Commit Graph

32 Commits

Author SHA1 Message Date
Neil Horman c2355e1ab9 bonding: Fix bonding drivers improper modification of netpoll structure
The bonding driver currently modifies the netpoll structure in its xmit path
while sending frames from netpoll.  This is racy, as other cpus can access the
netpoll structure in parallel. Since the bonding driver points np->dev to a
slave device, other cpus can inadvertently attempt to send data directly to
slave devices, leading to improper locking with the bonding master, lost frames,
and deadlocks.  This patch fixes that up.

This patch also removes the real_dev pointer from the netpoll structure as that
data is really only used by bonding in the poll_controller, and we can emulate
its behavior by check each slave for IS_UP.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18 08:32:07 -07:00
Herbert Xu f0f9deae9e netpoll: Disable IRQ around RCU dereference in netpoll_rx
We cannot use rcu_dereference_bh safely in netpoll_rx as we may
be called with IRQs disabled.  We could however simply disable
IRQs as that too causes BH to be disabled and is safe in either
case.

Thanks to John Linville for discovering this bug and providing
a patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-17 16:55:03 -07:00
John W. Linville 969a6e5217 net: make netpoll_rx return bool for !CONFIG_NETPOLL
"netpoll: Use 'bool' for netpoll_rx() return type." missed the case when
CONFIG_NETPOLL is disabled.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10 16:24:41 -07:00
Herbert Xu d5f31fbfd8 netpoll: Use correct primitives for RCU dereferencing
Now that RCU debugging checks for matching rcu_dereference calls
and rcu_read_lock, we need to use the correct primitives or face
nasty warnings.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 21:44:29 -07:00
Herbert Xu c18370f5b2 netpoll: Add netpoll_tx_running
This patch adds the helper netpoll_tx_running for use within
ndo_start_xmit.  It returns non-zero if ndo_start_xmit is being
invoked by netpoll, and zero otherwise.

This is currently implemented by simply looking at the hardirq
count.  This is because for all non-netpoll uses of ndo_start_xmit,
IRQs must be enabled while netpoll always disables IRQs before
calling ndo_start_xmit.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 10:58:40 -07:00
Herbert Xu 8fdd95ec16 netpoll: Allow netpoll_setup/cleanup recursion
This patch adds the functions __netpoll_setup/__netpoll_cleanup
which is designed to be called recursively through ndo_netpoll_seutp.

They must be called with RTNL held, and the caller must initialise
np->dev and ensure that it has a valid reference count.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 10:58:40 -07:00
Herbert Xu de85d99eb7 netpoll: Fix RCU usage
The use of RCU in netpoll is incorrect in a number of places:

1) The initial setting is lacking a write barrier.
2) The synchronize_rcu is in the wrong place.
3) Read barriers are missing.
4) Some places are even missing rcu_read_lock.
5) npinfo is zeroed after freeing.

This patch fixes those issues.  As most users are in BH context,
this also converts the RCU usage to the BH variant.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 10:58:38 -07:00
David S. Miller ffb273623b netpoll: Use 'bool' for netpoll_rx() return type.
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 01:31:27 -07:00
WANG Cong 0e34e93177 netpoll: add generic support for bridge and bonding devices
This whole patchset is for adding netpoll support to bridge and bonding
devices. I already tested it for bridge, bonding, bridge over bonding,
and bonding over bridge. It looks fine now.

To make bridge and bonding support netpoll, we need to adjust
some netpoll generic code. This patch does the following things:

1) introduce two new priv_flags for struct net_device:
   IFF_IN_NETPOLL which identifies we are processing a netpoll;
   IFF_DISABLE_NETPOLL is used to disable netpoll support for a device
   at run-time;

2) introduce one new method for netdev_ops:
   ->ndo_netpoll_cleanup() is used to clean up netpoll when a device is
     removed.

3) introduce netpoll_poll_dev() which takes a struct net_device * parameter;
   export netpoll_send_skb() and netpoll_poll_dev() which will be used later;

4) hide a pointer to struct netpoll in struct netpoll_info, ditto.

5) introduce ->real_dev for struct netpoll.

6) introduce a new status NETDEV_BONDING_DESLAE, which is used to disable
   netconsole before releasing a slave, to avoid deadlocks.

Cc: David Miller <davem@davemloft.net>
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06 00:47:21 -07:00
Daniel Borkmann 508e14b4a4 netpoll: allow execution of multiple rx_hooks per interface
Signed-off-by: Daniel Borkmann <danborkmann@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13 20:38:26 -08:00
Harvey Harrison e7557af56a netpoll: store local and remote ip in net-endian
Allows for the removal of byteswapping in some places and
the removal of HIPQUAD (replaced by %pI4).

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-28 23:55:58 -07:00
Herbert Xu d1c76af9e2 GRO: Move netpoll checks to correct location
As my netpoll fix for net doesn't really work for net-next, we
need this update to move the checks into the right place.  As it
stands we may pass freed skbs to netpoll_receive_skb.

This patch also introduces a netpoll_rx_on function to avoid GRO
completely if we're invoked through netpoll.  This might seem
paranoid but as netpoll may have an external receive hook it's
better to be safe than sorry.  I don't think we need this for
2.6.29 though since there's nothing immediately broken by it.

This patch also moves the GRO_* return values to netdevice.h since
VLAN needs them too (I tried to avoid this originally but alas
this seems to be the easiest way out).  This fixes a bug in VLAN
where it continued to use the old return value 2 instead of the
correct GRO_DROP.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-16 10:50:02 -07:00
Herbert Xu d565b0a1a9 net: Add Generic Receive Offload infrastructure
This patch adds the top-level GRO (Generic Receive Offload) infrastructure.
This is pretty similar to LRO except that this is protocol-independent.
Instead of holding packets in an lro_mgr structure, they're now held in
napi_struct.

For drivers that intend to use this, they can set the NETIF_F_GRO bit and
call napi_gro_receive instead of netif_receive_skb or just call netif_rx.
The latter will call napi_receive_skb automatically.  When napi_gro_receive
is used, the driver must either call napi_complete/napi_rx_complete, or
call napi_gro_flush in softirq context if the driver uses the primitives
__napi_complete/__napi_rx_complete.

Protocols will set the gro_receive and gro_complete function pointers in
order to participate in this scheme.

In addition to the packet, gro_receive will get a list of currently held
packets.  Each packet in the list has a same_flow field which is non-zero
if it is a potential match for the new packet.  For each packet that may
match, they also have a flush field which is non-zero if the held packet
must not be merged with the new packet.

Once gro_receive has determined that the new skb matches a held packet,
the held packet may be processed immediately if the new skb cannot be
merged with it.  In this case gro_receive should return the pointer to
the existing skb in gro_list.  Otherwise the new skb should be merged into
the existing packet and NULL should be returned, unless the new skb makes
it impossible for any further merges to be made (e.g., FIN packet) where
the merged skb should be returned.

Whenever the skb is merged into an existing entry, the gro_receive
function should set NAPI_GRO_CB(skb)->same_flow.  Note that if an skb
merely matches an existing entry but can't be merged with it, then
this shouldn't be set.

If gro_receive finds it pointless to hold the new skb for future merging,
it should set NAPI_GRO_CB(skb)->flush.

Held packets will be flushed by napi_gro_flush which is called by
napi_complete and napi_rx_complete.

Currently held packets are stored in a singly liked list just like LRO.
The list is limited to a maximum of 8 entries.  In future, this may be
expanded to use a hash table to allow more flows to be held for merging.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-15 23:38:52 -08:00
David S. Miller d9452e9f81 [NETPOLL]: Revert two bogus cleanups that broke netconsole.
Based upon a report by Andrew Morton and code analysis done
by Jarek Poplawski.

This reverts 33f807ba0d ("[NETPOLL]:
Kill NETPOLL_RX_DROP, set but never tested.")  and
c7b6ea24b4 ("[NETPOLL]: Don't need
rx_flags.").

The rx_flags did get tested for zero vs. non-zero and therefore we do
need those tests and that code which sets NETPOLL_RX_DROP et al.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04 12:28:49 -08:00
Stephen Hemminger c7b6ea24b4 [NETPOLL]: Don't need rx_flags.
The rx_flags variable is redundant. Turning rx on/off is done
via setting the rx_np pointer.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:54:18 -08:00
Stephen Hemminger 0953864160 [NETPOLL]: no need to store local_mac
The local_mac is managed by the network device, no need to keep a
spare copy and all the management problems that could cause.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28 14:54:17 -08:00
Satyam Sharma 0bcc181618 [NET] netconsole: Support dynamic reconfiguration using configfs
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>.

