Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
When CONFIRMED_R is set, the client throws away the sequence ID
returned by the server. During a Transparent State Migration, however
there's no other way for the client to know what sequence ID to use
with a lease that's been migrated.
Therefore, the client must save and use the contrived slot sequence
value returned by the destination server even when CONFIRMED_R is
set.
Note that some servers always return a seqid of 1 after a migration.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Transparent State Migration copies a client's lease state from the
server where a filesystem used to reside to the server where it now
resides. When an NFSv4.1 client first contacts that destination
server, it uses EXCHANGE_ID to detect trunking relationships.
The lease that was copied there is returned to that client, but the
destination server sets EXCHGID4_FLAG_CONFIRMED_R when replying to
the client. This is because the lease was confirmed on the source
server (before it was copied).
Normally, when CONFIRMED_R is set, a client purges the lease and
creates a new one. However, that throws away the entire benefit of
Transparent State Migration.
Therefore, the client must not purge that lease when it is possible
that Transparent State Migration has occurred.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If an NFS server returns a filehandle that we have previously
seen, and reports a different type, then nfs_refresh_inode()
will log a warning and return an error.
nfs_fhget() does not check for this error and may return an
inode with a different type than the one that the server
reported.
This is likely to cause confusion, and is one way that
->open_context() could return a directory inode as discussed
in the previous patch.
So if nfs_refresh_inode() returns and error, return that error
from nfs_fhget() to avoid the confusion propagating.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A confused server could return a filehandle for an
NFSv4 OPEN request, which it previously returned for a directory.
So the inode returned by ->open_context() in nfs_atomic_open()
could conceivably be a directory inode.
This has particular implications for the call to
nfs_file_set_open_context() in nfs_finish_open().
If that is called on a directory inode, then the nfs_open_context
that gets stored in the filp->private_data will be linked to
nfs_inode->open_files.
When the directory is closed, nfs_closedir() will (ultimately)
free the ->private_data, but not unlink it from nfs_inode->open_files
(because it doesn't expect an nfs_open_context there).
Subsequently the memory could get used for something else and eventually
if the ->open_files list is walked, the walker will fall off the end and
crash.
So: change nfs_finish_open() to only call nfs_file_set_open_context()
for regular-file inodes.
This failure mode has been seen in a production setting (unknown NFS
server implementation). The kernel was v3.0 and the specific sequence
seen would not affect more recent kernels, but I think a risk is still
present, and caution is wise.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit bafc9b754f ("vfs: More precise tests in d_invalidate")
in v3.18, a return of '0' from ->d_revalidate() will cause the dentry
to be invalidated even if it has filesystems mounted on or it or on a
descendant. The mounted filesystem is unmounted.
This means we need to be careful not to return 0 unless the directory
referred to truly is invalid. So -ESTALE or -ENOENT should invalidate
the directory. Other errors such a -EPERM or -ERESTARTSYS should be
returned from ->d_revalidate() so they are propagated to the caller.
A particular problem can be demonstrated by:
1/ mount an NFS filesystem using NFSv3 on /mnt
2/ mount any other filesystem on /mnt/foo
3/ ls /mnt/foo
4/ turn off network, or otherwise make the server unable to respond
5/ ls /mnt/foo &
6/ cat /proc/$!/stack # note that nfs_lookup_revalidate is in the call stack
7/ kill -9 $! # this results in -ERESTARTSYS being returned
8/ observe that /mnt/foo has been unmounted.
This patch changes nfs_lookup_revalidate() to only treat
-ESTALE from nfs_lookup_verify_inode() and
-ESTALE or -ENOENT from ->lookup()
as indicating an invalid inode. Other errors are returned.
Also nfs_check_inode_attributes() is changed to return -ESTALE rather
than -EIO. This is consistent with the error returned in similar
circumstances from nfs_update_inode().
As this bug allows any user to unmount a filesystem mounted on an NFS
filesystem, this fix is suitable for stable kernels.
Fixes: bafc9b754f ("vfs: More precise tests in d_invalidate")
Cc: stable@vger.kernel.org (v3.18+)
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Upon receiving a stateid error such as BAD_STATEID, the client
should retry the operation against the MDS before deciding to
do stateid recovery.
Previously, the code would initiate state recovery and it could
lead to a race in a state manager that could chose an incorrect
recovery method which would lead to the EIO failure for the
application.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit fabbbee0eb "PNFS fix fallback to MDS if got error on
commit to DS" moved the pnfs_set_lo_fail() to unhandled errors
which was not correct and lead to a kernel oops on umount.
Instead, fix the original EACCESS on commit to DS error by
getting the new layout and re-doing the IO.
Fixes: fabbbee0eb ("PNFS fix fallback to MDS if got error on commit to DS")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Static checkers have gotten clever enough to complain that "id_long" is
uninitialized on the failure path. It's harmless, but simple to fix.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
nfs_show_stats() was incorrectly reading statistics for bytes when printing that
for fsc. It caused files like /proc/self/mountstats to report incorrect fsc
statistics for NFS mounts.
Signed-off-by: Tuo Chen Peng <tpeng@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 8ef9b0b9e1 open-coded nfs_pgarray_set(), and left out the
initialization of the nfs_page_array's npages. This mistake didn't show up
until testing with block layouts, and there shows that all pNFS reads
return -EIO.
Fixes: 8ef9b0b9e1 ("NFS: move nfs_pgarray_set() to open code")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Now that the writes will schedule a commit on their own, we don't
need nfs_write_inode() to schedule one if there are outstanding
writes, and we're being called in non-blocking mode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the page cache is being flushed, then we want to ensure that we
do start a commit once the pages are done being flushed.
If we just wait until all I/O is done to that file, we can end up
livelocking until the balance_dirty_pages() mechanism puts its
foot down and forces I/O to stop.
So instead we do more or less the same thing that O_DIRECT does,
and set up a counter to tell us when the flush is done,
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Remove the 'layout_private' fields that were only used by the pNFS OSD
layout driver.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An interrupted rename will leave the old dentry behind if the rename
succeeds. Fix this by forcing a lookup the next time through
->d_revalidate.
A previous attempt at solving this problem took the approach to complete
the work of the rename asynchronously, however that approach was wrong
since it would allow the d_move() to occur after the directory's i_mutex
had been dropped by the original process.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFS uses some int, and unsigned int :1, and bool as flags in structs and
args. Assert the preference for uniformly replacing these with the bool
type.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The current code worked okay for getdents(), but getdents64() expects
the d_type field to get filled out properly in the stat structure.
Setting this field fixes xfstests generic/401.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead declare all functions with the proper methods signature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into nfsd tree
Update to get f0c3192cee "virtio_net: lower limit on buffer size".
That bug was interfering with my nfsd testing.
The current code works only for the case where we have exactly one slot,
which is no longer true.
nfs4_free_slot() will automatically declare the callback channel to be
drained when all slots have been returned.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This reverts commit 920b4530fb which could
call d_move() without holding the directory's i_mutex, and reverts commit
d4ea7e3c5c "NFS: Fix old dentry rehash after
move", which was a follow-up fix.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 920b4530fb ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind")
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the task calling layoutget is signalled, then it is possible for the
calls to nfs4_sequence_free_slot() and nfs4_layoutget_prepare() to race,
in which case we leak a slot.
The fix is to move the call to nfs4_sequence_free_slot() into the
nfs4_layoutget_release() so that it gets called at task teardown time.
Fixes: 2e80dbe7ac ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The wait_bit*() types and APIs are mixed into wait.h, but they
are a pretty orthogonal extension of wait-queues.
Furthermore, only about 50 kernel files use these APIs, while
over 1000 use the regular wait-queue functionality.
So clean up the main wait.h by moving the wait-bit functionality
out of it, into a separate .h and .c file:
include/linux/wait_bit.h for types and APIs
kernel/sched/wait_bit.c for the implementation
Update all header dependencies.
This reduces the size of wait.h rather significantly, by about 30%.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Rename:
wait_queue_t => wait_queue_entry_t
'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue",
but in reality it's a queue *entry*. The 'real' queue is the wait queue head,
which had to carry the name.
Start sorting this out by renaming it to 'wait_queue_entry_t'.
This also allows the real structure name 'struct __wait_queue' to
lose its double underscore and become 'struct wait_queue_entry',
which is the more canonical nomenclature for such data types.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZPdbLAAoJEHm+PkMAQRiGx4wH/1nCjfnl6fE8oJ24/1gEAOUh
biFdqJkYZmlLYHVtYfLm4Ueg4adJdg0wx6qM/4RaAzmQVvLfDV34bc1qBf1+P95G
kVF+osWyXrZo5cTwkwapHW/KNu4VJwAx2D1wrlxKDVG5AOrULH1pYOYGOpApEkZU
4N+q5+M0ce0GJpqtUZX+UnI33ygjdDbBxXoFKsr24B7eA0ouGbAJ7dC88WcaETL+
2/7tT01SvDMo0jBSV0WIqlgXwZ5gp3yPGnklC3F4159Yze6VFrzHMKS/UpPF8o8E
W9EbuzwxsKyXUifX2GY348L1f+47glen/1sedbuKnFhP6E9aqUQQJXvEO7ueQl4=
=m2Gx
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc5' into for-4.13/block
We've already got a few conflicts and upcoming work depends on some of the
changes that have gone into mainline as regression fixes for this series.
Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream
trees to continue working on 4.13 changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When an NFSv4 client performs a mount operation, it first mounts the
NFSv4 root and then does path walk to the exported path and performs a
submount on that, cloning the security mount options from the root's
superblock to the submount's superblock in the process.
Unless the NFS server has an explicit fsid=0 export with the
"security_label" option, the NFSv4 root superblock will not have
SBLABEL_MNT set, and neither will the submount superblock after cloning
the security mount options. As a result, setxattr's of security labels
over NFSv4.2 will fail. In a similar fashion, NFSv4.2 mounts mounted
with the context= mount option will not show the correct labels because
the nfs_server->caps flags of the cloned superblock will still have
NFS_CAP_SECURITY_LABEL set.
Allowing the NFSv4 client to enable or disable SECURITY_LSM_NATIVE_LABELS
behavior will ensure that the SBLABEL_MNT flag has the correct value
when the client traverses from an exported path without the
"security_label" option to one with the "security_label" option and
vice versa. Similarly, checking to see if SECURITY_LSM_NATIVE_LABELS is
set upon return from security_sb_clone_mnt_opts() and clearing
NFS_CAP_SECURITY_LABEL if necessary will allow the correct labels to
be displayed for NFSv4.2 mounts mounted with the context= mount option.
Resolves: https://github.com/SELinuxProject/selinux-kernel/issues/35
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we have umask support, we shouldn't re-send the mode in a SETATTR
following an exclusive CREATE, or we risk having the same problem fixed in
commit 5334c5bdac ("NFS: Send attributes in OPEN request for
NFS4_CREATE_EXCLUSIVE4_1"), which is that files with S_ISGID will have that
bit stripped away.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: dff25ddb48 ("nfs: add support for the umask attribute")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Bugfixes include:
- Fix a typo in commit e092693443 that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout segment.
-----BEGIN PGP SIGNATURE-----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=P2bm
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Bugfixes include:
- Fix a typo in commit e092693443 ("NFS append COMMIT after
synchronous COPY") that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout
segment"
* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Mark unnecessarily extern functions as static
SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
NFSv4.0: Fix a lock leak in nfs40_walk_client_list
pnfs: Fix the check for requests in range of layout segment
xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
NFS fix COMMIT after COPY
nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.
Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When the call to nfs_devname() fails, the error path attempts to retain
the error via the mnt variable, but this requires a cast across very
different types (char * to struct vfsmount *), which the upcoming
structure layout randomization plugin flags as being potentially
dangerous in the face of randomization. This is a false positive, but
what this code actually wants to do is retain the error value, so this
patch explicitly sets it, instead of using what seems to be an
unexpected cast.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
It's possible and acceptable for NFS to attempt to add requests beyond the
range of the current pgio->pg_lseg, a case which should be caught and
limited by the pg_test operation. However, the current handling of this
case replaces pgio->pg_lseg with a new layout segment (after a WARN) within
that pg_test operation. That will cause all the previously added requests
to be submitted with this new layout segment, which may not be valid for
those requests.
Fix this problem by only returning zero for the number of bytes to coalesce
from pg_test for this case which allows any previously added requests to
complete on the current layout segment. The check for requests starting
out of range of the layout segment moves to pg_init, so that the
replacement of pgio->pg_lseg will be done when the next request is added.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If xdr_inline_decode() fails then we end up returning ERR_PTR(0). The
caller treats NULL returns as -ENOMEM so it doesn't really hurt runtime,
but obviously we intended to set an error code here.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
struct svc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
pc_count is the only writeable memeber of struct svc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct svc_procinfo, and into a
separate writable array that is pointed to by struct svc_version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the resp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Drop the argp argument as it can trivially be derived from the rqstp
argument. With that all functions now have the same prototype, and we
can remove the unsafe casting to kxdrproc_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Drop the argp and resp arguments as they can trivially be derived from
the rqstp argument. With that all functions now have the same prototype,
and we can remove the unsafe casting to svc_procfunc as well as the
svc_procfunc typedef itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
struct rpc_procinfo contains function pointers, and marking it as
constant avoids it being able to be used as an attach vector for
code injections.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
p_count is the only writeable memeber of struct rpc_procinfo, which is
a good candidate to be const-ified as it contains function pointers.
This patch moves it into out out struct rpc_procinfo, and into a
separate writable array that is pointed to by struct rpc_version and
indexed by p_statidx.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Instead declare all functions with the proper methods signature.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
bugfixes.
