Commit Graph

4718 Commits

Author SHA1 Message Date
Linus Torvalds a409ed156a This is the bulk of the GPIO changes for the v5.11 kernel cycle:
Core changes:
 
 - Retired the old set-up function for GPIO IRQ chips. All chips
   now use the template struct gpio_irq_chip and pass that to the core
   to be set up alongside the gpio_chip. We can finally get rid of
   the old cruft.
 
 - Some refactoring and clean up of the core code.
 
 - Support edge event timestamps to be stamped using REALTIME
   (wall clock) timestamps. We have found solid use cases for
   this, so we support it.
 
 New drivers:
 
 - MStar MSC313 GPIO driver.
 
 - HiSilicon GPIO driver.
 
 Driver improvements:
 
 - The PCA953x driver now also supports the NXP PCAL9554B/C chips.
 
 - The mockup driver can now be probed from the device tree which
   is pretty useful for virtual prototyping of devices.
 
 - The Rcar driver now supports .get_multiple()
 
 - The MXC driver dropped some legacy and became a pure device
   tree client.
 
 - The Exar driver was moved over to the IDA interface for
   enumerating, and also switched over to using regmap for
   register access.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/b0r0ACgkQQRCzN7AZ
 XXPRIQ/+P2VxypIIi8o5ZJLt/UN1CPGbh10WCl9yR95pM7Ekxocsa05MMAyPCbCA
 SzDSo4wfrbVLd+C8oqGyLcyxR4A8LQDoc/MaBUC60SDr/BY2eu6bRCs9UttWUPUN
 59H0r/dMAcSpIXwB9A7dKmF7Ps1Lz9naeZiGV8vw8hmuN4h3RtsWd10h8WDhByoq
 RA099lNKs6pFpx61hvn+6mr8ewkm6RFh9q9/eg+zU0gVeaXpYLO6zHTnRS3dARIg
 9qLZ54mRUAeybpUCi+CpleUM7qQI8wYHB7pJutAXByWVACie91P5youJv2JvMgs3
 rvYyjRkHkM+EtpyXStv5zzfIi0JF746zWeeQmrR3bYy7prnIjjkUgIZb2Jmqu0p2
 R0PAOmylociuSsEpARIqlGebqMKlmpsekuhJsf8x53le3nM4B2qC6fVEXFfYrp2L
 sTfxeejmIFBBLLSSbfBFQOk3La9YBURGsidqgA2lQXL1ZSVhV6UrfblyLET6cOgs
 y4ORYCV4SxeErUhePkA0GXjnu00nC9iD2Too6sTF+oRIirXX3R4SBbgoHKBEhMNe
 /CWjYduwg7SkqwdeaBpZNU9jpFqq8Rny6nid13FMFORJWAszECzxcBIUaN55S/98
 Z8QD0DJNo9nJZdtwT7OYE+x7/QcxgIHClU5MsrXS4yf3SlZHbAk=
 =nrFU
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of the GPIO changes for the v5.11 kernel cycle:

  Core changes:

   - Retired the old set-up function for GPIO IRQ chips. All chips now
     use the template struct gpio_irq_chip and pass that to the core to
     be set up alongside the gpio_chip. We can finally get rid of the
     old cruft.

   - Some refactoring and clean up of the core code.

   - Support edge event timestamps to be stamped using REALTIME (wall
     clock) timestamps. We have found solid use cases for this, so we
     support it.

  New drivers:

   - MStar MSC313 GPIO driver.

   - HiSilicon GPIO driver.

  Driver improvements:

   - The PCA953x driver now also supports the NXP PCAL9554B/C chips.

   - The mockup driver can now be probed from the device tree which is
     pretty useful for virtual prototyping of devices.

   - The Rcar driver now supports .get_multiple()

   - The MXC driver dropped some legacy and became a pure device tree
     client.

   - The Exar driver was moved over to the IDA interface for
     enumerating, and also switched over to using regmap for register
     access"

* tag 'gpio-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
  MAINTAINERS: Remove reference to non-existing file
  gpio: hisi: Do not require ACPI for COMPILE_TEST
  MAINTAINERS: Add maintainer for HiSilicon GPIO driver
  gpio: gpio-hisi: Add HiSilicon GPIO support
  gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
  gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
  dt-bindings: mt7621-gpio: convert bindings to YAML format
  gpiolib: cdev: Flag invalid GPIOs as used
  gpio: put virtual gpio device into their own submenu
  drivers: gpio: amd8111: use SPDX-License-Identifier
  drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
  drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
  gpio: Add TODO item for debugfs interface
  gpio: just plain warning when nonexisting gpio requested
  tools: gpio: add option to report wall-clock time to gpio-event-mon
  tools: gpio: add support for reporting realtime event clock to lsgpio
  gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
  gpio: msc313: MStar MSC313 GPIO driver
  dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  ...
2020-12-17 18:07:20 -08:00
Linus Torvalds 278f54c461 - New Drivers
- Add support for Intel's Platform Monitoring Technology (PMT)
 
  - New Device Support
    - Add support for PM660/PM660L to QCom SPMI PMIC
    - Add support for lots of new devices to Kontron Core
 
  - New Functionality
    - Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API
 
  - Fix-ups
    - Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
                stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
    - Remove superfluous code; madera, tps65910
    - Use raw APIs (rid abstractions); tps65911-comparator, tps65910
    - Whitespace/formatting fix-ups; tps65910
    - Device Tree changes/updates; bd71837-pmic, syscon
    - Use helpers/APIs (no hand rolling); altera-sysmgr
    - Mark of_match tables as __maybe_unused; twl6030-irq
    - Fix spelling; si476x-core
 
  - Bug Fixes
    - Reset on resume to ensure known state; madera-core
    - Correct ordering issues; madera-core, tps65910, kempld-core
    - Remove erroneous passing of of_compatible strings; at91-usart
    - Fix potential I2C adaptor leak; htc-i2cpld
    - Correct errorneous defines; rt5033-private
    - Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
    - Fix dev_err_probe() handling; stmfx
    - Repair interrupt regression; motorola-cpcap
    - Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
                                        fsl-imx25-tsadc, max77650,
 				       mt6397-core, rt5033, stmfx,
 				       max77686, sun4i-gpadc,
 				       wm8994-core, axp20x-i2c
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAl/ZunYACgkQUa+KL4f8
 d2GDQhAAj8ykIJOerbw8wxO/Lt4jCsbrqIX0/fnKfmDTuJ/K18F7Hox6BNEgte7l
 SIC45b7O6RCT6w7jMTX+ml2QFKcUf4cR3lHHDerWSITCP05VKqtktmQF3bN+mATZ
 QafN9uhV1E6BGPebRFAMllUTee4Il+7iZR+g8lxYl4AVKpSpGoi9J2H2VLHTDGLC
 hOq7glkpt02rQYRnIdNj0Jm/IBvnDAhJeTeexw41P9bpbnC6jiXAJsgApNduUazm
 TjfZBUGUIOQssWe6wdr4+v3L+OmKfj9STdJCUOAat9CbarQYDHxBHuSOPk8Q5kVY
 LQ3WkV1xdUmLldUmmt/eGn1EgIZb5VbfStrXF8Ih2PSitAKlocmtdu67W4SPX06B
 baZcgQ11qPfmecF6NEUEB9BEBPiwuEp+9Hfxmv3EjyN++AnD7sytFou4KP6d3uHL
 PC4dK5hHPYMSdl2irFJgxyXOVjglULp/ukwYG4cO6rzKbxYKZAkclXk5vdWhBlJd
 NnL+OgByRdTO6fimMDlauUAkrI/xgx0YmK0WTzFtSchc0GRkiCR/yME13pYaNktE
 drQLNTNm8NXRh3bfN0HNpZxa1wlLY2lF2p3hEFMUloaCulYtXiL3hCIkTQ6iN+c+
 1xwYDaj1Gxg37O7KRp3PAJBwDcZsO54FMRZu9FGA5vhanW000sY=
 =Qp9q
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - Add support for Intel's Platform Monitoring Technology (PMT)

  New Device Support:
   - Add support for PM660/PM660L to QCom SPMI PMIC
   - Add support for lots of new devices to Kontron Core

  New Functionality:
   - Provide syscon_regmap_lookup_by_phandle_optional() to SysCon API

  Fix-ups:
   - Constify; da9xxx-core; intel_*, tps65xxx, wm8xxx-core, lp8788,
     stmpe, sun4i-gpadc, 88pm800, hi655x-pmic, ioc3, etc
   - Remove superfluous code; madera, tps65910
   - Use raw APIs (rid abstractions); tps65911-comparator, tps65910
   - Whitespace/formatting fix-ups; tps65910
   - Device Tree changes/updates; bd71837-pmic, syscon
   - Use helpers/APIs (no hand rolling); altera-sysmgr
   - Mark of_match tables as __maybe_unused; twl6030-irq
   - Fix spelling; si476x-core

  Bug Fixes:
   - Reset on resume to ensure known state; madera-core
   - Correct ordering issues; madera-core, tps65910, kempld-core
   - Remove erroneous passing of of_compatible strings; at91-usart
   - Fix potential I2C adaptor leak; htc-i2cpld
   - Correct errorneous defines; rt5033-private
   - Resolve Kconfig issues; MFD_SL28CPLD, MFD_OMAP_USB_HOST
   - Fix dev_err_probe() handling; stmfx
   - Repair interrupt regression; motorola-cpcap
   - Allow ACPI matching of DT tables; bcm590xx, da9xx, ene-kb3930,
     fsl-imx25-tsadc, max77650, mt6397-core, rt5033, stmfx, max77686,
     sun4i-gpadc, wm8994-core, axp20x-i2c"

[ The PMT updates already came in through the x86 platform tree ]

* tag 'mfd-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (48 commits)
  mfd: kempld-core: Add support for additional devices
  mfd: si476x-core.h: Fix "regulator" spelling in comment
  mfd: twl6030: Mark of_device_id table as maybe unused
  mfd: axp20x: Skip of_device_id table when !CONFIG_OF
  mfd: wm8994: Drop of_match_ptr from of_device_id table
  mfd: sun4i: Drop of_match_ptr from of_device_id table
  mfd: max77686: Drop of_match_ptr from of_device_id table
  mfd: stmfx: Drop of_match_ptr from of_device_id table
  mfd: rt5033: Drop of_match_ptr from of_device_id table
  mfd: mt6397: Drop of_match_ptr from of_device_id table
  mfd: max77650: Drop of_match_ptr from of_device_id table
  mfd: fsl-imx25: Drop of_match_ptr from of_device_id table
  mfd: ene-kb3930: Drop of_match_ptr from of_device_id table
  mfd: da9150: Drop of_match_ptr from of_device_id table
  mfd: da9063: Drop of_match_ptr from of_device_id table
  mfd: da9062: Drop of_match_ptr from of_device_id table
  mfd: da9055: Drop of_match_ptr from of_device_id table
  mfd: bcm590xx: Drop of_match_ptr from of_device_id table
  mfd: omap-usb: Depend on COMMON_CLK to fix compile tests
  mfd: kempld-core: Check for DMI definition before ACPI
  ...
2020-12-16 14:48:32 -08:00
Andy Shevchenko 72db5d54d7 gpio: hisi: Do not require ACPI for COMPILE_TEST
Make it clear that ACPI needs to be present only to get driver functional.
It is not required for compilation.

Fixes: 356b01a986 ("gpio: gpio-hisi: Add HiSilicon GPIO support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20201214165524.43843-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-16 21:57:46 +01:00
Luo Jiaxing 80e493d2b7 MAINTAINERS: Add maintainer for HiSilicon GPIO driver
Here add maintainer information for HiSilicon GPIO driver.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-3-git-send-email-luojiaxing@huawei.com
[Dropped some dead code when applying]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-16 21:57:27 +01:00
Luo Jiaxing 356b01a986 gpio: gpio-hisi: Add HiSilicon GPIO support
This GPIO driver is for HiSilicon's ARM SoC.

HiSilicon's GPIO controller support double-edge interrupt and multi-core
concurrent access.

ACPI table example for this GPIO controller:
Device (GPO0)
{
	Name (_HID, "HISI0184")
	Device (PRTA)
	{
		Name (_ADR, Zero)
		Name (_UID, Zero)
		Name (_DSD, Package (0x01)
		{
			Package (0x02)
			{
				"ngpios",
				0x20
			}
		})
	}
}

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Link: https://lore.kernel.org/r/1607934255-52544-2-git-send-email-luojiaxing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-14 10:10:27 +01:00
Zheng Yongjun 9777d0bfda gpio: cs5535: Simplify the return expression of cs5535_gpio_probe()
Simplify the return expression.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201210135609.1372-1-zhengyongjun3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12 01:37:46 +01:00
Nikita Shubin 9d55221995 gpiolib: irq hooks: fix recursion in gpiochip_irq_unmask
irqchip shared with multiple gpiochips, leads to recursive call of
gpiochip_irq_mask/gpiochip_irq_unmask which was assigned to
rqchip->irq_mask/irqchip->irq_unmask, these happens becouse of
only irqchip->irq_enable == gpiochip_irq_enable is checked.

Let's add an additional check to make sure shared irqchip is detected
even if irqchip->irq_enable wasn't defined.

Fixes: a8173820f4 ("gpio: gpiolib: Allow GPIO IRQs to lazy disable")
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Link: https://lore.kernel.org/r/20201210070514.13238-1-nikita.shubin@maquefel.me
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-12 00:25:48 +01:00
Linus Walleij 40b37008eb gpio updates for v5.11-rc1
- several refactoring patches of the core gpiolib code
 - add support for NXP PCAL9554B/C to gpio-pca953x
 - allow probing mockup devices from device tree
 - refactoring and improvements to gpio-rcar
 - improvements to locking in gpio-tegra
 - code shrink in gpiolib devres
 - get the irq offset from device tree in gpio-sifive
 - major refactoring of gpio-exar
 - convert gpio-mvebu pwm access to regmap
 - create a new submenu for virtual GPIO drivers
 - fix clang fall-through warnings treewide
 - minor driver refactoring and tweaks sprinkled all over
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl/QnM8ACgkQEacuoBRx
 13LkDw/+NKHc32hKgMJmSsLLFHgZ8XB+7Y775G5Ejxj+4Z0hVY9LdqL0zSYwrzCg
 D2dKwrKMtM83T8vf0bVbPdZ/9uuqrljvocGYt2CFmDqQa3sSlJkyDiSak2HAqjK/
 p9cgDQaUIlDrg2xh/1kSqELQoONmp4m82i++bItIwxIqAwPWfjSHVD7EQznDu0QD
 MJ7eYSuVlpeBhMwfyGCYSuUFhd4wN+nTkLTYw3nNlU4PHCKpdgYd7SBCJjSsLAhM
 8FOQ+PBspS6t8lPIEa4Mt+TOWUbbboGUBy40GPNU8QcUjbzj3TwPIBJu/0SIdSOy
 fBrk+GRjWtJ9shSlz0WQ19mG+qMjIiw4xLY1Jh3Tr4b75bQ3a4pk50aPWNE6bbHV
 NP1wZer/s06f1TQFKjfuDVFsOoRLyrTuOzlW0COAHoqFOdgimZi36xtjaS3AL3lE
 POBiBxFo9VaQ0enD99QMBt3940IP3ekRmlqRxeR1t8C0gE5np8IMZ5Dti8Fh4eCN
 hUQTDDuWQadluOdhMdLCBh5cA3VfZY8xksAMBzAYnSUHzM2D8TcKVjfJeegCEuZd
 kapAV3nLUv1/ZU36okFpMaHaKBL+xGDv8gtV2ro7rptkm6khNPQ3hxKvRbCRCG+S
 fO6IKThwozZEL/uVvsZLRKvN47g89oAGYYfasqq49932WChVKf8=
 =RmnM
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel

gpio updates for v5.11-rc1

- several refactoring patches of the core gpiolib code
- add support for NXP PCAL9554B/C to gpio-pca953x
- allow probing mockup devices from device tree
- refactoring and improvements to gpio-rcar
- improvements to locking in gpio-tegra
- code shrink in gpiolib devres
- get the irq offset from device tree in gpio-sifive
- major refactoring of gpio-exar
- convert gpio-mvebu pwm access to regmap
- create a new submenu for virtual GPIO drivers
- fix clang fall-through warnings treewide
- minor driver refactoring and tweaks sprinkled all over
2020-12-09 15:17:24 +01:00
Marc Zyngier a0db197f53 gpiolib: cdev: Flag invalid GPIOs as used
When reporting the state of a GPIO to userspace, we never check
for the actual validity of the line, meaning we report invalid
lines as being usable. A subsequent request will fail though,
which is an inconsistent behaviour from a userspace perspective.

Instead, let's check for the validity of the line and report it
as used if it is invalid. This allows a tool such as gpioinfo
to report something sensible:

gpiochip3 - 4 lines:
	line   0:      unnamed       unused   input  active-high
	line   1:      unnamed       kernel   input  active-high [used]
	line   2:      unnamed       kernel   input  active-high [used]
	line   3:      unnamed       unused   input  active-high

In this example, lines 1 and 2 are invalid, and cannot be used by
userspace.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201204164739.781812-2-maz@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09 10:23:04 +01:00
Chunyan Zhang 263ade7166 gpio: eic-sprd: break loop when getting NULL device resource
EIC controller have unfixed numbers of banks on different Spreadtrum SoCs,
and each bank has its own base address, the loop of getting there base
address in driver should break if the resource gotten via
platform_get_resource() is NULL already. The later ones would be all NULL
even if the loop continues.

Fixes: 25518e024e ("gpio: Add Spreadtrum EIC driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20201209055106.840100-1-zhang.lyra@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-09 09:41:49 +01:00
Enrico Weigelt, metux IT consult b5252196d0 gpio: put virtual gpio device into their own submenu
Since we already have a few virtual GPIO drivers, and more to come,
this category deserves its own submenu.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-08 10:13:51 +01:00
Enrico Weigelt, metux IT consult 37ddba0245 drivers: gpio: amd8111: use SPDX-License-Identifier
Prefer SPDX-License-Identifier over hand-written texts.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201203182423.5499-3-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-08 09:41:32 +01:00
Enrico Weigelt, metux IT consult a922a24454 drivers: gpio: amd8111: prefer dev_err()/dev_info() over raw printk
For logging in device contexts, dev_*() functions are preferred over
raw printk(), which also print out device name.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201203182423.5499-2-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-08 09:41:32 +01:00
Enrico Weigelt, metux IT consult 3bf1d26c8a drivers: gpio: bt8xx: prefer dev_err()/dev_warn() over of raw printk
For logging in device contexts, dev_*() functions are preferred over
raw printk(), which also print out device name.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Link: https://lore.kernel.org/r/20201203182423.5499-1-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-08 09:41:32 +01:00
Linus Walleij dd0fa81143 gpio: Add TODO item for debugfs interface
The idea to create a debugfs to replace the aging and
dangerous sysfs ABI for hacking and tinkering came up
on the list.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201204083533.65830-1-linus.walleij@linaro.org
2020-12-06 00:13:17 +01:00
Enrico Weigelt c47d9e1b73 gpio: just plain warning when nonexisting gpio requested
When trying to export an nonexisting gpio ID, the kernel prints out a
big warning w/ stacktrace, sounding like a huge problem. In fact it's
a pretty normal situation, like file or device not found.

So, just print a more relaxed warning instead.

changes v2: drop defining pr_fmt()

Signed-off-by: Enrico Weigelt <info@metux.net>
Link: https://lore.kernel.org/r/20201202133754.32045-1-info@metux.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 23:27:01 +01:00
Kent Gibson 26d060e47e gpiolib: cdev: allow edge event timestamps to be configured as REALTIME
Using CLOCK_REALTIME as the source for event timestamps is crucial for
some specific applications, particularly those requiring timetamps
relative to a PTP clock, so provide an option to switch the event
timestamp source from the default CLOCK_MONOTONIC to CLOCK_REALTIME.

Note that CLOCK_REALTIME was the default source clock for GPIO until
Linux 5.7 when it was changed to CLOCK_MONOTONIC due to issues with the
shifting of the realtime clock.
Providing this option maintains the CLOCK_MONOTONIC as the default,
while also providing a path forward for those dependent on the pre-5.7
behaviour.

Suggested-by: Jack Winch <sunt.un.morcov@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20201014231158.34117-2-warthog618@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 23:22:47 +01:00
Daniel Palmer 93224edf0b gpio: msc313: MStar MSC313 GPIO driver
This adds a driver that supports the GPIO block found in
MStar/SigmaStar ARMv7 SoCs.

The controller seems to have enough register for 128 lines
but where they are wired up differs between chips and
no currently known chip uses anywhere near 128 lines so there
needs to be some per-chip data to collect together what lines
actually have physical pins attached and map the right names to them.

The core peripherals seem to use the same lines on the
currently known chips but the lines used for the sensor
interface, lcd controller etc pins seem to be totally
different between the infinity and mercury chips

The code tries to collect all of the re-usable names,
offsets etc together so that it's easy to build the extra
per-chip data for other chips in the future.

So far this only supports the MSC313 and MSC313E chips.

Support for the SSC8336N (mercury5) is trivial to add once
all of the lines have been mapped out.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201129110803.2461700-4-daniel@0x0f.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-05 22:41:22 +01:00
Fabio Estevam 105e051f1a gpio: mxs: Remove unused .id_table support
mxs is a devicetree-only platform and hence it does not make use
of the id_table mechanism.

Get rid of the .id_table as it is unused.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201118191938.32693-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-04 09:08:54 +01:00
Linus Walleij c4e1f7d92c gpio: tegra186: Set affinity callback to parent
This assigns the .irq_set_affinity to the parent callback.
I assume the Tegra186 is an SMP system so this would be
beneficial.

I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patch.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>
Link: https://lore.kernel.org/r/20201117213351.249668-2-linus.walleij@linaro.org
2020-12-04 09:05:12 +01:00
Linus Walleij 011a78c194 gpio: sifive: Set affinity callback to parent
This assigns the .irq_set_affinity to the parent callback.
I assume the sifive GPIO can be used in systems with
SMP.

I used the pattern making the hirerarchy tolerant for missing
parent as in Marc's earlier patches.

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Yash Shah <yash.shah@sifive.com>
Cc: Wesley W. Terpstra <wesley@sifive.com>
Link: https://lore.kernel.org/r/20201117213351.249668-1-linus.walleij@linaro.org
2020-12-04 09:05:12 +01:00
Linus Walleij 3b4feb2115 gpio: sysfs: Enforce character device
If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.

If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.

Also only show this obsolete option to expert users.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org
2020-12-04 09:03:44 +01:00
Baruch Siach 48f32a8353 gpio: mvebu: switch pwm duration registers to regmap
Commit 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
changed most readl/writel registers access calls to the regmap API in
preparation for Armada 7K/8K support. PWM duration registers were left using
readl/writel, as the driver does not support PWM for Armada 7K/8K.

Switch PWM duration registers to regmap as first step in adding Armada 7K/8K
PWM functionality support.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:08:21 +01:00
Baruch Siach 64b19f6abe gpio: mvebu: update Armada XP per-CPU comment
Commit 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
introduced percpu_regs to replace percpu_membase. Update the comment to
match.

Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes: 2233bf7a92 ("gpio: mvebu: switch to regmap for register access")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:08:13 +01:00
Baruch Siach 7ee1a01e47 gpio: mvebu: fix potential user-after-free on probe
When mvebu_pwm_probe() fails IRQ domain is not released. Move pwm probe
before IRQ domain allocation. Add pwm cleanup code to the failure path.

Fixes: 757642f9a5 ("gpio: mvebu: Add limited PWM support")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 12:01:51 +01:00
Qinglang Miao 7f57b295f9 gpio: zynq: fix reference leak in zynq_gpio functions
pm_runtime_get_sync will increment pm usage counter even it
failed. Forgetting to putting operation will result in a
reference leak here.

A new function pm_runtime_resume_and_get is introduced in
[0] to keep usage counter balanced. So We fix the reference
leak by replacing it with new funtion.

[0] dd8088d5a8 ("PM: runtime: Add  pm_runtime_resume_and_get to deal with usage counter")

Fixes: c2df3de0d0 ("gpio: zynq: properly support runtime PM for GPIO used as interrupts")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:41:02 +01:00
Edmond Chung 6dbbf84603 gpiolib: Don't free if pin ranges are not defined
A similar check was added in gpiochip_generic_request, but not in free.
This has caused an imbalance count of request vs. free calls to the
pinctrl driver. This patch is targeted to fix that issue.

Fixes: 2ab73c6d83 ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Edmond Chung <edmondchung@google.com>
Signed-off-by: Andrew Chant <achant@google.com>
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:55 +01:00
Luo Jiaxing 60593df667 gpio: dwapb: fix NULL pointer dereference at dwapb_gpio_suspend()
Following Calltrace is found when running echo freeze > /sys/power/state.

[  272.755506] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
[  272.755585] Call trace:
[  272.755587]  dwapb_gpio_suspend+0x18/0x318
[  272.755588]  pm_generic_suspend+0x2c/0x48
[  272.755595]  acpi_subsys_suspend+0x60/0x70
[  272.755599]  dpm_run_callback.isra.18+0x40/0xe0
[  272.755601]  __device_suspend+0xf4/0x360

The reason is platform_set_drvdata() is deleted, and dwapb_gpio_suspend()
get *gpio by dev_get_drvdata().

Fixes: feeaefd378 ("gpio: dwapb: Use resource managed GPIO-chip add data method")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:54 +01:00
Zheng Liang 0ac22098de gpio: arizona: disable pm_runtime in case of failure
pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced.

Fixes:27a49ed17e224(gpio: arizona: Add support for GPIOs that)
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Liang <zhengliang6@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02 10:40:54 +01:00
Grygorii Strashko 3cc1fb7399 gpiolib: do not print err message for EPROBE_DEFER
The gpiochip may have dependencies from pinmux and so got deferred. Now it
will print error message every time -EPROBE_DEFER is returned which is
unnecessary:

"gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517"

Hence, do suppress error message for -EPROBE_DEFER case.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 19:02:12 +01:00
Gustavo A. R. Silva d49ee56292 gpio: ath79: Fix fall-through warning for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by explicitly adding a fallthrough pseudo-keyword to indicate
that the code is intended to fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 15:49:50 +01:00
Gustavo A. R. Silva bc5d098432 gpiolib: acpi: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-01 15:48:21 +01:00
Grygorii Strashko 2ae136a34f gpio: omap: handle deferred probe with dev_err_probe() for gpiochip_add_data()
The gpiochip_add_data() may return -EPROBE_DEFER which is not handled
properly by TI GPIO driver and causes unnecessary boot log messages.

Hence, add proper deferred probe handling with new dev_err_probe() API.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:38:28 +01:00
Alexandru Ardelean 0aa4237008 gpio: xra1403: remove unneeded spi_set_drvdata()
There is no matching spi_get_drvdata() call in the driver, so there is no
need to do spi_set_drvdata(). This looks like it probably was copied from a
driver that used both spi_set_drvdata() & spi_get_drvdata().

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:36:36 +01:00
Damien Le Moal 7d3615ae40 gpio: dwapb: Remove unnecessary error message
In dwapb_get_reset(), if devm_reset_control_get_optional_shared() fails,
an error message is printed even if the failure is the benign
EPROBE_DEFER error due to the reset controller not yet being
initialized. Use dev_err_probe() to handle
devm_reset_control_get_optional_shared() errors to avoid unnecessarilly
printing an error message for the deferred probe error.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-30 17:35:01 +01:00
Bartosz Golaszewski 5300ebb695 gpio: exar: use devm action for freeing the IDA and drop remove()
We can simplify the error path in probe() and drop remove() entirely if
we provide a devm action for freeing the device ID.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 36fb7218e8 gpio: exar: switch to using regmap
We can simplify the code in gpio-exar by using regmap. This allows us to
drop the mutex (regmap provides its own locking) and we can also reuse
regmap's bit operations instead of implementing our own update function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 696868d0a7 gpio: exar: unduplicate address and offset computation
Provide and use helpers for calculating the register address and bit
offset instead of hand coding it in every function.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 0c2c7e1323 gpio: exar: use a helper variable for &pdev->dev
It's more elegant to use a helper local variable to store the address
of the underlying struct device than to dereference pdev everywhere. It
also has the benefit of avoiding unnecessary line breaks.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 8e27c2aef8 gpio: exar: switch to a simpler IDA interface
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.

ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 26ced453a5 gpio: exar: include idr.h
This driver uses IDA APIs but doesn't include the relevant header. This
fixes it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Bartosz Golaszewski 1bfaf1299c gpio: exar: add a newline after the copyright notice
It's customary to have a newline between the copyright header and the
includes. Add one to gpio-exar.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-11-25 15:36:52 +01:00
Michał Mirosław a233d4ebfc gpio: tps65910: use regmap accessors
Use regmap accessors directly for register manipulation - removing one
layer of abstraction.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-11-19 08:34:22 +00:00
Greentime Hu f52d6d8b43 gpio: sifive: To get gpio irq offset from device tree data
We can get hwirq number of the gpio by its irq_data->hwirq so that we don't
need to add more macros for different platforms. This patch is tested in
SiFive Unleashed board and SiFive Unmatched board.

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-11-18 09:28:43 +01:00
Fabio Estevam 0f2c7af45d gpio: mxc: Convert the driver to DT-only
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:52:22 +01:00
Srinivas Neeli bea67aeab0 gpio: gpio-xilinx: Check return value of of_property_read_u32
In two different instances the return value of "of_property_read_u32"
API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any error.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Addresses-Coverity: "check_return"
Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:52:22 +01:00
Srinivas Neeli 0230a41ed6 gpio: gpio-xilinx: Add remove function
Added remove function support.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-7-git-send-email-srinivas.neeli@xilinx.com
[dropped pm disable call]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 08:51:52 +01:00
Srinivas Neeli 65bbe531b5 gpio: gpio-xilinx: Add clock support
Adds clock support to the Xilinx GPIO driver.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-4-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 00:59:37 +01:00
Srinivas Neeli 8c669fe69a gpio: gpio-xilinx: Arrange headers in sorting order
Arrange header files in sorted order.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-2-git-send-email-srinivas.neeli@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-11-18 00:57:27 +01:00
Andy Shevchenko 2c4d00cb8f gpiolib: acpi: Use BIT() macro to increase readability
We may use BIT() macro to increase readability in
acpi_gpio_adr_space_handler().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-11-16 14:14:35 +02:00