This patch introduces support for dynamic reconfiguration (adding, removing
and/or modifying parameters of netconsole targets at runtime) using a
userspace interface exported via configfs.  Documentation is also updated
accordingly.

Issues and brief design overview:

(1) Kernel-initiated creation / destruction of kernel objects is not
    possible with configfs -- the lifetimes of the "config items" is managed
    exclusively from userspace.  But netconsole must support boot/module
    params too, and these are parsed in kernel and hence netpolls must be
    setup from the kernel.  Joel Becker suggested to separately manage the
    lifetimes of the two kinds of netconsole_target objects -- those created
    via configfs mkdir(2) from userspace and those specified from the
    boot/module option string.  This adds complexity and some redundancy here
    and also means that boot/module param-created targets are not exposed
    through the configfs namespace (and hence cannot be updated / destroyed
    dynamically).  However, this saves us from locking / refcounting
    complexities that would need to be introduced in configfs to support
    kernel-initiated item creation / destroy there.

(2) In configfs, item creation takes place in the call chain of the
    mkdir(2) syscall in the driver subsystem.  If we used an ioctl(2) to
    create / destroy objects from userspace, the special userspace program is
    able to fill out the structure to be passed into the ioctl and hence
    specify attributes such as local interface that are required at the time
    we set up the netpoll.  For configfs, this information is not available at
    the time of mkdir(2).  So, we keep all newly-created targets (via
    configfs) disabled by default.  The user is expected to set various
    attributes appropriately (including the local network interface if
    required) and then write(2) "1" to the "enabled" attribute.  Thus,
    netpoll_setup() is then called on the set parameters in the context of
    _this_ write(2) on the "enabled" attribute itself.  This design enables
    the user to reconfigure existing netconsole targets at runtime to be
    attached to newly-come-up interfaces that may not have existed when
    netconsole was loaded or when the targets were actually created.  All this
    effectively enables us to get rid of custom ioctls.

(3) Ultra-paranoid configfs attribute show() and store() operations, with
    sanity and input range checking, using only safe string primitives, and
    compliant with the recommendations in Documentation/filesystems/sysfs.txt.

(4) A new function netpoll_print_options() is created in the netpoll API,
    that just prints out the configured parameters for a netpoll structure.
    netpoll_parse_options() is modified to use that and it is also exported to
    be used from netconsole.

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Acked-by: Keiichi Kii <k-keiichi@bx.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:48:06 -07:00
Stephen Hemminger bea3348eef [NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.

In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.

The signature of the ->poll() call back goes from:

	int foo_poll(struct net_device *dev, int *budget)

to

	int foo_poll(struct napi_struct *napi, int budget)

The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract).  The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.

The napi_struct is to be embedded in the device driver private data
structures.

Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler.  Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.

With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.

Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.

[ Ported to current tree and all drivers converted.  Integrated
  Stephen's follow-on kerneldoc additions, and restored poll_list
  handling to the old style to fix mutual exclusion issues.  -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:47:45 -07:00
David Howells 6d5aefb8ea WorkQueue: Fix up arch-specific work items where possible
Fix up arch-specific work items where possible to use the new work_struct and
delayed_work structs.

Three places that enqueue bits of their stack and then return have been marked
with #error as this is not permitted.

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-12-05 19:36:26 +00:00
Stephen Hemminger bf6bce71ea netpoll header cleanup
As Steve left netpoll beast, hopefully not to return soon.
He noticed that the header was messy. He straightened it
up and polished it a little, then waved goodbye.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02 21:22:38 -08:00
Stephen Hemminger 5de4a473bd netpoll queue cleanup
The beast had a long and not very happy history. At one
point, a friend (netdump) had asked that he open up a little.
Well, the friend was long gone now, and the beast had
this dangling piece hanging (netpoll_queue).

It wasn't hard to stitch the netpoll_queue back in
where it belonged and make everything tidy.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02 21:22:37 -08:00
Stephen Hemminger 2bdfe0baec netpoll retry cleanup
The netpoll beast was still not happy. If the beast got
clogged pipes, it tended to stare blankly off in space
for a long time.

The problem couldn't be completely fixed because the
beast talked with irq's disabled. But it could be made
less painful and shorter.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02 21:22:36 -08:00
Stephen Hemminger b6cd27ed33 netpoll per device txq
When the netpoll beast got really busy, it tended to clog
things, so it stored them for later. But the beast was putting
all it's skb's in one basket. This was bad because maybe some
pipes were clogged and others were not.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02 21:22:33 -08:00
Stephen Hemminger 93ec2c723e netpoll info leak
After looking harder, Steve noticed that the netpoll
beast leaked a little every time it shutdown for a nap.
Not a big leak, but a nuisance kind of thing.

He took out his refcount duct tape and patched the
leak. It was overkill since there was already other
locking in that area, but it looked clean and wouldn't
attract fleas.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-12-02 21:22:32 -08:00
Neil Horman 068c6e98bc [NET] netpoll: break recursive loop in netpoll rx path
The netpoll system currently has a rx to tx path via:

netpoll_rx
 __netpoll_rx
  arp_reply
   netpoll_send_skb
    dev->hard_start_tx

This rx->tx loop places network drivers at risk of inadvertently causing a
deadlock or BUG halt by recursively trying to acquire a spinlock that is
used in both their rx and tx paths (this problem was origionally reported
to me in the 3c59x driver, which shares a spinlock between the
boomerang_interrupt and boomerang_start_xmit routines).

This patch breaks this loop, by queueing arp frames, so that they can be
responded to after all receive operations have been completed.  Tested by
myself and the reported with successful results.

Specifically it was tested with netdump.  Heres the BZ with details:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=194055

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-26 00:04:27 -07:00
Ben Dooks afb997c616 [NETPOLL]: wrong return for null netpoll_poll_lock()
When netpoll is not being used, the macro that
defines the removed routing netpoll_poll_lock
defines the return as zero, but the real
routine returns a `void *`

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-12 15:12:21 -07:00
Matt Mackall 53fb95d3c1 [NETPOLL]: fix initialization/NAPI race
This fixes a race during initialization with the NAPI softirq
processing by using an RCU approach.

This race was discovered when refill_skbs() was added to
the setup code.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-11 19:27:43 -07:00
Matt Mackall 0db1d6fc1e [NETPOLL]: add retry timeout
Add limited retry logic to netpoll_send_skb

Each time we attempt to send, decrement our per-device retry counter.
On every successful send, we reset the counter. 

We delay 50us between attempts with up to 20000 retries for a total of
1 second. After we've exhausted our retries, subsequent failed
attempts will try only once until reset by success.

Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-11 19:25:54 -07:00
Jeff Moyer fbeec2e155 [NETPOLL]: allow multiple netpoll_clients to register against one interface
This patch provides support for registering multiple netpoll clients to the
same network device.  Only one of these clients may register an rx_hook,
however.  In practice, this restriction has not been problematic.  It is
worth mentioning, though, that the current design can be easily extended to
allow for the registration of multiple rx_hooks.

The basic idea of the patch is that the rx_np pointer in the netpoll_info
structure points to the struct netpoll that has rx_hook filled in.  Aside
from this one case, there is no need for a pointer from the struct
net_device to an individual struct netpoll.

A lock is introduced to protect the setting and clearing of the np_rx
pointer.  The pointer will only be cleared upon netpoll client module
removal, and the lock should be uncontested.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-22 22:05:59 -07:00
Jeff Moyer 115c1d6e61 [NETPOLL]: Introduce a netpoll_info struct
This patch introduces a netpoll_info structure, which the struct net_device
will now point to instead of pointing to a struct netpoll.  The reason for
this is two-fold: 1) fields such as the rx_flags, poll_owner, and poll_lock
should be maintained per net_device, not per netpoll;  and 2) this is a first
step in providing support for multiple netpoll clients to register against the
same net_device.

The struct netpoll is now pointed to by the netpoll_info structure.  As
such, the previous behaviour of the code is preserved.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-22 22:05:31 -07:00
Jeff Moyer 6ca4f65e6b [NETPOLL]: Set poll_owner to -1 before unlocking in netpoll_poll_unlock()
This trivial patch moves the assignment of poll_owner to -1 inside of
the lock.  This fixes a potential SMP race in the code.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-22 22:04:55 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00