When BIOS is damn crazy and gives no pin-config at all, the driver might
lead to a NULL dereference. Let's add a NULL check for such a case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similarly in patch_via.c, parse the active analog-loopback connections
and create a list dynamically rather than static arrays.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Resitance is futile. The remaining static model quirks for Apple
machines with ALC882-compatible codecs are converted to the auto-parser
now. We can remove all alc*_quirks.c finally.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If anyone wants to debug the driver and avoid the existing fix-ups,
pass model=nofixup option. Then the driver will skip to pick up the
fixup list.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Finally the all static quirks for ALC880 are converted to the
auto-parser. Since we are never sure whether the BIOS on so many old
machines are really correct, the quirk table entries are copied as
they are, but just providing the proper pin-config values
accordingly.
Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted
slightly to be built again. There might be some compile warnings due
to the remaining alc882 quirks, but these shall be killed sooner or
later, I don't care it much at this point.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that BIOS on most of ASUS mobo's set the pin-config tables
reasonably well for the auto-parser. We'd need GPIO setups, but should
work as is other than that.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS Z71V has a totally broken BIOS setup (at least the info I got),
thus we need to override the whole pin-config table to make the
auto-parser working correctly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The model=uniwill would work almost as is, but a couple of adjustments
are needed to make the mutli-io working correctly. The headphone and
speaker pins have to be marked properly in pin configs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling
like Fujitsu laptops with ALC880.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar as the previous patch for model=fujitsu, we can now move the
static quirk for F1734 to the auto-parser. The only difference is the
default pin configurations: F1734 has less pins than Amilo's.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now adding the support for the volume-knob widget, we can move the static
quirk for ALC880 model=fujitsu to the auto-parser completely.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the
whole setups of patch_ops & co, so that the fix-up function may override
the default setup. This will be needed for installing the own unsol
event handler (e.g. for volume-knob controls).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clevo machines with ALC880 are all well with proper BIOS setup.
It seems still requiring the additional COEF setup for the EAPD.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Refactor the DAC filling function to be used for both the primary
line outputs and extra outputs using the individual badness tables.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Medion W810 with ALC880 has a typical BIOS bug, copying the
pin-defaults without disabling the unused pins. At least, the pin
0x17 must be disabled. Also, it requires GPIO-2 setup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC880 model=lg could work fine with the auto-parser due to the recent
rewrite, but it still needs the manual adjustment; namely, the BIOS leaves
unused pins as some real active jacks. This confuses the parser.
Thus we just cover these pins and override the pin-configs as a fix-up.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Try harder to fit the multi-io pins also by checking the hard-wired
connections for multi-ios. Also, the badness values are adjusted to
prioritize the multi-ios as more valuable. These changes will enable
the multi-io on some machines without losing the current capability.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far, the Realtek driver tires to assign the single-connected routes
for all pins only once at the beginning. However, since some DACs have
been already mapped, the rest pins might have also single conections.
In this patch, the driver does the single-connection assignment in a
loop until all possbile single-connections are checked. This will
improve the DAC assignment, e.g. for ASUS G72.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch improves the Realtek auto-parser for assigning the DACs and
mixers in more suitable ways by evaluating the assignment with "badness"
calculations.
When assigning a DAC hinders the assignment of individual DACs for
other pins, some badness point is given. Similarly, when it blocks the
assignment of unique mixer controls, another badness point is added.
Also, if no DAC, even shared DAC, can be assigned, more badness is
pointed. Finally, comparing the accumulated badness, the best route is
chosen among several trials.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the connections from the pin selector contain only two
widgets, a route to DAC and the aa-mixer, it's certainly a
single connection. In such a case, get_dac_if_single() should
return the connected DAC, too.
This will improve the detection of the individual DAC
assignment for each pin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix
missing volume controls with ALC260] is too narrow for some codecs,
which may have more NIDs than 0x20, thus it may overflow the bitmap
array on them.
Just double the number to cover all and also add a sanity-check code
to be safer.
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've enabled the static fixups for ASUS machines with ALC269 codec,
just for making things compatible during the transition to the auto-
parser. However, it seems that the static configurations do more harmful
than good, as some of entries don't match with the actual hardware setups.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1
per the jack state, in addition to the COEF setup used for other Acer
laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.
In addition, it needs a special COEF setup with 0x3050.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ALC260 model=acer needs GPIO1 setup. It could be selected well
if the codec SSID is set properly by BIOS, but to make sure, enable it
forcibly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The model=will for ALC260 requires the pin 0x0f to be a headphone and
some special verbs for the COEF to turn on the amp. Now added these as
fixup entries and removed the static model quirk.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Conflicts:
sound/pci/hda/patch_realtek.c
Merged back the fix for Acer Aspire 6935 with ALC889 codec.
The fix commit was based on 3.2 kernel so that it can be applied to
stable kernel cleanly.
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in. However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.
As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few machines with ALC861 & co are reported not to work properly with
the auto-mute feature in software. The auto-mute feature is implemented
in the hardware level, and the jack-detection never works with them.
Also, rename the fixup index as ALC861_FIXUP_* to follow the standard.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sparse complains that "spec->multiout.dac_nids" is a pointer.
sound/pci/hda/patch_realtek.c:2321:37: error: incompatible types for operation (>)
sound/pci/hda/patch_realtek.c:2321:37: left side has type unsigned short const [usertype] *dac_nids
sound/pci/hda/patch_realtek.c:2321:37: right side has type int
It was meant to be num_dacs instead of dac_nids.
Although the current code still works as expected (when num_dacs is zero,
dac_nids should be NULL, too), better to fix now, of course.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In most cases, the slave strings for vmaster are identical between
volumes and switches except for "xxx Volume" and "xxx Switch" suffix.
Now snd_hda_add_vmaster() takes the optional suffix argument so that
each string can be composed with the given suffix, and we can share the
slave name strings in both volume and switch calls nicely.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent changes in Realtek auto-parser added the new "Bass Speaker"
and "CLFE" mixer elements which should be tracked as vmaster slaves,
too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42720
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that other ASUS laptops require the similar fix to
enable the VREF on the pin 0x0f for the secret output amp, not only
ASUS A6Rp. Moreover, it's required even when the pin is being used
as the output. Thus, writing a fixed value doesn't work always.
This patch applies the VREF-fix for all ASUS laptops with ALC861/660
in a fixup function that checks the current value and turns on only
the VREF value no matter whether input or output direction is set.
The automute function is modified as well to keep the pin VREF upon
muting/unmuting via pin-control; otherwise the pin VREF is reset at
plugging/unplugging a jack.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The user reports that he needs to add model=auto for audio to
work properly. In fact, since node 0x15 is not even a pin node,
the existing fixup is definitely wrong. Relevant information can
be found in the buglink below.
Cc: stable@kernel.org (3.2+)
BugLink: https://bugs.launchpad.net/bugs/918254
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The very same problem is seen on Haier W18 laptop with ALC861 as seen
on ASUS A6Rp, which was fixed by the commit 3b25eb69.
Now we just need to add a new SSID entry pointing to the same fixup.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The refactoring of Realtek codec driver in 3.2 kernel caused a
regression for ASUS A6Rp laptop; it doesn't give any output.
The reason was that this machine has a secret master mute (or EAPD)
control via NID 0x0f VREF. Setting VREF50 on this node makes the
sound working again.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588
Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that all quirks have the own unsol handlers, we don't need to check
use_jack_tbl flag any more. Let's kill it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently added jack-kctl support sets the unsol event tags
dynamically, while static quirks usually set the fixed tags in the
init_verbs array. Due to this conflict, the own unsol event handler
can't retrieve the tag and handle it properly any more.
For fixing this, avoid calling snd_hda_jack_add_kctls() for static
quirks, and always let them use own handlers instead of the standard
one for the auto-pareser.
Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai