Commit Graph

3160 Commits

Author SHA1 Message Date
Bill Pemberton 58b45d166f Input: serio - remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24 00:03:39 -08:00
Dmitry Torokhov 5e7fe820fa Merge branch 'for-linus' into next
Bring in changes to ads7846 to avoid mereg conflicts.
2012-11-24 00:02:54 -08:00
Vipul Kumar Samar 037db524a2 Input: stmpe-ts - add DT support for stmpe touchscreen
This patch allows the STMPE Touchscreen driver to be successfully probed and
initialised when Device Tree support is enabled. Bindings are mentioned in
Documentation too.

Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-22 23:47:09 -08:00
Ping Cheng edbe265d24 Input: wacom - add support for a new MT device (0x4001)
It supports 10 fingers.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21 13:22:10 -08:00
Ping Cheng 2ad5169c76 Input: wacom - simplify type check for newer V5 devices
The updated type enum enables this implementation.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21 13:22:06 -08:00
Igor Grinberg c4f4925439 Input: ads7846 - enable pendown GPIO debounce time setting
Some platforms need the pendown GPIO debounce time setting programmed.
Since the pendown GPIO is handled by the driver, the debounce time
should also be handled along with the pendown GPIO request.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21 13:09:56 -08:00
AnilKumar Ch 4a83eecff6 Input: matrix-keypad - add device tree support
Also the driver was modifued to take advantage of recent improvements in
matrix_keypad_build_keymap() implementation, which automatically allocates
memory for keymap.

The driver was tested on AM335x EVM.

Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-20 22:55:10 -08:00
Dmitry Torokhov c91cb7a75e Input: mousedev - move /dev/input/mice to the correct minor
When doing conversion to dynamic input numbers I inadvertently moved
/dev/input/mice from c,13,63 to c,13,31. We need to fix this so that
setups with statically populated /dev continue working.

Tested-by: Krzysztof Mazur <krzysiek@podlesie.net>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-18 23:15:16 -08:00
Dmitry Torokhov 5383116b86 Input: marix-keymap - automatically allocate memory for keymap
In device tree enabled setups requiring preallocated memory for storing keymap
is quite often awkward, so let's provide an option of allocating it directly
in matrix_keypad_build_keymap().

Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-14 08:35:07 -08:00
Aaro Koskinen 544a46c917 Input: add Retu power button driver.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 01:02:09 -08:00
Rolf Eike Beer 71a129fb61 Input: HIL - remove one goto
This goto is only used to skip the next instruction, which can easily be done
without a goto.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 01:02:03 -08:00
Henrik Rydberg 40a812044a Input: MT - document new 'flags' argument of input_mt_init_slots()
Fixes new kernel-doc warning in input-mt.c:

Warning(drivers/input/input-mt.c:38): No description found for parameter
'flags'

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:39:47 -08:00
Vipul Kumar Samar b8d52e2b9f Input: stmpe-ts - initialize the phys field in input device
Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:31:03 -08:00
Viresh Kumar 2bd942f90a Input: stmpe-ts - switch to using managed resources
This patch frees stmpe-ts driver from burden of freeing resources :)
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:30:48 -08:00
Viresh Kumar aaa4f2a7f6 Input: stmpe-keyboard - switch to using managed resources
This patch frees stmpe-keyboard driver from burden of freeing resources :)
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:30:33 -08:00
Viresh Kumar 6102752eb3 Input: spear-keyboard - switch to using managed resources
This patch frees spear-keyboard driver from burden of freeing resources :)
devm_* derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:29:55 -08:00
Deepak Sikri 1eee4af30e Input: spear-keyboard - fix for balancing the enable_irq_wake
This patch handles the fix for unbalanced irq for the cases when
enable_irq_wake fails, and a warning related to same is displayed
on the console. The workaround is handled at the driver level.

Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:29:39 -08:00
Ulf Hansson d852f95973 Input: nomadik-ske-keypad - start using the apb_pclk
Previously this clock was handled internally by the clockdriver,
but now this is separate clk. So we need take care of it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10 00:28:46 -08:00
Ulf Hansson 4e99aab78a Input: nomadik-ske-keypad - fixup use of clk
Do proper error handling for clk and make sure clocks are being
prepared|unprepared as well as enabled|disabled.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08 09:13:06 -08:00
Ping Cheng 6afdc289c9 Input: wacom - add support for 2 new multi-touch tablets (0x100 and 0x101)
This adds support for the two new multi-touch tablets.

