- Constify a few variables in DM core and DM integrity
- Add bufio optimization and checksum failure accounting to DM integrity
- Fix DM integrity to avoid checking integrity of failed reads
- Fix DM integrity to use init_completion
- A couple DM log-writes target fixes
- Simplify DAX flushing by eliminating the unnecessary flush abstraction
that was stood up for DM's use.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZuo8UAAoJEMUj8QotnQNa5BEIANO4mHh1nrzEbH72a4RCLgxV
H1Pk1zZx/W1bhOOmcRRhxCSM85dPgsCegc5EmpwLZEMavQrP9UZblHcYOUsyIx7W
S/lWa+soOq/5N2OveROc4WdoWVs50UFmc1+BcClc4YrEe+15XC3R0VMkjX2b/hUL
o2eYhPjpMlgaorMtRRU6MAooo2fBRQ9m05aPeVgd35fxibrE7PZm+EYW09wa0STi
9ufuDXJf8+TtFP/38BD41LbUEskuHUZTSDeAJ+3DBaTtfEZcZYxsst4P9JangsHx
jqqqI9aYzFD2a27fl9WLhCvm40YFiKp5nwzED0RZjzWxVa/jTShX7a49BdzTTfw=
=rkSB
-----END PGP SIGNATURE-----
Merge tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Some request-based DM core and DM multipath fixes and cleanups
- Constify a few variables in DM core and DM integrity
- Add bufio optimization and checksum failure accounting to DM
integrity
- Fix DM integrity to avoid checking integrity of failed reads
- Fix DM integrity to use init_completion
- A couple DM log-writes target fixes
- Simplify DAX flushing by eliminating the unnecessary flush
abstraction that was stood up for DM's use.
* tag 'for-4.14/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dax: remove the pmem_dax_ops->flush abstraction
dm integrity: use init_completion instead of COMPLETION_INITIALIZER_ONSTACK
dm integrity: make blk_integrity_profile structure const
dm integrity: do not check integrity for failed read operations
dm log writes: fix >512b sectorsize support
dm log writes: don't use all the cpu while waiting to log blocks
dm ioctl: constify ioctl lookup table
dm: constify argument arrays
dm integrity: count and display checksum failures
dm integrity: optimize writing dm-bufio buffers that are partially changed
dm rq: do not update rq partially in each ending bio
dm rq: make dm-sq requeuing behavior consistent with dm-mq behavior
dm mpath: complain about unsupported __multipath_map_bio() return values
dm mpath: avoid that building with W=1 causes gcc 7 to complain about fall-through
Commit abebfbe2f7 ("dm: add ->flush() dax operation support") is
buggy. A DM device may be composed of multiple underlying devices and
all of them need to be flushed. That commit just routes the flush
request to the first device and ignores the other devices.
It could be fixed by adding more complex logic to the device mapper. But
there is only one implementation of the method pmem_dax_ops->flush - that
is pmem_dax_flush() - and it calls arch_wb_cache_pmem(). Consequently, we
don't need the pmem_dax_ops->flush abstraction at all, we can call
arch_wb_cache_pmem() directly from dax_flush() because dax_dev->ops->flush
can't ever reach anything different from arch_wb_cache_pmem().
It should be also pointed out that for some uses of persistent memory it
is needed to flush only a very small amount of data (such as 1 cacheline),
and it would be overkill if we go through that device mapper machinery for
a single flushed cache line.
Fix this by removing the pmem_dax_ops->flush abstraction and call
arch_wb_cache_pmem() directly from dax_flush(). Also, remove the device
mapper code that forwards the flushes.
Fixes: abebfbe2f7 ("dm: add ->flush() dax operation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The new lockdep support for completions causeed the stack usage
in dm-integrity to explode, in case of write_journal from 504 bytes
to 1120 (using arm gcc-7.1.1):
drivers/md/dm-integrity.c: In function 'write_journal':
drivers/md/dm-integrity.c:827:1: error: the frame size of 1120 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
The problem is that not only the size of 'struct completion' grows
significantly, but we end up having multiple copies of it on the stack
when we assign it from a local variable after the initial declaration.
