Commit Graph

278 Commits

Author SHA1 Message Date
Nicolas Ferre 4deb22a600 AT91: at91sam9261ek: remove C99 comments but keep information
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10 14:36:06 +02:00
Nicolas Ferre 64d72bbeeb AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC
The sd/mmc data structure is not used if SPI is selected. The configuration
of PIO on the board prevent from using both interfaces at the same time
(board dependent).
Remove the warnings at compilation time adding a preprocessor condition.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10 12:00:56 +02:00
Nicolas Ferre 1879c45cce AT91: dm9000 initialization update
Add information in dm9000 mac/phy chip initialization:
- irq resource details
- platform data details

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10 11:39:23 +02:00
Fabian Godehardt ab64511cbb AT91: SAM9G45 - add a separate clock entry for every single TC block
Without this patch you will not be able to register the first block
because of the second association call on at91_add_device_tc().

Signed-off-by: Fabian Godehardt <fg@emlix.com>
[nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09 20:14:43 +02:00
Nicolas Ferre 5afddee415 AT91: clock: peripheral clocks can have other parent than mck
While registering clock allow to set parent clock other
than mck. It is useful for clocks than can be seen as
child clock of a peripheral.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2010-09-09 20:13:23 +02:00
Nicolas Ferre 8d2602e077 AT91: change dma resource index
Reported-by: Dan Liang <dan.liang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-07 18:53:33 +02:00
Uwe Kleine-König 5f6878b0d2 ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/19] ARM: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
Date: Thu,  5 Aug 2010 16:08:46 +0200
Message-Id: <1281017333-5563-12-git-send-email-u.kleine-koenig@pengutronix.de>

These two structs are referenced by cam60_spi_devices.  The latter is
copied at init time to kmalloced memory and so the copy isn't freed after
booting.  So it must not contain references to .init memory.

This isn't noticed by modpost as cam60_spi_devices is in .init.data, too.

Noticed-and-Acked-by: Andrew Victor <linux@maxim.org.za>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:46:56 +01:00
Uwe Kleine-König 8436b41080 ARM: 6324/1: cam60: move cam60_spi_devices to .init.data
cam60_spi_devices is passed to at91_add_device_spi which calls
spi_register_board_info.  The latter makes a copy of it, so living in
.init.data is OK.

This fixes the following warning in cam60_defconfig:
	WARNING: vmlinux.o(.data+0x2a00): Section mismatch in reference from the variable cam60_spi_devices to the (unknown reference) .init.data:(unknown)
	The variable cam60_spi_devices references
	the (unknown reference) __initdata (unknown)
	If the reference is valid then annotate the
	variable with __init* or __refdata (see linux/init.h) or name the variable:
	*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10 22:46:42 +01:00
Ryan Mallon 4037242c4f ARM: 6209/3: at91_udc: Add vbus polarity and polling mode
Allow the vbus signal to optionally use polling. This is required if
the vbus signal is connected to an non-interrupting io expander for
example. If vbus is in polling mode, then it is assumed that the vbus
gpio may sleep. Also add an option to have vbus be an active low
signal. Both options are set in the platform data for the device.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-18 20:39:10 +01:00
Ryan Mallon 064baaca87 ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules
Add support for Bluewater Systems Snapper 9260/9G20 modules

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 12:31:52 +01:00
Ryan Mallon 708ee98c5b ARM: 6200/1: AT91: Define NR_BUILTIN_GPIO
Add definition for NR_BUILTIN_GPIO for AT91 family

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 12:31:51 +01:00
Nicolas Ferre 7dca3343fc ARM: 6185/1: AT91: PM: dual ram controller support
This rework allows to address tow memory controllers. AT91SAM9263 and
AT91SAM9G45 family have tow SDRAM or DDR/SDRAM controllers. Power management
should take care of this.
This patch modify the way RAM IP header files are implemented to allow
access to registers of both controllers ; it also adds some macros.

We also modify the power management files to use those modified header files.
Slow clock (assembly) and regular power management functions are synchronized
for setting of RAM self-refresh procedure:
(lpr & ~AT91_DDRSDRC_LPCB) | AT91_DDRSDRC_LPCB_SELF_REFRESH

Note that AT91RM9200 is not impacted by this modification.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-09 12:31:50 +01:00
Nicolas Ferre 5f9f0a412f ARM: 6169/1: AT91: add new at91 chips in at91sam9g45 family
This is the basic support for at91sam9g46, at91sam9m10 and at91sam9m11. Those
are just very basic cpu macros and clock definition.

Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16 23:00:02 +01:00
Dmitry Eremin-Solenikov 8a5c9e3937 ARM: 6163/1: at91sam9g20ek: add fixed-value regulator for wm8731
If CONFIG_REGULATOR is enabled, wm8731 fails on AT91SAM9G20EK board,
since codec driver requires several voltage supplies and none are
provided currently. As requires voltages are hardwired to 3V3, use fixed
voltage regulator for this chip.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16 23:00:01 +01:00
Dmitry Eremin-Solenikov 5e886f68e5 ARM: 6162/1: at91sam9g20ek: add fixed-value regulator for wm8731
If CONFIG_REGULATOR is enabled, wm8731 fails on AT91SAM9G20EK board,
since codec driver requires several voltage supplies and none are
provided currently. As requires voltages are hardwired to 3V3, use fixed
voltage regulator for this chip.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-06-16 23:00:01 +01:00
Andrea Gelmini becba8a358 ARM: mach-at91: duplicated include
arch/arm/mach-at91/board-sam9m10g45ek.c: mach/hardware.h is included more than once

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-24 20:40:13 +01:00
Russell King 717e7c2672 ARM: remove 'select GENERIC_TIME'
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME'
is redundant.  Remove them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-18 08:17:56 +01:00
Russell King ac1d426e82 Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig
2010-05-17 17:24:04 +01:00
Russell King c39e52a793 Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', 'omap', 'pxa', 'spear' and 'versatile' into devel
Conflicts:
	arch/arm/Makefile
	arch/arm/common/Makefile
	arch/arm/mm/Kconfig
2010-05-17 11:53:39 +01:00
Claudio Scordino e8faff7330 ARM: 6092/1: atmel_serial: support for RS485 communications
Final version of the patch that adds support for RS485 communications to the atmel_serial driver.

The patch has been already sent and discussed on both linux-kernel and linux-arm-kernel mailing lists several times.

Many people collaborated to improve and test the code:

Tested-by: Sebastian Heutling <Sebastian.Heutling@who-ing.de>
Tested-by: Bernhard Roth <br@pwrnet.de>
Reviewed-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Michael Trimarchi <michael@evidence.eu.com>
Signed-off-by: Rick Bronson <rick@efn.org>
Signed-off-by: Sebastian Heutling <Sebastian.Heutling@who-ing.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04 16:59:11 +01:00
Anders Larsen aec9562f3d ARM: 6053/1: AT91: Save power by disabling the processor clock when CPU is idle
Disable the processor clock when the CPU is idle.

This saves much more power than merely entering 'Wait for Interrupt' mode.
Since JTAG-debugging doesn't work when the processor clock is switched off,
make it conditional on CONFIG_DEBUG_KERNEL.

Signed-off-by: Anders Larsen <al@alarsen.net>
Acked-by: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 23:13:13 +01:00
Nicolas Ferre e2941054ed ARM: 6056/1: AT91: at91sam9g10 chip identification changed
A bit in the at91sam9g10 identification number changed between Engineering
Sample and final product. This patch will identify both as being at91sam9g10.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 16:56:27 +01:00
Christian Glindkamp 9b404b7cc3 ARM: 6054/1: AT91: taskit PortuxG20 and Stamp9G20 board support
Both boards share the same board file, as the PortuxG20 is basically an
SBC based on the Stamp9G20.

Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:24:53 +01:00
Ernst Schwab b1cdbb5f83 ARM: 5974/1: arm/mach-at91 Makefile: remove two blanks.
Cosmetic change to mach-at91 Makefile: remove two blanks introduced
by earlier patches.

Signed-off-by: Ernst Schwab <eschwab@online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:22:44 +01:00
Anders Larsen 317aa408d6 ARM: 5975/1: AT91 slow-clock suspend: don't wait when turning PLLs off
From: Julien Langer <julien.langer@gmail.com>

AT91: when turning off the PLLs during suspend, don't wait for the lock
flag to be set. Previously the code would always run into the loop
limitation of 1000 iterations because the flag is never set when turning
the PLLs off.

Comments from Anders Larsen:

 (in http://marc.info/?l=linux-kernel&m=127058929724193&w=2)

Signed-off-by: Julien Langer <julien.langer@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:08:43 +01:00
Anders Larsen 9823f1a846 ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
at91 slow-clock resume: Don't wait for a disabled PLL to lock.

We run into this problem with the PLLB on the at91: ohci-at91 disables
the PLLB when going to suspend. The slowclock code however tries to do
the same: It saves the PLLB register value and when restoring the value
during resume, it waits for the PLLB to lock again. However the PLL will
never lock and the loop would run into its timeout because the slowclock
code just stored and restored an empty register.
This fixes the problem by only restoring PLLA/PLLB when they were enabled
at suspend time.

Cc: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-09 08:31:04 +01:00
John Stultz 5cfc8ee0bb ARM: convert arm to arch_gettimeoffset()
Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure,
reducing the amount of arch specific code we need to maintain.

The arm architecture is the last arch that need to be converted.

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-03-24 08:08:58 +00:00
Rob Alley 438ff39d78 ARM: 5986/1: at91sam9g20-ek: Correct braces in I2C registration code
The change introduced in patch 5596/1 used incorrect bracing which
resulted in the AT24 EEPROM no longer being registered.  This patch
corrects the bracing and allows both the WM8731 audio device and AT24
EEPROM device to be registered.

Signed-off-by: Rob Alley <rob.alley@navmanwireless.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-03-13 10:48:21 +00:00
Linus Torvalds c32da02342 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX
2010-03-12 16:04:50 -08:00
Russell King 988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Russell King 186f93ea1f Merge branch 'tmpreg' into devel
Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-ux500/include/mach/debug-macro.S
2010-02-25 22:07:25 +00:00
Tony Lindgren 4e6d488af3 ARM: 5910/1: ARM: Add tmp register for addruart and loadsp
Otherwise more complicated uart configuration won't be possible.
We can use r1 for tmp register for both head.S and debug.S.

NOTE: This patch depends on another patch to add the the tmp register
into all debug-macro.S files. That can be done with:

$ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/"
	arch/arm/*/include/*/debug-macro.S

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 17:27:52 +00:00
Daniel Mack 1537a3638c tree-wide: fix 'lenght' typo in comments and code
Some misspelled occurences of 'octet' and some comments were also fixed
as I was on it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:45 +01:00
Uwe Kleine-König 501d70383a arm/at91: Don't disable irqs in set_next_event and set_mode callbacks
on AT91 the timer irq is shared, so the handler might be entered without
irqs being disabled.  Though this should not happen as the timer irq is
registered early, there have been some reports on the mailing list.

To make debugging that problem easier next time it pops up a
WARN_ON_ONCE is added to the handler if irqs are not off.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-01-22 17:04:39 +01:00
Andrew Victor c9a8fdd8b3 ARM: 5851/1: [AT91] AT572D940HF-EK board support
Add support for the Atmel AT572D940HF-EK board (development board for
the AT572D940HF processor).

Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-20 12:36:27 +00:00
Andrew Victor 5e38efae96 ARM: 5850/1: [AT91] AT572D940HF processor support
Add support for the Atmel AT572D940HF processor (DIOPSIS range).
This processor integrates an ARM926 core, a DSP and the SoC
peripherals usually found on an AT91 processor (USART, SSC, SPI, TWI,
CAN, etc)

Signed-off-by: Antonio R. Costa <costa.antonior@gmail.com>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-20 12:34:06 +00:00
Nicolas Ferre 2635d1ba71 atmel-mci: change use of dma slave interface
Allow the use of another DMA controller driver in atmel-mci sd/mmc driver.
 This adds a generic dma_slave pointer to the mci platform structure where
we can store DMA controller information.  In atmel-mci we use information
provided by this structure to initialize the driver (with new helper
functions that are architecture dependant).

This also adds at32/avr32 chip modifications to cope with this new access
method.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:35 -08:00
Linus Torvalds fa395aaec8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits)
  Input: appletouch - give up maintainership
  Input: dm355evm_kbd - switch to using sparse keymap library
  Input: wistron_btns - switch to using sparse keymap library
  Input: add generic support for sparse keymaps
  Input: fix memory leak in force feedback core
  Input: wistron - remove identification strings from DMI table
  Input: psmouse - remove identification strings from DMI tables
  Input: atkbd - remove identification strings from DMI table
  Input: i8042 - remove identification strings from DMI tables
  DMI: allow omitting ident strings in DMI tables
  Input: psmouse - do not carry DMI data around
  Input: matrix-keypad - switch to using dev_pm_ops
  Input: keyboard - fix lack of locking when traversing handler->h_list
  Input: gpio_keys - scan gpio state at probe and resume time
  Input: keyboard - add locking around event handling
  Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller
  Input: xpad - add two new Xbox 360 devices
  Input: polled device - do not start polling if interval is zero
  Input: polled device - schedule first poll immediately
  Input: add S3C24XX touchscreen driver
  ...
2009-12-09 19:52:01 -08:00
Russell King 0719dc3413 Merge branch 'devel-stable' into devel 2009-12-05 10:35:33 +00:00
Russell King e28edb723e Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into devel 2009-12-05 10:35:18 +00:00
Dmitry Torokhov 467832032c Merge commit 'v2.6.32' into next 2009-12-02 23:38:13 -08:00
Nicolas Ferre 985f37f827 AT91: add touchscreen support for at91sam9g45ekes
New at91sam9g45ekes board provides a LCD with resistive touchscreen.
This is the support of this feature by atmel_tsadcc driver. This also
sets up platform parameters to be passed to the driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20 00:55:38 -08:00
Nicolas Ferre 423c9b0dc3 AT91: add platform parameters for atmel_tsadcc in at91sam9rlek
Setup platform parameters in at91sam9rl-ek board to be passed to
atmel_tsadcc touchscreen.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-20 00:55:29 -08:00
Nicolas Ferre 0f74296a0f at91: at91sam9g20ek modify dual slot evaluation kit
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the
previous dual slot board definition to match the official rev. C board. It also
allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one.

Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC
slot A. This lead to a modification of those definitions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:57:50 +01:00
Nicolas Ferre 0912e5359f atmel_lcdfb Kconfig: remove long dependency line
Many Atmel SOC are embedding a LCD controller. This patch removes the long
dependency line for this Atmel LCD framebuffer driver configuration entry.
The HAVE_FB_ATMEL configuration option is located in the video Kconfig file
as it may be setup by ARM/AT91 and AVR32 chips.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:56:23 +01:00
Jean-Christophe PLAGNIOL-VILLARD 2ef9f59a7a at91: Kconfig simplification
Instead of adding "depends on" at config level, introduce HAVE_* config
variables. Add them at machine or soc level to specify the ability of a
particular support.
It will ease new board introduction and readability.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:56:22 +01:00
Jean-Christophe PLAGNIOL-VILLARD c4e4ab9f23 at91: remove not needed depends on
Those "depends on" are a double check as all machine entries are
surrounded by "if <ARCH_xxx>" conditions.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:56:21 +01:00
Nicolas Ferre fdcad71cef at91: at91sam9g20ek modify dual slot evaluation kit
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the
previous dual slot board definition to match the official rev. C board. It also
allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one.

Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC
slot A. This lead to a modification of those definitions.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-16 16:55:55 +01:00
Uwe Kleine-König 01c62c9b32 ARM: 5782/1: at91: support for eco920
CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig.  The name is
wrong, but this is better than adding another defconfig or don't get
compile coverage at all.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-10 23:46:35 +00:00