Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make config_item_type structures const as they are either passed to a
function having the argument as const or stored in the const "ci_type"
field of a config_item structure.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This function was only for debugging. It would be
called in a condition that should not happen, and
should probably have been removed from the final
version of the original commit.
Remove it because it does mutex lock under spin lock.
Signed-off-by: David Teigland <teigland@redhat.com>
Call schedule() here could make the thread miss wake
up from kthread_stop(), so it is better to recheck
kthread_should_stop() before call schedule(), a symptom
happened when I run indefinite test (which mostly created
clustered raid1, assemble it in other nodes, then stop
them) of clustered raid.
$ ps aux|grep md|grep D
root 4211 0.0 0.0 19760 2220 ? Ds 02:58 0:00 mdadm -Ssq
$ cat /proc/4211/stack
kthread_stop+0x4d/0x150
dlm_recoverd_stop+0x15/0x20 [dlm]
dlm_release_lockspace+0x2ab/0x460 [dlm]
leave+0xbf/0x150 [md_cluster]
md_cluster_stop+0x18/0x30 [md_mod]
bitmap_free+0x12e/0x140 [md_mod]
bitmap_destroy+0x7f/0x90 [md_mod]
__md_stop+0x21/0xa0 [md_mod]
do_md_stop+0x15f/0x5c0 [md_mod]
md_ioctl+0xa65/0x18a0 [md_mod]
blkdev_ioctl+0x49e/0x8d0
block_ioctl+0x41/0x50
do_vfs_ioctl+0x96/0x5b0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1e/0xad
This maybe not resolve the issue completely since the
KTHREAD_SHOULD_STOP flag could be set between "break"
and "schedule", but at least the chance for the symptom
happen could be reduce a lot (The indefinite test runs
more than 20 hours without problem and it happens easily
without the change).
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The writequeue and writequeue_lock member of othercon was not initialized.
If lowcomms_state_change() is called from network layer, othercon->swork
may be scheduled. In this case, send_to_sock() will generate a NULL pointer
reference. We avoid this problem by correctly initializing writequeue and
writequeue_lock member of othercon.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When an error occurs in kernel_recvmsg or kernel_sendpage and
close_connection is called and receive work is already scheduled,
receive work is canceled. In that case, the receive work will not
be scheduled forever after reconnection, because CF_READ_PENDING
flag is established.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In the current implementation, we think that exclusion control between
processing to set the callback function to the connection structure and
processing to refer to the connection structure from the callback function
was not enough. We fix them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
dlm_cb_seq is 64 bits. If dlm_cb_seq overflows and returns to 0,
dlm_rem_lkb_callback() will not work properly.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
The sk member of the socket generated by sock_create_kern() is overwritten
by ops->accept(). So the previous sk will not be released.
We use kernel_accept() instead of sock_create_kern() and ops->accept().
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When the DLM_LKF_NODLCKWT flag was set, even if conversion deadlock
was detected, the caller of can_be_granted() was unknown.
We change the behavior of can_be_granted() and change it to detect
conversion deadlock regardless of whether the DLM_LKF_NODLCKWT flag
is set or not. And depending on whether the DLM_LKF_NODLCKWT flag
is set or not, we change the behavior at the caller of can_be_granted().
This fix has no effect except when using DLM_LKF_NODLCKWT flag.
Currently, ocfs2 uses the DLM_LKF_NODLCKWT flag and does not expect a
cancel operation from conversion deadlock when calling dlm_lock().
ocfs2 is implemented to perform a cancel operation by requesting
BASTs (callback).
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If reconnection fails while executing dlm_lowcomms_stop,
dlm_send will not stop.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
CF_WRITE_PENDING flag has been reanimated to make dlm_send stop properly
when running dlm_lowcomms_stop.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When dlm_recoverd_stop() is called between kthread_should_stop() and
set_task_state(TASK_INTERRUPTIBLE), dlm_recoverd will not wake up.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If an error occurs in the sending / receiving process, if othercon
exists, sending / receiving processing using othercon may also result
in an error. We fix to pre-close othercon as well.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If a node sends a DLM_RCOM_STATUS command and an error occurs on the
receiving side, the DLM_RCOM_STATUS_REPLY response may not be returned.