-----BEGIN PGP SIGNATURE-----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=Rtl/
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Another RDMA update from Chuck Lever, and a bunch of miscellaneous
bugfixes"
* tag 'nfsd-4.12' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd: Fix up the "supattr_exclcreat" attributes
nfsd: encoders mustn't use unitialized values in error cases
nfsd: fix undefined behavior in nfsd4_layout_verify
lockd: fix lockd shutdown race
NFSv4: Fix callback server shutdown
SUNRPC: Refactor svc_set_num_threads()
NFSv4.x/callback: Create the callback service through svc_create_pooled
lockd: remove redundant check on block
svcrdma: Clean out old XDR encoders
svcrdma: Remove the req_map cache
svcrdma: Remove unused RDMA Write completion handler
svcrdma: Reduce size of sge array in struct svc_rdma_op_ctxt
svcrdma: Clean up RPC-over-RDMA backchannel reply processing
svcrdma: Report Write/Reply chunk overruns
svcrdma: Clean up RDMA_ERROR path
svcrdma: Use rdma_rw API in RPC reply path
svcrdma: Introduce local rdma_rw API helpers
svcrdma: Clean up svc_rdma_get_inv_rkey()
svcrdma: Add helper to save pages under I/O
svcrdma: Eliminate RPCRDMA_SQ_DEPTH_MULT
...
Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that
GFP_NOFS is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes
-----BEGIN PGP SIGNATURE-----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=7Nm2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix use after free in write error path
- Use GFP_NOIO for two allocations in writeback
- Fix a hang in OPEN related to server reboot
- Check the result of nfs4_pnfs_ds_connect
- Fix an rcu lock leak
Features:
- Removal of the unmaintained and unused OSD pNFS layout
- Cleanup and removal of lots of unnecessary dprintk()s
- Cleanup and removal of some memory failure paths now that GFP_NOFS
is guaranteed to never fail.
- Remove the v3-only data server limitation on pNFS/flexfiles
Bugfixes:
- RPC/RDMA connection handling bugfixes
- Copy offload: fixes to ensure the copied data is COMMITed to disk.
- Readdir: switch back to using the ->iterate VFS interface
- File locking fixes from Ben Coddington
- Various use-after-free and deadlock issues in pNFS
- Write path bugfixes"
* tag 'nfs-for-4.12-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (89 commits)
pNFS/flexfiles: Always attempt to call layoutstats when flexfiles is enabled
NFSv4.1: Work around a Linux server bug...
NFS append COMMIT after synchronous COPY
NFSv4: Fix exclusive create attributes encoding
NFSv4: Fix an rcu lock leak
nfs: use kmap/kunmap directly
NFS: always treat the invocation of nfs_getattr as cache hit when noac is on
Fix nfs_client refcounting if kmalloc fails in nfs4_proc_exchange_id and nfs4_proc_async_renew
NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION
pNFS: Fix NULL dereference in pnfs_generic_alloc_ds_commits
pNFS: Fix a typo in pnfs_generic_alloc_ds_commits
pNFS: Fix a deadlock when coalescing writes and returning the layout
pNFS: Don't clear the layout return info if there are segments to return
pNFS: Ensure we commit the layout if it has been invalidated
pNFS: Don't send COMMITs to the DSes if the server invalidated our layout
pNFS/flexfiles: Fix up the ff_layout_write_pagelist failure path
pNFS: Ensure we check layout validity before marking it for return
NFS4.1 handle interrupted slot reuse from ERR_DELAY
NFSv4: check return value of xdr_inline_decode
nfs/filelayout: fix NULL pointer dereference in fl_pnfs_update_layout()
...
Layoutstats is always desirable when using the flexfiles driver, so
we should enable it if that driver is being loaded. It is safe to do
so, because even when the mount specifies NFSv4.1, we will turn it
off if the server tells us it is unsupported.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It turns out the Linux server has a bug in its implementation of
supattr_exclcreat; it returns the set of all attributes, whether
or not they are supported by minor version 1.
In order to avoid a regression, we therefore apply the supported_attrs
as a mask on top of whatever the server sent us.
Reported-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of messing with the commit path which has been causing issues,
add a COMMIT op after the COPY and ask for stable copies in the first
space.
It saves a round trip, since after the COPY, the client sends a COMMIT
anyway.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When using NFS4_CREATE_EXCLUSIVE4_1 mode, the client will overestimate the
amount of space that it needs for the attributes because it does so
before checking whether or not the server supports a given attribute.
Fix by checking the attribute mask earlier.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The intention in the original patch was to release the lock when
we put the inode, however something got screwed up.
Reported-by: Jason Yan <yanaijie@huawei.com>
Fixes: 7b410d9ce4 ("pNFS: Delay getting the layout header in..")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch removes useless nfs_readdir_get_array() and
nfs_readdir_release_array() as suggested by Trond Myklebust
nfs_readdir() calls nfs_revalidate_mapping() before
readdir_search_pagecache() , nfs_do_filldir(), uncached_readdir()
so mapping should be correct.
While kmap() can't fail, all subsequent error checks were removed
as well as unused labels.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When using 'ls -l' to display a large directory, if noac option is used,
in function nfs_getattr() nfs_need_revalidate_inode() will always be true
for NFSv3 and the nfs_entry cache of the directory will be flushed. The
flush will lead to a fully reread of the directory entries from server.
To prevent the unnecessary RPCs, we need to check whether or not the
noac option is used, and always report the invocation of nfs_getattr()
as cache hit instead cache miss when it's on.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If memory allocation fails for the callback data, we need to put the nfs_client
or we end up with an elevated refcount.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the server returns NFS4ERR_CONN_NOT_BOUND_TO_SESSION because we
are trunking, then RECLAIM_COMPLETE must handle that by calling
nfs4_schedule_session_recovery() and then retrying.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
In commit 0d3b12584972 "nfs: Convert to separately allocated bdi" I have
wrongly cloned bdi reference in nfs_clone_super(). Further inspection
has shown that originally the code was actually allocating a new bdi (in
->clone_server callback) which was later registered in
nfs_fs_mount_common() and used for sb->s_bdi in nfs_initialise_sb().
This could later result in bdi for the original superblock not getting
unregistered when that superblock got shutdown (as the cloned sb still
held bdi reference) and later when a new superblock was created under
the same anonymous device number, a clash in sysfs has happened on bdi
registration:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 10284 at /linux-next/fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x74
sysfs: cannot create duplicate filename '/devices/virtual/bdi/0:32'
Modules linked in: axp20x_usb_power gpio_axp209 nvmem_sunxi_sid sun4i_dma sun4i_ss virt_dma
CPU: 1 PID: 10284 Comm: mount.nfs Not tainted 4.11.0-rc4+ #14
Hardware name: Allwinner sun7i (A20) Family
[<c010f19c>] (unwind_backtrace) from [<c010bc74>] (show_stack+0x10/0x14)
[<c010bc74>] (show_stack) from [<c03c6e24>] (dump_stack+0x78/0x8c)
[<c03c6e24>] (dump_stack) from [<c0122200>] (__warn+0xe8/0x100)
[<c0122200>] (__warn) from [<c0122250>] (warn_slowpath_fmt+0x38/0x48)
[<c0122250>] (warn_slowpath_fmt) from [<c02ac178>] (sysfs_warn_dup+0x64/0x74)
[<c02ac178>] (sysfs_warn_dup) from [<c02ac254>] (sysfs_create_dir_ns+0x84/0x94)
[<c02ac254>] (sysfs_create_dir_ns) from [<c03c8b8c>] (kobject_add_internal+0x9c/0x2ec)
[<c03c8b8c>] (kobject_add_internal) from [<c03c8e24>] (kobject_add+0x48/0x98)
[<c03c8e24>] (kobject_add) from [<c048d75c>] (device_add+0xe4/0x5a0)
[<c048d75c>] (device_add) from [<c048ddb4>] (device_create_groups_vargs+0xac/0xbc)
[<c048ddb4>] (device_create_groups_vargs) from [<c048dde4>] (device_create_vargs+0x20/0x28)
[<c048dde4>] (device_create_vargs) from [<c02075c8>] (bdi_register_va+0x44/0xfc)
[<c02075c8>] (bdi_register_va) from [<c023d378>] (super_setup_bdi_name+0x48/0xa4)
[<c023d378>] (super_setup_bdi_name) from [<c0312ef4>] (nfs_fill_super+0x1a4/0x204)
[<c0312ef4>] (nfs_fill_super) from [<c03133f0>] (nfs_fs_mount_common+0x140/0x1e8)
[<c03133f0>] (nfs_fs_mount_common) from [<c03335cc>] (nfs4_remote_mount+0x50/0x58)
[<c03335cc>] (nfs4_remote_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
[<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
[<c025cba0>] (vfs_kern_mount) from [<c033352c>] (nfs_do_root_mount+0x80/0xa0)
[<c033352c>] (nfs_do_root_mount) from [<c0333818>] (nfs4_try_mount+0x28/0x3c)
[<c0333818>] (nfs4_try_mount) from [<c0313874>] (nfs_fs_mount+0x2cc/0x8c4)
[<c0313874>] (nfs_fs_mount) from [<c023ef98>] (mount_fs+0x14/0xa4)
[<c023ef98>] (mount_fs) from [<c025cba0>] (vfs_kern_mount+0x54/0x128)
[<c025cba0>] (vfs_kern_mount) from [<c02600f0>] (do_mount+0x158/0xc7c)
[<c02600f0>] (do_mount) from [<c0260f98>] (SyS_mount+0x8c/0xb4)
[<c0260f98>] (SyS_mount) from [<c0107840>] (ret_fast_syscall+0x0/0x3c)
Fix the problem by always creating new bdi for a superblock as we used
to do.
Reported-and-tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: 0d3b12584972ce5781179ad3f15cca3cdb5cae05
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Consider the following deadlock:
Process P1 Process P2 Process P3
========== ========== ==========
lock_page(page)
lseg = pnfs_update_layout(inode)
lo = NFS_I(inode)->layout
pnfs_error_mark_layout_for_return(lo)
lock_page(page)
lseg = pnfs_update_layout(inode)
In this scenario,
- P1 has declared the layout to be in error, but P2 holds a reference to
a layout segment on that inode, so the layoutreturn is deferred.
- P2 is waiting for a page lock held by P3.
- P3 is asking for a new layout segment, but is blocked waiting
for the layoutreturn.
The fix is to ensure that pnfs_error_mark_layout_for_return() does
not set the NFS_LAYOUT_RETURN flag, which blocks P3. Instead, we allow
the latter to call LAYOUTGET so that it can make progress and unblock
P2.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In pnfs_clear_layoutreturn_info, ensure that we don't clear the layout
return info if there are new segments queued for return due to, for
instance, a race between a LAYOUTRETURN and a failed I/O attempt.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
If the layout is being invalidated on the server, then we must
invoke nfs_commit_inode() to ensure any commits to the DS get
cleared out.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the layout was invalidated, then assume we should requeue all the
pending writes for the DS in question.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the attempt to write through pNFS fails, we need to use the same
failure semantics as for the read path: If the FF_FLAGS_NO_IO_THRU_MDS
flag is set or we have sufficient valid DSes, then we must retry through
pNFS
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
pnfs_error_mark_layout_for_return needs to check that the layout is
valid before calling pnfs_set_plh_return_info().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the RPC slot was interrupted and server replied to the next
operation on the "reused" slot with ERR_DELAY, don't clear out
the "interrupted" flag until we properly recover.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Function xdr_inline_decode() will return a NULL pointer if the input
buffer does not have long enough buffer to decode nbytes of data.
However, in function decode_op_map(), the return value of
xdr_inline_decode() is not validated before it is used. This patch adds
a check to the return value of xdr_inline_decode().
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We want to use kthread_stop() in order to ensure the threads are
shut down before we tear down the nfs_callback_info in nfs_callback_down.
Tested-and-reviewed-by: Kinglong Mee <kinglongmee@gmail.com>
Reported-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: bb6aeba736 ("NFSv4.x: Switch to using svc_set_num_threads()...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client receives a fatal server error from nfs_pageio_add_request(),
then we should always truncate the page on which the error occurred.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
EACCES, EDQUOT, EFBIG and ESTALE are all fatal errors as far as NFS
I/O is concerned. They need to be reported back to the application.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the server has already returned a fatal write error that the user
has not yet received on this file, then don't write back the other pages.
Instead, act as if they have been sent, and have returned with the same
error.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The assumption should be that if the caller returns PNFS_ATTEMPTED, then hdr
has been consumed, and so we should not be testing hdr->task.tk_status.
If the caller returns PNFS_TRY_AGAIN, then we need to recoalesce and
free hdr.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we have a layout segment cached in pgio->pg_lseg, we should check it
for validity before reusing it in a new RPC request. Otherwise, if we
recoalesce, we can end up looping forever.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS attempts to wait for read and write completion before unlocking in
order to ensure that the data returned was protected by the lock. When
this waiting is interrupted by a signal, the unlock may be skipped, and
messages similar to the following are seen in the kernel ring buffer:
[20.167876] Leaked locks on dev=0x0:0x2b ino=0x8dd4c3:
[20.168286] POSIX: fl_owner=ffff880078b06940 fl_flags=0x1 fl_type=0x0 fl_pid=20183
[20.168727] POSIX: fl_owner=ffff880078b06680 fl_flags=0x1 fl_type=0x0 fl_pid=20185
For NFSv3, the missing unlock will cause the server to refuse conflicting
locks indefinitely. For NFSv4, the leftover lock will be removed by the
server after the lease timeout.
This patch fixes this issue by skipping the usual wait in
nfs_iocounter_wait if the FL_CLOSE flag is set when signaled. Instead, the
wait happens in the unlock RPC task on the NFS UOC rpc_waitqueue.
For NFSv3, use lockd's new nlmclnt_operations along with
nfs_async_iocounter_wait to defer NLM's unlock task until the lock
context's iocounter reaches zero.
For NFSv4, call nfs_async_iocounter_wait() directly from unlock's
current rpc_call_prepare.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS would enjoy the ability to modify the behavior of the NLM client's
unlock RPC task in order to delay the transmission of the unlock until IO
that was submitted under that lock has completed. This ability can ensure
that the NLM client will always complete the transmission of an unlock even
if the waiting caller has been interrupted with fatal signal.
For this purpose, a pointer to a struct nlmclnt_operations can be assigned
in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on
the nlm_host. The struct nlmclnt_operations defines three callback
operations that will be used in a following patch:
nlmclnt_alloc_call - used to call back after a successful allocation of
a struct nlm_rqst in nlmclnt_proc().
nlmclnt_unlock_prepare - used to call back during NLM unlock's
rpc_call_prepare. The NLM client defers calling rpc_call_start()
until this callback returns false.
nlmclnt_release_call - used to call back when the NLM client's struct
nlm_rqst is freed.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
By sleeping on a new NFS Unlock-On-Close waitqueue, rpc tasks may wait for
a lock context's iocounter to reach zero. The rpc waitqueue is only woken
when the open_context has the NFS_CONTEXT_UNLOCK flag set in order to
mitigate spurious wake-ups for any iocounter reaching zero.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We only need to check lock exclusive/shared types against open mode when
flock() is used on NFS, so move it into the flock-specific path instead of
checking it for all locks.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
flock64_to_posix_lock() is already doing this check
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The objlayout code has been in the tree, but it's been unmaintained and
no server product for it actually ever shipped.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The check in nfs4_ff_layout_prepare_ds() seems to be missing.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: a33e4b036d ("pNFS: return status from nfs4_pnfs_ds_connect")
Cc: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # v4.11
If the server fails to return the attributes as part of an OPEN
reply, and then reboots, we can end up hanging. The reason is that
the client attempts to send a GETATTR in order to pick up the
missing OPEN call, but fails to release the slot first, causing
reboot recovery to deadlock.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 2e80dbe7ac ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...")
Cc: stable@vger.kernel.org # v4.8+
Now that all bdi structures filesystems use are properly refcounted, we
can remove the SB_I_DYNBDI flag.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.
CC: Anna Schumaker <anna.schumaker@netapp.com>
CC: linux-nfs@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Let's try to have it in a cacheline in nfs4_proc_pgio_rpc_prepare().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Since commit 00bfa30abe ("NFS: Create a common pgio_alloc and
pgio_release function"), nfs_pgarray_set() has only a single caller. Let's
open code it.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Prevent a deadlock that can occur if we wait on allocations
that try to write back our pages.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 00bfa30abe ("NFS: Create a common pgio_alloc and pgio_release...")
Cc: stable@vger.kernel.org # 3.16+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit a7d42ddb30 ("nfs: add mirroring
support to pgio layer") moved pg_cleanup out of the path when there was
non-sequental I/O that needed to be flushed. The result is that for
layouts that have more than one layout segment per file, the pg_lseg is not
cleared, so we can end up hitting the WARN_ON_ONCE(req_start >= seg_end) in
pnfs_generic_pg_test since the pg_lseg will be pointing to that
previously-flushed layout segment.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: a7d42ddb30 ("nfs: add mirroring support to pgio layer")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When passed GFP flags that allow sleeping (such as
GFP_NOIO), mempool_alloc() will never return NULL, it will
wait until memory is available.
This means that we don't need to handle failure, but that we
do need to ensure one thread doesn't call mempool_alloc()
twice on the one pool without queuing or freeing the first
allocation. If multiple threads did this during times of
high memory pressure, the pool could be exhausted and a
deadlock could result.
pnfs_generic_alloc_ds_commits() attempts to allocate from
the nfs_commit_mempool while already holding an allocation
from that pool. This is not safe. So change
nfs_commitdata_alloc() to take a flag that indicates whether
failure is acceptable.
In pnfs_generic_alloc_ds_commits(), accept failure and
handle it as we currently do. Else where, do not accept
failure, and do not handle it.
Even when failure is acceptable, we want to succeed if
possible. That means both
- using an entry from the pool if there is one
- waiting for direct reclaim is there isn't.
We call mempool_alloc(GFP_NOWAIT) to achieve the first, then
kmem_cache_alloc(GFP_NOIO|__GFP_NORETRY) to achieve the
second. Each of these can fail, but together they do the
best they can without blocking indefinitely.
The objects returned by kmem_cache_alloc() will still be freed
by mempool_free(). This is safe as mempool_alloc() uses
exactly the same function to allocate objects (since the mempool
was created with mempool_create_slab_pool()). The object returned
by mempool_alloc() and kmem_cache_alloc() are indistinguishable
so mempool_free() will handle both identically, either adding to the
pool or calling kmem_cache_free().
Also, don't test for failure when allocating from
nfs_wdata_mempool.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Returning errors directly even lets us remove the goto
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we cut out the dprintk()s, then we can return error codes directly
and cut out the goto.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This puts all the common code in a single place for the
walk_client_list() functions.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Once again, we can remove the function and compare integer values
directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If we cut out the dprintk()s, then we don't even need this to be a
separate function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Just remove the function and have the caller use nfs_release_request()
instead.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We always call nfs_mark_client_ready() even if nfs_create_rpc_client()
returns an error, so we can rearrange nfs_init_client() to mark the
client ready from a single place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Let's cut out the goto and return any errors immedately
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Additionally, this change lets us cut out the goto by returning errors
immediately.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk() lets us simplify the function by returning status
codes directly, rather than using a goto.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk() lets us return the status value directly, rather
than jumping to a label if an error occurs.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In addition to removing the dprintk(), this patch also initializes "res"
to the default return value instead of doing this through an else
condition.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk()s lets us simplify the function by removing the
else condition entirely and returning the status of
initiate_{file,bulk}_draining() directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Flexfilelayout supports data servers which talk NFS v3 and v4.{0,1,2}.
However, this code path is disabled and v3 only servers are accepted.
This change removes this limitation.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS has some optimizations for readdir to choose between using READDIR or
READDIRPLUS based on workload, and which NFS operation to use is determined
by subsequent interactions with lookup, d_revalidate, and getattr.
Concurrent use of nfs_readdir() via ->iterate_shared() can cause those
optimizations to repeatedly invalidate the pagecache used to store
directory entries during readdir(), which causes some very bad performance
for directories with many entries (more than about 10000).
There's a couple ways to fix this in NFS, but no fix would be as simple as
going back to ->iterate() to serialize nfs_readdir(), and neither fix I
tested performed as well as going back to ->iterate().
The first required taking the directory's i_lock for each entry, with the
result of terrible contention.
The second way adds another flag to the nfs_inode, and so keeps the
optimizations working for large directories. The difference from using
->iterate() here is that much more memory is consumed for a given workload
without any performance gain.
The workings of nfs_readdir() are such that concurrent users are serialized
within read_cache_page() waiting to retrieve pages of entries from the
server. By serializing this work in iterate_dir() instead, contention for
cache pages is reduced. Waiting processes can have an uncontended pass at
the entirety of the directory's pagecache once previous processes have
completed filling it.
v2 - Keep the bits needed for parallel lookup
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It leaves the iterator advanced by the amount of IO it has requested
instead of the amount actually transferred. Among other things,
that confuses the hell out of generic_file_splice_read().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable Bugfixes:
- Fix infinite loop on BAD_STATEID error
Other Bugfixes:
- Fix old dentry rehash after move
- Fix pnfs GETDEVINFO hangs
- Fix pnfs fallback to MDS on commit errors
- Fix flexfiles kernel oops
-----BEGIN PGP SIGNATURE-----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=1Xgv
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Here are a few more bugfixes that came in over the last couple of
weeks. Most of these fix various hangs and loops that people found,
but we also had a few error handling fixes.
Stable Bugfixes:
- fix infinite loop on BAD_STATEID error
Other Bugfixes:
- fix old dentry rehash after move
- fix pnfs GETDEVINFO hangs
- fix pnfs fallback to MDS on commit errors
- fix flexfiles kernel oops"
* tag 'nfs-for-4.11-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type
NFSv4.1 fix infinite loop on IO BAD_STATEID error
PNFS fix fallback to MDS if got error on commit to DS
NFS filelayout:call GETDEVICEINFO after pnfs_layout_process completes
NFS store nfs4_deviceid in struct nfs4_filelayout_segment
NFS cleanup struct nfs4_filelayout_segment
NFS: Fix old dentry rehash after move
Commit 63d63cbf5e "NFSv4.1: Don't recheck delegations that
have already been checked" introduced a regression where when a
client received BAD_STATEID error it would not send any TEST_STATEID
and instead go into an infinite loop of resending the IO that caused
the BAD_STATEID.
Fixes: 63d63cbf5e ("NFSv4.1: Don't recheck delegations that have already been checked")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # 4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Upong receiving some errors (EACCES) on commit to the DS the code
doesn't fallback to MDS and intead retrieds to the same DS again.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix a filelayout GETDEVICEINFO call hang triggered from the LAYOUTGET
pnfs_layout_process where the GETDEVICEINFO call is waiting for a
session slot, and the LAYOUGET call is waiting for pnfs_layout_process
to complete before freeing the slot GETDEVICEINFO is waiting for..
This occurs in testing against the pynfs pNFS server where the
the on-wire reply highest_slotid and slot id are zero, and the
target high slot id is 8 (negotiated in CREATE_SESSION).
The internal fore channel slot table max_slotid, the maximum allowed
table slotid value, has been reduced via nfs41_set_max_slotid_locked
from 8 to 1. Thus there is one slot (slotid 0) available for use but
it has not been freed by LAYOUTGET proir to the GETDEVICEINFO request.
In order to ensure that layoutrecall callbacks are processed in the
correct order, nfs4_proc_layoutget processing needs to be finished
e.g. pnfs_layout_process) before giving up the slot that identifies
the layoutget (see referring_call_exists).
Move the filelayout_check_layout nfs4_find_get_device call outside of
the pnfs_layout_process call tree.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In preparation for moving the filelayout getdeviceinfo call from
filelayout_alloc_lseg called by pnfs_process_layout
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever