Commit Graph

34 Commits

Author SHA1 Message Date
Lee Jones a22c514c6a mfd: abx500-core: Remove unused function abx500_dump_all_banks()
abx500_dump_all_banks() has no callers in the kernel, so it's probably
safe to remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:51 +01:00
Jay Aurabind 7abafa0a66 mfd: abx500-core: Fix compiler warning larger stack frame
On systems with CONFIG_FRAME_WARN=1024, compiler warns the allocation of
an object of struct device on stack. Make the allocation dynamically to
fix the warning. Also change the caller's return type to int so as to
account for error handling.

drivers/mfd/abx500-core.c: In function ‘abx500_dump_all_banks’:
drivers/mfd/abx500-core.c:167:1: warning: the frame size of 1032 bytes
is larger than 1024 bytes [-Wframe-larger-than=]

Signed-off-by: Aurabindo J <mail@aurabindo.in>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03 08:11:11 +01:00
Hongbo Zhang 2c89940786 ab8500_{bmdata,fg}: Add const attributes to some data arrays
This patch adds const attributes to AB8500 power and temperature related
read-only data arrays.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 17:34:36 -07:00
Lee Jones 861a30da53 ab8500-bm: Add support for the new ab8540 platform
Provide AB8540 platform specific information required to run the
Battery Management subsystem on AB8540 based devices. For this to
happen we see the introduction of separate platform specific data
structures and a means in which to process them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:48 +08:00
Lee Jones db43e6c473 ab8500-bm: Add usb power path support
AB8540 supports power path function in USB charging mode for fast
power up with dead and weak battery, and it could extend
the battery age.

When USB charging starts, if the Vbattrue is below than SW cut off
voltage, power path and pre-charge should be enabled. If Vbattrue
is higher than SW cut off voltage, power path and pre-charge should
be disabled. This is to make sure full current to battery charge.
At the end of charge, power path should be enable again to reduce
charging the battery again.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:46 +08:00
Lee Jones 93ff722e88 ab8500-fg: Add power cut feature for ab8505 and ab8540
Add support for a power cut feature which allows user to
configure when ab8505 and ab8540 based platforms should shut
down system due to low battery.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:36 +08:00
Linus Torvalds ab7826595e This is the MFD pull request for the 3.9 merge window.
No new drivers this time, but a bunch of fairly big cleanups:
 
 - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation,
   OMAP5 support and clock management code cleanup.
 
 - The first step of a major sync for the ab8500 driver from Lee Jones. In
   particular, the debugfs and the sysct interfaces got extended and improved.
 
 - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core
   driver, with a much needed module id lookup code improvement.
 
 - The regular wm5102 and arizona cleanups and fixes from Mark Brown.
 
 - Laxman Dewangan extended the palmas APIs in order to implement the palmas
   GPIO and rt drivers.
 
 - Laxman also added DT support for the tps65090 driver.
 
 - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and
   Darren Hart.
 
 - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based
   devices to switch to the new abx500 pin-ctrl driver.
 
 - The max8925 now has device tree and irqdomain support thanks to Qing Xu.
 
 - The recently added rtsx driver got a few cleanups and fixes for a better
   card detection code path and now also supports the RTS5227 chipset, thanks
   to Wei Wang and Roger Tseng.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJWtoAAoJEIqAPN1PVmxKHvEP/2B0uUJQpRjTjc9lgrzaUdFO
 QdSyj8Vpz1fZPF3cDuik/Be91U1nICyJWZZ7Yvngih3kbqiGw8nbp9AATwdF4Anl
 +QEtPS9YIpu1w5NS4r01q+cx3NxFsaR5yfNPKLWWnLtN8zHq4qQS8SF8jjdrsgkz
 zUJrjn1GfPPeuyR6Fuko9Mxk6oQ6TUazWJwmxzSCcrKKQ7GlAnbRWcwv2Qnv3GTg
 xi9S85xmLtVhLmMIQ2OR4JP56Vc49OL2/+hv1uShtFVDR4JLeZ5l8j0IPjgXJTrv
 ZbcrzEfJkV+zkY5RmDQrZzNLIWQmH9lj0bzitrS8Ii622J/mfnvQEgnC5fObphjg
 sYKJuBtO9o7XtFJxH7/oXdwM2gC5jDy43FmRv9J2mIDVoX8kNZMzY/sqmL8jm7KD
 MZU0D7liOyF3/1VbZHGSplKp+HKd5XYXCDQEesG/urkDr2edYHdb52iUVYGC32yV
 MaTqXnRMGURdjhCorAZPV8hoQOSWV8pj6oskk+E3upCmWjQWdhKMw3/HzasDLO9B
 eoQSgwZXJLTV8hJjAdgPUjZbxyOyW+9jKA12nyqwX3noq0NseSSJaeZUWmLecmbF
 vXcg4LAwSUycNJ0DxtWC2oEUV9jv4B+dOE7avVT6BDSvth4nzDlO9gOTtxBLcgTz
 JKrAPxY1nS4AUXJbsYTq
 =BhC1
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...
2013-02-24 20:00:58 -08:00
Linus Torvalds 5a1203914a - Four new drivers:
o goldfish_battery:
     This is Android Emulator battery driver. Originally from Google, but
     Intel folks reshaped it for mainline;
 
   o pm2301_charger:
     A new driver for ST-Ericsson 2301 Power Management chip, uses AB8500
     battery management core;
 
   o qnap-poweroff:
     The driver adds poweroff functionality for QNAP NAS boxes;
 
   o restart-poweroff:
     A generic driver that implements 'power off by restarting'. The actual
     poweroff functionality is implemented through a bootloader, so Linux'
     task is just to restart the box. The driver is useful on Buffalo
     Linkstation LS-XHL and LS-CHLv2 boards. Andrew Lunn worked on
     submitting the driver (as well as qnap-poweroff above).
 
 - A lot of fixes for ab8500 drivers. This is a part of efforts of syncing
   internal ST-Ericsson development tree with the mainline. Lee Jones @
   Linaro worked on compilation and reshaping these series;
 
 - New health properties for the power supplies: "Watchdog timer expire"
   and "Safety timer expire";
 
 - As usual, a bunch of fixes/cleanups here and there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRIww1AAoJEGgI9fZJve1bJ7sP/1hR8SYQZ/k0ayxA/kIxNEDA
 Qa2sAcdP5pa4F/A2Wi5MTrckSHuLlRRigWRCPM09emVOvt6g2MdM3Eq6ShuYb2p0
 g2bX0F9KBEa9gdiJC1wNVe9DilXbrJsk86V5E+ZkuVnNzM3S1FA1sPWGhdH66YVq
 9IKxm2XntyXFpuvhSYE01KQoFY+Crv1NEGXoIR7tB6Q1KOf3XswnsFwdKJ95IO5r
 8f/lVYRAYUfeplhrYd3eJTtb/GHhK7CutFV/E6kWlumGCWNVH2xt+dTlAmTUdQvO
 jKe9R5iq5eXFTQmN8QZDH7QdXO1DdmJZ9F112hIAud/93bmNrnc0WqMKM7CFHkfH
 S6ptGgeIdpGEM1KMgzKTNrQeNIYsVNtqbEiIiodR8S4e0cX2pb2n5IfzmELIVc0n
 QMZylORpGaH1lBxTE2RoT4raGeWF5jH0t0b0YRqccRPvQ4VjCJslDOq9IOETUe+/
 YxWpELJigW7FGLMfx0SB2/3s1P4EUaufWvHANCVaPuBsOZga854R4dzms4hKyKsL
 JQg+OKp/Bt78yAj/8/n0FWdxgldp/NjF4485ITQ1eOZyg8VSeIp93Lk6lgSTukux
 R1xLruxfPgdynpmYFCGF99JG2G8RmRuJFSTf8JttvyztkAxQw6zBtdmdiPk38wst
 qpUxdPpNDIvt65Ix7x+D
 =955B
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.9' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Four new drivers:

   - goldfish_battery:

     This is Android Emulator battery driver.  Originally from Google,
     but Intel folks reshaped it for mainline

   - pm2301_charger:

     A new driver for ST-Ericsson 2301 Power Management chip, uses
     AB8500 battery management core

   - qnap-poweroff:

     The driver adds poweroff functionality for QNAP NAS boxes

   - restart-poweroff:

     A generic driver that implements 'power off by restarting'.  The
     actual poweroff functionality is implemented through a bootloader,
     so Linux' task is just to restart the box.  The driver is useful on
     Buffalo Linkstation LS-XHL and LS-CHLv2 boards.  Andrew Lunn worked
     on submitting the driver (as well as qnap-poweroff above).

  Additionally:

   - A lot of fixes for ab8500 drivers.  This is a part of efforts of
     syncing internal ST-Ericsson development tree with the mainline.
     Lee Jones @ Linaro worked on compilation and reshaping these
     series.

   - New health properties for the power supplies: "Watchdog timer
     expire" and "Safety timer expire"

   - As usual, a bunch of fixes/cleanups here and there"

* tag 'for-v3.9' of git://git.infradead.org/battery-2.6: (81 commits)
  bq2415x_charger: Add support for offline and 100mA mode
  generic-adc-battery: Fix forever loop in gab_remove()
  goldfish_battery: Add missing GENERIC_HARDIRQS dependency
  da9030_battery: Include notifier.h
  bq27x00_battery: Fix reporting battery temperature
  power/reset: Remove newly introduced __dev* annotations
  lp8727_charger: Small cleanup in naming
  ab8500_btemp: Demote initcall sequence
  ds2782_battery: Add power_supply_changed() calls for proper uevent support
  power: Add battery driver for goldfish emulator
  u8500-charger: Delay for USB enumeration
  ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
  ab8500-charger: Do not touch VBUSOVV bits
  ab8500-fg: Use correct battery charge full design
  pm2301: LPN mode control support
  pm2301: Enable vbat low monitoring
  ab8500-bm: Flush all work queues before suspending
  ab8500-fg: Go to INIT_RECOVERY when charger removed
  ab8500-charger: Add support for autopower on AB8505 and AB9540
  abx500-chargalg: Add new sysfs interface to get current charge status
  ...

Fix up fairly straightforward conflicts in the ab8500 driver.  But since
it seems to be ARM-specific, I can't even compile-test the result..
2013-02-20 10:19:07 -08:00
Samuel Ortiz dce7886e80 Merge branch 'for-mfd' of git://git.linaro.org/people/ljones/linux-3.0-ux500 into for-next
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:23:17 +01:00
Mian Yousaf Kaukab e0f4fec030 mfd: abx500-core: Provide an API to dump all ABx500 registers
Some drivers can detect subsystem failures e.g. shared memory driver
can detect modem sub system failures. It would be helpful in analyzing
these failures if AB register dump is available at that point. This
patch adds the API for the drivers to dump AB registers in the kernel
log.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Reviewed-by: Linus WALLEIJ <linus.walleij@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-02-04 08:31:34 +00:00
Lee Jones 97034a1e04 ab8500-bm: Remove individual [charger|btemp|fg|chargalg] pdata structures
None of the aforementioned components have their own dedicated
platform data structures anymore. Instead they have all been
merged into one big Battery Management container. Let's remove
them and place all the nice newly added attributes into the core
container.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-01-23 14:39:21 +00:00
Lee Jones 00441b5e6b mfd: Fix compile errors and warnings when !CONFIG_AB8500_BM
drivers/mfd/ab8500-core.c:1015:21: error: ‘ab8500_bm_data’ undeclared here

include/linux/mfd/abx500/ab8500-bm.h:445:13: warning: ‘ab8500_fg_reinit’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:448:13: warning: ‘ab8500_charger_usb_state_changed’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:451:29: warning: ‘ab8500_btemp_get’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:455:12: warning: ‘ab8500_btemp_get_batctrl_temp’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:463:12: warning: ‘ab8500_fg_inst_curr_blocking’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:442:12: warning: ‘ab8500_fg_inst_curr_done’ defined but not used
include/linux/mfd/abx500/ab8500-bm.h:447:26: warning: ‘ab8500_fg_get’ defined but not used

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-22 17:28:44 +01:00
Marcus Cooper ea40240178 ab8500_bm: Recharge condition not optimal for battery
Today the battery recharge is determined with a voltage threshold. This
voltage threshold is only valid when the battery is relaxed. In charging
algorithm the voltage read is the loaded battery voltage and no
compensation is done to get the relaxed voltage. When maintenance
charging is not selected, this makes the recharging condition to almost
immediately activate when there is a discharge present on the battery.

Depending on which vendor the battery comes from this behavior can wear
out the battery much faster than normal.

The fuelgauge driver is responsible to monitor the actual battery
capacity and is able to estimate the remaining capacity. It is better to
use the remaining capacity as a limit to determine when battery should
be recharged.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-01-15 17:43:46 -08:00
Lee Jones 23a04f9f40 ab8500_bm: Always send platform specific battery information via pdata
Currently the AB8500 battery management subsystem receives platform
specific information via two different means depending on how the
platform is booted. If DT is not enabled, a reference to a *_bm_data
data structure containing each platform specific attribute is passed
though platform_data. However, if DT is enabled, then platform_data
is empty and the reference is gained though a DT specific probe
function. There are two issues here 1) the same reference is
being collected each time and 2) the DT way doesn't allow any
provisions to select different platform specific attributes, which
kind of defeats the object.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:54 +00:00
Lee Jones b0284de05e ab8500_bm: Rename battery management platform data to something more logical
The platform specific battery management configuration data structure
is currently called 'bat' short for 'battery'; however, it contains
information for all components of the battery management group, rather
than information pertaining to the battery itself - there are other
structures for that. So, in keeping with its structure namesake
'abx500_bm_data', we rename it to 'bm' here. Using similar logic,
we're also renaming 'bmdevs_of_probe' to the more device specific
'ab8500_bm_of_probe'.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-12-11 08:43:53 +00:00
Rajanikanth H.V a12810ab9f ab8500: Add devicetree support for chargalg
This patch adds device tree support for charging algorithm driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:18 -08:00
Rajanikanth H.V e0f1abeba5 ab8500: Add devicetree support for fuelgauge
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
  Note: of_probe() routine for battery managed devices is made
  common across all bm drivers.
- test status:
  - interrupt numbers assigned differs between legacy and FDT mode.

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-11-18 19:37:04 -08:00
Marcus Cooper 0fd0013cda mfd: ab3100: Split ab3100 headers out of abx500.h
The U8500 has its own set of separate header, so the abx500
becomes completely abstract. Do the same split for the AB3100
legacy ASIC.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14 09:52:15 +02:00
Linus Walleij 72fb92200d mfd/ab5500: delete AB5500 support
This platform has been obsoleted and was only available inside of
ST-Ericsson, no users of this code are left in the world. This
deletes the core U5500 support entirely in the same manner as the
obsoleted U8500 silicon was previously deleted.

Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Jonas Aberg <jonas.aberg@stericsson.com>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-05-02 00:39:55 +02:00
Linus Torvalds 919c840167 Various small bugfixes and enhancements, plus two new drivers:
- A quite complex ab8500 charger driver, submitted by
   Arun Murthy @ ST-Ericsson;
 - Summit Microelectronics SMB347 Battery Charger, submitted by
   Bruce E. Robertson and Alan Cox @ Intel.
 
 And that's all.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIcBAABAgAGBQJPdhj7AAoJEGgI9fZJve1bSKEQAKzKXPwqpBREXzS888YWzb34
 0r3Bly+F8eSRTjclbEEvEOVVCjxKOFpow5lN+eAkRNAMLDBcMamfBTR+rpoYb822
 d7R4Hy/stVnmD5nul0WMezZ0OZf6qRy8kHazmvb63Jk37ykof52TqoEInKdHL/ww
 afUNfCnAFAbZkjxEr/9MwpM+nzYKdlGIoQlu9CJLARJiT9CyICjgHG48MGmyxOws
 1LPha40jXuKLoyE+6nvG1Ji71NzZlFaVuFpzk75kjsWoB78zkRsMSv+zboHRz3QP
 PI+uS54auIkGhqeIeEuuSzPZx+1K2Fr2/qyut3tqM8AejBE4kETiBAy0b0BREBSd
 NqA4/Yw24c8xglIFP6OlNjHnLgCsExfHATzqzML2El/dXG8P2ggEayZzDh9bmsuU
 ZNKOmHZYgEj2eEorJcmlfZ23rJwlxuspl1m2nH2WEnqw6Z6TnskK4N1JSNlpGRPU
 j+iHbTPA04hultQkzNHCdPRR/jK1IC5eGdwc612QgxOhZPkvhmW92e8EOVz/3E3X
 TqKXfBiKxKtkIncLPYFh7oeZINKnlqZrXsYrHhxhlm9UstGOqfEIqbCGqlf0Q4P1
 WOhIQe1cP/JpB9T58e3mLF2dQIGScTqzQCRSW6/m+3HmDwZb8JyUQRw5188s3yJr
 umrBS5hqS+z3bISWrcGi
 =Y8fe
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Various small bugfixes and enhancements, plus two new drivers:
   - A quite complex ab8500 charger driver, submitted by Arun Murthy @
     ST-Ericsson;
   - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce
     E Robertson and Alan Cox @ Intel.

  And that's all."

* tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits)
  max17042_battery: Clean up interrupt handling
  Revert "max8998_charger: Include linux/module.h just once"
  ab8500_fg: Fix some build warnings on x86_64
  max17042_battery: Fix CHARGE_FULL representation.
  max8998_charger: Include linux/module.h just once
  power_supply: Convert i2c drivers to module_i2c_driver
  lp8727_charger: Add MODULE_DEVICE_TABLE
  charger-manager: Simplify charger_get_property(), get rid of a warning
  charger-manager: Clean up for better readability
  da9052-battery: Convert to use module_platform_driver
  da9052-battery: Fix a memory leak when unload the module
  da9052-battery: Add missing platform_set_drvdata
  ab8500: Turn unneeded global symbols into local ones
  ab8500_fg: Fix copy-paste error
  ab8500_fg: Get rid of 'struct battery_type'
  ab8500_fg: Get rid of 'struct v_to_cap'
  ab8500_btemp: Get rid of 'enum adc_therm'
  ab8500_charger: Convert to the new USB OTG calls
  ab8500-btemp: AB8500 battery temperature driver
  ab8500-fg: A8500 fuel gauge driver
  ...
2012-03-30 16:09:02 -07:00
Linus Torvalds 30304e5a79 MFD changes for 3.4
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPcXgCAAoJEIqAPN1PVmxKh2oP/2Ns+dr4oOF8z+uqYG1oisJd
 CxBTC1Bi9gYBtpiMztPiHZWiQtVXoDgLbLkx6ooWH5dpwCdvU6TVBZUJp4wpELtx
 mMk5vJy4/INHgI0nk5wUOr76rNlQfIcK04f+LHBSG1iljUkoVR3FefVKgoyIP+Wv
 oiCeuCyQcYIUmG1pVt1x43OoS+2xgjWQA67AalLLRj1DOA5OkvUL7NGsrZ1iZTUh
 YHQJsK6ER3MgbFFEImtn10NNFwAEG04o6vi42DFW1O0awm6kmVoLjo46wS+UiKoh
 Vx8t5ZGvlYOZ1ZM9N5ETgQnihBt7cOhA3ivZar8h+WiYVTRJs1ZSkpmnlpmM4YY9
 RCZ5DRw3N39R0ezkNVGSr1Xn1vkysIiZI82frrJiPUYLKihsrBzj2Jq3O25iILCf
 Iyv7HBEJxAb3x0zlF6kPhaA8OW4dssaHTLNx5IJSOKwiwVLdm4RPyOHh9QVz++p/
 p0hvSQWK1MUruBbBrjF/FN+FidgK2iU0iDW/GoDwI7OKymSxg7sauLtp0cZpo6nT
 F+Ep6yl/uR5vxih4LSYFJOjoeKuwIo/x92H0qJ3UroaUs9DNJ7UCKchXXiQ1Wtnz
 tAAsWP1YsMxMzlMxqW5J9w4LJynJ8bqrC0L8+HWzIUwikA8wv8/47Pmc/vPW0Y3N
 5L7KMS8/iFCsS8rPmGeP
 =onDl
 -----END PGP SIGNATURE-----

Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
   TI's TPS65090 and TPS65217.
 - New variants support (8420, 8520 ab9540), cleanups and bug fixes for
   the abx500 and db8500 ST-E chipsets.
 - Some minor fixes and update for the wm8994 from Mark.
 - The beginning of a long term TWL cleanup effort coming from the TI
   folks.
 - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
   drivers.

Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).

* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
  gpio/twl: Add DT support to gpio-twl4030 driver
  gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
  mfd: Detach twl6040 from the pmic mfd driver
  mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
  mfd: Micro-optimization on twl4030 IRQ handler
  mfd: Make twl4030 SIH SPARSE_IRQ capable
  mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
  mfd: Remove references already defineid in header file from twl-core
  mfd: Remove unneeded header from twl-core
  mfd: Make twl-core not depend on pdata->irq_base/end
  ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
  mfd: Return twl6030_mmc_card_detect IRQ for board setup
  Revert "mfd: Add platform data for MAX8997 haptic driver"
  mfd: Add support for TPS65090
  mfd: Add some da9052-i2c section annotations
  mfd: Build rtc5t583 only if I2C config is selected to y.
  mfd: Add anatop mfd driver
  mfd: Fix compilation error in tps65910.h
  mfd: Add 8420 variant to db8500-prcmu
  mfd: Add 8520 PRCMU variant to db8500-prcmu
  ...
2012-03-28 13:56:35 -07:00
Arun Murthy 1668f81159 abx500-chargalg: Add abx500 charging algorithm
This is a charging algorithm driver for abx500 variants. It is the central
entity for battery driver and is responsible for charging and monitoring
the battery driver. It is a hardware independant driver and also monitors
other abx500 power supply devices.

Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
2012-03-26 20:41:02 +04:00
Paul Gortmaker 313162d0b8 device.h: audit and cleanup users in main include dir
The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.

Clean up the users as follows:

1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.

2) For headers not really using anything from device.h, simply
delete the include altogether.

3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h

4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).

Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.

Total removals from #1 and #2: 51.  Total additions coming
from #3: 9.  Total other implicit dependencies from #4: 7.

As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-16 10:38:24 -04:00
Linus Walleij 0f62083759 mfd: Add ab8500 version detection and enforcing
There are currently four different versions of the AB8500
around: AB8500, AB8505, AB9540 and AB8540. Unfortunately:

- Some of the chips (AB8500, AB8505, AB9540) cannot read
  the AB8500_REV_REG register but return errors

- Some of them have the same ID value in the hardware
  register AB8500_REV_REV, for example the first versions
  of AB8505 and AB9540 have 0xFF in this register -
  just like the AB8500.

So we need to be able to enforce a certain version from
the platform. We do this by using the id of the platform
device that provides the read/write functions.

Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com>
Signed-off-by: Alex Macro <alex.macro@stericsson.com>
Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06 18:46:42 +01:00
Linus Walleij b958f7a7cb mfd: Fix missing abx500 header file updates
I missed to include a patch adding the new silicon revision define
CUT3P3 and remove the retired CUT0 versions of AB8500. Also delete
the reference to the retired AB3550 from the header.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-11-02 17:24:06 +01:00
Linus Walleij 8959e74399 mfd: Delete ab3550 driver
The AB3550 never passed the prototype stage. Instead it was used
as a precursor to AB5500 for testing basic building blocks used
in that chip, since they had large similarities. Since AB3550 will
not see the light of day in product form and since the prototypes
are no longer used, let's delete the driver and any references to
it.

Cc: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:16 +02:00
Mattias Wallin 3d5e2cabf1 mfd: ab5500 chip register access
The analog baseband chip ab5500 is a multi functional chip
containing regulators, charging, gpio, USB and accessory detect.
It also contain various multimedia functionalities like digital
encoder and audio codec.
The core driver added with this patch provides register access via
i2c via PRCMU. Event handling implemented as irq_chip will come in
future patches since it depends on PRCMU functionality not yet
implemented.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24 14:09:16 +02:00
Linus Walleij 863dde5bfa mfd: Provide ab8500-core enumerators for chip cuts
Since functionality in MFD cells may need to be adjusted according to
chip revision, let's enumerate them and keep track of them.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:45:42 +02:00
Samuel Ortiz 1f235a3785 mfd: Use mfd cell platform_data for ab3550 cells platform bits
With the addition of a platform device mfd_cell pointer, MFD drivers
can go back to passing platform data back to their sub drivers.
This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers
MFD agnostic. This is mostly needed for non MFD aware sub drivers.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26 19:44:57 +02:00
Andres Salomon 0ce5fabe59 mfd: mfd_cell is now implicitly available to ab3550 driver
No clients (in mainline kernel, I'm told that drivers exist in external
trees that are planned for mainline inclusion) make use of this, nor
do they make use of platform_data, so nothing really had to change here.

The .data_size field is unused, so its usage gets removed.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:41:51 +01:00
Mark Brown c6252e9ce7 mfd: Declare abx500_remove_ops()
Otherwise sparse warns about a public symbol with no declaration and
the compiler can't spot if the callers and users have different signatures
for the function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:40 +02:00
Mattias Wallin 47c1697508 mfd: Align ab8500 with the abx500 interface
This patch makes the ab8500 mixed signal chip expose the same
interface for register access as the ab3100, ab3550 and ab5500 chip.
The ab8500_read() and ab8500_write() is removed and replaced with
abx500_get_register_interruptible() and
abx500_set_register_interruptible().

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:19 +02:00
Mattias Wallin fa661258a2 mfd: AB3100 register access change to abx500 API
The interface for the AB3100 is changed to make way for the
ABX500 family of chips: AB3550, AB5500 and future ST-Ericsson
Analog Baseband chips. The register access functions are moved
out to a separate struct abx500_ops. In this way the interface
is moved from the implementation and the sub functionality drivers
can keep their interface intact when chip infrastructure and
communication mechanisms changes. We also define the AB3550
device IDs and the AB3550 platform data struct and convert
the catenated 32bit event to an array of 3 x 8bits.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:45 +02:00
Linus Walleij 812f9e9d42 mfd: Renamed ab3100.h to abx500.h
The goal here is to make way for a more general interface for the
analog baseband chips ab3100 ab3550 ab550 and future chips.

This patch have been divided into two parts since both changing name
and content of a file is not recommended in git.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-05-28 01:37:44 +02:00