We retransmitted the DLM_RCOM_STATUS command so that we do not wait for
an infinite response.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In the current implementation, we think that exclusion control
for othercon in tcp_accept_from_sock() and sctp_accept_from_sock()
was not enough. We fix them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When kernel_sendpage(in send_to_sock) and kernel_recvmsg
(in receive_from_sock) return error, close_connection may works at the
same time. At that time, they may wait for each other by cancel_work_sync.
Signed-off-by: Tadashi Miyauchi <miayuchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
save_cb argument is not used. We remove them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In a previous patch I noted that accept() often copies the struct
sock (sk) which overwrites the sock callbacks. However, in testing
we discovered that the dlm connection structures (con) are sometimes
deleted and recreated as connections come and go, and since they're
zeroed out by kmem_cache_zalloc, the saved callback pointers are
also initialized to zero. But with today's DLM code, the callbacks
are only saved when a socket is added.
During recovery testing, we discovered a common situation in which
the new con is initialized to zero, then a socket is added after
accept(). In this case, the sock's saved values are all NULL, but
the saved values are wiped out, due to accept(). Therefore, we
don't have a known good copy of the callbacks from which we can
restore.
Since the struct sock callbacks are always good after listen(),
this patch saves the known good values after listen(). These good
values are then used for subsequent restores.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
Before this patch, there was a flag in the con structure that was
used to determine whether or not a connect was needed. The bit was
set here and there, and cleared here and there, so it left some
race conditions: the bit was set, work was queued, then the worker
cleared the bit, allowing someone else to set it while the worker
ran. For the most part, this worked okay, but we got into trouble
if connections were lost and it needed to reconnect.
This patch eliminates the flag in favor of simply checking if we
actually have a sock pointer while protected by the mutex.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
-----BEGIN PGP SIGNATURE-----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=VPMU
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"This pile just has a few file locking fixes from Ben Coddington. There
are a couple of cleanup patches + an attempt to bring sanity to the
l_pid value that is reported back to userland on an F_GETLK request.
After a few gyrations, he came up with a way for filesystems to
communicate to the VFS layer code whether the pid should be translated
according to the namespace or presented as-is to userland"
* tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: restore a warn for leaked locks on close
fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks
fs/locks: Use allocation rather than the stack in fcntl_getlk()
Declare kset_uevent_ops structure as const as it is only passed as an
argument to the function kset_create_and_add. This argument is of type
const, so declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Print a message when a cluster name is not specified by
the caller. In this case the cluster name configured
for the dlm is used without any validation that it is
the cluster expected by the application.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The local variable "rv" is reassigned by a statement at the beginning.
Thus omit the explicit initialisation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of two data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
* Multiplications for the size determination of memory allocations
indicated that array data structures should be processed.
Thus reuse the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
* Replace the specification of data structures by pointer dereferences
to make the corresponding size determinations a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data type by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
The script "checkpatch.pl" pointed information out like the following.
CHECK: spaces preferred around that '+' (ctx:VxV)
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Six single characters (line breaks) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
This change will try to make this error message more clear,
since the upper applications (e.g. ocfs2) invoke dlm_new_lockspace
to create a new lockspace with passing a cluster name. Sometimes,
dlm_new_lockspace return failure while two cluster names dismatch,
the user is a little confused since this line error message is not
enough obvious.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Clear the 'unused' field and the uninitialized padding in 'lksb' to
avoid leaking memory to userland in copy_result_to_user().
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Since commit c69899a17c "NFSv4: Update of VFS byte range lock must be
atomic with the stateid update", NFSv4 has been inserting locks in rpciod
worker context. The result is that the file_lock's fl_nspid is the
kworker's pid instead of the original userspace pid.
The fl_nspid is only used to represent the namespaced virtual pid number
when displaying locks or returning from F_GETLK. There's no reason to set
it for every inserted lock, since we can usually just look it up from
fl_pid. So, instead of looking up and holding struct pid for every lock,
let's just look up the virtual pid number from fl_pid when it is needed.
That means we can remove fl_nspid entirely.
The translaton and presentation of fl_pid should handle the following four
cases:
1 - F_GETLK on a remote file with a remote lock:
In this case, the filesystem should determine the l_pid to return here.
Filesystems should indicate that the fl_pid represents a non-local pid
value that should not be translated by returning an fl_pid <= 0.
2 - F_GETLK on a local file with a remote lock:
This should be the l_pid of the lock manager process, and translated.
3 - F_GETLK on a remote file with a local lock, and
4 - F_GETLK on a local file with a local lock:
These should be the translated l_pid of the local locking process.
Fuse was already doing the correct thing by translating the pid into the
caller's namespace. With this change we must update fuse to translate
to init's pid namespace, so that the locks API can then translate from
init's pid namespace into the pid namespace of the caller.
With this change, the locks API will expect that if a filesystem returns
a remote pid as opposed to a local pid for F_GETLK, that remote pid will
be <= 0. This signifies that the pid is remote, and the locks API will
forego translating that pid into the pid namespace of the local calling
process.
Finally, we convert remote filesystems to present remote pids using
negative numbers. Have lustre, 9p, ceph, cifs, and dlm negate the remote
pid returned for F_GETLK lock requests.
Since local pids will never be larger than PID_MAX_LIMIT (which is
currently defined as <= 4 million), but pid_t is an unsigned int, we
should have plenty of room to represent remote pids with negative
numbers if we assume that remote pid numbers are similarly limited.
If this is not the case, then we run the risk of having a remote pid
returned for which there is also a corresponding local pid. This is a
problem we have now, but this patch should reduce the chances of that
occurring, while also returning those remote pid numbers, for whatever
that may be worth.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Lockdep issues a circular dependency warning when AFS issues an operation
through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem.
The theory lockdep comes up with is as follows:
(1) If the pagefault handler decides it needs to read pages from AFS, it
calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but
creating a call requires the socket lock:
mmap_sem must be taken before sk_lock-AF_RXRPC
(2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind()
binds the underlying UDP socket whilst holding its socket lock.
inet_bind() takes its own socket lock:
sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET
(3) Reading from a TCP socket into a userspace buffer might cause a fault
and thus cause the kernel to take the mmap_sem, but the TCP socket is
locked whilst doing this:
sk_lock-AF_INET must be taken before mmap_sem
However, lockdep's theory is wrong in this instance because it deals only
with lock classes and not individual locks. The AF_INET lock in (2) isn't
really equivalent to the AF_INET lock in (3) as the former deals with a
socket entirely internal to the kernel that never sees userspace. This is
a limitation in the design of lockdep.
Fix the general case by:
(1) Double up all the locking keys used in sockets so that one set are
used if the socket is created by userspace and the other set is used
if the socket is created by the kernel.
(2) Store the kern parameter passed to sk_alloc() in a variable in the
sock struct (sk_kern_sock). This informs sock_lock_init(),
sock_init_data() and sk_clone_lock() as to the lock keys to be used.
Note that the child created by sk_clone_lock() inherits the parent's
kern setting.
(3) Add a 'kern' parameter to ->accept() that is analogous to the one
passed in to ->create() that distinguishes whether kernel_accept() or
sys_accept4() was the caller and can be passed to sk_alloc().
Note that a lot of accept functions merely dequeue an already
allocated socket. I haven't touched these as the new socket already
exists before we get the parameter.
Note also that there are a couple of places where I've made the accepted
socket unconditionally kernel-based:
irda_accept()
rds_rcp_accept_one()
tcp_accept_from_sock()
because they follow a sock_create_kern() and accept off of that.
Whilst creating this, I noticed that lustre and ocfs don't create sockets
through sock_create_kern() and thus they aren't marked as for-kernel,
though they appear to be internal. I wonder if these should do that so
that they use the new set of lock keys.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix up affected files that include this signal functionality via sched.h.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
No point in going through loops and hoops instead of just comparing the
values.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This set fixes error reporting for dlm sockets, removes the unbound
property on the dlm callback workqueue to improve performance, and
includes a couple trivial changes.
-----BEGIN PGP SIGNATURE-----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=4ZWQ
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm fixes from David Teigland:
"This set fixes error reporting for dlm sockets, removes the unbound
property on the dlm callback workqueue to improve performance, and
includes a couple trivial changes"
* tag 'dlm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix error return code in sctp_accept_from_sock()
dlm: don't specify WQ_UNBOUND for the ast callback workqueue
dlm: remove lock_sock to avoid scheduling while atomic
dlm: don't save callbacks after accept
dlm: audit and remove any unnecessary uses of module.h
dlm: make genl_ops const
Now genl_register_family() is the only thing (other than the
users themselves, perhaps, but I didn't find any doing that)
writing to the family struct.
In all families that I found, genl_register_family() is only
called from __init functions (some indirectly, in which case
I've add __init annotations to clarifly things), so all can
actually be marked __ro_after_init.
This protects the data structure from accidental corruption.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of providing macros/inline functions to initialize
the families, make all users initialize them statically and
get rid of the macros.
This reduces the kernel code size by about 1.6k on x86-64
(with allyesconfig).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static family IDs have never really been used, the only
use case was the workaround I introduced for those users
that assumed their family ID was also their multicast
group ID.
Additionally, because static family IDs would never be
reserved by the generic netlink code, using a relatively
low ID would only work for built-in families that can be
registered immediately after generic netlink is started,
which is basically only the control family (apart from
the workaround code, which I also had to add code for so
it would reserve those IDs)
Thus, anything other than GENL_ID_GENERATE is flawed and
luckily not used except in the cases I mentioned. Move
those workarounds into a few lines of code, and then get
rid of GENL_ID_GENERATE entirely, making it more robust.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes the WQ_UNBOUND flag (which implies WQ_HIGHPRI)
from the DLM's ast work queue, in favor of just WQ_HIGHPRI.
This has been shown to cause a 19 percent performance increase for
simultaneous inode creates on GFS2 with fs_mark.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Before this patch, functions save_callbacks and restore_callbacks
called function lock_sock and release_sock to prevent other processes
from messing with the struct sock while the callbacks were saved and
restored. However, function add_sock calls write_lock_bh prior to
calling it save_callbacks, which disables preempts. So the call to
lock_sock would try to schedule when we can't schedule.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When DLM calls accept() on a socket, the comm code copies the sk
after we've saved its callbacks. Afterward, it calls add_sock which
saves the callbacks a second time. Since the error reporting function
lowcomms_error_report calls the previous callback too, this results
in a recursive call to itself. This patch adds a new parameter to
function add_sock to tell whether to save the callbacks. Function
tcp_accept_from_sock (and its sctp counterpart) then calls it with
false to avoid the recursion.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Historically a lot of these existed because we did not have
a distinction between what was modular code and what was providing
support to modules via EXPORT_SYMBOL and friends. That changed
when we forked out support for the latter into the export.h file.
This means we should be able to reduce the usage of module.h
in code that is obj-y Makefile or bool Kconfig.
In the case of some code where it is modular, we can extend that to
also include files that are building basic support functionality but
not related to loading or registering the final module; such files
also have no need whatsoever for module.h
The advantage in removing such instances is that module.h itself
sources about 15 other headers; adding significantly to what we feed
cpp, and it can obscure what headers we are effectively using.
Since module.h might have been the implicit source for init.h
(for __init) and for export.h (for EXPORT_SYMBOL) we consider each
instance for the presence of either and replace as needed.
In the dlm case, we remove module.h from a global header and only
introduce it in the files where it is explicitly required, since
there is nothing modular in dlm_internal.h itself.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This table contains function points and should be const.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Teigland <teigland@redhat.com>
After backporting commit ee44b4bc05 ("dlm: use sctp 1-to-1 API")
series to a kernel with an older workqueue which didn't use RCU yet, it
was noticed that we are freeing the workqueues in dlm_lowcomms_stop()
too early as free_conn() will try to access that memory for canceling
the queued works if any.
This issue was introduced by commit 0d737a8cfd as before it such
attempt to cancel the queued works wasn't performed, so the issue was
not present.
This patch fixes it by simply inverting the free order.
Cc: stable@vger.kernel.org
Fixes: 0d737a8cfd ("dlm: fix race while closing connections")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
With the current kernel, `dlm_tool lockdebug` fails as below:
"dlm_tool lockdebug ED0BD86DCE724393918A1AE8FDBF1EE3
can't open /sys/kernel/debug/dlm/ED0BD86DCE724393918A1AE8FDBF1EE3:
Operation not permitted"
This is because table_open() depends on file->f_op to tell which
seq_file ops should be passed down. But, the original file ops in
file->f_op is replaced by "debugfs_full_proxy_file_operations" with
commit 49d200deaa ("debugfs: prevent access to removed files'
private data").
Currently, I can think up 2 solutions: 1st, replace
debugfs_create_file() with debugfs_create_file_unsafe();
2nd, make different table_open#() accordingly. The 1st one
is neat, but I don't thoroughly understand its risk. Maybe
someone has a better one.
Signed-off-by: Eric Ren <zren@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace calls to kmalloc followed by a memcpy with a direct call to
kmemdup.
The Coccinelle semantic patch used to make this change is as follows:
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This config option can be used to disable the
LOG_INFO recovery messages.
Signed-off-by: Zhilong Liu <zlliu@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1ae1602de0 "configfs: switch ->default groups to a linked list"
left the NULL gps pointer behind after removing the kcalloc() call which
made it non-NULL. It also left the !gps check in place so make_cluster()
now fails with ENOMEM. Remove the remaining uses of the gps variable to
fix that.
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Previous changes introduced the use of socket error reporting
for dlm sockets. This set includes two fixes in how the
socket error callbacks are used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qvzY
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"Previous changes introduced the use of socket error reporting for dlm
sockets. This set includes two fixes in how the socket error
callbacks are used"
* tag 'dlm-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
DLM: Save and restore socket callbacks properly
DLM: Replace nodeid_to_addr with kernel_getpeername
Replace the current NULL-terminated array of default groups with a linked
list. This gets rid of lots of nasty code to size and/or dynamically
allocate the array.
While we're at it also provide a conveniant helper to remove the default
groups.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Felipe Balbi <balbi@kernel.org> [drivers/usb/gadget]
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Nicholas Bellinger <nab@linux-iscsi.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
This patch fixes the problems with patch b3a5bbfd7.
1. It removes a return statement from lowcomms_error_report
because it needs to call the original error report in all paths
through the function.
2. All socket callbacks are saved and restored, not just the
sk_error_report, and that's done so with proper locking like
sunrpc does.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch replaces the call to nodeid_to_addr with a call to
kernel_getpeername. This avoids taking a spinlock because it may
potentially be called from a softirq context.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
it's "bugger off if we got ERR_PTR", not the other way round...
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch is a cleanup to make following patch easier to
review.
Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()
To ease backports, we rename both constants.
Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI target updates from Nicholas Bellinger:
"This series contains HCH's changes to absorb configfs attribute
->show() + ->store() function pointer usage from it's original
tree-wide consumers, into common configfs code.
It includes usb-gadget, target w/ drivers, netconsole and ocfs2
changes to realize the improved simplicity, that now renders the
original include/target/configfs_macros.h CPP magic for fabric drivers
and others, unnecessary and obsolete.
And with common code in place, new configfs attributes can be added
easier than ever before.
Note, there are further improvements in-flight from other folks for
v4.5 code in configfs land, plus number of target fixes for post -rc1
code"
In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").
This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull. As Alexander says about
that patch:
"There's no need to keep an extra wrapper structure per item and the
awkward show_attribute/store_attribute item ops are no longer needed.
This patch converts policy code to the new api, all the while making
the code quite a bit smaller and easier on the eyes.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"
That patch was folded into the merge so that the tree should be fully
bisectable.
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
configfs: remove old API
ocfs2/cluster: use per-attribute show and store methods
ocfs2/cluster: move locking into attribute store methods
netconsole: use per-attribute show and store methods
target: use per-attribute show and store methods
spear13xx_pcie_gadget: use per-attribute show and store methods
dlm: use per-attribute show and store methods
usb-gadget/f_serial: use per-attribute show and store methods
usb-gadget/f_phonet: use per-attribute show and store methods
usb-gadget/f_obex: use per-attribute show and store methods
usb-gadget/f_uac2: use per-attribute show and store methods
usb-gadget/f_uac1: use per-attribute show and store methods
usb-gadget/f_mass_storage: use per-attribute show and store methods
usb-gadget/f_sourcesink: use per-attribute show and store methods
usb-gadget/f_printer: use per-attribute show and store methods
usb-gadget/f_midi: use per-attribute show and store methods
usb-gadget/f_loopback: use per-attribute show and store methods
usb-gadget/ether: use per-attribute show and store methods
usb-gadget/f_acm: use per-attribute show and store methods
usb-gadget/f_hid: use per-attribute show and store methods
...
This includes one simple fix to make posix locks
interruptible by signals in cases where a signal
handler is used.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m+FJ
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm update from David Teigland:
"This includes one simple fix to make posix locks interruptible by
signals in cases where a signal handler is used"
* tag 'dlm-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: make posix locks interruptible
Replace wait_event_killable with wait_event_interruptible
so that a program waiting for a posix lock can be
interrupted by a signal. With the killable version,
a program was not interruptible by a signal if it
had a signal handler set for it, overriding the default
action of terminating the process.
Signed-off-by: Eric Ren <zren@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait(). This
allows for some later cleanup.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
To simplify the configfs interface and remove boilerplate code that also
causes binary bloat.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Teigland <teigland@redhat.com
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
This set mainly includes a change to the way the
dlm uses the SCTP API in the kernel, removing the
direct dependency on the sctp module. Other odd
SCTP-related fixes are also included. The other
notable fix is for a long standing regression in
the behavior of lock value blocks for user space
locks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iYRu
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set mainly includes a change to the way the dlm uses the SCTP API
in the kernel, removing the direct dependency on the sctp module.
Other odd SCTP-related fixes are also included.
The other notable fix is for a long standing regression in the
behavior of lock value blocks for user space locks"
* tag 'dlm-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: print error from kernel_sendpage
dlm: fix lvb copy for user locks
dlm: sctp_accept_from_sock() can be static
dlm: fix reconnecting but not sending data
dlm: replace BUG_ON with a less severe handling
dlm: use sctp 1-to-1 API
dlm: fix not reconnecting on connecting error handling
dlm: fix race while closing connections
dlm: fix connection stealing if using SCTP
Print a dlm-specific error when a socket error occurs
when sending a dlm message.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
For a userland lock request, the previous and current
lock modes are used to decide when the lvb should be
copied back to the user. The wrong previous value was
used, so that it always matched the current value.
This caused the lvb to be copied back to the user in
the wrong cases.
Signed-off-by: David Teigland <teigland@redhat.com>
There are cases on which lowcomms_connect_sock() is called directly,
which caused the CF_WRITE_PENDING flag to not bet set upon reconnect,
specially on send_to_sock() error handling. On this last, the flag was
already cleared and no further attempt on transmitting would be done.
As dlm tends to connect when it needs to transmit something, it makes
sense to always mark this flag right after the connect.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
BUG_ON() is a severe action for this case, specially now that DLM with
SCTP will use 1 socket per association. Instead, we can just close the
socket on this error condition and return from the function.
Also move the check to an earlier stage as it won't change and thus we
can abort as soon as possible.
Although this issue was reported when still using SCTP with 1-to-many
API, this cleanup wouldn't be that simple back then because we couldn't
close the socket and making sure such event would cease would be hard.
And actually, previous code was closing the association, yet SCTP layer
is still raising the new data event. Probably a bug to be fixed in SCTP.
Reported-by: <tan.hu@zte.com.cn>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
DLM is using 1-to-many API but in a 1-to-1 fashion. That is, it's not
needed but this causes it to use sctp_do_peeloff() to mimic an
kernel_accept() and this causes a symbol dependency on sctp module.
By switching it to 1-to-1 API we can avoid this dependency and also
reduce quite a lot of SCTP-specific code in lowcomms.c.
The caveat is that now DLM won't always use the same src port. It will
choose a random one, just like TCP code. This allows the peers to
attempt simultaneous connections, which now are handled just like for
TCP.
Even more sharing between TCP and SCTP code on DLM is possible, but it
is intentionally left for a later commit.
Note that for using nodes with this commit, you have to have at least
the early fixes on this patchset otherwise it will trigger some issues
on old nodes.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
If we don't clear that bit, lowcomms_connect_sock() will not schedule
another attempt, and no further attempt will be done.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When a connection have issues DLM may need to close it. Therefore we
should also cancel pending workqueues for such connection at that time,
and not just when dlm is not willing to use this connection anymore.
Also, if we don't clear CF_CONNECT_PENDING flag, the error handling
routines won't be able to re-connect as lowcomms_connect_sock() will
check for it.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When using SCTP and accepting a new connection, DLM currently validates
if the peer trying to connect to it is one of the cluster nodes, but it
doesn't check if it already has a connection to it or not.
If it already had a connection, it will be overwritten, and the new one
will be used for writes, possibly causing the node to leave the cluster
due to communication breakage.
Still, one could DoS the node by attempting N connections and keeping
them open.
As said, but being explicit, both situations are only triggerable from
other cluster nodes, but are doable with only user-level perms.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
With well over 200+ users of this api, there are a mere 12 users that
actually checked the return value of this function. And all of them
really didn't do anything with that information as the system or module
was shutting down no matter what.
So stop pretending like it matters, and just return void from
misc_deregister(). If something goes wrong in the call, you will get a
WARNING splat in the syslog so you know how to fix up your driver.
Other than that, there's nothing that can go wrong.
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is long overdue, and is part of cleaning up how we allocate kernel
sockets that don't reference count struct net.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.
This makes the very common pattern of
if (genlmsg_end(...) < 0) { ... }
be a whole bunch of dead code. Many places also simply do
return nlmsg_end(...);
and the caller is expected to deal with it.
This also commonly (at least for me) causes errors, because it is very
common to write
if (my_function(...))
/* error condition */
and if my_function() does "return nlmsg_end()" this is of course wrong.
Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.
Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did
- return nlmsg_end(...);
+ nlmsg_end(...);
+ return 0;
I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.
One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull VFS changes from Al Viro:
"First pile out of several (there _definitely_ will be more). Stuff in
this one:
- unification of d_splice_alias()/d_materialize_unique()
- iov_iter rewrite
- killing a bunch of ->f_path.dentry users (and f_dentry macro).
Getting that completed will make life much simpler for
unionmount/overlayfs, since then we'll be able to limit the places
sensitive to file _dentry_ to reasonably few. Which allows to have
file_inode(file) pointing to inode in a covered layer, with dentry
pointing to (negative) dentry in union one.
Still not complete, but much closer now.
