With multiple list holding format entries, we need the support properly
releasing format output/sort fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those functions are no longer needed. They operate over perf_hpp__format
array which is now used only as template for dynamic entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-11-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we use static output fields, because we have single global
list of all sort/output fields.
We will add hists specific sort and output lists in following patches,
so we need all format entries to be dynamically allocated. Adding
support to allocate output sort field.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.
Replica of a patch by Jiri for 'perf report'.
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ui initialization changes hpp format callbacks, based on the used
browser. Thus we need this init being processed before setup_sorting.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we have the 'equal' method implemented for hpp format entries
we can ease up the logic in the following functions and make them
generic wrt comparing format entries:
perf_hpp__setup_output_field
perf_hpp__append_sort_keys
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 'hpp__equal' callback function to compare hpp output format
entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To easily compare format entries and make it available for all kinds of
format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are going to add dynamic hpp format fields, so we need to make the
'len' change for the format itself, not in the perf_hpp__format
template.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently there's no way of comparing hpp format entries, which is
needed in following patches.
Adding _idx fields into struct perf_hpp_fmt to recognize and be able to
compare hpp format entries.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding evsel specific function to sort hists_evsel based hists. The
hists__output_resort can be now used to sort common hists object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently hists__output_resort() depends on hists based on hists_evsel
struct, but we need to be able to sort common hists as well.
Cutting out the sorting base sorting code into output_resort
function, so it can be reused in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1453109064-1026-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Make --percent-limit apply to callchains also and fix some bugs
related to --percent-limit (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3p/S
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-3' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core callchain fixes and improvements from Arnaldo Carvalho de Melo <acme@redhat.com:
User visible changes:
- Make --percent-limit apply to callchains also and fix some bugs
related to --percent-limit (Namhyung Kim)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
Infrastructure:
- Use the 'feature-dump' target to do the feature checks just once and then
add code to reuse that in the tests/make makefile, speeding up the
'make -C tools/perf build-test' target (Wang Nan)
- Reduce the number of tests the 'build-test' target do to those that don't
pollute the source tree (Arnaldo Carvalho de Melo)
- Improve the output of the build tests a bit by aligning the name of the
tests, more can be done to filter out uninteresting info in the output
(Arnaldo Carvalho de Melo)
- Add perf_evlist pointer to *info_priv_size(), more prep work for
supporting the coresight architecture (Mathieu Poirier)
- Improve the 'perf test bp_signal' test (Wang Nan)
- Check environment before starting the BPF 'perf test', so that we can just
'Skip' older kernels instead of 'FAIL'ing them (Wang Nan)
- Fix cpumode of synthesized buildid event (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CFBX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-2' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf tooling changes from Arnaldo Carvalho de Melo:
New features:
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
Infrastructure changes:
- Use the 'feature-dump' target to do the feature checks just once and then
add code to reuse that in the tests/make makefile, speeding up the
'make -C tools/perf build-test' target (Wang Nan)
- Reduce the number of tests the 'build-test' target do to those that don't
pollute the source tree (Arnaldo Carvalho de Melo)
- Improve the output of the build tests a bit by aligning the name of the
tests, more can be done to filter out uninteresting info in the output
(Arnaldo Carvalho de Melo)
- Add perf_evlist pointer to *info_priv_size(), more prep work for
supporting the coresight architecture (Mathieu Poirier)
- Improve the 'perf test bp_signal' test (Wang Nan)
- Check environment before starting the BPF 'perf test', so that we can just
'Skip' older kernels instead of 'FAIL'ing them (Wang Nan)
- Fix cpumode of synthesized buildid event (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- Rename the "colors.code" ~/.perfconfig variable to "colors.jump_arrows",
as it controls just the that UI element in the annotate browser (Taeung Song)
- Avoid trying to read ELF symtabs from device files, noticed while doing
memory profiling work (Jiri Olsa)
- Improve context detection when offering options in the hists browser,
i.e. some options don't make sense when the browser is not working with
a perf.data file ('perf top' mode), only in 'perf report' mode, like
scripting (Namhyung Kim)
Infrastructure:
- Elliminate duplication in the hists browser filter functions, getting the
common part into a function that receives callbacks for filtering by
DSO, thread, etc (Namhyung Kim)
- Fix misleadingly indented assignment, found using
gcc6 -Wmisleading-indentation (Markus Trippelsdorf)
- Handle LLVM relocation oddities in libbpf, introducing a 'perf test' that
detects such problems and then fixing the problem, so that the test now
passes (Wang Nan)
- More improvements to the build infrastructure to allow reusing the
feature detection facilities (Wang Nan)
- Auto initialize the globals needed by cpu__max_{cpu,node}() routines
(Arnaldo Carvalho de Melo)
Documentation:
- Document the perf sysctls in Documentation/sysctl/kernel.txt (Ben Hutchings)
- Document a bunch more ~/.perfconfig knobs (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cuZc
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Rename the "colors.code" ~/.perfconfig variable to "colors.jump_arrows",
as it controls just the that UI element in the annotate browser (Taeung Song)
- Avoid trying to read ELF symtabs from device files, noticed while doing
memory profiling work (Jiri Olsa)
- Improve context detection when offering options in the hists browser,
i.e. some options don't make sense when the browser is not working with
a perf.data file ('perf top' mode), only in 'perf report' mode, like
scripting (Namhyung Kim)
Infrastructure changes:
- Elliminate duplication in the hists browser filter functions, getting the
common part into a function that receives callbacks for filtering by
DSO, thread, etc. (Namhyung Kim)
- Fix misleadingly indented assignment, found using
gcc6 -Wmisleading-indentation (Markus Trippelsdorf)
- Handle LLVM relocation oddities in libbpf, introducing a 'perf test' that
detects such problems and then fixing the problem, so that the test now
passes (Wang Nan)
- More improvements to the build infrastructure to allow reusing the
feature detection facilities (Wang Nan)
- Auto initialize the globals needed by cpu__max_{cpu,node}() routines
(Arnaldo Carvalho de Melo)
Documentation changes:
- Document the perf sysctls in Documentation/sysctl/kernel.txt (Ben Hutchings)
- Document a bunch more ~/.perfconfig knobs (Taeung Song)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
When all callchains of a hist entry is percent-limited, do not add a
blank line at the end. It makes the entry look like it doesn't have
callchains.
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160128122454.GA27446@danjae.kornet
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report --no-children --percent-limit 0.01 --tui
...
- 0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
- vm_mmap_pgoff
+ 0.02% sys_mmap_pgoff
+ 0.02% vm_mmap
+ 0.02% mprotect_fixup
Current code omits the percent if 'mmap_region' becomes the only node
when percent limit is set to 0.03%, its percent is not 0.06% but users
will assume it incorrectly.
Before:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- mmap_region
do_mmap_pgoff
vm_mmap_pgoff
After:
$ perf report --no-children --percent-limit 0.03 --tui
...
0.06% sleep [kernel.vmlinux] [k] kmem_cache_alloc_trace
kmem_cache_alloc_trace
- perf_event_mmap
- 0.04% mmap_region
do_mmap_pgoff
vm_mmap_pgoff
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass parent node's total period to callchain print functions. This info
is needed by later patch to determine whether it can omit percent or not
correctly.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 8c430a3486 ("perf hists browser: Support folded
callchains") missed to update hist_browser__dump() so it always shows
graph-style callchains regardless of current setting.
To fix that, factor out callchain printing code and rename the existing
function which prints graph-style callchain.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8c430a3486 ("perf hists browser: Support folded callchains")
Link: http://lkml.kernel.org/r/1453909257-26015-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When there's only a single callchain, perf doesn't print its percentage
in front of the symbols. This is because it assumes that the percentage
is same as parents. But if a percent limit is applied, it's possible
that there are actually a couple of child nodes but only one of them is
shown. In this case it should display the percent to prevent
misunderstanding of its percentage is same as the parent's.
For example, let's see the following callchain.
$ perf report -s comm --percent-limit 0.01 --stdio
...
9.95% swapper
|
|--7.57%--intel_idle
| cpuidle_enter_state
| cpuidle_enter
| call_cpuidle
| cpu_startup_entry
| |
| |--4.89%--start_secondary
| |
| --2.68%--rest_init
| start_kernel
| x86_64_start_reservations
| x86_64_start_kernel
|
|--0.15%--__schedule
| |
| |--0.13%--schedule
| | schedule_preempt_disable
| | cpu_startup_entry
| | |
| | |--0.09%--start_secondary
| | |
| | --0.04%--rest_init
| | start_kernel
| | x86_64_start_reservations
| | x86_64_start_kernel
| |
| --0.01%--schedule_preempt_disabled
| cpu_startup_entry
...
Current code omits the percent if 'intel_idle' becomes the only node
when percent limit is set to 0.5%, its percent is not 9.95% but users
will assume it incorrectly.
Before:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
---intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
After:
$ perf report --percent-limit 0.5 --stdio
...
9.95% swapper
|
--7.57%--intel_idle
cpuidle_enter_state
cpuidle_enter
call_cpuidle
cpu_startup_entry
|
|--4.89%--start_secondary
|
--2.68%--rest_init
start_kernel
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass hist entry's period to graph callchain print function. This info
is needed by later patch to determine whether it can omit percentage of
top-level node or not.
No functional change intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's just a wrapper function to align the start position ofcallchains to
'comm' of each thread if it's a first sort key. But it doesn't not work
with tracepoint events and also with upcoming hierarchy view.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently --percent-limit option only works for hist entries. However
it'd be better to have same effect to callchains as well
Requested-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the hist entry addition path doesn't update total_period of
hists and it's calculated during 'resort' path. But the resort path
needs to know the total period before doing its job because it's used
for calculating percent limit of callchains in hist entries.
So this patch update the total period during the addition path. It
makes the percent limit of callchains working (again).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The total period should be get using hists__total_period() since it
takes filtered entries into account. In addition, if callchain mode is
'fractal', the total period should be the entry's period.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453909257-26015-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
A dma_addr_t is potentially smaller than a phys_addr_t on some archs.
Don't truncate the address when doing the pfn conversion.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Matthew Wilcox <willy@linux.intel.com>
[willy: fix pfn_t_to_phys as well]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
$ make -C tools/perf build-test
make[1]: Entering directory `/home/acme/git/linux/tools/perf'
make_pure_O: cd . && make -f Makefile O=/tmp/tmp.mPx0Cmik3f DESTDIR=/tmp/tmp.U0SUmVbtJm
make_clean_all_O: cd . && make -f Makefile O=/tmp/tmp.Yl5UzhTU7T DESTDIR=/tmp/tmp.fop1E4jdER clean all
make_debug_O: cd . && make -f Makefile O=/tmp/tmp.pMn2ozBoXC DESTDIR=/tmp/tmp.azxhDp5sEp DEBUG=1
make_no_libperl_O: cd . && make -f Makefile O=/tmp/tmp.qJPiINMtA7 DESTDIR=/tmp/tmp.KNMrLeGDxZ NO_LIBPERL=1
<SNIP>
More needs to be done to make it more compact, i.e. elide the '-f Makefile',
remove that 'cd . &&', move the DESTDIR= and O= to the end, as they don't
convey that much information besides the fact that they are being set to some
random directory just for this build, move the meat, i.e. the meaningful
feature disabling bits to the start, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wir3w3o4f1nmbgcxgnx8cj9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Powerpc provides hcall events that also provides insights into guest
behaviour. Enhance perf kvm stat to record and analyze hcall events.
- To trace hcall events :
perf kvm stat record
- To show the results :
perf kvm stat report --event=hcall
The result shows the number of hypervisor calls from the guest grouped
by their respective reasons displayed with the frequency.
This patch makes use of two additional tracepoints
"kvm_hv:kvm_hcall_enter" and "kvm_hv:kvm_hcall_exit". To map the hcall
codes to their respective names, it needs a mapping. Such mapping is
added in this patch in book3s_hcalls.h.
# pgrep qemu
A sample output :
19378
60515
2 VMs running.
# perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]
# perf kvm stat report -p 60515 --event=hcall
Analyze events for all VMs, all VCPUs:
HCALL-EVENT Samples Samples% Time% MinTime MaxTime AvgTime
H_IPI 822 66.08% 88.10% 0.63us 11.38us 2.05us (+- 1.42%)
H_SEND_CRQ 144 11.58% 3.77% 0.41us 0.88us 0.50us (+- 1.47%)
H_VIO_SIGNAL 118 9.49% 2.86% 0.37us 0.83us 0.47us (+- 1.43%)
H_PUT_TERM_CHAR 76 6.11% 2.07% 0.37us 0.90us 0.52us (+- 2.43%)
H_GET_TERM_CHAR 74 5.95% 2.23% 0.37us 1.70us 0.58us (+- 4.77%)
H_RTAS 6 0.48% 0.85% 1.10us 9.25us 2.70us (+-48.57%)
H_PERFMON 4 0.32% 0.12% 0.41us 0.96us 0.59us (+-20.92%)
Total Samples:1244, Total events handled time:1916.69us.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-4-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf kvm can be used to analyze guest exit reasons. This support already
exists in x86. Hence, porting it to powerpc.
- To trace KVM events :
perf kvm stat record
If many guests are running, we can track for a specific guest by using
--pid as in : perf kvm stat record --pid <pid>
- To see the results :
perf kvm stat report
The result shows the number of exits (from the guest context to
host/hypervisor context) grouped by their respective exit reasons with
their frequency.
Since, different powerpc machines have different KVM tracepoints, this
patch discovers the available tracepoints dynamically and accordingly
looks for them. If any single tracepoint is not present, this support
won't be enabled for reporting. To record, this will fail if any of the
events we are looking to record isn't available. Right now, its only
supported on PowerPC Book3S_HV architectures.
To analyze the different exits, group them and present them (in a slight
descriptive way) to the user, we need a mapping between the "exit code"
(dumped in the kvm_guest_exit tracepoint data) and to its related
Interrupt vector description (exit reason). This patch adds this mapping
in book3s_hv_exits.h.
It records on two available KVM tracepoints for book3s_hv:
"kvm_hv:kvm_guest_exit" and "kvm_hv:kvm_guest_enter".
Here is a sample o/p:
# pgrep qemu
19378
60515
2 Guests are running on the host.
# perf kvm stat record -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 4.153 MB perf.data.guest (39624
samples) ]
# perf kvm stat report -p 60515
Analyze events for pid(s) 60515, all VCPUs:
VM-EXIT Samples Samples% Time% MinTime MaxTime Avg time
SYSCALL 9141 63.67% 7.49% 1.26us 5782.39us 9.87us (+- 6.46%)
H_DATA_STORAGE 4114 28.66% 5.07% 1.72us 4597.68us 14.84us (+-20.06%)
HV_DECREMENTER 418 2.91% 4.26% 0.70us 30002.22us 122.58us (+-70.29%)
EXTERNAL 392 2.73% 0.06% 0.64us 104.10us 1.94us (+-18.83%)
RETURN_TO_HOST 287 2.00% 83.11% 1.53us 124240.15us 3486.52us (+-16.81%)
H_INST_STORAGE 5 0.03% 0.00% 1.88us 3.73us 2.39us (+-14.20%)
Total Samples:14357, Total events handled time:1203918.42us.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-3-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes the "const" qualifier from kvm_events_tp declaration
to account for the fact that some architectures may need to update this
variable dynamically. For instance, powerpc will need to update this
variable dynamically depending on the machine type.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-2-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its better to remove the dependency on uapi/kvm_perf.h to allow dynamic
discovery of kvm events (if its needed). To do this, some extern
variables have been introduced with which we can keep the generic
functions generic.
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1453962787-15376-1-git-send-email-hemant@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' knows whether buildid cache is enabled (via
--no-no-buildid-cache) deliberately. Buildid cache can be turned off in
some situations.
Output switching support needs this feature to turn off buildid cache
by default.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-33-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timestamp generation becomes a public available helper. Which will
be used by 'perf record', help it output to split output file based
on time.
For example:
perf.data.2015122620363710
perf.data.2015122620364092
perf.data.2015122620365423
...
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-27-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will Deacon [1] has some question on patch [2]. This patch improves
test__bp_signal so we can test:
1. A watchpoint and a breakpoint that fire on the same instruction
2. Nested signals
Test result:
On x86_64 and ARM64 (result are similar with patch [2] on ARM64):
# ./perf test -v signal
17: Test breakpoint overflow signal handler :
--- start ---
test child forked, pid 10213
count1 1, count2 3, count3 2, overflow 3, overflows_2 3
test child finished with 0
---- end ----
Test breakpoint overflow signal handler: Ok
So at least 2 cases Will doubted are handled correctly.
[1] http://lkml.kernel.org/g/20160104165535.GI1616@arm.com
[2] http://lkml.kernel.org/g/1450921362-198371-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-9-git-send-email-wangnan0@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copying perf to old kernel system results:
# perf test bpf
37: Test BPF filter :
37.1: Test basic BPF filtering : FAILED!
37.2: Test BPF prologue generation : Skip
However, in case when kernel doesn't support a test case it should
return 'Skip', 'FAILED!' should be reserved for kernel tests for when
the kernel supports a feature that then fails to work as advertised.
This patch checks environment before real testcase.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1453715801-7732-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a nasty confusion that, for kernel module, dso->kernel is not
necessary to be DSO_TYPE_KERNEL or DSO_TYPE_GUEST_KERNEL. These two
enums are for vmlinux. See thread [1]. We tried to fix this part but it
is costy.
Code machine__write_buildid_table() is another unfortunate function fall
into this trap that, when issuing buildid event for a kernel module,
cpumode it gives to the event is PERF_RECORD_MISC_USER, not
PERF_RECORD_MISC_KERNEL.
However, even with this bug, most of the time it doesn't causes real
problem. I find this issue when trying to use a perf before commit
3d39ac5386 ("perf machine: No need to have two DSOs lists") to parse a
perf.data generated by newest perf.
[1] https://lkml.org/lkml/2015/9/21/908
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1454089251-203152-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On some architecture the size of the private header may be dependent on
the number of tracers used in the session. As such adding a "struct
perf_evlist *" parameter, which should contain all the required
information.
Also adjusting the existing client of the interface to take the new
parameter into account.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Cc: Mike Leach <mike.leach@arm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin@rab.in>
Cc: Tor Jeremiassen <tor@ti.com>
Link: http://lkml.kernel.org/r/1452807977-8069-22-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'tools/perf/test/make' makefile has in its default, 'all' target
builds that will pollute the source code directory, i.e. that will not
use O= variable.
The 'build-test' should be run as often as possible, preferrably after
each non strictly non-code commit, so speed it up by selecting just
the O= targets.
Furthermore it tests both the Makefile.perf file, that is normally
driven by the main Makefile, and the Makefile, reduce the time in half
by having just MK=Makefile, the most usual, tested by 'build-test'.
Please run:
make -C tools/perf -f tests/make
from time to time for testing also the in-place build tests.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jrt9utscsiqkmjy3ccufostd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To prevent the feature check tests to run repeately, one time per
'tests/make' target/test, this patch utilizes the previously introduced
'feature-dump' make target and FEATURES_DUMP variable, making sure that
the feature checkers run only once when doing build-test for normal test
cases.
However, since standard users doesn't reuse features dump result, we'd
better give an option to check their behaviors. The above feature
should be used to make build-test faster only. Only utilize it for
build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1454068269-235999-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make feature-dump' should give a stable result, so even 'NO_SOMETHING=1'
is given (for babeltrace, if LIBBABELTRACE=1 is not given), we should
try to detect those feature and {C,LD}FLAGS. Build or not should be
controled independent.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1454047050-204993-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I see problem with test-all case speedup, because it does not
comprise checks for 32bits compilations, fix it.
The problem could be noticed by calling:
make -C tools/perf feature-dump
That would end up misdetecting the feature-compile-x32, that, building
using 'gcc -mx32' needs stub headers not present in a fedora 23 devel
machine and thus fail to compile, but ended up appearing as detected,
i.e. present in tools/perf/FEATURE-DUMP as 'feature-compile-x32=1'.
With this fix it correctly appears as 'feature-compile-x32=0' and if we
uninstall the libc devel files for 32 bits (glibc-devel.i686), then the
relevant variable is flipped from 'feature-compile-32=1' to
'feature-compile-32=0'.
The same things happened for bionic and libbabeltrace, that were
misdetected because the are no tested in test-all.c
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u0sjaddf1r9m8icpd98ry7fz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An i386 binary can be linked correctly even without correct headers.
Which causes problem. For exmaple:
$ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak}
$ make tools/perf
Auto-detecting system features:
... dwarf: [ on ]
[SNIP]
GEN common-cmds.h
CC perf-read-vdso32
In file included from /tmp/oxygen_root/usr/include/features.h:388:0,
from /tmp/oxygen_root/usr/include/stdio.h:27,
from perf-read-vdso.c:1:
/tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
# include <gnu/stubs-32.h>
^
compilation terminated.
...
In this patch we checks not only compiler and linker, but also basic
headers in test-compile test case, make it fail on a platform
lacking correct headers.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1453893742-20603-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since it was always checking if the initialization was done, use that
branch to do the initialization if not done already.
With this we reduce the number of exported globals from these files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160125212955.GG22501@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script and data-switch context menu are only meaningful when it
deals with a data file. So add a check so that it cannot be shown when
perf-top is run.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>,
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1453555902-18401-4-git-send-email-namhyung@kernel.org
[ Use goto skip_scripting instead of two is_report_browser() tests ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set FEATURE_TESTS to 'all' so all possible feature checkers are
executed. Without this setting the output feature dump file miss some
feature, for example, liberity. Select all checker so we won't get an
incomplete feature dump file.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-5-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to check both valid and invalid
offsets when using adjtimex's ADJ_SETOFFSET method.
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Harald Hoyer <harald@redhat.com>
Cc: Kay Sievers <kay@vrfy.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Link: http://lkml.kernel.org/r/1453417415-19110-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Put feature checkers not in original FEATURE_TESTS to a new list and
allow subproject select all feature checkers by setting FEATURE_TESTS to
'all'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa