Commit Graph

36 Commits

Author SHA1 Message Date
Dan Carpenter e902a358c7 drm/drm_crtc: return -EFAULT on copy_to_user errors
copy_from_user() returns the number of bytes left to be copied but we
want to return a negative error code here.  This is in the ioctl handler
so the error code get returned to userspace.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-06-08 09:33:35 +10:00
Dave Airlie 7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
Dave Airlie c9c2625ff4 Merge branch 'drm-edid-fixes' into drm-core-next
* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.
2010-04-20 13:14:38 +10:00
Dave Airlie 0b4c0f3f0e drm/kms/fb: separate fbdev connector list from core drm connectors
This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:28:01 +10:00
Dave Airlie 386516744b drm/fb: fix fbdev object model + cleanup properly.
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:21:03 +10:00
Adam Jackson 7466f4cc50 drm/edid: Remove arbitrary EDID extension limit
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:20 +10:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Linus Torvalds c07d7237a6 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits)
  drm/nv04: Fix set_operation software method.
  drm/nouveau: initialise DMA tracking parameters earlier
  drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
  drm/nv04: differentiate between nv04/nv05
  drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
  drm/nv50: prevent a possible ctxprog hang
  drm/nouveau: have ttm's fault handler called directly
  drm/nv50: restore correct cache1 get/put address on fifoctx load
  drm/nouveau: create function for "dealing" with gpu lockup
  drm/nouveau: remove unused nouveau_channel_idle() function
  drm/nouveau: fix handling of fbcon colours in 8bpp
  drm/nv04: Context switching fixes.
  drm/nouveau: Use the software object for fencing.
  drm/nouveau: Allocate a per-channel instance of NV_SW.
  drm/nv50: make the blocksize depend on vram size
  drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
  drm/nouveau: Don't skip card take down on nv0x.
  drm/nouveau: Implement nv42-nv43 TV load detection.
  drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
  drm/nv50: fix fillrect color
  ...
2010-01-11 09:46:20 -08:00
Alex Deucher 7970e677ac drm: Add eDP connector type
Add a new connector type for eDP (embedded displayport)

eDP is more or less the same as DP but there are some
cases when you might want to handle it separately.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:04:04 +10:00
Linus Torvalds 3ef884b4c0 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (189 commits)
  drm/radeon/kms: fix warning about cur_placement being uninitialised.
  drm/ttm: Print debug information on memory manager when eviction fails
  drm: Add memory manager debug function
  drm/radeon/kms: restore surface registers on resume.
  drm/radeon/kms/r600/r700: fallback gracefully on ucode failure
  drm/ttm: Initialize eviction placement in case the driver callback doesn't
  drm/radeon/kms: cleanup structure and module if initialization fails
  drm/radeon/kms: actualy set the eviction placements we choose
  drm/radeon/kms: Fix NULL ptr dereference
  drm/radeon/kms/avivo: add support for new pll selection algo
  drm/radeon/kms/avivo: fix some bugs in the display bandwidth setup
  drm/radeon/kms: fix return value from fence function.
  drm/radeon: Remove tests for -ERESTART from the TTM code.
  drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
  drm/radeon/kms: Convert radeon to new TTM validation API (V2)
  drm/ttm: Rework validation & memory space allocation (V3)
  drm: Add search/get functions to get a block in a specific range
  drm/radeon/kms: fix avivo tiling regression since radeon object rework
  drm/i915: Remove a debugging printk from hangcheck
  drm/radeon/kms: make sure i2c id matches
  ...
2009-12-10 21:56:47 -08:00
Dave Airlie 3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Jakob Bornecrantz 884840aa3c drm: Add dirty ioctl and property
This commit adds a ioctl and property to allow userspace
to notify the kernel that a framebuffer has changed. Instead
of snooping the command stream this allows finer grained
tracking of which areas have changed.

The primary user for this functionality is virtual hardware
like the vmware svga device, but also Xen hardware likes to
be notify. There is also real hardware like DisplayLink and
DisplayPort that might take advantage of this ioctl.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:25:47 +10:00
Jesse Barnes 7bd4d7be5c drm: use page flip event to signal flip completion
We don't actually know which frame number the flip will complete on, so
userspace needs a specific flip notification to tell it when the last flip
completed.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2009-12-01 09:11:53 -08:00
Eric Anholt f40d6817a5 Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-12-01 09:01:54 -08:00
Kristian Høgsberg d91d8a3f88 drm/kms: add page flipping ioctl
This adds a page flipping ioctl to the KMS API.  The ioctl takes an fb ID
and a ctrc ID and flips the crtc to the given fb at the next vblank.
The ioctl returns immediately but the flip doesn't happen until after
any rendering that's currently queued up against the new framebuffer
is done.  After submitting a page flip, any execbuffer involving the
old front buffer will block until the flip is completed.

Optionally, a vblank event can be generated when the swap eventually
happens.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:05:47 +10:00
Daniel Vetter 7a9c906094 drm: make drm_mode_object_find typesafe
I've wasted half a day hunting a bug that could easily be spotted by
gcc. Prevent this from reoccurring.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:06 -08:00
Zhao Yakui 185974dd59 drm: Delete the DRM_DEBUG_KMS in drm_mode_cursor_ioctl
We can get the corresponding info by adding the boot option of "drm.debug=
0x07". But On some boxes it will print the following message many times in
course of moving mouse. In such case the useful DRM debug info will be flushed.
   >[drm:drm_mode_cursor_ioctl],

Avoid using the DRM_DEBUG_KMS in drm_mode_cursor_ioctl.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:57 +10:00
Dave Airlie d50ba256b5 drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]

This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.

video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.

The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.

video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.

The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Dave Airlie 13a8195b14 drm: split crtc/fb helpers into a separate module
I really don't want to have core drm module rely on CONFIG_FB,
so this is the easiest answer.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 15:45:33 +10:00
Dave Airlie 51c8b4071d Merge Linus master to drm-next
linux-next conflict reported needed resolution.

Conflicts:
	drivers/gpu/drm/drm_crtc.c
	drivers/gpu/drm/drm_edid.c
	drivers/gpu/drm/i915/intel_sdvo.c
	drivers/gpu/drm/radeon/radeon_ttm.c
	drivers/gpu/drm/ttm/ttm_bo.c
2009-08-20 13:38:04 +10:00
Jesse Barnes 53bd83899f drm: clarify scaling property names
Now that we're using the scaling property in the Intel driver I noticed
that the names were a bit confusing.  I've corrected them according to
our discussion on IRC and the mailing list, though I've left out
potential new additions for a new scaling property with an integer (or
two) for the scaling factor.  None of the drivers implement that today,
but if someone wants to do it, I think it could be done with the
addition of a single new type and a new property to describe the
scaling factor in the X and Y directions.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 16:06:40 +10:00
Dave Airlie 5ef5f72feb drm/kms: teardown crtc correctly when fb is destroyed.
If userspace destroys a framebuffer that is in use on a crtc,
don't just null it out, tear down the crtc properly so the
hw gets turned off.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 14:11:34 +10:00
Francisco Jerez a75f023629 drm: Add more standard TV properties.
Overscan, saturation, hue. Used in the nouveau driver for GPUs with
integrated TV encoders.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-13 10:33:48 +10:00
Francisco Jerez b6b7902e54 drm: Define some new standard TV properties.
Namely "brightness", "contrast" and "flicker reduction".

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:14:46 +10:00
Francisco Jerez aeaa1ad3ff drm: Define DRM_MODE_SUBCONNECTOR_SCART
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:11:00 +10:00
Francisco Jerez 74bd3c26b9 drm: Define DRM_MODE_CONNECTOR_TV
The existing TV connector types are often unsuitable either because
there is no way to probe them until they're actually plugged in or
because they can change during run time (e.g. 7-pin DIN connectors
that behave as S-Video, Component, Composite or SCART depending on the
adaptor plugged in).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:10:56 +10:00
Zhao Yakui 58367ed65f drm: Add the debug info in generic drm mode by using DRM_DEBUG_KMS
Add the debug info in generic drm mode by using DRM_DEBUG_KMS

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:02:51 +10:00
Jakob Bornecrantz 7781de7456 drm: Small logic fix in drm_mode_setcrtc
Match the logic to the comments in the debug message

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:29:27 +10:00
Keith Packard c9fb15f60e drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
Making the drm_crtc.c code recognize the DPMS property and invoke the
connector->dpms function doesn't remove any capability from the driver while
reducing code duplication.

That just highlighted the problem with the existing DPMS functions which
could turn off the connector, but failed to turn off any relevant crtcs. The
new drm_helper_connector_dpms function manages all of that, using the
drm_helper-specific crtc and encoder dpms functions, automatically computing
the appropriate DPMS level for each object in the system.

This fixes the current troubles in the i915 driver which left PLLs, pipes
and planes running while in DPMS_OFF mode or even while they were unused.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-04 09:32:12 +10:00
Kristian Høgsberg ea39f83516 drm: Release user fbs in drm_release
Avoids leaking fbs and associated buffers on release.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Tested-by: Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20 12:21:11 +10:00
Jesse Barnes ad2563c2e4 drm: create mode_config idr lock
Create a separate mode_config IDR lock for simplicity.  The core DRM
config structures (connector, mode, etc. lists) are still protected by
the mode_config mutex, but the CRTC IDR (used for the various identifier
IDs) is now protected by the mode_config idr_mutex.  Simplifies the
locking a bit and removes a warning.

All objects are protected by the config mutex, we may in the future,
split the object further to have reference counts.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-22 17:53:05 +10:00
Harvey Harrison 9b4778f680 trivial: replace last usages of __FUNCTION__ in kernel
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-07 15:48:54 -08:00
Kristian H�gsberg 0c7c266475 drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
The replace fb ioctl replaces the backing buffer object for a modesetting
framebuffer object.  This can be acheived by just creating a new
framebuffer backed by the new buffer object, setting that for the crtcs
in question and then removing the old framebuffer object.

Signed-off-by: Kristian Hogsberg <krh@redhat.com>
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Jakob Bornecrantz e0c8463a8b drm: sanitise drm modesetting API + remove unused hotplug
The initially merged modesetting API has some uglies in it, this
cleans up the struct members and ioctl ordering for initial submission.

It also removes the unneeded hotplug infrastructure.

airlied:- I've pulled this patch in from git modesetting-gem tree.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Dave Airlie f453ba0460 DRM: add mode setting support
Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00