Commit Graph

1641 Commits

Author SHA1 Message Date
Wen Congyang e90bdb7f52 memory-hotplug: update memory block's state and notify userspace
remove_memory() will be called when hot removing a memory device.  But
even if offlining memory, we cannot notice it.  So the patch updates the
memory block's state and sends notification to userspace.

Additionally, the memory device may contain more than one memory block.
If the memory block has been offlined, __offline_pages() will fail.  So we
should try to offline one memory block at a time.

Thus remove_memory() also check each memory block's state.  So there is no
need to check the memory block's state before calling remove_memory().

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:23:02 +09:00
Wen Congyang a16cee10c7 memory-hotplug: preparation to notify memory block's state at memory hot remove
remove_memory() is called in two cases:
1. echo offline >/sys/devices/system/memory/memoryXX/state
2. hot remove a memory device

In the 1st case, the memory block's state is changed and the notification
that memory block's state changed is sent to userland after calling
remove_memory().  So user can notice memory block is changed.

But in the 2nd case, the memory block's state is not changed and the
notification is not also sent to userspcae even if calling
remove_memory().  So user cannot notice memory block is changed.

For adding the notification at memory hot remove, the patch just prepare
as follows:
1st case uses offline_pages() for offlining memory.
2nd case uses remove_memory() for offlining memory and changing memory block's
    state and notifing the information.

The patch does not implement notification to remove_memory().

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-09 16:23:02 +09:00
Linus Torvalds ce57e981f2 firmware: use 'kernel_read()' to read firmware into kernel buffer
Fengguang correctly points out that the firmware reading should not use
vfs_read(), since the buffer is in kernel space.

The vfs_read() just happened to work for kernel threads, but sparse
warns about the incorrect address spaces, and it's definitely incorrect
and could fail for other users of the firmware loading.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04 09:19:02 -07:00
Linus Torvalds abb139e75c firmware: teach the kernel to load firmware files directly from the filesystem
This is a first step in allowing people to by-pass udev for loading
device firmware.  Current versions of udev will deadlock (causing us to
block for the 30 second timeout) under some circumstances if the
firmware is loaded as part of the module initialization path, and this
is causing problems for media drivers in particular.

The current patch hardcodes the firmware path that udev uses by default,
and will fall back to the legacy udev mode if the firmware cannot be
found there.  We'd like to add support for both configuring the paths
and the fallback behaviour, but in the meantime this hopefully fixes the
immediate problem, while also giving us a way forward.

[ v2: Some VFS layer interface cleanups suggested by Al Viro ]
[ v3: use the default udev paths suggested by Kay Sievers ]

Suggested-by: Ivan Kalvachev <ikalvachev@gmail.com>
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Kay Sievers <kay@redhat.com>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-03 15:58:32 -07:00
Linus Torvalds aab174f0df Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs update from Al Viro:

 - big one - consolidation of descriptor-related logics; almost all of
   that is moved to fs/file.c

   (BTW, I'm seriously tempted to rename the result to fd.c.  As it is,
   we have a situation when file_table.c is about handling of struct
   file and file.c is about handling of descriptor tables; the reasons
   are historical - file_table.c used to be about a static array of
   struct file we used to have way back).

   A lot of stray ends got cleaned up and converted to saner primitives,
   disgusting mess in android/binder.c is still disgusting, but at least
   doesn't poke so much in descriptor table guts anymore.  A bunch of
   relatively minor races got fixed in process, plus an ext4 struct file
   leak.

 - related thing - fget_light() partially unuglified; see fdget() in
   there (and yes, it generates the code as good as we used to have).

 - also related - bits of Cyrill's procfs stuff that got entangled into
   that work; _not_ all of it, just the initial move to fs/proc/fd.c and
   switch of fdinfo to seq_file.

 - Alex's fs/coredump.c spiltoff - the same story, had been easier to
   take that commit than mess with conflicts.  The rest is a separate
   pile, this was just a mechanical code movement.

 - a few misc patches all over the place.  Not all for this cycle,
   there'll be more (and quite a few currently sit in akpm's tree)."

Fix up trivial conflicts in the android binder driver, and some fairly
simple conflicts due to two different changes to the sock_alloc_file()
interface ("take descriptor handling from sock_alloc_file() to callers"
vs "net: Providing protocol type via system.sockprotoname xattr of
/proc/PID/fd entries" adding a dentry name to the socket)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (72 commits)
  MAX_LFS_FILESIZE should be a loff_t
  compat: fs: Generic compat_sys_sendfile implementation
  fs: push rcu_barrier() from deactivate_locked_super() to filesystems
  btrfs: reada_extent doesn't need kref for refcount
  coredump: move core dump functionality into its own file
  coredump: prevent double-free on an error path in core dumper
  usb/gadget: fix misannotations
  fcntl: fix misannotations
  ceph: don't abuse d_delete() on failure exits
  hypfs: ->d_parent is never NULL or negative
  vfs: delete surplus inode NULL check
  switch simple cases of fget_light to fdget
  new helpers: fdget()/fdput()
  switch o2hb_region_dev_write() to fget_light()
  proc_map_files_readdir(): don't bother with grabbing files
  make get_file() return its argument
  vhost_set_vring(): turn pollstart/pollstop into bool
  switch prctl_set_mm_exe_file() to fget_light()
  switch xfs_find_handle() to fget_light()
  switch xfs_swapext() to fget_light()
  ...
2012-10-02 20:25:04 -07:00
Linus Torvalds ca41cc96b2 Merge branch 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull CMA and DMA-mapping updates from Marek Szyprowski:
 "This time the pull request is rather small, because the further
  redesign patches were not ready on time.

  This pull request consists of the patches which extend ARM DMA-mapping
  subsystem with support for CPU coherent (ACP) DMA busses.  The first
  client of the new version is HighBank SATA driver.  The second part of
  the pull request includes various cleanup for both CMA common code and
  ARM DMA-mapping subsystem."

Fix up trivial add-add conflict due to the "dma-coherent" DT property
being added next to the "calxeda,port-phys" property for the Calxeda
AHCI controller.

* 'for-v3.7' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Remove unsed var at arm_coherent_iommu_unmap_page
  ARM: highbank: add coherent DMA setup
  ARM: kill off arch_is_coherent
  ARM: add coherent iommu dma ops
  ARM: add coherent dma ops
  ARM: dma-mapping: Refrain noisy console message
  ARM: dma-mapping: Small logical clean up
  drivers: dma-contiguous: refactor dma_alloc_from_contiguous()
2012-10-02 19:13:12 -07:00
Linus Torvalds 16642a2e7b Power management updates for 3.7-rc1
* Improved system suspend/resume and runtime PM handling for the SH TMU, CMT
   and MTU2 clock event devices (also used by ARM/shmobile).
 
 * Generic PM domains framework extensions related to cpuidle support and
   domain objects lookup using names.
 
 * ARM/shmobile power management updates including improved support for the
   SH7372's A4S power domain containing the CPU core.
 
 * cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre
   Przywara and Borislav Petkov.
 
 * cpu0 cpufreq driver from Shawn Guo.
 
 * cpufreq governor fixes related to the relaxing of limit from Michal Pecio.
 
 * OMAP cpufreq updates from Axel Lin and Richard Zhao.
 
 * cpuidle ladder governor fixes related to the disabling of states from
   Carsten Emde and me.
 
 * Runtime PM core updates related to the interactions with the system suspend
   core from Alan Stern and Kevin Hilman.
 
 * Wakeup sources modification allowing more helper functions to be called from
   interrupt context from John Stultz and additional diagnostic code from Todd
   Poynor.
 
 * System suspend error code path fix from Feng Hong.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJQa1rRAAoJEKhOf7ml8uNsYZ0P/2RZ71sgLWcUCfr0yHaiZeOd
 2GxEYSZ+9BZJHADgoAK/bHRTv8crm40Y2RkbaWbxPDRNuE4SutbvNTGTlJSAguSD
 yHkU/6AFC7u8Jwq+afsWIdGX7eHd78zPpj6EVtVtjHM903WDwbMU2vUz7tQ+fFa+
 ZZ7eydq9j0ec0OoH3UeNhet7JSOpT5BSLgjmIkHMBgIvTxNVDbkB31QUxnUxocxn
 k6S2wQaUSJJWGMLksRRNrhwLq+cGYwTsaOtG/KzRLH1raUyn33B5pcZr0aqhOkjg
 ClaCks3V8o3vRghSwOPB5aVXzjBKvM3UnSyJNIl+FeCeyWuwSNbkEFdA/e7oPuxG
 UsW6dcHiuVo6Ir4+zhd9+lN+/AcPTChO5b7lbU8qRF4ce04czWlUY/KzJjaM+YOE
 CKGq6eX9AHwFjE+h4+VcCXgmzcioiS8Y/CPz13u8N1y0zzwW+ftjb12K+7lVBEG1
 fhrePKHgLw3kJ9LqGpR+4vVur7C+rCf6WwCReTY2vXXVYJ+SuKWTRI4zAjTPXtHa
 i9dpMRASpF+ScRYBcgwIpv789WuHATFKqdBSinZUKBaxQZ5flJ2qIrfqN5VeAejh
 oQs/zZCdIuAtFKqVycQ0L42YxFNKgPFKQErUCSu3M5OuZLlLVLu7yQvIo2Xmo9qf
 Hcrpvo5K+w29YkiwGP9e
 =rbCk
 -----END PGP SIGNATURE-----

Merge tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael J Wysocki:

 - Improved system suspend/resume and runtime PM handling for the SH
   TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile).

 - Generic PM domains framework extensions related to cpuidle support
   and domain objects lookup using names.

 - ARM/shmobile power management updates including improved support for
   the SH7372's A4S power domain containing the CPU core.

 - cpufreq changes related to AMD CPUs support from Matthew Garrett,
   Andre Przywara and Borislav Petkov.

 - cpu0 cpufreq driver from Shawn Guo.

 - cpufreq governor fixes related to the relaxing of limit from Michal
   Pecio.

 - OMAP cpufreq updates from Axel Lin and Richard Zhao.

 - cpuidle ladder governor fixes related to the disabling of states from
   Carsten Emde and me.

 - Runtime PM core updates related to the interactions with the system
   suspend core from Alan Stern and Kevin Hilman.

 - Wakeup sources modification allowing more helper functions to be
   called from interrupt context from John Stultz and additional
   diagnostic code from Todd Poynor.

 - System suspend error code path fix from Feng Hong.

Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the
workqueue fixes conflicting fairly badly with the removal of support for
hardware P-state chips.  The changes were independent but somewhat
intertwined.

* tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code"
  PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2
  cpuidle: rename function name "__cpuidle_register_driver", v2
  cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name
  cpuidle: remove some empty lines
  PM: Prevent runtime suspend during system resume
  PM QoS: Use spinlock in the per-device PM QoS constraints code
  PM / Sleep: use resume event when call dpm_resume_early
  cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure
  ACPI / processor: remove pointless variable initialization
  ACPI / processor: remove unused function parameter
  cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
  sections: fix section conflicts in drivers/cpufreq
  cpufreq: conservative: update frequency when limits are relaxed
  cpufreq / ondemand: update frequency when limits are relaxed
  properly __init-annotate pm_sysrq_init()
  cpufreq: Add a generic cpufreq-cpu0 driver
  PM / OPP: Initialize OPP table from device tree
  ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
  cpufreq: Remove support for hardware P-state chips from powernow-k8
  ...
2012-10-02 18:32:35 -07:00
Linus Torvalds 437589a74b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace changes from Eric Biederman:
 "This is a mostly modest set of changes to enable basic user namespace
  support.  This allows the code to code to compile with user namespaces
  enabled and removes the assumption there is only the initial user
  namespace.  Everything is converted except for the most complex of the
  filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs,
  nfs, ocfs2 and xfs as those patches need a bit more review.

  The strategy is to push kuid_t and kgid_t values are far down into
  subsystems and filesystems as reasonable.  Leaving the make_kuid and
  from_kuid operations to happen at the edge of userspace, as the values
  come off the disk, and as the values come in from the network.
  Letting compile type incompatible compile errors (present when user
  namespaces are enabled) guide me to find the issues.

  The most tricky areas have been the places where we had an implicit
  union of uid and gid values and were storing them in an unsigned int.
  Those places were converted into explicit unions.  I made certain to
  handle those places with simple trivial patches.

  Out of that work I discovered we have generic interfaces for storing
  quota by projid.  I had never heard of the project identifiers before.
  Adding full user namespace support for project identifiers accounts
  for most of the code size growth in my git tree.

  Ultimately there will be work to relax privlige checks from
  "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing
  root in a user names to do those things that today we only forbid to
  non-root users because it will confuse suid root applications.

  While I was pushing kuid_t and kgid_t changes deep into the audit code
  I made a few other cleanups.  I capitalized on the fact we process
  netlink messages in the context of the message sender.  I removed
  usage of NETLINK_CRED, and started directly using current->tty.

  Some of these patches have also made it into maintainer trees, with no
  problems from identical code from different trees showing up in
  linux-next.

  After reading through all of this code I feel like I might be able to
  win a game of kernel trivial pursuit."

Fix up some fairly trivial conflicts in netfilter uid/git logging code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits)
  userns: Convert the ufs filesystem to use kuid/kgid where appropriate
  userns: Convert the udf filesystem to use kuid/kgid where appropriate
  userns: Convert ubifs to use kuid/kgid
  userns: Convert squashfs to use kuid/kgid where appropriate
  userns: Convert reiserfs to use kuid and kgid where appropriate
  userns: Convert jfs to use kuid/kgid where appropriate
  userns: Convert jffs2 to use kuid and kgid where appropriate
  userns: Convert hpfs to use kuid and kgid where appropriate
  userns: Convert btrfs to use kuid/kgid where appropriate
  userns: Convert bfs to use kuid/kgid where appropriate
  userns: Convert affs to use kuid/kgid wherwe appropriate
  userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids
  userns: On ia64 deal with current_uid and current_gid being kuid and kgid
  userns: On ppc convert current_uid from a kuid before printing.
  userns: Convert s390 getting uid and gid system calls to use kuid and kgid
  userns: Convert s390 hypfs to use kuid and kgid where appropriate
  userns: Convert binder ipc to use kuids
  userns: Teach security_path_chown to take kuids and kgids
  userns: Add user namespace support to IMA
  userns: Convert EVM to deal with kuids and kgids in it's hmac computation
  ...
2012-10-02 11:11:09 -07:00
Michal Nazarewicz bdd43cb39f drivers: dma-contiguous: refactor dma_alloc_from_contiguous()
The dma_alloc_from_contiguous() function returns either a valid pointer
to a page structure or NULL, the error code set when pageno >= cma->count
is not used at all and can be safely removed.

This commit also changes the function to avoid goto and have only one exit
path and one place where mutex is unlocked.

Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
[fixed compilation break caused by missing semicolon]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-10-02 08:57:45 +02:00
Linus Torvalds 06d2fe153b Driver core merge for 3.7-rc1
Here is the big driver core update for 3.7-rc1.
 
 A number of firmware_class.c updates (as you saw a month or so ago), and
 some hyper-v updates and some printk fixes as well.  All patches that
 are outside of the drivers/base area have been acked by the respective
 maintainers, and have all been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlBp3vkACgkQMUfUDdst+ylQoACgldktGFgkCLzH+rGYthrXOC5P
 9hUAnjmOhdoHlMTL81vWTlH+BrGernym
 =khrr
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core merge from Greg Kroah-Hartman:
 "Here is the big driver core update for 3.7-rc1.

  A number of firmware_class.c updates (as you saw a month or so ago),
  and some hyper-v updates and some printk fixes as well.  All patches
  that are outside of the drivers/base area have been acked by the
  respective maintainers, and have all been in the linux-next tree for a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'driver-core-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
  memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()
  device.h: Add missing inline to #ifndef CONFIG_PRINTK dev_vprintk_emit
  memory: emif: Add ifdef CONFIG_DEBUG_FS guard for emif_debugfs_[init|exit]
  Documentation: Fixes some translation error in Documentation/zh_CN/gpio.txt
  Documentation: Remove 3 byte redundant code at the head of the Documentation/zh_CN/arm/booting
  Documentation: Chinese translation of Documentation/video4linux/omap3isp.txt
  device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
  dev: Add dev_vprintk_emit and dev_printk_emit
  netdev_printk/netif_printk: Remove a superfluous logging colon
  netdev_printk/dynamic_netdev_dbg: Directly call printk_emit
  dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
  driver-core: Shut up dev_dbg_reatelimited() without DEBUG
  tools/hv: Parse /etc/os-release
  tools/hv: Check for read/write errors
  tools/hv: Fix exit() error code
  tools/hv: Fix file handle leak
  Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO
  Tools: hv: Rename the function kvp_get_ip_address()
  Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO
  Tools: hv: Add an example script to configure an interface
  ...
2012-10-01 12:10:44 -07:00
Al Viro cb0942b812 make get_file() return its argument
simplifies a bunch of callers...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-09-26 21:10:25 -04:00
Rafael J. Wysocki b9142167a2 Merge branch 'pm-qos'
* pm-qos:
  Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code"
2012-09-24 21:41:31 +02:00
Rafael J. Wysocki 8376869e51 Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code"
This reverts commit fc2fb3a075.

The problem with the above commit is that it makes the device PM QoS
core code hold a spinlock around blocking_notifier_call_chain()
invocations.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-24 21:39:36 +02:00
Rafael J. Wysocki 057d51a126 Merge branch 'pm-sleep'
* pm-sleep:
  PM: Prevent runtime suspend during system resume
  PM / Sleep: use resume event when call dpm_resume_early

Conflicts:
	drivers/base/power/main.c (trivial)
2012-09-24 13:31:38 +02:00
Rafael J. Wysocki 071f58279f Merge branch 'pm-runtime'
* pm-runtime:
  PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2
2012-09-24 13:30:55 +02:00
Rafael J. Wysocki c26d4114aa Merge branch 'pm-qos'
* pm-qos:
  PM QoS: Use spinlock in the per-device PM QoS constraints code
2012-09-24 13:30:50 +02:00
Kevin Hilman 6f3c77b040 PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2
There are several drivers where the return value of
pm_runtime_get_sync() is used to decide whether or not it is safe to
access hardware and that don't provide .suspend() callbacks for system
suspend (but may use late/noirq callbacks.)  If such a driver happens
to call pm_runtime_get_sync() during system suspend, after the core
has disabled runtime PM, it will get the error code and will decide
that the hardware should not be accessed, although this may be a wrong
conclusion, depending on the state of the device when runtime PM was
disabled.

Drivers might work around this problem by using a test like:

   ret = pm_runtime_get_sync(dev);
   if (!ret || (ret == -EACCES && driver_private_data(dev)->suspended)) {
      /* access hardware */
   }

where driver_private_data(dev)->suspended is a flag set by the
driver's .suspend() method (that would have to be added for this
purpose).  However, that potentially would need to be done by multiple
drivers which means quite a lot of duplicated code and bloat.

To avoid that we can use the observation that the core sets
dev->power.is_suspended before disabling runtime PM and use that
instead of the driver's private flag.  Still, potentially many drivers
would need to repeat that same check in quite a few places, so it's
better to let the core do it.

Then we can be a bit smarter and check whether or not runtime PM was
disabled by the core only (disable_depth == 1) or by someone else in
addition to the core (disable_depth > 1).  In the former case
rpm_resume() can return 1 if the runtime PM status is RPM_ACTIVE,
because it means the device was active when the core disabled runtime
PM.  In the latter case it should still return -EACCES, because it
isn't clear why runtime PM has been disabled.

Tested on AM3730/Beagle-xM where a wakeup IRQ firing during the late
suspend phase triggers runtime PM activity in the I2C driver since the
wakeup IRQ is on an I2C-connected PMIC.

[rjw: Modified whitespace to follow the file's convention.]

Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-22 21:15:08 +02:00
Mark Brown 613dac31a6 Merge remote-tracking branches 'regmap/topic/cache' and 'regmap/topic/irq' into regmap-next 2012-09-22 12:02:05 -04:00
Eric W. Biederman 91fa2ccaa8 userns: Convert devtmpfs to use GLOBAL_ROOT_UID and GLOBAL_ROOT_GID
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21 03:13:05 -07:00
Alan Stern 88d26136a2 PM: Prevent runtime suspend during system resume
This patch (as1591) moves the pm_runtime_get_noresume() and
pm_runtime_put_sync() calls from __device_suspend() and
device_resume() to device_prepare() and device_complete() in the PM
core.

The reason for doing this is to make sure that parent devices remain
at full power (i.e., don't go into runtime suspend) while their
children are being resumed from a system sleep.

The PCI core already contained equivalent code to serve the same
purpose.  The patch removes the duplicated code, since it is no longer
needed.  One of the comments from the PCI core gets moved into the PM
core, and a second comment is added to explain whe the _get_noresume
and _put_sync calls are present.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-19 21:59:02 +02:00
Jean Pihet fc2fb3a075 PM QoS: Use spinlock in the per-device PM QoS constraints code
The per-device PM QoS locking requires a spinlock to be used. The reasons
are:
 - an alignement with the PM QoS core code, which is used by the per-device
   PM QoS code for the constraints lists management. The PM QoS core code
   uses spinlocks to protect the constraints lists,
 - some drivers need to use the per-device PM QoS functionality from
   interrupt context or spinlock protected context.
   An example of such a driver is the OMAP HSI (high-speed synchronous serial
   interface) driver which needs to control the IP block idle state
   depending on the FIFO empty state, from interrupt context.

Reported-by: Djamil Elaidi <d-elaidi@ti.com>
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-19 14:17:20 +02:00
Feng Hong 997a031107 PM / Sleep: use resume event when call dpm_resume_early
When dpm_suspend_noirq fail, state is PMSG_SUSPEND,
should change to PMSG_RESUME when dpm_resume_early is called

Signed-off-by: Feng Hong <hongfeng@marvell.com>
Signed-off-by: Raul Xiong <xjian@marvell.com>
Signed-off-by: Neil Zhang <zhangwm@marvell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-19 14:16:00 +02:00
Rafael J. Wysocki fa373abbbd Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq: OMAP: remove loops_per_jiffy recalculate for smp
  sections: fix section conflicts in drivers/cpufreq
  cpufreq: conservative: update frequency when limits are relaxed
  cpufreq / ondemand: update frequency when limits are relaxed
  cpufreq: Add a generic cpufreq-cpu0 driver
  PM / OPP: Initialize OPP table from device tree
  ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
  cpufreq: Remove support for hardware P-state chips from powernow-k8
  acpi-cpufreq: Add compatibility for legacy AMD cpb sysfs knob
  acpi-cpufreq: Add support for disabling dynamic overclocking
  ACPI: Add fixups for AMD P-state figures
  powernow-k8: delay info messages until initialization has succeeded
  cpufreq: Add warning message to powernow-k8
  acpi-cpufreq: Add quirk to disable _PSD usage on all AMD CPUs
  acpi-cpufreq: Add support for modern AMD CPUs
  cpufreq / powernow-k8: Fixup missing _PSS objects message
  PM / cpufreq: Initialise the cpu field during conservative governor start
2012-09-17 20:26:02 +02:00
Rafael J. Wysocki d6a56ae7ac Merge branch 'pm-sleep'
* pm-sleep:
  properly __init-annotate pm_sysrq_init()
  PM / wakeup: Use irqsave/irqrestore for events_lock
  PM / Freezer: Fix small typo "regrigerator"
  PM / Sleep: Print name of wakeup source that aborts suspend
2012-09-17 20:25:38 +02:00
Rafael J. Wysocki 079d364b04 Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Fix compilation warning related to genpd_start_dev_no_timing()
  PM / Domains: Operations related to cpuidle using domain names
  PM / Domains: Document cpuidle-related functions and change their names
  PM / Domains: Add power-on function using names to identify domains
  PM / Domains: Make it possible to use names when adding subdomains
  PM / Domains: Make it possible to use domain names when adding devices
2012-09-17 20:25:33 +02:00
Rafael J. Wysocki 00e8b26133 Merge branch 'pm-timers'
* pm-timers:
  PM: Do not use the syscore flag for runtime PM
  sh: MTU2: Basic runtime PM support
  sh: CMT: Basic runtime PM support
  sh: TMU: Basic runtime PM support
  PM / Domains: Do not measure start time for "irq safe" devices
  PM / Domains: Move syscore flag from subsys data to struct device
  PM / Domains: Rename the always_on device flag to syscore
  PM / Runtime: Allow helpers to be called by early platform drivers
  PM: Reorganize device PM initialization
  sh: MTU2: Introduce clock events suspend/resume routines
  sh: CMT: Introduce clocksource/clock events suspend/resume routines
  sh: TMU: Introduce clocksource/clock events suspend/resume routines
  timekeeping: Add suspend and resume of clock event devices
  PM / Domains: Add power off/on function for system core suspend stage
  PM / Domains: Introduce simplified power on routine for system resume
2012-09-17 20:25:18 +02:00
Joe Perches 666f355f38 device and dynamic_debug: Use dev_vprintk_emit and dev_printk_emit
Convert direct calls of vprintk_emit and printk_emit to the
dev_ equivalents.

Make create_syslog_header static.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17 06:10:05 -07:00
Joe Perches 05e4e5b87a dev: Add dev_vprintk_emit and dev_printk_emit
Add utility functions to consolidate the use of
create_syslog_header and vprintk_emit.

This allows conversion of logging functions that
call create_syslog_header and then call vprintk_emit
or printk_emit to the dev_ equivalents.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17 06:10:05 -07:00
Joe Perches 798efc60e4 dev_dbg/dynamic_debug: Update to use printk_emit, optimize stack
commit c4e00daaa9
("driver-core: extend dev_printk() to pass structured data")
changed __dev_printk and broke dynamic-debug's ability to control the
dynamic prefix of dev_dbg(dev,..).

commit af7f2158fd
("drivers-core: make structured logging play nice with dynamic-debug")
made a minimal correction.

The current dynamic debug code uses up to 3 recursion levels via %pV.
This can consume quite a bit of stack.  Directly call printk_emit to
reduce the recursion depth.

These changes include:

dev_dbg:
o Create and use function create_syslog_header to format the syslog
  header for printk_emit uses.
o Call create_syslog_header and neaten __dev_printk
o Make __dev_printk static not global
o Remove include header declaration of __dev_printk
o Remove now unused EXPORT_SYMBOL() of __dev_printk
o Whitespace neatening

dynamic_dev_dbg:
o Remove KERN_DEBUG from dynamic_emit_prefix
o Call create_syslog_header and printk_emit
o Whitespace neatening

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-17 06:08:30 -07:00
Greg Kroah-Hartman 8f949b9a7e Merge 3.6-rc7 into driver-core-next
This pulls in the fixes in that branch that are needed here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-16 16:51:27 -07:00
Ming Lei cfe016b14e firmware loader: fix compile warning when CONFIG_PM=n
This patch replaces the previous macro of CONFIG_PM with
CONFIG_PM_SLEEP becasue firmware cache is only used in
system sleep situations.

Also this patch fixes the below compile warning when
CONFIG_PM=n:

	drivers/base/firmware_class.c:1147: warning: 'device_cache_fw_images'
	defined but not used
	drivers/base/firmware_class.c:1212: warning:
	'device_uncache_fw_images_delay' defined but not used

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-10 16:40:30 -07:00
Shawn Guo b496dfbc94 PM / OPP: Initialize OPP table from device tree
With a lot of devices booting from device tree nowadays, it requires
that OPP table can be initialized from device tree.  The patch adds
a helper function of_init_opp_table together with a binding doc for
that purpose.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-09 22:06:33 +02:00
Yunfan Zhang 8138073951 regmap: no need primary handler for nested irq
The primary handler will NOT be called if the interrupt nests into
another interrupt thread. Remove it to avoid confusing.

Signed-off-by: Yunfan Zhang <yfzhang@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-09 11:05:45 +08:00
Ming Lei ac39b3ea73 firmware loader: let caching firmware piggyback on loading firmware
After starting caching firmware, there is still some time left
before devices are suspended, during the period, request_firmware
or its nowait version may still be triggered by the below situations
to load firmware images which can't be cached during suspend/resume
cycle.

	- new devices added
	- driver bind
	- or device open kind of things

This patch utilizes the piggyback trick to cache firmware for
this kind of situation: just increase the firmware buf's reference
count and add the fw name entry into cache entry list after starting
caching firmware and before syscore_suspend() is called.

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06 14:46:16 -07:00
Ming Lei ef40bb1bd0 firmware loader: fix firmware -ENOENT situations
If the requested firmware image doesn't exist, firmware->priv
should be set for the later concurrent requests, otherwise
warning and oops will be triggered inside firmware_free_data().

Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06 14:46:16 -07:00
John Stultz 4955070974 PM / wakeup: Use irqsave/irqrestore for events_lock
Jon Medhurst (Tixy) recently noticed a problem with the
events_lock usage. One of the Android patches that uses
wakeup_sources calls wakeup_source_add() with irqs disabled.
However, the event_lock usage in wakeup_source_add() uses
spin_lock_irq()/spin_unlock_irq(), which reenables interrupts.
This results in lockdep warnings.

The fix is to use spin_lock_irqsave()/spin_lock_irqrestore()
instead for the events_lock.

References: https://bugs.launchpad.net/linaro-landing-team-arm/+bug/1037565
Reported-and-debugged-by: Jon Medhurst (Tixy) <tixy@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-06 23:19:06 +02:00
Sachin Kamat b3d3b9fb60 PM / Domains: Fix compilation warning related to genpd_start_dev_no_timing()
Function genpd_start_dev_no_timing was accessed inside CONFIG_PM_RUNTIME
macro but defined outside it. When the above macro was not defined the
compiler gave the following warning:

drivers/base/power/domain.c:96:12: warning:
‘genpd_start_dev_no_timing’ defined but not used [-Wunused-function]

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-06 23:10:53 +02:00
Peter Ujfalusi 1b8cb92906 driver core: Check if r->name is valid in platform_get_resource_byname()
Safety check for the validity of the resource name before calling strcmp().
If the resource name is NULL do not compare it, just skip it.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06 13:29:11 -07:00
Rafael J. Wysocki 74a2799ab5 PM / Domains: Operations related to cpuidle using domain names
Make it possible to use domain names in operations connecting cpuidle
to and disconnecting it from a PM domain.  This is useful on
platforms where PM domain objects are organized in such a way that
the names of the domains are easier to use than the addresses of
those objects.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:53 +02:00
Rafael J. Wysocki 40114447a7 PM / Domains: Document cpuidle-related functions and change their names
The names of the cpuidle-related functions in
drivers/base/power/domain.c are inconsistent with the names of the
other exported functions in that file (the "pm_" prefix is missing
from them) and they are missing kerneldoc comments.

Fix that by adding the missing "pm_" prefix to the names of those
functions and add kerneldoc comments documenting them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:53 +02:00
Rafael J. Wysocki 8bc0251de2 PM / Domains: Add power-on function using names to identify domains
It sometimes is necessary to turn on a given PM domain when only
the name of it is known and the domain pointer is not readily
available.  For this reason, add a new helper function,
pm_genpd_name_poweron(), allowing the caller to turn on a PM domain
using its name for identification.  To avoid code duplication,
move the domain lookup code to a separate function.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:53 +02:00
Rafael J. Wysocki fb7268be9f PM / Domains: Make it possible to use names when adding subdomains
Add a new helper function, pm_genpd_add_subdomain_names(), allowing
the caller to add a subdomain to a generic PM domain using names for
domain identification (both domains have to be initialized before).

This function is useful for adding subdomains to PM domains whose
representations are stored in tables, when the caller doesn't know
the indices of the domain to add the subdomain to and of the
subdomain itself, but it knows the domains' names.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:52 +02:00
Rafael J. Wysocki b5abb085f5 PM / Domains: Make it possible to use domain names when adding devices
Add a new helper function __pm_genpd_name_add_device() allowing
a device to be added to a (registered) generic PM domain identified
by name.  Add a wrapper around it, pm_genpd_name_add_device(),
passing NULL as the last argument and reorganize pm_domains.h for the
new functions to be defined consistently with the existing ones.

These functions are useful for adding devices to PM domains whose
representations are stored in tables, when the caller doesn't know
the index of the domain to add the device to, but it knows the
domain's name.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:52 +02:00
Rafael J. Wysocki feb70af0e3 PM: Do not use the syscore flag for runtime PM
The syscore device PM flag used to mark the devices (belonging to
PM domains) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages, need not be
accessed by the runtime PM core functions, because all of the devices
it is set for need to be marked as "irq safe" anyway and are
protected from being turned off by runtime PM by ensuring that their
usage counters are always set.

For this reason, make the syscore flag system-wide PM-specific
and simplify the code used for manipulating it, because it need not
acquire the device's power.lock any more.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:05 +02:00
Rafael J. Wysocki e2e3e4e51e PM / Domains: Do not measure start time for "irq safe" devices
The genpd_start_dev() routine used by pm_genpd_runtime_resume()
to put "irq safe" devices into the full power state measures the
time necessary to "start" the device and updates its PM QoS timing
data if necessary.  This may lead to a deadlock if the given device
is a clock source and genpd_start_dev() is invoked from within the
clock source's .enable() routine, which will happen if that routine
uses pm_runtime_get_sync(), for example, to ensure that the device
is operational.

For this reason, introduce a special routine analogous to
genpd_start_dev(), called genpd_start_dev_no_timing(), that doesn't
carry out the time measurement, and make pm_genpd_runtime_resume()
use it instead of genpd_start_dev() to power up "irq safe" devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:04 +02:00
Rafael J. Wysocki dbf374142d PM / Domains: Move syscore flag from subsys data to struct device
The syscore device PM flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  That flag is
stored in the device's struct pm_subsys_data object whose address is
available from struct device.  However, in some situations it may be
convenient to set that flag before the device is added to a PM
domain, so it is better to move it directly to the "power" member of
struct device.  Then, it can be checked by the routines in
drivers/base/power/runtime.c and drivers/base/power/main.c, which is
more straightforward.

This also reduces the number of dev_gpd_data() invocations in the
generic PM domains framework, so the overhead related to the syscore
flag is slightly smaller.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:04 +02:00
Rafael J. Wysocki 6fb28badf2 PM / Domains: Rename the always_on device flag to syscore
The always_on device flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  Change name
of that flag to "syscore" to better reflect its purpose.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:03 +02:00
Rafael J. Wysocki bed2b42d9f PM / Runtime: Allow helpers to be called by early platform drivers
Runtime PM helper functions, like pm_runtime_get_sync(), cannot be
called by early platform device drivers, because the devices' power
management locks are not initialized at that time.  This is quite
inconvenient, so modify early_platform_add_devices() to initialize
the devices power management locks as appropriate and make sure that
they won't be initialized more than once if an early platform
device is going to be used as a regular one later.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:03 +02:00
Rafael J. Wysocki e91c11b1a7 PM: Reorganize device PM initialization
Make the device power management initialization more straightforward
by moving the initialization of common (i.e. used by both runtime PM
and system suspend) fields to a separate routine.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:03 +02:00
Rafael J. Wysocki 77f827de07 PM / Domains: Add power off/on function for system core suspend stage
Introduce function pm_genpd_syscore_switch() and two wrappers around
it, pm_genpd_syscore_poweroff() and pm_genpd_syscore_poweron(),
allowing the callers to let the generic PM domains framework know
that the given device is not necessary any more and its PM domain
can be turned off (the former) or that the given device will be
required immediately, so its PM domain has to be turned on (the
latter) during the system core (syscore) stage of system suspend
(or hibernation) and resume.

These functions will be used for handling devices registered as
clock sources and clock event devices that belong to PM domains.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-04 01:36:01 +02:00