Commit Graph

17 Commits

Author SHA1 Message Date
Roland McGrath 380fdd7585 x86 ptrace: user-sets-TF nits
This closes some arcane holes in single-step handling that can arise
only when user programs set TF directly (via popf or sigreturn) and
then use vDSO (syscall/sysenter) system call entry.  In those entry
paths, the clear_TF_reenable case hits and we must check TIF_SINGLESTEP
to be sure our bookkeeping stays correct wrt the user's view of TF.

Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-16 12:15:17 -07:00
Roland McGrath 6718d0d6da x86 ptrace: block-step fix
The enable_single_step() logic bails out early if TF is already set.
That skips some of the bookkeeping that keeps things straight.
This makes PTRACE_SINGLEBLOCK break the behavior of a user task
that was already setting TF itself in user mode.

Fix the bookkeeping to notice the old TF setting as it should.

Test case at: http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/step-jump-cont-strict.c?cvsroot=systemtap

Signed-off-by: Roland McGrath <roland@redhat.com>
2008-07-16 12:15:16 -07:00
Jan Beulich 5b0e508415 x86: prevent unconditional writes to DebugCtl MSR
Otherwise, enabling (or better, subsequent disabling) of single
stepping would cause a kernel oops on CPUs not having this MSR.

The patch could have been added a conditional to the MSR write in
user_disable_single_step(), but centralizing the updates seems safer
and (looking forward) better manageable.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:58 +02:00
Roland McGrath 4ba51fd75c x86 ptrace: avoid unnecessary wrmsr
This avoids using wrmsr on MSR_IA32_DEBUGCTLMSR when it's not needed.
No wrmsr ever needs to be done if noone has ever used block stepping.

Without this change, using ptrace on 2.6.25 on an x86 KVM guest
will tickle KVM's missing support for the MSR and crash the guest
kernel.  Though host KVM is the buggy one, this makes for a regression
in the guest behavior from 2.6.24->2.6.25 that we can easily avoid.

I also corrected some bad whitespace.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-03 15:42:43 -07:00
Jan Beulich d032b31a3a x86: fix typo in step.c
TIF_DEBUGCTLMSR has no meaning in the actual MSR...

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-03-07 16:39:14 +01:00
Harvey Harrison f2857ce920 x86: remove last user of get_segment_eip
is_prefetch was the last user of get_segment_eip and only on
X86_32.  This function returned the faulting instruction's
address and set the upper segment limit.

Instead, use the convert_ip_to_linear helper and rely on
probe_kernel_address to do the segment checks which was
already done everywhere the segment limit was being checked
on X86_32.

Remove get_segment_eip as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
Harvey Harrison 37cd9cf3da x86: common x86_32|64 naming
Rename convert_rip_to_linear to convert_ip_to_linear for shared
X86_32|64 use.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
Harvey Harrison f13bd3e793 x86: use wrmsrl in kprobes.c, step.c
Where x86_32 passed zero in the high 32 bits, use wrmsrl which
will zero extend for us.  This allows ifdefs for 32/64 bit to
be eliminated.

Eliminate ifdef in step.c.  Similar cleanup was done when unifying
kprobes_32|64.c and wrmsr() was chosen there over wrmsrl().  This
patch changes these to wrmsrl.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:12 +01:00
Harvey Harrison 1379a5ce3f x86: move get_segment_eip() to step.c
get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context.  Move get_segment_eip to
step.c to allow easier consolidation.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:00 +01:00
Markus Metzger eee3af4a2c x86, ptrace: support for branch trace store(BTS)
Resend using different mail client

Changes to the last version:
- split implementation into two layers: ds/bts and ptrace
- renamed TIF's
- save/restore ds save area msr in __switch_to_xtra()
- make block-stepping only look at BTF bit

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:31:09 +01:00
H. Peter Anvin 65ea5b0349 x86: rename the struct pt_regs members for 32/64-bit consistency
We have a lot of code which differs only by the naming of specific
members of structures that contain registers.  In order to enable
additional unifications, this patch drops the e- or r- size prefix
from the register names in struct pt_regs, and drops the x- prefixes
for segment registers on the 32-bit side.

This patch also performs the equivalent renames in some additional
places that might be candidates for unification in the future.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:56 +01:00
Roland McGrath 10faa81e10 x86: debugctlmsr arch_has_block_step
This implements user-mode step-until-branch on x86 using the BTF bit
in MSR_IA32_DEBUGCTLMSR.  It's just like single-step, only less so.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:54 +01:00
Roland McGrath e1f287735c x86 single_step: TIF_FORCED_TF
This changes the single-step support to use a new thread_info flag
TIF_FORCED_TF instead of the PT_DTRACE flag in task_struct.ptrace.
This keeps arch implementation uses out of this non-arch field.

This changes the ptrace access to eflags to mask TF and maintain
the TIF_FORCED_TF flag directly if userland sets TF, instead of
relying on ptrace_signal_deliver.  The 64-bit and 32-bit kernels
are harmonized on this same behavior.  The ptrace_signal_deliver
approach works now, but this change makes the low-level register
access code reliable when called from different contexts than a
ptrace stop, which will be possible in the future.

The 64-bit do_debug exception handler is also changed not to clear TF
from user-mode registers.  This matches the 32-bit kernel's behavior.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:50 +01:00
Roland McGrath 7122ec8158 x86: single_step: share code
This removes the single-step code from ptrace_32.c and uses the step.c code
shared with the 64-bit kernel.  The two versions of the code were nearly
identical already, so the shared code has only a couple of simple #ifdef's.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:50 +01:00
Roland McGrath 5f76cb1f6c x86: single_step 0xf0
This fixes the 64-bit single-step handling code's instruction
decoder to grok the 0xf0 (lock) prefix, which the 32-bit code
already does correctly.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:50 +01:00
Roland McGrath 3f80c1adc9 x86: single_step segment macros
This cleans up the single-step code to use the asm/segment.h macros
for segment selector magic bits, rather than its own constant.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:50 +01:00
Roland McGrath fa1e03eae2 x86: single_step moved
This moves the single-step support code from ptrace_64.c into a new file
step.c, verbatim.  This paves the way for consolidating this code between
64-bit and 32-bit versions.

Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:30:50 +01:00