- crapectomy in lustre (dead code removal, mostly)
- "let's make seq_printf return nothing" preparations
- assorted cleanups and fixes
There _definitely_ will be more piles"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
copy_from_iter_nocache()
new helper: iov_iter_kvec()
csum_and_copy_..._iter()
iov_iter.c: handle ITER_KVEC directly
iov_iter.c: convert copy_to_iter() to iterate_and_advance
iov_iter.c: convert copy_from_iter() to iterate_and_advance
iov_iter.c: get rid of bvec_copy_page_{to,from}_iter()
iov_iter.c: convert iov_iter_zero() to iterate_and_advance
iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds
iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds
iov_iter.c: convert iov_iter_npages() to iterate_all_kinds
iov_iter.c: iterate_and_advance
iov_iter.c: macros for iterating over iov_iter
kill f_dentry macro
dcache: fix kmemcheck warning in switch_names
new helper: audit_file()
nfsd_vfs_write(): use file_inode()
ncpfs: use file_inode()
kill f_dentry uses
lockd: get rid of ->f_path.dentry->d_sb
...
A process may exit, leaving an orphan lock in the lockspace.
This adds the capability for another process to acquire the
orphan lock. Acquiring the orphan just moves the lock from
the orphan list onto the acquiring process's list of locks.
An adopting process must specify the resource name and mode
of the lock it wants to adopt. If a matching lock is found,
the lock is moved to the caller's 's list of locks, and the
lkid of the lock is returned like the lkid of a new lock.
If an orphan with a different mode is found, then -EAGAIN is
returned. If no orphan lock is found on the resource, then
-ENOENT is returned. No async completion is used because
the result is immediately available.
Also, when orphans are purged, allow a zero nodeid to refer
to the local nodeid so the caller does not need to look up
the local nodeid.
Signed-off-by: David Teigland <teigland@redhat.com>
The flags are already converted to le when being sent,
but are not being converted back to cpu when received.
Signed-off-by: Neale Ferguson <neale@sinenomine.net>
Signed-off-by: David Teigland <teigland@redhat.com>
This argument is always NULL so don't pass it around.
[jlayton: remove dependencies on previous patches in series]
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
This fixes checkpatch warning:
WARNING: debugfs_remove(NULL) is safe this check is probably not required
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The connection struct with nodeid 0 is the listening socket,
not a connection to another node. The sctp resend function
was not checking that the nodeid was valid (non-zero), so it
would mistakenly get and resend on the listening connection
when nodeid was zero.
Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace seq_printf where possible. This patch also fixes the following
checkpatch warning "unnecessary whitespace before a quoted newline"
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace obsolete functions
simple_strtoul/kstrtouint
simple_strtol/kstrtoint
(kstr __must_check requires the right function to be applied)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Christine Caulfield <ccaulfie@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Several spots in the kernel perform a sequence like:
skb_queue_tail(&sk->s_receive_queue, skb);
sk->sk_data_ready(sk, skb->len);
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
The log messages relating to the progress of recovery
are minimal and very often useful. Change these to
the KERN_INFO level so they are always available.
Signed-off-by: David Teigland <teigland@redhat.com>
Include appropriate header file fs/dlm/ast.h in fs/dlm/ast.c because it
contains function prototypes of some functions defined in fs/dlm/ast.c.
This also eliminates the following warning in fs/dlm/ast:
fs/dlm/ast.c:52:5: warning: no previous prototype for ‘dlm_add_lkb_callback’ [-Wmissing-prototypes]
fs/dlm/ast.c:113:5: warning: no previous prototype for ‘dlm_rem_lkb_callback’ [-Wmissing-prototypes]
fs/dlm/ast.c:174:6: warning: no previous prototype for ‘dlm_add_cb’ [-Wmissing-prototypes]
fs/dlm/ast.c:212:6: warning: no previous prototype for ‘dlm_callback_work’ [-Wmissing-prototypes]
fs/dlm/ast.c:267:5: warning: no previous prototype for ‘dlm_callback_start’ [-Wmissing-prototypes]
fs/dlm/ast.c:278:6: warning: no previous prototype for ‘dlm_callback_stop’ [-Wmissing-prototypes]
fs/dlm/ast.c:284:6: warning: no previous prototype for ‘dlm_callback_suspend’ [-Wmissing-prototypes]
fs/dlm/ast.c:292:6: warning: no previous prototype for ‘dlm_callback_resume’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David Teigland <teigland@redhat.com>
Greg Kroah-Hartman