Signed-off-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08 09:12:46 -08:00
Ping Cheng 3699dd7e16 Input: wacom - clean up device type code
Use switch instead of if statement to verify device types

Signed-off-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08 09:12:29 -08:00
Dmitry Torokhov 2be975c6d9 Input: introduce managed input devices (add devres support)
There is a demand from driver's writers to use managed devices framework
for their drivers. Unfortunately up to this moment input devices did not
provide support for managed devices and that lead to mixing two styles
of resource management which usually introduced more bugs, such as
manually unregistering input device but relying in devres to free
interrupt handler which (unless device is properly shut off) can cause
ISR to reference already freed memory.

This change introduces devm_input_allocate_device() that will allocate
managed instance of input device so that driver writers who prefer
using devm_* framework do not have to mix 2 styles.

Reviewed-by: Henrik Rydberg <rydberg@euromail.se>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08 09:10:05 -08:00
Dmitry Torokhov fa8e2458ec Linux 3.7-rc4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQlr0MAAoJEHm+PkMAQRiGLVQH/171fUorGn+u2k7dNhSWJXHB
 pPy6MbZhuBWepgRZGS0ffiC5tBvQaf9iK9Fh/9aqrDDw2aELk0CLPqQcfAUF/Jzf
 USPdBSIMNikgZtlWhabxuj/zKdaw8UuiJpCf3rMyIRmjQgmZyw/53TEqF54xTv0I
 Y4Y21vTSVXilQwvwYvcsCEBFrTZqXjLWQ60Hk+QRS9GV7a9m2LFcdiPOtRv17gbd
 CBDuiMHN9R04l2bB+5WHHsu+TNNf5uy3wAgEskDTftneXWjW44R4UR8O0rQh1ezQ
 Pa5WpCyJRRG8UOtPKTS6LEbljBwLLIoVI2JRoJrWoy3OkT63wyowFXyLGWCCrHY=
 =qAGi
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc4' into next to sync up Wacom bits

Linux 3.7-rc4
2012-11-08 08:51:52 -08:00
Sascha Hauer d56a289be2 Input: pwm-beeper - add devicetree probing support
A very simple binding, the only property is the phandle to the PWM.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-03 12:14:56 -07:00
Linus Torvalds 74fb838cd4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
 "Just a few driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: tsc40 - remove wrong announcement of pressure support
  Input: lpc32xx-keys - select INPUT_MATRIXKMAP
  Input: pxa27x_keypad - clear pending interrupts on keypad config
  Input: wacom - correct bad Cintiq 24HD check
  Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD
  Input: egalax_ts - get gpio from devicetree
2012-11-02 16:11:15 -07:00
Linus Torvalds 66b6a0c979 Bug-fixes:
* Use appropriate macros instead of hand-rolling our own (ARM).
  * Fixes if FB/KBD closed unexpectedly.
  * Fix memory leak in /dev/gntdev ioctl calls.
  * Fix overflow check in xenbus_file_write.
  * Document cleanup.
  * Performance optimization when migrating guests.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJQk9ngAAoJEFjIrFwIi8fJXOcH/jEmTaV2rbUCCnnivlQGj5B2
 AAXt03MM2F7Ohifo8IEHDhvJlUqQnglQq4wcku/8X/bqSkxtqJMfa/UAStmS2e6r
 605msiMws/GKiDPgKywWHjMPk7JJow/T7du9mpT2Swla12+DXc7e0P6Sqm6qGtB5
 tCBFYe3CS+j8Xi/siPhveAoLoDVmC8RpNzV8EWBdUKhNeD6U4s5M3+ChVexOrB/6
 43YkzurkY/FOsP+8YhNnKFSFrpYleRB1GdFcr8PN5mv85sNKts7vHCb4qJFzZdbk
 BMImdLrTUnKArE4y4FS0iqabOTGXaUplEXfyxDw5hweESGa1qzrd29ocyMQ5p/U=
 =LQxc
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bugfixes from Konrad Rzeszutek Wilk:
 - Use appropriate macros instead of hand-rolling our own (ARM).
 - Fixes if FB/KBD closed unexpectedly.
 - Fix memory leak in /dev/gntdev ioctl calls.
 - Fix overflow check in xenbus_file_write.
 - Document cleanup.
 - Performance optimization when migrating guests.

* tag 'stable/for-linus-3.7-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/mmu: Use Xen specific TLB flush instead of the generic one.
  xen/arm: use the __HVC macro
  xen/xenbus: fix overflow check in xenbus_file_write()
  xen-kbdfront: handle backend CLOSED without CLOSING
  xen-fbfront: handle backend CLOSED without CLOSING
  xen/gntdev: don't leak memory from IOCTL_GNTDEV_MAP_GRANT_REF
  x86: remove obsolete comment from asm/xen/hypervisor.h
2012-11-02 13:26:11 -07:00
Linus Torvalds 296bac30f6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
 "This contains fixes for two devices by Jiri Slaby and Xianhan Yu, new
  device IDs for MacBook Pro 10,2 from Dirk Hohndel and generic
  multitouch code fix from Alan Cox."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for the MacBook Pro 10,2 keyboard / touchpad
  HID: multitouch: fix maxcontacts problem on GeneralTouch
  HID: multitouch: put the case in the right switch statement
  HID: microsoft: fix invalid rdesc for 3k kbd
2012-10-31 15:39:28 -07:00
Dirk Hohndel 8d80da90f5 HID: Add support for the MacBook Pro 10,2 keyboard / touchpad
This enables the existing drivers for keyboard and touchpad with the new
USB IDs found on the MBP 13" Reasonable Resolution (also known as the
Retina Display).

Added entries to both keyboard and mouse ignore lists.

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-31 10:42:33 +01:00
Rolf Eike Beer 32ed1911fc Input: tsc40 - remove wrong announcement of pressure support
The tsc40 driver announces it supports the pressure event, but will never
send one. The announcement will cause tslib to wait for such events and
sending all touch events with a pressure of 0. Removing the announcement
will make tslib fall back to emulating the pressure on touch events so
everything works as expected.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 23:40:07 -07:00
David Vrabel 2ebb939ab9 xen-kbdfront: handle backend CLOSED without CLOSING
Backend drivers shouldn't transistion to CLOSED unless the frontend is
CLOSED.  If a backend does transition to CLOSED too soon then the
frontend may not see the CLOSING state and will not properly shutdown.

So, treat an unexpected backend CLOSED state the same as CLOSING.

Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-10-30 09:29:07 -04:00
Ashish Jangam 8ed2757edd Input: add DA9055 Onkey driver
This is the ONKEY driver of the Dialog DA9055 PMIC and depends on the
DA9055 MFD core driver.

This driver was functionally tested on SMDK6410 board.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:47:09 -07:00
Andy Shevchenko 3b11292381 Input: ALPS - print small buffers via %*ph
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:47:04 -07:00
Dmitry Torokhov 53279f36dc Linux 3.7-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQjYaSAAoJEHm+PkMAQRiGIlYH+wbwj7i5CcUG46VRFT5WlG7W
 iYaojL68FKKIUCBh4GOvZxE2D907KgqHQI6rePE/xDhK493d0Nyi4PGQJ1JoTE+l
 JQq++C3CoX9mm/zCRW5JyOcemE4t2t1/poi2ege9Kf9E9N5Cw0P4r8Cz1urCFKL6
 EO2/gA5d6cBQpg+gVq9T88SnYgiJGs7d8AYjFeC7SrqIwDvG6tfg+YF4IRxC4QAc
 0zbBgej/kbuiLbGl2ltU0I9HTOwlTgp53tdYe810cs3CdzNC2ykdF391Q24tloeo
 uxmCSQrA2upHA9aILqY+T5f+cMOpVS4T8Ica3N9OzVEIPXSh2K9d4tESGPikMEE=
 =yiDr
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc3' into next to sync up with recent USB and MFD changes
2012-10-30 00:20:56 -07:00
Roland Stigge e07577e1dd Input: lpc32xx-keys - select INPUT_MATRIXKMAP
This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP,
as the other drivers are doing in this regard. This fixes the following
compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not:

drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to
`matrix_keypad_build_keymap'

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:10:55 -07:00
Vasily Khoruzhick 904adede08 Input: pxa27x_keypad - clear pending interrupts on keypad config
Bootloader can leave interrupt bit pending, and it confuses driver.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:10:49 -07:00
Jason Gerecke b216e12d06 Input: wacom - correct bad Cintiq 24HD check
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30 00:10:29 -07:00
Dmitry Torokhov 68fe0f0a6d Linux 3.7-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQEcBAABAgAGBQJQjYaSAAoJEHm+PkMAQRiGIlYH+wbwj7i5CcUG46VRFT5WlG7W
 iYaojL68FKKIUCBh4GOvZxE2D907KgqHQI6rePE/xDhK493d0Nyi4PGQJ1JoTE+l
 JQq++C3CoX9mm/zCRW5JyOcemE4t2t1/poi2ege9Kf9E9N5Cw0P4r8Cz1urCFKL6
 EO2/gA5d6cBQpg+gVq9T88SnYgiJGs7d8AYjFeC7SrqIwDvG6tfg+YF4IRxC4QAc
 0zbBgej/kbuiLbGl2ltU0I9HTOwlTgp53tdYe810cs3CdzNC2ykdF391Q24tloeo
 uxmCSQrA2upHA9aILqY+T5f+cMOpVS4T8Ica3N9OzVEIPXSh2K9d4tESGPikMEE=
 =yiDr
 -----END PGP SIGNATURE-----

Merge tag 'v3.7-rc3' into for-linus to sync up with recent USB changes
2012-10-30 00:09:18 -07:00
Jason Gerecke b1e4279e4e Input: wacom - add touch sensor support for Cintiq 24HD touch
Decode multitouch reports from the touch sensor of the Cintiq 24HD
touch.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 16:02:36 -07:00
Jason Gerecke aea2bf6a57 Input: wacom - handle split-sensor devices with internal hubs
Like our other pen-and-touch products, the Cintiq 24HD touch needs data
to be shared between its two sensors to facilitate proximity-based palm
rejection.

Unlike other tablets that report sensor data through separate interfaces
of the same USB device, the Cintiq 24HD touch has separate USB devices
that are connected to an internal USB hub.

This patch makes it possible to designate the USB VID/PID of the other
device so that the two may share data.  To ensure we don't accidentally
link to a sensor from a physically separate device (if several have been
plugged in), we limit the search to siblings (i.e., devices directly
connected to the same hub).

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-25 16:02:36 -07:00
Jason Gerecke 88fd449e73 Input: wacom - add INPUT_PROP_DIRECT flag to Cintiq 24HD
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:41:31 -07:00
Hui Wang ae495e844a Input: egalax_ts - get gpio from devicetree
The irq_to_gpio() is old, most platforms use GENERIC_GPIO framework
and don't support this API anymore.

The i.MX6q sabrelite platform equips an egalax touchscreen controller,
and this platform already transfered to GENERIC_GPIO framework, to
support this driver, we use a more generic way to get gpio.

Add a return value checking for waking up the controller in the probe
function, this guarantee only a workable device can pass init.

[dmitry.torokhov@gmail.com: Make driver depend on CONFIG_OF as it is
 now required.]

Acked-by Zhang Jiejing <jiejing.zhang@freescale.com>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:38:22 -07:00
Javier Martin a6e8c0a253 Input: qt2160 - fix qt2160_write() implementation
The previous implementation of qt2160_write() didn't work properly because
the value was actually not written to the device. Probably nobody detected
this because the only write that was issued was the one related to auto
calibration.

In order to fix the problem use a similar aproach as qt1070 instead.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:13:47 -07:00
Kees Cook e52278a368 Input: remove CONFIG_EXPERIMENTAL from miscellaneous drivers
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:13:08 -07:00
Kees Cook 6828b4bb76 Input: remove CONFIG_EXPERIMENTAL from keyboard drivers
This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:12:23 -07:00
Dmitry Torokhov adc4633c86 Input: fix sparse warning in __input_release_device()
This fixes the following warning:
drivers/input/input.c:538:23: error: incompatible types in comparison expression (different address spaces)

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:12:01 -07:00
Dmitry Torokhov 5161870f51 Input: fix sparse warning in multitouch code
This fixes the following sparse warning:
drivers/input/input-mt.c:193:18: warning: Using plain integer as NULL pointer

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:11:52 -07:00
Dmitry Torokhov a4d6983c7a Input: arc_ps2 - switch to using managed resources
Using managed resources simplifies error handling and shrinks
size of arc_ps2_remove().

Tested-by: Mischa Jonker <mischa.jonker@synopsys.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25 00:11:07 -07:00
Mischa Jonker e4b2900946 Input: serio - add ARC PS/2 driver
This adds support for the PS/2 block that is used in various ARC FPGA
platforms.

Signed-off-by: Mischa Jonker <mischa.jonker@synopsys.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-22 22:48:32 -07:00
Dmitry Torokhov 4a215aade0 Input: fix use-after-free introduced with dynamic minor changes
Commit 7f8d4cad1e ("Input: extend the number of event (and other)
devices") made evdev, joydev and mousedev to embed struct cdev into
their respective structures representing input devices.

Unfortunately character device structure may outlive the parent
structure unless we do not set it up as parent of character device so
that it will stay pinned until character device is freed.

Also, now that parent structure is pinned while character device exists
we do not need to pin and unpin it every time user opens or closes it.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-22 08:50:37 +03:00
Wei Yongjun f6c0df6acb Input: edt-ft5x06 - convert to use simple_open()
This removes an open coded simple_open() function and
replaces file operations references to the function
with simple_open() instead.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-17 23:59:00 -07:00