Currently, rbd_img_parent_read() assumes the incoming object request
contains bio data. But if a layered image is part of a multi-layer
stack of images it will result in read requests of page data to parent
images.
Fortunately, it's not hard to add support for page data.
This resolves:
http://tracker.ceph.com/issues/4939
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_img_obj_parent_read_full_callback() there is an assertion
intended to verify the size of the image request for a full parent
read was the size of the original request's target object. But
assertion was looking at the parent image order rather than the
original one, and these values can differ.
Fix that.
This resolves:
http://tracker.ceph.com/issues/4938
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This rearranges rbd_dev_v2_refresh() so it works more like
rbd_dev_v1_header_info(). While format 1 images need to read the
whole header object to get any information, format 2 can collect
almost all information selectively. So the one-time initialization
will remain in a separate function--based on rbd_dev_v2_probe().
Rename rbd_dev_v2_refresh() to be rbd_dev_v2_header_info(), and have
it call rbd_dev_v2_header_onetime() if it's being called for the
first time for the given rbd device.
Rename rbd_dev_v2_probe() to be rbd_dev_v2_header_onetime() and
remove the image size and snapshot context calls it held in
common with the refresh function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Get rid of the trivial wrapper functions rbd_dev_v1_refresh() and
rbd_dev_v1_probe(), substituting rbd_dev_v1_header_read() calls
in their place.
Rename rbd_dev_v1_header_read() to be rbd_dev_v1_header_info(), to
be more generic (it will better reflect what happens with format 2
images).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An rbd_dev structure's fields are all zero-filled for an initial
probe, so there's no need to explicitly zero the parent_spec
and parent_overlap fields in rbd_dev_v1_probe(). Removing these
assignments makes rbd_dev_v1_probe() *almost* trivial.
Move the dout() message that announces discovery of an image into
rbd_dev_image_probe(), generalize to support images in either format
and only show it if an image is fully discovered.
This highlights that are some unnecessary cleanups in the error
path for rbd_dev_v1_probe(), so they can be removed.
Now rbd_dev_v1_probe() *is* a trivial wrapper function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that rbd_header_from_disk() only fills in one-time fields once,
we can extend it slightly so it releases the other fields before
replacing their values. This way there's no need to pass a
temporary buffer and then copy all the results in. Just use the rbd
device header structure in rbd_header_from_disk() so its values get
updated directly.
Note that this means we need to take the header semaphore at the
point we update things. So pass the rbd_dev rather than the address
of its header as its first argument to rbd_header_from_disk(), and
have it return an error code.
As a result, rbd_dev_v1_header_read() does all the work,
rbd_read_header() becomes unnecessary, and rbd_dev_v1_refresh()
becomes a very simple wrapper.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This rearranges rbd_header_from_disk so that it:
- allocates the snapshot context right away
- keeps results in local variables, not changing the passed-in
header until it's known we'll succeed
- does initialization of set-once fields in a header only if
they have not already been set
The last point is moot at the moment, because rbd_read_header()
(the only caller) always supplies a zero-filled header buffer.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The passed-in header structure is zeroed in rbd_header_from_disk().
Instead, have the caller do it. Note that there are two callers,
rbd_dev_v1_refresh() and rbd_dev_v1_probe(). The latter already has
a zeroed header structure so zeroing it isn't necessary there.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Defer setting the size and features fields of a mapped image until
after the Linux disk structure is set up. Set the capacity of the
disk after that.
Rearrange the definition of rbd_image_header, separating the fields
that are set only once from those that can be updated.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Hold off setting the read-only flag in rbd_add() for an image being
mapped until we have successfully probed the image. At that point
we know whether it's a snapshot mapping or not, so we can set the
read-only flag in that one place rather than doing so (for
snapshots) in rbd_dev_mapping_set(). To do this, pass a flag to the
image probe routine indicating whether we want a read-only mapping.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This function is a duplicate of rbd_dev_mapping_clear(), and was
added by mistake.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently rbd_dev_mapping_set() looks up the snapshot id for the
snapshot whose name is found in the rbd device's spec structure.
That function gets called by rbd_dev_device_setup(), which is
called by rbd_add() *after* rbd_dev_image_probe(). If the
image probe succeeds, the rbd device's spec will already have
been updated to include names and ids for all fields.
Therefore there's no need to look up the snapshot id in
rbd_dev_mapping_set().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The presence of the LAYERING bit in an rbd image's feature mask does
not guarantee the image actually has a parent image. Currently that
bit is set only when a clone (i.e., image with a parent) is created,
but it is (currently) not cleared if that clone gets flattened back
into a "normal" image. A "parent_id" query will leave the
parent_spec for the image being mapped a null pointer, but will not
return an error.
Currently, whenever an image with the LAYERED feature gets mapped, a
warning about the use of layered images gets printed. But we don't
want to do this for a flattened image, so print the warning only
if we find there is a parent spec after the probe.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Since rbd_update_mapping_size() is now a trivial wrapper, just open
code it in its two callers.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a mapped image changes size, we change the capacity recorded
for the Linux disk associated with it, in rbd_update_mapping_size().
That function is called in two places--the format 1 and format 2
refresh routines.
There is no need to set the capacity while holding the header
semaphore. Instead, do it in the common rbd_dev_refresh(), using
the logic that's already there to initiate disk revalidation.
Add handling in the request function, just in case a request
that exceeds the capacity of the device comes in (perhaps one
that was started before a refresh shrunk the device).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This commit:
d98df63e rbd: revalidate_disk upon rbd resize
instituted a call to revalidate_disk() to notify interested parties
that a mapped image has changed size. This works well, as long as
the the rbd device doesn't map a snapshot.
A snapshot will never change size. However, the base image the
snapshot is associated with can, and it can do so while the snapshot
is mapped.
The problem is that the test for the size is looking at the size of
the base image, not the size of the mapped snapshot. This patch
corrects that.
Update the warning message shown in the event of error, and move
it into the callers.
This resolves:
http://tracker.ceph.com/issues/4911
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_dev_v2_refresh() is called, the rbd device already has a
snapshot context associated with it. But that never gets freed,
the pointer just gets overwritten.
Fix this by dropping the rbd device's reference to the snapshot
context before overwriting the pointer.
Because ceph_put_snap_context() already handles for a null pointer
we don't need to check for that (for the probe case, where no
context has yet been assigned).
This resolves:
http://tracker.ceph.com/issues/4912
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a read for a layered image object finds the target object
doesn't exist, a read image request for the parent image is created
and submitted. When that completes, the callback routine was
not releasing that parent image request. Fix that.
The slab allocation stuff just added has greatly simplified the
search for the source of this memory leak.
This resolves:
http://tracker.ceph.com/issues/4803
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a slab cache to manage allocation of ceph_osdc_request
structures.
This resolves:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a slab cache to manage ceph_msg_data structure allocation.
This is part of:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a slab cache to manage ceph_msg structure allocation.
This is part of:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The names of objects used for image object requests are always fixed
size. So create a slab cache to manage them. Define a new function
rbd_segment_name_free() to match rbd_segment_name() (which is what
supplies the dynamically-allocated name buffer).
This is part of:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a slab cache to manage rbd_obj_request allocation. We aren't
using a constructor, and we'll zero-fill object request structures
when they're allocated.
This is part of:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The next patch will define a slab allocator for a object requests.
To use that we'll need to allocate the name of an object separate
from the request structure itself.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a slab cache to manage rbd_img_request allocation. Nothing
too fancy at this point--we'll still initialize everything at
allocation time (no constructor)
This is part of:
http://tracker.ceph.com/issues/3926
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use bsearch(3) to make snapshot lookup by id more efficient. (There
could be thousands of snapshots, and conceivably many more.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This functionality inadvertently disappeared in the last patch.
Image snapshots can get removed at just about any time. In
particular it can disappear even if it is in use by an rbd
client as a mapped image.
The rbd client deals with such a disappearance by responding to new
requests with ENXIO. This is implemented by each rbd device
maintaining an EXISTS flag, which is normally set but cleared if a
snapshot disappears.
This patch (re-)implements the clearing of that flag.
Whenever mapped image header information is refreshed, if the
mapping is for a snapshot, verify the mapped snapshot is still
present in the updated snapshot context. If it is not, clear the
flag.
It is not necessary to check this in the initial probe, because the
probe will not succeed if the snapshot doesn't exist.
This resolves:
http://tracker.ceph.com/issues/4880
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We no longer use the snapshot list for anything. When we need to
look up a snapshot name, id, size, or feature mask, we just do it
directly rather than relying on this list being updated with every
refresh. The main reason it existed was for the benefit of the
device/sysfs entries that previously were associated with snapshots.
So get rid of the snapshot list, and struct rbd_snap, and the
hundreds of lines of code that supported them.
This resolves:
http://tracker.ceph.com/issues/4868
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch defines a handful of new functions that will allow
us to get rid of the rbd device structure's list of snapshots.
Define rbd_snap_id_by_name() to look up a snapshot id given its
name. This is efficient for format 1 images but not for format 2.
Fortunately it only gets called at mapping time so it's not that
critical.
Use rbd_snap_id_by_name() to find out the id for a snapshot getting
mapped, and pass that id to new functions rbd_snap_size() and
rbd_snap_features() to look up information about a given snapshot's
size and feature mask given its snapshot id. All this gets done
in rbd_dev_mapping_set().
As a result, snap_by_name() is no longer needed, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In order to align with what was needed for format 1 rbd images,
rbd_dev_v2_snap_info() was set up to take as argument an index into
the array of snapshot ids in a rbd device's snapshot context.
This switches that around, so we pass the snapshot id instead.
In doing this, rbd_snap_name() now returns a dynamically-allocated
string rather than a fixed one, so there's no need to make a
duplicate in its caller, rbd_dev_spec_update().
This means the following functions take a snapshot id where they
previously used an index value:
rbd_dev_snap_info()
rbd_dev_v1_snap_info()
rbd_dev_v2_snap_info()
A new function, rbd_dev_snap_index(), determines the snap index for
format 1 images and uses it to look up the name.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rather than scanning the list of snapshot structures for it, scan
the snapshot context buffer containing snapshot names in order to
determine for a format 1 image the name associated with a given
snapshot id.
Pull out the part of rbd_dev_v1_snap_info() that does this scan into
a new function, _rbd_dev_v1_snap_name(). Have that function return
a dynamically-allocated copy of the name, and don't duplicate it in
rbd_dev_v1_snap_info().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Nothing ever uses the version field maintained in the object request
structure any more, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Only NULL is passed as the version argument to rbd_obj_method_sync(),
so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Continued from the last patch, more parameters that can go away
because we no longer have a need to track object versions.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Several functions in rbd have parameters meant to allow the version
of an object to be passed in or out. The purpose of those was to
allow the version of a header object to be maintained, but we no
longer do that. As a result, these parameters are never actually
needed or used, so get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd code takes care to maintain the version of the header
object. This was done in hopes of using it to detect a change in
the object between reading it and setting up a watch request to
be notified of changes.
The mechanism was never fully implemented, however. And we now
avoid the original problem by setting up the watch request before
ever reading the content of the header.
The osd doesn't interpret the object version supplied with a WATCH
osd op, nor does it use the version supplied with a NOTIFY_ACK op
(we can just supply 0 for both). There is therefore no need to
maintain the header's object version any more, so stop doing so.
We'll be able to simplify some more rbd code in the next few patches
as a result of this.
This resolves:
http://tracker.ceph.com/issues/3952
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Make explicit that snapshot names don't change by making functions
return and take parameters that that point to const qualified data.
This resolves:
http://tracker.ceph.com/issues/4867
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Whenever a header object event causes a mapped rbd image to refresh
its header information, revalidate_disk() is being called. This was
done in rbd_dev_refresh() outside the control mutex in order to
avoid a lock inversion. Although a an event like this *might*
indicate the image has changed size, most of the time it does not.
Record the image size before and after the refresh, and only
call revalidate_disk() if it changes.
This resolves:
http://tracker.ceph.com/issues/4867
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A warning gets spewed for any image being probed, including parent
images. Set up a condition such that the warning message only gets
printed for the image being mapped, not any of its parents.
Also, I didn't like the way the warning ended up being so long.
Make it a terse warning instead. People experimenting with layering
will know what the message means.
This is part of:
http://tracker.ceph.com/issues/4867
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that we have a library routine to create snap contexts, use it.
This is part of:
http://tracker.ceph.com/issues/4857
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This creates a new source file "net/ceph/snapshot.c" to contain
utility routines related to ceph snapshot contexts. The main
motivation was to define ceph_create_snap_context() as a common way
to create these structures, but I've moved the definitions of
ceph_get_snap_context() and ceph_put_snap_context() there too.
(The benefit of inlining those is very small, and I'd rather
keep this collection of functions together.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Stop setting up Linux devices during the image probe operation.
Instead, set up the devices as a separate step after the image
probe, in rbd_add().
A consequence of this is that only mapped images get devices
assigned to them, which is pretty sweet.
This resolves:
http://tracker.ceph.com/issues/4774
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently an rbd_device structure gets destroyed from the release
routine for the device embedded within it. Stop doing that, instead
calling rbd_dev_image_release() right after rbd_bus_del_dev()
wherever the latter is called.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function rbd_dev_unprobe() which undoes state changes
that occur from calling rbd_dev_v1_probe() or rbd_dev_v2_probe().
Note that this is a superset of rbd_header_free(), which is now
getting removed (it seems to have been used improperly anyway).
Flesh out rbd_dev_image_release() so it undoes exactly what
rbd_dev_image_probe() does.
This means that:
- rbd_dev_device_release() gets called when the last device
reference gets dropped;
- that undoes everything done by the rbd_dev_device_setup() call
at the end of rbd_dev_image_probe() (and nothing more), ending
by calling rbd_dev_image_release(); and
- rbd_dev_image_release() undoes everything else done by
rbd_dev_image_probe() (and this includes a call to
rbd_dev_unprobe().
This means the image and device portions of an rbd device are fairly
cleanly separated now, so error paths should be a little easier to
verify than they used to be.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rename rbd_dev_probe_finish() to be rbd_dev_device_setup(). Its
purpose is to set up the Linux side of an rbd device mapping.
Rename rbd_dev_release() to be rbd_dev_device_release(), making
it more obvious it serves as the inverse of the setup function
(or it will).
Encapsulate some of what was done in rbd_dev_release() into a new
function rbd_dev_image_release(), which serves as the inverse of
setting up the ceph side of the mapped rbd image.
Define a new helper rbd_dev_clear_mapping() to simply zero out the
fields of a mapping structure--the inverse of rbd_dev_set_mapping().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Drop the module reference at the end of rbd_remove() for symmetry
with adding a reference at the top of rbd_add().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move setting up the watch request for an image so it's done in
rbd_dev_image_probe() rather than rbd_dev_probe_finish(). Move
it all the way up to before doing the initial probe. This avoids
a potential race condition, in which we get (and use) the initial
snapshot context for an image, and it gets changed between that
time and the time we get the watch set up.
This resolves:
http://tracker.ceph.com/issues/3871
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a format 2 image is refreshed, code is in place to verify that
the object order never changes from what it was originally. This
relies on the fact that the refresh will occur *after* an initial
load of information about the image.
An upcoming patch makes it possible for the refresh to occur first,
so we can no longer make this order check. The order really can't
ever change anyway--this was just a sanity check. So get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently, a watch on an rbd device header object gets torn down
when its final Linux device reference gets dropped. Instead, tear
it down when removing the device. If an error occurs cleaning up
the watch event when unmapping, abort the unmap request.
All images (including parents) still get watch requests set up, so
tear these down also, in rbd_dev_remove_parent(). For now, ignore
any errors that occur in this case.
Get rid of local variable "rc" in rbd_remove(); use "ret" instead
(they both somehow ended up defined in the function and only one is
needed).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function rbd_header_name(), which allocates and formats
the name of the header object for the rbd device.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Alex Elder