COMPLETION_INITIALIZER_ONSTACK() is the right thing to use when we
want to declare and initialize a completion on the stack. However,
this driver doesn't do that and instead initializes the completion
just before it is used.
In this case, init_completion() does the same thing more efficiently,
and drops the stack usage for the function above down to 496 bytes.
While the other functions in this file are not bad enough to cause
a warning, they benefit equally from the change, so I do the change
across the entire file. In the one place where we reuse a completion,
I picked the cheaper reinit_completion() over init_completion().
Fixes: cd8084f91c ("locking/lockdep: Apply crossrelease to completions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Make this structure const as it is only stored in the profile field of a
blk_integrity structure. This field is of type const, so make structure
as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Even though read operations fail, dm_integrity_map_continue() calls
integrity_metadata() to check integrity. In this case, just complete
these.
This also makes it so read I/O errors do not generate integrity warnings
in the kernel log.
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <cheol.lee@lge.com>
Acked-by: Milan Broz <gmazyland@gmail.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
512b sectors vs device's physical sectorsize was not maintained
consistently and as such the support for >512b sector devices has bugs.
The log metadata expects native sectorsize but 512b sectors were being
stored. Also, device's sectorsize was assumed when assigning the
bi_sector for blocks that were being logged.
Fix this up by adding two helpers to convert between bio and dev
sectors, and use these in the appropriate places to fix the problem and
make it clear which units go where. Doing so allows dm-log-writes use
with 4k devices.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The check to see if the logging kthread needs to go to sleep is wrong,
it checks lc->pending_blocks, which will be non-0 if there are any
blocks that are pending, whether they are ready to be logged or not.
What we really want is to go to sleep until it's time to log blocks, so
change this check so we do actually go to sleep in between flushes.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Pull followup block layer updates from Jens Axboe:
"I ended up splitting the main pull request for this series into two,
mainly because of clashes between NVMe fixes that went into 4.13 after
the for-4.14 branches were split off. This pull request is mostly
NVMe, but not exclusively. In detail, it contains:
- Two pull request for NVMe changes from Christoph. Nothing new on
the feature front, basically just fixes all over the map for the
core bits, transport, rdma, etc.
- Series from Bart, cleaning up various bits in the BFQ scheduler.
- Series of bcache fixes, which has been lingering for a release or
two. Coly sent this in, but patches from various people in this
area.
- Set of patches for BFQ from Paolo himself, updating both
documentation and fixing some corner cases in performance.
- Series from Omar, attempting to now get the 4k loop support
correct. Our confidence level is higher this time.
- Series from Shaohua for loop as well, improving O_DIRECT
performance and fixing a use-after-free"
* 'for-4.14/block-postmerge' of git://git.kernel.dk/linux-block: (74 commits)
bcache: initialize dirty stripes in flash_dev_run()
loop: set physical block size to logical block size
bcache: fix bch_hprint crash and improve output
bcache: Update continue_at() documentation
bcache: silence static checker warning
bcache: fix for gc and write-back race
bcache: increase the number of open buckets
bcache: Correct return value for sysfs attach errors
bcache: correct cache_dirty_target in __update_writeback_rate()
bcache: gc does not work when triggering by manual command
bcache: Don't reinvent the wheel but use existing llist API
bcache: do not subtract sectors_to_gc for bypassed IO
bcache: fix sequential large write IO bypass
bcache: Fix leak of bdev reference
block/loop: remove unused field
block/loop: fix use after free
bfq: Use icq_to_bic() consistently
bfq: Suppress compiler warnings about comparisons
bfq: Check kstrtoul() return value
bfq: Declare local functions static
...
Pull MD updates from Shaohua Li:
"This update mainly fixes bugs:
- Make raid5 ppl support several ppl from Pawel
- Several raid5-cache bug fixes from Song
- Bitmap fixes from Neil and Me
- One raid1/10 regression fix since 4.12 from Me
- Other small fixes and cleanup"
* tag 'md/4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/bitmap: disable bitmap_resize for file-backed bitmaps.
raid5-ppl: Recovery support for multiple partial parity logs
md: Runtime support for multiple ppls
md/raid0: attach correct cgroup info in bio
lib/raid6: align AVX512 constants to 512 bits, not bytes
raid5: remove raid5_build_block
md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_show
md: replace seq_release_private with seq_release
md: notify about new spare disk in the container
md/raid1/10: reset bio allocated from mempool
md/raid5: release/flush io in raid5_do_work()
md/bitmap: copy correct data for bitmap super
bcache uses a Proportion-Differentiation Controller algorithm to control
writeback rate to cached devices. In the PD controller algorithm, dirty
stripes of thin flash device should not be counted in, because flash only
volumes never write back dirty data.
Currently dirty stripe counter for thin flash device is not initialized
when the thin flash device starts. Which means the following calculation
in PD controller will reference an undefined dirty stripes number, and
all cached devices attached to the same cache set where the thin flash
device lies on may have an inaccurate writeback rate.
This patch calles bch_sectors_dirty_init() in flash_dev_run(), to
correctly initialize dirty stripe counter when the thin flash device
starts to run. This patch also does following parameter data type change,
-void bch_sectors_dirty_init(struct cached_dev *dc);
+void bch_sectors_dirty_init(struct bcache_device *);
to call this function conveniently in flash_dev_run().
(Commit log is composed by Coly Li)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Most importantly, solve a crash where %llu was used to format signed
numbers. This would cause a buffer overflow when reading sysfs
writeback_rate_debug, as only 20 bytes were allocated for this and
%llu writes 20 characters plus a null.
Always use the units mechanism rather than having different output
paths for simplicity.
Also, correct problems with display output where 1.10 was a larger
number than 1.09, by multiplying by 10 and then dividing by 1024 instead
of dividing by 100. (Remainders of >= 1000 would print as .10).
Minor changes: Always display the decimal point instead of trying to
omit it based on number of digits shown. Decide what units to use
based on 1000 as a threshold, not 1024 (in other words, always print
at most 3 digits before the decimal point).
Signed-off-by: Michael Lyle <mlyle@lyle.org>
Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
continue_at() doesn't have a return statement anymore.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In olden times, closure_return() used to have a hidden return built in.
We removed the hidden return but forgot to add a new return here. If
"c" were NULL we would oops on the next line, but fortunately "c" is
never NULL. Let's just remove the if statement.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In currently, we only alloc 6 open buckets for each cache set,
but in usually, we always attach about 10 or so backend devices for
each cache set, and the each bcache device are always accessed by
about 10 or so threads in top application layer. So 6 open buckets
are too few, It has led to that each of the same thread write data
to different buckets, which would cause low efficiency write-back,
and also cause buckets inefficient, and would be Very easy to run
out of.
I add debug message in bch_open_buckets_alloc() to print alloc bucket
info, and test with ten bcache devices with a cache set, and each
bcache device is accessed by ten threads.
From the debug message, we can see that, after the modification, One
bucket is more likely to assign to the same thread, and the data from
the same thread are more likely to write the same bucket. Usually the
same thread always write/read the same backend device, so it is good
for write-back and also promote the usage efficiency of buckets.
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If you encounter any errors in bch_cached_dev_attach it will return
a negative error code. The variable 'v' which stores the result is
unsigned, thus user space sees a very large value returned for bytes
written which can cause incorrect user space behavior. Utilize 1
signed variable to use throughout the function to preserve error return
capability.
Signed-off-by: Tony Asleson <tasleson@redhat.com>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__update_write_rate() uses a Proportion-Differentiation Controller
algorithm to control writeback rate. A dirty target number is used in
this PD controller to control writeback rate. A larger target number
will make the writeback rate smaller, on the versus, a smaller target
number will make the writeback rate larger.
bcache uses the following steps to calculate the target number,
1) cache_sectors = all-buckets-of-cache-set * buckets-size
2) cache_dirty_target = cache_sectors * cached-device-writeback_percent
3) target = cache_dirty_target *
(sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set)
The calculation at step 1) for cache_sectors is incorrect, which does
not consider dirty blocks occupied by flash only volume.
A flash only volume can be took as a bcache device without cached
device. All data sectors allocated for it are persistent on cache device
and marked dirty, they are not touched by bcache writeback and garbage
collection code. So data blocks of flash only volume should be ignore
when calculating cache_sectors of cache set.
Current code does not subtract dirty sectors of flash only volume, which
results a larger target number from the above 3 steps. And in sequence
the cache device's writeback rate is smaller then a correct value,
writeback speed is slower on all cached devices.
This patch fixes the incorrect slower writeback rate by subtracting
dirty sectors of flash only volumes in __update_writeback_rate().
(Commit log composed by Coly Li to pass checkpatch.pl checking)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I try to execute the following command to trigger gc thread:
[root@localhost internal]# echo 1 > trigger_gc
But it does not work, I debug the code in gc_should_run(), It works only
if in invalidating or sectors_to_gc < 0. So set sectors_to_gc to -1 to
meet the condition when we trigger gc by manual command.
(Code comments aded by Coly Li)
Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although llist provides proper APIs, they are not used. Make them used.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to
trigger gc thread.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sequential write IOs were tested with bs=1M by FIO in writeback cache
mode, these IOs were expected to be bypassed, but actually they did not.
We debug the code, and find in check_should_bypass():
if (!congested &&
mode == CACHE_MODE_WRITEBACK &&
op_is_write(bio_op(bio)) &&
(bio-＞bi_opf & REQ_SYNC))
goto rescale
that means, If in writeback mode, a write IO with REQ_SYNC flag will not
be bypassed though it is a sequential large IO, It's not a correct thing
to do actually, so this patch remove these codes.
Signed-off-by: tang.junhui <tang.junhui@zte.com.cn>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If blkdev_get_by_path() in register_bcache() fails, we try to lookup the
block device using lookup_bdev() to detect which situation we are in to
properly report error. However we never drop the reference returned to
us from lookup_bdev(). Fix that.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bitmap_resize() does not work for file-backed bitmaps.
The buffer_heads are allocated and initialized when
the bitmap is read from the file, but resize doesn't
read from the file, it loads from the internal bitmap.
When it comes time to write the new bitmap, the bh is
non-existent and we crash.
The common case when growing an array involves making the array larger,
and that normally means making the bitmap larger. Doing
that inside the kernel is possible, but would need more code.
It is probably easier to require people who use file-backed
bitmaps to remove them and re-add after a reshape.
So this patch disables the resizing of arrays which have
file-backed bitmaps. This is better than crashing.
Reported-by: Zhilong Liu <zlliu@suse.com>
Fixes: d60b479d17 ("md/bitmap: add bitmap_resize function to allow bitmap resizing.")
Cc: stable@vger.kernel.org (v3.5+).
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Constify the lookup table for device-mapper ioctls so that it is placed
in .rodata.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The arrays of 'struct dm_arg' are never modified by the device-mapper
core, so constify them so that they are placed in .rodata.
(Exception: the args array in dm-raid cannot be constified because it is
allocated on the stack and modified.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This changes DM integrity to count the number of checksum failures and
report the counter in response to STATUSTYPE_INFO request (via 'dmsetup
status').
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rather than write the entire dm-bufio buffer when only a subset is
changed, improve dm-bufio (and dm-integrity) by only writing the subset
of the buffer that changed.
Update dm-integrity to make use of dm-bufio's new
dm_bufio_mark_partial_buffer_dirty() interface.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Search PPL buffer in order to find out the latest PPL header (the one
with largest generation number) and use it for recovery. The PPL entry
format and recovery algorithm are the same as for single PPL approach.
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Increase PPL area to 1MB and use it as circular buffer to store PPL. The
entry with highest generation number is the latest one. If PPL to be
written is larger then space left in a buffer, rewind the buffer to the
start (don't wrap it).
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
We don't need to update the original dm request partially when ending
each cloned bio: just update original dm request once when the whole
cloned request is finished. This still allows full support for partial
completion because a new 'completed' counter accounts for incremental
progress as the clone bios complete.
Partial request update can be a bit expensive, so we should try to avoid
it, especially because it is run in softirq context.
Avoiding all the partial request updates fixes both hard lockup and
soft lockups that were easily reproduced while running Laurence's
test[1] on IB/SRP.
BTW, after d4acf3650c ("block: Make blk_mq_delay_kick_requeue_list()
rerun the queue at a quiet time"), we need to make the test more
aggressive for reproducing the lockup:
1) run hammer_write.sh 32 or 64 concurrently.
2) write 8M each time
[1] https://marc.info/?l=linux-block&m=150220185510245&w=2
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
DM_MAPIO_DELAY_REQUEUE causes dm-mq to requeue after a delay but
causes dm-sq to requeue immediately. Make the behavior of dm-sq
consistent with that of dm-mq.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
WARN_ONCE() if __multipath_map_bio() returns an unsupported return value.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When using the block layer in single queue mode, get_request()
returns ERR_PTR(-EAGAIN) if the queue is dying and the REQ_NOWAIT
flag has been passed to get_request(). Avoid that the kernel
reports soft lockup complaints in this case due to continuous
requeuing activity.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Using the same rate limiting state for different kinds of messages
is wrong because this can cause a high frequency message to suppress
a report of a low frequency message. Hence use a unique rate limiting
state per message type.
Fixes: 71a16736a1 ("dm: use local printk ratelimit")
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Retry requests instead of failing them if an out-of-memory error occurs
or the block driver below dm-mpath is busy. This restores the v4.12
behavior of noretry_error(), namely that -ENOMEM results in a retry.
Fixes: 2a842acab1 ("block: introduce new block status code type")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Now raid5_build_block is just called to set the
sector of r5dev, raid5_compute_blocknr can be
used directly for the purpose.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In r5c_journal_mode_show(), it is necessary to call mddev_lock()
before accessing conf and conf->log. Otherwise, the conf->log
may change (and become NULL).
Signed-off-by: Song Liu <songliubraving@fb.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Since commit f15146380d ("fs: seq_file - add event counter to simplify
poll() support"), md.c code has been no longer used the private field of
the struct seq_file, but seq_release_private() has been continued to be
used to release the allocated seq_file. This seems to have been
forgotten. So convert it to use seq_release() instead of
seq_release_private().
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In case of external metadata arrays spare disks are added to containers
first. mdadm keeps monitoring /proc/mdstat output and when spare disk is
available, it moves it from the container to the array. The problem is
there is no notification of new spare disk in the container and mdadm
waits a long time (until timeout) before it takes the action.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Data allocated from mempool doesn't always get initialized, this happens when
the data is reused instead of fresh allocation. In the raid1/10 case, we must
reinitialize the bios.
Reported-by: Jonathan G. Underwood <jonathan.underwood@gmail.com>
Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages)
Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages)
Cc: stable@vger.kernel.org (4.12+)
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In raid5, there are scenarios where some ios are deferred to a later
time, and some IO need a flush to complete. To make sure we make
progress with these IOs, we need to call the following functions:
flush_deferred_bios(conf);
r5l_flush_stripe_to_raid(conf->log);
Both of these functions are called in raid5d(), but missing in
raid5_do_work(). As a result, these functions are not called
when multi-threading (group_thread_cnt > 0) is enabled. This patch
adds calls to these function to raid5_do_work().
Note for stable branches:
r5l_flush_stripe_to_raid(conf->log) is need for 4.4+
flush_deferred_bios(conf) is only needed for 4.11+
Cc: stable@vger.kernel.org (4.4+)
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
raid5 cache could write bitmap superblock before bitmap superblock is
initialized. The bitmap superblock is less than 512B. The current code will
only copy the superblock to a new page and write the whole 512B, which will
zero the the data after the superblock. Unfortunately the data could include
bitmap, which we should preserve. The patch will make superblock read do 4k
chunk and we always copy the 4k data to new page, so the superblock write will
old data to disk and we don't change the bitmap.
Reported-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Cc: stable@vger.kernel.org (4.10+)
Signed-off-by: Shaohua Li <shli@fb.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer always remaps partitions before calling into the
->make_request methods of drivers. Thus the call to get_start_sect in
in_chunk_boundary will always return 0 and can be removed.
Reviewed-by: Shaohua Li <shli@fb.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds