Commit Graph

32 Commits

Author SHA1 Message Date
Milton Miller 5d7960ffb8 [POWERPC] boot: clean rule fixes
Now that obj-boot is in targets, we can remove (twice) it from clean-files.
zImage.initrd was missing, move zImage nearer where its used, and place
zImage.initrd next to it.  Remove non-ported zImage.sandpoint, and add
auto-generation of unconfigured zImage.initrd* like image-.

Signed-off-by: Milton Miller <miltonm@bga.com>
--
Testing: did a few builds and cleans
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 235fd83545 [POWERPC] boot: Use FORCE
Kbuild if_changed and if_changed_dep require the use of the dummy
FORCE to get the dependencies right.   Also add to targets to get
correct behavior.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-26 15:11:20 +10:00
Milton Miller 65b580395d [POWERPC] boot: rebuild when wrapper changes
Since there is magic defined per platform in the wrapper script, the
zImage targets should depend on it.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-21 22:35:40 +11:00
David Gibson cd197ffcf1 [POWERPC] zImage: Cleanup and improve zImage entry point
This patch re-organises the way the zImage wrapper code is entered, to
allow more flexibility on platforms with unusual entry conditions.
After this patch, a platform .o file has two options:

1) It can define a _zimage_start, in which case the platform code gets
   control from the very beginning of execution.  In this case the
   platform code is responsible for relocating the zImage if necessary,
   clearing the BSS, performing any platform specific initialization, and
   finally calling start() to load and enter the kernel.

2) It can define platform_init().  In this case the generic crt0.S
   handles initial entry, and calls platform_init() before calling
   start().  The signature of platform_init() is changed, however, to
   take up to 5 parameters (in r3..r7) as they come from the platform's
   initial loader, instead of a fixed set of parameters based on OF's
   usage.

   When using the generic crt0.S, the platform .o can optionally
   supply a custom stack to use, using the BSS_STACK() macro.  If this
   is not supplied, the crt0.S will assume that the loader has
   supplied a usable stack.

In either case, the platform code communicates information to the
generic code (specifically, a PROM pointer for OF systems, and/or an
initrd image address supplied by the bootloader) via a global
structure "loader_info".

In addition the wrapper script is rearranged to ensure that the
platform .o is always linked first.  This means that platforms where
the zImage entry point is at a fixed address or offset, rather than
being encoded in the binary header can be supported using option (1).

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:03 +11:00
David Gibson ad9d2716cf [POWERPC] zImage: Add more flexible gunzip convenience functions
At present, arch/powerpc/boot/main.c includes a gunzip() function
which is a convenient wrapper around zlib.  However, it doesn't
conveniently allow decompressing part of an image to one location,
then the remainder to a different address.

This patch adds a new set of more flexible convenience wrappers around
zlib, moving them to their own file, gunzip_util.c, in the process.
These wrappers allow decompressing sections of the compressed image to
different locations.  In addition, they transparently handle
uncompressed data, avoiding special case code to handle uncompressed
vmlinux images.

The patch also converts main.c to use the new wrappers, using the new
flexibility to avoid decompressing the vmlinux's ELF header twice as
we did previously.  That in turn means we avoid extending our
allocations for the vmlinux to allow space for the extra copy of the
ELF header.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-13 13:35:01 +11:00
Ishizaki Kou c347b7989e [POWERPC] Celleb: basic support
This patch adds base support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07 14:03:21 +11:00
Benjamin Herrenschmidt d28d027ab3 [POWERPC] Fix build of cell zImage.initrd
The patch adding support for zImage.ps3 didn't add a zImage.initrd.ps3
target causing builds of zImage.initrd to fail when ps3 is included in
the .config. The current method of generating ps3 images doesn't support
initrd's yet, so we create a dummy target that only displays a warning
message instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-20 16:37:48 +11:00
Geoff Levand 8a8944aab2 [POWERPC] ps3: add a default zImage target
Add a powerpc make target that can be loaded by the ps3 bootloader (kboot) and
set this as the default image to build for that platform.

Until the compressed zImage wrapper is made, this arranges for a stripped
vmlinux image to be built.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 11:28:17 +11:00
Geert Uytterhoeven dc0f80aa6a [POWERPC] Clean images in arch/powerpc/boot
Add a rule to clean up the various generated image files in
arch/powerpc/boot.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:51 +11:00
Arnd Bergmann 4ec64d5686 [POWERPC] ps3: add a default zImage target
It's currently not possible to build the default zImage
target if PS3 is the only selected platform. This is
a hack to fall back to building the pseries style
zImage, so the build is successful. This will probably
change in the future, if someone writes a PS3 specific
boot wrapper.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04 20:41:17 +11:00
Nicolas DET 7839af3354 [POWERPC] Compile a zImage.chrp if PPC_EFIKA seleted
Signed-off-by: Nicolas DET <nd@bplan-gmbh.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:41:04 +11:00
Paul Mackerras 79acbb3ff2 Merge branch 'linux-2.6' into for-linus 2006-12-04 15:59:07 +11:00
Mark A. Greer 25787afa5c [PATCH] Remove arch/powerpc/boot/zImage file.
The bootwrapper Makefile does not clean up the 'zImage' file that
may be left laying around.  This patch removes it when cleaning that
directory.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:48:59 +11:00
Matthew McClintock a0f467261a [POWERPC] Fixed some missing files to be deleted when running make clean
Fixed some missing files to be deleted when running make clean

Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 14:20:20 +10:00
Josh Boyer 0cfcccb468 [POWERPC] Add mktree utility to arch/powerpc/boot
This patch adds the mktree program that is needed to post process zImage
wrappers for various PowerPC 4xx boards

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-24 15:01:27 +10:00
Mark A. Greer 3688a0f484 [POWERPC] Don't require execute perms on wrapper when building zImage.initrd
Don't require that the wrapper script be executable when building
zImage.initrds.  This has already been fixed for zImages.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 18:23:17 +10:00
Mark A. Greer 01a6372008 [POWERPC] Add simple memory allocator to bootwrapper
Provide primitive malloc, free, and realloc functions for bootwrapper.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 12:49:19 +10:00
Mark A. Greer 0c176fa80f [POWERPC] Add non-OF serial console support
Add serial console support for non-OF systems.  There is a generic serial
console layer which calls a serial console driver.  Included is the serial
console driver for the ns16550 class of uarts.  Necessary support routines
are added as well.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 12:49:19 +10:00
Mark A. Greer 6fb4efc68f [POWERPC] Add flatdevtree source
Add the latest version of the flatdevtree code and corresponding glue.

A phandle table now tracks values returned by ft_find_device().
The value returned by ft_find_device() is a phandle which is really
an index into the phandle table.  The phandle table contains the address
of the corresponding node.  When the flat dt is edited/moved, the node
pointers in the phandle table are updated accordingly so no phandles kept
by the caller become stale.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-23 12:49:18 +10:00
Geoff Levand 020533ef24 [POWERPC] cell: fix default zImage build target
Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot
makefile.

CONFIG_PPC_CELL is used to build the generic cell processor support, and
is not an indication of platform.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 11:54:26 +10:00
Michael Ellerman dcf9065122 [POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spaces
My CROSS_COMPILE is "ccache /opt/compilers/blah", which confuses
the boot wrapper script. Quote CROSS_COMPILE and CROSS32_COMPILE
so they can safely contain spaces.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 11:54:26 +10:00
Andrew Morton 5b9b5572c8 [PATCH] git-powerpc: wrapper: don't require execute permissions
If you lose the x bit (eg: by using patch(1)), powerpc won't build.  Be
defensive about it...

Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04 07:55:32 -07:00
Paul Mackerras 2bf118197c [POWERPC] Create a "wrapper" script and use it in arch/powerpc/boot
This puts the knowledge of how to create various sorts of zImage
wrappers into a script called "wrapper" that could be used outside of
the kernel tree.  This changes arch/powerpc/boot so it first builds
the files that the wrapper script needs, then runs it to create
whatever flavours of zImage are required.

This version does uImages as well.  The zImage names are changed
slightly; zImage.pseries is the one with the PT_NOTE program header
entry added, and zImage.pmac is the one without.  If the
zImage.pseries gets made, it will also get hardlinked to zImage;
otherwise, if zImage.pmac is made, it gets hardlinked to zImage.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-28 14:30:02 +10:00
Mark A. Greer b2c5f61920 [POWERPC] Start arch/powerpc/boot code reorganization
This abstracts the operations used in the bootwrapper, and defines
the operations needed for the bootwrapper to run on an OF platform.

The operations have been divided up into platform ops (platform_ops),
firmware ops (fw_ops), device tree ops (dt_ops), and console ops
(console_ops).

The proper operations will be hooked up at runtime to provide the
functionality that you need.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-20 15:09:58 +10:00
Niels Kristian Bech Jensen fda7ffd25f [POWERPC] Add -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile.
I got some undefined references to __stack_chk_fail in
arch/powerpc/boot/stdio.o and arch/powerpc/boot/prom.o when I was trying
to build a kernel on Ubuntu Edgy Eft - which includes Stack Smashing
Protection.

This patch adds -fno-stack-protector to BOOTCFLAGS in
arch/powerpc/boot/Makefile (why does BOOTCFLAGS depend on HOSTCFLAGS and
not CFLAGS?).

Regards,
Niels Kristian Bech Jensen

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-07 20:19:15 +10:00
Richard Purdie 4f3865fb57 [PATCH] zlib_inflate: Upgrade library code to a recent version
Upgrade the zlib_inflate implementation in the kernel from a patched
version 1.1.3/4 to a patched 1.2.3.

The code in the kernel is about seven years old and I noticed that the
external zlib library's inflate performance was significantly faster (~50%)
than the code in the kernel on ARM (and faster again on x86_32).

For comparison the newer deflate code is 20% slower on ARM and 50% slower
on x86_32 but gives an approx 1% compression ratio improvement.  I don't
consider this to be an improvement for kernel use so have no plans to
change the zlib_deflate code.

Various changes have been made to the zlib code in the kernel, the most
significant being the extra functions/flush option used by ppp_deflate.
This update reimplements the features PPP needs to ensure it continues to
work.

This code has been tested on ARM under both JFFS2 (with zlib compression
enabled) and ppp_deflate and on x86_32.  JFFS2 sees an approx.  10% real
world file read speed improvement.

This patch also removes ZLIB_VERSION as it no longer has a correct value.
We don't need version checks anyway as the kernel's module handling will
take care of that for us.  This removal is also more in keeping with the
zlib author's wishes (http://www.zlib.net/zlib_faq.html#faq24) and I've
added something to the zlib.h header to note its a modified version.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Joern Engel <joern@wh.fh-wedel.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-22 15:05:58 -07:00
Paul Mackerras 9216ad8cb7 powerpc/32: Generate miboot images with ARCH=powerpc
Miboot images are apparently still used on some old 32-bit powermacs,
so build them with ARCH=powerpc if we're 32-bit and powermac support
is enabled.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-15 13:00:08 +11:00
Paul Mackerras 66a45dd362 powerpc: Make COFF zImages for old 32-bit powermacs
This adds code to build zImage.coff and/or zImage.initrd.coff when
CONFIG_PPC32 and CONFIG_PPC_PMAC are defined.  It also restructures
the OF client code and adds some workarounds for OF quirks on the
older machines.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14 15:04:06 +11:00
Kumar Gala 886c98d786 [PATCH] powerpc: Fix clean_files in arch/powerpc/boot Makefile
clean-files was being set twice rather than being appended to.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 16:28:13 +11:00
Kumar Gala 706e6b2caf [PATCH] powerpc: Fix suboptimal uImage target
Sam Ravnborg pointed out that calling if_changed was redundant in the
rule since a prerequisite had to have changed for us to get there.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:50:25 +11:00
Kumar Gala 8c441a57d7 [PATCH] powerpc: Add support for building uImages
powerpc: Add support for building uImages

Add support to build a kernel image bootable by u-boot.
Most of the makefile foo is taken from arch/ppc/boot/images/Makefile

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 14:50:21 +11:00
Paul Mackerras 94b212c29f powerpc: Move ppc64 boot wrapper code over to arch/powerpc
This also extends the code to handle 32-bit ELF vmlinux files as well
as 64-bit ones.  This is sufficient for booting on new-world 32-bit
powermacs (i.e. all recent machines).

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 13:52:21 +11:00