Commit Graph

897 Commits

Author SHA1 Message Date
Lars-Peter Clausen 883a1d49f0 ALSA: control: Make sure that id->index does not overflow
The ALSA control code expects that the range of assigned indices to a control is
continuous and does not overflow. Currently there are no checks to enforce this.
If a control with a overflowing index range is created that control becomes
effectively inaccessible and unremovable since snd_ctl_find_id() will not be
able to find it. This patch adds a check that makes sure that controls with a
overflowing index range can not be created.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:37 +02:00
Lars-Peter Clausen ac902c112d ALSA: control: Handle numid overflow
Each control gets automatically assigned its numids when the control is created.
The allocation is done by incrementing the numid by the amount of allocated
numids per allocation. This means that excessive creation and destruction of
controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to
eventually overflow. Currently when this happens for the control that caused the
overflow kctl->id.numid + kctl->count will also over flow causing it to be
smaller than kctl->id.numid. Most of the code assumes that this is something
that can not happen, so we need to make sure that it won't happen

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:23 +02:00
Lars-Peter Clausen fd9f26e4ec ALSA: control: Don't access controls outside of protected regions
A control that is visible on the card->controls list can be freed at any time.
This means we must not access any of its memory while not holding the
controls_rw_lock. Otherwise we risk a use after free access.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:13:07 +02:00
Lars-Peter Clausen 82262a4662 ALSA: control: Fix replacing user controls
There are two issues with the current implementation for replacing user
controls. The first is that the code does not check if the control is actually a
user control and neither does it check if the control is owned by the process
that tries to remove it. That allows userspace applications to remove arbitrary
controls, which can cause a user after free if a for example a driver does not
expect a control to be removed from under its feed.

The second issue is that on one hand when a control is replaced the
user_ctl_count limit is not checked and on the other hand the user_ctl_count is
increased (even though the number of user controls does not change). This allows
userspace, once the user_ctl_count limit as been reached, to repeatedly replace
a control until user_ctl_count overflows. Once that happens new controls can be
added effectively bypassing the user_ctl_count limit.

Both issues can be fixed by instead of open-coding the removal of the control
that is to be replaced to use snd_ctl_remove_user_ctl(). This function does
proper permission checks as well as decrements user_ctl_count after the control
has been removed.

Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at
beginning of the function if the control already exists is removed. This is not
a problem though since the check is quite useless, because the lock that is
protecting the control list is released between the check and before adding the
new control to the list, which means that it is possible that a different
control with the same settings is added to the list after the check. Luckily
there is another check that is done while holding the lock in snd_ctl_add(), so
we'll rely on that to make sure that the same control is not added twice.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:12:49 +02:00
Lars-Peter Clausen 07f4d9d74a ALSA: control: Protect user controls against concurrent access
The user-control put and get handlers as well as the tlv do not protect against
concurrent access from multiple threads. Since the state of the control is not
updated atomically it is possible that either two write operations or a write
and a read operation race against each other. Both can lead to arbitrary memory
disclosure. This patch introduces a new lock that protects user-controls from
concurrent access. Since applications typically access controls sequentially
than in parallel a single lock per card should be fine.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-18 15:12:33 +02:00
Thomas Gleixner 26204e048d ALSA: core: Use ktime_get_ts()
do_posix_clock_monotonic_gettime() is a leftover from the initial
posix timer implementation which maps to ktime_get_ts().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-12 12:58:16 +02:00
Adam Goode 27423257b7 ALSA: seq: Continue broadcasting events to ports if one of them fails
Sometimes PORT_EXIT messages are lost when a process is exiting.
This happens if you subscribe to the announce port with client A,
then subscribe to the announce port with client B, then kill client A.
Client B will not see the PORT_EXIT message because client A's port is
closing and is earlier in the announce port subscription list. The
for each loop will try to send the announcement to client A and fail,
then will stop trying to broadcast to other ports. Killing B works fine
since the announcement will already have gone to A. The CLIENT_EXIT
message does not get lost.

How to reproduce problem:

*** termA
$ aseqdump -p 0:1
  0:1   Port subscribed            0:1 -> 128:0

*** termB
$ aseqdump -p 0:1

*** termA
  0:1   Client start               client 129
  0:1   Port start                 129:0
  0:1   Port subscribed            0:1 -> 129:0

*** termB
  0:1   Port subscribed            0:1 -> 129:0

*** termA
^C

*** termB
  0:1   Client exit                client 128
   <--- expected Port exit as well (before client exit)

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 17:30:58 +02:00
Adam Goode 21fd3e956e ALSA: seq: correctly detect input buffer overflow
snd_seq_event_dup returns -ENOMEM in some buffer-full conditions,
but usually returns -EAGAIN. Make -EAGAIN trigger the overflow
condition in snd_seq_fifo_event_in so that the fifo is cleared
and -ENOSPC is returned to userspace as stated in the alsa-lib docs.

Signed-off-by: Adam Goode <agoode@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-04 07:12:12 +02:00
Takashi Iwai efd4b76ef7 Merge branch 'for-linus' into for-next
Just to catch up a few small fixes for HD-audio and DMA engine.
2014-06-03 08:15:18 +02:00
Tushar Behera 02fb05a598 ALSA: pcm_dmaengine: Add check during device suspend
Currently snd_dmaengine_pcm_trigger() calls dmaengine_pause()
unconditinally during device suspend. In case where DMA controller
doesn't support PAUSE/RESUME functionality, this call is not able
to stop the DMA controller. In this scenario, audio playback doesn't
resume after device resume.

Calling dmaengine_pause/dmaengine_terminate_all conditionally fixes
the issue.

It has been tested with audio playback on Samsung platform having
PL330 DMA controller which doesn't support PAUSE/RESUME.

Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-05-19 11:31:24 +02:00
Masanari Iida 53403a8013 ALSA: core: Fix format string mismatch in seq_midi.c
Fix format string mismatch in snd_seq_midisynth_register_port().
Argument type of p is unsigned int.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-28 12:18:47 +02:00
Tim Gardner 00d9015440 ALSA: pcm: 'BUG:' message unnecessarily triggers kerneloops
BugLink: http://bugs.launchpad.net/bugs/1305480

The kerneloops-daemon scans dmesg for common crash signatures, among
which is 'BUG:'. The message emitted by the PCM library is really a
warning, so the most expedient thing to do seems to be to change the
string.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-16 16:20:59 +02:00
Takashi Iwai 9ddd84f872 Merge branch 'for-next' into for-linus 2014-03-31 12:16:31 +02:00
Charles Keepax 749d32237b ALSA: compress: Pass through return value of open ops callback
The snd_compr_open function would always return 0 even if the compressed
ops open function failed, obviously this is incorrect. Looks like this
was introduced by a small typo in:

commit a0830dbd4e
ALSA: Add a reference counter to card instance

This patch returns the value from the compressed op as it should.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-19 15:46:24 +01:00
Takashi Iwai 5fdb83f190 ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
 exciting new features but welcome nontheless:
 
  - Lots of cleanups from Takashi for enumerations; the original API for
    these was error prone so he's refactored lots of code to use more
    modern APIs which avoid issues.
  - Elimination of the ASoC level wrappers for I2C and SPI moving us
    closer to converting to regmap completely and avoiding some
    randconfig hassle.
  - Provide both manually and transparently locked DAPM APIs rather than
    a mix of the two fixing some concurrency issues.
  - Start converting CODEC drivers to use separate bus interface drivers
    rather than having them all in one file helping avoid dependency
    issues.
  - DPCM support for Intel Haswell and Bay Trail platforms.
  - Lots of work on improvements for simple-card, DaVinci and the Renesas
    rcar drivers.
  - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
    CSR SiRF SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTIOhJAAoJELSic+t+oim90CoP/3CVTm9cWv1qhPSU6jjn6RJG
 /djmhntJfHd/GXo+0TiiwNK9WmZjFrJUr+5ofkDTCqSzFz1Suc90B6oHxY4dFbgF
 IyIpTexGwTLv3H6yDjadYAfmGDSsE9sM2dkID9oXy6aEzjNby/a1VEiBnRgx16X1
 YGvMVK8AGFn/AyC/zOV6EcKJxUjdDogqZ5wkR2XHzwDoYjl9ufxK9BnSIygYABOW
 ABAjyrZf3xx97AH82BB6iqcZMh5GxGNTvI3hQd/vjx0r7RFUDNLqmF2cPZAMTRW/
 bXWxVmtNHie1+lCldyMFm8pV/Pv09zuqDAQKbPY2TeHj2zF8CM548NlkFHqwHlp0
 S9K5E1N+/2wcXMjQa1wBELohUdl6dVh1OFOAz7M8o0TJdSOZyR6PJ9r0NprP8NgS
 67FBU+ZqnWIK159m9rKkFfPhnaDuDzk+rpwyK0fQxQgpdGGjLyv7OK3GhS30oTnA
 Z2GjEyUySM1BcEEWAtfUD5fHbjN28e1Icn53q5q4JK4gvx4DXBy08uY/vumvjXjO
 8oum3q3RjRvqIhzMrJoVgs+c8RHwS/bZQhlu9Q3qNTsDNDyMnaZWHFAnP8RDqHjv
 ojZiMJkJdpqceZ3z1k5ZG8GWJ2JaZBikSbeNk2Ltg17/0nackq2r8ekrIoEUPVk2
 ph4DJNC2s1qCFtx7tzQj
 =C5oo
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.
2014-03-13 09:53:25 +01:00
Takashi Iwai 6776a5d712 ALSA: Move EXPORT_SYMBOL() in appropriate places
Just a cleanup to follow the standard coding style.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-27 16:00:51 +01:00
Takashi Iwai 72620d6048 ALSA: Clean up snd_device_*() codes
A few code cleanups and optimizations.  In addition, drop
snd_device_disconnect() that isn't used at all, and drop the return
values from snd_device_free*().

Another slight difference by this change is that now the device state
will become always SNDRV_DEV_REGISTERED no matter whether dev_register
ops is present or not.  It's for better consistency.  There should be
no impact for the current tree, as the state isn't checked.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:52 +01:00
Takashi Iwai 289ca025ee ALSA: Use priority list for managing device list
Basically, the device type specifies the priority of the device to be
registered / freed, too.  However, the priority value isn't well
utilized but only it's checked as a group.  This results in
inconsistent register and free order (where each of them should be in
reversed direction).

This patch simplifies the device list management code by simply
inserting a list entry at creation time in an incremental order for
the priority value.  Since we can just follow the link for register,
disconnect and free calls, we don't have to specify the group; so the
whole enum definitions are also simplified as well.

The visible change to outside is that the priorities of some object
types are revisited.  For example, now the SNDRV_DEV_LOWLEVEL object
is registered before others (control, PCM, etc) and, in return,
released after others.  Similarly, SNDRV_DEV_CODEC is in a lower
priority than SNDRV_DEV_BUS for ensuring the dependency.

Also, the unused SNDRV_DEV_TOPLEVEL, SNDRV_DEV_LOWLEVEL_PRE and
SNDRV_DEV_LOWLEVEL_NORMAL are removed as a cleanup.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:51 +01:00
Takashi Iwai 71e2e1c147 ALSA: hwdep: Allow to assign the given parent
Just like PCM, allow hwdep to be assigned to a different parent device
than the card.  It'll be used for the HD-audio codec device in the
later patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:50 +01:00
Takashi Iwai f806bdb2f7 ALSA: hwdep: Take private_data as drvdata for sysfs
For referring to a different object from sysfs ops, take hwdep
private_data as stored via dev_set_drvdata() at creating the device
object.  In that way, the same sysfs ops can be used by different
device types.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:50 +01:00
Takashi Iwai caa751bad4 ALSA: Create sysfs attribute files via groups
Instead of calling each time device_create_file(), create the groups
of sysfs attribute files at once in a normal way.  Add a new helper
function, snd_get_device(), to return the associated device object,
so that we can handle the sysfs addition locally.

Since the sysfs file addition is done differently now,
snd_add_device_sysfs_file() helper function is removed.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25 12:12:49 +01:00
Mark Brown 63a5d4c6a7 ALSA: Export snd_pcm_constraint_mask64()
Allow modules to use it, fixing a build failure when the newly added
ADAU1977 driver is built as a module.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
2014-02-20 17:42:59 +09:00
Takashi Iwai b203dbab08 ALSA: core: Fix missing card sysfs contents
While moving the card device into struct snd_card, the reference to
the assigned card in sysfs show/store callbacks were forgotten to be
refreshed, still accessing to the no longer used drvdata.  Fix these
places to refer correctly via container_of().

Also, remove the superfluous NULL checks since it's guaranteed to be
non-NULL now.

Fixes: 8bfb181c17 ('ALSA: Embed card device into struct snd_card')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19 11:20:32 +01:00
Takashi Iwai 9ce5054363 ALSA: Drop __bitwise and typedefs for snd_device attributes
Using __bitwise and typedefs for the attributes of snd_device struct
isn't so useful, and rather it worsens the readability.  Let's drop
them and use the straightforward enum.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:20:24 +01:00
Takashi Iwai bb343e7969 ALSA: seq_oss: Use standard printk helpers
Use the standard pr_xxx() helpers instead of home-baked snd_print*().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:18 +01:00
Takashi Iwai 04cc79a048 ALSA: seq: Use standard printk helpers
Use the standard pr_xxx() helpers instead of home-baked snd_print*().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:18 +01:00
Takashi Iwai cf74dcf351 ALSA: timer: Use standard printk helpers
Use the standard pr_xxx() helpers instead of home-baked snd_print*().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:17 +01:00
Takashi Iwai 61efcee860 ALSA: oss: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:17 +01:00
Takashi Iwai 2ebef69fc5 ALSA: hwdep: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:16 +01:00
Takashi Iwai ca20d29275 ALSA: rawmidi: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:16 +01:00
Takashi Iwai f2f9307a4f ALSA: core: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:15 +01:00
Takashi Iwai 09e56df8b3 ALSA: pcm: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

For simplicity, introduce new helpers for pcm stream, pcm_err(), etc.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:15 +01:00
Takashi Iwai bb00945749 ALSA: control: Use standard printk helpers
Use dev_err() & co as much as possible.  If not available (no device
assigned at the calling point), use pr_xxx() helpers instead.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:14 +01:00
Takashi Iwai a67ca25b6c ALSA: seq_oss: Drop debug prints
The debug prints in snd-seq-oss module are rather useless.
Let's clean up before further modifications.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:13 +01:00
Takashi Iwai f246406481 ALSA: Use standard device refcount for card accounting
Drop the own refcount but use the standard device refcounting via
get_device() and put_device().  Introduce a new completion to snd_card
instead of the wait queue for syncing the last release, which is used
in snd_card_free().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:13 +01:00
Takashi Iwai 34356dbdb6 ALSA: Use static groups for id and number card sysfs attr files
... instead of calling device_create_file() manually.
No functional change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:12 +01:00
Takashi Iwai 8bfb181c17 ALSA: Embed card device into struct snd_card
As prepared in the previous patch, we are ready to create a device
struct for the card object in snd_card_create() now.  This patch
changes the scheme from the old style to:

- embed a device struct for the card object into snd_card struct,
- initialize the card device in snd_card_create() (but not register),
- registration is done in snd_card_register() via device_add()

The actual card device is stored in card->card_dev.  The card->dev
pointer is kept unchanged and pointing to the parent device as before
for compatibility reason.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-14 08:14:12 +01:00
Takashi Iwai 393aa9c1cc ALSA: Mandate to pass a device pointer at card creation time
This is a part of preliminary works for modernizing the ALSA device
structure.  So far, we set card->dev at later point after the object
creation.  Because of this, the core layer doesn't always know which
device is being handled before it's actually registered, and it makes
impossible to show the device in error messages, for example.  The
first goal is to achieve a proper struct device initialization at the
very beginning of probing.

As a first step, this patch introduces snd_card_new() function (yes
there was the same named function in the very past), in order to
receive the parent device pointer from the very beginning.
snd_card_create() is marked as deprecated.

At this point, there is no functional change other than that.  The
actual change of the device creation scheme will follow later.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12 10:58:20 +01:00
Takashi Iwai 80d7d771ae ALSA: Drop unused name argument in snd_register_oss_device()
The last argument, name, of snd_oss_register_device() is nowhere
referred in the function in the current code.  Let's drop it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12 10:58:19 +01:00
Takashi Iwai 8eeaa2f9e0 ALSA: Replace with IS_ENABLED()
Replace the lengthy #if defined(XXX) || defined(XXX_MODULE) with the
new IS_ENABLED() macro.

The patch still doesn't cover all ifdefs.  For example, the dependency
on CONFIG_GAMEPORT is still open-coded because this also has an extra
dependency on MODULE.  Similarly, an open-coded ifdef in pcm_oss.c and
some sequencer-related stuff are left untouched.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-10 11:42:00 +01:00
Masanari Iida 0a11458cbb ALSA: Fix typos in alsa-driver-api.xml
This patch fixed 2 typos in DocBook/alsa-driver-api.xml.
It is because this file is generated by make xmldocs,
I have to fix typos within source files.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-10 09:47:08 +01:00
Takashi Iwai deb6596f16 ALSA: Refactor slot assignment code
There are two loops that are almost identical but only with different
checks.  Refactor them with a simple helper, and give a bit more
comments what's doing there.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23 11:45:24 +01:00
Dan Carpenter 4c3773eda4 ALSA: bits vs bytes bug in snd_card_create()
The test here is intended intended to prevent shift wrapping bugs when
we do "1U << idx2".  We should consider the number of bits in a u32
instead of the number of bytes.

[fix another chunk similarly by tiwai]

Fixes: 7bb2491b35 ('ALSA: Add kconfig to specify the max card numbers')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-23 10:50:36 +01:00
Mark Brown 2f43a23ab9 Merge remote-tracking branch 'asoc/topic/pcm' into for-tiwai 2014-01-16 12:42:57 +00:00
Lars-Peter Clausen e3a9269f87 ALSA: Add helper function for intersecting two rate masks
A bit of special care is necessary when creating the intersection of two rate
masks. This comes from the special meaning of the SNDRV_PCM_RATE_CONTINUOUS and
SNDRV_PCM_RATE_KNOT bits, which needs special handling when intersecting two
rate masks. SNDRV_PCM_RATE_CONTINUOUS means the hardware supports all rates in a
specific interval. SNDRV_PCM_RATE_KNOT means the hardware supports a set of
discrete rates specified by a list constraint. For all other cases the supported
rates are specified directly in the rate mask.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-14 20:42:34 +00:00
Takashi Iwai 6ab08ced64 ALSA: PCM: Warn when buffer preallocation fails
The failures of buffer preallocations at driver initializations aren't
critical but it's still helpful to inform, so that user can know that
something doesn't work as expected.

For example, the recent page allocator change triggered regressions,
but developers didn't notice until recently because the driver didn't
complain.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-11 11:04:23 +01:00
Takashi Iwai 2d82ea2005 ALSA: Merge memalloc code into snd-pcm module
Instead of keeping a separate snd-page-alloc module, merge into the
core snd-pcm module, as we don't need to keep it as an individual
module due to the drop of page reservation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-09 08:12:57 +01:00
Takashi Iwai f5d8e6df4b ALSA: Remove superfluous header inclusions in memalloc.c
After cutting off the proc and page reservation codes, we don't need
many headers any longer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-09 07:44:11 +01:00
Takashi Iwai 47d98c026e ALSA: Remove memory reservation code from memalloc helper
Nowadays we have CMA for obtaining the contiguous memory pages
efficiently.  Let's kill the old kludge for reserving the memory pages
for large buffers.  It was rarely useful (only for preserving pages
among module reloading or a little help by an early boot scripting),
used only by a couple of drivers, and yet it gives too much ugliness
than its benefit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-09 07:32:10 +01:00
Takashi Iwai d7b135410e ALSA: Remove memory accounting in memalloc helper
It's almost superfluous, and doesn't help much for real uses.
Let's reduce the layer size.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-09 07:32:05 +01:00