffffff8191e028>] efifb_driver_init+0x12/0x14
    [<ffffffff8100214a>] do_one_initcall+0xfa/0x1b0
    [<ffffffff818e40e0>] kernel_init_freeable+0x17b/0x201

In pm_vt_switch_required(), "entry" variable is allocated via kmalloc().
So, in pm_vt_switch_unregister(), it needs to call kfree() when object
is deleted from list.

Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-22 00:56:35 +01:00
Tom Zanussi 2a2df32115 tracing: Add 'traceon' and 'traceoff' event trigger commands
Add 'traceon' and 'traceoff' event_command commands.  traceon and
traceoff event triggers are added by the user via these commands in a
similar way and using practically the same syntax as the analagous
'traceon' and 'traceoff' ftrace function commands, but instead of
writing to the set_ftrace_filter file, the traceon and traceoff
triggers are written to the per-event 'trigger' files:

    echo 'traceon' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff' > .../tracing/events/somesys/someevent/trigger

The above command will turn tracing on or off whenever someevent is
hit.

This also adds a 'count' version that limits the number of times the
command will be invoked:

    echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
    echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger

Where N is the number of times the command will be invoked.

The above commands will will turn tracing on or off whenever someevent
is hit, but only N times.

Some common register/unregister_trigger() implementations of the
event_command reg()/unreg() callbacks are also provided, which add and
remove trigger instances to the per-event list of triggers, and
arm/disarm them as appropriate.  event_trigger_callback() is a
general-purpose event_command func() implementation that orchestrates
command parsing and registration for most normal commands.

Most event commands will use these, but some will override and
possibly reuse them.

The event_trigger_init(), event_trigger_free(), and
event_trigger_print() functions are meant to be common implementations
of the event_trigger_ops init(), free(), and print() ops,
respectively.

Most trigger_ops implementations will use these, but some will
override and possibly reuse them.

Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:24 -05:00
Tom Zanussi 85f2b08268 tracing: Add basic event trigger framework
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.

'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.

The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.

The event trigger functionality is built on top of SOFT_DISABLE
functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires.  Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that.  Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function.  Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.

The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.

The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.

The standard open, read, and release file operations are implemented
here.

The open() implementation sets up for the various open modes of the
'trigger' file.  It creates and attaches the trigger iterator and sets
up the command parser.  If opened for reading set up the trigger
seq_ops.

The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.

The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.

A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.

also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.

A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations.  They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.

The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event.  It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.

Every event_command func() implementation essentially does the
same thing for any command:

   - choose ops - use the value of param to choose either a number or
     count version of event_trigger_ops specific to the command
   - do the register or unregister of those ops
   - associate a filter, if specified, with the triggering event

The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized.  When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite.  The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.

Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.

The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions.  This allows func()
implementations to use command-specific blobs and supports code
re-use.

The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked.  The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.

This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.

Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:22 -05:00
Kirill A. Shutemov 597d795a2a mm: do not allocate page->ptl dynamically, if spinlock_t fits to long
In struct page we have enough space to fit long-size page->ptl there,
but we use dynamically-allocated page->ptl if size(spinlock_t) is larger
than sizeof(int).

It hurts 64-bit architectures with CONFIG_GENERIC_LOCKBREAK, where
sizeof(spinlock_t) == 8, but it easily fits into struct page.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-20 12:25:45 -08:00
Linus Torvalds 5263f0a880 This fixes a long standing bug in the ftrace profiler.
The problem is that the profiler only initializes the online
 CPUs, and not possible CPUs. This causes issues if the user takes
 CPUs online or offline while the profiler is running.
 
 If we online a CPU after starting the profiler, we lose all the
 trace information on the CPU going online.
 
 If we offline a CPU after running a test and start a new test, it
 will not clear the old data from that CPU.
 
 This bug causes incorrect data to be reported to the user if they
 online or offline CPUs during the profiling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSsNBHAAoJEKQekfcNnQGuKP8H/2mol/d7z2vANh7/FeNjTKIN
 VkRzDEwUIwoaJBsL75EDDXBFx7w8jjAsXyoTrqrvMRV4UNcsfm46mohQTPAmK39y
 muqodL1VnVXdKrUmtw/1nL7yDi2KltQH1UwOgvwXGuUFIq5cuCXNQxNK9/1fVVVn
 tIMNz5kEAG3XCwnqP0PgQxWCuA7s+aQR0ijTf4vPf1G3IJujPyG9VhJWcGS3dJTR
 t8TPyatd9D/S+7/r7iZ9hS8nWpaka3qJfhiWqk16SC9LiUXVA8oFOVMoN7n6Co5E
 6r2dNo01WOABlojCxi1t3afUtcV1bUjBnVkiDva5cSc84pQSxe1qRrIpjTmHk00=
 =MSZs
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "This fixes a long standing bug in the ftrace profiler.  The problem is
  that the profiler only initializes the online CPUs, and not possible
  CPUs.  This causes issues if the user takes CPUs online or offline
  while the profiler is running.

  If we online a CPU after starting the profiler, we lose all the trace
  information on the CPU going online.

  If we offline a CPU after running a test and start a new test, it will
  not clear the old data from that CPU.

  This bug causes incorrect data to be reported to the user if they
  online or offline CPUs during the profiling"

* tag 'trace-fixes-v3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Initialize the ftrace profiler for each possible cpu
2013-12-20 09:32:30 -08:00
Tejun Heo 85fbd722ad libata, freezer: avoid block device removal while system is frozen
Freezable kthreads and workqueues are fundamentally problematic in
that they effectively introduce a big kernel lock widely used in the
kernel and have already been the culprit of several deadlock
scenarios.  This is the latest occurrence.

During resume, libata rescans all the ports and revalidates all
pre-existing devices.  If it determines that a device has gone
missing, the device is removed from the system which involves
invalidating block device and flushing bdi while holding driver core
layer locks.  Unfortunately, this can race with the rest of device
resume.  Because freezable kthreads and workqueues are thawed after
device resume is complete and block device removal depends on
freezable workqueues and kthreads (e.g. bdi_wq, jbd2) to make
progress, this can lead to deadlock - block device removal can't
proceed because kthreads are frozen and kthreads can't be thawed
because device resume is blocked behind block device removal.

839a8e8660 ("writeback: replace custom worker pool implementation
with unbound workqueue") made this particular deadlock scenario more
visible but the underlying problem has always been there - the
original forker task and jbd2 are freezable too.  In fact, this is
highly likely just one of many possible deadlock scenarios given that
freezer behaves as a big kernel lock and we don't have any debug
mechanism around it.

I believe the right thing to do is getting rid of freezable kthreads
and workqueues.  This is something fundamentally broken.  For now,
implement a funny workaround in libata - just avoid doing block device
hot[un]plug while the system is frozen.  Kernel engineering at its
finest.  :(

v2: Add EXPORT_SYMBOL_GPL(pm_freezing) for cases where libata is built
    as a module.

v3: Comment updated and polling interval changed to 10ms as suggested
    by Rafael.

v4: Add #ifdef CONFIG_FREEZER around the hack as pm_freezing is not
    defined when FREEZER is not configured thus breaking build.
    Reported by kbuild test robot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Tomaž Šolc <tomaz.solc@tablix.org>
Reviewed-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=62801
Link: http://lkml.kernel.org/r/20131213174932.GA27070@htj.dyndns.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Cc: kbuild test robot <fengguang.wu@intel.com>
2013-12-19 13:50:32 -05:00
Linus Torvalds f7556698a3 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
 "An RT group-scheduling fix and the sched-domains topology setup fix
  from Mel"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix rq's cpupri leak while enqueue/dequeue child RT entities
  sched: Assign correct scheduling domain to 'sd_llc'
2013-12-19 09:11:22 -08:00