Commit Graph

60 Commits

Author SHA1 Message Date
Paul Gortmaker da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Clemens Ladisch dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Takashi Iwai 934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Clemens Ladisch a1f80fcfd5 ALSA: oxygen: do not show chip revision in card longname
Apparently, the revision is 2 on all sold sound cards, so this
information is not actually useful.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:47:24 +01:00
Clemens Ladisch 5b8bf2a54f ALSA: oxygen: simplify model-specific MCLK handling
Replace the get_i2s_mclk callback with tables of MCLK values.  This
simplifies the MCLK-handling code in both the framework and the model-
specific drivers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-01-10 16:46:31 +01:00
Takashi Iwai 354d14b3f5 Merge branch 'topic/workq-update' into topic/misc 2010-12-13 09:29:52 +01:00
Tejun Heo 5b84ba26a9 sound: don't use flush_scheduled_work()
flush_scheduled_work() is deprecated and scheduled to be removed.

* cancel[_delayed]_work() + flush_scheduled_work() ->
  cancel[_delayed]_work_sync().

* wm8350, wm8753 and soc-core use custom code to cancel a delayed
  work, execute it immediately if it was pending and wait for its
  completion.  This is equivalent to flush_delayed_work_sync().  Use
  it instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-13 09:22:44 +01:00
Clemens Ladisch e2943efa4f ALSA: oxygen: show correct package ID
Instead of the hardcoded "CMI8788", show the actual chip name.

Note: This is neither what the chip is (it's always the same),
      nor what the chip is actually called.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:34 +01:00
Clemens Ladisch 9719fcaa6a ALSA: oxygen: allow to dump codec registers
To help with debugging, add the registers of the model-specific
codecs to the controller and AC97 register dump in the proc file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-12-06 14:48:15 +01:00
Clemens Ladisch 31f86bacfc ALSA: oxygen: add Kuroutoshikou CMI8787-HG2PCI support
Add support for the Kuroutoshikou CMI8787-HG2PCI sound card.

[replaced non-latin letters in the patch by tiwai]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-11-03 08:26:13 +01:00
Clemens Ladisch ebebeece4b ALSA: oxygen: add PEX8111 initialization
Configure the PEX8111 bridge on the PCI Express cards so that the audio
DMA controller can do proper burst reads and is less likely to lose
data.  This is usually done automatically, but is required on older
cards where the user has not applied the PLX firmware update.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:18 +02:00
Clemens Ladisch 7cb4ced5aa ALSA: oxygen: rewrite PCIe bridge initialization
Change the PCIe/PCI bridge initialization code to configure only the
bridge that is actually connected to the sound chip, instead of any
bridge found in the system.  The new code also makes it easier to add
other bridges.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-06 16:27:12 +02:00
Clemens Ladisch 4c25b93223 ALSA: virtuoso: work around missing reset in the Xonar DS Windows driver
For the WM8776 chip, this driver uses a different sample format and
more features than the Windows driver.  When rebooting from Linux into
Windows, the latter driver does not reset the chip but assumes all its
registers have their default settings, so we get garbled sound or, if
the output happened to be muted before rebooting, no sound.

To make that driver happy, hook our driver's cleanup function into the
shutdown notifier and ensure that the chip gets reset.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Nathan Schagen
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-08 08:26:13 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Clemens Ladisch 362bc24d67 sound: oxygen: fix for PI7C9X110 compatibility
If the card is used with a Pericom PI7C9X110 PCI-E/PCI bridge,
reconfigure the latter's PCI buffering to fix an unknown problem.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:30 +02:00
Clemens Ladisch 87b61902ce sound: oxygen: do not try to restore nonexistent EEPROM
On cards where the EEPROM was deliberately omitted, we do not need to
try to restore the EEPROM's contents.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-28 11:53:21 +02:00
Clemens Ladisch 92653453c3 sound: oxygen: handle cards with missing EEPROM
The card model detection code introduced in 2.6.30 that tries to work
around partially broken EEPROM contents by reading the EEPROM directly
does not handle cards where the EEPROM has been omitted.  In this case,
we have to use the default ID to allow the driver to load.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Ozan Çağlayan <ozan@pardus.org.tr>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-03 07:38:06 +02:00
Clemens Ladisch 82af308f65 sound: oxygen: zero-initialize model data
Model drivers assume that model_data is zeroed, so we better use
kzalloc() (like we did before when it was allocated together with the
card structure).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-27 17:32:21 +01:00
Clemens Ladisch 1275d6f608 sound: oxygen: automatically restore overwritten EEPROM
If the EEPROM was partially overwritten (which seems to happen before the OS is
booted), restore its entire contents by deducing it from the remaining
information.

This does not have any effect on the Linux driver, which works even with
incomplete information in the EEPROM, but it makes other drivers work again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:26 +01:00
Clemens Ladisch 30459d7b18 sound: oxygen: handle cards with broken EEPROM
Under as yet unknown circumstances, the first word of the sound card's
EEPROM gets overwritten.  When this has happened, we cannot rely on the
subsystem IDs that the kernel reads from the PCI configuration
registers.  Instead, we read the IDs directly from the EEPROM and do the
ID matching manually.

Because the model-specific driver cannot determine the model before
calling oxygen_pci_probe(), that function now gets a get_model()
callback as parameter.  The customizing of the model structure, which
was formerly done by the probe() callback, also has moved into
get_model().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:25 +01:00
Clemens Ladisch a69bb3c3fe sound: oxygen: use static driver name
When allocating resources, use a fixed name instead of reading it from
the model structure.  This allows us to allocate the resources before
the actual model is known.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:24 +01:00
Clemens Ladisch 6ed9115709 sound: oxygen: allocate model_data dynamically
Allocate the model-specific data dynamically instead of including it in
the memory block of the card structure.  This will allow us to determine
the actual model after the card creation.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:23 +01:00
Clemens Ladisch bb71858853 sound: oxygen: make the owner module a parameter of the probe function
Move the owner field out of the oxygen_model structure and make it
a parameter of oxygen_pci_probe(), because the actual owner module does
not depend on the card model.  Furthermore, moving it out of the model
structure allows us to create the card structure before the actual model
is known.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-19 10:22:22 +01:00
Takashi Iwai e58de7baf7 ALSA: Convert to snd_card_create() in sound/pci/*
Convert from snd_card_new() to the new snd_card_create() function
in sound/pci/*.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:20:55 +01:00
Clemens Ladisch 397b1dcc44 ALSA: oxygen: add UART I/O functions
Add functions to allow model drivers to communicate with external chips
by doing I/O with the not-used-for-MIDI UART.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:04:43 +02:00
Clemens Ladisch dbbbd67444 ALSA: oxygen: configure MIDI via device_config
To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags.  This allows model drivers to
enable the UART without creating an ALSA MIDI device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:03:42 +02:00
Clemens Ladisch d76596b1ee ALSA: oxygen: rename pcm_dev_cfg
Rename the pcm_dev_cfg field to device_config because there will be
additional flags that do not describe PCM devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 09:02:08 +02:00
Clemens Ladisch 568c59e722 ALSA: oxygen: add probe callback
Add a probe callback to the model structure so that model-specific
drivers can refine their model detection before the card is initialized.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 08:56:01 +02:00
Clemens Ladisch 9bd6a73aef ALSA: oxygen: use a copy of the model struct
Put a copy of the model structure into the chip structure so that model-
specific drivers can modify it depending on a particular device
instance.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2008-09-22 08:55:19 +02:00
Clemens Ladisch 4a4bc53bc5 [ALSA] oxygen: add PM support
Add suspend/resume support.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:17 +02:00
Clemens Ladisch c13650079b [ALSA] oxygen: add symbol for I/O space size
Remove another magic number - add a symbol for the size of the PCI I/O
range.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Clemens Ladisch d023dc0aa2 [ALSA] oxygen: fix version in MODULE_LICENSE
Adjust the MODULE_LICENSE strings to properly reflect the actual license.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-05-19 13:19:15 +02:00
Jeff Garzik f000fd8093 [ALSA] Fix synchronize_irq() bugs, redundancies
free_irq() calls synchronize_irq() for you, so there is no need for
drivers to manually do the same thing (again).  Thus, calls where
sync-irq immediately precedes free-irq can be simplified.

However, during this audit several bugs were noticed, where free-irq is
preceded by a "irq >= 0" check... but the sync-irq call is not covered
by the same check.

So, where sync-irq could not be eliminated completely, the missing check
was added.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:40 +02:00
Clemens Ladisch e983532e44 [ALSA] oxygen: mute by default
Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:37 +02:00
Clemens Ladisch 193e813814 [ALSA] oxygen: generalize handling of DAC volume limits
Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:36 +02:00
Clemens Ladisch 1d98c7d4be [ALSA] oxygen: use SPDIF input only if present
If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:32 +02:00
Clemens Ladisch e97f79994a [ALSA] oxygen: fix line-in recording selection (now for real)
On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:30 +02:00
Clemens Ladisch 43dd89c7e7 [ALSA] oxygen: disable clock of unused I2S inputs
Disable the master clock outputs of any unused I2S inputs.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch db12b8e301 [ALSA] oxygen: move MIDI flag to model struct
Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch 87eedd2fd4 [ALSA] oxygen: make SPI/2-wire configuration model-specific
Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:28 +02:00
Clemens Ladisch fa5d8106cb [ALSA] oxygen: add monitor controls
Add controls to enable monitoring of the analog and digital inputs.

To allow monitoring after loading the driver when nothing has been
played back or recorded yet, the I2S input and outputs are initialized
to a valid configuration.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:27 +02:00
Takashi Iwai f007dc045a [ALSA] oxygen - Fix section mismatch
Removed invalid __devinit and __devexit that are remaining after
split to a helper module.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22 14:20:08 -08:00
Clemens Ladisch 7c0141591f [ALSA] virtuoso: monitor external power on D2X
On the Xonar D2X, monitor the GPIO pin that indicates whether external
power is present.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:18 +01:00
Clemens Ladisch a360156049 [ALSA] oxygen: add front panel controls
Add mixer controls for the front panel AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch 1e821dd276 [ALSA] oxygen: use AC97 interrupt
After an AC97 register read or write, use the AC97 interrupt instead of
polling to wait for the access to be completed.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch 911b499af4 [ALSA] oxygen: make line-in exclusive only on Xonar
Move the line input switching code to the Virtuoso driver because only
the Xonar cards bypass the analog mixer for line input.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:17 +01:00
Clemens Ladisch b78e3dbb04 [ALSA] oxygen: more initialization
Initialize more registers of the controller and the second AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:15 +01:00
Clemens Ladisch 7f0b89465b [ALSA] oxygen: add 192 kHz SPDIF input support
Change the oxygen_spdif_input_bits_changed() function so that clock
changes on the SPDIF input are correctly detected.  This means that
sample rates greater than 96 kHz are now supported.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch 7ef37cd954 [ALSA] oxygen: move model-specific data out of common header
Instead of having model-specific fields in the common struct oxygen, put
them into a private structure that is allocated together with the card
structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:08 +01:00
Clemens Ladisch 878ac3ee76 [ALSA] oxygen: add more symbols
Add symbol definitions for the various codecs and GPIO pins.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:30:07 +01:00